All Stories

  1. Innovative Solutions for Drought: Evaluating Hydrogel Application on Onion Cultivation (Allium cepa) in Morocco
  2. Valorization of Cassava By-Products: Cyanide Content and Quality Characteristics of Leaves and Peel
  3. New Sustainable Banana Value Chain: Waste Valuation toward a Circular Bioeconomy
  4. Effect of Operational Parameters of Unmanned Aerial Vehicle (UAV) on Droplet Deposition in Trellised Pear Orchard
  5. Pretreatment of the Leaves of Ethiopian Cassava (Manihot esculenta Crantz) Varieties: Effect of Blanching on the Quality of Dried Cassava Leaves
  6. Influence of Self-Compaction on the Airflow Resistance of Aerated Wheat Bulks (Triticum aestivum L., cv. ‘Pionier’)
  7. Determining the heat of desorption for cassava products based on data measured by an automated gravimetric moisture sorption system
  8. Occurrence of mycotoxins in pulses
  9. Hydrothermal Treatment of Residual Forest Wood (Softwood) and Digestate from Anaerobic Digestion—Influence of Temperature and Holding Time on the Characteristics of the Solid and Liquid Products
  10. High-Precision Laboratory Dryer for Characterization of the Drying Behavior of Agricultural and Food Products
  11. Application of Infrared Imaging for Early Detection of Downy Mildew (Plasmopara viticola) in Grapevine
  12. Remote Sensing of Maize Plant Height at Different Growth Stages Using UAV-Based Digital Surface Models (DSM)
  13. Drying Behavior and Curcuminoids Changes in Turmeric Slices during Drying under Simulated Solar Radiation as Influenced by Different Transparent Cover Materials
  14. Catalase Activity in Hot-Air Dried Mango as an Indicator of Heat Exposure for Rapid Detection of Heat Stress
  15. Maize Characteristics Estimation and Classification by Spectral Data under Two Soil Phosphorus Levels
  16. Characteristics and Anaerobic Co-Digestion of Press Water from Wood Fuel Preparation and Digested Sewage Sludge
  17. Influence of Temperature and Screw Pressing on the Quality of Cassava Leaf Fractions
  18. Dataset for a full-year time series characterization of separately collected organic fraction of municipal solid waste from rural and urban regions in Germany
  19. Lab-Scale Carbonation of Wood Ash for CO2-Sequestration
  20. Drying Kinetics of Wheat (Triticum aestivum L., cv. ‘Pionier’) during Thin-Layer Drying at Low Temperatures
  21. Performance Evaluation of an Inflatable Solar Dryer for Maize and the Effect on Product Quality Compared with Direct Sun Drying
  22. Effect of Hot-Air Convective Drying on Activity Retention of Amylase and Invertase in Dried Mango of Varieties Sindri, SB Chaunsa, and Tommy Atkins
  23. Partitioning of Proteins and Anti-Nutrients in Cassava (Manihot esculenta Crantz) Leaf Processing Fractions after Mechanical Extraction and Ultrafiltration
  24. Upgrading the Organic Fraction of Municipal Solid Waste by Low Temperature Hydrothermal Processes
  25. Comparison of Biological Efficiency Assessment Methods and Their Application to Full-Scale Biogas Plants
  26. CFD-Simulink Modeling of the Inflatable Solar Dryer for Drying Paddy Rice
  27. Influence of Digester Temperature on Methane Yield of Organic Fraction of Municipal Solid Waste (OFMSW)
  28. Operating Performance of Full-Scale Agricultural Biogas Plants in Germany and China: Results of a Year-Round Monitoring Program
  29. Effect of Heat Exposure on Activity Degradation of Enzymes in Mango Varieties Sindri, SB Chaunsa, and Tommy Atkins during Drying
  30. Comparative Study between Current Practices on Cassava Drying by Small-Size Enterprises in Africa
  31. Fruit Spirit Production from Coffee Cherries—Process Analysis and Sensory Evaluation
  32. Datasets on chemical composition and anaerobic digestion of organic fraction of municipal solid waste (OFMSW), digested sewage sludge (inoculum) and ashes from incineration or gasification
  33. Review of solar dryers for agricultural products in Asia and Africa: An innovation landscape approach
  34. Influence of Surface Reflection (Albedo) in Simulating the Sun Drying of Paddy Rice
  35. Drying Performance and Aflatoxin Content of Paddy Rice Applying an Inflatable Solar Dryer in Burkina Faso
  36. Optimizing anaerobic digestion of organic fraction of municipal solid waste (OFMSW) by using biomass ashes as additives
  37. Potential of Biogas Production from Processing Residues to Reduce Environmental Impacts from Cassava Starch and Crisp Production—A Case Study from Malaysia
  38. Nutrient Loaded Biochar Doubled Biomass Production in Juvenile Maize Plants (Zea mays L.)
  39. Biomethane Potential Test: Influence of Inoculum and the Digestion System
  40. CFD assisted investigation of mechanical juice extraction from cassava leaves and characterization of the products
  41. Influence of packaging materials, oxygen and storage temperature on quality of germinated parboiled rice
  42. Influence of Anaerobic Digestion Processes on the Germination of Weed Seeds
  43. Temporal changes in the spatial distribution of physicochemical properties during postharvest ripening of mango fruit
  44. Enzyme-Assisted Mechanical Peeling of Cassava Tubers
  45. Preparation, optimization and characterization of foam from white-flesh and yellow-flesh cassava (Manihot esculenta) for powder production
  46. Technical Performance of an Inflatable Solar Dryer for Drying Amaranth Leaves in Kenya
  47. Freeze–Thaw Pre-Treatment of Cassava Tubers to Improve Efficiency of Mechanical Peeling
  48. Early Detection of Zymoseptoria tritici in Winter Wheat by Infrared Thermography
  49. Enzymatic hydrolysis of cassava peels as potential pre-treatment for peeling of cassava tubers
  50. Osmotic dehydration kinetics of biofortified yellow-flesh cassava in contrast to white-flesh cassava (Manihot esculenta)
  51. Detoxification of Cassava Leaves by Thermal, Sodium Bicarbonate, Enzymatic, and Ultrasonic Treatments
  52. Environmental Assessment of a Bio-Refinery Concept Comprising Biogas Production, Lactic Acid Extraction and Plant Nutrient Recovery
  53. Physical Properties of Jatropha curcas L. Fruits and Seeds with Respect to Their Maturity Stage
  54. Physico-mechanical properties and thermal decomposition characteristics of pellets from Jatropha curcas L. residues as affected by water addition
  55. Drying Characteristics of Biogas Digestate in a Hybrid Waste-Heat/Solar Dryer
  56. Short-Term Nitrogen Uptake of Barley from Differently Processed Biogas Digestate in Pot Experiments
  57. Temperature influence on chemical properties of jatropha curcas L. oil extracted with mechanical screw press
  58. Introducing Temperature as Variable Parameter into Kinetic Models for Anaerobic Fermentation of Coffee Husk, Pulp and Mucilage
  59. Mass estimation of mango fruits (Mangifera indica L., cv. ‘Nam Dokmai’) by linking image processing and artificial neural network
  60. Phytotoxicity of Corncob Biochar before and after Heat Treatment and Washing
  61. Acquisition of Sorption and Drying Data with Embedded Devices: Improving Standard Models for High Oleic Sunflower Seeds by Continuous Measurements in Dynamic Systems
  62. Gas-releasing potential of biogas digestate
  63. Characterisation of biochar from maize residues produced in a self-purging pyrolysis reactor
  64. Influence of drying conditions on colour, betacyanin content and antioxidant capacities in dried red-fleshed dragon fruit (Hylocereus polyrhizus )
  65. Comparing Characteristics of Root, Flour and Starch of Biofortified Yellow-Flesh and White-Flesh Cassava Variants, and Sustainability Considerations: A Review
  66. Enzyme-Assisted Aqueous Oil Extraction from High Oleic Sunflower Seeds in a Scalable Prototype Reactor
  67. Biogas Potential of Coffee Processing Waste in Ethiopia
  68. Combustion performance of Jatropha curcas L. residues in a biomass burner with continuous feeding system
  69. bio-methane from coffee husk and pulp, trace element supplement effects
  70. On-farm milk cooling solution based on insulated cans with integrated ice compartment
  71. Changes in microstructure and functional properties of papaya as affected by osmotic pre-treatment combined with freeze-drying
  72. Biogas digestate is emitting ammonia and methane during drying
  73. High-Throughput Precision Phenotyping of the Oil Content of Single Seeds of Various Oilseed Crops
  74. Potential for Sensor Systems to Monitor Fruit Physiology of Mango during Long-Distance Transport
  75. Modelling and Simulation of a PV Driven Refrigerator with Phase-Change Materials in the Internal Walls
  76. Class-based physical properties of air-classified sunflower seeds and kernels
  77. Automated measurement of oil content of single seeds for rapid phenotyping in oil seed breeding
  78. Life cycle assessment (LCA) of biogas versus dung combustion household cooking systems in developing countries – A case study in Ethiopia
  79. Blending Jatropha with cereals improves oil recovery and press-cake quality
  80. Temperature stability of vitamin D2 and color changes during drying of UVB-treated mushrooms
  81. Computer vision coupled with laser backscattering for non-destructive colour evaluation of papaya during drying
  82. Prediction mapping of physicochemical properties in mango by hyperspectral imaging
  83. Innovative technologies to manage aflatoxins in foods and feeds and the profitability of application – A review
  84. Discrete element method simulation of the hulling process of Jatropha curcas L. fruits
  85. Mycotoxins in Sub-Saharan Africa: Present situation, socio-economic impact, awareness, and outlook
  86. Assessment of a Solar Powered Refrigerator Equipped with Thermal Storage for a Dairy Application
  87. Regulated deficit irrigation and partial root-zone drying irrigation impact bioactive compounds and antioxidant activity in two select tomato cultivars
  88. Design and performance of a small-scale solar ice-maker based on a DC-freezer and an adaptive control unit
  89. Multi-sensor approach to improve optical monitoring of papaya shrinkage during drying
  90. Improved energy performance of small-scale pneumatic dryers used for processing cassava in Africa
  91. Vitamin D2 enrichment in mushrooms by natural or artificial UV-light during drying
  92. Effect of self-purging pyrolysis on yield of biochar from maize cobs, husks and leaves
  93. Allicin and total phenolic content and antioxidant activity in conventional and organic garlic
  94. Effect of drying methods on anti-oxidative potential of garlic (Allium sativum L.)
  95. Physical Properties of Cassava Grits before and after Pneumatic Drying
  96. Compositional and functional dynamics of dried papaya as affected by storage time and packaging material
  97. Two-parameter Lorentzian distribution for monitoring physical parameters of golden colored fruits during drying by application of laser light in the Vis/NIR spectrum
  98. Robust NIRS models for non-destructive prediction of postharvest fruit ripeness and quality in mango
  99. NARX Neural Network Modelling of Mushroom Dynamic Vapour Sorption Kinetics
  100. Potential for Automated Systems to Monitor Drying of Agricultural Products Using Optical Scattering
  101. Influence of Water Supply on CO2 Concentration in the Rootzone of Split-Root Potted Longan Trees
  102. Influence of physical properties of Jatropha curcas L. seeds on shelling performance using a modified disc mill
  103. Performance characterisation of a small milk cooling system with ice storage for PV applications
  104. Single layer drying kinetics of papaya amidst vertical and horizontal airflow
  105. Phenolic Compounds, Antioxidant Activity, and Medium Chain Fatty Acids Profiles of Coconut Water and Meat at Different Maturity Stages
  106. Tunnel Dryer and Pneumatic Dryer Performance Evaluation to Improve Small-Scale Cassava Processing in Tanzania
  107. Potential of cassava leaves in human nutrition: A review
  108. Sorption behaviour of papayas as affected by compositional and structural alterations from osmotic pretreatment and drying
  109. Water Use Efficiency in Saline Soils under Cotton Cultivation in the Tarim River Basin
  110. Development and assessment of different modeling approaches for size-mass estimation of mango fruits (Mangifera indica L., cv. ‘Nam Dokmai’)
  111. Non-destructive determination of β-carotene content in mango by near-infrared spectroscopy compared with colorimetric measurements
  112. Influence of air drying properties on non-enzymatic browning, major bio-active compounds and antioxidant capacity of osmotically pretreated papaya
  113. EFFECTS OF PARTIAL ROOTZONE DRYING IRRIGATION ON PROLINE CONTENT AND YIELD OF MANGO IN A COMMERCIAL ORCHARD
  114. Effect of Dust Deposition on Stomatal Conductance and Leaf Temperature of Cotton in Northwest China
  115. Modeling and Simulation of Deep-Bed Solar Greenhouse Drying of Chamomile Flowers
  116. Batch uniformity and energy efficiency improvements on a cabinet dryer suitable for smallholder farmers
  117. Laser-based imaging system for non-invasive monitoring of quality changes of papaya during drying
  118. Effect of convective-, vacuum- and freeze drying on sorption behaviour and bioactive compounds of lemon balm (Melissa officinalis L.)
  119. Solar Drying
  120. Quantifying greenhouse gases from the production, transportation and utilization of charcoal in developing countries: a case study of Kampala, Uganda
  121. Modelling the relationship between peel colour and the quality of fresh mango fruit using Random Forests
  122. Kinetics of change in colour and rosmarinic acid equivalents during convective drying of lemon balm (Melissa officinalis L.)
  123. Effect of container depth and sedimentation time on quality of Jatropha curcas L. oil
  124. Framework for participatory food security research in rural food value chains
  125. Changes of essential oil content and composition during convective drying of lemon balm (Melissa officinalis L.)
  126. Effects of calcium chloride and calcium lactate applications with osmotic pretreatment on physicochemical aspects and consumer acceptances of dried papaya
  127. Solar Drying
  128. Mango (Mangifera indica L. cv. Nam Dokmai) production in Northern Thailand—Costs and returns under extreme weather conditions and different irrigation treatments
  129. Improved energy efficiency of farmers' cooperative litchi drying operation in Northern Thailand
  130. Improving the airflow distribution in a multi-belt conveyor dryer for spice plants by modifications based on computational fluid dynamics
  131. Suitability of Jatropha seed shells as fuel for small-scale combustion units
  132. BreedVision — A Multi-Sensor Platform for Non-Destructive Field-Based Phenotyping in Plant Breeding
  133. CO2 abatement costs of greenhouse gas (GHG) mitigation by different biogas conversion pathways
  134. Random Forests Model predicts fruit yield of mango
  135. Household energy economics in rural Ethiopia: A cost-benefit analysis of biogas energy
  136. Parameterization of Threshold Accepting: The Case of Economic Capital Allocation
  137. Infrared Thermal Imaging as a Rapid Tool for Identifying Water-Stress Tolerant Maize Genotypes of Different Phenology
  138. Life cycle assessment of energy generation from biogas—Attributional vs. consequential approach
  139. Moisture sorption isotherms and isosteric heat of sorption of leaves and stems of lemon balm (Melissa officinalis L.) established by dynamic vapor sorption
  140. Ammonia (NH3) emissions during drying of untreated and dewatered biogas digestate in a hybrid waste-heat/solar dryer
  141. Life cycle assessment of energy generation of biogas fed combined heat and power plants: Environmental impact of different agricultural substrates
  142. Combination of digital images and laser light to predict moisture content and color of bell pepper simultaneously during drying
  143. Solar Drying
  144. Allocation of Economic Capital in Banking: A Simulation Approach
  145. Effect of Air Temperature and Pre-treatment on Color Changes and Texture of DriedBoletus edulisMushroom
  146. Tenacity, Fineness and Ultimate Fiber Recovery of Abaca Fiber Strands
  147. Life cycle assessment of biogas digestate processing technologies
  148. Modeling of desorption of Alfalfa (Medicago sativa) stems and leaves
  149. Use of thermography for high throughput phenotyping of tropical maize adaptation in water stress
  150. Experimental and Simulated Performances of a Batch-Type Longan Dryer with Air Flow Reversal Using Biomass Burner as a Heat Source
  151. Autonomous navigation using a robot platform in a sugar beet field
  152. Optimizing mechanical oil extraction of Jatropha curcas L. seeds with respect to press capacity, oil recovery and energy efficiency
  153. Thin-layer drying of litchi (Litchi chinensis Sonn.)
  154. Laser light backscattering to monitor moisture content, soluble solid content and hardness of apple tissue during drying
  155. Response to the comments by J.C. Jones on ‘fruit processing residues as an alternative fuel for drying in Northern Thailand’
  156. Skyfarming an ecological innovation to enhance global food security
  157. BIOMASS FORMATION AND NUTRIENT PARTITIONING IN POTTED LONGAN TREES UNDER PARTIAL ROOTZONE DRYING
  158. Analysis of dryer performance for the improvement of small-scale litchi processing
  159. Fruit processing residues as an alternative fuel for drying in Northern Thailand
  160. Assessment of convection, hot-air combined with microwave-vacuum and freeze-drying methods for mushrooms with regard to product quality
  161. Equilibrium moisture contents of a medicinal herb (Melissa officinalis) and a medicinal mushroom (Lentinula edodes) determined by dynamic vapour sorption
  162. An innovative laser-based optical technology to predict moisture content and color of Bell pepper (Capsicum annuum L.) during drying
  163. Estimating the mass of mango fruit (Mangifera indica, cv. Chok Anan) from its geometric dimensions by optical measurement
  164. Thin Layer Drying of Peeled Longan (Dimocarpus longan Lour.)
  165. Effect of Convective Drying on Quality of Lemon Balm (Melissa Officinalis L.)
  166. Influence of phosphorus content of coconut oil on deposit and performance of plant oil pressure stoves
  167. Prediction of deposit formation during combustion of Jatropha oil from standard quality parameters
  168. Applicability of biogas digestate as solid fuel
  169. Determination of physical, mechanical and chemical properties of seeds and kernels of Jatropha curcas L.
  170. Improved quality and energy performance of a fixed-bed longan dryer by thermodynamic modifications
  171. Volatile organic compounds as a diagnostic marker of late blight infected potato plants: A pilot study
  172. Effect of irrigation on near-infrared (NIR) based prediction of mango maturity
  173. Influence of free fatty acid content of coconut oil on deposit and performance of plant oil pressure stoves
  174. A path following algorithm for mobile robots
  175. Modeling of the equilibrium moisture content (EMC) of Miscanthus (Miscanthus×giganteus)
  176. Systematic design of an autonomous platform for robotic weeding
  177. Measurement and Modeling of Moisture Sorption Isotherm of Litchi (Litchi Chinensis Sonn.)
  178. 3D path planning for a biomass processing robot via motion simulation
  179. Analysis of biomass residues potential for electrical energy generation in Albania
  180. Computer-aided strategic optimisation of a robot for biomass processing
  181. Diffusivity, shrinkage and simulated drying of litchi fruit (Litchi Chinensis Sonn.)
  182. Influence of calcium and magnesium content of coconut oil on deposit and performance of plant oil pressure stoves
  183. Effect of Drying on the Color of Tarragon (Artemisia dracunculus L.) Leaves
  184. Effect of fatty acid composition of soybean oil on deposit and performance of plant oil pressure stoves
  185. Experimental and simulated performance of a PV-ventilated solar greenhouse dryer for drying of peeled longan and banana
  186. Potential of roof-integrated solar collectors for preheating air at drying facilities in Northern Thailand
  187. ECONOMIC EVALUATION OF DIFFERENT IRRIGATION REGIMES IN MANGO PRODUCTION IN NORTHERN THAILAND
  188. Neural network modeling of sorption isotherms of longan (Dimocarpus longan Lour.)
  189. Effects of pretreatments on colour alterations of litchi during drying and storage
  190. Yield and fruit development in mango (Mangifera indica L. cv. Chok Anan) under different irrigation regimes
  191. EFFECT OF DEFICIT IRRIGATION ON FRUIT GROWTH AND YIELD OF MANGO (MANGIFERA INDICA L.) IN NORTHERN THAILAND
  192. Solar Drying of Peeled Longan Using a Side Loading Type Solar Tunnel Dryer: Experimental and Simulated Performance
  193. Modeling of thin layer drying of tarragon (Artemisia dracunculus L.)
  194. Effects of operating practices on performance of a fixed-bed convection dryer and quality of dried longan
  195. Finite Element Simulation of Drying of Longan Fruit
  196. Finite element simulation of drying of mango
  197. A vision based row detection system for sugar beet
  198. Colour based detection of volunteer potatoes as weeds in sugar beet fields using machine vision
  199. DRYING OF MEDICINAL PLANTS
  200. Convective drying of medicinal, aromatic and spice plants: a review
  201. Microwave drying of medicinal and aromatic plants
  202. Moisture Diffusivity Determination of Different Parts of Longan Fruit
  203. Development of A Segmented - Screw Type Expeller for Production of Virgin Coconut Oil
  204. Effect of regulated deficit irrigation and partial rootzone drying on the quality of mango fruits (Mangifera indica L., cv. ‘Chok Anan’)
  205. Long-term effects of drying conditions on the essential oil and color of tarragon leaves during storage
  206. Equilibrium Moisture Content and Heat of Sorption of Longan (Dimocarpus longanLour.)
  207. Assessment of the Behaviour of Potatoes in a Cup-belt Planter
  208. Laboratory measurement of seed drill seed spacing and velocity of fall of seeds using high-speed camera system
  209. Loss of essential oil of tarragon (Artemisia dracunculus L.) due to drying
  210. Quality change and mass loss of paddy during airtight storage in a ferro-cement bin in Sri Lanka
  211. An Autonomous Weeding Robot for Organic Farming
  212. Modeling of the Equilibrium Moisture Content (EMC) of Tarragon (Artemisia Dracunculus L.)
  213. Development of a greenhouse-type solar dryer for medicinal plants and herbs
  214. Development of a multi-purpose solar crop dryer for arid zones
  215. Development of an air-conditioning system for greenhouses in hot and dry climates
  216. Drying of Medicinal Plants
  217. An Autonomous Weeding Robot for Organic Farming