All Stories

  1. Chemical strengthening of float glasses: Effect of composition and structure

    Article • Journal of the American Ceramic Society, October 2025, Wiley

    prof vincenzo m sglavo

  2. The Support can Disguise the Catalytic Effect: The Case of Silver on Alumina in Plasma Ammonia Synthesis

    Article • ChemSusChem, May 2025, Wiley

    prof vincenzo m sglavo, Dr Paolo Fornasiero

  3. Selective Alkali Activation of Limestone for Additive Manufacturing in Construction: Influence of Alkali Concentration on Physical and Mechanical Properties

    Article • Applied Sciences, April 2025, MDPI AG

    prof vincenzo m sglavo

  4. Pressureless joining of soda lime silicate glass using polysilazane-derived silica at near-room temperature

    Article • Ceramics International, February 2025, Elsevier

    prof vincenzo m sglavo

  5. Flash sintering of metal-like ceramics: A short overview

    Article • Ceramics International, October 2024, Elsevier

    prof vincenzo m sglavo

  6. Additive manufacturing of geopolymer composites for sustainable construction: critical factors, advancements, challenges, and future directions

    Article • Progress in Additive Manufacturing, August 2024, Springer Science + Business Media

    prof vincenzo m sglavo, Dr. Faiz Uddin Ahmed Shaikh

  7. From rapid prototyping to rapid firing: on the feasibility of high‐speed production for complex BaTiO3 components

    Article • Journal of the American Ceramic Society, June 2024, Wiley

    prof vincenzo m sglavo

  8. Joining and Coating of Plasma Electrolytic Oxidated Aluminum Using a Silica Preceramic Polymer

    Article • Coatings, June 2024, MDPI AG

    prof vincenzo m sglavo

  9. Binder Jetting 3D Printing of Binary Cement—Siliceous Sand Mixture

    Article • Materials, March 2024, MDPI AG

    prof vincenzo m sglavo

  10. Apatite/Chitosan Composites Formed by Cold Sintering for Drug Delivery and Bone Tissue Engineering Applications

    Article • Nanomaterials, February 2024, MDPI AG

    prof vincenzo m sglavo

  11. Mo-Doped LSCF as a Novel Coke-Resistant Anode for Biofuel-Fed SOFC

    Article • Materials, February 2024, MDPI AG

    prof vincenzo m sglavo

  12. Influence of drying conditions and plasticizer‐to‐binder ratio on the water‐based tape casting of La0.6Sr0.4Co0.2Fe0.8O3−δ

    Article • International Journal of Applied Ceramic Technology, January 2024, Wiley

    prof vincenzo m sglavo

  13. Does flash sintering alter the deformation mechanisms of tungsten carbide?

    Article • Acta Materialia, October 2023, Elsevier

    prof vincenzo m sglavo

  14. Binder Jetting 3D Printing of Magnesium Oxychloride Cement-Based Materials: Parametric Analysis of Manufacturing Factors

    Article • Journal of Manufacturing and Materials Processing, August 2022, MDPI AG

    prof vincenzo m sglavo

  15. Powder 3D Printing of Bone Scaffolds with Uniform and Gradient Pore Sizes Using Cuttlebone-Derived Calcium Phosphate and Glass-Ceramic

    Article • Materials, July 2022, MDPI AG

    prof vincenzo m sglavo

  16. Role of Surface Carbon Nanolayer on the Activation of Flash Sintering in Tungsten Carbide

    Article • January 2022, Elsevier

    prof vincenzo m sglavo

  17. Controlling the Thermal Stability of Kyanite-Based Refractory Geopolymers

    Article • Materials, May 2021, MDPI AG

    prof vincenzo m sglavo

  18. Cold sintering of diatomaceous earth

    Article • Journal of the American Ceramic Society, May 2021, Wiley

    prof vincenzo m sglavo

  19. Athermal electric field effects in flash sintered zirconia

    Article • Advances in Applied Ceramics Structural Functional and Bioceramics, May 2021, SAGE Publications

    prof vincenzo m sglavo

  20. Electrode Material Effect on the Flash Ignition in Soda-Lime Silicate Glass

    Article • Ceramics, February 2021, MDPI AG

    prof vincenzo m sglavo

  21. Flash Sintering of YSZ/Al2O3 Composites: Effect of Processing and Testing Conditions

    Article • Materials, February 2021, MDPI AG

    prof vincenzo m sglavo

  22. Nano-Hydroxyapatite Derived from Biogenic and Bioinspired Calcium Carbonates: Synthesis and In Vitro Bioactivity

    Article • Nanomaterials, January 2021, MDPI AG

    prof vincenzo m sglavo

  23. Sodium-caesium electric field assisted ion exchange in a mixed-alkali (Na, K) lime silicate glass

    Article • Journal of Non-Crystalline Solids, December 2020, Elsevier

    prof vincenzo m sglavo

  24. Beyond flash sintering: How the flash event could change ceramics and glass processing

    Article • Scripta Materialia, October 2020, Elsevier

    prof vincenzo m sglavo

  25. Electrode-dependent Joule heating in soda lime silicate glass during flash processes

    Article • Scripta Materialia, June 2020, Elsevier

    prof vincenzo m sglavo

  26. Electric forces effect on field-assisted sintering

    Article • Journal of the European Ceramic Society, June 2020, Elsevier

    prof vincenzo m sglavo

  27. Detection of phases in Fe‐doped YSZ by XRD and Raman spectroscopy

    Article • International Journal of Applied Ceramic Technology, May 2020, Wiley

    prof vincenzo m sglavo

  28. Spark plasma sintering of alumina/yttria‐doped silicon carbide

    Article • International Journal of Ceramic Engineering & Science, February 2020, Wiley

    prof vincenzo m sglavo

  29. Flash-induced spreading of metals on zirconia

    Article • Scripta Materialia, February 2020, Elsevier

    prof vincenzo m sglavo

  30. A Comprehensive Study of Custom-Made Ceramic Separators for Microbial Fuel Cells: Towards “Living” Bricks

    Article • Energies, October 2019, MDPI AG

    prof vincenzo m sglavo

  31. Flash joining of conductive ceramics in a few seconds by flash spark plasma sintering

    Article • Journal of the European Ceramic Society, July 2019, Elsevier

    prof vincenzo m sglavo

  32. Flash sintering of Mg-doped tricalcium phosphate (TCP) nanopowders

    Article • Journal of the European Ceramic Society, May 2019, Elsevier

    prof vincenzo m sglavo

  33. Gd/Sm-Pr Co-Doped Ceria: A First Report of the Precipitation Method Effect on Flash Sintering

    Article • Materials, April 2019, MDPI AG

    prof vincenzo m sglavo

  34. Mechanical properties of resorbable calcium-phosphate glass optical fiber and capillaries

    Article • Journal of Alloys and Compounds, March 2019, Elsevier

    prof vincenzo m sglavo

  35. Flash sintering of ceramics

    Article • Journal of the European Ceramic Society, February 2019, Elsevier

    prof vincenzo m sglavo

  36. Microstructural temperature gradient-driven diffusion: Possible densification mechanism for flash sintering of zirconia?

    Article • Ceramics International, January 2019, Elsevier

    prof vincenzo m sglavo

  37. Copper-based electrodes for IT-SOFC

    Article • Journal of the European Ceramic Society, January 2019, Elsevier

    prof vincenzo m sglavo

  38. Fabrication and Testing of Copper/Gadolinium-Doped Ceria-Based Solid Oxide Fuel Cells Operating at Intermediate Temperature

    Article • Energy Technology, October 2018, Wiley

    prof vincenzo m sglavo

  39. Phenomenological understanding of flash sintering in MnCo 2 O 4

    Article • Journal of the European Ceramic Society, October 2018, Elsevier

    prof vincenzo m sglavo

  40. Electric current effect during the early stages of field-assisted sintering

    Article • Journal of the American Ceramic Society, August 2018, Wiley

    prof vincenzo m sglavo

  41. Investigation of Electrochemical, Optical and Thermal Effects during Flash Sintering of 8YSZ

    Article • Materials, July 2018, MDPI AG

    prof vincenzo m sglavo

  42. DC-electro softening in soda lime silicate glass: An electro-thermal analysis

    Article • Scripta Materialia, July 2018, Elsevier

    prof vincenzo m sglavo

  43. Current-induced abnormal and oriented grain growth in corundum upon flash sintering

    Article • Scripta Materialia, June 2018, Elsevier

    prof vincenzo m sglavo

  44. Design and characterization of porous mullite based semi-vitrified ceramics

    Article • Ceramics International, May 2018, Elsevier

    prof vincenzo m sglavo

  45. Sintering of a new class of materials (entropy-stabilized oxides) via simple synthesis methods

    Article • Journal of Materials Science, February 2018, Springer Science + Business Media

    Luca Spiridigliozzi, prof vincenzo m sglavo

  46. HA/ β -TCP plasma sprayed coatings on Ti substrate for biomedical applications

    Article • Ceramics International, February 2018, Elsevier

    prof vincenzo m sglavo

  47. Tuning the flash sintering characteristics of ceria with MnCo2O4

    Article • Materials Science and Engineering B, February 2018, Elsevier

    prof vincenzo m sglavo

  48. Flash sintering of tricalcium phosphate (TCP) bioceramics

    Article • Journal of the European Ceramic Society, January 2018, Elsevier

    prof vincenzo m sglavo

  49. Viscous flow flash sintering of porous silica glass

    Article • Journal of Non-Crystalline Solids, November 2017, Elsevier

    prof vincenzo m sglavo

  50. PDMS Template Generator for Wearable Thermoelectric Energy Harvesting Applications

    Article • September 2017, Springer Science + Business Media

    prof vincenzo m sglavo

  51. The role of kyanite in the crystallization and densification of the high strength mullite matrix composites

    Article • Journal of Thermal Analysis and Calorimetry, September 2017, Springer Science + Business Media

    prof vincenzo m sglavo

  52. Porcelain stoneware consolidation by flash sintering

    Article • Journal of the American Ceramic Society, August 2017, Wiley

    prof vincenzo m sglavo

  53. Ba/Sr celsian sintering into dense monoclinic celsian at reduced temperatures

    Article • Journal of the American Ceramic Society, August 2017, Wiley

    prof vincenzo m sglavo, Prof Gianfranco Dell'Agli, Luca Spiridigliozzi, PhD Antonello Marocco

  54. Modelling, fabrication and experimental testing of an heat sink free wearable thermoelectric generator

    Article • Energy Conversion and Management, August 2017, Elsevier

    prof vincenzo m sglavo

  55. Photoemission during flash sintering: An interpretation based on thermal radiation

    Article • Journal of the European Ceramic Society, August 2017, Elsevier

    prof vincenzo m sglavo

  56. Influence of Copper-based Anode Composition on Intermediate Temperature Solid Oxide Fuel Cells Performance

    Article • Fuel Cells, July 2017, Wiley

    prof vincenzo m sglavo

  57. Can annealing improve the chemical strengthening of thin borosilicate glass?

    Article • Journal of Non-Crystalline Solids, June 2017, Elsevier

    prof vincenzo m sglavo

  58. Ceria-Based Nanoceramics by Flash Sintering

    Article • Advanced Science Letters, June 2017, American Scientific Publishers

    prof vincenzo m sglavo

  59. Ceramic laminates with improved mechanical reliability by tailoring the porosity of the constituting layers

    Article • Journal of the European Ceramic Society, April 2017, Elsevier

    prof vincenzo m sglavo

  60. Effect of anode thickness and Cu content on consolidation and performance of planar copper-based anode-supported SOFC

    Article • International Journal of Hydrogen Energy, April 2017, Elsevier

    prof vincenzo m sglavo

  61. Microstructural and electrical investigation of flash-sintered Gd/Sm-doped ceria

    Article • Journal of Materials Science, March 2017, Springer Science + Business Media

    prof vincenzo m sglavo

  62. Electric field-assisted ion exchange strengthening of borosilicate and soda lime silicate glass

    Article • International Journal of Applied Glass Science, March 2017, Wiley

    prof vincenzo m sglavo

  63. Rapid densification of Samarium-doped Ceria ceramic with nanometric grain size at 900–1100 °C

    Article • Materials Letters, March 2017, Elsevier

    prof vincenzo m sglavo

  64. Influence of salt bath calcium contamination on soda lime silicate glass chemical strengthening

    Article • Journal of Non-Crystalline Solids, February 2017, Elsevier

    prof vincenzo m sglavo

  65. Synthesis and characterization of strontium-substituted hydroxyapatite nanoparticles for bone regeneration

    Article • Materials Science and Engineering C, February 2017, Elsevier

    prof vincenzo m sglavo

  66. Liquid phase flash sintering in magnesia silicate glass-containing alumina

    Article • Journal of the European Ceramic Society, February 2017, Elsevier

    prof vincenzo m sglavo

  67. Flash Sintering of Alumina and Its Microstructural Evolution

    Article • January 2017, Wiley

    prof vincenzo m sglavo

  68. Phosphate glass fibers for optical amplifiers and biomedical applications

    Article • January 2017, Optical Society of America (OSA)

    prof vincenzo m sglavo

  69. Performance and evolution of planar copper-based anode-supported solid oxide fuel cells

    Article • Journal of the Ceramic Society of Japan, January 2017, Ceramic Society of Japan

    prof vincenzo m sglavo

  70. Ion-exchange strengthening of borosilicate glass: Influence of salt impurities and treatment temperature

    Article • Journal of Non-Crystalline Solids, January 2017, Elsevier

    prof vincenzo m sglavo

  71. Corrigendum to “Mechanical properties and residual stresses in ZrB 2 –SiC spark plasma sintered ceramic composites” [J. Eur. Ceram. Soc. 36 (June (7)) (2016) 1527–1537]

    Article • Journal of the European Ceramic Society, November 2016, Elsevier

    prof vincenzo m sglavo

  72. Theoretical and phenomenological analogies between flash sintering and dielectric breakdown in α-alumina

    Article • Journal of Applied Physics, October 2016, American Institute of Physics

    prof vincenzo m sglavo

  73. Production of planar copper-based anode supported intermediate temperature solid oxide fuel cells cosintered at 950 °C

    Article • Journal of Power Sources, October 2016, Elsevier

    prof vincenzo m sglavo

  74. Flash sintering of alumina: Effect of different operating conditions on densification

    Article • Journal of the European Ceramic Society, August 2016, Elsevier

    prof vincenzo m sglavo

  75. Conventional and field-assisted sintering of nanosized Gd-doped ceria synthesized by co-precipitation

    Article • Ceramics International, August 2016, Elsevier

    prof vincenzo m sglavo, PhD Claudio Ferone

  76. Mechanical properties and residual stresses in ZrB 2 –SiC spark plasma sintered ceramic composites

    Article • Journal of the European Ceramic Society, June 2016, Elsevier

    prof vincenzo m sglavo

  77. Design of Inorganic Polymer Mortar from Ferricalsialic and Calsialic Slags for Indoor Humidity Control

    Article • Materials, May 2016, MDPI AG

    prof vincenzo m sglavo

  78. Effect of Mg2+ doping on beta–alpha phase transition in tricalcium phosphate (TCP) bioceramics

    Article • Acta Biomaterialia, March 2016, Elsevier

    prof vincenzo m sglavo

  79. Self-compacting geopolymer concretes: Effects of addition of aluminosilicate-rich fines

    Article • Journal of Building Engineering, March 2016, Elsevier

    prof vincenzo m sglavo

  80. Processing and characterization of diatom nanoparticles and microparticles as potential source of silicon for bone tissue engineering

    Article • Materials Science and Engineering C, February 2016, Elsevier

    Prof. Devid Maniglio, prof vincenzo m sglavo

  81. Chromium and vanadium carbide and nitride coatings obtained by TRD techniques on UNI 42CrMoS4 (AISI 4140) steel

    Article • Surface and Coatings Technology, January 2016, Elsevier

    prof vincenzo m sglavo

  82. Effect of the Precipitating Agent on the Synthesis and Sintering Behavior of 20 mol% Sm-Doped Ceria

    Article • Advances in Materials Science and Engineering, January 2016, Hindawi Publishing Corporation

    prof vincenzo m sglavo

  83. Alpha-Beta Phase Transformation in Tricalcium Phosphate (TCP)Ceramics: Effect of Mg2+Doping

    Article • December 2015, Wiley

    prof vincenzo m sglavo

  84. Field Assisted Sintering of Silicate Glass-Containing Alumina

    Article • December 2015, Wiley

    prof vincenzo m sglavo

  85. Transformation of the geopolymer gels to crystalline bonds in cold-setting refractory concretes: Pore evolution, mechanical strength and microstructure

    Article • Materials & Design, December 2015, Elsevier

    prof vincenzo m sglavo

  86. Effect of KNO3 Molten Bath Na Enrichment on the Mechanical Performances of Ion-exchanged Soda-Lime-Silicate Glass

    Article • September 2015, IntechOpen

    prof vincenzo m sglavo

  87. Fe-doped YSZ electrolyte for the fabrication of metal supported-SOFC by co-sintering

    Article • Ceramics International, September 2015, Elsevier

    prof vincenzo m sglavo

  88. Effect of Bismuth Oxide as Sintering Aid for Gadolinia-doped Ceria at 1050 C

    Article • ECS Transactions, July 2015, The Electrochemical Society

    prof vincenzo m sglavo

  89. Production and Performance of Copper-based Anode-supported SOFCs

    Article • ECS Transactions, July 2015, The Electrochemical Society

    prof vincenzo m sglavo

  90. Fabrication and co-sintering of thin tubular IT-SOFC with Cu2O–GDC cermet supporting anode and Li2O-doped GDC electrolyte

    Article • Journal of the European Ceramic Society, July 2015, Elsevier

    prof vincenzo m sglavo

  91. Effect of the Current Collector on Performance of Anode-Supported Microtubular Solid Oxide Fuel Cells

    Article • Journal of Fuel Cell Science and Technology, March 2015, ASME International

    prof vincenzo m sglavo

  92. Flash Sintering of (La, Sr)(Co, Fe)O3-Gd-Doped CeO2Composite

    Article • Journal of the American Ceramic Society, March 2015, Wiley

    Dr ANSHU GAUR, prof vincenzo m sglavo

  93. Effect of MgO addition on solid state synthesis and thermal behavior of beta-tricalcium phosphate

    Article • Ceramics International, March 2015, Elsevier

    prof vincenzo m sglavo

  94. Influence of processing conditions on the microstructure of NiO-YSZ supporting anode for solid oxide fuel cells

    Article • Ceramics International, March 2015, Elsevier

    prof vincenzo m sglavo

  95. Micro- and nano-hydroxyapatite as active reinforcement for soft biocomposites

    Article • International Journal of Biological Macromolecules, January 2015, Elsevier

    prof vincenzo m sglavo

  96. Al-doped Ni/YSZ Anode Material with Improved Electrical Conductivity for MS-SOFC Fabrication by Cosintering

    Article • International Journal of Applied Ceramic Technology, December 2014, Wiley

    prof vincenzo m sglavo

  97. Chemical Strengthening of Soda Lime Silicate Float Glass: Effect of Small Differences in the KNO3Bath

    Article • International Journal of Applied Glass Science, December 2014, Wiley

    prof vincenzo m sglavo

  98. Flash sintering as a nucleation phenomenon and a model thereof

    Article • Journal of the European Ceramic Society, December 2014, Elsevier

    prof vincenzo m sglavo

  99. Metakaolin-based inorganic polymer composite: Effects of fine aggregate composition and structure on porosity evolution, microstructure and mechanical properties

    Article • Cement and Concrete Composites, October 2014, Elsevier

    prof vincenzo m sglavo

  100. Analysis of the surface structure of soda lime silicate glass after chemical strengthening in different KNO3 salt baths

    Article • Journal of Non-Crystalline Solids, October 2014, Elsevier

    prof vincenzo m sglavo

  101. Flash-sintering of MnCo2O4 and its relation to phase stability

    Article • Journal of the European Ceramic Society, September 2014, Elsevier

    Dr ANSHU GAUR, prof vincenzo m sglavo

  102. Field assisted sintering of ceramic constituted by alumina and yttria stabilized zirconia

    Article • Journal of the European Ceramic Society, September 2014, Elsevier

    prof vincenzo m sglavo

  103. Densification of La0.6Sr0.4Co0.2Fe0.8O3 ceramic by flash sintering at temperature less than 100 °C

    Article • Journal of Materials Science, June 2014, Springer Science + Business Media

    Dr ANSHU GAUR, prof vincenzo m sglavo

  104. Novel method for the identification of the maximum solid loading suitable for optimal extrusion of ceramic pastes

    Article • Journal of Advanced Ceramics, March 2014, Tsinghua University Press

    prof vincenzo m sglavo

  105. Mechanical Properties of Phosphate Glass Optical Fibers

    Article • International Journal of Applied Glass Science, August 2013, Wiley

    prof vincenzo m sglavo

  106. Ferritic Cathodes Degradation by Potassium/Chromium Poisoning and Air Humidification

    Article • Fuel Cells, August 2013, Wiley

    prof vincenzo m sglavo

  107. Comparative Performance Analysis of Anode-Supported Micro-Tubular SOFCs with Different Current-Collection Architectures

    Article • Fuel Cells, July 2013, Wiley

    prof vincenzo m sglavo

  108. Electric Field Assisted Sintering of Cubic Zirconia at 390°C

    Article • Journal of the American Ceramic Society, March 2013, Wiley

    prof vincenzo m sglavo

  109. A New HA/TTCP Material for Bone Augmentation

    Article • Implant Dentistry, February 2013, Wolters Kluwer Health

    prof vincenzo m sglavo

  110. Phosphate glasses for optical fibers: Synthesis, characterization and mechanical properties

    Article • Journal of Non-Crystalline Solids, February 2013, Elsevier

    prof vincenzo m sglavo

  111. Design of inorganic polymer cements: Effects of matrix strengthening on microstructure

    Article • Construction and Building Materials, January 2013, Elsevier

    prof vincenzo m sglavo

  112. Anode Supported Solid Oxide Fuel Cells with Improved Cathode/Electrolyte Interface

    Article • April 2012, Wiley

    prof vincenzo m sglavo

  113. Correlation between microstructural evolution and mechanical properties of α -quartz and alumina reinforced K-geopolymers during high temperature treatments

    Article • Advances in Applied Ceramics Structural Functional and Bioceramics, April 2012, SAGE Publications

    Elie Kamseu, prof vincenzo m sglavo

  114. Fabrication of Innovative Compliant Current Collector-Supported Microtubular Solid Oxide Fuel Cells

    Article • International Journal of Applied Ceramic Technology, December 2011, Wiley

    prof vincenzo m sglavo

  115. Pressureless sintering of B4C–TiB2 composites with Al additions

    Article • Ceramics International, December 2011, Elsevier

    Professor Ehsan Taheri-Nassaj, prof vincenzo m sglavo

  116. Stability of ferritic perovskite cathodes in anode-supported solid oxide fuel cells under different processing and operation parameters

    Article • Electrochimica Acta, December 2011, Elsevier

    prof vincenzo m sglavo

  117. Hydroxyapatite Scaffolds for Bone Tissue Engineering with Controlled Porosity and Mechanical Strength

    Article • November 2011, Wiley

    prof vincenzo m sglavo

  118. Influence of Operational Parameters on LSCF and LSF Stability

    Article • November 2011, Wiley

    prof vincenzo m sglavo

  119. Production of Current Collector-Supported Micro-Tubular Solid Oxide Fuel Cells with Sacrificial Inner Core

    Article • November 2011, Wiley

    prof vincenzo m sglavo

  120. Influence of curing temperature on the evolution of magnesium oxychloride cement

    Article • Journal of Materials Science, October 2011, Springer Science + Business Media

    prof vincenzo m sglavo

  121. Flash-sintering of Co2MnO4 spinel for solid oxide fuel cell applications

    Article • Journal of Power Sources, February 2011, Elsevier

    prof vincenzo m sglavo

  122. High Strength Engineered Alumina-Silicon Carbide Laminated Composites by Spark Plasma Sintering

    Article • Procedia Engineering, January 2011, Elsevier

    prof vincenzo m sglavo

  123. Production of Compliant Current Collector-Supported Micro-Tubular Solid Oxide Fuel Cells

    Article • January 2011, The Electrochemical Society

    prof vincenzo m sglavo

  124. Vertical sintering to measure the uniaxial viscosity of thin ceramic layers

    Article • Acta Materialia, October 2010, Elsevier

    prof vincenzo m sglavo

  125. ChemInform Abstract: Threshold Stress Intensity Factor (Kth) in Soda-Lime Silicate Glass by Interrupted Static Fatigue Test.

    Article • ChemInform, August 2010, Wiley

    prof vincenzo m sglavo

  126. Application of Semiconductor Ceramic Glazes to High-Voltage Ceramic Insulators

    Article • January 2010, Wiley

    prof vincenzo m sglavo

  127. Curvature Evolution and Control in Anode Supported Solid Oxide Fuel Cells

    Article • January 2010, Wiley

    prof vincenzo m sglavo

  128. Pressureless sintering of boron carbide

    Article • Ceramics International, January 2010, Elsevier

    Professor Ehsan Taheri-Nassaj, prof vincenzo m sglavo

  129. Alumina/Silicon Carbide Laminated Composites by Spark Plasma Sintering

    Article • Journal of the American Ceramic Society, November 2009, Wiley

    prof vincenzo m sglavo

  130. Effect of Al and Ce doping on the deformation upon sintering in sequential tape cast layers for solid oxide fuel cells

    Article • Journal of Power Sources, August 2009, Elsevier

    prof vincenzo m sglavo

  131. Alkali-ions diffusion, mullite formation, and crystals dissolution during sintering of porcelain bodies: Microstructural approach

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, June 2009, SAGE Publications

    prof vincenzo m sglavo

  132. Sintering and Deformation of Solid Oxide Fuel Cells Produced by Sequential Tape Casting

    Article • International Journal of Applied Ceramic Technology, May 2009, Wiley

    prof vincenzo m sglavo

  133. Effect of Al addition on pressureless sintering of B4C

    Article • Ceramics International, March 2009, Elsevier

    Professor Ehsan Taheri-Nassaj, prof vincenzo m sglavo

  134. Effect of Doping Elements on the Redox Kinetics of NiO-YSZ Powders for SOFC Applications

    Article • January 2009, The Electrochemical Society

    prof vincenzo m sglavo

  135. Nondestructive Measurement of the Residual Stress Profile in Ceramic Laminates

    Article • Journal of the American Ceramic Society, April 2008, Wiley

    Professor Paolo Scardi, prof vincenzo m sglavo

  136. Protective Coatings of Metallic Interconnects for IT-SOFC Application

    Article • Journal of Fuel Cell Science and Technology, January 2008, ASME International

    prof vincenzo m sglavo

  137. In situ observation of crack propagation in ESP (engineered stress profile) glass

    Article • Engineering Fracture Mechanics, June 2007, Elsevier

    prof vincenzo m sglavo

  138. Strengthening of soda-lime-silica glass by surface treatment with sol–gel silica

    Article • Journal of Non-Crystalline Solids, June 2007, Elsevier

    prof vincenzo m sglavo

  139. Tape casting fabrication and co-sintering of solid oxide “half cells” with a cathode–electrolyte porous interface

    Article • Solid State Ionics, October 2006, Elsevier

    prof vincenzo m sglavo

  140. Design and production of ceramic laminates with high mechanical resistance and reliability

    Article • Acta Materialia, October 2006, Elsevier

    prof vincenzo m sglavo

  141. Fabrication and optical assessment of sol-gel-derived photonic bandgap dielectric structures

    Article • April 2006, SPIE

    Dr Gualtiero Nunzi Conti , dr. Giancarlo C. Righini, prof vincenzo m sglavo

  142. Design and production of ceramic laminates with high mechanical reliability

    Article • Composites Part B Engineering, January 2006, Elsevier

    prof vincenzo m sglavo

  143. Reduction and Reoxidation Processes of NiO∕YSZ Composite for Solid Oxide Fuel Cell Anodes

    Article • Journal of Fuel Cell Science and Technology, January 2006, ASME International

    prof vincenzo m sglavo

  144. Processing and Thermal Shock Resistance of a Polymer-Derived MoSi2/SiCO Ceramic Composite

    Article • Journal of the American Ceramic Society, November 2005, Wiley

    prof vincenzo m sglavo

  145. Tailored Residual Stresses in High Reliability Alumina-Mullite Ceramic Laminates

    Article • Journal of the American Ceramic Society, October 2005, Wiley

    prof vincenzo m sglavo

  146. Procedure for residual stress profile determination by curvature measurements

    Article • Mechanics of Materials, August 2005, Elsevier

    prof vincenzo m sglavo

  147. Flaw-Insensitive Ion-Exchanged Glass: I, Theoretical Aspects

    Article • Journal of the American Ceramic Society, December 2004, Wiley

    prof vincenzo m sglavo

  148. Processing of glasses with engineered stress profiles

    Article • Journal of Non-Crystalline Solids, September 2004, Elsevier

    prof vincenzo m sglavo

  149. Soda–borosilicate glass: normal or anomalous behavior under Vickers indentation?

    Article • Journal of Non-Crystalline Solids, September 2004, Elsevier

    prof vincenzo m sglavo

  150. Engineered Stress-Profile Silicate Glass: High Strength Material Insensitive to Surface Defects and Fatigue

    Article • Advanced Engineering Materials, May 2004, Wiley

    prof vincenzo m sglavo

  151. Comparison of the sandwiched beam (SB) and opposite roller loading (ORL) techniques for the pre-cracking of brittle materials

    Article • Journal of the European Ceramic Society, July 2003, Elsevier

    prof vincenzo m sglavo

  152. Assessment of high power HEV lead-acid battery advancements by comparative benchmarking with a European test procedure

    Article • Journal of Power Sources, July 2003, Elsevier

    prof vincenzo m sglavo

  153. High Power Lead-Acid Battery for Heavy-Duty HEV, On the Road and Laboratory Performance and Reliability

    Article • March 2003, SAE International

    prof vincenzo m sglavo

  154. Influence of Composition on Fatigue Behavior and Threshold Stress Intensity Factor of Borosilicate Glasses

    Article • Journal of the American Ceramic Society, October 2002, Wiley

    prof vincenzo m sglavo

  155. Measurement of Fatigue Limit in Silicate Glasses

    Article • January 2002, Springer Science + Business Media

    prof vincenzo m sglavo

  156. The SB (Sandwiched Beam) Technique for Pre-Cracking Brittle Materials

    Article • January 2002, Springer Science + Business Media

    prof vincenzo m sglavo

  157. Designing Residual Stress Profiles to Produce Flaw-Tolerant Glass

    Article • January 2002, Springer Science + Business Media

    prof vincenzo m sglavo

  158. Fatigue limit in fused silica

    Article • Journal of the European Ceramic Society, May 2001, Elsevier

    prof vincenzo m sglavo

  159. Bauxite ‘red mud’ in the ceramic industry. Part 1: thermal behaviour

    Article • Journal of the European Ceramic Society, March 2000, Elsevier

    prof vincenzo m sglavo

  160. Bauxite ‘red mud’ in the ceramic industry. Part 2: production of clay-based ceramics

    Article • Journal of the European Ceramic Society, March 2000, Elsevier

    prof vincenzo m sglavo

  161. The preparation and mechanical properties of Al2O3/Ni3Al composites

    Article • Composites Science and Technology, June 1999, Elsevier

    prof vincenzo m sglavo

  162. Characterisation of subcritical crack growth in ceramics using indentation cracks

    Article • British Ceramic Transactions, June 1999, Taylor & Francis

    prof vincenzo m sglavo

  163. Structure-property behavior during aging of sol-gel-derived silica modified with Si–H and Si–CH3 groups

    Article • Journal of Materials Research, May 1999, Cambridge University Press

    prof vincenzo m sglavo

  164. Crack Arrest and Multiple Cracking in Glass Through the Use of Designed Residual Stress Profiles

    Article • Science, February 1999, American Association for the Advancement of Science

    prof vincenzo m sglavo

  165. Article • Journal of Materials Science Letters, January 1999, Springer Science + Business Media

    prof vincenzo m sglavo

  166. Article • Journal of Materials Science Letters, January 1999, Springer Science + Business Media

    prof vincenzo m sglavo

  167. Article • Journal of Materials Science, January 1999, Springer Science + Business Media

    prof vincenzo m sglavo

  168. Article • Journal of Materials Science, January 1999, Springer Science + Business Media

    prof vincenzo m sglavo

  169. Relaxation of indentation residual stress in alumina: Experimental observation by X-ray diffraction

    Article • Journal of the European Ceramic Society, November 1998, Elsevier

    prof vincenzo m sglavo, Professor Paolo Scardi

  170. Joining of reaction-bonded silicon carbide using a preceramic polymer

    Article • Journal of Materials Science, May 1998, Springer Science + Business Media

    prof vincenzo m sglavo

  171. Production of sharp cracks in ceramic materials by three-point bending of sandwiched specimens

    Article • Engineering Fracture Mechanics, March 1998, Elsevier

    prof vincenzo m sglavo

  172. Ni3Al intermetallic compound as second phase in Al2O3 ceramic composites

    Article • Materials Science and Engineering A, December 1997, Elsevier

    prof vincenzo m sglavo

  173. CYCLIC LOADING BEHAVIOUR OF SODA-LIME SILICATE GLASS USING INDENTATION CRACKS

    Article • Fatigue & Fracture of Engineering Materials & Structures, August 1997, Wiley

    prof vincenzo m sglavo

  174. Crack decorating technique for fracture-toughness measurement in alumina

    Article • Journal of the European Ceramic Society, January 1997, Elsevier

    prof vincenzo m sglavo

  175. The sub-critical indentation fracture process in soda-lime-silica glass

    Article • Engineering Fracture Mechanics, September 1996, Elsevier

    prof vincenzo m sglavo

  176. Determination of Threshold Stress Intensity Factor for Sub-Critical Crack Growth in Ceramic Materials by Interrupted Static Fatigue Test

    Article • January 1996, Springer Science + Business Media

    prof vincenzo m sglavo

  177. Threshold stress intensity factor in soda-lime silicate glass by interrupted static fatigue test

    Article • Journal of the European Ceramic Society, January 1996, Elsevier

    prof vincenzo m sglavo

  178. Subcritical Growth of Indentation Median Cracks in Soda-Lime-Silica Glass

    Article • Journal of the American Ceramic Society, March 1995, Wiley

    prof vincenzo m sglavo

  179. Influence of indentation crack configuration on strength and fatigue behaviour of soda-lime silicate glass

    Article • Acta Metallurgica et Materialia, March 1995, Elsevier

    prof vincenzo m sglavo

  180. SiO2/SnO2 and Sn/Sb-oxide/SiO2 gel-derived composites. Part 2: Thermal evolution and phase analysis

    Article • Journal of Sol-Gel Science and Technology, February 1995, Springer Science + Business Media

    prof vincenzo m sglavo

  181. The interrupted static fatigue test for evaluating threshold stress intensity factor in ceramic materials: A numerical analysis

    Article • Journal of the European Ceramic Society, January 1995, Elsevier

    prof vincenzo m sglavo

  182. Indentation method for fracture resistance determination of metal/ceramic interfaces in thick TBCs

    Article • Journal of Thermal Spray Technology, March 1994, Springer Science + Business Media

    prof vincenzo m sglavo

  183. Aging effect on the mechanical properties of hybrid gels

    Article • Journal of Sol-Gel Science and Technology, January 1994, Springer Science + Business Media

    prof vincenzo m sglavo

  184. Fabrication and characterization of polymer-derived Si2N2O-ZrO2 nanocomposite ceramics

    Article • Journal of Materials Science, December 1993, Springer Science + Business Media

    prof vincenzo m sglavo

  185. Effect of etch depth on strength of soda-lime glass rods by a statistical approach

    Article • Journal of the European Ceramic Society, January 1993, Elsevier

    prof vincenzo m sglavo

  186. Sol-gel derived SiO2-ZrO2 nanocomposite fibers: Influence of composition, thermal treatment and microstructure on tensile strength

    Article • Journal of the European Ceramic Society, January 1993, Elsevier

    prof vincenzo m sglavo

  187. Viscosity behaviour of SiO2ZrO2 gelling solutions: effect of acetic anhydride addition

    Article • Journal of Non-Crystalline Solids, January 1992, Elsevier

    prof vincenzo m sglavo

  188. Fabrication and Characterization of β-SiAION Components from Polymeric Precursors

    Article • MRS Proceedings, January 1992, Cambridge University Press

    prof vincenzo m sglavo

  189. Fracture mechanics determination of stress profiles in NaK ion-exchanged glass optical waveguides

    Article • Materials Science and Engineering A, November 1989, Elsevier

    prof vincenzo m sglavo

  190. Bi-Axial Four Points Flexural and Compressive Strength of Geopolymer Materials Based Na2O-K2O-Al2O3-SiO2 Systems

    Article • Wiley

    prof vincenzo m sglavo