Contact

All Stories

  1. Effect of Capping Agent on Structure, Composition, and Optical Properties of Low-Cost Chemically Deposited Zinc Oxide Thin Films and Their Antibacterial Activities

    Article • Bioinorganic Chemistry and Applications, October 2023, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  2. A novel study on the influence of graphene-based nanofluid concentrations on the response characteristics and surface-integrity of Hastelloy C-276 during minimum quantity lubrication

    Article • Heliyon, September 2023, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  3. AZ63/Ti/Zr Nanocomposite for Bone-Related Biomedical Applications

    Article • BioMed Research International, May 2023, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  4. Study on the physicomechanical, fracture-deformation, interface-adhesion, and water-absorption properties of twill fabric cotton-bamboo/epoxy composites

    Article • Journal of Materials Research and Technology, May 2023, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  5. Influence of nano additives on performance and emissions characteristics of a diesel engine fueled with watermelon methyl ester

    Article • Journal of Thermal Engineering, April 2023, Journal of Thermal Engineering

    Dr. RAJKUMAR SIVANRAJU

  6. On the Role of Bioconvection and Activation Energy for MHD-Stretched Flow of Williamson and Casson Nanofluid Transportation across a Porous Medium Past a Permeable Sheet

    Article • Journal of Nanomaterials, January 2023, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  7. Green synthesis, characterizations, and antibacterial activity of silver nanoparticles from Themeda quadrivalvis, in conjugation with macrolide antibiotics against respiratory pathogens

    Article • REVIEWS ON ADVANCED MATERIALS SCIENCE, January 2023, De Gruyter

    Dr. RAJKUMAR SIVANRAJU

  8. Acoustical behavior of camellia sinensis/ananas comosus fiber based uni-directional corrugated panel for sound damping application

    Article • Materials Research Express, December 2022, Institute of Physics Publishing

    Dr. RAJKUMAR SIVANRAJU

  9. A Critical Review on Hygrothermal and Sound Absorption Behavior of Natural-Fiber-Reinforced Polymer Composites

    Article • Polymers, November 2022, MDPI AG

    Dr. RAJKUMAR SIVANRAJU

  10. Novel insights on different treatment of magnesium alloys: A critical review

    Article • Heliyon, November 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  11. Progressive developments and challenges in dissimilar laser welding of steel to various other light alloys (Al/Ti/Mg): A comprehensive review

    Article • Heliyon, November 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  12. Analytical and Experimental Study on Cold-Formed Steel Built-Up Sections for Bending

    Article • Materials, October 2022, MDPI AG

    Dr. RAJKUMAR SIVANRAJU

  13. Multi-response optimization of AISI H11 using Taguchi and Grey relational analysis

    Article • Materials Research Express, October 2022, Institute of Physics Publishing

    Dr. RAJKUMAR SIVANRAJU

  14. Effect of particle size and weight fraction of SiC on the mechanical, tribological, morphological, and structural properties of Al-5.6Zn-2.2Mg-1.3Cu composites using RSM: fabrication, characterization, and modelling

    Article • Heliyon, September 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  15. High Speed Grinding of EN31 Steel with Alumina Nanofluid Coolant

    Article • Advances in Materials Science and Engineering, August 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  16. A Review on Exploration of Magnesium Matrix Composites

    Article • Materials Science Forum, August 2022, Trans Tech Publications

    Dr. RAJKUMAR SIVANRAJU

  17. Copper Based Powder Metallurgy Composite for Electrical Applications

    Article • Materials Science Forum, August 2022, Trans Tech Publications

    Dr. RAJKUMAR SIVANRAJU

  18. Investigation of Mechanical Strength and Weight Fraction of Date Palm Fibre Hybrid Composites Reinforced with Polyethylene

    Article • Materials Science Forum, August 2022, Trans Tech Publications

    Dr. RAJKUMAR SIVANRAJU

  19. Study on the Effect of Adhesive Systems on Physical and Mechanical Behaviour of Kenaf Fiber Reinforced Beech Wood

    Article • Materials Science Forum, August 2022, Trans Tech Publications

    Dr. RAJKUMAR SIVANRAJU

  20. Waste Food Cans Waste Bamboo Wood Based AA8079/SS304/Bamboo Wood Ash Hybrid Nanocomposite for Food Packaging

    Article • Key Engineering Materials, August 2022, Trans Tech Publications

    Dr. RAJKUMAR SIVANRAJU

  21. Influence of Planetary Ball Mill Parameters on Powder Flowability of AlSi10Mg with Niobium Carbide Using Central Composite Design (CCD)

    Article • Advances in Materials Science and Engineering, August 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  22. Investigation of Tensile Properties of Different Infill Pattern Structures of 3D-Printed PLA Polymers: Analysis and Validation Using Finite Element Analysis in ANSYS

    Article • Materials, July 2022, MDPI AG

    Dr. R.A. Ilyas, Dr. RAJKUMAR SIVANRAJU

  23. State of the art review on the sustainable dry machining of advanced materials for multifaceted engineering applications: progressive advancements and directions for future prospects

    Article • Materials Research Express, June 2022, Institute of Physics Publishing

    Dr. RAJKUMAR SIVANRAJU

  24. Development of a Data-Driven Decision-Making System Using Lean and Smart Manufacturing Concept in Industry 4.0: A Case Study

    Article • Mathematical Problems in Engineering, May 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  25. Synthesis and Experimental Investigations of Tribological and Corrosion Performance of AZ61 Magnesium Alloy Hybrid Composites

    Article • Journal of Nanomaterials, May 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  26. Identification of factors affecting noise levels by using data mining and design of experiments analysis techniques: A novel experimental approach

    Article • Journal of Low Frequency Noise Vibration and Active Control, April 2022, SAGE Publications

    Dr. RAJKUMAR SIVANRAJU

  27. Influence of Nanofillers on the Mechanical Characteristics of Natural Fiber Reinforced Polymer Composites

    Article • ECS Transactions, April 2022, The Electrochemical Society

    Dr. RAJKUMAR SIVANRAJU

  28. The Role and Application of 3D Printer in the Automobile Industry

    Article • ECS Transactions, April 2022, The Electrochemical Society

    Dr. RAJKUMAR SIVANRAJU

  29. A Novel Smart Production Management System for the Enhancement of Industrial Sustainability in Industry 4.0

    Article • Mathematical Problems in Engineering, April 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  30. Multiobjective Optimization of EDM Parameters for Rice Husk Ash/Cu/Mg-Reinforced Hybrid Al-0.7Fe-0.6Si-0.375Cr-0.25Zn Metal Matrix Nanocomposites for Engineering Applications: Fabrication and Morphological Analysis

    Article • Journal of Nanomaterials, March 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  31. Design and Analysis of a Low-Cost Electronically Controlled Mobile Ventilator, Incorporating Mechanized AMBU Bag, for Patients during COVID-19 Pandemic

    Article • Journal of Healthcare Engineering, March 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  32. Corrosion Zones of Rebar in High-Volume Fly-Ash Concrete through Potentiodynamic Study in Concrete Powder Solution Extracts: A Sustainable Construction Approach

    Article • Advances in Civil Engineering, March 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  33. UV- and visible-light-driven TiO2/La2O3 and TiO2/Al2O3 nanocatalysts: synthesis and enhanced photocatalytic activity

    Article • Applied Physics A, March 2022, Springer Science + Business Media

    Dr. RAJKUMAR SIVANRAJU

  34. Optimization of FDM Printing Process Parameters on Surface Finish, Thickness, and Outer Dimension with ABS Polymer Specimens Using Taguchi Orthogonal Array and Genetic Algorithms

    Article • Mathematical Problems in Engineering, March 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  35. Flame Resistance Characteristics of Woven Jute Fiber Reinforced Fly Ash Filled Polymer Composite

    Article • Journal of Nanomaterials, February 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  36. Performance Comparison and Critical Finite Element Based Experimental Analysis of Various Forms of Reinforcement Retaining Structural System

    Article • Mathematical Problems in Engineering, February 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  37. Hot corrosion behaviour of constant and pulsed current welded Hastelloy X in Na2SO4, V2O5, and NaCl salt mixture at 900 °C

    Article • Materials Research Express, February 2022, Institute of Physics Publishing

    Dr. RAJKUMAR SIVANRAJU

  38. Implementation of Taguchi and Genetic Algorithm Techniques for Prediction of Optimal Part Dimensions for Polymeric Biocomposites in Fused Deposition Modeling

    Article • International Journal of Biomaterials, January 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  39. Processing of Aluminium-Silicon Alloy with Metal Carbide as Reinforcement through Powder-Based Additive Manufacturing: A Critical Study

    Article • Scanning, January 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  40. Synthesis and Characterization of Mechanical Properties of AA8014 + Si3N4/ ZrO2 Hybrid Composites by Stir Casting Process

    Article • Advances in Materials Science and Engineering, January 2022, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  41. Mechanical properties of micro and Nano-Filler content on polypropylene composites

    Article • Materials Today Proceedings, January 2022, Elsevier

    CE Dr Er Sumanta bhattacharya, Dr. RAJKUMAR SIVANRAJU

  42. Alloy 617 welding of similar and dissimilar materials: A review

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  43. Performance of air plasma sprayed Cr3C2–25NiCr and NiCrMoNb coated X8CrNiMoVNb16–13 alloy subjected to high temperature corrosion environment

    Article • Materials Research Express, January 2022, Institute of Physics Publishing

    Dr. RAJKUMAR SIVANRAJU

  44. Comparative studies on weldability and mechanical characteristics of semi- killed steel using different arc welding technique

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  45. Comparison of Boron Nitride (BN) reinforced sintered and extruded AA2219 nano-hybrid composite particle size effects on mechanical and metallurgical characteristics

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  46. Effects of nanofluids on heat transfer characteristics in shell and tube heat exchanger

    Article • Thermal Science, January 2022, National Library of Serbia

    Dr. RAJKUMAR SIVANRAJU

  47. Effect of nanoadditives on the novel leather fiber/recycled poly(ethylene-vinyl-acetate) polymer composites for multifunctional applications: Fabrication, characterizations, and multiobjective optimization using central composite design

    Article • Nanotechnology Reviews, January 2022, De Gruyter

    Dr. RAJKUMAR SIVANRAJU

  48. Effect of welding speed on the mechanical properties of AA6061 Al alloy joined by friction stir welding

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  49. Evaluation of mechanical properties on kenaf fiber reinforced granite nano filler particulates hybrid polymer composite

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  50. Experimental investigations on properties of MoS2 and TiB2 reinforced aluminium composites

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  51. Heat transfer analysis in counter flow shell and tube heat exchanger using of design of experiments

    Article • Thermal Science, January 2022, National Library of Serbia

    Dr. RAJKUMAR SIVANRAJU

  52. Impact of nano-filler WC on the fracture strength of epoxy resin

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  53. Influence of heat storage materials in a concentrated solar absorber for space heating

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  54. Investigation of machining attributes on machining of alloys under nano fluid MQL environment: A review

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  55. Investigation on thermal conductivity of ceramic particles reinforced polymer composites

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  56. Investigation on thermal properties of tamarind shell particles reinforced hybrid polymer matrix composites

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  57. Mechanical and tribological properties of TiC nano particles reinforced polymer matrix composites

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  58. Mechanical behaviour of nano ceramic particles reinforced aluminium matrix composites

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  59. Mechanical properties of aluminium alloy AA7086 by equal channel angular press with parameters of die design

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  60. Mechanicalproperties of 304 stainless steel plates and friction stir welded Al 2219 alloy

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  61. Performance study on phase change material integrated solar still coupled with solar collector

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  62. Predictive model development in dry turning of Nimonic C263 by artificial neural networks

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  63. Review on application of phase change material for BIPV system

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  64. Degradation Analysis of Jute Fiber Reinforced Waste Tile Powder-Filled Polymer Composite on Wear Characteristics

    Article • International Journal of Polymer Science, December 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  65. Hourly and Day Ahead Power Prediction of Building Integrated Semitransparent Photovoltaic System

    Article • International Journal of Photoenergy, December 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  66. 3D Printing Manufacturing Techniques, Materials, and Applications: An Overview

    Article • Advances in Materials Science and Engineering, December 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  67. Flexural Behaviour of RC Beams with a Circular Opening at the Flexural Zone and Shear Zone Strengthened Using Steel Plates

    Article • Advances in Civil Engineering, December 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  68. Tribological Behavior and Analysis on Surface Roughness of CNC Milled Dual Heat Treated Al6061 Composites

    Article • Advances in Materials Science and Engineering, November 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  69. Influence of Flax Fibre Hybridization on Mechanical Behaviour of Sisal Fibre-Polypropylene Composites Prepared with an Injection Moulding Machine

    Article • Advances in Materials Science and Engineering, November 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  70. Investigation of Mechanical and Durability Properties of Concrete Mixed with Water Exposed to a Magnetic Field

    Article • Advances in Civil Engineering, October 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  71. Influence of Fiber Volume and Fiber Length on Thermal and Flexural Properties of a Hybrid Natural Polymer Composite Prepared with Banana Stem, Pineapple Leaf, and S-Glass

    Article • Advances in Materials Science and Engineering, October 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  72. Investigation on Heat Transfer Enhancement in Microchannel Using Al2O3/Water Nanofluids

    Article • International Journal of Photoenergy, September 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  73. Preface: International Conference on Recent Advancements in Biomedical Engineering - 2021

    Article • Journal of Physics Conference Series, September 2021, Institute of Physics Publishing

    Dr. RAJKUMAR SIVANRAJU

  74. An Unconventional Approach for Analyzing the Mechanical Properties of Natural Fiber Composite Using Convolutional Neural Network

    Article • Advances in Materials Science and Engineering, August 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  75. A facile synthesis of Ag/ZnO nanocomposites prepared via novel green mediated route for catalytic activity

    Article • Applied Physics A, August 2021, Springer Science + Business Media

    Dr. RAJKUMAR SIVANRAJU

  76. Weldability Investigation and Optimization of Process Variables for TIG-Welded Aluminium Alloy (AA 8006)

    Article • Advances in Materials Science and Engineering, July 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  77. Strength Enhancement Study on Composites of AA6066 Aluminium Alloy with Magnesium Oxide and Coal Ash

    Article • Advances in Materials Science and Engineering, July 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  78. Study on Compaction and Machinability of Silicon Nitride (Si3N4) Reinforced Copper Alloy Composite through P/M Route

    Article • International Journal of Polymer Science, July 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  79. Improving the Mechanical Properties of Natural Fiber Composites of Hemp Fiber with Ramie and Banana Fiber through Compression Molding Method

    Article • Advances in Materials Science and Engineering, July 2021, Hindawi Publishing Corporation

    Dr. RAJKUMAR SIVANRAJU

  80. Hybrid Multi-Sensor Integration for Static or Dynamic Obstacle Detection, Tracking and Classification for Autonomous Vehicle

    Article • Journal of University of Shanghai for Science and Technology, June 2021, ADD Technologies

    Dr. RAJKUMAR SIVANRAJU

  81. Influence of Filler Wire and Welding Process to Mitigate the Microsegregation of Alloy C-2000 Using Continuous and Pulsed Current Gas Tungsten Arc Welding Techniques

    Article • Journal of Materials Engineering and Performance, May 2021, Springer Science + Business Media

    Dr. RAJKUMAR SIVANRAJU

  82. Dieless Friction Stir Extrusion-Brazing (DFSE-B) of AA2024-T3 aluminum alloy to Copper with Zn interlayer

    Article • Results in Physics, May 2021, Elsevier

    Dr Olatunji Oladimeji Ojo, Dr. RAJKUMAR SIVANRAJU

  83. An insight into stress and strain analysis over on hexagonal aluminium sandwich honeycomb with various thickness glass fiber face sheets

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  84. Experimental evaluation of mechanical properties of polymer matrix composites reinforced with date palm frond fibers from Oman

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  85. Investigation on mechanical properties of AA2024/HBN composites prepared by stir casting method

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  86. Taguchi optimization of drilling process parameters on LM13/10 wt%Graphene composites made by stir casting process

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  87. Tensile and flexural properties of natural fibre matrix composites developed through hand-lay method

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  88. The roles and applications of additive manufacturing in the aerospace and automobile sector

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  89. Influence of temperature on flat-wise tensile strength of Al3003 honeycomb sandwich panels

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  90. Parametric optimization of electrical discharge machining on AI-TiC composites using Grey relational analysis

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  91. Performance analysis of compression ignition (CI) engine using biodiesel

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  92. Strength and stiffness characteristics of A3003 aluminum honeycomb core sandwich panels

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  93. Synthesis of TiO 2 nanostructures by green approach as photoanodes for dye‐sensitized solar cells

    Article • International Journal of Energy Research, October 2020, Wiley

    Dr. RAJKUMAR SIVANRAJU

  94. Experimental Investigation of Tensile Strength of Fiber Reinforced Polyester by Using Chicken Feather Fiber

    Article • Journal of New Materials for Electrochemical Systems, January 2020, Journal of New Materials for Electrochemical Systems

    Dr. RAJKUMAR SIVANRAJU

  95. Investigation of Mechanical Behaviour on Composites of Al6063 Alloy with Silicon, Graphite and Fly Ash

    Article • Journal of New Materials for Electrochemical Systems, January 2020, Journal of New Materials for Electrochemical Systems

    Dr. RAJKUMAR SIVANRAJU

  96. Investigation on Microstructure and Mechanical Properties of Corrosion Resistance Alloy C-2000 Fabricated by Conventional Arc Welding Technique

    Article • October 2019, SAE International

    Dr Arivazhagan Natarajan, Dr. RAJKUMAR SIVANRAJU

  97. EMPOWERING STUDENTS TO BECOME EFFECTIVE LEARNERS THROUGH ACTIVITY BASED LEARNING

    Article • Humanities & Social Sciences Reviews, September 2019, GIAP Journals

    Dr. RAJKUMAR SIVANRAJU

  98. Enhanced performance of dye-sensitized solar cells using natural cocktail dye as sensitizer

    Article • Optik, February 2019, Elsevier

    Dr. RAJKUMAR SIVANRAJU

  99. Mechanical properties of 7075-t6 aluminium alloy surface hybrid composites synthesised by friction stir processing

    Article • International Journal of Rapid Manufacturing, January 2019, Inderscience Publishers

    Dr. RAJKUMAR SIVANRAJU

  100. Performance Analysis of Compression Ignition (CI) Engine Using Bio Fuels

    Article • International Journal of Mechanical and Production Engineering Research and Development, January 2019, Transstellar Journal Publications and Research Consultancy Private Limited

    Dr. RAJKUMAR SIVANRAJU

  101. The Effects of TiC Reinforcement on Thermal, Electrical and Dry Sliding Wear Behaviour of Aluminium Matrix Nanocomposites

    Article • International Journal of Mechanical and Production Engineering Research and Development, January 2018, Transstellar Journal Publications and Research Consultancy Private Limited

    Dr. RAJKUMAR SIVANRAJU

  102. Analysis of Physical and Mechanical Properties of A3003 Aluminum Honeycomb Core Sandwich Panels

    Article • Applied Mechanics and Materials, July 2017, Trans Tech Publications

    Manikandan Manonharan, Dr. RAJKUMAR SIVANRAJU

  103. Evaluation of elastic constants of A3003 honeycomb core with varying hexagonal cell geometries through finite element approach

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, November 2013, SAGE Publications

    Dr. RAJKUMAR SIVANRAJU

  104. Compression Behavior of Adhesive Butt Joints of Aluminum Hexagonal Core Sandwich Panels with Different Edging Configurations

    Article • Advanced Materials Research, March 2012, Trans Tech Publications

    Dr. RAJKUMAR SIVANRAJU