Contact

All Stories

  1. Study of the Interaction Between Bismuth and Antimony on Solidification Kinetics, Eutectic Microstructure, and Mechanical Behaviour of Secondary Al–Si–Cu Alloys

    Article • International Journal of Metalcasting, November 2025, Springer Science + Business Media

    Dr Saeed Farahany

  2. Interactive Effect of Bismuth and Antimony on Modification Efficiency of Strontium in ADC12 Die‐Cast Alloy

    Article • Advanced Engineering Materials, November 2025, Wiley

    Dr Saeed Farahany

  3. Tailoring the solidification behaviour of recycled Al–Fe–Si alloy through gadolinium additions: a thermal analysis and microstructural investigation

    Article • Journal of Thermal Analysis and Calorimetry, May 2025, Springer Science + Business Media

    Dr Saeed Farahany

  4. Solidification Characteristics of Ex situ Particulate-Reinforced Aluminum Matrix Composites

    Article • International Journal of Metalcasting, April 2023, Springer Science + Business Media

    Dr Saeed Farahany

  5. On the effect of praseodymium on solidification characteristics, microstructure, and mechanical properties of commercial ADC12 alloy

    Article • Journal of Thermal Analysis and Calorimetry, April 2023, Springer Science + Business Media

    Dr Saeed Farahany

  6. Effect of heat treatment parameters on microstructure, defects, and properties of Al-16Si-6Cu automotive shift fork: quantitative evaluation perspective

    Article • International Journal of Cast Metals Research, May 2022, Taylor & Francis

    Dr Saeed Farahany

  7. A novel method to enhance the performance of an ex-situ Al/Si-YSZ metal matrix composite

    Article • Journal of Alloys and Compounds, May 2020, Elsevier

    Dr Saeed Farahany

  8. Role of Sr on microstructure, mechanical properties, wear and corrosion behaviour of an Al–Mg2Si–Cu in-situ composite

    Article • Materials Chemistry and Physics, January 2020, Elsevier

    Dr Saeed Farahany

  9. Microstructure, phase evolution and corrosion behaviour of the Zn–Al–Mg–Sb alloy coating on steel

    Article • Materials Science and Technology, December 2019, Taylor & Francis

    Dr Ahmad O. Mostafa, Dr Saeed Farahany

  10. Cooling curve thermal analysis of Al–Mg2Si–Cu–xSr composite

    Article • Journal of Thermal Analysis and Calorimetry, December 2019, Springer Science + Business Media

    Dr Saeed Farahany

  11. Machinability characteristics, thermal and mechanical properties of Al-Mg 2 Si in-situ composite with bismuth

    Article • Measurement, November 2017, Elsevier

    Dr Saeed Farahany

  12. Characterization of Phase Formation in Al-20%Mg2Si-2%Cu Metal Matrix Composite

    Article • Solid State Phenomena, September 2017, Trans Tech Publications

    Dr Saeed Farahany

  13. Microstructure development, phase reaction characteristics and properties of quaternary Zn-0.5Al-0.5Mg-xBi hot dipped coating alloy under slow and fast cooling rates

    Article • Surface and Coatings Technology, April 2017, Elsevier

    Dr Saeed Farahany

  14. Fabrication of biodegradable Zn-Al-Mg alloy: Mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities

    Article • Materials Science and Engineering C, April 2017, Elsevier

    Dr Saeed Farahany

  15. Microstructure Characterization, Mechanical, and Tribological Properties of Slow-Cooled Sb-Treated Al-20Mg2Si-Cu In Situ Composites

    Article • Journal of Materials Engineering and Performance, March 2017, Springer Science + Business Media

    Dr Saeed Farahany

  16. Computer-aided cooling curve thermal analysis and microstructural evolution of Mg–5Zn–xY cast alloys

    Article • Journal of Thermal Analysis and Calorimetry, February 2017, Springer Science + Business Media

    Dr Saeed Farahany

  17. Thermal Characteristics, Mechanical Properties, In Vitro Degradation and Cytotoxicity of Novel Biodegradable Zn–Al–Mg and Zn–Al–Mg–xBi Alloys

    Article • Acta Metallurgica Sinica (English Letters), February 2017, Springer Science + Business Media

    Dr Ahmad O. Mostafa, Dr Saeed Farahany

  18. Effect of Wettability Enhancement of SiC Particles on Impact Toughness and Dry Sliding Wear Behavior of Compocasted A356/20SiCp Composites

    Article • Tribology Transactions, January 2017, Taylor & Francis

    Dr Saeed Farahany

  19. Effect of Superheating Melt Treatment on Mg 2 Si Particulate Reinforced in Al-Mg 2 Si-Cu In situ Composite

    Article • Procedia Engineering, January 2017, Elsevier

    Dr Saeed Farahany

  20. Effect of modifier elements on machinability of Al-20%Mg2Si metal matrix composite during dry turning

    Article • Machining Science and Technology, July 2016, Taylor & Francis

    Dr Saeed Farahany

  21. Flake-fibrous transition of silicon in near-eutectic Al-11.7Si-1.8Cu-0.8Zn-0.6Fe-0.3Mg alloy treated with combined effect of bismuth and strontium

    Article • Journal of Alloys and Compounds, January 2016, Elsevier

    Dr Saeed Farahany

  22. Microstructure, mechanical properties and corrosion behavior of Al–Si–Cu–Zn–X (X=Bi, Sb, Sr) die cast alloy

    Article • Transactions of Nonferrous Metals Society of China, January 2016, Elsevier

    Dr Saeed Farahany

  23. Effect of Primary and Eutectic Mg2Si Crystal Modifications on the Mechanical Properties and Sliding Wear Behaviour of an Al–20Mg2Si–2Cu–xBi Composite

    Article • Journal of Material Science and Technology, January 2016, Elsevier

    Dr Saeed Farahany

  24. Combined effect of strontium modifier and antimony refiner on texture and growth mode of eutectic phase in an Al-11Si-2Cu-0.8Zn-0.6Fe cast alloy

    Article • Philosophical Magazine Letters, December 2015, Taylor & Francis

    Dr Saeed Farahany

  25. Evaluation of cutting force and surface roughness in the dry turning of Al–Mg2Si in-situ metal matrix composite inoculated with bismuth using DOE approach

    Article • Measurement, December 2015, Elsevier

    Dr Saeed Farahany

  26. Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn–3Mg alloy as potential biodegradable implant material

    Article • Materials & Design, November 2015, Elsevier

    Dr Saeed Farahany, Hendra Hermawan

  27. Microstructure development, phase reaction characteristics and mechanical properties of a commercial Al–20%Mg2Si–xCe in situ composite solidified at a slow cooling rate

    Article • Journal of Alloys and Compounds, November 2015, Elsevier

    Dr Saeed Farahany

  28. Dry Sliding Wear Behavior of A356-ZrO2 Metal Matrix Composite

    Article • Advanced Materials Research, October 2015, Trans Tech Publications

    Dr Saeed Farahany

  29. Alteration by Cerium Element on Primary and Eutectic Mg2Si Phases in Al-20%Mg2Si In Situ Composite

    Article • Advanced Materials Research, October 2015, Trans Tech Publications

    Dr Saeed Farahany

  30. Effect of Cooling Rate on the Corrosion Behaviour of Zn-Al and Zn-Al-Mg Alloy

    Article • Materials Science Forum, June 2015, Trans Tech Publications

    Esah Hamzah, Dr Saeed Farahany

  31. Fatigue properties of temperature gradient transient liquid phase diffusion bonded Al7075-T6 alloy

    Article • Transactions of Nonferrous Metals Society of China, April 2015, Elsevier

    Dr Saeed Farahany

  32. Effects of Quenching Media on Phase Transformation Characteristics and Hardness of Cu-Al-Ni-Co Shape Memory Alloys

    Article • Journal of Materials Engineering and Performance, February 2015, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi, Dr Saeed Farahany

  33. Wettability Enhancement of SiCp in Cast A356/SiCp Composite Using Semisolid Process

    Article • Materials and Manufacturing Processes, February 2015, Taylor & Francis

    Dr Saeed Farahany

  34. Evaluation of the effect of grain refiners on the solidification characteristics of an Sr-modified ADC12 die-casting alloy by cooling curve thermal analysis

    Article • Journal of Thermal Analysis and Calorimetry, February 2015, Springer Science + Business Media

    Dr Saeed Farahany

  35. Investigating the Machinability of Al–Si–Cu cast alloy containing bismuth and antimony using coated carbide insert

    Article • Measurement, February 2015, Elsevier

    Professor Ahmed A. D. Sarhan, Dr Saeed Farahany, Assoc. Prof. Ibrahem Maher

  36. Fuzzy logic based model for predicting surface roughness of machined Al–Si–Cu–Fe die casting alloy using different additives-turning

    Article • Measurement, February 2015, Elsevier

    Professor Ahmed A. D. Sarhan, Dr Saeed Farahany

  37. Effect of bismuth and strontium interaction on the microstructure development, mechanical properties and fractography of a secondary Al–Si–Cu–Fe–Zn alloy

    Article • Materials Science and Engineering A, January 2015, Elsevier

    Dr Saeed Farahany

  38. Effect of mechanical alloying on the phase evolution, microstructure and bio-corrosion properties of a Mg/HA/TiO2/MgO nanocomposite

    Article • Ceramics International, December 2014, Elsevier

    Dr Saeed Farahany

  39. The sequence of intermetallic formation and solidification pathway of an Al–13Mg–7Si–2Cu in-situ composite

    Article • Materials Characterization, December 2014, Elsevier

    Dr Saeed Farahany

  40. The Mechanical Properties and Corrosion Behavior of Quaternary Mg-6Zn-0.8Mn-xCa Alloys

    Article • Journal of Materials Engineering and Performance, November 2014, Springer Science + Business Media

    Dr Saeed Farahany

  41. Influence of Silver nanoparticles addition on the phase transformation, mechanical properties and corrosion behaviour of Cu–Al–Ni shape memory alloys

    Article • Journal of Alloys and Compounds, November 2014, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi, Dr Saeed Farahany

  42. Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach

    Article • The International Journal of Advanced Manufacturing Technology, October 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Dr Saeed Farahany

  43. Refinement of Mg2Si Particulate Reinforced Al-20%Mg2Si In Situ Composite with Addition of Antimony

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Dr Saeed Farahany

  44. Role of bismuth on solidification, microstructure and mechanical properties of a near eutectic Al-Si alloys

    Article • Metals and Materials International, September 2014, Springer Science + Business Media

    Dr Saeed Farahany

  45. Authors’ Reply to Discussion of ‘‘On the Refinement Mechanism of Silicon in Al-Si-Cu-Zn Alloy with Addition of Bismuth’’

    Article • Metallurgical and Materials Transactions A, August 2014, Springer Science + Business Media

    Dr Saeed Farahany

  46. Phase Evaluation of Pure Mg, Mg-1Ca and Mg-1Ca-3Zn ‎Alloys by Thermal Analysis Used in ‎Medical Applications

    Article • Applied Mechanics and Materials, August 2014, Trans Tech Publications

    Dr Saeed Farahany

  47. Evaluations of antimony and strontium interaction in an Al–Si–Cu–Zn die cast alloy

    Article • Thermochimica Acta, May 2014, Elsevier

    Dr Saeed Farahany

  48. Effect of bonding parameters on microstructure development during TGTLP bonding of Al7075 alloy

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, March 2014, Taylor & Francis

    Dr Saeed Farahany

  49. On the Refinement Mechanism of Silicon in Al-Si-Cu-Zn Alloy with Addition of Bismuth

    Article • Metallurgical and Materials Transactions A, January 2014, Springer Science + Business Media

    Dr Saeed Farahany

  50. A new approach to assess the effects of Sr and Bi interaction in ADC12 Al–Si die casting alloy

    Article • Thermochimica Acta, January 2014, Elsevier

    Dr Saeed Farahany

  51. Refinement of Mg2Si reinforcement in a commercial Al–20%Mg2Si in-situ composite with bismuth, antimony and strontium

    Article • Materials Characterization, December 2013, Elsevier

    Esah Hamzah, Dr Saeed Farahany

  52. Evaluation of the Effect of Bismuth on Mg2Si Particulate Reinforced in Al-20%Mg2Si In Situ Composite

    Article • Advanced Materials Research, December 2013, Trans Tech Publications

    Esah Hamzah, Dr Saeed Farahany

  53. Effects of Zn and Ca Additions on the Solidification Behavior and Microstructure Analysis of Mg and Mg–6Zn Alloys

    Article • Advanced Science Letters, December 2013, American Scientific Publishers

    Dr Saeed Farahany

  54. Effect of Elements Cerium and Lanthanum on Eutectic Solidification of Al-Si-Cu near Eutectic Cast Alloy

    Article • Advanced Materials Research, December 2013, Trans Tech Publications

    Dr Mohammed Bsher Asmael, Dr Saeed Farahany

  55. The Influence of Bismuth, Antimony, and Strontium on Microstructure, Thermal, and Machinability of Aluminum-Silicon Alloy

    Article • Materials and Manufacturing Processes, November 2013, Taylor & Francis

    Dr Saeed Farahany

  56. Thermal characteristics and corrosion behaviour of Mg–xZn alloys for biomedical applications

    Article • Bulletin of Materials Science, November 2013, Springer Science + Business Media

    Dr Saeed Farahany

  57. Structure-Property Relationship of Cu-Al-Ni-Fe Shape Memory Alloys in Different Quenching Media

    Article • Journal of Materials Engineering and Performance, October 2013, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi, Dr Saeed Farahany

  58. In situ melting and solidification assessment of AZ91D granules by computer-aided thermal analysis during investment casting process

    Article • Materials & Design (1980-2015), September 2013, Elsevier

    Dr Saeed Farahany

  59. Effect of Secondary Phase on the Corrosion Behavior of Mg–Ca and Mg–Zn Binary Alloys

    Article • Advanced Science Letters, September 2013, American Scientific Publishers

    Dr Saeed Farahany

  60. Improvement of thermally grown oxide layer in thermal barrier coating systems with nano alumina as third layer

    Article • Transactions of Nonferrous Metals Society of China, May 2013, Elsevier

    Dr Saeed Farahany

  61. Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al–Si–Cu alloy (ADC12) by in situ thermal analysis

    Article • Thermochimica Acta, May 2013, Elsevier

    Dr Saeed Farahany

  62. Combined effect of bismuth content and cooling rate on microstructure and mechanical properties of Al–8·5Si–0·4Mg–0·3Fe alloy

    Article • Canadian Metallurgical Quarterly, April 2013, Taylor & Francis

    Dr Saeed Farahany

  63. Effects of Cutting Condition on Surface Roughness when Turning Untreated and Sb-Treated Al-11%Si Alloys Using PVD Coated Tools

    Article • Applied Mechanics and Materials, April 2013, Trans Tech Publications

    Dr Saeed Farahany

  64. Computer-aided cooling curve thermal analysis of near eutectic Al–Si–Cu–Fe alloy

    Article • Journal of Thermal Analysis and Calorimetry, February 2013, Springer Science + Business Media

    Dr Saeed Farahany

  65. Effect of Cooling Rate and Silicon Refiner/Modifier on Solidification Pathways of Al-11Si-2Cu-0.4Fe Alloy

    Article • Materials and Manufacturing Processes, January 2013, Taylor & Francis

    Dr Saeed Farahany

  66. Effect of Machining Parameters on Cutting Force when Turning Untreated and Sb-Treated Al-11%Si-1.8%Cu Alloys Using PVD Coated Tools

    Article • Applied Mechanics and Materials, November 2012, Trans Tech Publications

    Dr Saeed Farahany

  67. Relationship between the corrosion behavior and the thermal characteristics and microstructure of Mg–0.5Ca–xZn alloys

    Article • Corrosion Science, November 2012, Elsevier

    Dr Saeed Farahany

  68. Characterization of AZ91D Granules Covered with a Flux during In‐Situ Melting

    Article • Particle & Particle Systems Characterization, September 2012, Wiley

    Dr Saeed Farahany

  69. In-Situ Melting Assessment of AZ91D Granules by Thermal Analysis

    Article • Advanced Science Letters, July 2012, American Scientific Publishers

    Dr Saeed Farahany

  70. Investigation on tungsten inert gas welding of in situ Al-15 and 20 Mg2Si composites with an Al-Si filler

    Article • Journal of Composite Materials, May 2012, SAGE Publications

    Dr Saeed Farahany

  71. Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys

    Article • Materials & Design (1980-2015), January 2012, Elsevier

    Dr Saeed Farahany

  72. In-situ thermal analysis and macroscopical characterization of Mg–xCa and Mg–0.5Ca–xZn alloy systems

    Article • Thermochimica Acta, January 2012, Elsevier

    Dr Saeed Farahany

  73. Effects of pouring temperature and slurry viscosity on heat transfer and surface roughness in lost foam casting

    Article • January 2012, American Institute of Physics

    Dr Saeed Farahany

  74. Characterization and Corrosion Behavior of Biodegradable Mg-Ca and Mg-Ca-Zn Implant Alloys

    Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

    Dr Saeed Farahany

  75. Oxidation and Melting Characterizations of AZ91D Granules during In Situ Melting

    Article • Advanced Materials Research, August 2011, Trans Tech Publications

    Dr Saeed Farahany

  76. Effect of bismuth on microstructure of unmodified and Sr-modified Al-7Si-0.4Mg alloys

    Article • Transactions of Nonferrous Metals Society of China, July 2011, Elsevier

    Dr Saeed Farahany

  77. The usage of computer-aided cooling curve thermal analysis to optimise eutectic refiner and modifier in Al–Si alloys

    Article • Journal of Thermal Analysis and Calorimetry, June 2011, Springer Science + Business Media

    Dr Saeed Farahany

  78. Influence of Heat Treatment on Properties of Hot Isostatically Pressed Turbine Blade Superalloy IN738

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Dr Saeed Farahany

  79. Creep Life Prediction of Thermally Exposed Rene 80 Superalloy

    Article • Journal of Materials Engineering and Performance, January 2010, Springer Science + Business Media

    Dr Saeed Farahany

  80. Creep Degradation of Thermally Exposed IN738C Superalloy

    Article • Journal of Engineering for Gas Turbines and Power, January 2009, ASME International

    Dr Saeed Farahany