Contact

All Stories

  1. Evaluation of the Acoustic Noise Inside the Main Steam Line of a BWR/5 Nuclear Reactor

    Article • Applied Sciences, April 2025, MDPI AG

    Dr Luis Héctor Hernandez-Gomez

  2. Aging evaluation of fuse holders of BWR nuclear power plant

    Article • Results in Engineering, December 2024, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  3. Fluid-Solid Interaction Analysis at the Slip Joint of a Boiling Water Reactor Type 5 Jet Pump

    Article • Nuclear Technology, April 2024, Taylor & Francis

    Dr Luis Héctor Hernandez-Gomez

  4. Methodology for Obtaining Porous Metal Materials (Aluminum 6061) for Biomedical Applications Using Chips with Controlled Size

    Article • January 2024, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  5. Impact Analysis of a Commercial Airplane Over a Nuclear Spent Fuel Dry Storage Cask

    Article • Nuclear Technology, September 2023, Taylor & Francis

    Dr Luis Héctor Hernandez-Gomez

  6. Accumulated Damage of the Main Steam Nozzle of a BWR-5

    Article • January 2023, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  7. Mechanical Design of a Thermo-Mechanical-Cryogenic System to Evaluate Mechanical Properties of Samples of 3D Printing Systems

    Article • January 2023, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  8. Design of a System to Produce Rapid Biomedical Prototypes with Synthetic Materials: State of the Art

    Article • January 2023, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  9. Study for Validation and Implementation of Polymethyl Methacrylate in Neurocranium and Viscerocranium Prostheses

    Article • January 2023, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  10. Design of Dynamic Systems and Electro-Assisted Immersion Connected with Fourth Generation Technology for the Use in Aquatic Therapy in Mexico

    Article • January 2023, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  11. Dynamic and Experimental Testing of a Biomechanical System: Cadaveric Temporomandibular Specimen and a Multiaxial Joint

    Article • January 2023, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  12. Buckling Analysis of an Origami-Inspired Structure with the Finite Element Method

    Article • January 2023, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  13. Multi-objective optimization through artificial intelligence for designing of an Agave angustifolia leaf shredder

    Article • Scientia Agropecuaria, October 2022, Scientia Agropecuaria

    Dr Luis Héctor Hernandez-Gomez

  14. It is methodology to evaluate circunferential cracks of a core schroud

    Article • Journal of Failure Analysis and Prevention, April 2022, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  15. Modeling compressor blades gas turbine in a marine environment to determine of the stress and possible damages

    Article • Revista de Ingenieria Innovativa, December 2021, ECORFAN

    Dr Luis Héctor Hernandez-Gomez

  16. Evaluation of the Environmental Fatigue at a Long Radius Elbow of a Piping System under Transient Thermo Mechanical Stresses

    Article • Defect and Diffusion Forum, November 2021, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez, Dra. Alejandra Armenta Molina

  17. Redesign of a fatigue machine guide plate based on topology optimization

    Article • October 2021, ECORFAN

    Dr Luis Héctor Hernandez-Gomez

  18. It is a methodology for the evaluation of cracks circunferential crcaks.

    Article • Journal of Nuclear Science and Technology, June 2021, Taylor & Francis

    Dr Luis Héctor Hernandez-Gomez, Dra. Alejandra Armenta Molina

  19. Evaluation of a turbulent flow at the inlet of a jet pump

    Article • Science and Technology of Nuclear Installations, March 2021, Hindawi Publishing Corporation

    Dr Luis Héctor Hernandez-Gomez, Dra. Alejandra Armenta Molina

  20. Constant Speed Control of Slider-Crank Mechanisms: A Joint-Task Space Hybrid Control Approach

    Article • IEEE Access, January 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Luis Héctor Hernandez-Gomez, Dra. Alejandra Armenta Molina, DR. JUAN ALEJANDRO FLORES CAMPOS

  21. Sistema de información para la caracterización de imágenes de desgaste en álabes de rotor de una turbina de gas

    Article • Revista de Simulación Computacional, June 2020, ECORFAN

    Dr Luis Héctor Hernandez-Gomez

  22. Fluid-Structural Interaction in a Slip Joint of a Jet Pump Assembly of a BWR-5

    Article • Defect and Diffusion Forum, February 2020, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  23. Analysis of an Aircraft Impact on a Dry Storage Cask of Spent Nuclear Fuel

    Article • January 2020, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  24. Environmental Fatigue Analysis of the Feedwater Piping System of a BWR-5

    Article • January 2020, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez, Dra. Alejandra Armenta Molina

  25. Geometrical Characterization of a Lumbar Spine

    Article • January 2020, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  26. Review of Electromagnetic Compatibility on Digital Systems of Nuclear Power Plants

    Article • January 2020, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez, Dra. Alejandra Armenta Molina

  27. Structural Vibrations in a Building of a Nuclear Power Plant Caused by an Underground Blasting

    Article • January 2020, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez, Dra. Alejandra Armenta Molina

  28. Identification of Stress Fields in a Customized Mandibular Reconstruction Based on a Photoelastic Model

    Article • Journal of Craniofacial Surgery, November 2019, Wolters Kluwer Health

    Dr Luis Héctor Hernandez-Gomez

  29. Chaotic Signatures Exhibited by Plasmonic Effects in Au Nanoparticles with Cells

    Article • Sensors, October 2019, MDPI AG

    Dr Luis Héctor Hernandez-Gomez, Hilario Martines Arano

  30. Caracterización de ejercicios fisioterapéuticos para rehabilitación de hombro mediante videogrametría

    Article • Journal de Ciencia e Ingeniería, August 2019, Corporacion Universitaria Autonoma del Cauca

    Dr Luis Héctor Hernandez-Gomez

  31. Development of an Auxiliary Biomechanical Assistance System for Blindness or Partial Vision

    Article • June 2019, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  32. Manufacturing of a Human’s Hand Prosthesis with Electronic Movable Phalanges Based on a CT Image: An Amputation Case

    Article • June 2019, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  33. Numerical and Experimental Analysis of a Personalized Prosthesis for a Patient with Unilateral Hip Osteoarthritis

    Article • June 2019, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  34. Reconstruction and Finite Element Evaluation of a Calcaneous Implant by Stereolithographic 3D Printing Technique

    Article • June 2019, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  35. Analysis of the Leakage-Flow-Induced Vibration of a Slip Joint in a Jet Pump of a Boiling Water Reactor

    Article • Defect and Diffusion Forum, January 2019, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez, Dra. Alejandra Armenta Molina

  36. Lineal Elastic Fracture Mechanics Analysis Applied for the Evaluation of the Structural Integrity of a Boiling Water Reactor Vessel Considering Neutronic Irradiation

    Article • Defect and Diffusion Forum, January 2019, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez, Yunuén Grijalba, Irving Alvarez Loya

  37. Analysis of the structural girders of a crane for the license renewal of a BWR Nuclear Power Plant

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  38. Numerical analysis of the BWR-5 beltline region containing a crack postulated for an extended period of operation

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Dr Luis Héctor Hernandez-Gomez, Dra. Alejandra Armenta Molina

  39. Thermal-Mechanical Fatigue Analysis of a Main Steam Isolation Valve of a Boiling Water Reactor-5

    Article • July 2018, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  40. Characterization of Scaffold Structures for the Development of Prostheses and Biocompatible Materials

    Article • May 2018, Springer Science + Business Media

    DR. JUAN ALEJANDRO FLORES CAMPOS, Dr Luis Héctor Hernandez-Gomez

  41. Design and Characterization of a Mandibular Prosthesis Prototype by Hemimandibulectomy

    Article • May 2018, Springer Science + Business Media

    DR. JUAN ALEJANDRO FLORES CAMPOS, Dr Luis Héctor Hernandez-Gomez

  42. Design and Methodology to Produce Auxiliary Orthopedic Rehabilitation

    Article • May 2018, Springer Science + Business Media

    DR. JUAN ALEJANDRO FLORES CAMPOS, Dr Luis Héctor Hernandez-Gomez

  43. Development of a Sensitive System to Fixed Prosthesis in the Lumbar and Cervical Orthopedic Area

    Article • May 2018, Springer Science + Business Media

    DR. JUAN ALEJANDRO FLORES CAMPOS, Dr Luis Héctor Hernandez-Gomez

  44. Termomechanical Analysis of 3D Printing Specimens (Acrylonitrile Butadiene Styrene)

    Article • May 2018, Springer Science + Business Media

    DR. JUAN ALEJANDRO FLORES CAMPOS, Dr Luis Héctor Hernandez-Gomez

  45. Analysis of the Wear Damage on Offshore Gas Turbine Blades

    Article • May 2018, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  46. Design and Manufacturing of a Temporomandibular Joint (TMJ) Prosthesis for Mandibular Bone Necrosis Using the Finite Element Method

    Article • May 2018, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  47. Evaluation of the Structural Integrity of a Boiling Water Reactor Skirt Under Stationary and Transient Loading Conditions

    Article • May 2018, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez, Dra. Alejandra Armenta Molina

  48. DISEÑO ERGONÓMICO DE PRÓTESIS DE MIEMBRO INFERIOR PERSONALIZADAS APLICANDO INTELIGENCIA ARTIFICIAL

    Article • DYNA, January 2018, Publicaciones DYNA

    Dr Luis Héctor Hernandez-Gomez

  49. SELECCIÓN DE MATERIAL BIOCOMPATIBLE DE BAJO COSTO PARA MANUFACTURA DE PRÓTESIS MAXILAR PERSONALIZADA

    Article • DYNA, January 2018, Publicaciones DYNA

    Dr Luis Héctor Hernandez-Gomez

  50. Design and Manufacturing of a Dry Electrode for EMG Signals Recording with Microneedles

    Article • July 2017, Springer Science + Business Media

    DR. JUAN ALEJANDRO FLORES CAMPOS, Dr Luis Héctor Hernandez-Gomez

  51. Acoustically-controlled optical Kerr effect signals in bimetallic Au-Pt nanoparticles embedded in a TiO 2 thin film

    Article • Optik, February 2017, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  52. A control system is proposed to heat wáter with solar energy

    Article • Defect and Diffusion Forum, January 2017, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez, DR. JUAN ALEJANDRO FLORES CAMPOS

  53. Thermal Fatigue Analysis in a High Pressure Cooling System (HPCS) Nozzle of a Boling Water Reactor

    Article • Defect and Diffusion Forum, January 2017, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez, DR. JUAN ALEJANDRO FLORES CAMPOS

  54. CARACTERIZACIÓN MECÁNICA DE NUEVO MATERIAL COMPUESTO ENFOCADO HACIA APLICACIONES MAXILOFACIALES

    Article • DYNA, January 2017, Publicaciones DYNA

    Dr Luis Héctor Hernandez-Gomez

  55. Evaluation of ductile failure of the circunferencial welds in a BWR core.

    Article • July 2016, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  56. Design and Development of a Simplified Wear Simulator for Total Knee Replacement (TKR) Based on Pin-Disc Machine

    Article • July 2016, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez, Dr Rafael Rodríguez

  57. Customization and Numerical Simulation of a Cranial Distractor Using Computed Axial Tomography (CAT)

    Article • July 2016, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  58. Numerical Evaluation of the Structural Integrity Exhibited by a TiO2 Thin Solid Film Doped with Au

    Article • July 2016, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  59. Gyroscopic behavior exhibited by the optical Kerr effect in bimetallic Au–Pt nanoparticles suspended in ethanol

    Article • Journal of Nanoparticle Research, July 2016, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  60. Cross-layer designs for energy efficient wireless body area networks: a review

    Article • Revista Facultad de Ingeniería Universidad de Antioquia, June 2016, Universidad de Antioquia

    Dr Luis Héctor Hernandez-Gomez

  61. The physical and mechanical properties of the agave fibers were determined

    Article • Botanical Sciences, December 2015, Botanical Scicences, Sociedad Botanica de Mexico, AC

    Dr Luis Héctor Hernandez-Gomez

  62. Bidirectional optical Kerr transmittance in a bilayer nanocomposite with Au nanoparticles and carbon nanotubes

    Article • Physica Scripta, July 2015, Institute of Physics Publishing

    Dr Luis Héctor Hernandez-Gomez

  63. Surface treatment

    Article • Defect and Diffusion Forum, July 2015, Trans Tech Publications

    Professor NOE LOPEZ PERUSQUIA, Marck M. A. DR, Dr Luis Héctor Hernandez-Gomez, Daniel Sanchez Huerta, Dr. Daniel Huerta, Guillermo Urriolagoitia-Sosa, Dr NOE LOPEZ PERRUSQUIA

  64. Simulation of the Acoustic Loads Generated in the Intersection of a Main Steam Line and its Safety Relief Valve Branch of a BWR Plant under Extended Power Uprate Condition

    Article • Defect and Diffusion Forum, April 2015, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez, M.Sc. Arturo A Ocampo, Guillermo Urriolagoitia-Sosa

  65. Determination of the mechanical properties of lumbar porcine vertebrae with 2D digital image correlation

    Article • Journal of Applied Biomaterials & Functional Materials, January 2015, Wichtig

    Dr Luis Héctor Hernandez-Gomez

  66. Numerical and Biomechanical Testings in Cadaveric Auditory Ossicles Using Computer Axial Tomography

    Article • January 2015, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  67. Design and Manufacturing of Prosthesis of a Jaw for a Young Patient with Articular Ankylosis

    Article • January 2015, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  68. Biomechanical Design of a Vertebral Distractor for Fractured Bodies Useful in Kyphoplasty

    Article • January 2015, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  69. An Optimization of the Manufacturing Process of Corporeal Screws Made of Synthetic Bone

    Article • January 2015, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  70. Design and Development of an Experimental Claw-Grip, Forefinger Simulator. Part I: Kinematics

    Article • January 2015, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  71. MODELACIÓN CON REDES DE PETRI DE LA MEJORA CONTINUA EN SISTEMAS DE PRODUCCIÓN

    Article • DYNA, January 2015, Publicaciones DYNA

    Dr Luis Héctor Hernandez-Gomez

  72. Respiration rate and mechanical properties of peach fruit during storage at three maturity stages

    Article • Journal of Food Engineering, December 2014, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  73. Study of a Novel Electronics Circuit for Detecting Faults in the IGBT

    Article • IEEE Latin America Transactions, May 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Luis Héctor Hernandez-Gomez

  74. Numerical Study in Biomodels of Maxillofacial Prosthesis (Cancer and Osteonecrosis Cases)

    Article • January 2014, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  75. Design and Manufacture of a Prototype of a Testing Rig for the Evaluation of the Biomechanical Behavior of Vertebrae

    Article • January 2014, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  76. Biomechanical Assembled Prosthesis of a Temporo Mandibular Joint Disorder Using Biocompatible Materials

    Article • January 2014, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  77. Strain Measurements Exhibited by a Steel Prosthesis Protected with Au Nanoparticles

    Article • January 2014, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  78. Application of Petri networks to production processes

    Article • DYNA MANAGEMENT, January 2014, Publicaciones DYNA

    Dr Luis Héctor Hernandez-Gomez

  79. Evaluation of the Structural Integrity of the Jet Pumps of a Boiling Water Reactor under Hydrodynamic Loading

    Article • Defect and Diffusion Forum, January 2014, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  80. Three dimensional finite element model of soil compaction caused by agricultural tire traffic

    Article • Computers and Electronics in Agriculture, November 2013, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  81. Biomechanical and Control Design of a Prototype for Muscular Re-Training of a Forearm and a Wrist

    Article • January 2013, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  82. Optimization of the Design of a Four Bar Mechanism for a Lower Limb Prosthesis Using the Taboo Search Algorithm

    Article • January 2013, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  83. Mechanical Evaluation of Microimplants for Dental Surgery

    Article • January 2013, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  84. Rehabilitation of an individual with a fracture in his Orbicular Cranial Cavity

    Article • January 2013, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  85. Numerical Simulation on the Residual Stress Induction due to Welding Process and Assessment by the Application of the Crack Compliance Method

    Article • Advances in Mechanical Engineering, January 2013, SAGE Publications

    Dr Luis Héctor Hernandez-Gomez

  86. Using Quality Function Deployment Methodology to Translate Qualitative to Quantitative Requirements in the Design a of a Knee Re-trainer

    Article • December 2012, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  87. Research Advances and Perspective of Multi-Articulated and Robotic Hands

    Article • December 2012, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  88. High resolution non-destructive evaluation of defects using artificial neural networks and wavelets

    Article • NDT & E International, November 2012, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  89. Optical absorptive response of platinum doped TiO2 transparent thin films with Au nanoparticles

    Article • Materials Science in Semiconductor Processing, August 2012, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  90. Mechanical design and manufacture by powder technology of a new mandrel tool for the fabrication of assault rifle barrels

    Article • Powder Technology, July 2012, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  91. Assessment of the Structural Integrity of C3–C5 Cervical Porcine Vertebrae Model Based on 2D Classic CAD, 3D Scanner and 3D Computed Tomography

    Article • January 2012, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez

  92. Crack-compliance method for assessing residual stress due to loading/unloading history: Numerical and experimental analysis

    Article • Theoretical and Applied Fracture Mechanics, December 2011, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  93. Evaluation of the Integrity of a Human Molar under Compressive Loading Using 3-D Axial Tomography

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  94. Residual Stress Interaction against Mechanical Loading during the Manufacturing Process of an Assault Rifle Component

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  95. Comparative Experimental Analysis of Different Bending Methods for the Mechanical Characterization of Materials with Previous Loading History (Stress-Strain Curves)

    Article • Advanced Materials Research, August 2011, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  96. Numerical and Experimental Analysis in the Manipulation of the Mechanical Properties for Enhancing the Mechanical Resistance of a Material

    Article • Journal of Applied Research and Technology, August 2011, Universidad Nacional Autonoma de Mexico

    Dr Luis Héctor Hernandez-Gomez

  97. Prediction of crack growth direction by Strain Energy Sih's Theory on specimens SEN under tension-compression biaxial loading employing Genetic Algorithms

    Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

    Dr Luis Héctor Hernandez-Gomez

  98. Interferometric laser detection of nanomechanical perturbations in biological media under ablation conditions

    Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

    Dr Luis Héctor Hernandez-Gomez

  99. Locating and classifying defects using an hybrid data base

    Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

    Dr Luis Héctor Hernandez-Gomez

  100. Biomechanical Characterization of a Cervical Corporectomy Using Porcine Specimens, Following an Experimental Approach

    Article • Key Engineering Materials, April 2011, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  101. Síntesis Genética de Mecanismos para Aplicaciones en Prótesis de Miembro Inferior

    Article • Revista Iberoamericana de Automática e Informática Industrial RIAI, April 2011, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  102. Síntesis Genética de Mecanismos para Aplicaciones en Prótesis de Miembro Inferior

    Article • Revista Iberoamericana de Automática e Informática Industrial RIAI, April 2011, Universitat Politecnica de Valencia

    Dr Luis Héctor Hernandez-Gomez

  103. Performance Optimization of GA Based Planar Mechanism Synthesis

    Article • September 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Luis Héctor Hernandez-Gomez

  104. Biomechanics and Numerical Evaluation of Cervical Porcine Models Considering Compressive Loads Using 2-D Classic Computer Tomography CT, 3-D Scanner and 3 -D Computed Tomography

    Article • Applied Mechanics and Materials, June 2010, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  105. Evaluation of the Impact of Residual Stresses in Crack Initiation with the Application of the Crack Compliance Method Part I, Numerical Analysis

    Article • Applied Mechanics and Materials, June 2010, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  106. Evaluation of the Impact of Residual Stresses in Crack Initiation with the Application of the Crack Compliance Method Part II, Experimental Analysis

    Article • Applied Mechanics and Materials, June 2010, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  107. Residual Stresses in Beams (With and Without Prior History) Numerically Assessed by the Crack Compliance Method

    Article • Strain, February 2010, Wiley

    Dr Luis Héctor Hernandez-Gomez

  108. Electromechanical and Systems Engineering

    Article • August 2009, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  109. Numerical and experimental evaluation of the residual stress relaxation and the influence zone due to application of the crack compliance method

    Article • Journal of Physics Conference Series, August 2009, Institute of Physics Publishing

    Dr Luis Héctor Hernandez-Gomez

  110. Biomechanical evaluation of a corporectomy in porcine lumbar specimens using flexible polymer belts

    Article • Journal of Physics Conference Series, August 2009, Institute of Physics Publishing

    Dr Luis Héctor Hernandez-Gomez

  111. Numerical and experimental analysis of the directional stability on crack propagation under biaxial stresses

    Article • Journal of Physics Conference Series, August 2009, Institute of Physics Publishing

    Dr Luis Héctor Hernandez-Gomez

  112. Tensile Strength of Fibers Extracted from the Leaves of the angustifolia Haw Agave in Function of their Length

    Article • Applied Mechanics and Materials, August 2009, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  113. Synthesis Optimization of Planar Mechanisms

    Article • Applied Mechanics and Materials, August 2009, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  114. Speed Control of a DC Brush Motor with Conventional PID and Fuzzy PI Controllers

    Article • September 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Luis Héctor Hernandez-Gomez

  115. Locating and Classifying Defects with Artificial Neural Networks

    Article • Applied Mechanics and Materials, July 2008, CrossRef Test Account

    Dr Luis Héctor Hernandez-Gomez

  116. Modelling of a Cervical Plate and Human Cervical Section C3 – C5 under Compression Loading Conditions Using the Finite Element Method

    Article • Applied Mechanics and Materials, July 2008, CrossRef Test Account

    Dr Luis Héctor Hernandez-Gomez

  117. A Neural Network Approach for Locating Multiple Defects

    Article • Applied Mechanics and Materials, July 2008, CrossRef Test Account

    Dr Luis Héctor Hernandez-Gomez

  118. Cumulative Damage Evaluation under Fatigue Loading

    Article • Applied Mechanics and Materials, July 2008, CrossRef Test Account

    Dr Luis Héctor Hernandez-Gomez

  119. Numerical Evaluation of the Crack Compliance Method (CCM) in Beams with and without Prior History

    Article • Applied Mechanics and Materials, July 2008, CrossRef Test Account

    Dr Luis Héctor Hernandez-Gomez

  120. Locating and Classifying Defects with Artificial Neural Networks

    Article • Applied Mechanics and Materials, July 2008, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  121. Cumulative Damage Evaluation under Fatigue Loading

    Article • Applied Mechanics and Materials, July 2008, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  122. Modelling of a Cervical Plate and Human Cervical Section C3 – C5 under Compression Loading Conditions Using the Finite Element Method

    Article • Applied Mechanics and Materials, January 2008, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  123. A Neural Network Approach for Locating Multiple Defects

    Article • Applied Mechanics and Materials, January 2008, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  124. Numerical Evaluation of the Crack Compliance Method (CCM) in Beams with and without Prior History

    Article • Applied Mechanics and Materials, January 2008, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  125. Mechanical Behavior of a Calcium Phosphate Ceramic Bone Graft Used in the Rehabilitation of a C4 Human Vertebra

    Article • Applied Mechanics and Materials, August 2007, CrossRef Test Account

    Dr Luis Héctor Hernandez-Gomez

  126. Mechanical Behavior of a Calcium Phosphate Ceramic Bone Graft Used in the Rehabilitation of a C4 Human Vertebra

    Article • Applied Mechanics and Materials, January 2007, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  127. Locating Defects Using Dynamic Strain Analysis and Artificial Neural Networks

    Article • Applied Mechanics and Materials, August 2006, CrossRef Test Account

    Dr Luis Héctor Hernandez-Gomez

  128. Corrigendum to “Dry and wet abrasive resistance of Inconel 600 and stellite” [Wear 258 (2005) 70–76]

    Article • Wear, January 2006, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  129. Photoacoustic Spectroscopy Applied to the Study of Bone Consolidation in Fractures

    Article • March 2005, CrossRef Test Account

    Dr Luis Héctor Hernandez-Gomez

  130. Dry and wet abrasive resistance of Inconel 600 and stellite

    Article • Wear, January 2005, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  131. Photoacoustic Spectroscopy Applied to the Study of Bone Consolidation in Fractures

    Article • Materials Science Forum, January 2005, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  132. Locating Defects Using Dynamic Strain Analysis and Artificial Neural Networks

    Article • Applied Mechanics and Materials, January 2005, Trans Tech Publications

    Dr Luis Héctor Hernandez-Gomez

  133. Evaluation of crack initiation angle under mixed mode loading at diverse strain rates

    Article • Theoretical and Applied Fracture Mechanics, September 2004, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  134. Self-affine nature of the stress-strain behavior of an elastic fractal network

    Article • Physics Letters A, May 2002, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  135. Probabilistic mechanics of self-affine cracks in paper sheets

    Article • Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences, July 1999, Royal Society Publishing

    Dr Luis Héctor Hernandez-Gomez

  136. Experimental analysis of crack propagation stability in single edge notch specimens

    Article • Theoretical and Applied Fracture Mechanics, October 1997, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  137. Evaluation of crack propagation stability with the williams stress function—II. Numerical analysis

    Article • Computers & Structures, June 1997, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  138. Evaluation of crack propagation stability with the williams stress function—I. Stress field analysis

    Article • Computers & Structures, November 1996, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  139. The crack propagation velocity in PMMA plate was evaluted when it was loaded with an explosion wave,

    Article • Theoretical and Applied Fracture Mechanics, June 1993, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  140. Assessment of data for dynamic crack initiation under shock pressure loading: Part II—Analysis

    Article • Theoretical and Applied Fracture Mechanics, June 1993, Elsevier

    Dr Luis Héctor Hernandez-Gomez

  141. Evaluation of crack propagation velocity under dynamic loading

    Article • International Journal of Fracture, May 1993, Springer Science + Business Media

    Dr Luis Héctor Hernandez-Gomez