All Stories

  1. Slenderness-dependent imperfection sensitivity and defect tolerance of steel-CFRP hybrid pressure cylinders: a design by analysis approach

    Article • Ships and Offshore Structures, October 2026, Taylor & Francis

    Jamaluddin Mahmud

  2. Predictive Modelling of Stress and Tensile Properties of Oral Dispersible Film Using Artificial Neural Network

    Article • International Journal of Integrated Engineering, June 2026, Penerbit UTHM

    Jamaluddin Mahmud

  3. Prediction of Ascorbic Acid Dissolution by UV-Vis Spectroscopy for Oral Dispersible Film (ODF) Using Artificial Neural Network (ANN)

    Article • Materials Science Forum, May 2026, Trans Tech Publications

    Jamaluddin Mahmud

  4. Buckling failures in curved shell structures: a comprehensive review of theory, design, and applications

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, January 2026, Springer Science + Business Media

    Jamaluddin Mahmud

  5. Buckling Load Prediction of Hybrid Composite Laminates Using Artificial Neural Network

    Article • January 2026, Springer Science + Business Media

    Jamaluddin Mahmud

  6. A Comprehensive Review of Curved Shell Structures Against Buckling Failures

    Article • March 2025, MDPI AG

    Jamaluddin Mahmud

  7. Numerical Simulation and Analysis of the Post-buckling Response of the Stiffened Panels

    Article • January 2025, Springer Science + Business Media

    Jamaluddin Mahmud

  8. Structural Response Prediction of Carbon-Fiber Reinforced Polymer Composite Laminate on Low-Velocity Impact Event

    Article • January 2025, Springer Science + Business Media

    Jamaluddin Mahmud

  9. The Effects of Fibre Angle Orientation on the Failure Behaviour and Natural Frequencies of Kevlar Epoxy and Glass Epoxy Composite Laminates Under Uniaxial Tension

    Article • January 2025, Springer Science + Business Media

    Jamaluddin Mahmud

  10. The Effects of Fibre Angle Orientation to the Failure Behaviour and Natural Frequencies of Graphite/Epoxy Laminates Under Uniaxial Tension

    Article • January 2025, Springer Science + Business Media

    Jamaluddin Mahmud

  11. Buckling and Postbuckling Analysis of Stiffened Cylindrical Shells Subjected to Axial Compression and External Pressure

    Article • January 2024, Springer Science + Business Media

    Jamaluddin Mahmud

  12. Tensile Properties and Potential Applications of Leucaena-Silicone Biocomposite

    Article • January 2024, Springer Science + Business Media

    Jamaluddin Mahmud

  13. Natural Frequencies Optimisation of Hybrid Composite Laminates using Response Surface Method

    Article • Journal of Advanced Research in Applied Sciences and Engineering Technology, July 2023, Akademia Baru Publishing

    Jamaluddin Mahmud

  14. The Effect of Reinforcing Moringa Oleifera Bark Fibre on the Tensile and Deformation Behaviour of Epoxy and Silicone Rubber Composites

    Article • Pertanika Journal of Science and Technology, May 2023, Universiti Putra Malaysia

    Jamaluddin Mahmud

  15. Buckling of an imperfect spherical shell subjected to external pressure

    Article • Ocean Engineering, May 2023, Elsevier

    Jamaluddin Mahmud

  16. Comparative evaluation of design codes for buckling assessment of a steel spherical shell

    Article • Latin American Journal of Solids and Structures, January 2023, FapUNIFESP (SciELO)

    Jamaluddin Mahmud

  17. Prediction of the Welding Process Parameters and the Weld Bead Geometry for Robotic Welding Applications with Adaptive Neuro-Fuzzy Models

    Article • January 2023, Springer Science + Business Media

    Jamaluddin Mahmud

  18. Analysis of Hard Point Mechanical Behaviour Due to Variations of Potting Agent Volume on a Composite Sandwich Panel

    Article • Materials Science, December 2022, Publishing House Technologija

    Jamaluddin Mahmud

  19. A Prediction Model for Natural Frequencies on Kevlar/Glass Hybrid Laminated Composite using Artificial Neural Networks (ANN)

    Article • International Journal of Integrated Engineering, September 2022, Penerbit UTHM

    Jamaluddin Mahmud

  20. Compressive Failure Behaviour of Kevlar Epoxy and Glass Epoxy Composite Laminates Due to the Effect of Cutout Shape and Size with Variation in Fiber Orientations

    Article • International Journal of Integrated Engineering, September 2022, Penerbit UTHM

    Jamaluddin Mahmud

  21. Quantifying and Predicting Tensile Properties of Curcuma longa-silicone Biocomposite

    Article • Materials Science, August 2022, Publishing House Technologija

    Jamaluddin Mahmud

  22. Walking Gait Analysis: Kinovea versus Motion Capture System

    Article • July 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud

  23. Tensile properties of silicone biocomposite reinforced with waste material (Hevea brasiliensis sawdust): Experimental and numerical approach

    Article • BioResources, June 2022, BioResources

    Jamaluddin Mahmud

  24. Morphological, Physical, and Mechanical Properties of Sugar-Palm (Arenga pinnata (Wurmb) Merr.)-Reinforced Silicone Rubber Biocomposites

    Article • Materials, June 2022, MDPI AG

    Dr. R.A. Ilyas, Jamaluddin Mahmud, Assoc. Prof. Dr. Mohammed N. Abdulrazaq

  25. Hyperelastic Properties of Bamboo Cellulosic Fibre–Reinforced Silicone Rubber Biocomposites via Compression Test

    Article • International Journal of Molecular Sciences, June 2022, MDPI AG

    Dr. R.A. Ilyas, Jamaluddin Mahmud, Assoc. Prof. Dr. Mohammed N. Abdulrazaq

  26. Physical and mechanical properties of bamboo-silicone biocomposites (BaSiCs)

    Article • BioResources, June 2022, BioResources

    Jamaluddin Mahmud

  27. Tensile properties and potential applications of Moringa Oleifera bark-silicone biocomposite

    Article • January 2022, American Institute of Physics

    Mochamad Arif Irfai, Jamaluddin Mahmud

  28. A feasibility study on measuring angular velocity using a novel essential tremor suppression device

    Article • January 2022, American Institute of Physics

    Jamaluddin Mahmud

  29. Compressive failure behaviour of composite laminates due to the effects of cutout sizes and variation in fibre orientations

    Article • January 2022, American Institute of Physics

    Indra Herlamba Siregar, Jamaluddin Mahmud

  30. The effects of diamond cutout size and fibre orientation on the failure behaviour of graphite epoxy and glass epoxy composite laminates

    Article • January 2022, American Institute of Physics

    Jamaluddin Mahmud

  31. Compressive Failure Behaviour of Kevlar Epoxy and Glass Epoxy Composite Laminates Due to the Effects of Cutout Size and Variation in Fibre Orientations

    Article • January 2022, Springer Science + Business Media

    Jamaluddin Mahmud

  32. Compressive failure behaviour of glass epoxy and graphite epoxy composite laminates due to the effects of different cut-out sizes and variations in fibre orientation

    Article • Materials Today Proceedings, January 2022, Elsevier

    Jamaluddin Mahmud

  33. The effects of cutout size and fibre orientation to the failure behaviour of glass epoxy and boron epoxy composite laminates

    Article • Materials Today Proceedings, January 2022, Elsevier

    Jamaluddin Mahmud

  34. Mechanical properties of a healing patch made of natural biopolymer.

    Article • January 2021, American Institute of Physics

    Nur Nabila Mohd Nazali, Jamaluddin Mahmud

  35. The reconstruction of three-dimensional (3D) model of the right parietal-temporal implant

    Article • January 2021, American Institute of Physics

    Wan Nur Fatini Syahirah W. Dagang, Jamaluddin Mahmud

  36. Deformation and failure behavior of hybrid composite laminates made of Glass Epoxy and woven Kevlar Epoxy

    Article • Materials Today Proceedings, January 2021, Elsevier

    Jamaluddin Mahmud

  37. Compressive and viscoelastic behavior of Arenga Pinnata-Silicone Biocomposite

    Article • Materials Today Proceedings, January 2021, Elsevier

    Jamaluddin Mahmud

  38. Failure analysis of boron/glass hybrid laminates under biaxial tension

    Article • Materials Today Proceedings, January 2021, Elsevier

    Jamaluddin Mahmud

  39. Experimental-Numerical Analysis of Woven Laminates under Tension

    Article • Materials Science, August 2020, Publishing House Technologija

    Jamaluddin Mahmud

  40. Leucaena leucocephala: A fast-growing tree for the Malaysian particleboard industry

    Article • BioResources, August 2020, BioResources

    Jamaluddin Mahmud

  41. Effectiveness and Comfort Assessment of the Novel Intra-oral Bisecting Angle Bisector© and Paralleling RINN® Digital Imaging Receptor Holders in Low Palatal Height Patients

    Article • Archives of Orofacial Sciences, July 2020, Penerbit Universiti Sains Malaysia

    Jamaluddin Mahmud

  42. Characterisation of Hybrid Carbon Glass Fiber Reinforced Polymer (C/GFRP) of Balanced Cross Ply and Quasi Isotropic under Tensile and Flexural Loading

    Article • International Journal of Automotive and Mechanical Engineering, April 2020, Universiti Malaysia Pahang Publisher

    Jamaluddin Mahmud

  43. Numerical-experimental approach to assess the deflection behaviour of carbon fibre fishing rod

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Jamaluddin Mahmud

  44. Improved tensile properties of basalt fibre reinforced polymer composites using silica nanoparticles

    Article • Materialwissenschaft und Werkstofftechnik, August 2019, Wiley

    Jamaluddin Mahmud

  45. Swelling behaviour of Arenga pinnata–silicone biocomposite

    Article • Materials Letters, May 2019, Elsevier

    Jamaluddin Mahmud

  46. Dynamic instability response of smart composite material

    Article • Materialwissenschaft und Werkstofftechnik, March 2019, Wiley

    Jamaluddin Mahmud

  47. Parametric Study on Dynamic Instability of Fully Anisotropic Composite Plates

    Article • International Journal of Engineering & Technology, December 2018, Science Publishing Corporation

    Jamaluddin Mahmud

  48. Aerodynamic performance of X-plane with two different types of inboard stores

    Article • International Journal of Engineering & Technology, October 2018, Science Publishing Corporation

    Jamaluddin Mahmud

  49. The Error-Correcting Coding in Information Storage Modules with Increased Radiation Resistance

    Article • International Journal of Engineering & Technology, September 2018, Science Publishing Corporation

    Jamaluddin Mahmud

  50. Hydraulic System with the Automatic Regulator of Liquid Flow and Investigation of its Operation

    Article • International Journal of Engineering & Technology, September 2018, Science Publishing Corporation

    Jamaluddin Mahmud

  51. Engenieering Technology in Plastic Biodegradation by Large Bee Moth Larvae Depends on the Type of Polyethylene

    Article • International Journal of Engineering & Technology, September 2018, Science Publishing Corporation

    Jamaluddin Mahmud

  52. Angle of Arrival Estimation in Smart Antenna for Wireless Communication

    Article • International Journal of Engineering & Technology, September 2018, Science Publishing Corporation

    Jamaluddin Mahmud

  53. Finite Element Method Analysis of Normal and Corrosion Buckling with ANSYS17 Program for Stainless Steel 304 Alloy

    Article • International Journal of Engineering & Technology, September 2018, Science Publishing Corporation

    Jamaluddin Mahmud

  54. Energy efficient Key Distribution for Wireless Sensor Networks

    Article • International Journal of Engineering & Technology, September 2018, Science Publishing Corporation

    Jamaluddin Mahmud

  55. Arenga Pinnata–Silicone Biocomposite Properties

    Article • Materials Science, August 2018, Publishing House Technologija

    Jamaluddin Mahmud

  56. Failure Analysis of Graphite Epoxy Composite Plate Under Transverse Sinusoidal Load

    Article • International Journal of Engineering & Technology, July 2018, Science Publishing Corporation

    Jamaluddin Mahmud

  57. The Effect of Various Fiber Orientations and Boundary Conditions on Natural Frequencies of Laminated Composite Beam

    Article • International Journal of Engineering & Technology, July 2018, Science Publishing Corporation

    Jamaluddin Mahmud

  58. Reducing protector cover warpage through topology optimisation

    Article • The International Journal of Advanced Manufacturing Technology, July 2018, Springer Science + Business Media

    Jamaluddin Mahmud

  59. Mechanical properties of functionalised CNT filled kenaf reinforced epoxy composites

    Article • Materials Research Express, April 2018, Institute of Physics Publishing

    Jamaluddin Mahmud

  60. Biomechanical analysis using Kinovea for sports application

    Article • IOP Conference Series Materials Science and Engineering, April 2018, Institute of Physics Publishing

    Jamaluddin Mahmud

  61. Tensile behaviours of single-walled carbon nanotubes

    Article • Materialwissenschaft und Werkstofftechnik, April 2018, Wiley

    Jamaluddin Mahmud

  62. Elasticity deformation and failure modes behavior of hybrid composite CFRP/GFRP under tensile loading

    Article • International Journal of ADVANCED AND APPLIED SCIENCES, March 2018, International Journal of Advanced and Applied Sciences

    Jamaluddin Mahmud

  63. Kenaf Silicone Biocomposites: Synthesis and its Hyperelastic Behaviour

    Article • Materials Science Forum, July 2017, Trans Tech Publications

    Nadiah Azmi, Jamaluddin Mahmud

  64. Material Characterization of Hybrid Composite: Experimental Using Strain Gauge/DIC with Finite Element Modelling Macro/Micro Scale

    Article • Key Engineering Materials, June 2017, Trans Tech Publications

    Jamaluddin Mahmud

  65. Sealing capability and hyperelastic behaviour of silicone biocomposites via compression test

    Article • Materialwissenschaft und Werkstofftechnik, April 2017, Wiley

    Jamaluddin Mahmud

  66. Shear deformation behavior of hybrid composite (GFRP/CFRP)

    Article • Materialwissenschaft und Werkstofftechnik, April 2017, Wiley

    Jamaluddin Mahmud

  67. Failure Analysis of Glass/Epoxy and Graphite/Epoxy Laminates due to the Effect of Variation in Lamination Scheme and Angle of Fibre Orientation

    Article • Materials Science Forum, March 2017, Trans Tech Publications

    Jamaluddin Mahmud

  68. Parametric Investigation of Mooney-Rivlin Material Constants on Silicone Biocomposite

    Article • Materials Science Forum, January 2017, Trans Tech Publications

    Ms Siti Humairah Kamarul Bahrain, Jamaluddin Mahmud

  69. An intelligent active force control algorithm to control an upper extremity exoskeleton for motor recovery

    Article • IOP Conference Series Materials Science and Engineering, February 2016, Institute of Physics Publishing

    Jamaluddin Mahmud

  70. THE EFFECT OF LAMINATION SCHEME AND ANGLE VARIATIONS TO THE DISPLACEMENTS AND FAILURE BEHAVIOUR OF COMPOSITE LAMINATE

    Article • Jurnal Teknologi (Sciences & Engineering), October 2015, Penerbit UTM Press

    Jamaluddin Mahmud

  71. DEVELOPMENT OF A MOTION CAPTURE SYSTEM USING KINECT

    Article • Jurnal Teknologi (Sciences & Engineering), October 2015, Penerbit UTM Press

    Jamaluddin Mahmud

  72. BIOMECHANICAL BEHAVIOUR OF BOVINE SKIN: AN EXPERIMENT-THEORY INTEGRATION AND FINITE ELEMENT SIMULATION

    Article • Jurnal Teknologi (Sciences & Engineering), October 2015, Penerbit UTM Press

    Jamaluddin Mahmud

  73. Patient-Driven Hand Exoskeleton Based Robotic with Active Control System for Early Post Stroke Rehabilitation

    Article • Applied Mechanics and Materials, October 2015, Trans Tech Publications

    Jamaluddin Mahmud

  74. EFFECT OF NANOCLAY CONTENT ON FLEXURAL PROPERTIES OF GLASS FIBER REINFORCED POLYMER (GFRP) COMPOSITES

    Article • Jurnal Teknologi (Sciences & Engineering), September 2015, Penerbit UTM Press

    Aidah JUmahat, Jamaluddin Mahmud

  75. FLEXURAL AND TENSILE PROPERTIES OF KENAF/GLASS FIBRES HYBRID COMPOSITES FILLED WITH CARBON NANOTUBES

    Article • Jurnal Teknologi (Sciences & Engineering), September 2015, Penerbit UTM Press

    Aidah JUmahat, Jamaluddin Mahmud

  76. MODEL-BASED SYSTEMS ENGINEERING OF A HAND REHABILITATION DEVICE

    Article • Jurnal Teknologi (Sciences & Engineering), September 2015, Penerbit UTM Press

    Jamaluddin Mahmud

  77. Modelling and Computation of Silicone Rubber Deformation Adapting Neo-Hookean Constitutive Equation

    Article • April 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud

  78. Model Based Design of Finger Exoskeleton for Post Stroke Rehabilitation Using a Slotted Link Cam with Lead Screw Mechanism

    Article • January 2015, Springer Science + Business Media

    Jamaluddin Mahmud

  79. Experimental Comparison of Hyperelastic Model on Skin

    Article • January 2015, Atlantis Press

    Jamaluddin Mahmud

  80. Design and fabrication of compression test rig for fibre-reinforced polymer composites

    Article • Materials Research Innovations, December 2014, Taylor & Francis

    Aidah JUmahat, Jamaluddin Mahmud

  81. Biomechanical testing of bovine skin using various sample specifications

    Article • Materials Research Innovations, December 2014, Taylor & Francis

    Jamaluddin Mahmud

  82. Multi geometrical image processing based on active vision agent

    Article • November 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud, J SAEDON

  83. A Framework for Experimental-Numerical Analysis of Woven Laminates Failure

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Jamaluddin Mahmud

  84. Kinematics and Efficacy Analysis of the Seni Silat Cekak Malaysia (Kaedah A)

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Jamaluddin Mahmud

  85. A Brief Review and Framework towards Synthesising Silicone-Hydrogel Materials that Mimic Skin Deformation Behaviour

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Jamaluddin Mahmud

  86. Failure Analysis of Composite Laminates under Biaxial Tension: A Review and Framework

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Jamaluddin Mahmud

  87. Measurement System Analysis of VS Lite

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Jamaluddin Mahmud

  88. Preliminary Numerical Analysis of a Platform Structure

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Jamaluddin Mahmud

  89. System integration and control of Dynamic Ankle Foot Orthosis for lower limb rehabilitation

    Article • May 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud

  90. Testing standards assessment for silicone rubber

    Article • May 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud

  91. Force assisted hand and finger device for rehabilitation

    Article • May 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud

  92. A Parametric Investigation on the Neo-Hookean Material Constant

    Article • Advanced Materials Research, April 2014, Trans Tech Publications

    Jamaluddin Mahmud

  93. A Review on Synthetic Skin: Materials Investigation, Experimentation and Simulation

    Article • Advanced Materials Research, April 2014, Trans Tech Publications

    Jamaluddin Mahmud

  94. System Integration and Control of Finger Orthosis for Post Stroke Rehabilitation

    Article • Procedia Technology, January 2014, Elsevier

    Jamaluddin Mahmud

  95. Quantifying Skin Properties Using a Novel Integration Experiment-Finite Element Simulation and Skin Pre-Stretch Model

    Article • Advanced Science Letters, November 2013, American Scientific Publishers

    Jamaluddin Mahmud

  96. An Innovative Improvement on Standard Testing Procedure for Biomaterials under Uniaxial Tension

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, Jamaluddin Mahmud

  97. Parametric Study of Low Velocity Impact Using Finite Element Analysis

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    Jamaluddin Mahmud

  98. Sensitivity Study of Surface Curvature in Characterisation of Cartilage Mechanical Properties

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    Jamaluddin Mahmud

  99. Fibre Misalignment Measurement of Nanomodified-Unidirectional Carbon Fibre Laminates

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    Jamaluddin Mahmud, Aidah JUmahat

  100. Slippery Motion between the Limbs of a Double Tendon Graft

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    Jamaluddin Mahmud, Dr Mahmoud Chizari

  101. The Development of Finger Rehabilitation Device for Stroke Patients

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    Jamaluddin Mahmud

  102. Characterisation of soft tissues biomechanical properties using 3D Numerical Approach

    Article • April 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Muhammad Hussain H Ismail, Jamaluddin Mahmud

  103. Detecting microscopic defects in aged thermoplastic using thermoelastic technique

    Article • April 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud

  104. Effects of Interference Screw Lengths on the Primary Stability of Anterior Cruciate Ligament Reconstruction

    Article • Advanced Science Letters, March 2013, American Scientific Publishers

    Jamaluddin Mahmud

  105. Dynamic Analysis of Frontal Human Skull Using Finite Element Simulation

    Article • Advanced Materials Research, January 2013, Trans Tech Publications

    Jamaluddin Mahmud

  106. Experimental and Numerical Investigation of SUP12 Steel Coil Spring

    Article • Procedia Engineering, January 2013, Elsevier

    Aidah JUmahat, Jamaluddin Mahmud

  107. The Effects of Surface Curvature on Cartilage Behaviour in Indentation Test: A Finite Element Study

    Article • Procedia Engineering, January 2013, Elsevier

    Aidah JUmahat, Jamaluddin Mahmud

  108. Finite Element Analysis of Telecommunication Mini Mast Structure

    Article • Procedia Engineering, January 2013, Elsevier

    Aidah JUmahat, Jamaluddin Mahmud

  109. Evaluating the Hip Range of Motion Using the Goniometer and Video Tracking Methods

    Article • Procedia Engineering, January 2013, Elsevier

    Jamaluddin Mahmud, Dr Mahmoud Chizari

  110. Accuracy of Measuring Methods on the Femoral Head

    Article • Procedia Engineering, January 2013, Elsevier

    Jamaluddin Mahmud, Dr Mahmoud Chizari

  111. Parametric study on failure analysis of composite laminate under uniaxial tensile loading

    Article • December 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud

  112. RELATIVE MOTION OF TENDON LIMBS IN A LOOP TENDON GRAFT

    Article • Biomedical Engineering Applications Basis and Communications, October 2012, National Taiwan University

    Jamaluddin Mahmud, Dr Mahmoud Chizari

  113. Determining hyperelastic parameters of human skin using 2D finite element modelling and simulation

    Article • June 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud, Dr Mahmoud Chizari

  114. Evaluation of failure criteria for composite plates under tension

    Article • June 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud

  115. An Innovative Tool to Measure Human Skin Strain Distribution in Vivo using Motion Capture and Delaunay Mesh

    Article • Journal of Mechanics, May 2012, Cambridge University Press

    Jamaluddin Mahmud

  116. Finite Element Implementations to Predict the Failure of Composite Laminates Under Uniaxial Tension

    Article • Advanced Materials Research, April 2012, Trans Tech Publications

    Jamaluddin Mahmud

  117. Effects of Screw Materials in Anterior Cruciate Ligament Reconstruction using Finite Element Analysis

    Article • Procedia Engineering, January 2012, Elsevier

    Jamaluddin Mahmud

  118. Stress Analysis of a Low Loader Chassis

    Article • Procedia Engineering, January 2012, Elsevier

    Jamaluddin Mahmud

  119. Compressive Properties of Nanoclay/Epoxy Nanocomposites

    Article • Procedia Engineering, January 2012, Elsevier

    Aidah JUmahat, Jamaluddin Mahmud

  120. A Parametric Study and Simulations in Quantifying Human Skin Hyperelastic Parameters

    Article • Procedia Engineering, January 2012, Elsevier

    Jamaluddin Mahmud, Dr Mahmoud Chizari

  121. Development of Dynamic Ankle Foot Orthosis for Therapeutic Application

    Article • Procedia Engineering, January 2012, Elsevier

    Jamaluddin Mahmud

  122. Wing Structure Static Analysis using Superelement

    Article • Procedia Engineering, January 2012, Elsevier

    Jamaluddin Mahmud

  123. Capability Assessment of Finite Element Software in Predicting the Last Ply Failure of Composite Laminates

    Article • Procedia Engineering, January 2012, Elsevier

    Jamaluddin Mahmud

  124. Simulation and performance evaluation of a new type of powered Dynamic Ankle Foot Orthosis

    Article • December 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud

  125. Efficacy and Safety Testing of a New Biologically Based Design Ankle Foot Orthosis in Healthy Volunteer

    Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

    Jamaluddin Mahmud

  126. Mechanical assessment of two different methods of tripling hamstring tendons when using suspensory fixation

    Article • Knee Surgery Sports Traumatology Arthroscopy, July 2011, Springer Science + Business Media

    Jamaluddin Mahmud, Dr Mahmoud Chizari

  127. Novel technique to measure human skin deformation

    Article • Journal of Biomechanics, March 2010, Elsevier

    Jamaluddin Mahmud