All Stories

  1. A study of geo-polymer as alternative material in automotive brake pad

    Article • January 2021, American Institute of Physics

    Mr Suhaimi Hassan, Associate Prof. Dr Norinsan Kamil Othman, Zaidi Embong, Shahruddin Mahzan

  2. The morphology of Pb-free Sn – 3.0Ag – 0.5Cu solder reinforced by NiO nanoparticles

    Article • January 2019, American Institute of Physics

    Associate Prof. Dr Norinsan Kamil Othman

  3. SAC–xTiO2 nano-reinforced lead-free solder joint characterizations in ultra-fine package assembly

    Article • Soldering & Surface Mount Technology, February 2018, Emerald

    Associate Prof. Dr Norinsan Kamil Othman, Prof Azman Jalar, Fakhrozi Che Ani

  4. High Temperature Oxidation Behaviour of Ni-Cr-, Ti- and Fe-Based Alloys in Flowing Wet Gas Environment

    Article • Materials Science Forum, March 2017, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  5. Electrochemical and XPS Studies of Benzalkonium Chloride for Carbon Steel Protection in Hydrochloric Acid

    Article • Materials Science Forum, March 2017, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  6. The Relationship between XRD Peak Intensity and Mechanical Properties of Irradiated Lead-Free Solder

    Article • Materials Science Forum, March 2017, Trans Tech Publications

    Prof Azman Jalar, Associate Prof. Dr Norinsan Kamil Othman, maria abu bakar, Wilfred Paulus

  7. Bondability and Strength Evaluation of Gold Ball Bond Using Nanoindentation Approach

    Article • Key Engineering Materials, July 2016, Trans Tech Publications

    Prof Azman Jalar, Associate Prof. Dr Norinsan Kamil Othman

  8. Nanoindentation Study on Heat Treated Gold Wire Bonding

    Article • Materials Science Forum, May 2016, Trans Tech Publications

    Prof Azman Jalar, Associate Prof. Dr Norinsan Kamil Othman

  9. Electrochemical Migration Behaviours of Low Silver Content Solder Alloy SAC 0307 on Printed Circuit Boards (PCBs) in NaCl Solution

    Article • Materials Science Forum, March 2016, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman, Prof Azman Jalar, Zambri Samsudin

  10. A Study on the UV Photoresponse of Hydrothermally Grown Zinc Oxide Nanorods With Different Aspect Ratios

    Article • IEEE Sensors Journal, December 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof. Dr Norinsan Kamil Othman, Naif Al-Hardan

  11. The influence of temperature on the inhibition of carbon steel corrosion in acidic lignin

    Article • Anti-Corrosion Methods and Materials, September 2015, Emerald

    Associate Prof. Dr Norinsan Kamil Othman, Prof Azman Jalar

  12. Corrosion behavior of Al6061 alloy weldment produced by friction stir welding process

    Article • Journal of Materials Research and Technology, July 2015, Elsevier

    Professor ROBIAH YUNUS, Associate Prof. Dr Norinsan Kamil Othman

  13. Electrochemical Behavior of Carbon Steel in Acidic Medium Containing Cationic Inhibitor

    Article • Advanced Materials Research, June 2015, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman, Mr mohd nazri idris

  14. High Temperature Corrosion With Corrosive environment

    Article • Advanced Materials Research, June 2015, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman, Prof Azman Jalar

  15. Efficiency of inhibitor for biocorrosion influenced by consortium sulfate reducing bacteria on carbon steel

    Article • January 2015, American Institute of Physics

    Associate Prof. Dr Norinsan Kamil Othman

  16. Investigation of the nugget zone corrosion behavior in friction stir welded lap joints of 6061-T6 aluminum alloy

    Article • Materials Research, December 2014, FapUNIFESP (SciELO)

    Professor ROBIAH YUNUS, Associate Prof. Dr Norinsan Kamil Othman

  17. Effects of thermal cycling on the mechanical properties of gold wire bonding

    Article • August 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof. Dr Norinsan Kamil Othman

  18. Microstructural evolution and micromechanical properties of gamma-irradiated Au ball bonds

    Article • Materials Characterization, July 2014, Elsevier

    Associate Prof. Dr Norinsan Kamil Othman

  19. Corrosion behavior of friction stir welded lap joints of AA6061-T6 aluminum alloy

    Article • Materials Research, June 2014, FapUNIFESP (SciELO)

    Professor ROBIAH YUNUS, Associate Prof. Dr Norinsan Kamil Othman

  20. Properties and Growth Rate of Intermetallic Al-Fe through Hot Dipped Aluminizing

    Article • Advanced Materials Research, June 2014, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  21. pH-dependent magnetic phase transition of iron oxide nanoparticles synthesized by gamma-radiation reduction method

    Article • Journal of Radioanalytical and Nuclear Chemistry, May 2014, Springer Science + Business Media

    Associate Prof. Dr Norinsan Kamil Othman

  22. Influence of rotational speed on mechanical properties of friction stir lap welded 6061-T6 Al alloy

    Article • Transactions of Nonferrous Metals Society of China, April 2014, Elsevier

    Associate Prof. Dr Norinsan Kamil Othman

  23. Radiolytic Formation of Fe3O4 Nanoparticles: Influence of Radiation Dose on Structure and Magnetic Properties

    Article • PLoS ONE, March 2014, PLOS

    Associate Prof. Dr Norinsan Kamil Othman

  24. High Temperature Storage and Gamma Radiation Effects on Mechanical Properties of Stacked Die Package

    Article • Advanced Materials Research, February 2014, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  25. Tannin bark Melalauca cajuputi powell (gelam) as green corrosion inhibitor of mild steel

    Article • January 2014, American Institute of Physics

    Associate Prof. Dr Norinsan Kamil Othman

  26. Characterization of Oxide Growth on Surface of Al-Mg-Si Welded Joint

    Article • Advances in Materials Science and Engineering, January 2014, Hindawi Publishing Corporation

    Associate Prof. Dr Norinsan Kamil Othman

  27. Synthesis of CdS Nanoparticles via AOT-Water-n-Heptane Microemulsion Technique

    Article • Materials Science Forum, May 2013, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  28. The Performance of Nanosilicate from Rice Husk Ash as Green Corrosion Inhibitor for Carbon Steel in 0.5M HCl

    Article • Materials Science Forum, May 2013, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  29. The Effect of Double Sided Gas Metal Arc Weld with ER4043 and ER5356 Filler Metals on AA 6061-T6 Plates

    Article • Advanced Science Letters, March 2013, American Scientific Publishers

    Associate Prof. Dr Norinsan Kamil Othman

  30. Gamma-irradiation effect on material properties behaviour of semiconductor package

    Article • January 2013, American Institute of Physics

    Associate Prof. Dr Norinsan Kamil Othman

  31. Morphological and microstructural studies on aluminizing coating of carbon steel

    Article • January 2013, American Institute of Physics

    Associate Prof. Dr Norinsan Kamil Othman

  32. Influence of temperature on corrosion inhibition for carbon steel by rice straw extract in HCl solution: Synergistic effect of cationic surfactant

    Article • January 2013, American Institute of Physics

    Associate Prof. Dr Norinsan Kamil Othman

  33. Oxidation behaviour of ferritic stainless steel grade Crofer 22 APU at 700 °C in flowing Ar−75%CO2−12%H2O

    Article • January 2013, American Institute of Physics

    Associate Prof. Dr Norinsan Kamil Othman

  34. High temperature corrosion of welded ferritic stainless steel in flowing CO[sub 2] gas

    Article • January 2013, American Institute of Physics

    Associate Prof. Dr Norinsan Kamil Othman

  35. A review on radiation-induced nucleation and growth of colloidal metallic nanoparticles

    Article • Nanoscale Research Letters, January 2013, Springer Science + Business Media

    Associate Prof. Dr Norinsan Kamil Othman

  36. Nanoindentation creep analysis of gold ball bond

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof. Dr Norinsan Kamil Othman

  37. Radiation exposure induced failure on semiconductor package material

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof. Dr Norinsan Kamil Othman

  38. Some thoughts on bondability and strength of gold wire bonding

    Article • Gold Bulletin, August 2012, Springer Science + Business Media

    Associate Prof. Dr Norinsan Kamil Othman

  39. Nanoindentation Stereometry of Wire Bonding

    Article • Advanced Science Letters, June 2012, American Scientific Publishers

    Associate Prof. Dr Norinsan Kamil Othman

  40. High Temperature Corrosion of Fe-30Cr in Flowing CO2 Gas

    Article • Advanced Materials Research, April 2012, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  41. Post-Weld Oxidation Behavior of AA6061 Al Alloy

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  42. Gamma Irradiation Effect on Load-Deflection Curve of Semiconductor Package

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  43. The re-evaluation of mechanical properties of wire bonding

    Article • October 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Associate Prof. Dr Norinsan Kamil Othman

  44. Oxidation Effect of Welded AA6061 Al Alloy Using ER5356 Filler Metal

    Article • Applied Mechanics and Materials, July 2011, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  45. Oxidation Effect on Welded AA6061 Al Alloy Using ER4043 Filler Metal

    Article • Applied Mechanics and Materials, July 2011, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  46. Effect of Gamma-Irradiation towards Stress-Strain Curve of Single Die QFN Package

    Article • Materials Science Forum, July 2011, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  47. Effect of Porosity on Tensile Behaviour of Welded AA6061-T6 Aluminium Alloy

    Article • Applied Mechanics and Materials, July 2011, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  48. Effect of Different Filler Towards Welding of AA6061 Al Alloy by X-Ray CT Scan

    Article • Advanced Materials Research, October 2010, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman

  49. The Effect of Filler ER4043 and ER5356 on Porosity Distribution of Welded AA6061 Aluminum Alloy

    Article • Advanced Materials Research, October 2010, Trans Tech Publications

    Associate Prof. Dr Norinsan Kamil Othman