All Stories

  1. Characterization of Early Age Curing and Shrinkage of Metakaolin-Based Inorganic Binders with Different Rheological Behavior by Fiber Bragg Grating Sensors

    Article • Materials, December 2017, MDPI AG

    PhD Claudio Ferone

  2. Mechanical Behaviour of Soil Improved by Alkali Activated Binders

    Article • Environments, November 2017, MDPI AG

    PhD Claudio Ferone

  3. Thermal cycling stability of fly ash based geopolymer mortars

    Article • Composites Part B Engineering, November 2017, Elsevier

    PhD Claudio Ferone

  4. Geopolymerization Ability of Natural and Secondary Raw Materials by Solubility Test in Alkaline Media

    Article • Environments, August 2017, MDPI AG

    PhD Claudio Ferone

  5. Conventional and field-assisted sintering of nanosized Gd-doped ceria synthesized by co-precipitation

    Article • Ceramics International, August 2016, Elsevier

    prof vincenzo m sglavo, PhD Claudio Ferone

  6. TiO2-Based Photocatalytic Geopolymers for Nitric Oxide Degradation

    Article • Materials, June 2016, MDPI AG

    PhD Claudio Ferone

  7. Innovative Fly Ash Geopolymer-Epoxy Composites: Preparation, Microstructure and Mechanical Properties

    Article • Materials, June 2016, MDPI AG

    PhD Claudio Ferone

  8. Influence of Lithium on the Sintering Behavior and Electrical Properties of Ce0.8Gd0.2O1.9for Intermediate-Temperature Solid Oxide Fuel Cells

    Article • Energy Technology, January 2016, Wiley

    PhD Claudio Ferone

  9. Eco-sustainable Geopolymer Concrete Blocks Production Process

    Article • Agriculture and Agricultural Science Procedia, January 2016, Elsevier

    Dr Antonella Petrillo, PhD Claudio Ferone

  10. Electrical and microstructural characterization of ceramic gadolinium-doped ceria electrolytes for ITSOFCs by sol-gel route

    Article • Journal of Applied Biomaterials & Functional Materials, January 2016, SAGE Publications

    PhD Claudio Ferone

  11. Effect of the mineralizer solution in the hydrothermal synthesis of gadolinium-doped (10% mol Gd) ceria nanopowders

    Article • Journal of Applied Biomaterials & Functional Materials, January 2016, SAGE Publications

    Prof Gianfranco Dell'Agli, PhD Claudio Ferone, PhD Antonello Marocco

  12. Preparation, structure and properties of hybrid materials based on geopolymers and polysiloxanes

    Article • Materials & Design, December 2015, Elsevier

    PhD Claudio Ferone

  13. Low temperature alkaline activation of weathered fly ash: Influence of mineral admixtures on early age performance

    Article • Construction and Building Materials, July 2015, Elsevier

    PhD Claudio Ferone

  14. Fiber Bragg grating sensors as a tool to evaluate the influence of filler on shrinkage of geopolymer matrices

    Article • May 2015, SPIE

    PhD Claudio Ferone

  15. Fire resistant melamine based organic-geopolymer hybrid composites

    Article • Cement and Concrete Composites, May 2015, Elsevier

    PhD Claudio Ferone

  16. Thermally treated clay sediments as geopolymer source material

    Article • Applied Clay Science, April 2015, Elsevier

    PhD Claudio Ferone

  17. Phosphorus stably bonded to a silica gel matrix through niobium bridges

    Article • Journal of Materials Chemistry A, January 2015, Royal Society of Chemistry

    PhD Claudio Ferone

  18. Tensile behaviour of geopolymer-based materials under medium and high strain rates

    Article • EPJ Web of Conferences, January 2015, EDP Sciences

    Professor Ezio Cadoni, PhD Claudio Ferone

  19. Clay sediment geopolymerization by means of alkali metal aluminate activation

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    PhD Claudio Ferone

  20. Finite Element Method Modeling of Sensible Heat Thermal Energy Storage with Innovative Concretes and Comparative Analysis with Literature Benchmarks

    Article • Energies, August 2014, MDPI AG

    PhD Claudio Ferone

  21. Recycling of Clay Sediments for Geopolymer Binder Production. A New Perspective for Reservoir Management in the Framework of Italian Legislation: The Occhito Reservoir Case Study

    Article • Materials, July 2014, MDPI AG

    PhD Claudio Ferone

  22. Rigid chain ribbon-like metallopolymers

    Article • Journal of Polymer Science Part A Polymer Chemistry, June 2014, Wiley

    PhD Claudio Ferone

  23. Experimental and Numerical Analysis of Thermal and Hygrometric Characteristics of Building Structures Employing Recycled Plastic Aggregates and Geopolymer Concrete

    Article • Energies, November 2013, MDPI AG

    PhD Claudio Ferone

  24. Coal Combustion Wastes Reuse in Low Energy Artificial Aggregates Manufacturing

    Article • Materials, October 2013, MDPI AG

    PhD Claudio Ferone

  25. Synthesis of SiO2and CaO rich calcium silicate systems via sol-gel process: Bioactivity, biocompatibility, and drug delivery tests

    Article • Journal of Biomedical Materials Research Part A, October 2013, Wiley

    PhD Claudio Ferone

  26. Synthesis and Characterization of Novel Epoxy Geopolymer Hybrid Composites

    Article • Materials, September 2013, MDPI AG

    PhD Claudio Ferone

  27. Synthesis and Characterizations of Melamine-Based Epoxy Resins

    Article • International Journal of Molecular Sciences, September 2013, MDPI AG

    PhD Claudio Ferone

  28. Recycling of Pre-Washed Municipal Solid Waste Incinerator Fly Ash in the Manufacturing of Low Temperature Setting Geopolymer Materials

    Article • Materials, August 2013, MDPI AG

    PhD Claudio Ferone

  29. Synthesis of highly regioregular poly[3-(4-alkoxyphenyl)-thiophene]s by oxidative catalysis using copper complexes

    Article • Journal of Polymer Science Part A Polymer Chemistry, July 2013, Wiley

    PhD Claudio Ferone

  30. Preparation and Characterization of New Geopolymer-Epoxy Resin Hybrid Mortars

    Article • Materials, July 2013, MDPI AG

    PhD Claudio Ferone

  31. {2-[2,2-Bis(4,4-dimethyl-4,5-dihydro-1,3-oxazol-2-yl-κN)propyl]pyridine}dichloridoiron(II)

    Article • Acta Crystallographica Section E Structure Reports Online, July 2013, International Union of Crystallography

    PhD Claudio Ferone

  32. Application-Oriented Chemical Optimization of a Metakaolin Based Geopolymer

    Article • Materials, May 2013, MDPI AG

    PhD Claudio Ferone

  33. Use of reservoir clay sediments as raw materials for geopolymer binders

    Article • Advances in Applied Ceramics Structural Functional and Bioceramics, May 2013, SAGE Publications

    PhD Claudio Ferone

  34. Novel hybrid organic-geopolymer materials

    Article • Applied Clay Science, March 2013, Elsevier

    PhD Claudio Ferone

  35. Use of geopolymers for composite external reinforcement of RC members

    Article • Composites Part B Engineering, February 2013, Elsevier

    PhD Claudio Ferone

  36. Mechanical Performances of Weathered Coal Fly Ash Based Geopolymer Bricks

    Article • Procedia Engineering, January 2011, Elsevier

    PhD Claudio Ferone

  37. Monoclinic (Ba, Sr)-celsian by thermal treatment of (Ba, Sr)-exchanged zeolite A

    Article • Microporous and Mesoporous Materials, October 2010, Elsevier

    PhD Claudio Ferone, PhD Antonello Marocco

  38. Study of the thermal transformations of Co- and Fe-exchanged zeolites A and X by “in situ” XRD under reducing atmosphere

    Article • Materials Research Bulletin, June 2010, Elsevier

    PhD Claudio Ferone

  39. Corrigendum to “Densification and crystallization of Ba-exchanged zeolite A powders” [Ceram. Int. 34 (2008) 543–549]

    Article • Ceramics International, January 2009, Elsevier

    PhD Claudio Ferone

  40. Monoclinic Sr-celsian by thermal treatment of Sr-exchanged zeolite A, LTA-type framework

    Article • Solid State Ionics, December 2008, Elsevier

    PhD Claudio Ferone

  41. Densification and crystallization of Ba-exchanged zeolite A powders

    Article • Ceramics International, April 2008, Elsevier

    PhD Claudio Ferone

  42. Microwave assisted hydrothermal conversion of Ba-exchanged zeolite A into metastable paracelsian

    Article • Microporous and Mesoporous Materials, November 2006, Elsevier

    PhD Claudio Ferone

  43. Substitution clustering in a non-stoichiometric celsian synthesized by the thermal transformation of barium exchanged zeolite X

    Article • Journal of Solid State Chemistry, July 2006, Elsevier

    PhD Claudio Ferone

  44. Role of Li in the low temperature synthesis of monoclinic celsian from (Ba, Li)-exchanged zeolite-A precursor

    Article • Solid State Sciences, November 2005, Elsevier

    PhD Claudio Ferone

  45. A comparative study of the thermal transformations of Ba-exchanged zeolites A, X and LSX

    Article • Journal of the European Ceramic Society, August 2004, Elsevier

    PhD Claudio Ferone

  46. Thermal crystallization of ion-exchanged zeolite A

    Article • Journal of the European Ceramic Society, September 2003, Elsevier

    PhD Claudio Ferone

  47. 29Si and 27Al NMR study of the thermal transformation of barium exchanged zeolite-A to celsian

    Article • Journal of Materials Chemistry, January 2003, Royal Society of Chemistry

    PhD Claudio Ferone

  48. FTIR study of the thermal transformation of barium-exchanged zeolite A to celsian

    Article • Journal of Materials Chemistry, August 2002, Royal Society of Chemistry

    PhD Claudio Ferone

  49. New Insight into the Thermal Transformation of Barium-Exchanged Zeolite A to Celsian

    Article • Chemistry of Materials, February 2002, American Chemical Society (ACS)

    PhD Claudio Ferone

  50. Crystallization of monoclinic zirconia from metastable phases

    Article • Solid State Ionics, January 2000, Elsevier

    PhD Claudio Ferone

  51. Thermal transformation of Ba-exchanged A and X zeolites into monoclinic celsian

    Article • Solid State Ionics, January 2000, Elsevier

    PhD Claudio Ferone

  52. Dilatometry of Na-, K-, Ca- and NH4-clinoptilolite

    Article • Thermochimica Acta, September 1999, Elsevier

    PhD Claudio Ferone

  53. Ignition of ammonia on various zeolitic substrates

    Article • Thermochimica Acta, October 1997, Elsevier

    PhD Claudio Ferone