All Stories

  1. Sequential deposition enables suppression of spontaneous donor enrichment of the surface in spin-coated films
  2. Multiscale modeling of structural disorder and environmental effects on the ground and excited states properties of a conjugated donor–acceptor polymer in the bulk phase
  3. Role of the Solvent on the Orientation of Y-Type Acceptor Molecules in Spin-Coated Films
  4. AFM-IR Spectromicroscopy Unveils Hidden Phase Separation in Polymer–Polymer Blend Films for Photovoltaic Applications
  5. Impact of photoinduced phase segregation in mixed-halide perovskite absorbers on their material and device stability
  6. Effect of molecular structure on the photochemical stability of acceptor and donor polymers used in organic solar cells
  7. Toward Efficient and Fully Scalable Sputtered NiOx‐Based Inverted Perovskite Solar Modules via Co‐Ordinated Modification Strategies
  8. Experimental and Theoretical Investigation of Gadolinium Oxyhydride (GdHO) Thin Films: Optical, Photocatalytic, and Electronic Properties
  9. Hexanary blends: a strategy towards thermally stable organic photovoltaics
  10. Minimizing the Interface-Driven Losses in Inverted Perovskite Solar Cells and Modules
  11. A mesoscopic lattice model for morphology formation in ternary mixtures with evaporation
  12. In Situ Study the Dynamics of Blade‐Coated All‐Polymer Bulk Heterojunction Formation and Impact on Photovoltaic Performance of Solar Cells
  13. Donor–acceptor polymer complex formation in solution confirmed by spectroscopy and atomic-scale modelling
  14. In Situ Optical Spectroscopy Demonstrates the Effect of Solvent Additive in the Formation of All-Polymer Solar Cells
  15. Photocatalytic self-cleaning properties of thin films of photochromic yttrium oxyhydride
  16. Quantitative analysis of phase formation and growth in ternary mixtures upon evaporation of one component
  17. An Integrated Bulk and Surface Modification Strategy for Gas‐Quenched Inverted Perovskite Solar Cells with Efficiencies Exceeding 22%
  18. Electrically Switchable Film Structure of Conjugated Polymer Composites
  19. Photooxidation of PC60BM: new insights from spectroscopy
  20. Intrinsic Organic Semiconductors as Hole Transport Layers in p–i–n Perovskite Solar Cells
  21. In Situ Optical Studies on Morphology Formation in Organic Photovoltaic Blends
  22. High-performance all-polymer solar cells enabled by a novel low bandgap non-fully conjugated polymer acceptor
  23. Efficient Wide-Bandgap Mixed-Cation and Mixed-Halide Perovskite Solar Cells by Vacuum Deposition
  24. Nonconjugated Terpolymer Acceptors with Two Different Fused-Ring Electron-Deficient Building Blocks for Efficient All-Polymer Solar Cells
  25. Suppressing Co‐Crystallization of Halogenated Non‐Fullerene Acceptors for Thermally Stable Ternary Solar Cells
  26. Over 14% efficiency all-polymer solar cells enabled by a low bandgap polymer acceptor with low energy loss and efficient charge separation
  27. Fine regulation of crystallisation tendency to optimize the BHJ nanostructure and performance of polymer solar cells
  28. Photo-Oxidation Reveals H-Aggregates Hidden in Spin-Cast-Conjugated Polymer Films as Observed by Two-Dimensional Polarization Imaging
  29. Initial photo-degradation of PCDTBT:PC70BM solar cells studied under various illumination conditions: Role of the hole transport layer
  30. A lattice model approach to the morphology formation from ternary mixtures during the evaporation of one component
  31. Unravelling donor–acceptor film morphology formation for environmentally-friendly OPV ink formulations
  32. Impact of intentional photo-oxidation of a donor polymer and PC70BM on solar cell performance
  33. Fullerene Aggregation in Thin Films of Polymer Blends for Solar Cell Applications
  34. Engineering Two-Phase and Three-Phase Microstructures from Water-Based Dispersions of Nanoparticles for Eco-Friendly Polymer Solar Cell Applications
  35. Stability of organic solar cells with PCDTBT donor polymer: An interlaboratory study – ERRATUM
  36. Photo-degradation in air of spin-coated PC60BM and PC70BM films
  37. Stability of organic solar cells with PCDTBT donor polymer: An interlaboratory study
  38. Morphology in dip-coated blend films for photovoltaics studied by UV/VIS absorption and fluorescence spectroscopy
  39. Light-induced degradation of fullerenes in organic solar cells: a case study on TQ1:PC71BM
  40. The influence of moisture content on the polymer structure of polyvinyl alcohol in dispersion barrier coatings and its effect on the mass transport of oxygen
  41. Brodie vs Hummers graphite oxides for preparation of multi-layered materials
  42. Low temperature processed NiO x hole transport layers for efficient polymer solar cells
  43. Scanning tunneling microscopy study of thin PTCDI films on Ag/Si(111)-√3 × √3
  44. Opportunities and challenges in probing local composition of organic material blends for photovoltaics
  45. Modeling of oxygen permeation through filled polymeric layers for barrier coatings
  46. Efficient ternary organic solar cells based on immiscible blends
  47. Comparing morphology in dip-coated and spin-coated polyfluorene:fullerene films
  48. The influence of clay orientation and crystallinity on oxygen permeation in dispersion barrier coatings
  49. Photodegradation of the electronic structure of PCBM and C60 films in air
  50. Organic heterojunctions: Contact-induced molecular reorientation, interface states and charge re-distribution
  51. Photo-degradation in air of the active layer components in a thiophene–quinoxaline copolymer:fullerene solar cell
  52. Two-in-one: cathode modification and improved solar cell blend stability through addition of modified fullerenes
  53. Fluorescence spectroscopy studies on polymer blend solutions and films for photovoltaics
  54. Fluorescence and UV/VIS absorption spectroscopy studies on polymer blend films for photovoltaics
  55. The influence of oxygen adsorption on the NEXAFS and core-level XPS spectra of the C60 derivative PCBM
  56. Vertical and lateral morphology effects on solar cell performance for a thiophene–quinoxaline copolymer:PC70BM blend
  57. Solvent vapor annealing on perylene-based organic solar cells
  58. V oc from a Morphology Point of View: the Influence of Molecular Orientation on the Open Circuit Voltage of Organic Planar Heterojunction Solar Cells
  59. Simulation of Surface-Directed Phase Separation in a Solution-Processed Polymer/PCBM Blend
  60. Pattern replication in blends of semiconducting and insulating polymers casted by horizontal dipping
  61. Near-edge X-ray absorption fine structure study of the C60-derivative PCBM
  62. Molecular orientation and composition at the surface of spin-coated polyfluorene:Fullerene blend films
  63. USING A DISCIPLINARY DISCOURSE LENS TO EXPLORE HOW REPRESENTATIONS AFFORD MEANING MAKING IN A TYPICAL WAVE PHYSICS COURSE
  64. Polymer blends spin-cast into films with complementary elements for electronics and biotechnology
  65. Coronene Fusion by Heat Treatment: Road to Nanographenes
  66. Tuning the Vertical Phase Separation in Polyfluorene:Fullerene Blend Films by Polymer Functionalization
  67. Phase behaviour of liquid-crystalline polymer/fullerene organic photovoltaic blends: thermal stability and miscibility
  68. Device Performance of APFO-3/PCBM Solar Cells with Controlled Morphology
  69. Molecular orientation of thiol-derivatized tetraphenylporphyrin on gold studied by XPS and NEXAFS
  70. Mixed Self-Assembled Monolayers of Ferrocene-Terminated and Unsubstituted Alkanethiols on Gold: Surface Structure and Work Function
  71. Structures in Multicomponent Polymer Films: Their Formation, Observation and Applications in Electronics and Biotechnology
  72. Ordering domains of spin cast blends of conjugated and dielectric polymers on surfaces patterned by soft- and photo-lithography
  73. Polymer vs Solvent Diagram of Film Structures Formed in Spin-Cast Poly(3-alkylthiophene) Blends
  74. A spectroscopic study of self-assembled monolayer of porphyrin-functionalized oligo(phenyleneethynylene)s on gold: the influence of the anchor moiety
  75. Morphology and Phase Segregation of Spin-Casted Films of Polyfluorene/PCBM Blends
  76. Characterization of Self-Assembled Monolayers of Oligo(phenyleneethynylene) Derivatives of Varying Shapes on Gold:  Effect of Laterally Extended π-Systems
  77. Electron spectroscopy studies of PTCDA onAg∕Si(111)−3×3
  78. Vertical phase separation in spin-coated films of a low bandgap polyfluorene/PCBM blend—Effects of specific substrate interaction
  79. Growth and characterization of thin PTCDA films on 3C-SiC(001)c(2×2)
  80. Influence of solvents and substrates on the morphology and the performance of low-bandgap polyfluorene: PCBM photovoltaic devices
  81. Influence of Solvent Mixing on the Morphology and Performance of Solar Cells Based on Polyfluorene Copolymer/Fullerene Blends
  82. Multilayer formation in spin-coated thin films of low-bandgap polyfluorene:PCBM blends
  83. Control of phase separation in blends of polyfluorene (co)polymers and the C60-derivative PCBM
  84. Preparation of stoichiometric GaN(0001)-1×1 studied with spectromicroscopy
  85. Thin PTCDA films on Si(001): 1. Growth mode
  86. Thin PTCDA films on Si(001): 2. Electronic structure
  87. Barrier-Free Electron–Hole Capture in Polymer Blend Heterojunction Light-Emitting Diodes
  88. A technique to compare polythiophene solid-state dye sensitized TiO2 solar cells to liquid junction devices
  89. Conjugated polymer blends: linking film morphology to performance of light emitting diodes and photodiodes
  90. Hybrid Inorganic−Organic Core−Shell Nanoparticles from Surface-Functionalized Titanium, Zirconium, and Vanadium Oxo Clusters
  91. Optical and morphological investigations of non-homogeneity in polyfluorene blends
  92. Erratum: “Ultraviolet–visible near-field microscopy of phase-separated blends of polyfluorene-based conjugated semiconductors” [Appl. Phys. Lett. 79, 833 (2001)]
  93. Self-Organized Discotic Liquid Crystals for High-Efficiency Organic Photovoltaics
  94. Ultraviolet–visible near-field microscopy of phase-separated blends of polyfluorene-based conjugated semiconductors
  95. New efficient light-emitting polymer diode for flat-panel display applications
  96. De-mixing of Polyfluorene-Based Blends by Contact with Acetone: Electro- and Photo-luminescence Probes
  97. Kelvin probe and ultraviolet photoemission measurements of indium tin oxide work function: a comparison
  98. Self-assembled monolayers as interfaces for organic opto-electronic devices
  99. Construction of the energy diagram of an organic semiconductor film on SnO2:F by surface photovoltage spectroscopy
  100. Determination of the energy diagram of the dithioketopyrrolopyrrole/SnO2:F heterojunction by surface photovoltage spectroscopy
  101. Surface Photovoltage of Porphyrin Layers Using the Kelvin Probe Technique
  102. Photogeneration and transport of charge carriers in a porphyrin p/n heterojunction
  103. Effect of air annealing on the electronic properties of CdSCu(In,Ga)Se2 solar cells
  104. Electron transfer in hybrid molecular solid-state devices
  105. Band diagram of the polycrystalline CdS/Cu(In,Ga)Se2 heterojunction
  106. Controlling the Work Function of CdSe by Chemisorption of Benzoic Acid Derivatives and Chemical Etching
  107. Polar Ligand Adsorption Controls Semiconductor Surface Potentials
  108. Determination of undoped CdTe(111) surface polarity by surface photovoltage spectroscopy
  109. Ohmic contacts to p-CuInSe2 crystals
  110. Molecular Approach to Surface Control of Chalcogenide Semiconductors
  111. Optimizing Thin Film Chalcogenide-Based Solar Cells via Chemical Surface Treatments