Contact

All Stories

  1. Evaluating offshore wind energy potential in the gulf of Aqaba, Jordan: a preliminary screening and indicative economic assessment

    Article • JORDANIAN JOURNAL OF ENGINEERING AND CHEMICAL INDUSTRIES (JJECI), August 2026, Al-Balqa Applied University

    Dr Ahmad O. Mostafa

  2. Tribology of as-received Armox 500T steel under variable dry sliding conditions

    Article • Tribology - Materials Surfaces & Interfaces, May 2026, SAGE Publications

    Dr Ahmad O. Mostafa

  3. Tribo-Mechanical Characteristics of Modified Cu-Cr-Zr Resistance Spot Welding Electrode with Nickel

    Article • Crystals, June 2025, MDPI AG

    Dr Ahmad O. Mostafa

  4. Navigating Joining Challenges in Friction Stir Welding of Hybrid Composite Structures

    Article • June 2024, IGI Global

    Dr Ahmad O. Mostafa

  5. Finite element analysis and experimental validation of polymer–metal contacts in block-on-ring configuration

    Article • Friction, December 2023, Tsinghua University Press

    Dr Ahmad O. Mostafa

  6. Importance and Barriers of Establishing Educational/Training Programs in Electric Vehicles/Hybrid-Electric Vehicles in Jordan

    Article • World Electric Vehicle Journal, August 2023, MDPI AG

    Dr Ahmad O. Mostafa, Dr. Ma'moun A. A. Al-Smadi

  7. Tribological and mechanical performances of newly developed eco-epoxy composites incorporating flax fibres and graphene nanoplatelets

    Article • Journal of Reinforced Plastics and Composites, November 2022, SAGE Publications

    Dr Ahmad O. Mostafa

  8. Microstructural, Mechanical and Wear Properties of Al–1.3%Si Alloy as Compared to Hypo/Hyper–Eutectic Compositions in Al–Si Alloy System

    Article • Crystals, May 2022, MDPI AG

    Dr Ahmad O. Mostafa

  9. Modeling and Optimization of a Compression Ignition Engine Fueled with Biodiesel Blends for Performance Improvement

    Article • Mathematics, January 2022, MDPI AG

    Dr Ahmad O. Mostafa

  10. Friction welding of pure titanium-AZ31 magnesium alloy: Characterization and simulation

    Article • Engineering Failure Analysis, October 2021, Elsevier

    Dr Ahmad O. Mostafa

  11. Magnetic Refrigeration Design Technologies: State of the Art and General Perspectives

    Article • Energies, July 2021, MDPI AG

    Dr Ahmad O. Mostafa

  12. Mechanical Properties of Commercial Purity Aluminum Modified by Zirconium Micro-Additives

    Article • Crystals, March 2021, MDPI AG

    Dr Ahmad O. Mostafa

  13. Effect of heat treatment on the grain size, microhardness and corrosion behavior of the cold-working tool steels AISI D2 and AISI O1

    Article • Materiali in tehnologije, December 2020, Institute of Metals and Technology

    Dr Ahmad O. Mostafa

  14. Microstructure, phase evolution and corrosion behaviour of the Zn–Al–Mg–Sb alloy coating on steel

    Article • Materials Science and Technology, December 2019, Taylor & Francis

    Dr Ahmad O. Mostafa, Dr Saeed Farahany

  15. Nanocrystalline NiWO4-WO3-WO2.9 Composite Strings: Fabrication, Characterization and their Electrocatalytic Performance for Hydrogen Evolution Reaction

    Article • Metallurgical and Materials Transactions A, December 2019, Springer Science + Business Media

    Dr Ahmad O. Mostafa

  16. Mechanical Properties and Wear Behavior of Aluminum Grain Refined by Ti and Ti+B

    Article • International Journal of Surface Engineering and Interdisciplinary Materials Science, January 2019, IGI Global

    Dr Ahmad O. Mostafa

  17. Microstructural and Microhardness Evolution from Homogenization and Hot Isostatic Pressing on Selective Laser Melted Inconel 718: Structure, Texture, and Phases

    Article • Journal of Manufacturing and Materials Processing, May 2018, MDPI AG

    Dr Ahmad O. Mostafa

  18. Conversion of Electric Arc Furnace Dust into Ceramics Using Thermodynamic Calculations and Experimental Work

    Article • Key Engineering Materials, March 2018, Trans Tech Publications

    Professor Mamoun Medraj, Dr Ahmad O. Mostafa

  19. Hot compression behavior and microstructure of selectively laser-melted IN718 alloy

    Article • The International Journal of Advanced Manufacturing Technology, January 2018, Springer Science + Business Media

    Dr Ahmad O. Mostafa

  20. Erratum: Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments. Metals 2017, 7, 196

    Article • Metals, August 2017, MDPI AG

    Dr Ahmad O. Mostafa

  21. Effect of hafnium addition on wear resistance of zinc-aluminum 5 alloy: A three-dimensional presentation

    Article • Advanced Materials Letters, June 2017, VBRI Press

    Dr Ahmad O. Mostafa

  22. Binary Phase Diagrams and Thermodynamic Properties of Silicon and Essential Doping Elements (Al, As, B, Bi, Ga, In, N, P, Sb and Tl)

    Article • Materials, June 2017, MDPI AG

    Dr Ahmad O. Mostafa

  23. Wetting and spreading behavior of Ti-based brazing filler on Ti64 substrate

    Article • Materials Research Express, June 2017, Institute of Physics Publishing

    Dr Ahmad O. Mostafa

  24. Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments

    Article • Metals, May 2017, MDPI AG

    Dr Ahmad O. Mostafa

  25. Electrospun nickel–tungsten oxide composite fibers as active electrocatalysts for hydrogen evolution reaction

    Article • Journal of Materials Science, March 2017, Springer Science + Business Media

    Dr Ahmad O. Mostafa

  26. Characterisation and thermodynamic calculations of biodegradable Mg–2.2Zn–3.7Ce and Mg–Ca–2.2Zn–3.7Ce alloys

    Article • Materials Science and Technology, March 2017, Taylor & Francis

    Dr Ahmad O. Mostafa

  27. Thermal Characteristics, Mechanical Properties, In Vitro Degradation and Cytotoxicity of Novel Biodegradable Zn–Al–Mg and Zn–Al–Mg–xBi Alloys

    Article • Acta Metallurgica Sinica (English Letters), February 2017, Springer Science + Business Media

    Dr Ahmad O. Mostafa, Dr Saeed Farahany

  28. Water Impingement Erosion of Deep-Rolled Ti64

    Article • Metals, August 2015, MDPI AG

    Dr Ahmad O. Mostafa

  29. Experimental Investigation of the Mg-Nd-Zn Isothermal Section at 300 °C

    Article • Metals, January 2015, MDPI AG

    Dr Ahmad O. Mostafa

  30. Experimental investigation of the Mg–Mn–Nd isothermal section at 450°C

    Article • Journal of Alloys and Compounds, September 2014, Elsevier

    Professor Mamoun Medraj, Dr Ahmad O. Mostafa

  31. Experimental Investigation of the Phase Equilibria in the Al-Mn-Zn System at 400°C

    Article • Journal of Materials, July 2014, Wiley

    Professor Mamoun Medraj, Dr Ahmad O. Mostafa

  32. On the atomic interdiffusion in Mg–{Ce, Nd, Zn} and Zn–{Ce, Nd} binary systems

    Article • Journal of Materials Research, July 2014, Springer Science + Business Media

    Professor Mamoun Medraj, Dr Ahmad O. Mostafa

  33. Phase Equilibria of the Ce-Mg-Zn Ternary System at 300 °C

    Article • Metals, May 2014, MDPI AG

    Professor Mamoun Medraj, Dr Ahmad O. Mostafa

  34. Essential Magnesium Alloys Binary Phase Diagrams and Their Thermochemical Data

    Article • Journal of Materials, April 2014, Wiley

    Professor Mamoun Medraj, Dr Ahmad O. Mostafa

  35. Experimental Investigation of the Ce-Mg-Mn Isothermal Section at 723 K (450 °C) via Diffusion Couples Technique

    Article • Metallurgical and Materials Transactions A, March 2014, Springer Science + Business Media

    Professor Mamoun Medraj, Dr Ahmad O. Mostafa

  36. Influence of Cooling Rate on Microsegregation Behavior of Magnesium Alloys

    Article • Journal of Materials, March 2014, Hindawi Publishing Corporation

    Professor Mamoun Medraj, Dr Mohammad Aljarrah, Dr Ahmad O. Mostafa, Associate Professor Mohammad Aljarrah

  37. Experimental investigation and first-principle calculations coupled with thermodynamic modeling of the Mn–Nd phase diagram

    Article • Calphad, September 2013, Elsevier

    Professor Mamoun Medraj, Dr Ahmad O. Mostafa