All Stories

  1. Finite element analysis of critical shaft speed in Jatropha separator machine for enhanced biodiesel production
  2. Preparation and Characterization of Oil Palm Empty Fruit Bunch-Based Cellulose for Levulinic Acid Production
  3. Design of a separator machine for oil palm fruit mesocarp and nut using computer‐aided design and linear finite element analysis
  4. Kinetics Study on the Production of Biodegradable Lubricant by Enzymatic Transesterification of High Oleic Palm Oil
  5. Enzymatic Synthesis of Palm Oil-Based Trimethylolpropane Ester as Biolubricant Base Stock Catalyzed by Biocatalyst from Candida Antarctica (Lipozyme 435)
  6. Field efficacy of palm oil-based nanoemulsion insecticides against Aedes aegypti in Malaysia
  7. Recent advances in the application of cellulose derivatives for removal of contaminants from aquatic environments
  8. Kinetics and thermodynamics of synthesis of palm oil-based trimethylolpropane triester using microwave irradiation
  9. Centrifugal separation‐assisted and extraction of crude palm oil from separated mesocarp fiber: Central composite design optimization
  10. Effect of Ultrasonic-Assisted Acid Pretreatment on Production of Levulinic Acid Through Acid Hydrolysis
  11. Effect of molecular structure on oxidative degradation of ester based transformer oil
  12. Subcritical water extraction of essential oil from Aquilaria malaccensis leaves
  13. Modelling of Molasses Fermentation for Bioethanol Production: A Comparative Investigation of Monod and Andrews Models Accuracy Assessment
  14. Overview of Alternative Ethanol Removal Techniques for Enhancing Bioethanol Recovery from Fermentation Broth
  15. Impact of Fe3O4, CuO and Al2O3 on the AC Breakdown Voltage of Palm Oil and Coconut Oil in the Presence of CTAB
  16. Effects of Molecular Structure on the Physical, Chemical, and Electrical Properties of Ester‐Based Transformer Insulating Liquids
  17. Experimental Evaluation of Napier Grass Gasification in an Autothermal Bubbling Fluidized Bed Reactor
  18. Enhanced biodiesel synthesis from palm fatty acid distillate and modified sulfonated glucose catalyst via an oscillation flow reactor system
  19. Response Surface Method in the Optimization of a Rotary Pan-Equipped process for Increased Efficiency of Slow-Release Coated Urea
  20. Appraisal of Sulphonation Processes to Synthesize Palm Waste Biochar Catalysts for the Esterification of Palm Fatty Acid Distillate
  21. Green Biofuel Production via Catalytic Pyrolysis of Waste Cooking Oil using Malaysian Dolomite Catalyst
  22. Effects of different types of surfactants on AC breakdown voltage of refined, bleached and deodorized palm oil based CuO nanofluids
  23. Influence of Electrode Geometry on the Lightning Impulse Breakdown Voltage of Palm Oil
  24. Modified sulfonation method for converting carbonized glucose into solid acid catalyst for the esterification of palm fatty acid distillate
  25. Pre-breakdown streamer propagation and breakdown characteristics of refined bleached and deodorized palm oil under lightning impulse voltage
  26. Nonionic polyol esters as thinner and lubricity enhancer for synthetic-based drilling fluids
  27. Performance stability of solid-state polypyrrole-reduced graphene oxide-modified carbon bundle fiber for supercapacitor application
  28. Tribological characteristics comparison of formulated palm trimethylolpropane ester and polyalphaolefin for cam/tappet interface of direct acting valve train system
  29. Review of biodegradable synthetic-based drilling fluid: Progression, performance and future prospect
  30. Physiochemical and Electrical Properties of Refined, Bleached and Deodorized Palm Oil under High Temperature Ageing for Application in Transformers
  31. Palm-Based Neopentyl Glycol Diester: A Potential Green Insulating Oil
  32. Ageing Study of Palm Oil and Coconut Oil in the Presence of Insulation Paper for Transformers Application
  33. Laboratory Evaluation on Ammonia Volatilization from Coated Urea Fertilizers
  34. Enhanced coagulant extraction from Jatropha curcas in aqueous solutions and the application in turbidity removal
  35. Modified local carbonate mineral as deoxygenated catalyst for biofuel production via catalytic pyrolysis of waste cooking oil
  36. Tribological compatibility analysis of conventional lubricant additives with palm trimethylolpropane ester (TMP) and tetrahedral amorphous diamond-like carbon coating (ta-C)
  37. Investigation on the electrical properties of palm oil and coconut oil based TiO2 nanofluids
  38. Synthesis of biodiesel from palm fatty acid distillate using sulfonated palm seed cake catalyst
  39. Determination of sugars composition in abscission zone of oil palm fruit
  40. SIMULATION MODEL OF NANO AND CONVENTIONAL DRILLING FLUIDS PERFORMANCE IN HORIZONTAL WELL
  41. Coagulative Behaviour ofJatropha curcasand its Performance in Wastewater Treatment
  42. Electrodeposition of Polypyrrole and Reduced Graphene Oxide onto Carbon Bundle Fibre as Electrode for Supercapacitor
  43. Chemically active oil filter to develop detergent free bio-based lubrication for diesel engine
  44. Screening of solid base catalysts on palm oil based biolubricant synthesis
  45. Single step encapsulation process of tamoxifen in biodegradable polymer using supercritical anti-solvent (SAS) process
  46. Physical and mechanical properties of fresh and sterilized oil palm fruitlets
  47. Removal of Zinc from Aqueous Solution by Optimized Oil Palm Empty Fruit Bunches Biochar as Low Cost Adsorbent
  48. Elastomeric Nanocomposite Based on Exfoliated Graphene Oxide and Its Characteristics without Vulcanization
  49. Performance Evaluation of Polyol Esters from Palm Oil as a Lubricant for Bentonite Suspension Drilling Fluid
  50. Post-functionalization of polymeric mesoporous C@Zn core–shell spheres used for methyl ester production
  51. Synthesis of Different Layers of Graphene on Stainless Steel Using the CVD Method
  52. Investigation of the Structure and Hardness of Quenched Sintered Materials Produced from Iron-Base Alloyed Powders (Astaloy E)
  53. Dispersion Stability and Tribological Characteristics of TiO2/SiO2 Nanocomposite-Enriched Biobased Lubricant
  54. The effect of polarity on the lightning breakdown voltages of palm oil and coconut oil under a non-uniform field for transformers application
  55. Assessing the kinetic model of hydro-distillation and chemical composition of Aquilaria malaccensis leaves essential oil
  56. Degradation of enriched biodiesel under different storage conditions
  57. Biodiesel production in the presence of sulfonated mesoporous ZnAl2O4 catalyst via esterification of palm fatty acid distillate (PFAD)
  58. Development of palm-based neopentyl glycol diester as dielectric fluid and its thermal aging performance
  59. Performance evaluation and cfd multiphase modeling for Multistage Jatropha Fruit Shelling Machine
  60. Investigation on the Dielectric, Physical and Chemical Properties of Palm Oil and Coconut Oil under Open Thermal Ageing Condition
  61. Biodiesel production fromCannabis sativaoil from Pakistan
  62. Corrosion evaluation of friction stir welded lap joints of AA6061-T6 aluminum alloy
  63. Nanomechanical Behavior of Multi-Walled Carbon Nanotubes Particulate Reinforced Aluminum Nanocomposites Prepared by Ball Milling
  64. Conversion of Oleum papaveris seminis oil into methyl esters via esterification process: Optimization and kinetic study
  65. Synthesis of high oleic palm oil-based trimethylolpropane esters in a vacuum operated pulsed loop reactor
  66. Effects of Thickness and Amount of Carbon Nanofiber Coated Carbon Fiber on Improving the Mechanical Properties of Nanocomposites
  67. Evaluation on the Lightning Breakdown Voltages of Palm Oil and Coconut Oil under Non-Uniform Field at Small Gap Distances
  68. Temperature effect on tribological properties of polyol ester-based environmentally adapted lubricant
  69. Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester
  70. Mechanical and structural evaluation of friction stir welded 6061 aluminium alloy lap joints at different welding speeds
  71. Synthesis of Carbon Nanotube-Carbon Nanosphere on the CF Surface by CVD
  72. A review of processing and machinery for Jatropha curcas L. fruits and seeds in biodiesel production: Harvesting, shelling, pretreatment and storage
  73. New coating formulation for the slow release of urea using a mixture of gypsum and dolomitic limestone
  74. Performance and exhaust emission characteristics of direct-injection diesel engine fueled with enriched biodiesel
  75. A review of biolubricants in drilling fluids: Recent research, performance, and applications
  76. Cold flow and fuel properties of methyl oleate and palm-oil methyl ester blends
  77. A study on the AC breakdown voltages of as-received palm oil and coconut oil under presence of TiO2
  78. Performance Study of a Jatropha Curcas L. Fruit Shelling Machine for Kernel Recovery in Biodiesel Production
  79. Methyl ester production from palm fatty acid distillate using sulfonated glucose-derived acid catalyst
  80. A Study on the Dielectric Properties of RBDPO Olein under Low Temperature Thermal Ageing
  81. A Study on the Lightning Impulse Breakdown Voltages of Palm Oil and Coconut Oil by Different Methods
  82. Effects of CNTs content and milling time on mechanical behavior of MWCNT-reinforced aluminum nanocomposites
  83. Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS2 nanoparticles
  84. Tau method for the numerical solution of a fuzzy fractional kinetic model and its application to the oil palm frond as a promising source of xylose
  85. Synthesis of Biodiesel through Catalytic Transesterification of Various Feedstocks using Fast Solvothermal Technology: A Critical Review
  86. Study on the Spectrophotometric Detection of Free Fatty Acids in Palm Oil Utilizing Enzymatic Reactions
  87. Corrosion behavior of Al6061 alloy weldment produced by friction stir welding process
  88. Microstructural evaluation of ball-milled nano Al2O3particulate-reinforced aluminum matrix composite powders
  89. Synthesis and Optimization of 2-ethylhexyl Ester as Base Oil for Drilling Fluid Formulation
  90. Effect of growing graphene flakes on branched carbon nanofibers based on carbon fiber on mechanical and thermal properties of polypropylene
  91. Effects of the surface modification of carbon fiber by growing different types of carbon nanomaterials on the mechanical and thermal properties of polypropylene
  92. Palm Oil Derived Trimethylolpropane Triesters Synthetic Lubricants and Usage in Industrial Metalworking Fluid
  93. Few- and multi-layer graphene on carbon fibers: synthesis and application
  94. Transesterification for Biodiesel Production UsingThespesia PopulneaSeed Oil: An Optimization Study
  95. Comparative performance of different urea coating materials for slow release
  96. Investigation of the nugget zone corrosion behavior in friction stir welded lap joints of 6061-T6 aluminum alloy
  97. Application of response surface methodology (RSM) for optimizing the palm-based pentaerythritol ester synthesis
  98. A study on the dielectric properties of Palm Oil and Coconut Oil
  99. CFD analysis chlorine gas dispersion in indoor storage: Temperatures with wind velocities effect studies
  100. Examination on the lightning breakdown strength of biodegradable oil under quasi-uniform field
  101. Investigation on the lightning breakdown voltage of Palm Oil and Coconut Oil under non-uniform field
  102. Bulk Production of High-Purity Carbon Nanosphere by Combination of Chemical Vapor Deposition Methods
  103. Low-Temperature Dilute Acid Hydrolysis of Oil Palm Frond
  104. Kapok oil methyl esters
  105. Methods for coating solid-phase microextraction fibers with carbon nanotubes
  106. ChemInform Abstract: Carbohydrate-Derived Solid Acid Catalysts for Biodiesel Production from Low-Cost Feedstocks: A Review
  107. Corrosion behavior of friction stir welded lap joints of AA6061-T6 aluminum alloy
  108. Occurrence of Pattern Formation of Microstructural, Physical and Mechanical Properties of Sintered PM Steels Containing Pre-Alloyed Astaloy E Powder
  109. Development and testing of a Jatropha fruit shelling process for shell-free kernel recovery in biodiesel production
  110. Carbohydrate-derived Solid Acid Catalysts for Biodiesel Production from Low-Cost Feedstocks: A Review
  111. The Effect of Temperature on Tribological Properties of Chemically Modified Bio-Based Lubricant
  112. Synthesis of Ferric–Manganese Doped Tungstated Zirconia Nanoparticles as Heterogeneous Solid Superacid Catalyst for Biodiesel Production From Waste Cooking Oil
  113. Momordica CharantiaSeed Oil Methyl Esters: A Kinetic Study And Fuel Properties
  114. Microwave-assisted Biodiesel Production by Esterification of Palm Fatty Acid Distillate
  115. The Effect of Storage Time of Chopped Oil Palm Fruit Bunches on the Palm Oil Quality
  116. Transesterification Reaction for Synthesis of Palm^|^ndash;based Ethylhexyl Ester and Formulation as Base Oil for Synthetic Drilling Fluid
  117. Synthesis of 1,3-Dichloropropanol from Glycerol Using Muriatic Acid as Chlorinating Agent
  118. Effects Of Graphene Materials On The Performance Of Ester Based Drilling Fluid
  119. An overview of the emerging warm mix asphalt technology
  120. The effect of palm oil trimethylolpropane ester on extreme pressure lubrication
  121. Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant
  122. Production of biodiesel from mixed waste vegetable oils using Ferric hydrogen sulphate as an effective reusable heterogeneous solid acid catalyst
  123. Characterization of CdS Nanoparticles Synthesized Using Microwave-Assisted Polyol Method
  124. Biodiesel from Citrus reticulata (mandarin orange) seed oil, a potential non-food feedstock
  125. Application of Fuzzy Fractional Kinetic Equations to Modelling of the Acid Hydrolysis Reaction
  126. Dynamic Modeling of Reversible Methanolysis ofJatropha curcasOil to Biodiesel
  127. Effect of crude palm oil as plasticiser on the mechanical and morphology properties of low density polyethylene blown film
  128. Transesterification of jatropha oil with methanol over Mg–Zn mixed metal oxide catalysts
  129. Experimental Analysis of Tribological Properties of Biolubricant with Nanoparticle Additive
  130. Synthesis of palm oil-based trimethylolpropane ester as potential biolubricant: Chemical kinetics modeling
  131. Influence of Mineral Filler Particle Size and Type on Rheological and Performance Properties of SMA Asphalt-filler Mastics
  132. Optimisation of solid liquid extraction of jatropha oil using petroleum ether
  133. Synthesis of Jatropha curcas oil-based biodiesel in a pulsed loop reactor
  134. Synthesis and characterization of calcium methoxide as heterogeneous catalyst for trimethylolpropane esters conversion reaction
  135. Activity of Calcium Methoxide Catalyst for Synthesis of High Oleic Palm Oil Based Trimethylolpropane Triesters as Lubricant Base Stock
  136. Effect of supercritical fluid density on nanoencapsulated drug particle size using the supercritical antisolvent method
  137. The kinetics of epoxidation of trimethylolpropane ester
  138. Innovative Method to Produce High-Purity Graphitic Carbon Nanospheres
  139. Comparative study of the methanolysis and ethanolysis of Maize oil using alkaline catalysts
  140. Solid Liquid Extraction of Jatropha Seeds by Microwave Pretreatment and Ultrasound Assisted Methods
  141. Kinetics of the transesterification ofJatropha curcastriglyceride with an alcohol in the presence of an alkaline catalyst
  142. Transesterification of non-edible Jatropha curcas oil to biodiesel using binary Ca–Mg mixed oxide catalyst: Effect of stoichiometric composition
  143. Simple guidelines for a self-built laboratory-scale supercritical anti-solvent system
  144. Process optimization design for jatropha-based biodiesel production using response surface methodology
  145. Desorption of β-carotene from mesoporous carbon coated monolith: Isotherm, kinetics and regeneration studies
  146. Response Surface Methodology for Optimization of Epoxidized Trimethylolpropane Ester Synthesis from Palm Oil
  147. Response Surface Methodology for Optimization of Epoxidized Trimethylolpropane Ester Synthesis from Palm Oil
  148. A preliminary study onJatropha curcasas coagulant in wastewater treatment
  149. Effect of additives on lubrication properties of palm oil-based trimethylolpropane ester for hydraulic fluid application
  150. Erratum
  151. Effect of storage of shelled Moringa oleifera seeds from reaping time on turbidity removal
  152. Single and binary adsorptions isotherms of Cd(II) and Zn(II) on palm kernel shell based activated carbon
  153. Effect of physical pretreatment on dilute acid hydrolysis of water hyacinth (Eichhornia crassipes)
  154. Characterization of empty fruit bunch for microwave-assisted pyrolysis
  155. The Effects of Thermal History on Tensile Properties of Poly(vinyl chloride) and its Composite with Sugarcane Bagasse
  156. Tensile and Impact Properties of Sugarcane Bagasse/Poly(vinyl Chloride) Composites
  157. Mechanical Properties of Carbon Fiber-Reinforced Polypropylene Composites
  158. Calcium-based mixed oxide catalysts for methanolysis of Jatropha curcas oil to biodiesel
  159. Preliminary Design of Semi-Batch Reactor for Synthesis 1,3-Dichloro-2-Propanol Using Aspen Plus
  160. Effect of short carbon fiber surface treatment on composite properties
  161. Effect of ultrasonic pre-treatment on low temperature acid hydrolysis of oil palm empty fruit bunch
  162. Properties of sugarcane bagasse/ poly(vinyl chloride) composites after various treatments
  163. Elastic and viscoelastic properties of sugarcane bagasse-filled poly(vinyl chloride) composites
  164. Adsorption of β-carotene onto mesoporous carbon coated monolith in isopropyl alcohol and n-hexane solution: equilibrium and thermodynamic study
  165. Time Based Intrusion Detection on Fast Attack for Network Intrusion Detection System
  166. An improved traditional worm attack pattern
  167. Flexural properties of sugarcane bagasse pith and rind reinforced poly(vinyl chloride)
  168. Utilization of MATLAB to Simulate Kinetics of Transesterification of Palm Oil-Based Methyl Esters with Trimethylolpropane for Biodegradable Synthetic Lubricant Synthesis
  169. Kinetics of transesterification of jatropha curcas-based triglycerides with an alcohol in the presence of alkaline catalyst
  170. Extraction of dynamic features from hand drawn data for the identification of children with handwriting difficulty
  171. Numerical Modeling of Mass Transfer for Solvent-Carbon Dioxide System at Supercritical (Miscible) Conditions
  172. Methanolysis of Jatropha Oil in the Presence of Potassium Hydroxide Catalyst
  173. Development of polymer derived carbon coated monolith for liquid adsorption application by response surface methodology
  174. Extraction of Oil from Jatropha Seeds-Optimization and Kinetics
  175. Coating and Encapsulation of Nanoparticles using Supercritical Antisolvent
  176. Influence of silica gel in production of diacylglycerol via enzymatic glycerolysis of palm olein
  177. Effects of additives on oxidation characteristics of palm oil-based trimethylolpropane ester in hydraulics applications
  178. Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites
  179. Development of Short-Carbon-Fiber-Reinforced Polypropylene Composite for Car Bonnet
  180. Conceptual design of a polymer composite automotive bumper energy absorber
  181. Study on Effect of Hydroxyl Group on Lubrication Properties of Palm Based Trimethylolpropane Esters: Development of Synthesis Method
  182. Effect of Cooling Modes on Solvent Crystallization of Palm Oil Based Dihydroxystearic Acid Using Ethanol
  183. Arsenic toxicity, health hazards and removal techniques from water: an overview
  184. Effect of thermal softening on the textural properties of palm oil fruitlets
  185. Biomass as the Renewable Energy Sources in Malaysia: An Overview
  186. Utilization of composite’s tensile properties for energy absorbing systems
  187. Digital Image Processing of Palm Oil Fruits
  188. Synthesis of Palm Oil Based Trimethylolpropane Esters with Improved Pour Points
  189. Kinetics of transesterification of palm-based methyl esters with trimethylolpropane
  190. Lubrication properties of trimethylolpropane esters based on palm oil and palm kernel oils
  191. A simple capillary column GC method for analysis of palm oil-based polyol esters
  192. An Empirical Model on Extractive Lactic Acid Bioconversion
  193. The potentials of palm oil as a dielectric fluid