All Stories

  1. Enhanced stainless steel cutting quality through optimized air-assisted fiber laser cutting with a novel supersonic nozzle

    Article • Results in Engineering, December 2025, Elsevier

    Assoc. Prof. Ibrahem Maher

  2. Nano-Enhanced Cactus Oil as an MQL Cutting Fluid: Physicochemical, Rheological, Tribological, and Machinability Insights into Machining H13 Steel

    Article • Lubricants, June 2025, MDPI AG

    Assoc. Prof. Ibrahem Maher

  3. The Enhancement of Die Sink EDM Machining Efficiency Incorporating Micro-Flakes of Graphite Powder

    Article • Arabian Journal for Science and Engineering, May 2024, Springer Science + Business Media

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  4. Analysis and development of elliptical tool path in trochoidal milling

    Article • CIRP Journal of Manufacturing Science and Technology, December 2023, Elsevier

    Assoc. Prof. Ibrahem Maher

  5. Ultrasonic Vibration Assisted Electrical Discharge Machining and Micro-Electrical Discharge Machining: A Review

    Article • Machining Science and Technology, October 2023, Taylor & Francis

    Assoc. Prof. Ibrahem Maher

  6. Effects of cold rolling and heat treatment on the microstructure and hardness of pure aluminium

    Article • Materials Today Proceedings, September 2023, Elsevier

    Assoc. Prof. Ibrahem Maher

  7. Controlled Vibration Amplitude in Ultrasonic Assisted Grinding using FRF Guided Cutting Frequency

    Article • International Journal of Machining and Machinability of Materials, January 2023, Inderscience Publishers

    Assoc. Prof. Ibrahem Maher

  8. Controlled vibration amplitude in ultrasonic assisted grinding using FRF guided cutting frequency

    Article • International Journal of Machining and Machinability of Materials, January 2023, Inderscience Publishers

    Assoc. Prof. Ibrahem Maher

  9. Investigation of the Effect of Laser Cutting Parameters On Surface and Kerf Quality of Ti-6al-4v Alloy

    Article • January 2023, Elsevier

    Assoc. Prof. Ibrahem Maher

  10. Surface roughness prediction of polylactic acid (PLA) products manufactured by 3D printing and post processed using a slurry impact technique: ANFIS-based modeling

    Article • Progress in Additive Manufacturing, June 2022, Springer Science + Business Media

    Assoc. Prof. Ibrahem Maher

  11. Improving the performance of tubular solar still integrated with drilled carbonized wood and carbon black thin film evaporation

    Article • Solar Energy, February 2022, Elsevier

    Assoc. Prof. Ibrahem Maher

  12. Improved thermo-economic performance of solar desalination via copper chips, nanofluid, and nano-based phase change material

    Article • Solar Energy, August 2021, Elsevier

    Assoc. Prof. Ibrahem Maher

  13. Development of a New Cost Performance Index (CPI) for Selecting the Most Suitable Wire Electrode in Wire-EDM Machining

    Article • Arabian Journal for Science and Engineering, July 2021, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  14. Adhesion Strength Prediction of CrAlN Coating on Al–Si Alloy (LM28): Fuzzy Modelling

    Article • Metals and Materials International, March 2021, Springer Science + Business Media

    Assoc. Prof. Ibrahem Maher

  15. Adaptive Neuro-Fuzzy Inference System for Modelling the Effect of Slurry Impacts on PLA Material Processed by FDM

    Article • Polymers, December 2020, MDPI AG

    Assoc. Prof. Ibrahem Maher

  16. Manufacturing of porous aluminum 2024 alloy samples with impressive compression properties

    Article • Materials Research Express, April 2019, Institute of Physics Publishing

    Assoc. Prof. Ibrahem Maher

  17. Volumetric shrinkage prediction in fused deposition modelling process - ANFIS modelling approach

    Article • International Journal of Materials and Product Technology, January 2019, Inderscience Publishers

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  18. Volumetric shrinkage prediction in fused deposition modelling process - ANFIS modelling approach

    Article • International Journal of Materials and Product Technology, January 2019, Inderscience Publishers

    Assoc. Prof. Ibrahem Maher

  19. Performance of Electrical Discharge Milling and Sinking in Micro Graphite Powder Mixed Dielectric

    Article • Materials Science Forum, July 2017, Trans Tech Publications

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  20. Wire Rupture Optimization in Wire Electrical Discharge Machining using Taguchi Approach

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  21. 1.9 Effect of Electrical Discharge Energy on White Layer Thickness of WEDM Process

    Article • January 2017, Elsevier

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  22. 1.7 Techniques to Improve EDM Capabilities: A Review

    Article • January 2017, Elsevier

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  23. Proposing a new performance index to identify the effect of spark energy and pulse frequency simultaneously to achieve high machining performance in WEDM

    Article • The International Journal of Advanced Manufacturing Technology, November 2016, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  24. White layer thickness prediction in wire-EDM using CuZn-coated wire electrode – ANFIS modelling

    Article • Transactions of the IMF, July 2016, Taylor & Francis

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  25. Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production

    Article • Journal of Cleaner Production, December 2015, Elsevier

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  26. Investigating the Machinability of Al–Si–Cu cast alloy containing bismuth and antimony using coated carbide insert

    Article • Measurement, February 2015, Elsevier

    Professor Ahmed A. D. Sarhan, Dr Saeed Farahany, Assoc. Prof. Ibrahem Maher

  27. Improve wire EDM performance at different machining parameters - ANFIS modeling

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Assoc. Prof. Ibrahem Maher, Professor Ahmed A. D. Sarhan

  28. Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining

    Article • The International Journal of Advanced Manufacturing Technology, September 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher, Mohamed Eltaib Elmobark

  29. Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining

    Article • The International Journal of Advanced Manufacturing Technology, August 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher

  30. Investigation of the effect of machining parameters on the surface quality of machined brass (60/40) in CNC end milling—ANFIS modeling

    Article • The International Journal of Advanced Manufacturing Technology, June 2014, Springer Science + Business Media

    Professor Ahmed A. D. Sarhan, Assoc. Prof. Ibrahem Maher, Mohamed Eltaib Elmobark