Professor Rupinder Singh

All Stories

Multi-Factor Optimization and GLM-Based Reduced-Order Modeling of Modified Electrochemical Machining with a Thermoplastic Cathode Cap for Digital-Twin Development

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, October 2026, Springer Science + Business Media

Professor Rupinder Singh
On design and fabrication of novel lattice-structure based therapeutic equine shoes by powder bed fusion: multi-factor optimization approach

Article • Progress in Additive Manufacturing, September 2026, Springer Science + Business Media

Professor Rupinder Singh
On Parametric Optimization of Direct Ink Writing for Platinum-Cured Silicone Elastomer for Smart Orthotic Insole Applications

Article • Journal of The Institution of Engineers (India) Series C, September 2026, Springer Science + Business Media

Professor Rupinder Singh
On 4D Behavior of 17-4 Precipitate-Hardened Stainless Steel-Based Functional Prototypes under Tensile Loading: Effect of Metastructure and Powder Recycling

Article • Journal of Materials Engineering and Performance, September 2026, Springer Science + Business Media

Professor Rupinder Singh
On the Thermo-Mechanical Characteristics of Meta-Structure-Inspired Equine Orthotic Shoes Fabricated by Powder Bed Fusion with Recycled 17-4 PH Stainless Steel

Article • Journal of Materials Engineering and Performance, September 2026, Springer Science + Business Media

Professor Rupinder Singh, Professor Mohammad Talha
On the Effect of Metastructure and Powder Recycling during Powder Bed Fusion of 17-4 Precipitate-Hardened Stainless Steel-Based Functional Prototypes under Flexural Loading

Article • Journal of Materials Engineering and Performance, September 2026, Springer Science + Business Media

Professor Rupinder Singh
3D Printed Orthotic Insoles of Polylactic Acid Composite with Enhanced Flexural Properties

Article • National Academy Science Letters, August 2026, Springer Science + Business Media

Professor Rupinder Singh
On the Multi-factor Optimization of Powder Bed Fusion–Laser Beam for Fabricating Functionally Graded Material-Based Functional Prototypes of Stainless Steel-Ni-Ti Alloys

Article • Journal of Materials Engineering and Performance, August 2026, Springer Science + Business Media

Professor Rupinder Singh
On torsional behavior of 3D printed 17-4 PH-SS-Ni-625-Ti-6Al-4V compositionally graded structures with lattice interlayers for biomedical applications

Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, July 2026, SAGE Publications

Professor Rupinder Singh
On the Performance Evaluation of Polyvinylidene Difluoride Composite as A Radio-Frequency Sensor

Article • Journal of The Institution of Engineers (India) Series C, July 2026, Springer Science + Business Media

Professor Rupinder Singh
Investigations on Layered-Composition Gradient-Based Functionally Graded Material Processed by Powder Bed Fusion-Laser Beam for the Customization of Tensile Behavior in Biomedical Applications

Article • Journal of Materials Engineering and Performance, July 2026, Springer Science + Business Media

Professor Rupinder Singh
On the Suitability of Liquid Silicon Rubber with Sn-based Catalyst for the Fabrication of a Passive Sensor by Direct Ink Writing for the Preservation of Heritage Clothing

Article • Journal of Materials Engineering and Performance, July 2026, Springer Science + Business Media

Professor Rupinder Singh
On the bakelite reinforced polyamide-6 composite for engineering applications

Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, July 2026, SAGE Publications

Professor Rupinder Singh
On polypropylene-samarium doped ZnO-based composites for the 3D printing of sensor-integrated implants

Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, June 2026, SAGE Publications

Professor Rupinder Singh
Investigations on Compressive Behavior of Powder Bed Fusion-Laser Beam Fabricated Layered Composition-Gradient Functionally Graded Materials for Biomedical Applications

Article • Journal of Materials Engineering and Performance, June 2026, Springer Science + Business Media

Professor Rupinder Singh
On the design and development of a thermoplastic polyurethane-cotton-lycra fiber-based wearable sensor using 3D printing

Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, June 2026, SAGE Publications

Professor Rupinder Singh
On Tailored Flexural Response of Powder Bed Fusion–Laser Beam Fabricated Layered Composition-Gradient-Based Functionally Graded Materials for Biomedical Applications

Article • Journal of Materials Engineering and Performance, May 2026, Springer Science + Business Media

Professor Rupinder Singh
On the Radio-frequency Change While Healing of Comminuted Fracture: A Computational Approach

Article • National Academy Science Letters, May 2026, Springer Science + Business Media

Professor Rupinder Singh
On the in vitro analysis and tuneability of the biosensor for bovines

Article • National Academy Science Letters, May 2026, Springer Science + Business Media

Professor Rupinder Singh
Investigations on the Reusability of Secondary Recycled 17-4 Precipitate Hardened Stainless Steel by Powder Bed Fusion-Laser Beam

Article • Journal of Materials Engineering and Performance, May 2026, Springer Science + Business Media

Professor Rupinder Singh
On modified electrochemical machining with a partial insulating cathode in pulsed and non-pulsed conditions

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, May 2026, Springer Science + Business Media

Professor Rupinder Singh
On the Reusability of Secondary Recycled Powder for the Fabrication of Circular Waveguides

Article • National Academy Science Letters, May 2026, Springer Science + Business Media

Professor Rupinder Singh
On Powder Bed Fusion-Laser Beam-Based Functional Prototypes: Effect of Metastructure, Powder Recycling, and Scanning Strategy

Article • Journal of Materials Engineering and Performance, April 2026, Springer Science + Business Media

Professor Rupinder Singh
On Parametric Optimization of Fused Filament Fabrication for Processing Secondary Recycled PLA Composite

Article • National Academy Science Letters, April 2026, Springer Science + Business Media

Professor Rupinder Singh
Additive Manufacturing of RTV-LSR Elastomeric Sensors for Smart Orthotic Insoles Using Direct Ink Writing

Article • Journal of Materials Engineering and Performance, April 2026, Springer Science + Business Media

Professor Rupinder Singh
On the Mechanical Strain Tunability of Powder Bed Fusion-Laser Beam-Based Functional Parts Using Virgin and Thermally Conditioned Primary Recycled 17-4 Precipitate Hardened Stainless Steel

Article • Journal of Materials Engineering and Performance, April 2026, Springer Science + Business Media

Professor Rupinder Singh
On the Processing of PVDF Composite for Advanced Biosensing Applications

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, April 2026, Springer Science + Business Media

Professor Rupinder Singh
On 3D Printed Polylactic Acid and its Composites as Novel Implantable Sensors

Article • National Academy Science Letters, March 2026, Springer Science + Business Media

Professor Rupinder Singh
Recycling of PVDF-Based Dry Cell by ZnCl2 Reinforcement Using 3D Dispenser Printing

Article • National Academy Science Letters, March 2026, Springer Science + Business Media

Professor Rupinder Singh
On the Flexural Properties of 17-4 Precipitate Hardened Stainless Steel-Based Passive Sensor Components Fabricated by Powder Bed Fusion-Laser Beam

Article • Journal of Materials Engineering and Performance, March 2026, Springer Science + Business Media

Professor Rupinder Singh
On the Fabrication of Innovative La-Doped ZnO-Reinforced PVDF-Based Pressure Sensors

Article • Journal of Materials Engineering and Performance, March 2026, Springer Science + Business Media

Professor Rupinder Singh
On the Flexural and Morphological Properties of 3D Printed Polypropylene-Stubble Waste for Detachable Car Seat Frames

Article • Journal of The Institution of Engineers (India) Series C, February 2026, Springer Science + Business Media

Professor Rupinder Singh
On 4D Printing of Thermoresponsive Innovative Orthosis for Tennis Elbow Treatment

Article • Journal of The Institution of Engineers (India) Series C, February 2026, Springer Science + Business Media

Professor Rupinder Singh
On Fused Filament Fabrication of Polylactic Acid Composite for the Fabrication of Comminuted Fracture Monitoring Sensors

Article • Journal of The Institution of Engineers (India) Series C, February 2026, Springer Science + Business Media

Professor Rupinder Singh
On Optimization of Powder Bed Fusion-Laser Beam Process for Tunable Tensile and Flexural Strain in Cerclage Strips of 17-4 PH Stainless Steel

Article • Journal of Materials Engineering and Performance, February 2026, Springer Science + Business Media

Professor Rupinder Singh
On fumed silica-reinforced liquid silicon rubber for a novel orthotic shoe sole

Article • Materials Letters, February 2026, Elsevier

Professor Rupinder Singh
Preparation and Characterization of Polypropylene–CaCO₃ Composite Filaments as Potential Material for 3D Printing

Article • Next Research, February 2026, Elsevier

Professor Rupinder Singh
On the Design, Development, and Calibration of a 3D-Printed Implantable Diaphragmatic Hernia Sensor for Livestock

Article • Journal of Materials Engineering and Performance, January 2026, Springer Science + Business Media

Professor Rupinder Singh
On the development of PVDF-La doped ZnO composites-based strands for sensing applications

Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, December 2025, SAGE Publications

Professor Rupinder Singh
Comprehensive Investigation of Scan Strategies and Infill Patterns on the Flexural, Thermal, and Microstructural Behavior of Powder Bed Fusion-Laser Beam-Processed 17-4 PH Stainless Steel

Article • Journal of Materials Engineering and Performance, December 2025, Springer Science + Business Media

Professor Rupinder Singh
On the design and development of 3D-printed high-density polyethylene-stubble waste composite tiles with sensing capabilities

Article • Next Research, December 2025, Elsevier

Professor Rupinder Singh
Investigating strategies for the fabrication of composition gradient-based functionally graded materials processed by powder bed fusion

Article • Arabian Journal for Science and Engineering, December 2025, Springer Science + Business Media

Professor Rupinder Singh
On the Development of 3D-Printed e-Skin of Polyvinylidene Fluoride-Sm Doped ZnO Composite

Article • Journal of Materials Engineering and Performance, December 2025, Springer Science + Business Media

Professor Rupinder Singh
On La-Doped ZnO Reinforced PVDF Composite-Based Diaphragmatic Hernia Sensor for Bubalus Bubalis

Article • Journal of The Institution of Engineers (India) Series C, November 2025, Springer Science + Business Media

Professor Rupinder Singh
On the Thermo-Mechanical Characterization of Additively Manufactured Sandwich Meta-Structure-Based Functional Prototypes of 17- 4 PH Stainless Steel

Article • Journal of Materials Engineering and Performance, November 2025, Springer Science + Business Media

Professor Rupinder Singh
On Thermomechanical Properties of 17-4 PH Stainless Steel Processed by Using Laser Powder Bed Fusion: Effect of Scanning Strategies and Infill Patterns

Article • Journal of Materials Engineering and Performance, November 2025, Springer Science + Business Media

Professor Rupinder Singh
On One-Way Programming of 3D Printed PETG-Based Smart Containers for Online Health Monitoring of Food Articles

Article • National Academy Science Letters, October 2025, Springer Science + Business Media

Professor Rupinder Singh
On the pre-processing temperature of fallow primary and secondary recycled stainless steel powder for powder bed fusion

Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, September 2025, SAGE Publications

Professor Rupinder Singh
On 3D Dispenser Printing of Tertiary Recycled PVDF for Sensing Applications

Article • National Academy Science Letters, September 2025, Springer Science + Business Media

Professor Rupinder Singh
On polylactic acid-17-4 precipitate hardened stainless steel composite for fused filament fabrication of splints

Article • Advances in Materials and Processing Technologies, September 2025, Taylor & Francis

Professor Rupinder Singh
Investigations on Mechanical, Morphological, and Surface Properties of 3D Printed HDPE-SWP (Stubble Waste Powder) Composites for Structural Applications

Article • National Academy Science Letters, September 2025, Springer Science + Business Media

Professor Rupinder Singh
On the Effect of Unit Cell Dimensions in Octet Auxetic Structure Fabricated by Laser Powder Bed Fusion

Article • Journal of Materials Engineering and Performance, September 2025, Springer Science + Business Media

Professor Rupinder Singh
A decadal review of carbon-based sustainable materials: chemistry, mechanisms, and environmental applications

Article • Waste Disposal & Sustainable Energy, September 2025, Springer Science + Business Media

Professor Rupinder Singh
Digital Thread for Online Monitoring of Electrochemical Machining

Article • National Academy Science Letters, September 2025, Springer Science + Business Media

Professor Rupinder Singh
On Sensing Capability of 3D-Printed PLA Composite-Based Phagocytosis Sensors

Article • National Academy Science Letters, September 2025, Springer Science + Business Media

Professor Rupinder Singh
On 3D Printing of Polylactic Acid-17-4 Precipitate Hardened Stainless Steel Composite for Orthodontic Applications

Article • Journal of Materials Engineering and Performance, August 2025, Springer Science + Business Media

Professor Rupinder Singh
On Development and Characterization of Functionally Graded Material with Minor to Considerable Melting Temperature Variation Processed by Laser Powder Bed Fusion

Article • Journal of Materials Engineering and Performance, August 2025, Springer Science + Business Media

Professor Rupinder Singh
On Design and Development of PLA Composite-Based 3D-Printed Sensor-Embedded Cerclage Strip for Tensile Loading Applications

Article • Journal of Materials Engineering and Performance, August 2025, Springer Science + Business Media

Professor Rupinder Singh
On 3D Printing of Paraloid B72-Based Sensors for the Health Monitoring of Heritage Documents

Article • National Academy Science Letters, August 2025, Springer Science + Business Media

Professor Rupinder Singh
On the Development of Polylactic Acid-Stubble Waste Composite Filament for Rapid Tooling Applications

Article • Journal of The Institution of Engineers (India) Series C, July 2025, Springer Science + Business Media

Professor Rupinder Singh
On 3D Printed PCL-PLA Nanofibers-Based Porous Scaffolds for Tissue Engineering Applications

Article • National Academy Science Letters, July 2025, Springer Science + Business Media

Professor Rupinder Singh
On Sensing Capability Comparison of 3D Printed Cerclage Strips with Different Patch and Ground Plane Materials for Medicinal Monitoring of Comminuted Fractures

Article • National Academy Science Letters, July 2025, Springer Science + Business Media

Professor Rupinder Singh
On Fabrication of Novel Polyvinylidene Fluoride BaTiO3-Cu-Doped ZnO-Based Filament for 3D Printing of Pacemakers

Article • Journal of Materials Engineering and Performance, July 2025, Springer Science + Business Media

Professor Rupinder Singh
Some investigations on hybrid 3D printed PVDF-based functional prototypes

Article • Next Materials, July 2025, Elsevier

Professor Rupinder Singh
On PLA-based Conformal Sensors for Detecting the Recurrence of Diaphragmatic Hernia

Article • National Academy Science Letters, June 2025, Springer Science + Business Media

Professor Rupinder Singh
On Interfacial Characterization and Thermodynamic Analysis of Ni-625-17-4 PH Stainless Steel-Based Functionally Graded Material Fabricated by Laser Powder Bed Fusion

Article • Journal of The Institution of Engineers (India) Series C, June 2025, Springer Science + Business Media

Professor Rupinder Singh
On the Design and Development of a Conformal Sensor Using 3D Gel Printing of Polycaprolactone

Article • Journal of The Institution of Engineers (India) Series C, June 2025, Springer Science + Business Media

Professor Rupinder Singh
Investigating the Fixed and Moveable Partial Insulation on the Cathode in Electrochemical Machining

Article • Journal of The Institution of Engineers (India) Series C, June 2025, Springer Science + Business Media

Professor Rupinder Singh
On 3D Printed Paraloid B-72 Concealment Over Strawboard for Heritage Artefacts Preservation

Article • Journal of The Institution of Engineers (India) Series C, June 2025, Springer Science + Business Media

Professor Rupinder Singh
On Sensing Capabilities of Partially Absorbable 3D-Printed PLA Composite-Based Implant under Flexural Loading in Canine

Article • Journal of Materials Engineering and Performance, June 2025, Springer Science + Business Media

Professor Rupinder Singh
On characterization of room temperature vulcanizing-liquid silicone rubber with sensing capabilities for novel orthotic shoe sole

Article • Materials Letters, June 2025, Elsevier

Professor Rupinder Singh
Computationally Efficient Dynamic Timoshenko Beam Modeshapes for Vibration Analysis of Stiffened Plate Via Semi-analytical Approach

Article • Journal of Vibration Engineering & Technologies, May 2025, Springer Science + Business Media

Professor Rupinder Singh
Analysis of surface roughness and cutting force in WS2-Assisted MQL turning of H13 steel

Article • World Journal of Engineering, May 2025, Emerald

Professor Rupinder Singh
On 3D Printing of 17-4 PH SS Rectangular Waveguides with Laser Powder Bed Fusion

Article • National Academy Science Letters, May 2025, Springer Science + Business Media

Professor Rupinder Singh
On Machining Characteristics of Modified Electrochemical Machining with Fixed Thermoplastic Cathode Cap for Partial Insulation

Article • National Academy Science Letters, May 2025, Springer Science + Business Media

Professor Rupinder Singh
On Compressive Properties of 3D-Printed High-Density Polyethylene–Stubble Waste Composite Tiles

Article • Journal of Materials Engineering and Performance, May 2025, Springer Science + Business Media

Professor Rupinder Singh
On design, fabrication, and pre-clinical validation of customized 3D-printed dental implant assembly

Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, May 2025, SAGE Publications

Professor Rupinder Singh
On Primary Recycled Dual Polymer-Based 3D Printed Functional Prototypes

Article • Journal of The Institution of Engineers (India) Series C, April 2025, Springer Science + Business Media

Professor Rupinder Singh
On the Fabrication of Functionally Graded Prototypes with Laser Powder Bed Fusion from Reused Ni-625 and 17-4 PH Stainless Steel Powder

Article • Journal of Materials Engineering and Performance, April 2025, Springer Science + Business Media

Professor Rupinder Singh
On Novel 3D-Printed Polylactic Acid Composite Matrix for Condition Monitoring of Comminuted Fractures

Article • Journal of Materials Engineering and Performance, March 2025, Springer Science + Business Media

Professor Rupinder Singh
On 3D Printing of Secondary Recycled Polypropylene for Automotive Parts under Different Wear Conditions

Article • Journal of Materials Engineering and Performance, February 2025, Springer Science + Business Media

Professor Rupinder Singh
On the Development of a Novel PLA Composite Matrix with Sensing Capabilities for Partially Absorbable Cerclage Strips

Article • Journal of Materials Engineering and Performance, February 2025, Springer Science + Business Media

Professor Rupinder Singh
On 4D Capabilities of Polycaprolactone Composite Matrix

Article • National Academy Science Letters, January 2025, Springer Science + Business Media

Professor Rupinder Singh
On successive recycling of acrylonitrile butadiene styrene- melamine formaldehyde composite for sensing applications

Article • Journal of Thermoplastic Composite Materials, January 2025, SAGE Publications

Professor Rupinder Singh
On the design and fabrication of polyvinylidene fluoride-based sensors to detect recurrence of diaphragmatic hernia

Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, December 2024, SAGE Publications

Professor Rupinder Singh
On 3D-Printed Cutting Boards of High-Density Polyethylene-Stubble Waste Composites with Improved Wear Properties

Article • Journal of The Institution of Engineers (India) Series C, December 2024, Springer Science + Business Media

Professor Rupinder Singh
On secondary recycling of high-density polyethylene with reinforcement of stubble powder by a material extrusion process for construction applications

Article • Journal of Thermoplastic Composite Materials, December 2024, SAGE Publications

Professor Rupinder Singh
On 3D Printed Sandwich Meta-structures for Improved Wear Characteristics

Article • Journal of The Institution of Engineers (India) Series C, December 2024, Springer Science + Business Media

Professor Rupinder Singh
On Prominent β-Phase of PVDF Matrix with 4D Capabilities

Article • Journal of The Institution of Engineers (India) Series C, December 2024, Springer Science + Business Media

Professor Rupinder Singh
On modes of electrochemical machining: a comprehensive review

Article • Advances in Materials and Processing Technologies, December 2024, Taylor & Francis

Professor Rupinder Singh
3D Printing of Thermoplastic Polyurethane on Woven Fabric for Body-Centric Applications

Article • National Academy Science Letters, November 2024, Springer Science + Business Media

Professor Rupinder Singh
On design and fabrication of 3D printed stifle prosthetic implant

Article • Sadhana, November 2024, Springer Science + Business Media

Professor Rupinder Singh
Fabrication of Resonance Frequency-Based Sensors for Safeguarding Heritage Documents

Article • National Academy Science Letters, October 2024, Springer Science + Business Media

Professor Rupinder Singh
On 3D Dispenser Printing of MnO2 Reinforced PVDF Matrix for Recycling of Dry Cell

Article • Journal of The Institution of Engineers (India) Series C, October 2024, Springer Science + Business Media

Professor Rupinder Singh
On Digital Twinning of 3D Printed PETG-Based Smart Containers for Health Monitoring of Food Articles

Article • Journal of The Institution of Engineers (India) Series C, October 2024, Springer Science + Business Media

Professor Rupinder Singh
On the Use of 17-4 Precipitate Hardened Stainless Steel Waste Powder for 3D Printing of Implants with Tuneable Stress Shielding Capabilities

Article • Journal of Materials Engineering and Performance, September 2024, Springer Science + Business Media

Professor Rupinder Singh
3D printed hernia mesh implant: a conformability study

Article • September 2024, Open Exploration Publishing

Professor Rupinder Singh
On 3D printed polyvinylidene fluoride composite-based diaphragmatic hernia sensors

Article • Journal of Thermoplastic Composite Materials, September 2024, SAGE Publications

Professor Rupinder Singh
Investigations on 3D Printed Novel Stifel Prosthesis as IoT-Based Solution

Article • National Academy Science Letters, September 2024, Springer Science + Business Media

Professor Rupinder Singh
On the Recycled Acrylonitrile Butadiene Styrene Composite Filaments with Tuneable Thermo-Mechanical Properties

Article • National Academy Science Letters, September 2024, Springer Science + Business Media

Professor Rupinder Singh
3D-printed passive sensors on fabric: a state-of-the-art review and framework for future applications

Article • Advances in Materials and Processing Technologies, September 2024, Taylor & Francis

Professor Rupinder Singh
On the Tertiary Recycling of PVDF Composite Matrix by 3D Dispenser Printing

Article • Journal of The Institution of Engineers (India) Series C, September 2024, Springer Science + Business Media

Professor Rupinder Singh
On Machining Profile Accuracy in the Modified Electrochemical Machining Process

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, August 2024, Springer Science + Business Media

Professor Rupinder Singh
Investigations of Melt Flow Behavior of Aluminium Metal Particle-Reinforced HDPE Composites

Article • Journal of Molecular and Engineering Materials, August 2024, World Scientific Pub Co Pte Lt

Professor Rupinder Singh
Unlocking the Impact of “Cell Position” on Solid‐State Hydrogen Storage: Investigations on an Activated Carbon Electrode Integrated in a Modified Reversible Polymer Electrolyte Membrane Fuel Cell

Article • Energy Technology, August 2024, Wiley

Professor Rupinder Singh
On 17-4PH stainless steel dental implant for premolar 4 in canine under compressive loading: effect of solid and octet metastructure

Article • August 2024, Open Exploration Publishing

Professor Rupinder Singh
On the characterization of 3D-printed diaphragmatic hernia sensor for health monitoring of bovine: FEA, morphological, and in vitro analysis

Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, August 2024, Springer Science + Business Media

Professor Rupinder Singh
On electrochemical machining with an interelectrode slit for a partially insulating cathode

Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, August 2024, SAGE Publications

Professor Rupinder Singh
On Processing of Waste Polyethylene Terephthalate Glycol for Sensory Applications

Article • Journal of The Institution of Engineers (India) Series C, July 2024, Springer Science + Business Media

Professor Rupinder Singh
Effect of Preprocessing Temperature On the Recycling of Waste Direct Metal Laser Sintering Powder

Article • Transactions of the Indian Institute of Metals, July 2024, Springer Science + Business Media

Professor Rupinder Singh
On Fused Filament Fabrication of Novel Tape Bandages as Phagocytosis Sensor: Effect of SiC Particle Size in PLA Matrix

Article • Journal of The Institution of Engineers (India) Series C, July 2024, Springer Science + Business Media

Professor Rupinder Singh
On Dynamic Reduced Order Model for the Flexural Characteristics of Polyvinylidene Fluoride Composite-Based Functional Prototypes

Article • Journal of Materials Engineering and Performance, July 2024, Springer Science + Business Media

Professor Rupinder Singh
On fused filament fabrication of PLA nanofiber reinforced PCL matrix-based smart porous scaffolds

Article • Materials Letters, July 2024, Elsevier

Professor Rupinder Singh
On the recycling of PVDF-reinforced graphite by using 3D gel printing

Article • Materials Letters, July 2024, Elsevier

Professor Rupinder Singh
Impact of texture cutting tools on sustainable machining methods: a review

Article • International Journal on Interactive Design and Manufacturing (IJIDeM), June 2024, Springer Science + Business Media

Professor Rupinder Singh
Bio-materials for intramedullary pin application in canine femur: a comparative analysis

Article • June 2024, Open Exploration Publishing

Professor Rupinder Singh
On 3D printed thermoresponsive PCL-PLA nanofibers based architected smart nanoporous scaffolds for tissue reconstruction

Article • Journal of Manufacturing Processes, June 2024, Elsevier

Professor Rupinder Singh
3D-printed conformal sensors for health monitoring of bovine post diaphragmatic hernia surgery: a review

Article • Rapid Prototyping Journal, April 2024, Emerald

Professor Rupinder Singh
On the Use of Recycled Blended Metallic Powder in the Direct Metal Laser Sintering

Article • Journal of The Institution of Engineers (India) Series C, April 2024, Springer Science + Business Media

Professor Rupinder Singh
On Comparison of Conventional and Modified Electrochemical Machining

Article • Journal of The Institution of Engineers (India) Series C, April 2024, Springer Science + Business Media

Professor Rupinder Singh
On the Modified Electrochemical Machining Process with a Partially Insulating Cathode

Article • Journal of The Institution of Engineers (India) Series C, April 2024, Springer Science + Business Media

Professor Rupinder Singh
Effect of meta-structure on mechanical properties of polyvinylidene fluoride composite-based 3D printed intramedullary pins

Article • Journal of Thermoplastic Composite Materials, February 2024, SAGE Publications

Professor Rupinder Singh
On 3D printed novel stifle prosthesis for canines

Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, January 2024, SAGE Publications

Professor Rupinder Singh
On design and fabrication of meta structure-based dual alloys by direct metal laser sintering

Article • January 2024, American Institute of Physics

Dr CHANDER PRAKASH, Professor Rupinder Singh
A statistical approach for surgical planning of canine femur bone fracture fixation using 3D printing

Article • January 2024, American Institute of Physics

Professor Rupinder Singh
On assembly features and process capability analysis of direct metal laser sintering based functional prototypes

Article • January 2024, American Institute of Physics

Professor Rupinder Singh
Mechanically sustainable and primary recycled thermo-responsive ABS–PLA polymer composites for 4D printing applications: Fabrication and studies

Article • REVIEWS ON ADVANCED MATERIALS SCIENCE, January 2024, De Gruyter

Professor Rupinder Singh
On 3D printing of canine femur bone models

Article • International Journal on Interactive Design and Manufacturing (IJIDeM), December 2023, Springer Science + Business Media

Professor Rupinder Singh
Effect of autoclaving on the dimensional stability and surface characteristics of 3D printed PVDF composite-based implants

Article • Journal of Thermoplastic Composite Materials, December 2023, SAGE Publications

Professor Rupinder Singh
On 3D printed intelligent diaphragmatic hernia sensor

Article • Rapid Prototyping Journal, November 2023, Emerald

Professor Rupinder Singh
On Secondary Recycling of PVDF for 3D Printing of Functional Sensors: Mechanical, Flow, Thermal, and Dielectric Properties

Article • National Academy Science Letters, November 2023, Springer Science + Business Media

Professor Rupinder Singh
Investigating the torsional characteristics of 3D printed polyvinylidene fluoride composite

Article • Journal of Thermoplastic Composite Materials, November 2023, SAGE Publications

Professor Rupinder Singh
On digital twinning of fused filament fabrication for tensile properties of polyvinylidene fluoride composites-based functional prototypes

Article • Journal of Thermoplastic Composite Materials, October 2023, SAGE Publications

Professor Rupinder Singh
On 3D Printing of Functionally Graded Implants Using Two Different Metallic Powder-Based Alloys

Article • National Academy Science Letters, October 2023, Springer Science + Business Media

Professor Rupinder Singh
On 3D printing of thermoplastic polyurethane over woven fabric for wearable sensors

Article • Advances in Materials and Processing Technologies, October 2023, Taylor & Francis

Professor Rupinder Singh
On 3D printed polyvinylidene fluoride-based smart energy storage devices

Article • Journal of Thermoplastic Composite Materials, October 2023, SAGE Publications

Professor Rupinder Singh
On Tertiary Recycling of PVDF with Reinforcement of Waste Dry Cell Components

Article • National Academy Science Letters, October 2023, Springer Science + Business Media

Professor Rupinder Singh
On Novel 3D-Printed Diaphragmatic Hernia Solution for Bubalus bubalis

Article • Journal of Materials Engineering and Performance, October 2023, Springer Science + Business Media

Professor Rupinder Singh
On biodegradability of 3D printed polyvinylidene fluoride composites

Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, October 2023, SAGE Publications

Professor Rupinder Singh
On Direct Metal Laser Sintering of Functionally Graded Material with Virgin and Mixed Powder

Article • Arabian Journal for Science and Engineering, October 2023, Springer Science + Business Media

Professor Rupinder Singh
On comparison of sensing capabilities of three-dimensional printed wearable sensors

Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, September 2023, SAGE Publications

Professor Rupinder Singh
On Mechanical Properties of 3D-Printed Secondary Recycled Acrylonitrile Butadiene Styrene Composite for Silencer Application in Short-Range Gun

Article • Journal of Materials Engineering and Performance, September 2023, Springer Science + Business Media

Professor Rupinder Singh
On compressive properties of 3D printed polyvinylidene fluoride composite for implant applications

Article • Journal of Thermoplastic Composite Materials, September 2023, SAGE Publications

Professor Rupinder Singh
On Morphological and Dimensional Characteristics of Modified Electrochemical Machining

Article • Journal of The Institution of Engineers (India) Series C, September 2023, Springer Science + Business Media

Professor Rupinder Singh
PVDF Composite as the 4D Solution For Heritage Structures

Article • Journal of The Institution of Engineers (India) Series C, September 2023, Springer Science + Business Media

Professor Rupinder Singh
ABS-PLA-Al composite for digital twinning of heritage buildings

Article • Materials Letters, September 2023, Elsevier

Professor Rupinder Singh
On electrospun PLA nanofibers for bio-sensing applications

Article • Manufacturing Letters, September 2023, Elsevier

Professor Rupinder Singh
On Secondary Recycling of the Domestic Thermoplastic Waste with Reinforcement of Aluminum Powder

Article • National Academy Science Letters, August 2023, Springer Science + Business Media

Professor Rupinder Singh
On Fracture Mechanism of 3D Printed Nanofiber-Reinforced PLA Matrix

Article • National Academy Science Letters, August 2023, Springer Science + Business Media

Professor Rupinder Singh
On investigation of flexural, morphological, and shape memory properties for 3D printed PLA-PVDF NFs-PLA interleave composite structures for smart gripper applications

Article • Journal of Thermoplastic Composite Materials, August 2023, SAGE Publications

Professor Rupinder Singh
3D Printed Thermoplastic Composite-Based Innovative Solutions for Heritage Structures: A Review on Technology to Application

Article • Journal of The Institution of Engineers (India) Series C, July 2023, Springer Science + Business Media

Professor Rupinder Singh
A Review on 3D Printing of Partially Absorbable Implants

Article • Journal of The Institution of Engineers (India) Series C, July 2023, Springer Science + Business Media

Professor Rupinder Singh
Investigations on the use of different electrolytes in modified electrochemical machining

Article • July 2023, Springer Science + Business Media

Professor Rupinder Singh
On 3D Printed Flexible and Wearable Sensors from Primary Recycled PVDF

Article • National Academy Science Letters, June 2023, Springer Science + Business Media

Professor Rupinder Singh
On Hybrid Additive Manufacturing of PLA-PVDF Nanofiber-Based Sandwiched Composites for Self-Folding Structures

Article • Journal of Materials Engineering and Performance, June 2023, Springer Science + Business Media

Professor Rupinder Singh
A Systematic Review of Different Categories of Plant Disease Detection Using Deep Learning-Based Approaches

Article • Archives of Computational Methods in Engineering, June 2023, Springer Science + Business Media

Professor Rupinder Singh
On 3D Printing of PVDF Composite- Based Sensors for Biomedical Applications

Article • National Academy Science Letters, June 2023, Springer Science + Business Media

Professor Rupinder Singh
Hybrid additive manufacturing of highly sustainable Polylactic acid -Carbon Fiber-Polylactic acid sandwiched composite structures: Optimization and machine learning

Article • Journal of Thermoplastic Composite Materials, May 2023, SAGE Publications

Professor Rupinder Singh
Investigation on 3D Printed PVDF–SiC Composites for Phagocytosis Sensor Application

Article • National Academy Science Letters, May 2023, Springer Science + Business Media

Professor Rupinder Singh
On 3D-Printed Sandwich Strips of PLA–PLA Nanofibers for One-Way Programming

Article • National Academy Science Letters, May 2023, Springer Science + Business Media

Professor Rupinder Singh
On Multi-layered PVDF Composite-Based 3D-Printed Solution for Repair of Non-structural Cracks in Heritage Buildings

Article • National Academy Science Letters, May 2023, Springer Science + Business Media

Professor Rupinder Singh
On 3D Printing of Architected PLA-PLA Nanofiber-Based Biomedical Scaffolds

Article • National Academy Science Letters, May 2023, Springer Science + Business Media

Professor Rupinder Singh
Investigations and predictions for mechanical and surface properties of FFF prints using DOE, ML and FEA

Article • Advances in Materials and Processing Technologies, April 2023, Taylor & Francis

Professor Rupinder Singh
On PVDF composite as partially absorbable smart implants

Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, March 2023, SAGE Publications

Professor Rupinder Singh
On Dy+3 Nobbled ZnO-Reinforced PVDF for Flexible Optical Sensor

Article • Journal of The Institution of Engineers (India) Series C, February 2023, Springer Science + Business Media

Professor Rupinder Singh
On 3D Printing of Primary Recycled Polyvinylidene-Fluoride-Based Miniaturized, Flexible, and Wearable Sensor

Article • Journal of Materials Engineering and Performance, February 2023, Springer Science + Business Media

Professor Rupinder Singh
On Comparison of 3D-Printed ABS and PVDF-Based Sensors for Body-Centric Utility

Article • Arabian Journal for Science and Engineering, February 2023, Springer Science + Business Media

Professor Rupinder Singh
On Debris Reinforced-PVDF, Composite-Based 3D Printed Sensors for Restoration of Heritage Building

Article • National Academy Science Letters, February 2023, Springer Science + Business Media

Professor Rupinder Singh
3D Printed Meta-structure-Inspired Sensors of PVDF–Graphene–Mn-Doped ZnO for Heritage Structures

Article • National Academy Science Letters, January 2023, Springer Science + Business Media

Professor Rupinder Singh
On Tribological and In-vitro Analysis of Meta-Structure-Based 3D Printed Horse Hoof Strap

Article • National Academy Science Letters, January 2023, Springer Science + Business Media

Professor Rupinder Singh
Mechanical investigations on secondary recycled ABS-based composite multi-layered tensile and flexural specimens prepared by fused filament fabrication

Article • Progress in Additive Manufacturing, January 2023, Springer Science + Business Media

Professor Rupinder Singh
Three-dimensional printed thermoplastic polyurethane on fabric as wearable smart sensors

Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, January 2023, SAGE Publications

Professor Rupinder Singh
Innovative thermoplastic slit profiles for electrochemical machining

Article • International Journal on Interactive Design and Manufacturing (IJIDeM), January 2023, Springer Science + Business Media

Professor Rupinder Singh
On Surface Features of Canine Strategic Teeth by Metal Additive Manufacturing and Investment Casting—A Comparative Study

Article • January 2023, Springer Science + Business Media

Professor Rupinder Singh
3D-printed PETG-based Smart Containers for Online Health Monitoring of Food Articles

Article • National Academy Science Letters, December 2022, Springer Science + Business Media

Professor Rupinder Singh
Pattern Development for Manufacturing Applications with Fused Deposition Modelling – A Case Study

Article • International Journal of Automotive and Mechanical Engineering, December 2022, Universiti Malaysia Pahang Publisher

Professor Rupinder Singh
Comparison of Polyjet Printing and Silicon Moulding as Rapid Plastic Moulding Solution

Article • International Journal of Automotive and Mechanical Engineering, December 2022, Universiti Malaysia Pahang Publisher

Professor Rupinder Singh
Comparison of Cryo-treatment Effect on Machining Characteristics of Titanium in Electric Discharge Machining

Article • International Journal of Automotive and Mechanical Engineering, December 2022, Universiti Malaysia Pahang Publisher

Professor Rupinder Singh
On Meta-structure Inspired 3D Printing of Dual Alloys Using DMLS

Article • National Academy Science Letters, December 2022, Springer Science + Business Media

Professor Rupinder Singh
On 3D printing of low-cost sensors using recycled PET

Article • Sadhana, November 2022, Springer Science + Business Media

Professor Rupinder Singh
On 3D printed meta-structure-based functional prototype as an innovative solution for repair and online health monitoring of heritage structures

Article • Materials Letters, November 2022, Elsevier

Professor Rupinder Singh
On the development of meta-structure-based conformal sensors for biomedical applications

Article • Journal of Manufacturing Processes, November 2022, Elsevier

Professor Rupinder Singh
Online health monitoring of repaired non-structural cracks with innovative 3D printed strips in heritage buildings

Article • Materials Letters, November 2022, Elsevier

Professor Rupinder Singh
On Techno-economic Aspect of Dental Crown Fabrication by DMLS and Investment Casting for Veterinary Application

Article • October 2022, Springer Science + Business Media

Professor Rupinder Singh
3D printed sensor for online condition monitoring of energy storage device

Article • Sadhana, October 2022, Springer Science + Business Media

Professor Rupinder Singh
Bee-safe peptidomimetic acaricides achieved by comparative genomics

Article • Scientific Reports, October 2022, Springer Science + Business Media

Professor Rupinder Singh
3D printed innovative customized solution for regulating weathering effect on heritage structures

Article • Materials Letters, October 2022, Elsevier

Professor Rupinder Singh
Comparison of DMLS and DMLS-waste assisted investment casting

Article • Materials Letters, October 2022, Elsevier

Professor Rupinder Singh
Effect of Infill Density on the Performance of Recycled PET-Based 3D Printed Microstrip Antenna

Article • National Academy Science Letters, September 2022, Springer Science + Business Media

Professor Rupinder Singh
4D printing of thermoresponsive materials: a state-of-the-art review and prospective applications

Article • International Journal on Interactive Design and Manufacturing (IJIDeM), September 2022, Springer Science + Business Media

Professor Rupinder Singh
Additive Manufacturing Assisted Preoperative Surgical Planning for Canine Femur Bone Fracture

Article • National Academy Science Letters, September 2022, Springer Science + Business Media

Professor Rupinder Singh
On 3D printing of customized multi-root dental implants for the strategic tooth of canine by direct metal laser sintering

Article • Rapid Prototyping Journal, August 2022, Emerald

Professor Rupinder Singh
On failure analysis of three-dimensional printed functionally graded material prepared by direct metal laser sintering

Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, August 2022, SAGE Publications

Professor Rupinder Singh
Comparison of Recycled ABS Composite Filaments Prepared by Different Blending Routes

Article • National Academy Science Letters, August 2022, Springer Science + Business Media

Professor Rupinder Singh
Partially Absorbable 3D Printed Innovative Orthopedic Implants

Article • National Academy Science Letters, August 2022, Springer Science + Business Media

Professor Rupinder Singh
On mechanically recycled PLA-HAP-CS-based filaments for 3D printing of smart biomedical scaffolds

Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, August 2022, Springer Science + Business Media

Professor Rupinder Singh
On pre and post-processing parameters of FDM for the development of crowns for strategic teeth of canines

Article • Sadhana, August 2022, Springer Science + Business Media

Professor Rupinder Singh
Investigations on 3D printed primary recycled ABS for one-way programming

Article • Advances in Materials and Processing Technologies, August 2022, Taylor & Francis

Professor Rupinder Singh
On Mechanical, Thermal, Morphological, and 4D Capabilities of Polyvinylidene Fluoride Nanocomposites: Effect of Mechanical and Chemical-Assisted Mechanical Blending

Article • Journal of Materials Engineering and Performance, August 2022, Springer Science + Business Media

Professor Rupinder Singh
3D Printing Assisted Investment Casting of Dental Crowns for Recycling of DMLS Waste

Article • Arabian Journal for Science and Engineering, August 2022, Springer Science + Business Media

Professor Rupinder Singh
Multi-material printing of PVDF composites: A customized solution for maintenance of heritage structures

Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, August 2022, SAGE Publications

Professor Rupinder Singh
On 3D printing of dental crowns with direct metal laser sintering for canine

Article • Journal of Mechanical Science and Technology, July 2022, Springer Science + Business Media

Professor Rupinder Singh
On pre and post-processing of 3D printed ABS thermoplastic sacrificial pattern for strategic dog teeth

Article • Progress in Additive Manufacturing, July 2022, Springer Science + Business Media

Professor Rupinder Singh
3D Printed Flame Retardant, ABS-C4H8N6O Composite as Energy Storage Device

Article • Arabian Journal for Science and Engineering, July 2022, Springer Science + Business Media

Professor Rupinder Singh
On twin screw extrusion parametric optimisation using hybrid approach of ANOVA and TOPSIS for 3D printing applications

Article • Advances in Materials and Processing Technologies, June 2022, Taylor & Francis

Professor Rupinder Singh
Intramedullary pin fixation in 3D printed canine femur bone model for preoperative surgical planning

Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, June 2022, Springer Science + Business Media

Professor Rupinder Singh
On the use of thermoplastic composite slit as a guide for ECM

Article • Sadhana, June 2022, Springer Science + Business Media

Professor Rupinder Singh
Secondary recycled polyvinylidene–limestone composite in 4D printing applications for heritage structures: Rheological, thermal, mechanical, spectroscopic, and morphological analysis

Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, June 2022, SAGE Publications

Professor Rupinder Singh
Investigations on Primary and Secondary Recycling of PLA and its Composite for Biomedical and Sensing Applications

Article • Journal of The Institution of Engineers (India) Series C, June 2022, Springer Science + Business Media

Professor Rupinder Singh
On chemical assisted blending of secondary recycled ABS with bakelite and wood dust for fused filament fabrication

Article • Advances in Materials and Processing Technologies, June 2022, Taylor & Francis

Professor Rupinder Singh
State of the art review on the sustainable dry machining of advanced materials for multifaceted engineering applications: progressive advancements and directions for future prospects

Article • Materials Research Express, June 2022, Institute of Physics Publishing

Dr. RAJKUMAR SIVANRAJU, Professor Rupinder Singh
On 3D printed biomedical sensors for non-enzymatic glucose sensing applications

Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, May 2022, SAGE Publications

Professor Rupinder Singh
Multi-stage Primary and Secondary Recycled PLA Composite Matrix for 3D Printing Applications

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, April 2022, Springer Science + Business Media

Professor Rupinder Singh
On 3D-Printed Acrylonitrile Butadiene Styrene-Based Sensors: Rheological, Mechanical, Morphological, Radio Frequency, and 4D Capabilities

Article • Journal of Materials Engineering and Performance, April 2022, Springer Science + Business Media

Professor Rupinder Singh
On Almond Skin Powder Reinforced PA6 Composite for 3D Printing Applications

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, April 2022, Springer Science + Business Media

Professor Rupinder Singh
Predictive modeling of surface and dimensional features of vapour-smoothened FDM parts using self-adaptive cuckoo search algorithm

Article • Progress in Additive Manufacturing, March 2022, Springer Science + Business Media

Professor Rupinder Singh
Ecdysis triggering hormone peptide in the African malaria mosquito Anopheles gambiae: The peptide structure for receptor activation

Article • Insect Science, February 2022, Wiley

Professor Rupinder Singh
On Rheological, Thermal, Mechanical, Morphological, and Piezoelectric Properties and One-Way Programming Features of Polyvinylidene Fluoride–CaCO3 Composites

Article • Journal of Materials Engineering and Performance, January 2022, Springer Science + Business Media

Professor Rupinder Singh
Title page

Article • January 2022, Elsevier

Professor Rupinder Singh
Comparison of EDM and ECM machined AISI 304 steel: Surface roughness, hardness and morphological characteristics

Article • Materials Today Proceedings, January 2022, Elsevier

Professor Rupinder Singh
On 3D printing of PA6-10% almond skin powder reinforced composite

Article • Materials Today Proceedings, January 2022, Elsevier

Professor Rupinder Singh
On process modelling of cold chamber die casting of Al alloy by using buckingham’s Π approach

Article • Materials Today Proceedings, January 2022, Elsevier

Professor Rupinder Singh
Comparison of Ni-Cr based partial dentures prepared by thermoplastic and wax based investment casting: Mechanical, morphological and in-vitro analysis

Article • Materials Today Proceedings, January 2022, Elsevier

Professor Rupinder Singh
Effect of processing parameters on mechanical properties of FDM filament prepared on single screw extruder

Article • Materials Today Proceedings, January 2022, Elsevier

Professor Rupinder Singh
Investigations on flexural strength of multi-material ABS based composite specimen fabricated through FDM technique

Article • Materials Today Proceedings, January 2022, Elsevier

Professor Rupinder Singh
Investigations on mechanical properties of secondary recycled ABS reinforced with Fe powder for 3D printing applications

Article • Materials Today Proceedings, January 2022, Elsevier

Professor Rupinder Singh
On 4D capabilities of chemical assisted mechanical blended ABS-nano graphene composite matrix

Article • Materials Today Proceedings, January 2022, Elsevier

Professor Rupinder Singh
On development of correlation matrix for tuning of machining characteristics in modified ECM

Article • Materials Today Proceedings, January 2022, Elsevier

Professor Rupinder Singh
On comparison of recycled LDPE and LDPE–bakelite composite based 3D printed patch antenna

Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, December 2021, SAGE Publications

Professor Rupinder Singh
On 3D printing of electro-active PVDF-Graphene and Mn-doped ZnO nanoparticle-based composite as a self-healing repair solution for heritage structures

Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, November 2021, SAGE Publications

Professor Rupinder Singh
On programming of polyvinylidene fluoride–limestone composite for four-dimensional printing applications in heritage structures

Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, November 2021, SAGE Publications

Professor Rupinder Singh
On polyvinyl chloride-polypropylene composite matrix for 4D applications: Flowability, mechanical, thermal and morphological characterizations

Article • Journal of Thermoplastic Composite Materials, November 2021, SAGE Publications

Professor Rupinder Singh
On three-dimensional printing of 17-4 precipitation-hardenable stainless steel with direct metal laser sintering in aircraft structural applications

Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, November 2021, SAGE Publications

Professor Rupinder Singh
Modelling and optimization of tractor ride conditions under water tanker operation

Article • Theoretical Issues in Ergonomics Science, October 2021, Taylor & Francis

Dr CHANDER PRAKASH, Professor Rupinder Singh
On Mechanical, Thermal, Morphological and Shape Memory Effect of Sol-Gel Prepared ZnO Nanoparticle Reinforced PLA Composites Materials

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, October 2021, Springer Science + Business Media

Professor Rupinder Singh
On synergistic effect of BaTiO3 and graphene reinforcement in polyvinyl diene fluoride matrix for four dimensional applications

Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, September 2021, SAGE Publications

Professor Rupinder Singh
On shear fracture and morphological features of fused filament fabrication based almond skin reinforced PLA structures

Article • Advances in Materials and Processing Technologies, September 2021, Taylor & Francis

Professor Rupinder Singh
Three-Dimensional Printing of Innovative Intramedullary Pin Profiles with Direct Metal Laser Sintering

Article • Journal of Materials Engineering and Performance, September 2021, Springer Science + Business Media

Professor Rupinder Singh
On flexural and pull out properties of smart polymer based 3D printed functional prototypes

Article • Sadhana, September 2021, Springer Science + Business Media

Professor Rupinder Singh
On crown fabrication in prosthetic dentistry of veterinary patients: a review

Article • Advances in Materials and Processing Technologies, August 2021, Taylor & Francis

Professor Rupinder Singh
On flexural, wear and morphological properties of 3D printed almond skin powder reinforced PLA matrix

Article • Advances in Materials and Processing Technologies, August 2021, Taylor & Francis

Professor Rupinder Singh
Evaluation of machinability-based sustainability indicators in the eco-benign turning of Ti3Al2.5V alloy with textured tools

Article • The International Journal of Advanced Manufacturing Technology, July 2021, Springer Science + Business Media

Professor Rupinder Singh
On decision making of reinforcement proportion in thermoplastic matrix based upon rheological properties: An overview

Article • Advances in Materials and Processing Technologies, July 2021, Taylor & Francis

Professor Rupinder Singh
Rheological, mechanical, thermal, tribological and morphological properties of PLA-PEKK-HAp-CS composite

Article • Journal of Central South University, June 2021, Springer Science + Business Media

Professor Rupinder Singh
Investigation on mechanical, tribological and microstructural properties of Al–Mg–Si–T6/SiC/muscovite-hybrid metal-matrix composites for high strength applications

Article • Journal of Materials Research and Technology, May 2021, Elsevier

Professor Rupinder Singh
Characterization of in-House-Developed Mn-ZnO-Reinforced Polyethylene: A Sustainable Approach for Developing Fused Filament Fabrication-Based Filament

Article • Journal of Materials Engineering and Performance, April 2021, Springer Science + Business Media

Dr CHANDER PRAKASH, Professor Rupinder Singh
On correlation of rheological, thermal, mechanical and morphological properties of chemical assisted mechanically blended ABS-Graphene composite as tertiary recycling for 3D printing applications

Article • Advances in Materials and Processing Technologies, April 2021, Taylor & Francis

Professor Rupinder Singh
Multi-material 3D printed PLA/PA6-TiO2 composite matrix: rheological, thermal, tensile, morphological and 4D capabilities

Article • Advances in Materials and Processing Technologies, April 2021, Taylor & Francis

Professor Rupinder Singh
On shear resistance of almond skin reinforced PLA composite matrix-based scaffold using cancellous screw

Article • Advances in Materials and Processing Technologies, April 2021, Taylor & Francis

Professor Rupinder Singh
On recyclability of thermoplastic ABS polymer as fused filament for FDM technique of additive manufacturing

Article • World Journal of Engineering, April 2021, Emerald

Professor Rupinder Singh
A review on cutting fluids used in machining processes

Article • Engineering Research Express, March 2021, Institute of Physics Publishing

Professor Rupinder Singh
Tribological behavior of textured tools in sustainable turning of nickel based super alloy

Article • Tribology International, March 2021, Elsevier

Professor Rupinder Singh
Heat Transfer Efficiency of Cryogenic-LN2 and CO2-snow and their application in the Turning of Ti-6AL-4V

Article • International Journal of Heat and Mass Transfer, February 2021, Elsevier

Professor Rupinder Singh
On Mn doped ZnO nano particles reinforced in PVDF matrix for fused filament fabrication: Mechanical, thermal, morphological and 4D properties

Article • Journal of Manufacturing Processes, February 2021, Elsevier

Professor Rupinder Singh
On Nanographene-Reinforced Polyvinylidene Fluoride Composite Matrix for 4D Applications

Article • Journal of Materials Engineering and Performance, January 2021, Springer Science + Business Media

Professor Rupinder Singh
3D printed scaffolds for tissue engineering applications: Mechanical, morphological, thermal, in-vitro and in-vivo investigations

Article • CIRP Journal of Manufacturing Science and Technology, January 2021, Elsevier

Professor Rupinder Singh
3D printed tensile and flexural prototypes of thermoplastic matrix reinforced with multi-materials: A statistical analysis

Article • Materials Today Proceedings, January 2021, Elsevier

Professor Rupinder Singh
Minimum quantity lubrication turning of hard to cut materials – A review

Article • Materials Today Proceedings, January 2021, Elsevier

Professor Rupinder Singh
Progress of environment friendly cutting fluids/solid lubricants in turning-A review

Article • Materials Today Proceedings, January 2021, Elsevier

Professor Rupinder Singh
On ZnO nano particle reinforced PVDF composite materials for 3D printing of biomedical sensors

Article • Journal of Manufacturing Processes, December 2020, Elsevier

Professor Rupinder Singh
Evaluating the sustainability pillars of energy and environment considering carbon emissions under machining ofTi-3Al-2.5 V

Article • Sustainable Energy Technologies and Assessments, December 2020, Elsevier

Professor Rupinder Singh
Thermo-mechanical investigations for the joining of thermoplastic composite structures via friction stir spot welding

Article • Composite Structures, December 2020, Elsevier

Professor Rupinder Singh
Fused filament fabrication: A comprehensive review

Article • Journal of Thermoplastic Composite Materials, November 2020, SAGE Publications

Professor Rupinder Singh
Investigations and mathematical modelling using dimensionless analysis for hardness of SS-316L implants fabricated for batch production through rapid investment casting

Article • Advances in Materials and Processing Technologies, November 2020, Taylor & Francis

Professor Rupinder Singh
Mechanical characterization of FDM filaments with PVDF matrix reinforced with Graphene and Barium Titanate

Article • IOP Conference Series Materials Science and Engineering, November 2020, Institute of Physics Publishing

Professor Rupinder Singh
Thermomechanical and morphological properties of sustainable mortars employing blast furnace slag and fly ash reinforced cement

Article • IOP Conference Series Materials Science and Engineering, November 2020, Institute of Physics Publishing

Professor Rupinder Singh
Investigations for surface roughness and dimensional accuracy of biomedical implants prepared by combining fused deposition modelling, vapour smoothing and investment casting

Article • Advances in Materials and Processing Technologies, October 2020, Taylor & Francis

Professor Rupinder Singh
Manufacturing techniques and applications of polymer matrix composites: a brief review

Article • Advances in Materials and Processing Technologies, October 2020, Taylor & Francis

Professor Rupinder Singh
Rapid tooling through micro additive manufacturing with reinforcement of SiC/Al2O3 in LDPE domestic waste

Article • Advances in Materials and Processing Technologies, October 2020, Taylor & Francis

Professor Rupinder Singh
Friction-stir-spot welding of 3D printed ABS and PA6 composites: flexural, thermal and morphological investigations

Article • Advances in Materials and Processing Technologies, October 2020, Taylor & Francis

Professor Rupinder Singh
Polymer- Ceramic composites: A state of art review and future applications

Article • Advances in Materials and Processing Technologies, October 2020, Taylor & Francis

Professor Rupinder Singh
Comparison of Cold and Hot Forged EN8 Flats: Spring Back Effect, Surface Hardness and Microstructural Features

Article • Transactions of the Indian Institute of Metals, September 2020, Springer Science + Business Media

Professor Rupinder Singh
Multi material 3D printing of PLA-PA6/TiO2 polymeric matrix: Flexural, wear and morphological properties

Article • Journal of Thermoplastic Composite Materials, September 2020, SAGE Publications

Professor Rupinder Singh
On effect of chemical-assisted mechanical blending of barium titanate and graphene in PVDF for 3D printing applications

Article • Journal of Thermoplastic Composite Materials, August 2020, SAGE Publications

Professor Rupinder Singh
Repair of automotive bumpers and bars with modified friction stir welding

Article • Journal of Central South University, August 2020, Springer Science + Business Media

Professor Rupinder Singh
On 3D-printed ZnO-reinforced PLA matrix composite: Tensile, thermal, morphological and shape memory characteristics

Article • Journal of Thermoplastic Composite Materials, July 2020, SAGE Publications

Professor Rupinder Singh
On multi-factor optimisation of Ni-Cr-based partial dentures by centrifugal casting

Article • Advances in Materials and Processing Technologies, July 2020, Taylor & Francis

Professor Rupinder Singh
Investigations for partial denture casting by fused deposition modelling-assisted chemical vapour smoothing

Article • Assembly Automation, June 2020, Emerald

Professor Rupinder Singh
On nano polypyrrole and carbon nano tube reinforced PVDF for 3D printing applications: Rheological, thermal, electrical, mechanical, morphological characterization

Article • Journal of Composite Materials, June 2020, SAGE Publications

Professor Rupinder Singh
Reinforced non-conventional material composites: a comprehensive review

Article • Advances in Materials and Processing Technologies, June 2020, Taylor & Francis

Professor Rupinder Singh
On Investigation of Dimensional Deviation for Hybrid Composite Matrix of PLA

Article • June 2020, Springer Science + Business Media

Professor Rupinder Singh
On cryogenic milling of primary recycled ABS: Rheological, morphological, and surface properties

Article • Journal of Thermoplastic Composite Materials, June 2020, SAGE Publications

Professor Rupinder Singh
Numerical simulation on residual stresses of stainless steel SS-304 thin welded pipe

Article • Measurement and Control, May 2020, SAGE Publications

Professor Rupinder Singh
On recyclability of thermosetting polymer and wood dust as reinforcement in secondary recycled ABS for nonstructural engineering applications

Article • Journal of Thermoplastic Composite Materials, May 2020, SAGE Publications

Professor Rupinder Singh
Three-dimensional printing of dual thermoplastic materials with different layer combinations: Tensile, flexural, and fractured surface investigations

Article • Journal of Thermoplastic Composite Materials, May 2020, SAGE Publications

Professor Rupinder Singh
Investigations for Wear Characteristics of Aluminium-Based Metal Matrix Composite Prepared by Hybrid Reinforcement

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, May 2020, Springer Science + Business Media

Professor Rupinder Singh
Secondary recycled acrylonitrile–butadiene–styrene and graphene composite for 3D/4D applications: Rheological, thermal, magnetometric, and mechanical analyses

Article • Journal of Thermoplastic Composite Materials, May 2020, SAGE Publications

Professor Rupinder Singh
ZnO nanoparticle-grafted PLA thermoplastic composites for 3D printing applications: Tuning of thermal, mechanical, morphological and shape memory effect

Article • Journal of Thermoplastic Composite Materials, May 2020, SAGE Publications

Professor Rupinder Singh
Comparison of mechanical and morphological properties of 3-D printed functional prototypes: Multi and hybrid blended thermoplastic matrix

Article • Journal of Thermoplastic Composite Materials, May 2020, SAGE Publications

Professor Rupinder Singh
Correction to: Effect of process parameters on surface roughness of hybrid investment casting

Article • Progress in Additive Manufacturing, May 2020, Springer Science + Business Media

Professor Rupinder Singh
Wear behavior of textured tools under graphene-assisted minimum quantity lubrication system in machining Ti-6Al-4V alloy

Article • Tribology International, May 2020, Elsevier

Professor Rupinder Singh
On mechanical and thermal properties of cryo-milled primary recycled ABS

Article • Sadhana, March 2020, Springer Science + Business Media

Professor Rupinder Singh
Investigations on hardness of investment-casted implants fabricated after vapour smoothing of FDM replicas

Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, March 2020, Springer Science + Business Media

Professor Rupinder Singh
Investigations for mechanical, thermal and magnetic properties of polymeric composite matrix for four-dimensional printing applications

Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, March 2020, Springer Science + Business Media

Professor Rupinder Singh
On investigations of thermal conductivity, circumferential compressive strength, and surface characterization of 3D-printed hybrid blended magnetostrictive PLA composite

Article • Journal of Thermoplastic Composite Materials, February 2020, SAGE Publications

Professor Rupinder Singh
On mechanical and surface properties of electro-active polymer matrix-based 3D printed functionally graded prototypes

Article • Journal of Thermoplastic Composite Materials, February 2020, SAGE Publications

Professor Rupinder Singh
Post-processing of ABS Replicas with Vapour Smoothing for Investment Casting Applications

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, February 2020, Springer Science + Business Media

Professor Rupinder Singh
Processing techniques of polymeric materials and their reinforced composites

Article • Advances in Materials and Processing Technologies, February 2020, Taylor & Francis

Professor Rupinder Singh
Friction Welding for Functional Prototypes of PA6 and ABS with Al Powder Reinforcement

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, February 2020, Springer Science + Business Media

Professor Rupinder Singh
Mechanical, Rheological and Thermal Investigations of Biocompatible Feedstock Filament Comprising of PVC, PP and HAp

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, February 2020, Springer Science + Business Media

Professor Rupinder Singh
On compressive and morphological features of 3D printed almond skin powder reinforced PLA matrix

Article • Materials Research Express, February 2020, Institute of Physics Publishing

Professor Rupinder Singh
Mechanical characterization and comparison of additive manufactured ABS, Polyflex™ and ABS/Polyflex™ blended functional prototypes

Article • Rapid Prototyping Journal, January 2020, Emerald

Professor Rupinder Singh
On 3D printed scaffolds for orthopedic tissue engineering applications

Article • SN Applied Sciences, January 2020, Springer Science + Business Media

Professor Rupinder Singh
On mechanical and morphological investigations of tungsten inert gas welded SS 304 thin pipe joints

Article • Measurement and Control, January 2020, SAGE Publications

Professor Rupinder Singh
Investigating the optimum parametric setting for MRR of expandable polystyrene machined with 3D printed end mill tool

Article • Materials Today Proceedings, January 2020, Elsevier

Dr CHANDER PRAKASH, Professor Rupinder Singh
On multi response optimization and process capability analysis for surface properties of 3D printed functional prototypes of PVC reinforced with PP and HAp

Article • Materials Today Proceedings, January 2020, Elsevier

Professor Rupinder Singh
On wear of 3D printed Al2O3 reinforced Nylon6 matrix based functional prototypes

Article • Materials Today Proceedings, January 2020, Elsevier

Professor Rupinder Singh
Effect of extrusion parameters on primary recycled ABS: mechanical, rheological, morphological and thermal properties

Article • Materials Research Express, January 2020, Institute of Physics Publishing

Professor Rupinder Singh
On flexural and pull out properties of 3D printed PLA based hybrid composite matrix

Article • Materials Research Express, January 2020, Institute of Physics Publishing

Professor Rupinder Singh
On process capability comparison of hybrid and multi blend PLA matrix composite: Magnetic and surface properties view point

Article • Materials Today Proceedings, January 2020, Elsevier

Professor Rupinder Singh
Investigations for Improving Solid-State Weldability of Dissimilar Thermoplastic Composites Through Melt Processing

Article • January 2020, Springer Science + Business Media

Professor Rupinder Singh
Segregation and Recycling of Plastic Solid Waste: A Review

Article • January 2020, Springer Science + Business Media

Professor Rupinder Singh
Vapor smoothing process for surface finishing of FDM replicas

Article • Materials Today Proceedings, January 2020, Elsevier

Professor Rupinder Singh
CAD-CAM assisted investment casting for preparation of dental crowns

Article • Materials Today Proceedings, January 2020, Elsevier

Professor Rupinder Singh
On SiC/Al2O3 reinforced HDPE 3D printed rapid tooling

Article • Materials Today Proceedings, January 2020, Elsevier

Professor Rupinder Singh
On effect of almond skin powder waste reinforcement in PA6: Rheological, thermal and wear properties

Article • Materials Today Proceedings, January 2020, Elsevier

Professor Rupinder Singh
Wear properties of rapid tooling prepared by reinforcement of SiC/Al2O3 in HDPE domestic waste

Article • Materials Today Proceedings, January 2020, Elsevier

Professor Rupinder Singh
On technological solutions for repair and rehabilitation of heritage sites: a review

Article • Advances in Materials and Processing Technologies, December 2019, Taylor & Francis

Professor Rupinder Singh
Additive manufacturing of smart materials exhibiting 4-D properties: A state of art review

Article • Journal of Thermoplastic Composite Materials, December 2019, SAGE Publications

Professor Rupinder Singh
Flexural, pull-out, and fractured surface characterization for multi-material 3D printed functionally graded prototype

Article • Journal of Composite Materials, December 2019, SAGE Publications

Professor Rupinder Singh
On mechanical, thermal and morphological investigations of almond skin powder-reinforced polylactic acid feedstock filament

Article • Journal of Thermoplastic Composite Materials, November 2019, SAGE Publications

Professor Rupinder Singh
Metal matrix composite: a methodological review

Article • Advances in Materials and Processing Technologies, October 2019, Taylor & Francis

Professor Rupinder Singh
Influence of graphene-enriched nanofluids and textured tool on machining behavior of Ti-6Al-4V alloy

Article • The International Journal of Advanced Manufacturing Technology, October 2019, Springer Science + Business Media

Professor Rupinder Singh
On printability of PLA-PEKK-HAp-CS based functional prototypes with FDM: thermo-mechanical investigations

Article • Materials Research Express, October 2019, Institute of Physics Publishing

Professor Rupinder Singh
Friction Stir Welding of Three-Dimensional Printed Polymer Composites with Semi-consumable Tool

Article • October 2019, Springer Science + Business Media

Professor Rupinder Singh
On mechanical characterization of 3-D printed PLA-PVC-wood dust-Fe3O4 composite

Article • Journal of Thermoplastic Composite Materials, October 2019, SAGE Publications

Professor Rupinder Singh
Optimization of machining parameters under MQL turning of Ti-6Al-4V alloy with textured tool using multi-attribute decision-making methods

Article • World Journal of Engineering, October 2019, Emerald

Professor Rupinder Singh
CAD-CAM Assisted Design and Preparation of Biocompatible Sensors and Transducers with Variable Microstructure

Article • Key Engineering Materials, October 2019, Trans Tech Publications

Professor Rupinder Singh
Graphene Reinforced Composites as Sensing Elements

Article • Key Engineering Materials, October 2019, Trans Tech Publications

Professor Rupinder Singh
On the Optimal Design of Metal Matrix Composites as Functionally Graded Innovative Materials for Sensor Devices

Article • Key Engineering Materials, October 2019, Trans Tech Publications

Professor Rupinder Singh
Multifactor Optimization for Development of Biocompatible and Biodegradable Feed Stock Filament of Fused Deposition Modeling

Article • Journal of The Institution of Engineers (India) Series E, September 2019, Springer Science + Business Media

Professor Rupinder Singh
Thermomechanical investigations of PEKK-HAp-CS composites

Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, September 2019, SAGE Publications

Professor Rupinder Singh, Professor Dr. MD MUSTAFIZUR RAHMAN
Investigations for machinability of primary recycled thermoplastics with secondary recycled rapid tooling

Article • Sadhana, September 2019, Springer Science + Business Media

Professor Rupinder Singh
Investigations for tensile, compressive and morphological properties of 3D printed functional prototypes of PLA-PEKK-HAp-CS

Article • Journal of Thermoplastic Composite Materials, August 2019, SAGE Publications

Professor Rupinder Singh
Multimaterial printing and characterization for mechanical and surface properties of functionally graded prototype

Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, August 2019, SAGE Publications

Professor Rupinder Singh
On secondary recycling of ZrO2-reinforced HDPE filament prepared from domestic waste for possible 3-D printing of bearings

Article • Journal of Thermoplastic Composite Materials, July 2019, SAGE Publications

Professor Rupinder Singh
Study on barium titanate and graphene reinforced PVDF matrix for 4D applications

Article • Journal of Thermoplastic Composite Materials, July 2019, SAGE Publications

Professor Rupinder Singh
Investigations on 3D printed thermosetting and ceramic-reinforced recycled thermoplastic-based functional prototypes

Article • Journal of Thermoplastic Composite Materials, July 2019, SAGE Publications

Professor Rupinder Singh
Investigations for tool life of 3D printed HDPE and LDPE composite based rapid tooling for thermoplastics machining applications

Article • Engineering Research Express, July 2019, Institute of Physics Publishing

Professor Rupinder Singh
Recycled HDPE reinforced Al2O3 and SiC three dimensional printed patterns for sandwich composite material

Article • Engineering Research Express, July 2019, Institute of Physics Publishing

Professor Rupinder Singh
Investigations of polylactic acid reinforced composite feedstock filaments for multimaterial three-dimensional printing applications

Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, July 2019, SAGE Publications

Professor Rupinder Singh
Mechanical and morphological investigations of 3D printed recycled ABS reinforced with bakelite–SiC–Al2O3

Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, June 2019, SAGE Publications

Professor Rupinder Singh
Investigations for magnetic properties of PLA-PVC-Fe3O4-wood dust blend for self-assembly applications

Article • Journal of Thermoplastic Composite Materials, June 2019, SAGE Publications

Professor Rupinder Singh
Thermal and structural modelling of arc welding processes: A literature review

Article • Measurement and Control, June 2019, SAGE Publications

Professor Rupinder Singh
Dimensionless Analysis for Investigating the Quality Characteristics of Aluminium Matrix Composites Prepared through Fused Deposition Modelling Assisted Investment Casting

Article • Materials, June 2019, MDPI AG

Dr CHANDER PRAKASH, Professor Rupinder Singh
On investigation of rheological, mechanical and morphological characteristics of waste polymer-based feedstock filament for 3D printing applications

Article • Journal of Thermoplastic Composite Materials, June 2019, SAGE Publications

Professor Rupinder Singh
Investigations for Wax Coated 3D Printed Hybrid Patterns for Partial Dentures

Article • June 2019, ASME International

Professor Rupinder Singh
Multi Response Optimization and Process Capability Analysis of Fused Filament Fabrication and Chemical Vapor Smoothing Operations for Rapid Casting of Biomedical Implants

Article • June 2019, ASME International

Professor Rupinder Singh
Investigations on joining of orthopaedic scaffold with rapid tooling

Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, May 2019, SAGE Publications

Professor Rupinder Singh
PLA-PEKK-HAp-CS composite scaffold joining with friction stir spot welding

Article • Journal of Thermoplastic Composite Materials, May 2019, SAGE Publications

Professor Rupinder Singh, Professor Dr. MD MUSTAFIZUR RAHMAN
Partial dentures by centrifugal casting assisted by additive manufacturing

Article • Sadhana, May 2019, Springer Science + Business Media

Professor Rupinder Singh
Waste thermosetting polymer and ceramic as reinforcement in thermoplastic matrix for sustainability: Thermomechanical investigations

Article • Journal of Thermoplastic Composite Materials, May 2019, SAGE Publications

Professor Rupinder Singh
Friction stir welding of 3D printed melt flow compatible dissimilar thermoplastic composites

Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, May 2019, SAGE Publications

Professor Rupinder Singh
Green Design of Novel Metal Matrix Composites

Article • IOP Conference Series Materials Science and Engineering, February 2019, Institute of Physics Publishing

Professor Rupinder Singh
Mathematical Modeling of Surface Roughness in the Forming of Innovative Materials

Article • IOP Conference Series Materials Science and Engineering, February 2019, Institute of Physics Publishing

Professor Rupinder Singh
Mechanical and Experimental Study on the use of Sustainable Materials for Additive Manufacturing

Article • IOP Conference Series Materials Science and Engineering, February 2019, Institute of Physics Publishing

Professor Rupinder Singh
Mechanical, thermal and micrographic investigations of friction stir welded: 3D printed melt flow compatible dissimilar thermoplastics

Article • Journal of Manufacturing Processes, February 2019, Elsevier

Professor Rupinder Singh
Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts

Article • The International Journal of Advanced Manufacturing Technology, January 2019, Springer Science + Business Media

Dr CHANDER PRAKASH, Professor Rupinder Singh
Mechanical feasibility of ABS/HIPS-based multi-material structures primed by low-cost polymer printer

Article • Rapid Prototyping Journal, January 2019, Emerald

Dr CHANDER PRAKASH, Professor Rupinder Singh
Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures

Article • Polymers, January 2019, MDPI AG

Professor Rupinder Singh
3D printed functional prototypes for electrochemical energy storage

Article • International Journal of Materials Engineering Innovation, January 2019, Inderscience Publishers

Professor Rupinder Singh
Biomanufacturing

Article • January 2019, Springer Science + Business Media

Professor Rupinder Singh
Friction stir welding of ABS-15Al sheets by introducing compatible semi-consumable shoulder-less pin of PA6-50Al

Article • Measurement, January 2019, Elsevier

Professor Rupinder Singh
Investigations for mechanical properties of PLA-HAp-CS based functional prototypes

Article • Materials Today Proceedings, January 2019, Elsevier

Professor Rupinder Singh
Metal matrix composite from recycled materials by using additive manufacturing assisted investment casting

Article • Composite Structures, January 2019, Elsevier

Professor Rupinder Singh
On the additive manufacturing of an energy storage device from recycled material

Article • Composites Part B Engineering, January 2019, Elsevier

Professor Rupinder Singh
Polymer–matrix composites for rapid tooling in clinical dentistry

Article • January 2019, Elsevier

Professor Rupinder Singh
Prediction of Temperature Distribution and Displacement of Carbon Steel Plates by FEM

Article • Materials Today Proceedings, January 2019, Elsevier

Professor Rupinder Singh
Processing of Melt Flow Compatible Thermoplastic Composites for Solid State Welding Applications

Article • Materials Today Proceedings, January 2019, Elsevier

Professor Rupinder Singh
Investigations for Surface Hardness of Aluminum Matrix Composites with Hybrid Reinforcement

Article • Transactions of the Indian Institute of Metals, November 2018, Springer Science + Business Media

Professor Rupinder Singh
Multifactor optimization of FDM process parameters for development of rapid tooling using SiC/Al2O3-reinforced LDPE filament

Article • Journal of Thermoplastic Composite Materials, October 2018, SAGE Publications

Professor Rupinder Singh
On the 3D printing of recycled ABS, PLA and HIPS thermoplastics for structural applications

Article • PSU Research Review, October 2018, Emerald

Professor Rupinder Singh
Mechanical, thermal and melt flow of aluminum-reinforced PA6/ABS blend feedstock filament for fused deposition modeling

Article • Rapid Prototyping Journal, October 2018, Emerald

Professor Rupinder Singh
Development of PLA-HAp-CS-based biocompatible functional prototype: A case study

Article • Journal of Thermoplastic Composite Materials, October 2018, SAGE Publications

Professor Rupinder Singh
Thermomechanical investigations of SiC and Al2O3–reinforced HDPE

Article • Journal of Thermoplastic Composite Materials, September 2018, SAGE Publications

Professor Rupinder Singh
On Development of Functionally Graded Material Through Fused Deposition Modelling Assisted Investment Casting from Al2O3/SiC Reinforced Waste Low Density Polyethylene

Article • Transactions of the Indian Institute of Metals, July 2018, Springer Science + Business Media

Professor Rupinder Singh
Effect of SiC/Al2O3 particle size reinforcement in recycled LDPE matrix on mechanical properties of FDM feed stock filament

Article • Virtual and Physical Prototyping, July 2018, Taylor & Francis

Professor Rupinder Singh
Melt processing for enhancing compatibility of aluminum-reinforced acrylonitrile–butadiene–styrene and polyamide 6 for friction welding applications

Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, July 2018, Springer Science + Business Media

Professor Rupinder Singh
Surface characterization of zirconia ceramics in ultrasonic vibration-assisted grinding

Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, July 2018, Springer Science + Business Media

Professor Rupinder Singh
On the applicability of composite PA6-TiO2 filaments for the rapid prototyping of innovative materials and structures

Article • Composites Part B Engineering, June 2018, Elsevier

Professor Rupinder Singh
Recycling of polymer waste with SiC/Al2O3 reinforcement for rapid tooling applications

Article • Materials Today Communications, June 2018, Elsevier

Professor Rupinder Singh
Investigations for mechanical properties and biocompatibility of SS-316L implant prepared as rapid investment casting for batch production

Article • Sadhana, May 2018, Springer Science + Business Media

Mr Jaspreet Singh, Professor Rupinder Singh
Investigations of mechanical, thermal and morphological properties of FDM fabricated parts for friction welding applications

Article • Measurement, May 2018, Elsevier

Professor Rupinder Singh
Availability Performance Analysis of Thermal Power Plants

Article • Journal of The Institution of Engineers (India) Series C, March 2018, Springer Science + Business Media

Professor Rupinder Singh
Weldability of thermoplastic materials for friction stir welding- A state of art review and future applications

Article • Composites Part B Engineering, March 2018, Elsevier

Professor Rupinder Singh
Investigations for Enhancing Wear Properties of Rapid Tooling by Reinforcement of Nanoscale Fillers for Grinding Applications

Article • Journal of Micro and Nano-Manufacturing, February 2018, ASME International

Professor Rupinder Singh
Graphene as biomedical sensing element: State of art review and potential engineering applications

Article • Composites Part B Engineering, February 2018, Elsevier

Professor Rupinder Singh
Sustainability of Recycled ABS and PA6 by Banana Fiber Reinforcement: Thermal, Mechanical and Morphological Properties

Article • Journal of The Institution of Engineers (India) Series C, January 2018, Springer Science + Business Media

Professor Rupinder Singh
Thermal and surface characterization of ABS replicas made by FDM for rapid tooling applications

Article • Rapid Prototyping Journal, January 2018, Emerald

Professor Rupinder Singh
Surface roughness prediction using Buckingham’s Pi-theorem for SS-316L hip implant prepared as rapid investment casting

Article • Materials Today Proceedings, January 2018, Elsevier

Mr Jaspreet Singh, Professor Rupinder Singh
On the recyclability of polyamide for sustainable composite structures in civil engineering

Article • Composite Structures, January 2018, Elsevier

Professor Rupinder Singh
Development and surface improvement of FDM pattern based investment casting of biomedical implants: A state of art review

Article • Journal of Manufacturing Processes, January 2018, Elsevier

Professor Rupinder Singh
Experimental study of surface properties and material transfer mechanism in powder mixed electric discharge machining of Ti-6Al-4V alloy

Article • International Journal of Microstructure and Materials Properties, January 2018, Inderscience Publishers

Professor Rupinder Singh
Friction welding for the manufacturing of PA6 and ABS structures reinforced with Fe particles

Article • Composites Part B Engineering, January 2018, Elsevier

Professor Rupinder Singh
In-vitro studies of SS 316 L biomedical implants prepared by FDM, vapor smoothing and investment casting

Article • Composites Part B Engineering, January 2018, Elsevier

Professor Rupinder Singh
Investigating the Polymeric Composites for Online Repair and Maintenance

Article • January 2018, Springer Science + Business Media

Professor Rupinder Singh
Investigations for mechanical properties of Hap, PVC and PP based 3D porous structures obtained through biocompatible FDM filaments

Article • Composites Part B Engineering, January 2018, Elsevier

Professor Rupinder Singh
Process Capability Comparison of Fused Deposition Modelling for ABS and Fe-Nylon (6) Feedstock Filaments

Article • Materials Today Proceedings, January 2018, Elsevier

Professor Rupinder Singh
Process Capability Analysis for Frictionally Welded Dissimilar Polymeric Materials

Article • Materials Today Proceedings, January 2018, Elsevier

Professor Rupinder Singh
Comparisons of Process Capability in Cold Chamber Die Casting of Aluminium Alloy

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, December 2017, Springer Science + Business Media

Professor Rupinder Singh
Mechanical properties of bio compatible functional prototypes for joining applications in clinical dentistry

Article • International Journal of Production Research, November 2017, Taylor & Francis

Professor Rupinder Singh
Experimental investigations for preparation of biocompatible feedstock filament of fused deposition modeling (FDM) using twin screw extrusion process

Article • Journal of Thermoplastic Composite Materials, October 2017, SAGE Publications

Professor Rupinder Singh
Effect of cryogenically treated copper-tungsten electrode on tool wear rate during electro-discharge machining of Ti-5Al-2.5Sn alloy

Article • Wear, September 2017, Elsevier

Professor Rupinder Singh
Multi-objective optimization of dimensional accuracy, surface roughness and hardness of hybrid investment cast components

Article • Rapid Prototyping Journal, August 2017, Emerald

Professor Rupinder Singh
Experimental investigation on shore hardness of barrel-finished FDM patterns

Article • Sadhana, August 2017, Springer Science + Business Media

Professor Rupinder Singh
Investigations for Thermal and Electrical Conductivity of ABS-Graphene Blended Prototypes

Article • Materials, July 2017, MDPI AG

Professor Rupinder Singh
Investigation of Dry Sliding Wear Properties of Aluminium Matrix Composite Prepared Through FDMAIC Process Using Reinforced Pattern

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, July 2017, Springer Science + Business Media

Professor Rupinder Singh
Modelling of micro hardness in cold chamber pressure die casting process

Article • Advances in Materials and Processing Technologies, June 2017, Taylor & Francis

Professor Rupinder Singh
Experimental Investigations for Wear Properties of Rapid Tooling With Nano Scale Fillers for Grinding Applications

Article • June 2017, ASME International

Professor Rupinder Singh
On the wear properties of Nylon6-SiC-Al 2 O 3 based fused deposition modelling feed stock filament

Article • Composites Part B Engineering, June 2017, Elsevier

Professor Rupinder Singh
Experimental Investigation for the Hardness of Castings Produced by Using ZCast Process

Article • Transactions of the Indian Institute of Metals, May 2017, Springer Science + Business Media

Professor Rupinder Singh
Effect of hybrid reinforcement of SiC and Al2O3 in Nylon-6 matrix on mechanical properties of feed stock filament for FDM

Article • Advances in Materials and Processing Technologies, May 2017, Taylor & Francis

Professor Rupinder Singh
Experimental Investigations for Modelling Hardness of ABS Replica Based Investment Castings

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, May 2017, Springer Science + Business Media

Professor Rupinder Singh
Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications

Article • Composites Part B Engineering, May 2017, Elsevier

Professor Rupinder Singh
Experimental Investigations for Surface Roughness and Dimensional Accuracy of FDM Components with Barrel Finishing

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, April 2017, Springer Science + Business Media

Professor Rupinder Singh
Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications

Article • Rapid Prototyping Journal, April 2017, Emerald

Professor Rupinder Singh
Investigating the friction coefficient in functionally graded rapid prototyping of Al–Al2O3 composite prepared by fused deposition modelling

Article • Assembly Automation, April 2017, Emerald

Professor Rupinder Singh
Investigations for dimensional accuracy of Al alloy/Al-MMC developed by combining stir casting and ABS replica based investment casting

Article • Composites Part B Engineering, April 2017, Elsevier

Professor Rupinder Singh
Recycling of plastic solid waste: A state of art review and future applications

Article • Composites Part B Engineering, April 2017, Elsevier

Professor Rupinder Singh
Modelling the Cast Component Weight in Hot Chamber Die Casting using Combined Taguchi and Buckingham’s π Approach

Article • Journal of The Institution of Engineers (India) Series C, March 2017, Springer Science + Business Media

Professor Rupinder Singh
Investigations for modelling hardness of biomedical implant during replication of FDM-based patterns by vacuum moulding

Article • Sadhana, February 2017, Springer Science + Business Media

Professor Rupinder Singh
Investigations for improving the surface finish of FDM based ABS replicas by chemical vapor smoothing process: a case study

Article • Assembly Automation, February 2017, Emerald

Mr Jaspreet Singh, Professor Rupinder Singh
Investigation for surface finish improvement of FDM parts by vapor smoothing process

Article • Composites Part B Engineering, February 2017, Elsevier

Professor Rupinder Singh
Mathematical Modelling for Dimensional Accuracy in Vacuum Moulding

Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, January 2017, Springer Science + Business Media

Professor Rupinder Singh
Fabrication and machining of ceramic composites — A review on current scenario

Article • Materials and Manufacturing Processes, January 2017, Taylor & Francis

Professor Rupinder Singh
Dimensional accuracy and surface finish of biomedical implant fabricated as rapid investment casting for small to medium quantity production

Article • Journal of Manufacturing Processes, January 2017, Elsevier

Mr Jaspreet Singh, Professor Rupinder Singh
Fuzzy Based Advanced Hybrid Intrusion Detection System to Detect Malicious Nodes in Wireless Sensor Networks

Article • Wireless Communications and Mobile Computing, January 2017, Hindawi Publishing Corporation

Professor Rupinder Singh
Computational and Parametric Analysis of Parabolic Trough Collector with Different Heat Transfer Fluids

Article • January 2017, Springer Science + Business Media

Professor Rupinder Singh
Material issues in additive manufacturing: A review

Article • Journal of Manufacturing Processes, January 2017, Elsevier

Professor Rupinder Singh
Modelling of dimensional accuracy in precision investment casting using Buckingham’s Pi approach

Article • Materials Today Proceedings, January 2017, Elsevier

Professor Rupinder Singh
Repeatability of linear and radial dimension of ABS replicas fabricated by fused deposition modelling and chemical vapor smoothing process: A case study

Article • Measurement, December 2016, Elsevier

Mr Jaspreet Singh, Professor Rupinder Singh
Parametric optimization of fused deposition modeling and vapour smoothing processes for surface finishing of biomedical implant replicas

Article • Measurement, December 2016, Elsevier

Professor Rupinder Singh
Effect of single particle size, double particle size and triple particle size Al2O3 in Nylon-6 matrix on mechanical properties of feed stock filament for FDM

Article • Composites Part B Engineering, December 2016, Elsevier

Professor Rupinder Singh
Thermal characterization of recycled polymer for additive manufacturing applications

Article • Composites Part B Engineering, December 2016, Elsevier

Professor Rupinder Singh
Predictive modeling of surface roughness in ultrasonic machining of cryogenic treated Ti-6Al-4V

Article • Engineering Computations, November 2016, Emerald

Professor Rupinder Singh
Waste management by recycling of polymers with reinforcement of metal powder

Article • Composites Part B Engineering, November 2016, Elsevier

Professor Rupinder Singh
Enhancing reliability of thermal power plant by implementing RCM policy and developing reliability prediction model: a case study

Article • International Journal of Systems Assurance Engineering and Management, October 2016, Springer Science + Business Media

Professor Rupinder Singh
Investigating the effect of vacuum pressure, refractory grain size and vibrations on the quality characteristics of casting produced through vacuum moulding

Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, October 2016, Springer Science + Business Media

Professor Rupinder Singh
Mathematical modelling of surface roughness for vapour processing of ABS parts fabricated with fused deposition modelling

Article • Journal of Manufacturing Processes, October 2016, Elsevier

Professor Rupinder Singh
Development of functionally graded material by fused deposition modelling assisted investment casting

Article • Journal of Manufacturing Processes, October 2016, Elsevier

Professor Rupinder Singh
Experimental investigations for mechanical and metallurgical properties of friction stir welded recycled dissimilar polymer materials with metal powder reinforcement

Article • Composites Part B Engineering, October 2016, Elsevier

Professor Rupinder Singh
Investigating surface properties of cryogenically treated titanium alloys in powder mixed electric discharge machining

Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, September 2016, Springer Science + Business Media

Professor Rupinder Singh
Friction welding of dissimilar plastic/polymer materials with metal powder reinforcement for engineering applications

Article • Composites Part B Engineering, September 2016, Elsevier

Professor Rupinder Singh
Application of a hybrid Taguchi-entropy weight-based GRA method to optimize and neural network approach to predict the machining responses in ultrasonic machining of Ti–6Al–4V

Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, August 2016, Springer Science + Business Media

Professor Rupinder Singh
Surface roughness improvement of cast components in vacuum moulding by intermediate barrel finishing of fused deposition modelling patterns

Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, August 2016, SAGE Publications

Professor Rupinder Singh
Modeling the tool wear rate in powder mixed electro-discharge machining of titanium alloys using dimensional analysis of cryogenically treated electrodes and workpiece

Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, August 2016, SAGE Publications

Professor Rupinder Singh
Development of in-house composite wire based feed stock filaments of fused deposition modelling for wear-resistant materials and structures

Article • Composites Part B Engineering, August 2016, Elsevier

Professor Rupinder Singh
Modelling the Peak Elongation of Nylon6 and Fe Powder Based Composite Wire for FDM Feedstock Filament

Article • Journal of The Institution of Engineers (India) Series C, June 2016, Springer Science + Business Media

Professor Rupinder Singh
Process optimization of single screw extruder for development of Nylon 6-Al-Al2O3 alternative FDM filament

Article • Rapid Prototyping Journal, June 2016, Emerald

Professor Rupinder Singh
Tribological Properties of Fe–Nylon6 Composite Parts Prepared Using Fused Deposition Modelling

Article • Transactions of the Indian Institute of Metals, June 2016, Springer Science + Business Media

Professor Rupinder Singh
Some Investigations on Effect of Cooling Rate on Al2O3 Reinforced Al-MMC Prepared by Vacuum Moulding

Article • Journal of The Institution of Engineers (India) Series C, June 2016, Springer Science + Business Media

Professor Rupinder Singh
Modeling and Analysis for Hardness and Structure of Nonferrous Alloy Castings Produced Using Zcast Metal Casting Process through Response Surface Methodology

Article • Advanced Materials Research, June 2016, Trans Tech Publications

DR INDERPREET SINGH IPS AHUJA, Professor Rupinder Singh, RAJESH KUMAR
Effect of Hot Vapor Smoothing Process on Surface Hardness of Fused Deposition Modeling Parts

Article • 3D Printing and Additive Manufacturing, June 2016, Mary Ann Liebert Inc

Professor Rupinder Singh
Investigations for dimensional accuracy of AMC prepared by using Nylon6-Al-Al2O3 reinforced FDM filament in investment casting

Article • Rapid Prototyping Journal, April 2016, Emerald

Professor Rupinder Singh
Process capability study of three dimensional printing as casting solution for non ferrous alloys

Article • Rapid Prototyping Journal, April 2016, Emerald

Professor Rupinder Singh, RAJESH KUMAR
Experimental investigations for development of Nylon6-Al-Al2O3 alternative FDM filament

Article • Rapid Prototyping Journal, March 2016, Emerald

Professor Rupinder Singh
Development of rapid tooling using fused deposition modeling: a review

Article • Rapid Prototyping Journal, March 2016, Emerald

Professor Rupinder Singh
Development of ABS based wire as feedstock filament of FDM for industrial applications

Article • Rapid Prototyping Journal, March 2016, Emerald

Professor Rupinder Singh
Investigations for melt flow index of Nylon6-Fe composite based hybrid FDM filament

Article • Rapid Prototyping Journal, March 2016, Emerald

Professor Rupinder Singh
Wear behavior of FDM parts fabricated by composite material feed stock filament

Article • Rapid Prototyping Journal, March 2016, Emerald

Professor Rupinder Singh
Some investigations on surface roughness of aluminium metal composite primed by fused deposition modeling-assisted investment casting using reinforced filament

Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, March 2016, Springer Science + Business Media

Professor Rupinder Singh
Effect of process parameters on micro hardness of Al–Al2O3 composite prepared using an alternative reinforced pattern in fused deposition modelling assisted investment casting

Article • Robotics and Computer-Integrated Manufacturing, February 2016, Elsevier

Professor Rupinder Singh
Machining performance of cryogenically treated Ti–5Al–2.5Sn titanium alloy in electric discharge machining: A comparative study

Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, January 2016, SAGE Publications

SANJEEV KUMAR, Professor Rupinder Singh
Fused deposition modelling based rapid patterns for investment casting applications: a review

Article • Rapid Prototyping Journal, January 2016, Emerald

Professor Rupinder Singh
Experimental investigations on hardness of the biomedical implants prepared by hybrid investment casting

Article • Journal of Manufacturing Processes, January 2016, Elsevier

DR INDERPREET SINGH IPS AHUJA, Professor Rupinder Singh
Investigation for dimensional accuracy of AMC prepared by FDM assisted investment casting using nylon-6 waste based reinforced filament

Article • Measurement, January 2016, Elsevier

Professor Rupinder Singh
Study the effect of black layer on electrode wear ratio in powder mixed electric discharge machining of titanium alloys

Article • International Journal of Machining and Machinability of Materials, January 2016, Inderscience Publishers

Professor Rupinder Singh
Theoretical and Empirical Analysis of Usage of MapReduce and Apache Tez in Big Data

Article • January 2016, Springer Science + Business Media

Professor Rupinder Singh
WRHT: A Hybrid Technique for Detection of Wormhole Attack in Wireless Sensor Networks

Article • Mobile Information Systems, January 2016, Wiley

Professor Rupinder Singh
Effect of Cryogenic Treatment on Sensitization of 304 Stainless Steel in TIG Welding

Article • Journal of The Institution of Engineers (India) Series C, December 2015, Springer Science + Business Media

Professor Rupinder Singh
Effect of Some Parameters on the Cast Component Properties in Hot Chamber Die Casting

Article • Journal of The Institution of Engineers (India) Series C, November 2015, Springer Science + Business Media

Professor Rupinder Singh
Precision investment casting: A state of art review and future trends

Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, October 2015, SAGE Publications

Professor Rupinder Singh
Investigations on dimensional accuracy of the components prepared by hybrid investment casting

Article • Journal of Manufacturing Processes, October 2015, Elsevier

DR INDERPREET SINGH IPS AHUJA, Professor Rupinder Singh
Comparison of wear behavior of ABS and Nylon6—Fe powder composite parts prepared with fused deposition modelling

Article • Journal of Central South University, October 2015, Springer Science + Business Media

Professor Rupinder Singh
Wear modelling of Al-Al2O3 functionally graded material prepared by FDM assisted investment castings using dimensionless analysis

Article • Journal of Manufacturing Processes, October 2015, Elsevier

Professor Rupinder Singh
Application of Fault Tree Analysis for Evaluating Reliability and Risk Assessment of a Thermal Power Plant

Article • Energy Sources Part A Recovery Utilization and Environmental Effects, September 2015, Taylor & Francis

Professor Rupinder Singh
Study on Tribological Properties of Al–Al2O3 Composites Prepared Through FDMAIC Route Using Reinforced Sacrificial Patterns

Article • Journal of Manufacturing Science and Engineering, September 2015, ASME International

Professor Rupinder Singh
Investigations of Al–SiC AMC prepared by vacuum moulding assisted stir casting

Article • Journal of Manufacturing Processes, August 2015, Elsevier

Professor Rupinder Singh
INVESTIGATIONS FOR STATISTICALLY CONTROLLED RESISTANCE SPOT WELDING SOLUTION OF STAINLESS STEEL

Article • Journal of Mechanical Engineering, July 2015, Bangladesh Journals Online (BanglaJOL)

Professor Rupinder Singh
Dimensionless analysis for obtaining desired surface finish of plastic replicas prepared by hybrid moulds

Article • Surface Topography Metrology and Properties, June 2015, Institute of Physics Publishing

Professor Rupinder Singh
Comparison of tribological behaviour for Nylon6-Al-Al2O3and ABS parts fabricated by fused deposition modelling

Article • Virtual and Physical Prototyping, April 2015, Taylor & Francis

Professor Rupinder Singh
Performance evaluation of coated carbide tool in machining of stainless steel (AISI 202) under minimum quantity lubrication (MQL)

Article • International Journal of Precision Engineering and Manufacturing-Green Technology, April 2015, Springer Science + Business Media

Prof. Manpreet Singh Bhatti, Dr. Talwinder Singh, Professor Rupinder Singh
Characterization of Al–Al2O3 composite prepared using reinforced fused deposition pattern in investment casting

Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, March 2015, SAGE Publications

Professor Rupinder Singh
Effect of Process Parameters on Hardness of Hip Joint Developed by Combining Fused Deposition Modelling and Investment Casting

Article • Transactions of the Indian Institute of Metals, February 2015, Springer Science + Business Media

Professor Rupinder Singh
Effect of Single, Double and Triple Particle Size SiC and Al2O3 Reinforcement on Wear Properties of AMC Prepared by Stir Casting in Vacuum Mould

Article • Transactions of the Indian Institute of Metals, February 2015, Springer Science + Business Media

Professor Rupinder Singh
Experimental Investigations for Statistically Controlled Solution of FDM Assisted Nylon6-Al-Al2O3replica Based Investment Casting

Article • Materials Today Proceedings, January 2015, Elsevier

Professor Rupinder Singh
Development of Aluminium MMC with Hybrid Reinforcement - A Review

Article • Materials Science Forum, December 2014, Trans Tech Publications

Professor Rupinder Singh
Modeling of Dimensional Accuracy in Three Dimensional Printing for Light Alloy Casting

Article • Materials Science Forum, December 2014, Trans Tech Publications

DR INDERPREET SINGH IPS AHUJA, Professor Rupinder Singh, RAJESH KUMAR
Development of New Composite Materials for Rapid Tooling Using Fused Deposition Modelling

Article • Materials Science Forum, December 2014, Trans Tech Publications

Professor Rupinder Singh
Study the Surface Characteristics of Cryogenically Treated Tool-Electrodes in Powder Mixed Electric Discharge Machining Process

Article • Materials Science Forum, December 2014, Trans Tech Publications

SANJEEV KUMAR, Professor Rupinder Singh
Hybrid Investment Casting

Article • Materials Science Forum, December 2014, Trans Tech Publications

DR INDERPREET SINGH IPS AHUJA, Professor Rupinder Singh
Mathematical Modeling of Sensitization in Resistance Spot Welding of SS

Article • Materials Science Forum, December 2014, Trans Tech Publications

Professor Rupinder Singh
Investigating the surface roughness of implant prepared by combining fused deposition modeling and investment casting

Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, November 2014, SAGE Publications

Professor Rupinder Singh
Mathematical Modeling of Surface Roughness of Castings Produced Using ZCast Direct Metal Casting

Article • Journal of The Institution of Engineers (India) Series C, October 2014, Springer Science + Business Media

Professor Rupinder Singh
Cast Component Hardness Comparison for Investment Casting Prepared with Wax and ABS Patterns

Article • Transactions of the Indian Institute of Metals, September 2014, Springer Science + Business Media

Professor Rupinder Singh
Taguchi approach for modelling of surface hardness in investment casting

Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, September 2014, SAGE Publications

Professor Rupinder Singh
A hybrid Taguchi-artificial neural network approach to predict surface roughness during electric discharge machining of titanium alloys

Article • Journal of Mechanical Science and Technology, July 2014, Springer Science + Business Media

Professor Rupinder Singh
Some Investigations on Hardness of Investment Casting Process After Advancements in Shell Moulding for Reduction in Cycle Time

Article • Journal of The Institution of Engineers (India) Series C, July 2014, Springer Science + Business Media

Professor Rupinder Singh
A mathematical model to predict material removal rate during electric discharge machining of cryogenically treated titanium alloys

Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, April 2014, SAGE Publications

Professor Rupinder Singh
Investigations for statistically controlled investment casting solution of FDM-based ABS replicas

Article • Rapid Prototyping Journal, April 2014, Emerald

Professor Rupinder Singh
Development of Nylon Based FDM Filament for Rapid Tooling Application

Article • Journal of The Institution of Engineers (India) Series C, April 2014, Springer Science + Business Media

Professor Rupinder Singh
Modeling of surface hardness in hot chamber die casting using Buckingham’s π approach

Article • Journal of Mechanical Science and Technology, February 2014, Springer Science + Business Media

Professor Rupinder Singh
Process capability analysis of fused deposition modelling for plastic components

Article • Rapid Prototyping Journal, January 2014, Emerald

Professor Rupinder Singh
Optimizing flank wear and surface roughness during hard turning of AISI D3 steel by Taguchi and RSM methods

Article • Production & Manufacturing Research, January 2014, Taylor & Francis

Prof. Manpreet Singh Bhatti, Professor Rupinder Singh
Comparing Taguchi Method and RSM for Optimizing Flank Wear and Surface Roughness During Hard Turning of AISI D3 Steel

Article • January 2014, Springer Science + Business Media

Professor Rupinder Singh
Development of Biomedical Implant (Hip Joint) by Combining Fused Deposition Modelling and Investment Casting

Article • January 2014, Springer Science + Business Media

Professor Rupinder Singh
Maintenance planning and control of blast furnace section: a case study of SAIL Bhilai

Article • International Journal of Indian Culture and Business Management, January 2014, Inderscience Publishers

Professor Rupinder Singh
Machinability Index Evaluation: A Case Study of Carbide Inserts

Article • Applied Mechanics and Materials, June 2013, Trans Tech Publications

Professor Rupinder Singh
Experimental Investigations for Statistically Controlled Vacuum Moulding Solutions of Al-SiC MMC

Article • Applied Mechanics and Materials, June 2013, Trans Tech Publications

Professor Rupinder Singh
Effect of Phase Pressure on Casting Properties in Cold Chamber Die Casting Process

Article • Journal of The Institution of Engineers (India) Series C, April 2013, Springer Science + Business Media

Professor Rupinder Singh
Investigating the Effect of Shape Factor, Slurry Layers and Pouring Temperature in Precision Investment Casting

Article • Materials Science Forum, March 2013, Trans Tech Publications

Professor Rupinder Singh
Macro-Model for Development of Al-SiC Metal Matrix Composite with Vacuum Moulding: Designed Experiments

Article • Materials Science Forum, March 2013, Trans Tech Publications

Professor Rupinder Singh
Investigating the Effect of Vulcanization in Tread Rubber Applications

Article • Materials Science Forum, March 2013, Trans Tech Publications

Professor Rupinder Singh
Investigating the effect of moulding sand properties on investment castings: a process capability study

Article • Journal of Mechanical Science and Technology, March 2013, Springer Science + Business Media

Professor Rupinder Singh
Replication of Plastic Components with Silicon Moulding: Designed Experiments

Article • Materials Science Forum, March 2013, Trans Tech Publications

Professor Rupinder Singh
Some investigations for small‐sized product fabrication with FDM for plastic components

Article • Rapid Prototyping Journal, January 2013, Emerald

Professor Rupinder Singh
Effect of process parameters on surface hardness, dimensional accuracy and surface roughness of investment cast components

Article • Journal of Mechanical Science and Technology, January 2013, Springer Science + Business Media

Professor Rupinder Singh
Execution of rapid prototyping technology - an Indian manufacturing industry's perspective

Article • International Journal of Indian Culture and Business Management, January 2013, Inderscience Publishers

Professor Rupinder Singh
Maintenance planning and control of hand tools unit in India: a case study

Article • International Journal of Indian Culture and Business Management, January 2013, Inderscience Publishers

Professor Rupinder Singh
Process Capability Analysis of Vacuum Moulding for Development of Al-Al2O3 MMC

Article • Journal of The Institution of Engineers (India) Series C, January 2013, Springer Science + Business Media

Professor Rupinder Singh
Effect of Workpiece Volume on Shell Wall Thickness Reduction in Rapid Casting of Aluminium using Three Dimensional Printing

Article • International Journal of Automotive and Mechanical Engineering, December 2012, Universiti Malaysia Pahang Publisher

Professor Rupinder Singh
Mathematical modeling for surface hardness in investment casting applications

Article • Journal of Mechanical Science and Technology, November 2012, Springer Science + Business Media

Professor Rupinder Singh
Macro-model for Development of Al-Al2O3 Metal Matrix Composite with Vacuum Moulding: Designed Experiments

Article • Journal of The Institution of Engineers (India) Series C, October 2012, Springer Science + Business Media

Professor Rupinder Singh
Obtaining desired surface roughness of castings produced using ZCast direct metal casting process through Taguchi's experimental approach

Article • Rapid Prototyping Journal, September 2012, Emerald

Professor Rupinder Singh
Mathematical modelling of dimensional accuracy in vacuum assisted casting

Article • Virtual and Physical Prototyping, May 2012, Taylor & Francis

Professor Rupinder Singh
Effect of Workpiece Volume on Statistically Controlled Rapid Casting Solution of Low Melting Alloys Using Three-Dimensional Printing

Article • Materials and Manufacturing Processes, April 2012, Taylor & Francis

Professor Rupinder Singh
Adaptive neuro-fuzzy inference system modeling of cryogenically treated AISI M2 HSS turning tool for estimation of flank wear

Article • Expert Systems with Applications, March 2012, Elsevier

Professor Rupinder Singh
Process capability study of rapid silicon moulding for plastic components

Article • International Journal of Materials Engineering Innovation, January 2012, Inderscience Publishers

Professor Rupinder Singh
Application of fusion deposition modelling for rapid investment casting - a review

Article • International Journal of Materials Engineering Innovation, January 2012, Inderscience Publishers

DR INDERPREET SINGH IPS AHUJA, Professor Rupinder Singh
Electric discharge machining of titanium and its alloys: a review

Article • International Journal of Machining and Machinability of Materials, January 2012, Inderscience Publishers

Professor Rupinder Singh
Flank Wear and Machining Performance of Cryogenically Treated Tungsten Carbide Inserts

Article • Materials and Manufacturing Processes, November 2011, Taylor & Francis

Professor Rupinder Singh
Comparison of Hybrid Rapid Mouldings for Zinc Alloy Castings

Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

Professor Rupinder Singh
Failure Mode and Effect Analysis of a Thermal Power Plant for Enhancing its Reliability

Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

Professor Rupinder Singh
Experimental Investigations for Silicon Moulding Solution of Plastic Components

Article • Materials Science Forum, October 2011, Trans Tech Publications

Professor Rupinder Singh
Experimental Investigations for Rapid Moulding Solution of Plastics Using Polyjet Printing

Article • Materials Science Forum, October 2011, Trans Tech Publications

Professor Rupinder Singh
Experimental Investigations for Development of Pattern for Dies Using FDM

Article • Materials Science Forum, October 2011, Trans Tech Publications

Professor Rupinder Singh
Metallurgical Affects of Three Dimensional Printing Based Rapid Casting Solution

Article • Materials Science Forum, October 2011, Trans Tech Publications

Professor Rupinder Singh
Effect of Cryogenic Treatment on AISI M2 High Speed Steel: Metallurgical and Mechanical Characterization

Article • Journal of Materials Engineering and Performance, August 2011, Springer Science + Business Media

Professor Rupinder Singh
Rapid casting solutions: a review

Article • Rapid Prototyping Journal, August 2011, Emerald

Professor Rupinder Singh
Comparison of Statistically Controlled Rapid Casting Solutions of Zinc Alloys using Three Dimensional Printing

Article • International Journal of Automotive and Mechanical Engineering, June 2011, Universiti Malaysia Pahang Publisher

Professor Rupinder Singh
Effect of Moulding Sand Properties on Cost Effective Hybrid Rapid Casting Solution for Zinc Alloy

Article • Advanced Materials Research, June 2011, Trans Tech Publications

Professor Rupinder Singh
Effect of Work Piece Dimensions on Cost Effective Hybrid Rapid Casting Solution for Aluminium Alloy

Article • Advanced Materials Research, June 2011, Trans Tech Publications

Professor Rupinder Singh
Metallurgical and mechanical characteristics of cryogenically treated tungsten carbide (WC–Co)

Article • The International Journal of Advanced Manufacturing Technology, May 2011, Springer Science + Business Media

Professor Rupinder Singh
Process capability study of polyjet printing for plastic components

Article • Journal of Mechanical Science and Technology, April 2011, Springer Science + Business Media

Professor Rupinder Singh
The microstructure and mechanical properties of friction stir welded Al–Zn–Mg alloy in as welded and heat treated conditions

Article • Materials & Design (1980-2015), February 2011, Elsevier

Professor Rupinder Singh
Investigation on wear behaviour of cryogenically treated TiAlN coated tungsten carbide inserts in turning

Article • International Journal of Machine Tools and Manufacture, January 2011, Elsevier

Professor Rupinder Singh
Functional stability of a hybrid anaerobic digester/microbial fuel cell system treating municipal wastewater

Article • Bioresource Technology, January 2011, Elsevier

Professor Rupinder Singh
Process capability study of ultrasonic machining for titanium alloys

Article • International Journal of Materials Engineering Innovation, January 2011, Inderscience Publishers

Professor Rupinder Singh
Reliability centred maintenance in a thermal power plant: a case study

Article • International Journal of Productivity and Quality Management, January 2011, Inderscience Publishers

Professor Rupinder Singh
Ultrasonic machining of titanium and its alloys: a state of art review and future prospective

Article • International Journal of Machining and Machinability of Materials, January 2011, Inderscience Publishers

Professor Rupinder Singh
Investigation of Surface Properties in Manganese Powder Mixed Electrical Discharge Machining of OHNS And D2 Die Steels

Article • International Journal of Automotive and Mechanical Engineering, December 2010, Universiti Malaysia Pahang Publisher

Professor Rupinder Singh
Metallurgical principles of cryogenically treated tool steels—a review on the current state of science

Article • The International Journal of Advanced Manufacturing Technology, September 2010, Springer Science + Business Media

Professor Rupinder Singh
Effect of moulding sand on statistically controlled hybrid rapid casting solution for zinc alloys

Article • Journal of Mechanical Science and Technology, August 2010, Springer Science + Business Media

Professor Rupinder Singh
Comparison of Statistically Controlled Machining Solutions of Titanium Alloys using USM

Article • International Journal of Automotive and Mechanical Engineering, June 2010, Universiti Malaysia Pahang Publisher

Professor Rupinder Singh
Transmural Ultrasound-based Visualization of Patterns of Action Potential Wave Propagation in Cardiac Tissue

Article • Annals of Biomedical Engineering, May 2010, Springer Science + Business Media

Professor Rupinder Singh
Investigating surface properties of OHNS die steel after electrical discharge machining with manganese powder mixed in the dielectric

Article • The International Journal of Advanced Manufacturing Technology, February 2010, Springer Science + Business Media

Professor Rupinder Singh
Study of statistically controlled surface roughness solution in machining of titanium alloys using ultrasonic machining

Article • International Journal of Engineering Systems Modelling and Simulation, January 2010, Inderscience Publishers

Professor Rupinder Singh
Three Dimensional Printing for Casting Applications: A State of Art Review and Future Perspectives

Article • Advanced Materials Research, December 2009, Trans Tech Publications

Professor Rupinder Singh
Cryoprocessing of cutting tool materials—a review

Article • The International Journal of Advanced Manufacturing Technology, August 2009, Springer Science + Business Media

Professor Rupinder Singh
Surface modification by electrical discharge machining: A review

Article • Journal of Materials Processing Technology, April 2009, Elsevier

Professor Rupinder Singh
Wear behaviour of cryogenically treated tungsten carbide inserts under dry and wet turning conditions

Article • International Journal of Machine Tools and Manufacture, March 2009, Elsevier

Professor Rupinder Singh
Mathematical modeling of tool wear rate in ultrasonic machining of titanium

Article • The International Journal of Advanced Manufacturing Technology, September 2008, Springer Science + Business Media

Professor Rupinder Singh
Active Tiltrotor Whirl-Flutter Stability Augmentation Using Wing-Flaperon and Swash-plate Actuation

Article • Journal of Aircraft, September 2007, American Institute of Aeronautics and Astronautics (AIAA)

Professor Rupinder Singh
Inherent Dispersion in Restitution Properties Over Space

Article • August 2006, Institute of Electrical & Electronics Engineers (IEEE)

Professor Rupinder Singh

Search Kudos

Main menu

Discover

Subjects on Kudos

Services and resources

Admin

All Stories