Contact

All Stories

  1. Predicting the tensile stiffness and strength properties of plain woven carbon fiber/epoxy laminates: a practical analytical approach and experimental validations

    Article • Mechanics of Advanced Materials and Structures, January 2023, Taylor & Francis

    Prof. Dr. Necdet Geren

  2. Physical and mechanical properties of laminar composites depending on the production methods: an experimental investigation

    Article • Sadhana, November 2022, Springer Science + Business Media

    Prof. Dr. Necdet Geren

  3. Automated sizing of automotive steering ball joints in parametric CAD environment using expert knowledge and feature-based computer-assisted 3D modelling

    Article • Advanced Engineering Informatics, April 2022, Elsevier

    Prof. Dr. Necdet Geren

  4. A practical approach to predict the flexural properties of woven plain carbon fiber/epoxy laminates

    Article • Mechanics of Advanced Materials and Structures, March 2022, Taylor & Francis

    Prof. Dr. Necdet Geren

  5. A method for the optimal design of low-density polymer foam core sandwiches using FEA and multiobjective optimization of design variables

    Article • Journal of Polymer Engineering, November 2021, De Gruyter

    Prof. Dr. Necdet Geren

  6. Effect of substrate surface roughness on the wear of molybdenum disulphate coated rolling contact bearings

    Article • Materials Testing, September 2021, De Gruyter

    Prof. Dr. Necdet Geren

  7. The effect of boron carbide additive on the low‐velocity impact properties of low‐density foam core composite sandwich structures

    Article • Polymer Composites, January 2021, Wiley

    Prof. Dr. Necdet Geren, Çağrı Uzay

  8. Effect of stainless-steel wire mesh embedded into fibre-reinforced polymer facings on flexural characteristics of sandwich structures

    Article • Journal of Reinforced Plastics and Composites, May 2020, SAGE Publications

    Prof. Dr. Necdet Geren

  9. A generic novel method to simplify the mechanical component design.

    Article • International Journal of Technology and Design Education, February 2020, Springer Science + Business Media

    Prof. Dr. Necdet Geren

  10. Sandwich structures with different fiber facing types and extremely low-density foam cores

    Article • Materials Testing, March 2019, Carl Hanser Verlag

    Prof. Dr. Necdet Geren

  11. Introducing gear ratings and AGMA conversion factors for the steel spur gear design under bending fatigue

    Article • Materials Testing, November 2017, Carl Hanser Verlag

    Prof. Dr. Necdet Geren, Çağrı Uzay

  12. Automotive ball joint design using knowledge and feature-based computer assisted 3D modelling

    Article • Engineering Applications of Artificial Intelligence, November 2017, Elsevier

    Prof. Dr. Necdet Geren

  13. The conflict between the education process and less knowledgeable engineering students

    Article • International Journal of Technology and Design Education, May 2017, Springer Science + Business Media

    Prof. Dr. Necdet Geren, Çağrı Uzay

  14. Effect of post-curing heat treatment of FRP composites

    Article • Materials Testing, April 2017, Carl Hanser Verlag

    Prof. Dr. Necdet Geren, Çağrı Uzay

  15. A Translation Technique: Dimensionless Ratings and Conversion Factors Between ISO and AGMA Gear Standards

    Article • November 2016, ASME International

    Prof. Dr. Necdet Geren

  16. Conceptual Design of Automated Rework cell

    Article • Soldering & Surface Mount Technology, June 2012, Emerald

    Prof. Dr. Necdet Geren

  17. Systematic design of Flexible manufacturing cells (FMCs)

    Article • Soldering & Surface Mount Technology, September 2011, Emerald

    Prof. Dr. Necdet Geren

  18. Cost and performance evaluation of different surface treated dies for hot forging process

    Article • Journal of Materials Processing Technology, August 2008, Elsevier

    Prof. Dr. Necdet Geren

  19. Statistical optimization of process parameters to obtain maximum thickness and brightness in chromium plating

    Article • Journal of Materials Processing Technology, July 2008, Elsevier

    Prof. Dr. Necdet Geren

  20. Applying reverse engineering to proto-type water jet cutting machine

    Article • Journal of Engineering Design, February 2007, Taylor & Francis

    Prof. Dr. Necdet Geren

  21. Concept generation and selection for automated and autonomous manufacturing cell

    Article • Soldering & Surface Mount Technology, January 2006, Emerald

    Prof. Dr. Necdet Geren

  22. Developing a low-cost 3500 bar WJC machine by applying reverse engineering

    Article • International Journal of Materials and Product Technology, January 2004, Inderscience Publishers

    Prof. Dr. Necdet Geren

  23. Determination and comparison of surface mount component rework cycle times of manual and fully automated robotic rework stations for rework technology selection

    Article • IEEE Transactions on Electronics Packaging Manufacturing, April 2003, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Dr. Necdet Geren

  24. Effects of welding parameters on the quality of resistance spot welded SAE 1010 steel sheet

    Article • International Journal of Materials and Product Technology, January 2003, Inderscience Publishers

    Prof. Dr. Necdet Geren

  25. Model-Based Flexible PCBA Rework Cell Design

    Article • December 2000, Taylor & Francis

    Prof. Dr. Necdet Geren

  26. Cost and performance analysis of a robotic rework cell

    Article • International Journal of Production Economics, January 1999, Elsevier

    Prof. Dr. Necdet Geren

  27. Obtaining tools and devices of a flexible manufacturing cell reworking PCBAs

    Article • Computer Integrated Manufacturing Systems, February 1998, Elsevier

    Prof. Dr. Necdet Geren

  28. Software architecture of a printed circuit board assembly (PCBA) robotic rework cell

    Article • Computer Integrated Manufacturing Systems, October 1997, Elsevier

    Prof. Dr. Necdet Geren

  29. THE LIMITS OF AUTOMATING ELECTRONIC COMPONENT REWORK

    Article • Journal of Electronics Manufacturing, September 1997, World Scientific Pub Co Pte Lt

    Prof. Dr. Necdet Geren

  30. Automated removal and replacement of through-hole components in robotic rework

    Article • IEEE Transactions on Components Packaging and Manufacturing Technology Part C, July 1997, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Dr. Necdet Geren

  31. Automated removal and replacement of surface mounted devices in electronic assembly

    Article • IEEE Transactions on Components Packaging and Manufacturing Technology Part C, July 1997, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Dr. Necdet Geren

  32. Obtaining process steps of a manufacturing cell to rework defected printed circuit board assemblies

    Article • International Journal of Computer Integrated Manufacturing, January 1996, Taylor & Francis

    Prof. Dr. Necdet Geren

  33. The Use of Infra-red for Both Heating and Measuring Surface Mount Components in Rework

    Article • Journal of Electronics Manufacturing, June 1995, World Scientific Pub Co Pte Lt

    Prof. Dr. Necdet Geren

  34. The significance of desoldering and resoldering methods in robotic automated rework

    Article • Journal of Electronics Manufacturing, March 1994, World Scientific Pub Co Pte Lt

    Prof. Dr. Necdet Geren

  35. Solder Paste Dispensing in Robotic SMD Rework

    Article • Soldering & Surface Mount Technology, January 1994, Emerald

    Prof. Dr. Necdet Geren

  36. Computer‐Integrated Automatic PCBA Rework

    Article • Integrated Manufacturing Systems, April 1992, Emerald

    Prof. Dr. Necdet Geren