All Stories

  1. Calculation of interphase elastic properties of esterified cellulose nanocrystal/epoxy bio-nanocomposites using analytical and finite element methods

    Article • Science Progress, January 2025, SAGE Publications

    Associate Professor Homayoun Hadavinia

  2. Performance of polyurethane and polyurethane nanocomposites modified by graphene, carbon nanotubes, and fumed silica in dry and wet environments

    Article • Polymers and Polymer Composites, January 2024, SAGE Publications

    Associate Professor Homayoun Hadavinia

  3. CFD Modeling of Wind Turbine Blades with Eroded Leading Edge

    Article • Fluids, September 2022, MDPI AG

    Associate Professor Homayoun Hadavinia

  4. Graphene/sol–gel modified polyurethane coating for wind turbine blade leading edge protection: Properties and performance

    Article • Polymers and Polymer Composites, January 2022, SAGE Publications

    Associate Professor Homayoun Hadavinia

  5. Nanoengineered Graphene-Reinforced Coating for Leading Edge Protection of Wind Turbine Blades

    Article • Coatings, September 2021, MDPI AG

    Associate Professor Homayoun Hadavinia

  6. Quantifying damping coefficient and attenuation at different frequencies for graphene modified polyurethane by drop ball test

    Article • Polymer Testing, August 2021, Elsevier

    Associate Professor Homayoun Hadavinia

  7. Experimental investigation of quasi-static behavior of composite and fiber metal laminate panels modified by graphene nanoplatelets

    Article • Journal of Reinforced Plastics and Composites, March 2021, SAGE Publications

    Associate Professor Homayoun Hadavinia

  8. High-velocity impact loading in honeycomb sandwich panels reinforced with polymer foam: a numerical approach study

    Article • Iranian Polymer Journal, June 2020, Springer Science + Business Media

    Associate Professor Homayoun Hadavinia

  9. On the extent of fracture toughness transfer from 1D/2D nanomodified epoxy matrices to glass fibre composites

    Article • Journal of Materials Science, January 2020, Springer Science + Business Media

    Associate Professor Homayoun Hadavinia

  10. Rain erosion-resistant coatings for wind turbine blades: A review

    Article • Polymers and Polymer Composites, May 2019, SAGE Publications

    Associate Professor Homayoun Hadavinia

  11. Ballistic impact behaviour of glass fibre reinforced polymer composite with 1D/2D nanomodified epoxy matrices

    Article • Composites Part B Engineering, March 2019, Elsevier

    Associate Professor Homayoun Hadavinia

  12. Free vibration and nonlinear dynamic response of imperfect nanocomposite FG-CNTRC double curved shallow shells in thermal environment

    Article • European Journal of Mechanics - A/Solids, February 2019, Elsevier

    Associate Professor Homayoun Hadavinia

  13. Behaviour of connections for hybrid FRP/steel shear walls

    Article • Thin-Walled Structures, January 2019, Elsevier

    Associate Professor Homayoun Hadavinia

  14. Ballistic performance of Kevlar fabric impregnated with nanosilica/PEG shear thickening fluid

    Article • Composites Part B Engineering, December 2018, Elsevier

    Associate Professor Homayoun Hadavinia

  15. Experimental investigation of quasistatic penetration tests on honeycomb sandwich panels filled with polymer foam

    Article • Mechanics of Advanced Materials and Structures, October 2018, Taylor & Francis

    Associate Professor Homayoun Hadavinia, Gholamhossein Liaghat

  16. Using the Equivalent Fiber Approach in Two-Scale Modeling of the Elastic Behavior of Carbon Nanotube/Epoxy Nanocomposite

    Article • Nanomaterials, September 2018, MDPI AG

    Associate Professor Homayoun Hadavinia

  17. Comparison of the behaviour of steel, pure FRP and hybrid shear walls under cyclic seismic loading in aspect of stiffness degradation and energy absorption

    Article • Construction and Building Materials, March 2018, Elsevier

    Associate Professor Homayoun Hadavinia

  18. Experimental and numerical analysis of impact on curved nanocomposite panels

    Article • Mechanics of Advanced Materials and Structures, February 2018, Taylor & Francis

    Gholamhossein Liaghat, Associate Professor Homayoun Hadavinia

  19. RETRACTED: Investigations on electrophoretic deposition of carbon nanotubes on glass textures to improve polymeric composites interface

    Article • Composites Science and Technology, February 2018, Elsevier

    Associate Professor Homayoun Hadavinia

  20. Experimental investigation of impact loading on honeycomb sandwich panels filled with foam

    Article • International Journal of Crashworthiness, January 2018, Taylor & Francis

    Gholamhossein Liaghat, Associate Professor Homayoun Hadavinia

  21. Enhancement of Fracture Toughness of Epoxy Nanocomposites by Combining Nanotubes and Nanosheets as Fillers

    Article • Materials, October 2017, MDPI AG

    Associate Professor Homayoun Hadavinia

  22. Full-Scale Fatigue Testing of a Wind Turbine Blade in Flapwise Direction and Examining the Effect of Crack Propagation on the Blade Performance

    Article • Materials, October 2017, MDPI AG

    Associate Professor Homayoun Hadavinia

  23. Toughening of Epoxy Adhesives by Combined Interaction of Carbon Nanotubes and Silsesquioxanes

    Article • Materials, September 2017, MDPI AG

    Associate Professor Homayoun Hadavinia

  24. Enhancement of the Electrical Conductivity and Interlaminar Shear Strength of CNT/GFRP Hierarchical Composite Using an Electrophoretic Deposition Technique

    Article • Materials, September 2017, MDPI AG

    Associate Professor Homayoun Hadavinia

  25. Improving the fracture toughness properties of epoxy using graphene nanoplatelets at low filler content

    Article • Nanocomposites, July 2017, Taylor & Francis

    Associate Professor Homayoun Hadavinia

  26. Experimental Studies of Stiffness Degradation and Dissipated Energy in Glass Fibre Reinforced Polymer Composite under Fatigue Loading

    Article • Polymers and Polymer Composites, July 2017, SAGE Publications

    Associate Professor Homayoun Hadavinia

  27. Experimental and numerical analysis of penetration into Kevlar fabric impregnated with shear thickening fluid

    Article • Journal of Thermoplastic Composite Materials, June 2017, SAGE Publications

    Associate Professor Homayoun Hadavinia, Gholamhossein Liaghat

  28. Analytical and experimental study of high-velocity impact on ceramic/nanocomposite targets

    Article • Journal of Composite Materials, February 2017, SAGE Publications

    Associate Professor Homayoun Hadavinia, Gholamhossein Liaghat

  29. Experimental investigation on the energy absorption and contact force of unstiffened and grid-stiffened composite cylindrical shells under lateral compression

    Article • Composite Structures, September 2016, Elsevier

    Associate Professor Homayoun Hadavinia

  30. Analytical investigation of high-velocity impact on hybrid unidirectional/woven composite panels

    Article • Journal of Thermoplastic Composite Materials, August 2016, SAGE Publications

    Associate Professor Homayoun Hadavinia, Gholamhossein Liaghat

  31. Performance of pristine and retrofitted hybrid steel/fibre reinforced polymer composite shear walls

    Article • Construction and Building Materials, August 2016, Elsevier

    Associate Professor Homayoun Hadavinia

  32. Glass fibre reinforced polymer composites toughened with acrylonitrile butadiene nanorubber

    Article • Composites Part B Engineering, March 2016, Elsevier

    Associate Professor Homayoun Hadavinia

  33. Toughening of carbon fibre reinforced polymer composites with rubber nanoparticles for advanced industrial applications

    Article • eXPRESS Polymer Letters, January 2016, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Associate Professor Homayoun Hadavinia

  34. A two-scale damage model for high cycle fatigue delamination in laminated composites

    Article • Composites Science and Technology, December 2015, Elsevier

    Associate Professor Homayoun Hadavinia

  35. Investigation of the high velocity impact behavior of grid cylindrical composite structures

    Article • Polymer Composites, November 2015, Wiley

    Associate Professor Homayoun Hadavinia

  36. Vibration and nonlinear dynamic response of imperfect three-phase polymer nanocomposite panel resting on elastic foundations under hydrodynamic loads

    Article • Composite Structures, November 2015, Elsevier

    Associate Professor Homayoun Hadavinia

  37. Influence of nanorubber toughening on the tensile deformation and tensile fatigue behaviour of a carbon fibre-reinforced epoxy composite

    Article • Journal of Composite Materials, October 2015, SAGE Publications

    Associate Professor Homayoun Hadavinia

  38. Characterising mode I/mode II fatigue delamination growth in unidirectional fibre reinforced polymer laminates

    Article • Materials & Design (1980-2015), February 2015, Elsevier

    Associate Professor Homayoun Hadavinia

  39. Enumeration search method for optimisation of stacking sequence of laminated composite plates subjected to buckling

    Article • Open Engineering, January 2015, De Gruyter

    Associate Professor Homayoun Hadavinia

  40. Rheological properties, cure characteristics, and morphology of acrylonitrile-based nanorubber modified epoxy

    Article • Journal of Applied Polymer Science, January 2015, Wiley

    Associate Professor Homayoun Hadavinia

  41. Improving the fracture toughness and the strength of epoxy using nanomaterials – a review of the current status

    Article • Nanoscale, January 2015, Royal Society of Chemistry

    Associate Professor Homayoun Hadavinia

  42. Compressive Properties of Nanoclay-Reinforced Syntactic Foams at Quasi-Static and High Strain Rate Loading

    Article • Polymer-Plastics Technology and Engineering, June 2014, Taylor & Francis

    Associate Professor Homayoun Hadavinia, Gholamhossein Liaghat, Professor Mahmood Mehrdad Shokrieh

  43. Quasi-static and dynamic compressive properties of ceramic microballoon filled syntactic foam

    Article • Journal of Composite Materials, May 2014, SAGE Publications

    Associate Professor Homayoun Hadavinia, Professor Mahmood Mehrdad Shokrieh, Gholamhossein Liaghat

  44. Building Delamination Fracture Envelope under Mode I/Mode II Loading for FRP Composite Materials

    Article • October 2013, Wiley

    Associate Professor Homayoun Hadavinia

  45. Solar Selective Coatings: Industrial State-of-the-Art

    Article • Recent Patents on Materials Science, November 2012, Bentham Science Publishers

    Associate Professor Homayoun Hadavinia

  46. Experimental Studies on Conducting Polyaniline

    Article • Recent Patents on Materials Science, July 2012, Bentham Science Publishers

    Associate Professor Homayoun Hadavinia, Stephen Barton, Peter Foot

  47. Compression and Recovery Behaviour of Polyamide-6 Based Foams

    Article • Polymers and Polymer Composites, June 2012, SAGE Publications

    Peter Foot, Associate Professor Homayoun Hadavinia

  48. Delamination of impacted composite structures by cohesive zone interface elements and tiebreak contact

    Article • Open Engineering, January 2012, De Gruyter

    Associate Professor Homayoun Hadavinia

  49. Forward to special issue on blast and impact of engineering structures

    Article • Open Engineering, January 2012, De Gruyter

    Associate Professor Homayoun Hadavinia

  50. Performance of Nylon Based Polymer Foams at Elevated Temperature under Tensile Loading

    Article • Key Engineering Materials, September 2011, Trans Tech Publications

    Associate Professor Homayoun Hadavinia, Peter Foot

  51. Finite Element Simulation of Axial Crush of Thin-Walled Tubes with Different Cross-Sections: Vehicle/Pole Impact Applications

    Article • International Journal of Vehicle Structures and Systems, August 2011, MAFTREE

    Associate Professor Homayoun Hadavinia

  52. Modelling of Low Velocity Impact of Laminated Composite Substructures

    Article • International Journal of Vehicle Structures and Systems, April 2011, MAFTREE

    Associate Professor Homayoun Hadavinia

  53. Special Issue on Structural Impact and Crashworthiness: Part II - Preface

    Article • International Journal of Vehicle Structures and Systems, April 2011, MAFTREE

    Associate Professor Homayoun Hadavinia

  54. Special Issue on Structural Impact and Crashworthiness: Part I - Preface

    Article • International Journal of Vehicle Structures and Systems, April 2011, MAFTREE

    Associate Professor Homayoun Hadavinia

  55. Design of Automotive Metal and Composite Chassis Structures

    Article • Recent Patents on Mechanical Engineering, March 2011, Bentham Science Publishers

    Associate Professor Homayoun Hadavinia

  56. Applications of Intrinsically Conducting Polymers

    Article • Recent Patents on Mechanical Engineering, November 2010, Bentham Science Publishers

    Associate Professor Homayoun Hadavinia

  57. Design of Automotive Metal and Composite Chassis Structures

    Article • Recent Patents on Mechanical Engineering, November 2010, Bentham Science Publishers

    Associate Professor Homayoun Hadavinia

  58. Mixed-Mode Delamination Failure of Z-Pinned Hybrid Laminated Composites

    Article • Key Engineering Materials, November 2010, Trans Tech Publications

    Associate Professor Homayoun Hadavinia

  59. Behaviour of steel shear wall systems with cut-outs and stiffeners

    Article • July 2010, Taylor & Francis

    Associate Professor Homayoun Hadavinia

  60. Recent Patents in Automotive Gull-Wing Door Hinge Mechanisms

    Article • Recent Patents on Mechanical Engineering, June 2010, Bentham Science Publishers

    Associate Professor Homayoun Hadavinia

  61. Effect of delamination failure in crashworthiness analysis of hybrid composite box structures

    Article • Materials & Design (1980-2015), March 2010, Elsevier

    Associate Professor Homayoun Hadavinia

  62. Off-axis Crashworthiness Characteristic of Woven Glass/Epoxy Composite Box Structures

    Article • Journal of Reinforced Plastics and Composites, February 2010, SAGE Publications

    Associate Professor Homayoun Hadavinia

  63. Recent Patents in Automotive Gull-Wing Door Hinge Mechanisms

    Article • Recent Patents on Mechanical Engineering, January 2010, Bentham Science Publishers

    Associate Professor Homayoun Hadavinia

  64. Free vibration analysis of sandwich structures with a flexible functionally graded syntactic core

    Article • Composite Structures, November 2009, Elsevier

    Associate Professor Homayoun Hadavinia

  65. Effect of Side-Wall Reinforcement on Energy Absorption of Thin-Wall Cylindrical Damper

    Article • Key Engineering Materials, October 2009, Trans Tech Publications

    Associate Professor Homayoun Hadavinia

  66. Investigation of the Compression Recovery Properties of Polyamide-6 Cellular Solid over the Temperature Range of -5°C to 90°C

    Article • Key Engineering Materials, October 2009, Trans Tech Publications

    Associate Professor Homayoun Hadavinia, Peter Foot

  67. Effects of Mode-I and Mode-II interlaminar fracture toughness on the energy absorption of CFRP twill/weave composite box sections

    Article • Composite Structures, June 2009, Elsevier

    Associate Professor Homayoun Hadavinia

  68. Experimental studies on fracture characterisation and energy absorption of GFRP composite box structures

    Article • Composite Structures, April 2009, Elsevier

    Associate Professor Homayoun Hadavinia

  69. Crushing Behaviour of CFRP Composite Structure

    Article • Key Engineering Materials, July 2008, Trans Tech Publications

    Associate Professor Homayoun Hadavinia

  70. Investigation of energy absorption of a GFRP composite crash box

    Article • April 2008, WITPRESS LTD.

    Associate Professor Homayoun Hadavinia

  71. Determination of fracture energy and tensile cohesive strength in Mode I delamination of angle-ply laminated composites

    Article • Composite Structures, February 2008, Elsevier

    Associate Professor Homayoun Hadavinia

  72. Crashworthiness Optimization of Crash Box in Automotive Structure

    Article • September 2007, CrossRef Test Account

    Associate Professor Homayoun Hadavinia

  73. Crashworthiness Optimization of Crash Box in Automotive Structure

    Article • Key Engineering Materials, September 2007, Trans Tech Publications

    Associate Professor Homayoun Hadavinia

  74. Ductile crack growth based on damage criterion: Experimental and numerical studies

    Article • Mechanics of Materials, July 2007, Elsevier

    Associate Professor Homayoun Hadavinia

  75. Evaluation of Fracture in a Three Stage Forging Process Using Continuum Damage Mechanics

    Article • January 2007, American Institute of Physics

    Associate Professor Homayoun Hadavinia

  76. Effect of Transverse Shear on Deformation of Thick Laminated Sandwich Plates

    Article • November 2006, CrossRef Test Account

    Associate Professor Homayoun Hadavinia

  77. Effect of Transverse Shear on Deformation of Thick Laminated Sandwich Plates

    Article • Key Engineering Materials, November 2006, Trans Tech Publications

    Associate Professor Homayoun Hadavinia

  78. A numerical analysis of the elastic-plastic peel test

    Article • Engineering Fracture Mechanics, November 2006, Elsevier

    Associate Professor Homayoun Hadavinia

  79. The root rotation in double cantilever beam and peel tests

    Article • Mechanics of Materials, July 2006, Elsevier

    Associate Professor Homayoun Hadavinia

  80. A Cohesive Zone Global Energy Analysis of an Impact Loaded Bi-material Strip in Shear

    Article • International Journal of Fracture, March 2006, Springer Science + Business Media

    Associate Professor Homayoun Hadavinia

  81. Anisotropic elastic and elastic–plastic bending solutions for edge constrained beams

    Article • International Journal of Solids and Structures, September 2005, Elsevier

    Associate Professor Homayoun Hadavinia

  82. Comparison of Analytical, Numerical, and Experimental Methods in Deriving Fracture Toughness Properties of Adhesives Using Bonded Double Lap Joint Specimens

    Article • The Journal of Adhesion, May 2005, Taylor & Francis

    Associate Professor Homayoun Hadavinia

  83. Effect of local induction heat treatment on the induced residual stresses in the web region of a welded rail

    Article • The Journal of Strain Analysis for Engineering Design, April 2004, SAGE Publications

    Associate Professor Homayoun Hadavinia

  84. Cohesive zone models and the plastically deforming peel test

    Article • The Journal of Adhesion, March 2003, Taylor & Francis

    Associate Professor Homayoun Hadavinia

  85. The calculation of adhesive fracture energies in mode I: revisiting the tapered double cantilever beam (TDCB) test

    Article • Engineering Fracture Mechanics, January 2003, Elsevier

    Associate Professor Homayoun Hadavinia

  86. The prediction of crack growth in bonded joints under cyclic-fatigue loading II. Analytical and finite element studies

    Article • International Journal of Adhesion and Adhesives, January 2003, Elsevier

    Associate Professor Homayoun Hadavinia

  87. The prediction of crack growth in bonded joints under cyclic-fatigue loading I. Experimental studies

    Article • International Journal of Adhesion and Adhesives, January 2003, Elsevier

    Associate Professor Homayoun Hadavinia

  88. Article • International Journal of Fracture, January 2003, Springer Science + Business Media

    Associate Professor Homayoun Hadavinia

  89. Analytical solutions for cohesive zone models

    Article • Journal of the Mechanics and Physics of Solids, April 2002, Elsevier

    Associate Professor Homayoun Hadavinia

  90. C1-continuous generalised parabolic blending elements in the Boundary Element Method

    Article • Mathematical and Computer Modelling, April 2000, Elsevier

    Associate Professor Homayoun Hadavinia

  91. Article • International Journal of Fracture, January 2000, Springer Science + Business Media

    Associate Professor Homayoun Hadavinia

  92. The evolution of radial fingering in a Hele-Shaw cell using C1 continuous overhauser boundary element method

    Article • Engineering Analysis with Boundary Elements, January 1995, Elsevier

    Associate Professor Homayoun Hadavinia

  93. A cohesive zone global energy analysis of an impact loaded bi-material strip in shear

    Article • Springer Science + Business Media

    Associate Professor Homayoun Hadavinia

  94. Modelling of Elastic-Plastic Peel Tests for Structural Adhesives

    Article • Springer Science + Business Media

    Associate Professor Homayoun Hadavinia