All Stories

  1. Multi-Frequency Aeroelastic ROM for Transonic Compressors
  2. Development and Test of AFT-Fuselage BLI Propulsor Experiment
  3. A Numerical Investigation on the Effects of Vaned Diffusers on the Aerodynamic Performance of a Low Pressure-Ratio Methane Centrifugal Compressor
  4. Multi-fidelity multidisciplinary meta-model based optimization of a slender body with fins
  5. Investigation of aerodynamic effects and dominant design variables of cavity squealer-tip in three-dimensional performance of a centrifugal compressor
  6. Experimental investigation of small wind turbine airfoil under pulsate suction jet
  7. An experimental study exploring heat transfer enhancement in tube in tube heat exchanger with pulsating flow
  8. A Reduced Order Model Based on Aerodynamic Influence Coefficients for Aeroelastic Computations in Transonic Compressors
  9. Towards New Insights in Gas Turbine Aerothermodynamics With Wall-Modeled LES and Immersed Boundary Method
  10. Experimental investigation of multi-step airfoils in low Reynolds numbers applications
  11. An actuator line method for performance prediction of HAWTs at urban flow conditions: A case study of rooftop wind turbines
  12. Computational Evaluation of Turbo- and Electric-Powered Simulators for Turbofan Wind Tunnel Test
  13. Powered turbofan effects on aircraft aerodynamics at high-lift: A study on the NASA CRM-HL
  14. The impact of platform motion phase differences on the power and load performance of tandem floating offshore wind turbines
  15. Impact of solidity and speed ratio on the performance of a contra-rotating fan
  16. High-Reynolds Compressible Flows Simulation with Wall-Modeled LES and Immersed Boundary Method
  17. Modelling of two tandem floating offshore wind turbines using an actuator line model
  18. On the coupling between wall-modeled LES and immersed boundary method towards applicative compressible flow simulations
  19. Numerical and experimental studies on BLI propulsor architectures
  20. Numerical Assessment of a Two-Phase Model for Propulsive Pump Performance Prediction
  21. A Critical Review of CFD Modeling Approaches for Darrieus Turbines: Assessing Discrepancies in Power Coefficient Estimation and Wake Vortex Development
  22. Cooling Strategies for Heated Cylinders Using Pulsating Airflow with Different Waveforms
  23. Experimental and numerical investigations of aerodynamic characteristics for wind turbine airfoil using multi-suction jets
  24. Research on the effect of yawing motion on tidal turbine performance based on actuator-line method
  25. Development of a Reduced Order Model Based on Aerodynamic Influence Coefficients to Simulate Aeroelastic Phenomena in Axial Compressor Blades
  26. Historical Developments in Fan Technologies for Aeroengines
  27. 3D CFD modeling for the limits’ identification of 2D flow pattern’s effects on the aerodynamic performance of a reference H-Darrieus prototype
  28. Design optimization and flow analysis of discrete tip injection in a transonic compressor based on nonlinear harmonic method and endwall blockage attenuation
  29. URANOS: A GPU accelerated Navier-Stokes solver for compressible wall-bounded flows
  30. Correction to: Speed and torque control of pneumatic motors using controlled pulsating flow
  31. Speed and torque control of pneumatic motors using controlled pulsating flow
  32. Study on aerodynamic performance of inverted cone vertical axis wind turbine with different rotor configurations
  33. Analysis of middle-to-far wake behind floating offshore wind turbines in the presence of multiple platform motions
  34. CFD-Based Analysis of Installed Fuel Consumption and Aerodynamics of Transonic Transport Aircraft during Cruise Flight
  35. Comparison of engine models of UHBPR turbofan at high incidence
  36. Fullscale Optimization and Fan Design of a Rear BLI Shrouded Propulsor
  37. GPU-acceleration of Navier-Stokes solvers for compressible wall-bounded flows: the case of URANOS
  38. Enabling Methodologies for Renewable and Sustainable Energy
  39. Aeropropulsive assessment of engine installation at cruise for UHBPR turbofan with body force fan modelling
  40. Effect of convective schemes in wall-resolved and wall-modeled LES of compressible wall turbulence
  41. An overall blockage attenuation-based aerodynamic performance and stability design optimization method for transonic axial flow compressors
  42. Speed and Torque Control of Pneumatic Motors Using Controlled Pulsating Flow
  43. CFD Modeling of Wind Turbine Blades with Eroded Leading Edge
  44. Analysis of installation aerodynamics and comparison of optimised configuration of an ultra-high bypass ratio turbofan nacelle
  45. Critical endwall blockage attenuation-based automatic optimization of casing treatment design for transonic axial flow compressor
  46. Robust Design Optimisation of S-ducts
  47. Design of a Rear BLI Non-Axisymmetric Propulsor for a Transonic Flight Experiment
  48. Analysis of Ultra-High Bypass Ratio Turbofan Nacelle Geometries With Conventional and Short Intakes at Take-Off and Cruise
  49. Multi-Objective RANS Aerodynamic Optimization of a Hypersonic Intake Ramp at Mach 5
  50. ANALYSIS OF DRAG SOURCES IN A FULLY SUBMERGED WATERJET
  51. A straightforward strategy to unify WR/WMLES approaches for compressible wall-bounded flows
  52. Optimum Operating Parameters and Blade Setting of a High-Speed Propeller
  53. Hypersonic intake design using a CFD data-driven multi-objective optimisation strategy
  54. Ultra-high bypass nacelle geometry design space exploration
  55. Large-Eddy-Simulations of the unsteady behaviour of a Mach 5 hypersonic intake
  56. Sensitivity analysis of nacelle intake high-incidence aerodynamics including a body force fan model
  57. Axial Rotor Design under Clean and Distortion Conditions using Mean-Line and CFD Methods
  58. Time-Accurate Experimental Investigation of Hypersonic Inlet Buzz at Mach 5
  59. Optimization with Surrogate Models: Flow and Heat Transfer Applications
  60. Shape Optimization of a Curved Duct with Free Form Deformations
  61. Comparison of Optimization Strategies for High-Lift Design
  62. Proposal for a coupled aerodynamic–structural wind turbine blade optimization
  63. Kriging-assisted design optimization of S-shape supersonic compressor cascades
  64. Thermal and electrical performance of an integrated PV-PCM system in double skin façades: A numerical study
  65. Numerical Study of Support Interferences on the SOAR Separation Wind Tunnel Test
  66. Variable-Speed Rotor Helicopters: Performance Comparison Between Continuously Variable and Fixed-Ratio Transmissions
  67. Aero-structural design optimization of vertical axis wind turbines
  68. Performance-optimized airfoil for Darrieus wind turbines
  69. Surrogate-Based Shape Optimization of Stall Margin and Efficiency of a Centrifugal Compressor
  70. A surrogate-assisted evolutionary algorithm based on the genetic diversity objective
  71. A computational assessment of the aerodynamic performance of a tilted Darrieus wind turbine
  72. Computational assessment of the DeepWind aerodynamic performance with different blade and airfoil configurations
  73. Aerodynamic Benchmarking of the Deepwind Design
  74. A Methodology for Determining the Optimal Rotational Speed of a Variable RPM Main Rotor/Turboshaft Engine System
  75. Aerodynamic shape optimization of aircraft components using an advanced multi-objective evolutionary approach
  76. Innovative Discrete-Vortex Model for Dynamic Stall Simulations
  77. Evaluation of the different aerodynamic databases for vertical axis wind turbine simulations
  78. Computational design of S-Duct intakes for distributed propulsion
  79. Aerodynamic Shape Optimization in Aeronautics: A Fast and Effective Multi-Objective Approach
  80. Proposal for an innovative chord distribution in the Troposkien vertical axis wind turbine concept
  81. Turbojet Engine Performance Tuning With a New Map Adaptation Concept
  82. Optimal spanwise chord and thickness distribution for a Troposkien Darrieus wind turbine
  83. Multi-objective structural optimization of a HAWT composite blade
  84. Optimization of a Darrieus vertical-axis wind turbine using blade element – momentum theory and evolutionary algorithm
  85. A Simplex-Crossover-Based Multi-Objective Evolutionary Algorithm
  86. Turbofan multiobjective‐multipoint optimization for UAV/UCAV applications
  87. Philoponus' Comments to Aristotle's Physics as the First Step to the Development of Modern Laws of Motion
  88. Progress in Gas Turbine Performance
  89. Numerical Simulation of a Straight-Bladed Vertical-Axis Water Turbine Operating in a 2 m/s Current
  90. Contrasting the Parasitic Torque on a Drag-Driven VAWT through a Variable-Blade Rotor Architecture
  91. Numerical Assessment of Pneumatic Devices on the Wing/Fuselage Junction of a Tiltrotor
  92. A Simplex Crossover based evolutionary algorithm including the genetic diversity as objective
  93. Numerical evaluation of aerodynamic and inertial contributions to Darrieus wind turbine blade deformation
  94. Recent advances in transonic axial compressor aerodynamics
  95. Performance of a Turboshaft Engine for Helicopter Applications Operating at Variable Shaft Speed
  96. Evaluation of the wind potential in the province of Belluno (Italy)
  97. Numerical performance and stress prediction for a vertical-axis wind turbine as a function of the aerodynamic control strategy
  98. GeDEA-II
  99. Preliminary Study on a Wide-Speed-Range Helicopter Rotor/Turboshaft System
  100. Multi-Objective Optimization of Helicopter Airfoils Using Surrogate-Assisted Memetic Algorithms
  101. Improvements in Off Design Aeroengine Performance Prediction Using Analytic Compressor Map Interpolation
  102. Effect of Blade Inclination Angle on a Darrieus Wind Turbine
  103. Numerical Investigation of Laminar to Turbulent Boundary Layer Transition on a Naca 0012 Airfoil for Vertical-Axis Wind Turbine Applications
  104. Advances in Gas Turbine Technology
  105. State-of-Art of Transonic Axial Compressors
  106. The Darrieus wind turbine: Proposal for a new performance prediction model based on CFD
  107. Efficiency enhancement in transonic compressor rotor blades using synthetic jets: A numerical investigation
  108. High-Lift Multi-Element Airfoil Shape and Setting Optimization Using Multi-Objective Evolutionary Algorithms
  109. Airfoil Data Fitting Using Multivariate Smoothing Thin Plate Splines
  110. Nonparametric Fitting of Aerodynamic Data Using Smoothing Thin-Plate Splines
  111. Development of a Multiobjective Optimization Method for Aerospace Turbopump Design
  112. Modeling Strategy and Numerical Validation for a Darrieus Vertical Axis Micro-Wind Turbine
  113. Effect of Blade Inclination Angle on a Darrieus Wind Turbine
  114. Aerodynamic Optimization of an Impulse Turbine Cascade Including Laminar/Turbulent Transition Prediction
  115. Development of a Medium-Size Steam Reformer for CHP Applications Based on PEM Fuel Cells
  116. Reduction of NO emissions in a turbojet combustor by direct water/steam injection: Numerical and experimental assessment
  117. Shock/Boundary-Layer/Tip-Clearance Interaction in a Transonic Rotor Blade
  118. Efficiency and Stall Margin Enhancement in Transonic Compressor Rotors Using Synthetic Jets: A Numerical Investigation
  119. Efficient Aerodynamic Optimization of an Impulse Turbine Rotor Cascade
  120. Turbo-Pump Pressurization Concept for Hybrid Propulsion Thrusters Application to Launch Vehicles
  121. Aerodynamic Behaviour of a Novel Three-Dimensional Shaped Transonic Compressor Rotor Blade
  122. Effect of Forward and Aft Lean on the Performance of a Transonic Compressor Rotor
  123. Fast-Accurate Model for Performance Prediction of Multistage Impulse Turbine Stages
  124. Assessment of Loss Correlations for Performance Prediction of Low Reaction Gas Turbine Stages
  125. Design, manufacturing and operation of a small turbojet-engine for research purposes
  126. Aerodynamics of swept and leaned transonic compressor-rotors
  127. Performance Prediction of Subsonic Vaned Diffusers Using an Integral Boundary Layer Method
  128. Experimental and numerical analyses to enhance the performance of a microturbine diffuser
  129. On the Aerodynamics of Swept and Leaned Transonic Compressor Rotors
  130. Validation of a Navier-Stokes Solver for CFD Computations of Transonic Compressors
  131. Significance of blade element theory in performance prediction of marine propellers
  132. Three-Dimensional Multi-Objective Design Optimization of a Transonic Compressor Rotor
  133. Optimal Navier–Stokes Design of Compressor Impellers Using Evolutionary Computation
  134. Three-Dimensional Multi-Objective Design Optimization of a Transonic Compressor Rotor
  135. Genetic Diversity as an Objective in Multi-Objective Evolutionary Algorithms
  136. Development of High-Performance Airfoils for Axial Flow Compressors Using Evolutionary Computation
  137. Axial-Flow Compressor Model Based on a Cascade Stacking Technique and Neural Networks
  138. Towards a Reduction of Compressor Blade Dynamic Loading by Means of Rotor-Stator Interaction Optimization
  139. Optimal Design of Horizontal-Axis Wind Turbines Using Blade-Element Theory and Evolutionary Computation
  140. Design optimization of vaned diffusers for centrifugal compressors using genetic algorithms