All Stories

  1. Effect of Shot Blasting on Paste Boronizing of 316L Stainless Steel

    Article • Key Engineering Materials, June 2017, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, BULAN ABDULLAH

  2. Wear behaviour of copper/carbon nanotubes

    Article • Industrial Lubrication and Tribology, May 2017, Emerald

    Dr Muhammad Hussain H Ismail

  3. Tribology study of hydroxyapatite (HAp) scaffold blended single based binder via rheology and mechanical properties

    Article • Industrial Lubrication and Tribology, May 2017, Emerald

    Dr Muhammad Hussain H Ismail

  4. Development of Porous Ti-6Al-4V Dental Implant by Metal Injection Molding with Palm Stearin Binder System

    Article • Materials Science Forum, March 2017, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, J SAEDON

  5. Functionalization of Multi-Wall Carbon Nanotubes in Chemical Solution of H2SO4/HNO3 and its Dispersion in Different Media

    Article • Materials Science Forum, January 2017, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, Aidah JUmahat

  6. The Effect of TiH2 Particle on Rheological Behaviour of NiTi for Metal Injection Moulding

    Article • Materials Science Forum, January 2017, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  7. Rheological Behavior of Yttria Stabilized Zirconia (YSZ) Feedstock for Ceramic Injection Moulding (CIM) Process

    Article • Materials Science Forum, January 2017, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, MAHFUZAH ZAINUDIN

  8. Microstructures and Mechanical Properties of Ti-Nb Alloy at Different Composition of Nb Produced via Powder Metallurgy Route

    Article • Materials Science Forum, August 2016, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, Mazyan Yahaya

  9. Injection moulding of SS316L stainless steel

    Article • Materials Science Forum, August 2016, Trans Tech Publications

    Dr Mohd Afian Omar, Dr Muhammad Hussain H Ismail, Assoc Prof Nor Aini Wahab

  10. aluminium foam

    Article • Materials Science Forum, March 2016, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  11. An Overview of Powder Metallurgy (PM) Method for Porous Nickel Titanium Shape Memory Alloy (SMA)

    Article • Advanced Materials Research, January 2016, Trans Tech Publications

    Dr Mohd Afian Omar, Dr Muhammad Hussain H Ismail, zulaila abdullah

  12. Shape Memory Behaviour of NiTi Alloy Produced by MIM Using Palm Stearin Based Binder

    Article • Advanced Materials Research, January 2016, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  13. The Influence of Single Based Binder of Palm Stearin in HAP Feedstock on Rheological Properties Used for Ceramic Injection Moulding (CIM)

    Article • Advanced Materials Research, December 2015, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, Dr Mimi Azlina Abu Bakar

  14. FEEDSTOCK FLOW CHARACTERIZATION AND PROCESSING OF POROUS NITI BY METAL INJECTION MOULDING (MIM)

    Article • Jurnal Teknologi, October 2015, Penerbit UTM Press

    Dr Muhammad Hussain H Ismail

  15. A METALLURGICAL OVERVIEW OF TI – BASED ALLOY IN BIOMEDICAL APPLICATIONS

    Article • Jurnal Teknologi, October 2015, Penerbit UTM Press

    Dr Muhammad Hussain H Ismail

  16. Development of Porous Ti-6Al-4V Mix with Palm Stearin Binder by Metal Injection Molding Technique

    Article • American Journal of Applied Sciences, October 2015, Science Publications

    Dr Muhammad Hussain H Ismail

  17. INFLUENCE OF SPACE HOLDER ON RHEOLOGICAL BEHAVIOR OF COPPER FEEDSTOCKS FOR METAL INJECTION MOLDING

    Article • Jurnal Teknologi, September 2015, Penerbit UTM Press

    Dr Muhammad Hussain H Ismail, Assoc Prof Nor Aini Wahab

  18. SHAPE MEMORY INVESTIGATION OF SMART CAMAR LOGO USING NITI ALLOY WIRE

    Article • Jurnal Teknologi, September 2015, Penerbit UTM Press

    Dr Muhammad Hussain H Ismail

  19. INVESTIGATION ON TEMPERATURE EFFECT OF CARBURIZED STEEL USING POWDER AND PASTE COMPOUND

    Article • Jurnal Teknologi, September 2015, Penerbit UTM Press

    Dr Muhammad Hussain H Ismail

  20. ANALYSIS ON MICROSTRUCTURE, HARDNESS AND SURFACE ROUGHNESS OF SHOT BLASTED-PASTE BORONIZED 316 AUSTENITIC STAINLESS STEEL

    Article • Jurnal Teknologi, September 2015, Penerbit UTM Press

    Dr Muhammad Hussain H Ismail

  21. Processing of Injection Moulded of Synthesized HAp by Single Step Wick-Debinding and Sintering

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  22. Processing of Porous Copper by Powder Metallurgy Route with Different Types of Space Holder Materials (SHMs)

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, Aidah JUmahat

  23. Properties of Ni-Rich NiTi Alloys Produced by Powder Metallurgy Route

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  24. Aluminium foam

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, Aidah JUmahat

  25. The sintered properties of hydroxyapatite scaffold

    Article • Applied Mechanics and Materials, May 2015, Trans Tech Publications

    Dr Mimi Azlina Abu Bakar, Dr Muhammad Hussain H Ismail

  26. Shape Memory Alloys as Linear Drives in Robot Hand Actuation

    Article • Procedia Computer Science, January 2015, Elsevier

    Dr Muhammad Hussain H Ismail

  27. Viscosity Analysis of Copper Powder Mixed with Palm Stearin Based Binder

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, Assoc Prof Nor Aini Wahab, Aidah JUmahat

  28. Feedstock Characterization of Elemental Nickel and Titanium Powders Mixture for Metal Injection Moulding Process

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  29. Synthesized Hydroxyapatite Powder from Clamshell via Chemical Precipitation Method

    Article • Advanced Materials Research, March 2014, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  30. Rheological Properties of Hydroxyapatite Synthesized Clamshell Mix with Palm Stearin Binder System

    Article • Advanced Materials Research, March 2014, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  31. Interaction between Binder and Powder in Injection Moulding of 316L Stainless Steel

    Article • Advanced Materials Research, January 2014, Trans Tech Publications

    Dr Mohd Afian Omar, Dr Muhammad Hussain H Ismail

  32. Magnesite Effect to the Alumina Sintering for Heat Sink Application

    Article • Applied Mechanics and Materials, December 2013, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  33. Sintering of Alumina-AIN System for Heat Sink

    Article • Applied Mechanics and Materials, December 2013, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  34. Characterization and Rheological Studies on Ready-Made Feedstock of Stainless Steel 316L in Metal Injection Molding (MIM) Process

    Article • Applied Mechanics and Materials, December 2013, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  35. Porous Copper Fabricated through Powder Metallurgy Route Using NaCl Space Holder

    Article • Applied Mechanics and Materials, November 2013, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  36. Mechanical Properties of Aluminium Foam by Conventional Casting Combined with NaCl Space Holder

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    Dr Muhammad Hussain H Ismail

  37. An Innovative Improvement on Standard Testing Procedure for Biomaterials under Uniaxial Tension

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    Dr Muhammad Hussain H Ismail, Jamaluddin Mahmud

  38. Characterisation of soft tissues biomechanical properties using 3D Numerical Approach

    Article • April 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Muhammad Hussain H Ismail, Jamaluddin Mahmud

  39. Quantifying the Biomechanical Properties of Bovine Skin under Uniaxial Tension

    Article • Journal of Medical and Bioengineering, January 2013, EJournal Publishing

    Dr Muhammad Hussain H Ismail

  40. Formation of microporous NiTi by transient liquid phase sintering of elemental powders

    Article • Materials Science and Engineering C, August 2012, Elsevier

    Dr Muhammad Hussain H Ismail

  41. Porous NiTi alloy by metal injection moulding/sintering of elemental powders: Effect of sintering temperature

    Article • Materials Letters, March 2012, Elsevier

    Dr Muhammad Hussain H Ismail