All Stories

  1. Thin‐Film Thermal Sensors on Chitosan Substrates for Sustainable Transient Electronics
  2. Naturally derived polymer-based substrates for flexible and transient temperature sensors
  3. Thin-Film Devices on Flexible and Unobtrusive Cellulose for Sustainable Temperature Sensing
  4. Spectroscopic characterization of 3D photonic crystals
  5. Application of Agave Silk Fibers in Sustainable and Flexible Electronics
  6. Conjugated Polymer Nanoparticles for Multifunctional Bioelectronics and Sensing P3ht:Pcbm-Nps Embedded in Peo Hydrogel
  7. Thermal Sensors on Cellulose Based Substrate for Green Thin-Film Electronics
  8. Time-Resolved Analysis of Near-Infrared Porphyrinbased OLEDs for Future Flexible Applications: A Study on Host-Guest Energy Transfer and Singlet (re)Genreation From Triplets Mechanisms in Porphyrin-Based, Near-Infrared Emitting OLEDs, Providing Insight...
  9. Unveiling the Role of Guanidinium for Enhanced Charge Extraction in Inverted Perovskite Solar Cells
  10. Conjugated Polymer Nanoparticles for Biophotonic Applications: Preparation, Characterization, and Simulation in Biohybrid Interfaces
  11. Harnessing biomaterials for advanced biosensor and bioelectronic devices development: From natural chromophores to biodegradable substrates and peptide-based detection of nanoplastics
  12. Enhancing Screen-Printed Electrode Performance through Simulation-Driven Design Optimization for Wearable Applications
  13. Conjugated polymer nanoparticles boosting growth and photosynthesis in biohybrid plants
  14. Indium-Gallium-Zinc-Oxide Based Semitransparent Electrodes on Flexible Substrates for Biodegradable Electronics
  15. A Conjugated Carboranyl Main Chain Polymer with Aggregation-Induced Emission in the Near-Infrared
  16. Biomimetic Approaches to “Transparent” Photovoltaics: Current and Future Applications
  17. Biomimetic Approaches to “Transparent” Photovoltaics: Current and Future Applications
  18. A porphyrin pentamer as a bright emitter for NIR OLEDs
  19. Inverted organic photovoltaics with a solution-processed Mg-doped ZnO electron transport layer annealed at 150 °C
  20. Diarylethenes in Optically Switchable Organic Light‐Emitting Diodes: Direct Investigation of the Reversible Charge Carrier Trapping Process
  21. Molecular Encapsulation of Naphthalene Diimide (NDI) Based π‐Conjugated Polymers: A Tool for Understanding Photoluminescence
  22. Nanoscale Photoluminescence Manipulation in Monolithic Porous Silicon Oxide Microcavity Coated with Rhodamine‐Labeled Polyelectrolyte via Electrostatic Nanoassembling
  23. Non-toxic near-infrared light-emitting diodes
  24. Perspectives of Organic and Perovskite‐Based Spintronics
  25. Ultrathin, Ultra‐Conformable, and Free‐Standing Tattooable Organic Light‐Emitting Diodes
  26. Towards efficient near-infrared fluorescent organic light-emitting diodes
  27. Inverted organic photovoltaics with a solution-processed ZnO/MgO electron transport bilayer
  28. Intrinsic photogeneration of long-lived charges in a donor-orthogonal acceptor conjugated polymer
  29. Charge Transport Layers in Halide Perovskite Photonic Devices
  30. Suppressing Solid-State Quenching in Red-Emitting Conjugated Polymers
  31. Chiral Oligothiophenes with Remarkable Circularly Polarized Luminescence and Electroluminescence in Thin Films
  32. Lanthanide-Induced Photoluminescence in Lead-Free Cs2AgBiBr6 Bulk Perovskite: Insights from Optical and Theoretical Investigations
  33. Expanded Multiband Super-Nyquist CAP Modulation for Highly Bandlimited Organic Visible Light Communications
  34. Visible light communication with efficient far-red/near-infrared polymer light-emitting diodes
  35. Modulating the luminance of organic light-emitting diodes via optical stimulation of a photochromic molecular monolayer at transparent oxide electrode
  36. A film-forming graphene/diketopyrrolopyrrole covalent hybrid with far-red optical features: Evidence of photo-stability
  37. Doubly Encapsulated Perylene Diimides: Effect of Molecular Encapsulation on Photophysical Properties
  38. Near‐Infrared (NIR) Organic Light‐Emitting Diodes (OLEDs): Challenges and Opportunities
  39. Low-Temperature Solution-Processed Thin SnO2/Al2O3 Double Electron Transport Layers Toward 20% Efficient Perovskite Solar Cells
  40. Hybrid Super-Nyquist CAP Modulation based VLC with Low Bandwidth Polymer LEDs
  41. The resurgence of organic photovoltaics
  42. Experimental Demonstration of Staggered CAP Modulation for Low Bandwidth Red-Emitting Polymer-LED Based Visible Light Communications
  43. Will This Be the Century of Photonics? An Organic and Bio‐Inspired Materials Perspective
  44. Mapping Sub‐Surface Structure of Thin Films in Three Dimensions with an Optical Near‐Field
  45. Optoelectronic Modelling, Circuit Design and Modulation for Polymer-Light Emitting Diodes for Visible Light Communication Systems
  46. Optically switchable organic light-emitting transistors
  47. Near‐Infrared (NIR) Organic Light‐Emitting Diodes (OLEDs): Challenges and Opportunities
  48. Perovskite solar cell resilience to fast neutrons
  49. Black GaAs by Metal-Assisted Chemical Etching
  50. Tetraphenylethylene-BODIPY aggregation-induced emission luminogens for near-infrared polymer light-emitting diodes
  51. Efficient Near-Infrared Electroluminescence at 840 nm with “Metal-Free” Small-Molecule:Polymer Blends
  52. Highly efficient perovskite solar cells for light harvesting under indoor illumination via solution processed SnO2/MgO composite electron transport layers
  53. Highly Luminescent Encapsulated Narrow Bandgap Polymers Based on Diketopyrrolopyrrole
  54. Polystyrene nanoparticle-templated hollow titania nanosphere monolayers as ordered scaffolds
  55. C-Si hybrid photonic structures by full infiltration of conjugated polymers into porous silicon rugate filters
  56. Assembly of graphene nanoflake–quantum dot hybrids in aqueous solution and their performance in light-harvesting applications
  57. Organic visible light communications: Methods to achieve 10 Mb/s
  58. Template-Assisted Preparation of Micrometric Suspended Membrane Lattices of Photoluminescent and Non-Photoluminescent Polymers by Capillarity-Driven Solvent Evaporation: Application to Microtagging
  59. Thermally induced suppression of interchain interactions in dilute aqueous solutions of conjugated polyelectrolyte rotaxanes and their analogues
  60. Synthesis and Exciton Dynamics of Donor-Orthogonal Acceptor Conjugated Polymers: Reducing the Singlet–Triplet Energy Gap
  61. Highly Efficient Solid-State Near-infrared Organic Light-Emitting Diodes incorporating A-D-A Dyes based on α,β-unsubstituted “BODIPY” Moieties
  62. Ionic Strength Responsive Sulfonated Polystyrene Opals
  63. Neutron Radiation Tolerance of Two Benchmark Thiophene-Based Conjugated Polymers: the Importance of Crystallinity for Organic Avionics
  64. Modifying the Size of Ultrasound-Induced Liquid-Phase Exfoliated Graphene: From Nanosheets to Nanodots
  65. Neutron polarisation analysis of Polymer:Fullerene blends for organic photovoltaics
  66. Tuning Fullerene Intercalation in a Poly (thiophene) derivative by Controlling the Polymer Degree of Self-Organisation
  67. Triazolobenzothiadiazole-Based Copolymers for Polymer Light-Emitting Diodes: Pure Near-Infrared Emission via Optimized Energy and Charge Transfer
  68. Experimental and Computational Study on the Temperature Behavior of CNT Networks
  69. Traceable atomic force microscopy of high-quality solvent-free crystals of [6,6]-phenyl-C61-butyric acid methyl ester
  70. Highly red-shifted NIR emission from a novel anthracene conjugated polymer backbone containing Pt(ii) porphyrins
  71. Luminescent Neutral Cu(I) Complexes: Synthesis, Characterization and Application in Solution-Processed OLED
  72. Increased luminescence efficiency by synergistic exploitation of lipo/hydrophilic co-solvency and supramolecular design
  73. Synthesis and photophysical characteristics of polyfluorene polyrotaxanes
  74. Investigation Of The Bragg-Snell Law In Photonic Crystals
  75. Wavelength-Multiplexed Polymer LEDs: Towards 55 Mb/s Organic Visible Light Communications
  76. Experimental and computational study on the temperature behavior of CNT networks
  77. Electrostatic discharge sensitivity investigation on organic field-effect thin film transistors
  78. Low-gap polymers incorporating a dicarboxylic imide moiety for near-infrared polymer light-emitting diodes
  79. Low-Temperature Photoluminescence Spectroscopy of Solvent-Free PCBM Single-Crystals
  80. Thermal treatment and chemical doping of semi-transparent graphene films
  81. Geometric and Electronic Structures of Boron(III)-Cored Dyes Tailored by Incorporation of Heteroatoms into Ligands
  82. Luminescent Properties of a Water-Soluble Conjugated Polymer Incorporating Graphene-Oxide Quantum Dots
  83. Thia- and selena-diazole containing polymers for near-infrared light-emitting diodes
  84. Inorganic caesium lead iodide perovskite solar cells
  85. Polyrotaxanes (Conjugated)
  86. Synergic Integration of Conjugated Luminescent Polymers and Three-Dimensional Silicon Microstructures for the Effective Synthesis of Photoluminescent Light Source Arrays
  87. Virtually pure near-infrared electroluminescence from exciplexes at polyfluorene/hexaazatrinaphthylene interfaces
  88. A 20-Mb/s VLC Link With a Polymer LED and a Multilayer Perceptron Equalizer
  89. Analysis of sprayed Carbon nanotube films on rigid and flexible substrates
  90. Optical and Electroluminescent Properties of Conjugated Polyrotaxanes
  91. Organic visible light communications: Recent progress
  92. A 10 Mb/s visible light communication system using a low bandwidth polymer light-emitting diode
  93. 10  Mb/s visible light transmission system using a polymer light-emitting diode with orthogonal frequency division multiplexing
  94. Synthesis and Photophysics of Coaxial Threaded Molecular Wires: Polyrotaxanes with Triarylamine Jackets
  95. Visible light communications: real time 10 Mb/s link with a low bandwidth polymer light-emitting diode
  96. Multifunctional materials for OFETs, LEFETs and NIR PLEDs
  97. Next Generation Visible Light Communications: 10 Mb/s with Polymer Light-Emitting Diodes
  98. Effect of permodified β-cyclodextrin on the photophysical properties of poly[2,7-(9,9-dioctylfluorene)-alt-(5,5′-bithiophene)] main chain polyrotaxanes
  99. Structural and dynamical characterization of P3HT/PCBM blends
  100. Fluorescent polystyrene photonic crystals self-assembled with water-soluble conjugated polyrotaxanes
  101. Two-Dimensional Array of Photoluminescent Light Sources by Selective Integration of Conjugated Luminescent Polymers into Three-Dimensional Silicon Microstructures
  102. Efficient red electroluminescence from diketopyrrolopyrrole copolymerised with a polyfluorene
  103. Immune responses of Octopus vulgaris (Mollusca: Cephalopoda) exposed to titanium dioxide nanoparticles
  104. Resonance Raman Investigation of β-Cyclodextrin-Encapsulated π-Conjugated Polymers
  105. Polymorphism, Fluorescence, and Optoelectronic Properties of a Borazine Derivative
  106. Near-Infrared Polymer Light-Emitting Diodes Based on Low-Energy Gap Oligomers Copolymerized into a High-Gap Polymer Host
  107. Straightforward access to diketopyrrolopyrrole (DPP) dimers
  108. Micro-focused X-ray diffraction characterization of high-quality [6,6]-phenyl-C61-butyric acid methyl ester single crystals without solvent impurities
  109. Enhanced crystallinity and film retention of P3HT thin-films for efficient organic solar cells by use of preformed nanofibers in solution
  110. Polyrotaxanes (Conjugated)
  111. Increased efficiency of light-emitting diodes incorporating anodes functionalized with fluorinated azobenzene monolayers and a green-emitting polyfluorene derivative
  112. Efficient light confinement with nanostructured optical microfiber tips
  113. Sub-wavelength focusing of high intensities in microfibre tips
  114. Large Work Function Shift of Gold Induced by a Novel Perfluorinated Azobenzene-Based Self-Assembled Monolayer
  115. The influence of the substrate thermal conductivity on scanning thermochemical lithography
  116. Emission Color Trajectory and White Electroluminescence Through Supramolecular Control of Energy Transfer and Exciplex Formation in Binary Blends of Conjugated Polyrotaxanes
  117. Superficial fluoropolymer layers for efficient light-emitting diodes
  118. A Quaterthiophene‐Based Rotaxane: Synthesis, Spectroscopy, and Self‐Assembly at Surfaces
  119. Cross-linking of a poly(3,4-ethylene dioxythiophene):(polystyrene sulfonic acid) hole injection layer with a bis-azide salt and the effect of atmospheric processing conditions on device properties
  120. Dopant optimization for triplet harvesting in polymer photovoltaics
  121. Low-temperature treatment of semiconducting interlayers for high-efficiency light-emitting diodes based on a green-emitting polyfluorene derivative
  122. Functional Supramolecular Architectures. For Organic Electronics and Nanotechnology. Herausgegeben von Paolo Samorì und Franco Cacialli.
  123. Functional Supramolecular Architectures. For Organic Electronics and Nanotechnology. Edited by Paolo Samorì and Franco Cacialli.
  124. Linear and Cyclic Porphyrin Hexamers as Near-Infrared Emitters in Organic Light-Emitting Diodes
  125. Mastering Self-Organization of Functional Materials at Different Length Scale
  126. Time dependence and freezing-in of the electrode oxygen plasma-induced work function enhancement in polymer semiconductor heterostructures
  127. Non-conventional Processing and Post-processing Methods for the Nanostructuring of Conjugated Materials for Organic Electronics
  128. Highly Polarized Emission from Oriented Films Incorporating Water‐Soluble Conjugated Polymers in a Polyvinyl Alcohol Matrix
  129. Local Surface Potential of π-Conjugated Nanostructures by Kelvin Probe Force Microscopy: Effect of the Sampling Depth
  130. Functional Supramolecular Architectures
  131. Dual functions of a novel low-gap polymer for near infra-red photovoltaics and light-emitting diodes
  132. Photoinduced work function changes by isomerization of a densely packed azobenzene-based SAM on Au: a joint experimental and theoretical study
  133. Self‐Assembled Conjugated Thiophene‐Based Rotaxane Architectures: Structural, Computational, and Spectroscopic Insights into Molecular Aggregation
  134. Corrigendum: A Conjugated Thiophene‐Based Rotaxane: Synthesis, Spectroscopy, and Modeling
  135. Optical and Electroluminescent Properties of Conjugated Polyrotaxanes
  136. Ultra‐Broad Optical Amplification and Two‐Colour Amplified Spontaneous Emission in Binary Blends of Insulated Molecular Wires
  137. Stability of optical and electroluminescence properties of a semiconducting polymer over a decade
  138. Interfacial dipole dynamics of light-emitting diodes incorporating a poly(amidoamine) dendrimer monolayer
  139. High-Resolution Scanning Near-Field Optical Lithography of Conjugated Polymers
  140. Enhanced luminescence properties of highly threaded conjugated polyelectrolytes with potassium counter-ions upon blending with poly(ethylene oxide)
  141. White luminescence from single-layer devices of nonresonant polymer blends
  142. Synthesis, Characterization, and Surface Initiated Polymerization of Carbazole Functionalized Isocyanides
  143. A Conjugated Thiophene‐Based Rotaxane: Synthesis, Spectroscopy, and Modeling
  144. Light-emitting electrochemical cells using polymeric ionic liquid/polyfluorene blends as luminescent material
  145. White Electroluminescence by Supramolecular Control of Energy Transfer in Blends of Organic‐Soluble Encapsulated Polyfluorenes
  146. Thermochemical nanopatterning of organic semiconductors
  147. Oxidised carbon nanotubes as solution processable, high work function hole-extraction layers for organic solar cells
  148. Taming Complexity: From Supramolecules to Suprafunctions
  149. Influence of cyclodextrin size on fluorescence quenching in conjugated polyrotaxanes by methyl viologen in aqueous solution
  150. Synthesis of type II/type I CdTe/CdS/ZnS quantum dots and their use in cellular imaging
  151. Tuning Intrachain versus Interchain Photophysics via Control of the Threading Ratio of Conjugated Polyrotaxanes
  152. Synthesis and Optoelectronic Properties of Nonpolar Polyrotaxane Insulated Molecular Wires with High Solubility in Organic Solvents
  153. Photoacid cross-linkable polyfluorenes for optoelectronics applications
  154. Control of Rapid Formation of Interchain Excited States in Sugar‐Threaded Supramolecular Wires
  155. Cyclodextrin‐Threaded Conjugated Polyrotaxanes for Organic Electronics: The Influence of the Counter Cations
  156. The Built-In Potential in Blue Polyfluorene-Based Light-Emitting Diodes
  157. Polyfluorene-based light-emitting diodes with an azide photocross-linked poly(3,4-ethylene dioxythiophene):(polystyrene sulfonic acid) hole-injecting layer
  158. Amylose-wrapped luminescent conjugated polymers
  159. Self-assembled monolayers of protonated poly(amidoamine) dendrimers on indium tin oxide
  160. Preparation and Characterization of Dense Films of Poly(amidoamine) Dendrimers on Indium Tin Oxide
  161. Phase Segregation in Thin Films of Conjugated Polyrotaxane– Poly(ethylene oxide) Blends: A Scanning Force Microscopy Study
  162. The influence of subgap features in the electromodulation and built-in voltage measurements of polyfluorene blue light-emitting diodes with anodic charge injection layers
  163. Preface
  164. Scanning force microscopy and optical spectroscopy of phase-segregated thin films of poly(9,9′-dioctylfluorene-alt-benzothiadiazole) and poly(ethylene oxide)
  165. Control of luminescence in conjugated polymers through control of chain microstructure
  166. Electric-Field-Assisted Alignment of Supramolecular Fibers
  167. Towards Complex Functions from Complex Materials
  168. Optical properties of cross-linkable fluorene copolymers
  169. Shape dependent thermal effects in apertured fiber probes for scanning near-field optical microscopy
  170. Local Probing of Photocurrent and Photoluminescence in a Phase-Separated Conjugated-Polymer Blend by Means of Near-Field Excitation
  171. Investigation of Charge-Injection Barriers in Finished PLEDs by Means of Non-Invasive Optical Probing
  172. Supramolecular Complexes of Conjugated Polyelectrolytes with Poly(ethylene oxide): Multifunctional Luminescent Semiconductors Exhibiting Electronic and Ionic Transport
  173. Indium-tin oxide anodes modified by self-assembly for light-emitting diodes based on blue-emitting polyfluorenes
  174. Thermal processes in metal-coated fiber probes for near-field experiments
  175. Suppression of Green Emission in a New Class of Blue-Emitting Polyfluorene Copolymers with Twisted Biphenyl Moieties
  176. Observation of tip-to-sample heat transfer in near-field optical microscopy using metal-coated fiber probes
  177. A two-dimensional photonic structure made from a conjugated, fluorescent polymer
  178. Optical probing of sample heating in scanning near-field experiments with apertured probes
  179. Thermal effects in near-field optical microscopy experiments
  180. Preface
  181. Growth of ordered poly(ethylene-oxide) thin films from solutions: an SFM study
  182. Investigation of heating effects in near-field experiments with luminescent organic semiconductors
  183. Modelling topographical artifacts in scanning near-field optical microscopy
  184. Synthesis and luminescence properties of a new polyfluorene copolymer with regulated solubility
  185. Fabrication of conjugated polymers nanostructures via direct near-field optical lithography
  186. Near–field microscopy and lithography of light–emitting polymers
  187. Supramolecular architectures
  188. Effect of a dipolar self-assembly monolayer formation on indium-tin oxide on the performance of single-layer polymer-based light-emitting diodes
  189. Synthesis of Conjugated Polyrotaxanes
  190. Surface conditioning of indium-tin oxide anodes for organic light-emitting diodes
  191. Contact optimization in polymer light‐emitting diodes
  192. Electronic line-up in light-emitting diodes with alkali-halide/metal cathodes
  193. Luminescence properties of polyfluorenes blends
  194. Steady state and time-resolved photoluminescence properties of alternating polyfluorene copolymers
  195. Synthesis and luminescence properties of three novel polyfluorene copolymers
  196. Self-assembly surface modified indium tin oxide anodes for single-layer light-emitting diodes
  197. Near-field optical lithography of a conjugated polymer
  198. Organic semiconductors nanostructures: From near-field direct lithography of a conjugated polymer to insulated molecular wires for plastic electronics
  199. Polymer electronics: the skill lies in the blending
  200. Cyclodextrin-threaded conjugated polyrotaxanes as insulated molecular wires with reduced interstrand interactions
  201. Preface
  202. Synthesis and characterisation of poly(distyrylbenzene-block-hexa(ethylene oxide)) and its fluorinated analogue—two new block copolymers and their application in electroluminescent devices
  203. Improved efficiency of light-emitting diodes based on polyfluorene blends upon insertion of a poly(p-phenylene vinylene) electron- confinement layer
  204. Tuning the optoelectronic properties of polyfluorenes by copolymerisation with thiophene moieties
  205. New family of polyfluorene copolymers for light-emitting devices
  206. Cathodes incorporating thin fluoride layers for efficient injection in blue polymer light-emitting diodes
  207. Excitation energy transfer and spatial exciton confinement in polyfluorene blends for application in light-emitting diodes
  208. The influence of LiF thickness on the built-in potential of blue polymer light-emitting diodes with LiF/Al cathodes
  209. Optical and morphological investigations of non-homogeneity in polyfluorene blends
  210. Fluorine-substituted poly(p-phenylenes vinylenes) copolymers
  211. Erratum: “Ultraviolet–visible near-field microscopy of phase-separated blends of polyfluorene-based conjugated semiconductors” [Appl. Phys. Lett. 79, 833 (2001)]
  212. Ultraviolet–visible near-field microscopy of phase-separated blends of polyfluorene-based conjugated semiconductors
  213. Efficient electron injection in blue-emitting polymer light-emitting diodes with LiF/Ca/Al cathodes
  214. De-mixing of Polyfluorene-Based Blends by Contact with Acetone: Electro- and Photo-luminescence Probes
  215. Versatile synthesis of various conjugated aromatic homo- and copolymers
  216. Alteration of the photo and electroluminescent properties of poly(p-phenylene vinylene) upon addition of indium chloride
  217. Light-emitting electrochemical cells based on poly(p-phenylene vinylene) copolymers with ion-transporting side groups
  218. Near-infrared electroluminescence of polymer light-emitting diodes doped with a lissamine-sensitized Nd3+ complex
  219. Light-Emitting Devices Based on a Poly(p-phenylenevinylene) Statistical Copolymer with Oligo(ethylene oxide) Side Groups
  220. Efficient electroluminescent poly(p-phenylene vinylene) copolymers for application in LEDs
  221. Luminescence properties of a PPV-based statistical copolymer with glyme-like side groups
  222. New routes to monomers and polymers for LEDs
  223. Energy level line-up in polymer light-emitting diodes via electroabsorption spectroscopy
  224. Poly(distyrylbenzene-block-sexi(ethylene oxide)), a highly luminescent processable derivative of PPV
  225. Electrochemical and luminescent properties of poly(fluorene) derivatives for optoelectronic applications
  226. Förster energy transfer and control of the luminescence in blends of an orange­emitting poly(p­phenylenevinylene) and a red­emitting tetraphenylporphyrin
  227. Design of Luminescent Polymers for Leds
  228. Near-field photoconductivity imaging of a conjugated polymer blend
  229. LiF/Al cathodes and the effect of LiF thickness on the device characteristics and built-in potential of polymer light-emitting diodes
  230. Environmental aging of poly(p-phenylenevinylene) based light-emitting diodes
  231. Tuning the red emission of a soluble poly(p-phenylene vinylene) upon grafting of porphyrin side groups
  232. Effect of poly(3,4-ethylene dioxythiophene) on the built-in field in polymer light-emitting diodes probed by electroabsorption spectroscopy
  233. Kelvin probe and ultraviolet photoemission measurements of indium tin oxide work function: a comparison
  234. Blue light-emitting diodes from a meta-linked 2,3 substituted alkoxy poly(p-phenylenevinylene)
  235. Hall measurements of treated indium tin oxide surfaces
  236. Luminescence properties of PPV-based copolymers with crown ether substituents
  237. Role of indium chloride on the luminescence properties of PPV
  238. Surface wetting properties of treated indium tin oxide anodes for polymer light-emitting diodes
  239. Electrochemical and Electroluminescent Properties of Random Copolymers of Fluorine- and Alkoxy-Substituted Poly(p-phenylene vinylene)s
  240. High photo and electroluminescence efficiency oligothiophenes
  241. The copolymer route to new luminescent materials for LEDs
  242. Molecular-scale interface engineering for polymer light-emitting diodes
  243. Surface and bulk phenomena in conjugated polymers devices
  244. Organic semiconductors for the new millennium
  245. Efficient blue–green light emitting poly(1,4-phenylene vinylene) copolymers
  246. Design and synthesis of conjugated materials for efficient optoelectronic devices
  247. Light-emitting devices based on a poly(p-phenylene vinylene) derivative with ion-coordinating side groups
  248. X-ray photoelectron spectroscopy of surface-treated indium-tin oxide thin films
  249. Modified Oligothiophenes with High Photo- and Electroluminescence Efficiencies
  250. Built-in field electroabsorption spectroscopy of polymer light-emitting diodes incorporating a doped poly(3,4-ethylene dioxythiophene) hole injection layer
  251. Surface energy and polarity of treated indium–tin–oxide anodes for polymer light-emitting diodes studied by contact-angle measurements
  252. Work Functions and Surface Functional Groups of Multiwall Carbon Nanotubes
  253. Precision and control in polymer synthesis why it's important and some recent examples of how to do it
  254. High-efficiency oligothiopene-based light-emitting diodes
  255. Increase of charge carriers density and reduction of Hall mobilities in oxygen-plasma treated indium–tin–oxide anodes
  256. A green emitting, alkoxy disubstituted poly(p-phenylene vinylene) for Electroluminescent Devices
  257. A highly luminescent polymer for LEDs
  258. Electroluminescence lifetime and efficiency of polymer LEDs with surface-treated anodes
  259. Synthesis and properties of poly(arylene vinylene)s with controlled structures
  260. Synthesis of porphyrin-PPV copolymers for applications in LEDs
  261. Workfunction of purified and oxidised carbon nanotubes
  262. Improved operational stability of polyfluorene-based organic light-emitting diodes with plasma-treated indium–tin–oxide anodes
  263. Characterisation of the properties of surface-treated indium-tin oxide thin films
  264. Chemical and electronic structure of a novel conjugated polymer: poly(4,4′-diphenylene diphenylvinylene)
  265. The influence of polymerization conditions on the properties of poly(4,4′-dialkyl-2,2′-bithiophenes)
  266. On the influence of regioregularity on electronic and optical properties of poly(alkylthiophenes)
  267. Conjugated and electroluminescent polymers
  268. Luminescence properties of poly(p-phenylenevinylene): Role of the conversion temperature on the photoluminescence and electroluminescence efficiencies
  269. Characterisation of the physico-chemical properties of surface-treated indium tin oxide anodes for organic light-emitting diodes
  270. Holographic nanopatterning of the organic semiconductor poly(p-phenylene vinylene)
  271. New organic and polymeric materials for thin-film luminescent devices
  272. Indium–tin oxide treatments for single- and double-layer polymeric light-emitting diodes: The relation between the anode physical, chemical, and morphological properties and the device performance
  273. Efficient photo and electroluminescence of regioregular poly(alkylthiophene)s
  274. Naphthalimide side-chain polymers for organic light-emitting diodes: Band-offset engineering and role of polymer thickness
  275. A study of the ITO-on-PPV interface using photoelectron spectroscopy
  276. High finesse organic microcavities
  277. Interference phenomena in polymer light-emitting diodes: photoluminescence and modelling
  278. Naphthalimide polymers for organic light-emitting diodes
  279. Interference effects in polymer light-emitting diodes
  280. Light-emitting diodes with naphtalimide side-chain polymers: basic properties and role of polymer thickness in two-layer devices
  281. Ultrafast study of spontaneous emission from conjugated polymer microcavities
  282. Recent developments in the controlled synthesis and manipulation of electroactive organic polymers
  283. Blue Light Emitting Diodes based on a partially conjugated Si-containing PPV-copolymer in a multilayer configuration
  284. Efficient blue LEDs from a partially conjugated Si-containing PPV copolymer in a double-layer configuration
  285. A blue light emitting copolymer with charge transporting and photo-crosslinkable functional units
  286. Efficient green light emitting diodes from a phenylated derivative of poly(p-Phenylene-Vinylene)
  287. Light-Emitting Conjugated Polymers in Optical Microcavities
  288. New CF3-substituted PPV-type oligomers and polymers for use as hole blocking layers in LEDs
  289. Precursor route chemistry and optoelectronic properties of poly(pyridine vinylene)
  290. New Luminescent PPV Derivatives for Led Applications
  291. Efficient green light‐emitting diodes from a phenylated derivative of poly(p‐phenylene–vinylene)
  292. Emission enhancement in single‐layer conjugated polymer microcavities
  293. Site‐selective chemical‐vapor‐deposition of submicron‐wide conducting polypyrrole films: Morphological investigations with the scanning electron and the atomic force microscope
  294. Light-emitting and photoconductive diodes fabricated with conjugated polymers
  295. Electrical and luminescent properties of double-layer oligomeric/ polymeric light-emitting diodes
  296. Light-emitting diodes fabricated with conjugated polymers
  297. Novel poly(arylene vinylene)s carrying donor and acceptor substituents
  298. Optical mode structure in a single-layer polymer microcavity
  299. The synthesis, optical and charge transport properties of poly(aromatic oxadiazole)s
  300. Using Microcavities to Manipulate Luminescence in Conjugated Polymers
  301. Light-emitting diodes based on poly(methacrylates) with distyrylbenzene and oxadiazole side chains
  302. Charge transport polymers for light emitting diodes
  303. Synthesis and optoelectronic properties of aromatic oxadiazole polymers
  304. The Synthesis And Optoelectronic Properties Of Oxadiazole-Based Polymers
  305. Characterization of properties of polymeric light-emitting diodes over extended periods
  306. Synthesis of a polyphenylene light-emitting polymer
  307. Low‐frequency resistance fluctuation measurements on conducting polymer thin‐film resistors
  308. Gas and vapour effects on the resistance fluctuation spectra of conducting polymer thin-film resistors
  309. Cyano-Derivatives Of Poly (P-Phenylene Vinylene) For Use In Thin-Film Light-Emitting Diodes
  310. Sensing properties of polypyrrole-polytetrafluoroethylene composite thin films from granular metal-polymer precursors