All Stories

  1. Influence of treatment temperature towards the S phase layer formation on medical grade ASTM F138 stainless steel

    Article • January 2023, American Institute of Physics

    J SAEDON

  2. Karakteristik Kekerasan Lasan Titik Gesekan dan Pengadukan pada Paduan Aluminium 5052-H112

    Article • Jurnal ASIIMETRIK Jurnal Ilmiah Rekayasa & Inovasi, July 2022, Universitas Pancasila

    J SAEDON

  3. Responses of hybrid S phase layer to nanoscratching

    Article • Surface and Coatings Technology, July 2022, Elsevier

    J SAEDON

  4. Dicing Characterization on Optical Silicon Wafer Waveguide

    Article • Applied Mechanics and Materials, June 2020, Trans Tech Publications

    J SAEDON

  5. An Investigation on the Surface Integrity of Grade 5 Titanium Alloy Proceeding the Wire Electro-Discharge Machining (WEDM) Process

    Article • Applied Mechanics and Materials, June 2020, Trans Tech Publications

    J SAEDON

  6. Process Optimization of Friction Welded Spot Aluminum Alloy Using ANOVA

    Article • KnE Life Sciences, March 2020, Knowledge E

    J SAEDON

  7. Cutting tools simulation with different parameter

    Article • IOP Conference Series Materials Science and Engineering, May 2019, Institute of Physics Publishing

    J SAEDON

  8. Improvement of Positional Accuracy of Developed Dicing Machine

    Article • International Journal of Mechanical Engineering and Robotics Research, January 2019, EJournal Publishing

    J SAEDON

  9. Design and Optimization of Micromilling Cutting Tools

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    J SAEDON

  10. A review on feasibility study of ultrasonic assisted machining on aircraft component manufacturing

    Article • IOP Conference Series Materials Science and Engineering, December 2017, Institute of Physics Publishing

    Dr Saiful Bahri Mohamed, J SAEDON

  11. WEDM Titanium Alloy Using Response Surface Methodology

    Article • Key Engineering Materials, June 2017, Trans Tech Publications

    J SAEDON

  12. Development of Porous Ti-6Al-4V Dental Implant by Metal Injection Molding with Palm Stearin Binder System

    Article • Materials Science Forum, March 2017, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, J SAEDON

  13. Characteristics of Machining Parameters on WEDM Titanium Alloy

    Article • Materials Science Forum, September 2016, Trans Tech Publications

    J SAEDON

  14. Effect of Variable Geometry on Springback of High Strength Steel Materials

    Article • Advanced Materials Research, December 2015, Trans Tech Publications

    muhamad sani buang, J SAEDON

  15. ENGINE PERFORMANCE VALIDATION OF THE OPTIMAL DESIGN OF EXPERIMENT VALVETRAIN PARAMETERS

    Article • Jurnal Teknologi, September 2015, Penerbit UTM Press

    Mohd Shahrudin Mohd Alias, J SAEDON

  16. FORMATION OF HOLLOW SHAPE PORCELAIN BY USING A NEW INTEGRATED SLIP ROTARY MOULDING TECHNIQUE

    Article • Jurnal Teknologi, September 2015, Penerbit UTM Press

    J SAEDON

  17. MULTI-OBJECTIVE OPTIMIZATION IN WIRE-ELECTRICAL DISCHARGE MACHINING (WEDM) OF TITANIUM ALLOY

    Article • Jurnal Teknologi, September 2015, Penerbit UTM Press

    J SAEDON

  18. SIMULATION ANALYSIS OF PEAK TEMPERATURE IN WELD ZONES DURING FRICTION STIR PROCESS

    Article • Jurnal Teknologi, September 2015, Penerbit UTM Press

    J SAEDON

  19. DESIGN PARAMETERS SELECTION OF SPRINGBACK EFFECT IN AIR-V BENDING USING TAGUCHI APPROACH ON ADVANCE HIGH STRENGTH STEEL-DP590

    Article • Jurnal Teknologi, September 2015, Penerbit UTM Press

    J SAEDON

  20. Surface Integrity in Micromilling of Hardened AISI D2 Tool Steel

    Article • Applied Mechanics and Materials, September 2015, Trans Tech Publications

    J SAEDON

  21. SPRINGBACK EFFECT OF AUTOMOTIVE LOWER ARM COMPONENT PREPARED VIA BURRING PROCESSING

    Article • Jurnal Teknologi, August 2015, Penerbit UTM Press

    J SAEDON

  22. EFFECT OF DIE AND PUNCH RADIUS ON SPRINGBACK OF STAINLESS STEEL SHEET METAL IN THE AIR V-DIE BENDING PROCESS

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, June 2015, Universiti Malaysia Pahang Publisher

    J SAEDON

  23. Analysis of Tool Performance during Ball-End Milling of Aluminium Alloy 6061-T6

    Article • Applied Mechanics and Materials, May 2015, Trans Tech Publications

    Mr Mohd Shahir Kasim, J SAEDON

  24. Finite Element Analysis of Stress-Strain Response at the Tool Pin During Friction Stir Process

    Article • Procedia Computer Science, January 2015, Elsevier

    J SAEDON

  25. Multi geometrical image processing based on active vision agent

    Article • November 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Jamaluddin Mahmud, J SAEDON

  26. Multi-Objective Optimization Using Box-Behken of Response Surface Methodology for High-Speed Machining of Inconel 718

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Mr Mohd Shahir Kasim, J SAEDON

  27. Effect of Die Gap and Punch Travel on Springback in Air V-Bending Process Using Taguchi Method

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    J SAEDON

  28. Influence of Depth of Cut on Contact Phenomenon in Micromachining

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    J SAEDON

  29. Parameter Optimization of Debinding Injection Moulded Ti-6Al-4V Mix with Palm Stearin and Polyethylene

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    J SAEDON

  30. Simulation and Experimental Investigation of Springback in Air V-Bending Process Using Finite Element Method (FEM)

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    J SAEDON

  31. A study on kerf and material removal rate in wire electricaldischarge machining of Ti-6Al-4V: multi-objectives optimization

    Article • August 2014, Institute of Electrical & Electronics Engineers (IEEE)

    J SAEDON

  32. An Overview of the Impacts of Material Parameters on Springback

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    J SAEDON

  33. Modeling and Influence of Machining Parameters on Titanium Aloy

    Article • Advanced Materials Research, March 2014, Trans Tech Publications

    Mr Mohd Shahir Kasim, J SAEDON

  34. Modeling and Multi-Response Optimization on WEDM Ti6Al4V

    Article • Applied Mechanics and Materials, February 2014, Trans Tech Publications

    Mr Mohd Shahir Kasim, J SAEDON

  35. Cutting Performances of Coated PVD in High Speed End Milling of Aged Inconel 718

    Article • Materials Science Forum, November 2013, Trans Tech Publications

    Mr Mohd Shahir Kasim, J SAEDON

  36. Influence of Cutting Edge Radius in Micromachining AISI D2

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    J SAEDON

  37. Study on Fatigue Crack Growth of 6065-T4 Aluminium Alloy at Different Stress Ratio

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    J SAEDON

  38. Effect of Tubes Length and Annealing Temperature on Energy Absorption of Aluminium Alloy Tube 6061-T6 under Inversion Collapse Mode

    Article • Advanced Materials Research, May 2013, Trans Tech Publications

    J SAEDON

  39. Influence of Machining Parameters on Surface Roughness in WEDM Titanium Alloy

    Article • Advanced Materials Research, May 2013, Trans Tech Publications

    J SAEDON

  40. Impact of Plasma Spray Variables Parameters on Mechanical and Wear Behaviour of Plasma Sprayed Al2O3 3%wt TiO2 Coating in Abrasion and Erosion Application

    Article • Procedia Engineering, January 2012, Elsevier

    J SAEDON

  41. Micro-Milling of Hardened AISI D2 Tool Steel

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    J SAEDON

  42. Prediction and Optimization of Tool Life in Micromilling AISI D2 (∼62 HRC) Hardened Steel

    Article • Procedia Engineering, January 2012, Elsevier

    J SAEDON

  43. Micro-Milling of Hardened AISI D2 Tool Steel

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    J SAEDON

  44. Measurement of Spindle Thermal Growth on a Machine Intended for Micro/Meso Scale Milling

    Article • Key Engineering Materials, September 2010, Trans Tech Publications

    J SAEDON