All Stories

  1. Exploitation of albite at elevated temperatures to ensure smooth, efficient, and long-lasting lubrication to minimise friction and wear, enhance metal-formability, and extend tool life in metal-forming

    Article • Tribology - Materials Surfaces & Interfaces, November 2025, SAGE Publications

    Professor Ahmed A. D. Sarhan

  2. AI-Driven ANFIS Modeling for Smart Drilling to Maximize the Utilization of the Cutting Tools—I4.0 Application

    Article • Arabian Journal for Science and Engineering, July 2025, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  3. Actuated Rotational Adaptive Optics in Shaping the Next Generation of Optical Systems: An In-Depth Analysis

    Article • Arabian Journal for Science and Engineering, May 2025, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  4. Genetic Modeling for Enhancing Machining Performance of High-Volume Fraction 45% SiCp/Al Particle Reinforcement Metal Matrix Composite

    Article • Arabian Journal for Science and Engineering, July 2024, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  5. The Enhancement of Die Sink EDM Machining Efficiency Incorporating Micro-Flakes of Graphite Powder

    Article • Arabian Journal for Science and Engineering, May 2024, Springer Science + Business Media

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  6. Grindability Evaluation of Ultrasonic Assisted Grinding of Silicon Nitride Ceramic Using Minimum Quantity Lubrication Based SiO2 Nanofluid

    Article • Chinese Journal of Mechanical Engineering, March 2024, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  7. A State-of-the-Art Review on Cutting Tool Materials and Coatings in Enhancing the Tool Performance in Machining the Superior Nickel-Based Superalloys

    Article • Arabian Journal for Science and Engineering, February 2024, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  8. Evolution of Iron-Based Metallic Glass Composite Coating with Enhanced Corrosion Resistance and Biocompatibility

    Article • Arabian Journal for Science and Engineering, November 2023, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  9. In-vitro viability of laser cladded Fe-based metallic glass as a promising bioactive material for improved osseointegration of orthopedic implants

    Article • Medical Engineering & Physics, April 2022, Elsevier

    Professor Ahmed A. D. Sarhan

  10. Development of a New Cost Performance Index (CPI) for Selecting the Most Suitable Wire Electrode in Wire-EDM Machining

    Article • Arabian Journal for Science and Engineering, July 2021, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  11. A Comprehensive Review on Machining of Titanium Alloys

    Article • Arabian Journal for Science and Engineering, March 2021, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  12. Investigation of the surface integrity, flexural strength on the grinding of alumina for biomedical applications

    Article • Precision Engineering, January 2021, Elsevier

    Professor Ahmed A. D. Sarhan

  13. Developing a new laser cladded FeCrMoCB metallic glass layer on nickel-free stainless-steel as a potential superior wear-resistant coating for joint replacement implants

    Article • Surface and Coatings Technology, June 2020, Elsevier

    Professor Ahmed A. D. Sarhan

  14. Improvement of surface integrity in the grinding of bioceramic partially stabilized zirconia using analytical, numerical, and experimental methods

    Article • Ceramics International, June 2020, Elsevier

    Professor Ahmed A. D. Sarhan

  15. Dissimilar vacuum brazing of WC-Co and cold work steel utilizing a new near-eutectic silver-copper filler alloy

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, December 2019, SAGE Publications

    Professor Ahmed A. D. Sarhan

  16. Surface integrity and flexural strength improvement in grinding partially stabilized zirconia

    Article • Journal of Central South University, December 2019, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  17. Influence of grinding parameters on phase transformation, surface roughness, and grinding cost of bioceramic partially stabilized zirconia (PSZ) using diamond grinding wheel

    Article • The International Journal of Advanced Manufacturing Technology, November 2019, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  18. Characterization and hardness enhancement of amorphous Fe-based metallic glass laser cladded on nickel-free stainless steel for biomedical implant application

    Article • Materials Chemistry and Physics, September 2019, Elsevier

    Professor Ahmed A. D. Sarhan

  19. Hard Anodizing of Aerospace AA7075-T6 Aluminum Alloy for Improving Surface Properties

    Article • Transactions of the Indian Institute of Metals, July 2019, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  20. Electromechanical Modeling and High Speed Design of a Tubular Ultrasonic Motor

    Article • June 2019, International Institute of Acoustics and Vibration (IIAV)

    Professor Ahmed A. D. Sarhan

  21. Measure and evaluate the hardness of the electrodeposited Nickel-Phosphorous (Ni-P) thin film coating on carbon steel alloy for automotive applications

    Article • Measurement, June 2019, Elsevier

    Professor Ahmed A. D. Sarhan

  22. Tribological performance of SiO2-based nanofluids in minimum quantity lubrication grinding of Si3N4 ceramic

    Article • Journal of Manufacturing Processes, May 2019, Elsevier

    Professor Ahmed A. D. Sarhan

  23. Fuzzy logic method to investigate grinding of alumina ceramic using minimum quantity lubrication

    Article • International Journal of Applied Ceramic Technology, April 2019, Wiley

    Professor Ahmed A. D. Sarhan

  24. Advancement of the artificial amorphous-crystalline structure of laser cladded FeCrMoCB on nickel-free stainless-steel for bone-implants

    Article • Materials Chemistry and Physics, April 2019, Elsevier

    Professor Ahmed A. D. Sarhan

  25. Prediction of specific grinding forces and surface roughness in machining of AL6061-T6 alloy using ANFIS technique

    Article • Industrial Lubrication and Tribology, March 2019, Emerald

    Professor Ahmed A. D. Sarhan

  26. CFD modelling of weld pool formation and solidification in a laser micro-welding process

    Article • International Communications in Heat and Mass Transfer, February 2019, Elsevier

    Professor Ahmed A. D. Sarhan

  27. Volumetric shrinkage prediction in fused deposition modelling process - ANFIS modelling approach

    Article • International Journal of Materials and Product Technology, January 2019, Inderscience Publishers

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  28. Microstructure characterization and maximization of the material removal rate in nano-powder mixed EDM of Al-Mg2Si metal matrix composite—ANFIS and RSM approaches

    Article • The International Journal of Advanced Manufacturing Technology, December 2018, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  29. Analysis of tool deflection errors in precision CNC end milling of aerospace Aluminum 6061-T6 alloy

    Article • Measurement, September 2018, Elsevier

    Professor Ahmed A. D. Sarhan

  30. Comparative study on the corrosion and wear behavior of plasma-sprayed vs. high velocity oxygen fuel-sprayed Al8Si20BN ceramic coatings

    Article • Ceramics International, August 2018, Elsevier

    Professor Ahmed A. D. Sarhan, Dr. Pooria Moozarm Nia

  31. A new approach to evaluate the impact of thermophysical properties of nanofluids on heat transfer and pressure drop

    Article • International Communications in Heat and Mass Transfer, July 2018, Elsevier

    Professor Ahmed A. D. Sarhan

  32. Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics

    Article • Ceramics International, July 2018, Elsevier

    Professor Ahmed A. D. Sarhan

  33. Investigate the effects of the substrate surface roughness on the geometry, phase transformation, and hardness of laser-cladded Fe-based metallic glass coating

    Article • The International Journal of Advanced Manufacturing Technology, June 2018, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  34. Characterization of biogenic hydroxyapatite derived from animal bones for biomedical applications

    Article • Ceramics International, June 2018, Elsevier

    Professor Ahmed A. D. Sarhan

  35. Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia

    Article • Ceramics International, June 2018, Elsevier

    Professor Ahmed A. D. Sarhan

  36. Analysis of corrosion protection behavior of Al 2 O 3 -TiO 2 oxide ceramic coating on carbon steel pipes for petroleum industry

    Article • Ceramics International, April 2018, Elsevier

    Professor Ahmed A. D. Sarhan

  37. Numerical simulation of metal removal in laser drilling using meshless local Petrov–Galerkin collocation method

    Article • Applied Mathematical Modelling, April 2018, Elsevier

    Professor Ahmed A. D. Sarhan

  38. Investigating the Tribological Characteristics of Burnished Polyoxymethylene—ANFIS and FE Modeling

    Article • Tribology Transactions, March 2018, Taylor & Francis

    Professor Ahmed A. D. Sarhan

  39. Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic

    Article • The International Journal of Advanced Manufacturing Technology, March 2018, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  40. Experimental–numerical study on minimizing impact induced damage in laminated composites under low-velocity impact

    Article • Journal of Reinforced Plastics and Composites, November 2017, SAGE Publications

    Farzad Pashmforoush, Professor Ahmed A. D. Sarhan

  41. Design and manufacturing of ultrasonic motor with in-plane and out-of-plane bending vibration modes of rectangular plate with large contact area

    Article • Measurement, October 2017, Elsevier

    Professor Ahmed A. D. Sarhan

  42. Characterizing the Effects of Micro Electrical Discharge Machining Parameters on Material Removal Rate during Micro EDM Drilling of Tungsten Carbide (WC-Co)

    Article • IOP Conference Series Materials Science and Engineering, October 2017, Institute of Physics Publishing

    Professor Ahmed A. D. Sarhan

  43. Improving teleoperation system performance in the presence of estimated external force

    Article • Robotics and Computer-Integrated Manufacturing, August 2017, Elsevier

    Professor Ahmed A. D. Sarhan

  44. ANFIS modeling to predict the friction forces in CNC guideways and servomotor currents in the feed drive system to be employed in lubrication control system

    Article • Journal of Manufacturing Processes, August 2017, Elsevier

    Professor Ahmed A. D. Sarhan

  45. Numerical simulation of metal removal in laser drilling using symmetric smoothed particle hydrodynamics

    Article • Precision Engineering, July 2017, Elsevier

    Professor Ahmed A. D. Sarhan

  46. Performance of Electrical Discharge Milling and Sinking in Micro Graphite Powder Mixed Dielectric

    Article • Materials Science Forum, July 2017, Trans Tech Publications

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  47. Effect of two-step sintering on the hydrothermal ageing resistance of tetragonal zirconia polycrystals

    Article • Ceramics International, July 2017, Elsevier

    Professor Ahmed A. D. Sarhan

  48. Development and evaluation of the machining performance of a CNC gantry double motion machine tool in different modes

    Article • The International Journal of Advanced Manufacturing Technology, June 2017, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  49. Ultrasonic assisted grinding of advanced materials for biomedical and aerospace applications—a review

    Article • The International Journal of Advanced Manufacturing Technology, May 2017, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  50. Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants – A review article

    Article • Journal of Alloys and Compounds, April 2017, Elsevier

    Professor Ahmed A. D. Sarhan

  51. Design and experimental evaluation of a precise and compact tubular ultrasonic motor driven by a single-phase source

    Article • Precision Engineering, April 2017, Elsevier

    Professor Ahmed A. D. Sarhan

  52. Numerical simulation of metal removal in laser drilling using radial point interpolation method

    Article • Engineering Analysis with Boundary Elements, April 2017, Elsevier

    Professor Ahmed A. D. Sarhan

  53. Comparative study between wear of uncoated and TiAlN-coated carbide tools in milling of Ti6Al4V

    Article • Advances in Manufacturing, February 2017, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  54. Development of new fabrication and measurement techniques of micro-electrodes with high aspect ratio for micro EDM using typical EDM machine

    Article • Measurement, February 2017, Elsevier

    Professor Ahmed A. D. Sarhan

  55. Wire Rupture Optimization in Wire Electrical Discharge Machining using Taguchi Approach

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  56. 1.9 Effect of Electrical Discharge Energy on White Layer Thickness of WEDM Process

    Article • January 2017, Elsevier

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  57. 1.7 Techniques to Improve EDM Capabilities: A Review

    Article • January 2017, Elsevier

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  58. 1.10 Micro-EDM Drilling of Tungsten Carbide Using Microelectrode with High Aspect Ratio to Improve MRR, EWR, and Hole Quality

    Article • January 2017, Elsevier

    Professor Ahmed A. D. Sarhan

  59. Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review

    Article • The International Journal of Advanced Manufacturing Technology, November 2016, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  60. Proposing a new performance index to identify the effect of spark energy and pulse frequency simultaneously to achieve high machining performance in WEDM

    Article • The International Journal of Advanced Manufacturing Technology, November 2016, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  61. Employing severe plastic deformation to the processing of electrical discharge machining electrodes

    Article • Precision Engineering, October 2016, Elsevier

    Professor Ahmed A. D. Sarhan

  62. State of the art in powder mixed dielectric for EDM applications

    Article • Precision Engineering, October 2016, Elsevier

    Professor Ahmed A. D. Sarhan

  63. Sensor-less force-reflecting macro–micro telemanipulation systems by piezoelectric actuators

    Article • ISA Transactions, September 2016, Elsevier

    Professor Ahmed A. D. Sarhan

  64. Ceramic tantalum oxide thin film coating to enhance the corrosion and wear characteristics of Ti6Al4V alloy

    Article • Journal of Alloys and Compounds, August 2016, Elsevier

    Professor Ahmed A. D. Sarhan

  65. A novel rate-dependent hysteresis modeling and position control technique for piezo-actuated bimorph beams

    Article • Journal of Intelligent Material Systems and Structures, July 2016, SAGE Publications

    Professor Ahmed A. D. Sarhan

  66. White layer thickness prediction in wire-EDM using CuZn-coated wire electrode – ANFIS modelling

    Article • Transactions of the IMF, July 2016, Taylor & Francis

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  67. An investigation of heat transfer and fluid flow on laser micro-welding upon the thin stainless steel sheet (SUS304) using computational fluid dynamics (CFD)

    Article • International Communications in Heat and Mass Transfer, July 2016, Elsevier

    Professor Ahmed A. D. Sarhan

  68. Wettability, structural and optical properties investigation of TiO2 nanotubular arrays

    Article • Materials Research Bulletin, June 2016, Elsevier

    Professor Ahmed A. D. Sarhan

  69. Cutting force analysis to estimate the friction force in linear guideways of CNC machine

    Article • Measurement, May 2016, Elsevier

    Professor Ahmed A. D. Sarhan

  70. Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel

    Article • Measurement, May 2016, Elsevier

    Professor Ahmed A. D. Sarhan

  71. Development and protection evaluation of two new, advanced ceramic composite thermal spray coatings, Al2O3–40TiO2 and Cr3C2–20NiCr on carbon steel petroleum oil piping

    Article • Ceramics International, March 2016, Elsevier

    Professor Ahmed A. D. Sarhan

  72. Electrochemical corrosion behavior of carbon steel pipes coated with a protective ceramic layer using plasma and HVOF thermal spray techniques for oil and gas

    Article • Ceramics International, February 2016, Elsevier

    Professor Ahmed A. D. Sarhan

  73. Development of tantalum oxide (Ta-O) thin film coating on biomedical Ti-6Al-4V alloy to enhance mechanical properties and biocompatibility

    Article • Ceramics International, January 2016, Elsevier

    Professor Ahmed A. D. Sarhan

  74. Thermally induced crystallization of mechanically alloyed Na0.5Bi0.5TiO3 and K0.5Bi0.5TiO3 piezoelectric ceramic nanopowders

    Article • Ceramics International, December 2015, Elsevier

    Professor Ahmed A. D. Sarhan

  75. Enhancing the adhesion strength of tantalum oxide ceramic thin film coating on biomedical Ti–6Al–4V alloy by thermal surface treatment

    Article • Ceramics International, December 2015, Elsevier

    Professor Ahmed A. D. Sarhan

  76. Employment of fiber laser technology to weld austenitic stainless steel 304l with aluminum alloy 5083 using pre-placed activating flux

    Article • Materials & Design, December 2015, Elsevier

    Professor Ahmed A. D. Sarhan

  77. Employing Ti nano-powder dielectric to enhance surface characteristics in electrical discharge machining of AISI D2 steel

    Article • Applied Surface Science, December 2015, Elsevier

    Professor Ahmed A. D. Sarhan

  78. Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production

    Article • Journal of Cleaner Production, December 2015, Elsevier

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  79. Novel uses of SiO2 nanolubrication in end milling of medium carbon steel for higher compressive residual stress measured by high-energy X-ray diffraction data

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, October 2015, SAGE Publications

    Professor Ahmed A. D. Sarhan

  80. Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application

    Article • Journal of Thermal Analysis and Calorimetry, September 2015, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  81. Novel gantry machine with double motion mechanism

    Article • Concurrent Engineering, August 2015, SAGE Publications

    Professor Ahmed A. D. Sarhan

  82. Investigation about the characterization of machine tool spindle stiffness for intelligent CNC end milling

    Article • Robotics and Computer-Integrated Manufacturing, August 2015, Elsevier

    Professor Ahmed A. D. Sarhan

  83. Investigation into Effect of Cutting Conditions on Surface Roughness while Dry Machining Al-11%Si and Al-11%Si-1% Bi Die Casting Alloy

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Dr mohsen marani barzani, Professor Ahmed A. D. Sarhan

  84. An optimization technique on ultrasonic and cutting parameters for drilling and deep drilling of nickel-based high-strength Inconel 738LC superalloy with deeper and higher hole quality

    Article • The International Journal of Advanced Manufacturing Technology, June 2015, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  85. The tribological and electrochemical behavior of HVOF-sprayed Cr3C2–NiCr ceramic coating on carbon steel

    Article • Ceramics International, May 2015, Elsevier

    Professor Ahmed A. D. Sarhan

  86. Nonlinear Dynamic Analysis of a New Antibacklash Gear Mechanism Design for Reducing Dynamic Transmission Error

    Article • Journal of Mechanical Design, March 2015, ASME International

    Professor Ahmed A. D. Sarhan

  87. Deposition of a Silicon Carbide Reinforced Metal Matrix Composite (P25) Layer Using CO2Laser

    Article • Journal of Manufacturing Science and Engineering, March 2015, ASME International

    Professor Ahmed A. D. Sarhan

  88. Measuring of positioning, circularity and static errors of a CNC Vertical Machining Centre for validating the machining accuracy

    Article • Measurement, February 2015, Elsevier

    Professor Ahmed A. D. Sarhan

  89. Investigating the Machinability of Al–Si–Cu cast alloy containing bismuth and antimony using coated carbide insert

    Article • Measurement, February 2015, Elsevier

    Professor Ahmed A. D. Sarhan, Dr Saeed Farahany, Assoc. Prof. Ibrahem Maher

  90. Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061

    Article • Journal of Cleaner Production, February 2015, Elsevier

    Professor Ahmed A. D. Sarhan

  91. Fuzzy logic based model for predicting surface roughness of machined Al–Si–Cu–Fe die casting alloy using different additives-turning

    Article • Measurement, February 2015, Elsevier

    Professor Ahmed A. D. Sarhan, Dr Saeed Farahany

  92. Transparency Improvement by External Force Estimation in a Time-Delayed Nonlinear Bilateral Teleoperation System

    Article • Journal of Dynamic Systems Measurement and Control, January 2015, ASME International

    Professor Ahmed A. D. Sarhan

  93. Investigating the Surface Tribology of Roller-Burnished Polymer Using the Fuzzy Rule–Based Approach

    Article • Tribology Transactions, January 2015, Taylor & Francis

    Professor Ahmed A. D. Sarhan

  94. ANFIS Modeling for Higher Machining Performance of Aluminium Tempered Grade 6061 Using Novel SIO2 Nanolubrication

    Article • January 2015, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  95. Improve wire EDM performance at different machining parameters - ANFIS modeling

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  96. Adaptive neuro-fuzzy approach to predict tool wear accurately in turning operations for maximum cutting tool utilization

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Professor Ahmed A. D. Sarhan

  97. Indoor Solar Thermal Energy Saving Time with Phase Change Material in a Horizontal Shell and Finned-Tube Heat Exchanger

    Article • The Scientific World JOURNAL, January 2015, Hindawi Publishing Corporation

    Professor Ahmed A. D. Sarhan

  98. Optimizing cutting parameters in inclined end milling for minimum surface residual stress – Taguchi approach

    Article • Measurement, January 2015, Elsevier

    Professor Ahmed A. D. Sarhan

  99. Enhancing the tribo-mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings

    Article • Ceramics International, December 2014, Elsevier

    Professor Ahmed A. D. Sarhan

  100. Statistical optimization and fretting fatigue study of Zr/ZrO2 nanotubular array coating on Ti–6Al–4V

    Article • Surface and Coatings Technology, November 2014, Elsevier

    Professor Ahmed A. D. Sarhan

  101. Plasma thermal spray of ceramic oxide coating on carbon steel with enhanced wear and corrosion resistance for oil and gas applications

    Article • Ceramics International, November 2014, Elsevier

    Professor Ahmed A. D. Sarhan

  102. Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach

    Article • The International Journal of Advanced Manufacturing Technology, October 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Dr Saeed Farahany

  103. Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining

    Article • The International Journal of Advanced Manufacturing Technology, September 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher, Mohamed Eltaib Elmobark

  104. Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining

    Article • The International Journal of Advanced Manufacturing Technology, August 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  105. Robust control-based linear bilateral teleoperation system without force sensor

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, July 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  106. Modified robust external force control with disturbance rejection with application to piezoelectric actuators

    Article • Transactions of the Institute of Measurement and Control, June 2014, SAGE Publications

    Professor Ahmed A. D. Sarhan

  107. Investigation of the effect of machining parameters on the surface quality of machined brass (60/40) in CNC end milling—ANFIS modeling

    Article • The International Journal of Advanced Manufacturing Technology, June 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher, Mohamed Eltaib Elmobark

  108. Continuous dynamic modelling of bimorph piezoelectric cantilevered actuators considering hysteresis effect and dynamic behaviour analysis

    Article • Mathematical and Computer Modelling of Dynamical Systems, April 2014, Taylor & Francis

    Professor Ahmed A. D. Sarhan

  109. Effects of Laser Cladding of Silicon Carbides Particles and Iron Based Powder

    Article • Applied Mechanics and Materials, April 2014, Trans Tech Publications

    Professor Ahmed A. D. Sarhan

  110. Multilayer thin film CrN coating on aerospace AL7075-T6 alloy for surface integrity enhancement

    Article • The International Journal of Advanced Manufacturing Technology, March 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  111. Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption

    Article • Journal of Cleaner Production, March 2014, Elsevier

    Professor Ahmed A. D. Sarhan

  112. Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining

    Article • Journal of Cleaner Production, March 2014, Elsevier

    Professor Ahmed A. D. Sarhan

  113. Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system

    Article • Journal of Cleaner Production, March 2014, Elsevier

    Professor Ahmed A. D. Sarhan

  114. Investigating the Minimum Quantity Lubrication in grinding of Al2O3 engineering ceramic

    Article • Journal of Cleaner Production, March 2014, Elsevier

    Professor Ahmed A. D. Sarhan

  115. A fuzzy logic predictive model for better surface roughness of Ti–TiN coating on AL7075-T6 alloy for longer fretting fatigue life

    Article • Measurement, March 2014, Elsevier

    Professor Ahmed A. D. Sarhan

  116. Development of SiO2 nanolubrication system to be used in sliding bearings

    Article • The International Journal of Advanced Manufacturing Technology, January 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  117. Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill

    Article • Advances in Materials Science and Engineering, January 2014, Hindawi Publishing Corporation

    Professor Ahmed A. D. Sarhan

  118. Disturbance rejection-based robust control for micropositioning of piezoelectric actuators

    Article • Comptes Rendus Mécanique, January 2014, Elsevier

    Professor Ahmed A. D. Sarhan

  119. A Study on Surface Modification of Al7075-T6 Alloy against Fretting Fatigue Phenomenon

    Article • Advances in Materials Science and Engineering, January 2014, Hindawi Publishing Corporation

    Professor Ahmed A. D. Sarhan

  120. Fuzzy Logic Modeling for Higher Adhesion Strength of Cr/Cr-N Multilayer Thin Film Coating on Aerospace AL7075-T6 Alloy for Higher Fretting Fatigue Life

    Article • January 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  121. Investigating the surface quality of the burnished brass C3605—fuzzy rule-based approach

    Article • The International Journal of Advanced Manufacturing Technology, December 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  122. Grinding Wheel Loading Evaluation Using Digital Image Processing

    Article • Journal of Manufacturing Science and Engineering, December 2013, ASME International

    Professor Ahmed A. D. Sarhan

  123. Investigation on using high-pressure fluid jet in grinding process for less wheel loaded areas

    Article • The International Journal of Advanced Manufacturing Technology, November 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  124. A new fretting fatigue testing machine design, utilizing rotating–bending principle approach

    Article • The International Journal of Advanced Manufacturing Technology, November 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  125. Mechanical Property Enhancement of Ti-6Al-4V by Multilayer Thin Solid Film Ti/TiO2 Nanotubular Array Coating for Biomedical Application

    Article • Metallurgical and Materials Transactions A, October 2013, Springer Science + Business Media

    Saeid Baradaran, Professor Ahmed A. D. Sarhan

  126. Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy

    Article • The International Journal of Advanced Manufacturing Technology, October 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  127. Morphology investigation of worn bearing surfaces using SiO2 nanolubrication system

    Article • The International Journal of Advanced Manufacturing Technology, October 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  128. Designing and manufacturing an automated lubrication control system in CNC machine tool guideways for more precise machining and less oil consumption

    Article • The International Journal of Advanced Manufacturing Technology, October 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  129. Investigate the spindle errors motions from thermal change for high-precision CNC machining capability

    Article • The International Journal of Advanced Manufacturing Technology, October 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  130. Investigating the effects of liquid atomization and delivery parameters of minimum quantity lubrication on the grinding process of Al2O3 engineering ceramics

    Article • Journal of Manufacturing Processes, August 2013, Elsevier

    Professor Ahmed A. D. Sarhan

  131. Electrical and optical properties of indium-tin oxide (ITO) films by ion-assisted deposition (IAD) at room temperature

    Article • International Journal of Precision Engineering and Manufacturing, August 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  132. Development of SiO2 Nanolubrication System for Better Surface Quality, more Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140

    Article • Advanced Materials Research, August 2013, Trans Tech Publications

    Professor Ahmed A. D. Sarhan

  133. Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling

    Article • Advanced Materials Research, August 2013, Trans Tech Publications

    Professor Ahmed A. D. Sarhan

  134. Fretting fatigue life evaluation of multilayer Cr–CrN-coated Al7075-T6 with higher adhesion strength—fuzzy logic approach

    Article • The International Journal of Advanced Manufacturing Technology, June 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  135. Fabrication and deformation behaviour of multilayer Al2O3/Ti/TiO2 nanotube arrays

    Article • Journal of the Mechanical Behavior of Biomedical Materials, April 2013, Elsevier

    Saeid Baradaran, Professor Ahmed A. D. Sarhan

  136. Surface hardness prediction of CrN thin film coating on AL7075-T6 alloy using fuzzy logic system

    Article • International Journal of Precision Engineering and Manufacturing, March 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  137. Investigating the effects of hard anodizing parameters on surface hardness of hard anodized aerospace AL7075-T6 alloy using fuzzy logic approach for fretting fatigue application

    Article • The International Journal of Advanced Manufacturing Technology, January 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  138. Analytical modeling of grinding wheel loading phenomena

    Article • The International Journal of Advanced Manufacturing Technology, January 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  139. A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy

    Article • The International Journal of Advanced Manufacturing Technology, January 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  140. The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace AL7075-T6 alloy

    Article • Materials Science and Engineering A, January 2013, Elsevier

    Professor Ahmed A. D. Sarhan

  141. Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy

    Article • Materials Science and Engineering A, January 2013, Elsevier

    Professor Ahmed A. D. Sarhan

  142. Surface Quality Improvement in CNC End Milling of Aluminum Alloy Using Nanolubrication System

    Article • January 2013, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  143. Optimizing the cutting parameters for better surface quality in 2.5D cutting utilizing titanium coated carbide ball end mill

    Article • International Journal of Precision Engineering and Manufacturing, November 2012, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  144. An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy

    Article • The International Journal of Advanced Manufacturing Technology, October 2012, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  145. Prediction of TiN coating adhesion strength on aerospace AL7075-T6 alloy using fuzzy rule based system

    Article • International Journal of Precision Engineering and Manufacturing, July 2012, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  146. Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system

    Article • The International Journal of Advanced Manufacturing Technology, June 2012, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  147. High-Precision Machining by Measuring and Compensating the Error Motion of Spindle’s Axis of Rotation in Radial Direction

    Article • May 2012, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  148. Optimizing the PVD TiN thin film coating’s parameters on aerospace AL7075-T6 alloy for higher coating hardness and adhesion with better tribological properties of the coating surface

    Article • The International Journal of Advanced Manufacturing Technology, March 2012, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  149. Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system

    Article • The International Journal of Advanced Manufacturing Technology, February 2012, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  150. Compensation Method of the Machine Tool Spindle Thermal Displacement for Accurate Monitoring of Cutting Forces

    Article • Materials and Manufacturing Processes, December 2011, Taylor & Francis

    Professor Ahmed A. D. Sarhan

  151. Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool—Taguchi approach

    Article • The International Journal of Advanced Manufacturing Technology, October 2011, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  152. Experimental Study on Minimizing Edge Chipping in Glass Milling Operation Using an Internal CBN Grinding Tool

    Article • Materials and Manufacturing Processes, August 2011, Taylor & Francis

    Professor Ahmed A. D. Sarhan

  153. An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish

    Article • The International Journal of Advanced Manufacturing Technology, June 2011, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  154. Optimizing the Machining Parameters in Glass Grinding Operation on the CNC Milling Machine for Best Surface Roughness

    Article • Advanced Materials Research, October 2010, Trans Tech Publications

    Professor Ahmed A. D. Sarhan

  155. Trends in Stem Cell Biology and Technology

    Article • January 2009, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan

  156. Monitoring Method of Cutting Force by Using Additional Spindle Sensors

    Article • JSME International Journal Series C, January 2006, Japan Society of Mechanical Engineers

    Professor Ahmed A. D. Sarhan

  157. Interrelationships between cutting force variation and tool wear in end-milling

    Article • Journal of Materials Processing Technology, February 2001, Elsevier

    Professor Ahmed A. D. Sarhan