All Stories

  1. Design of a Floating Curved Photovoltaic Panel with IoT-Enabled Weather Monitoring for Rivers and Lakes Environments

    Article • Al-Khwarizmi Engineering Journal, June 2026, Al-Khwarizmi Engineering Journal

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  2. The Role of AI and Advanced Computational Techniques in Transforming Shape Memory Alloy Research

    Article • February 2026, IGI Global

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  3. Smart Nanomaterials in Biomedical Applications

    Article • January 2026, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  4. Synergistic Catalytic Effects of Palladium-Silver Nanocomposites Anchored to Reduced Graphene Oxide for Differential Electrochemical Sensing of Glucose and Ascorbic Acid

    Article • January 2026, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  5. Bioactive Nanomaterials: Revolutionizing Biomedical Science

    Article • November 2025, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  6. Exploring the Mechanical Behavior of Nanomaterials: Elasticity, Strength, and Deformation for Biomedical Applications

    Article • November 2025, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  7. Harnessing the Potential of Smart Nanomaterials: Addressing Healthcare Challenges Through Advances Mechanical Properties

    Article • November 2025, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  8. Robotics and IoT Synergy in Next-Generation Healthcare

    Article • October 2025, IGI Global

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  9. Enhancing tribological properties of N150 mineral engine oil through MWCNT/ZnO nanoparticle additives: A comprehensive study using one-way ANOVA and experimental design

    Article • Next Materials, October 2025, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  10. Transforming Healthcare by Integrating IoT for Enhanced Patient Care and Innovation

    Article • May 2025, IGI Global

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  11. Revolutionizing Virtual Communication

    Article • May 2025, IGI Global

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  12. Innovations and Applications of Advanced Biomaterials in Healthcare and Engineering

    Article • April 2025, IGI Global

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  13. Design and Implementation of IoT-Based Smart Fuel Monitoring System

    Article • February 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  14. Transforming Healthcare Through AI and Robotic Communication Systems

    Article • January 2025, IGI Global

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  15. Environmental impact evaluation using smart real-time weather monitoring systems: a systematic review

    Article • Innovative Infrastructure Solutions, December 2024, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  16. AI-Powered Real-Time Obstacle Detection for UAVs using Blockchain

    Article • December 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  17. Design and Development of an Advanced Load Control System via Arduino

    Article • Al-Iraqia Journal of Scientific Engineering Research, December 2024, Al-Iraqia University

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  18. Performance of spherical and flat solar cells under different environmental conditions

    Article • Energy, October 2024, Emerald

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  19. Modeling Data Set of Indonesian Heart Sound Signals

    Article • September 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  20. Modeling Data Set of Indonesian Heart Sound Signals

    Article • September 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  21. Utilizing Renewable Energy, Technology, and Education for Industry 5.0

    Article • June 2024, IGI Global

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  22. Unravelling Role of the Microwave Sintering Effects on Microstructure, Density, and Corrosion Behaviour of Porous Ti-13.3at.% Nb Shape Memory Alloys

    Article • Metallography Microstructure and Analysis, June 2024, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  23. Analysis and Optimization of Care-purpose Drone For Medical-Based Applications

    Article • March 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  24. Microplastics Isolated from Saltwater Clam Paratapes undulatus from Wet Market at Shah Alam, Selangor, Malaysia

    Article • Malaysian Journal of Fundamental and Applied Sciences, February 2024, Penerbit UTM Press

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  25. Development of an internet of things-based weather station device embedded with O<sub>2</sub>, CO<sub>2</sub>, and CO sensor readings

    Article • International Journal of Electrical and Computer Engineering (IJECE), February 2024, Institute of Advanced Engineering and Science

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  26. Optimization of Wear and Friction in N150 Mineral Engine Oil Modified with Mwcnt/Zno Hybrid Nanoparticles Using One-Way Anova and Experimental Design

    Article • January 2024, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  27. The Impact of IoT and Sensor Integration on Real-Time Weather Monitoring Systems: A Systematic Review

    Article • November 2023, Research Square

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  28. Unravelling Role of the Microwave Sintering Effects on Microstructure, Density, and Corrosion Behavior of porous Ti-13.3at.% Nb Shape Memory Alloys

    Article • October 2023, Research Square

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  29. The effect of CNTs/PEEK coating thickness on the friction and wear behavior of porous Ti‐30Ta alloys for biomaterial implants

    Article • Journal of Applied Polymer Science, August 2023, Wiley

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  30. Design and Performance of A Parabolic Concentrator Solar System embedded with IoT Monitoring System

    Article • August 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  31. Evaluation of microplastics isolated from sea cucumber Acaudina molpadioides in Pulau Langkawi, Malaysia

    Article • Heliyon, June 2023, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  32. Role of ZnO/MWCNTs hybrids nanoparticles addition on the tribological behaviour of SN150 paraffinic mineral oil

    Article • Lubrication Science, May 2023, Wiley

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  33. Introductory Chapter: Gold Nanoparticles – Scientific Background and Potential Horizons

    Article • April 2023, IntechOpen

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  34. Gold Nanoparticles and Their Applications in Engineering

    Article • April 2023, IntechOpen

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  35. The role of deformation in the microstructure, mechanical properties, and shape memory characteristics of Cu-Al-Ni shape memory alloys

    Article • Metallurgical Research & Technology, January 2023, EDP Sciences

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  36. Tribological behavior of porous Ti-56.07wt.% Ni shape memory alloys: Towards a sustainable biomaterials

    Article • January 2023, American Institute of Physics

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi, amir najah

  37. Design and implementation of wireless patient health monitoring system

    Article • January 2023, American Institute of Physics

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  38. Design and Development of an IoT Contactless Door Buzzer, Automation and Home Security Device

    Article • December 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  39. Design and Development of an IoT Virtual Doctor Robot (IVDR) for the Hospital Station

    Article • December 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  40. Raspberry PI Based: Design an Android-Thermal Surveillance Robot

    Article • December 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  41. In vitro microbiologically-induced concrete corrosion behavior of Ag+ loaded zeolite-polyurethane coating for concrete sewer applications

    Article • Journal of Central South University, September 2022, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  42. Design and Fabrication of a Vaccine Refrigeration Box

    Article • July 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  43. Development a Portable Micro-Hydro Power Generation System for Rural Area

    Article • July 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  44. Model-based Design of an Automated Window Slide Controller Embedded with the Multi-sensing System

    Article • July 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  45. Tribological Behavior of a Multi-walled Carbon Nanotube Coated Porous Ti-Ta Shape Memory Alloy

    Article • Journal of Materials Engineering and Performance, June 2022, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  46. Microplastics Isolated From Shellfish Paratapes undulatus From Kuala Selangor, Selangor, Malaysia

    Article • June 2022, Research Square

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  47. MICROPLASTICS IN MARINE BENTHIC FILTER FEEDER: A REVIEW ON THE OCCURRENCE, ROUTES OF INGESTION, METHOD OF EXTRACTION AND EFFECTS TO THE ECOSYSTEM

    Article • Journal of Sustainability Science and Management, May 2022, Penerbit UMT, Universiti Malaysia Terengganu

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  48. In Vitro Microstructure, Shape Memory, Corrosion, and Biocompatibility Characteristics of Porous Ti-51 at.%Ni-xSn Shape Memory Alloys

    Article • Metallography Microstructure and Analysis, February 2022, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  49. Internet of Medical Things

    Article • December 2021, Taylor & Francis

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  50. IoT-Based Healthcare Monitoring Practices during Covid-19

    Article • December 2021, Taylor & Francis

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  51. Towards A Clean Energy: Design A Wind-Solar Hybrid Power Generation System for Highway Streetlights

    Article • December 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  52. Magic Mat: Design A Smart Power Generation System Using Piezoelectric Mechanisms

    Article • December 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  53. Design a Portable Solar Mobile System with an IoT Integration-based

    Article • August 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  54. River Water Quality Robot Embedded with Real-Time Monitoring System: Design and Implementation

    Article • August 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  55. Evaluation of microplastics ingested by sea cucumber Stichopus horrens in Pulau Pangkor, Perak, Malaysia

    Article • Environmental Science and Pollution Research, June 2021, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  56. IoT-Based: Design an Autonomous Bus With QR Code Communication System

    Article • June 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  57. Design a smart infrastructure monitoring system: a response in the age of COVID-19 pandemic

    Article • Innovative Infrastructure Solutions, April 2021, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  58. Automatic Irrigation System: Design and Implementation

    Article • April 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  59. Towards A Sustainable Development Cities Through Smart Shopping Trolly: A Response to the Covid-19 Pandemic

    Article • April 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  60. Evaluation of Microplastics Ingested by Sea Cucumber Stichopus Horrens in Pulau Pangkor, Perak, Malaysia

    Article • March 2021, Research Square

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  61. Opportunities and challenges for the building monitoring systems in the age-pandemic of COVID-19: Review and prospects

    Article • Innovative Infrastructure Solutions, January 2021, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  62. Smart Navigation Aids for Blind and Vision Impairment People

    Article • January 2021, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  63. Influence of Lubrication Technology on Internal Combustion Engine Performance: An Overview

    Article • December 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  64. Effects of varying electrodeposition voltages on surface morphology and corrosion behavior of multi-walled carbon nanotube coated on porous Ti-30 at.%-Ta shape memory alloys

    Article • Surface and Coatings Technology, November 2020, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  65. Role of Ag addition on microstructure, mechanical properties, corrosion behavior and biocompatibility of porous Ti-30 at%Ta shape memory alloys

    Article • Journal of Central South University, November 2020, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  66. Antimicrobial Activity of Musa acuminata Peel Extract against Gram-Positive Bacteria

    Article • International Journal of Life Sciences and Biotechnology, August 2020, International Journal of Life Sciences and Biotechnology, International Society of Academicians

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  67. Cu-Based Shape Memory Alloys: Modified Structures and Their Related Properties

    Article • April 2020, IntechOpen

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  68. Pomelo Peel Extract as Corrosion Inhibitor for Steel in Simulated Seawater and Acidic Mediums

    Article • Journal of Materials Engineering and Performance, April 2020, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  69. Intelligent Monitoring System for Oil Well Efficiency

    Article • February 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi, AP Dr Mohammed Hazim Alkawaz

  70. Shape memory characteristics of microwave sintered porous Ti–30 at.%Ta alloy for biomedical applications

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, January 2020, SAGE Publications

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  71. Hydrogen Embrittlement of 316L Stainless Steels Exposed in 1.0M Hydrochloric Acid Solution

    Article • European Journal of Control, December 2019, International Information and Engineering Technology Association

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  72. Future Prospects: Shape Memory Features in Shape Memory Polymers and Their Corresponding Composites

    Article • November 2019, IntechOpen

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  73. Load Balancing Approach of Protection in Datacenters: A Narrative Review

    Article • November 2019, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  74. A Smart Automated Greenhouse: Soil Moisture, Temperature Monitoring and Automatic Water Supply System (Peaty, Loam and Silty)

    Article • November 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  75. A Digital Eye Navigators for the Visually Impaired

    Article • October 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi, AP Dr Mohammed Hazim Alkawaz

  76. Synthesis of nano-alumina powder via recrystallization of ammonium alum

    Article • Cerâmica, June 2019, FapUNIFESP (SciELO)

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  77. Modeling the Physical Properties of Gamma Alumina Catalyst Carrier Based on an Artificial Neural Network

    Article • Materials, May 2019, MDPI AG

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  78. Corrosion Behavior of Cu–Al–Ni–xCo Shape Memory Alloys Coupled with Low-Carbon Steel for Civil Engineering Applications

    Article • Journal of Bio- and Tribo-Corrosion, April 2019, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  79. Deformation Influences on Microstructure, Mechanical Properties, and Shape Memory Behavior of Cu–Al–Ni–xTi Shape Memory Alloys

    Article • Metallography Microstructure and Analysis, April 2019, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  80. In Vitro Microstructure, Mechanical Properties and Corrosion Behaviour of Low, Medium and High Carbon Steel Under Different Heat Treatments

    Article • Journal of Bio- and Tribo-Corrosion, March 2019, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  81. Microstructure, Phase Transformation, Mechanical Behavior, Bio-corrosion and Antibacterial Properties of Ti-Nb-xSn (x = 0, 0.25, 0.5 and 1.5) SMAs

    Article • Journal of Materials Engineering and Performance, November 2018, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  82. The Effect of Aging on the Transformation Temperatures and Microstructure of Cualni-Mn Shape Memory Alloys

    Article • Journal of Physics Conference Series, August 2018, Institute of Physics Publishing

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  83. Optimization of ceramic thermal insulation behavior using the genetic algorithm

    Article • European Journal of Control, June 2018, International Information and Engineering Technology Association

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  84. Powder Metallurgy Fabrication of Porous 51(at.%)Ni–Ti Shape Memory Alloys for Biomedical Applications

    Article • Shape Memory and Superelasticity, May 2018, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  85. SILVER ADDITIONS INFLUENCE ON BIOMEDICAL POROUS TI-NI SMAS FABRICATED BY MICROWAVE SINTERING

    Article • Jurnal Teknologi (Sciences & Engineering), April 2018, Penerbit UTM Press

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  86. Parameter optimization of microwave sintering porous Ti-23%Nb shape memory alloys for biomedical applications

    Article • Transactions of Nonferrous Metals Society of China, April 2018, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  87. Microstructure and superelastic properties of free forged Ti–Ni shape-memory alloy

    Article • Transactions of Nonferrous Metals Society of China, March 2018, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  88. Microstructure, Mechanical Properties, and Shape Memory Effect of Annealed Cu-Al-Ni-xCo Shape Memory Alloys

    Article • Metallography Microstructure and Analysis, December 2017, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  89. Fabrication and characterisation of novel ZnO/MWCNT duplex coating deposited on Mg alloy by PVD coupled with dip-coating techniques

    Article • Journal of Alloys and Compounds, December 2017, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  90. Effect of Sn additions on the microstructure, mechanical properties, corrosion and bioactivity behaviour of biomedical Ti–Ta shape memory alloys

    Article • Journal of Thermal Analysis and Calorimetry, August 2017, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  91. Study of X-phase formation on Cu-Al-Ni shape memory alloys with Ti addition

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, June 2017, Universiti Malaysia Pahang Publisher

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  92. Effect of deformation on the microstructure, transformation temperature and superelasticity of Ti–23 at% Nb shape-memory alloys

    Article • Materials & Design, March 2017, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  93. Microwave sintering effects on the microstructure and mechanical properties of Ti−51at%Ni shape memory alloys

    Article • International Journal of Minerals Metallurgy and Materials, March 2017, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  94. An overview of phase change materials for construction architecture thermal management in hot and dry climate region

    Article • Applied Thermal Engineering, February 2017, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi, Professor Seyed Ehsan Hosseini

  95. Influence of Ce addition on biomedical porous Ti-51 atomic percentage (at. %) Ni shape memory alloy fabricated by microwave sintering

    Article • January 2017, American Institute of Physics

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  96. Defocusing Effects of Laser Beam on the Weldability of Powder Metallurgy Ti-Based Shape Memory Alloys

    Article • Procedia Engineering, January 2017, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  97. Effect of Ta Additions on the Microstructure, Damping, and Shape Memory Behaviour of Prealloyed Cu-Al-Ni Shape Memory Alloys

    Article • Scanning, January 2017, Hindawi Publishing Corporation

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  98. Effect of Microwave Sintering Time and Homogenization Treatment on Biomedical Ti-51%Ni SMAs

    Article • Indian Journal of Science and Technology, December 2016, Indian Society for Education and Environment

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  99. Corrosion and bioactivity performance of graphene oxide coating on Ti Nb shape memory alloys in simulated body fluid

    Article • Materials Science and Engineering C, November 2016, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  100. Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys

    Article • Welding in the World, September 2016, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  101. The Interface Morphology of Thixo-Joined Dissimilar Steels

    Article • Solid State Phenomena, September 2016, Trans Tech Publications

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi, Manal Elkalosh, Assoc. Prof. Dr. Mohammed N. Abdulrazaq

  102. Structure, corrosion behavior, and antibacterial properties of nano-silica/graphene oxide coating on biodegradable magnesium alloy for biomedical applications

    Article • Vacuum, September 2016, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  103. Influence of Tin Additions on the Phase-Transformation Characteristics of Mechanical Alloyed Cu-Al-Ni Shape-Memory Alloy

    Article • Metallurgical and Materials Transactions A, July 2016, Springer Science + Business Media

    Assoc. Prof. Dr. Mohammed N. Abdulrazaq, Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  104. Synthesis and corrosion behavior of a hybrid bioceramic-biopolymer coating on biodegradable Mg alloy for orthopaedic implants

    Article • Journal of Alloys and Compounds, November 2015, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  105. The Mechanical Properties and Corrosion Behavior of Double-Layered Nano Hydroxyapatite-Polymer Coating on Mg-Ca Alloy

    Article • Journal of Materials Engineering and Performance, August 2015, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  106. Effect of a fourth alloying element on the microstructure and mechanical properties of Cu–Al–Ni shape memory alloys

    Article • Journal of Materials Research, July 2015, Cambridge University Press

    Esah Hamzah, Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  107. X-phase precipitation in aging of Cu–Al–Ni–xTi shape memory alloys and its influence on phase transition behavior

    Article • Journal of Thermal Analysis and Calorimetry, July 2015, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  108. PHASE TRANSFORMATION AND MICROSTRUCTURE BEHAVIOUR OF CU-AL-NI SHAPE MEMORY ALLOYS INCORPORATED WITH COBALT ADDITION

    Article • Jurnal Teknologi (Sciences & Engineering), June 2015, Penerbit UTM Press

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  109. Effect of Quarterly Element Addition of Cobalt on Phase Transformation Characteristics of Cu-Al-Ni Shape Memory Alloys

    Article • Metallurgical and Materials Transactions A, May 2015, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  110. Correlation of microstructural and corrosion characteristics of quaternary shape memory alloys Cu–Al–Ni–X (X=Mn or Ti)

    Article • Transactions of Nonferrous Metals Society of China, April 2015, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  111. Effects of Quenching Media on Phase Transformation Characteristics and Hardness of Cu-Al-Ni-Co Shape Memory Alloys

    Article • Journal of Materials Engineering and Performance, February 2015, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi, Dr Saeed Farahany

  112. Bi-layer nano-TiO2/FHA composite coatings on Mg–Zn–Ce alloy prepared by combined physical vapour deposition and electrochemical deposition methods

    Article • Vacuum, December 2014, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  113. Thermal aging behavior in Cu–Al–Ni–xCo shape memory alloys

    Article • Journal of Thermal Analysis and Calorimetry, November 2014, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  114. Influence of Silver nanoparticles addition on the phase transformation, mechanical properties and corrosion behaviour of Cu–Al–Ni shape memory alloys

    Article • Journal of Alloys and Compounds, November 2014, Elsevier

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi, Dr Saeed Farahany

  115. Effect of Electrodeposition Parameters on the Microstructure and Corrosion Behavior of ‎ DCPD Coatings on Biodegradable M g– ...

    Article • International Journal of Applied Ceramic Technology, September 2014, Wiley

    Professor Mamoun Medraj, Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  116. Influence of Ti additions on the martensitic phase transformation and mechanical properties of Cu–Al–Ni shape memory alloys

    Article • Journal of Thermal Analysis and Calorimetry, July 2014, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  117. Effects of Mn Additions on the Structure, Mechanical Properties, and Corrosion Behavior of Cu-Al-Ni Shape Memory Alloys

    Article • Journal of Materials Engineering and Performance, July 2014, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  118. Microstructure and corrosion behaviour of Cu-Al-Ni shape memory alloys with Ag nanoparticles

    Article • Werkstoffe und Korrosion, May 2014, Wiley

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  119. The Influence of γ-Irradiation on the Structure and Properties of the Cu-11.5 wt. % Al-4 wt. % Ni Shape Memory Alloys

    Article • Advanced Materials Research, December 2013, Trans Tech Publications

    Esah Hamzah, Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  120. Structure-Property Relationship of Cu-Al-Ni-Fe Shape Memory Alloys in Different Quenching Media

    Article • Journal of Materials Engineering and Performance, October 2013, Springer Science + Business Media

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi, Dr Saeed Farahany

  121. Influence of addition of carbon nanotubes on structure–properties of Cu–Al–Ni shape memory alloys

    Article • Materials Science and Technology, October 2013, Taylor & Francis

    Associate Prof Ts Dr. Safaa Najah Saud AlHumairi

  122. A Review on Influence of Alloying Elements on the Microstructure and Mechanical Properties of Cu-Al-Ni Shape Memory Alloys

    Article • Jurnal Teknologi (Sciences & Engineering), September 2013, Penerbit UTM Press

    Esah Hamzah, Associate Prof Ts Dr. Safaa Najah Saud AlHumairi