All Stories

  1. Simulating Sediment Erosion in a Small Kaplan Turbine
  2. Aerodynamic Optimization of a Low-Speed Counterrotating Axial Fan Stage
  3. Predicting Erosion in a Counter-Rotating Fan under Different Operating Conditions
  4. Unsteady matching of a twin-entry radial turbine with a diesel engine
  5. Modeling and Simulation of Sand Particle Trajectories and Erosion in a Transonic Fan Stage
  6. A numerical study of volcanic ash ingestion and erosion of the front components of a high bypass turbofan engine
  7. Predicting Dust Erosion in a Counter-Rotating Fan
  8. Simulation of Sand Erosion in a Transonic Fan Stage
  9. Predicting Erosion Damage in a Centrifugal Fan
  10. Simulation of particle-laden flows and erosion in an axial fan stage considering the relative position of the blades
  11. Simulation of Rotor-Rotor Interaction and Noise of an Axial Counter-Rotating Fan
  12. A Comparative Study between Two Different Techniques of Solar Integrated Systems
  13. Optimum Operating Parameters and Blade Setting of a High-Speed Propeller
  14. Computation of erosion in a hydro turbine
  15. Investigation of steady and unsteady cavitating flows through a small Francis turbine
  16. Energy, exergy, and economic analysis of an integrated solar combined cycle power plant
  17. Flow unsteadiness and rotor-stator interaction in a two-stage axial turbine
  18. Hydrodynamic Characterization of Small-Size Kaplan Turbine
  19. Study of particle dynamics and erosion in a centrifugal fan
  20. Characterization of flow interactions in an axial fan stage
  21. Thermo-economic Assessment of the first Integrated Solar Combined Cycle System of Hassi R’mel
  22. Novel hybridization of solar central receiver system with combined cycle power plant
  23. This article investigates the steady and unsteady flows in a complete small Kaplan turbine
  24. Influence of Staggering and Interdistance on Performance of a Low-Speed Counterrotating Axial Fan
  25. Corrigendum to “Characterization of Flow Interactions in a One-Stage Shrouded Axial Turbine”
  26. Blade stacking and clocking effects in two-stage high-pressure axial turbine
  27. Assessment of some stall-onset criteria for centrifugal compressors
  28. Predicting unsteady behavior of a small francis turbine at several operating points
  29. Simulation and analysis of vane-blade interaction in a two-stage high-pressure axial turbine
  30. Improvement of the performance of an axial fan with counter-rotation
  31. Prediction of erosion in an axial turbine with initial position of blade
  32. Determination of the Performance of a Solar Tower Integrated with a Combined Cycle
  33. Characterization of Flow Interactions in a One-Stage Shrouded Axial Turbine
  34. Multi-Objective Optimization of Two-Stage Centrifugal Pump using NSGA-II Algorithm
  35. Unsteady behaviour of a twin entry radial turbine under engine like inlet flow conditions
  36. Unsteady heat transfer of exhaust valves
  37. Steam turbine injection generator performance estimation considering turbine blade cooling
  38. Characterization of component interactions in two-stage axial turbine
  39. Thermo-economic optimization of heat recovery steam generator for a range of gas turbine exhaust temperatures
  40. An approach for the thermal analysis of internal combustion engines’ exhaust valves
  41. Experimental and numerical investigations of internal heat transfer in an innovative trailing edge blade cooling system: stationary and rotation effects, part 2: numerical results
  42. Experimental and numerical investigations of internal heat transfer in an innovative trailing edge blade cooling system: stationary and rotation effects, part 1—experimental results
  43. Characterization of a Twin-Entry Radial Turbine under Pulsatile Flow Condition
  44. Modeling of Particle Trajectory and Erosion of Large Rotor Blades
  45. Simulations of Steady Cavitating Flow in a Small Francis Turbine
  46. Surrogate-Based Shape Optimization of Stall Margin and Efficiency of a Centrifugal Compressor
  47. Simulation of erosion by a particulate airflow through a ventilator
  48. Heat transfer investigation in new cooling schemes of a stationary blade trailing edge
  49. Experimental study of a cooling scheme for a turbine blade trailing edge
  50. Thermodynamic optimization of several (heat recovery steam generator) HRSG configurations for a range of exhaust gas temperatures
  51. Analyses of steady and unsteady flows in a turbocharger’s radial turbine
  52. Aerodynamic Characterization of a High Speed Propeller
  53. Cycle Optimization of Mixed High Bypass Turbofan
  54. Simulations of Steady and Unsteady Flows Through a Twin-Entry Radial Turbine
  55. Study of Particle Ingestion Through Two-Stage Gas Turbine
  56. Radial basis function-based shape optimization of centrifugal impeller using sequential sampling
  57. Nusselt Correlations in a Trailing Edge Cooling System with Long Pedestals and Ribs
  58. CFD analyses of the pulsatile flows in a twin-entry radial turbine
  59. A numerical optimization chain combining computational fluid dynamics and surrogate analysis for the aerodynamic design of airfoils
  60. Shape optimization of a centrifugal compressor impeller
  61. CFD analyses of a radial inflow turbine
  62. Analyses of radial compressor stability improvement by casing treatment
  63. Effects of Solid Particle Ingestion Through an HP Turbine
  64. Simulation of Particle Trajectories and Erosion in a Centrifugal Compressor
  65. Study of Sand Particle Trajectories and Erosion Into the First Compression Stage of a Turbofan
  66. Turboprop Cycle Optimization Using Particle Swarm Algorithm
  67. Analyses of impeller—vaneless-diffuser—scroll interactions in a radial compressor
  68. Optimizations of turboprop engines using the non-dominated sorting genetic algorithm
  69. Prediction of Erosion in Radial Turbine Components
  70. Optimization of Turbofan Propulsion Cycle Using a Genetic Algorithm
  71. Erosive Effects in Axial Turbomachinery
  72. Simulation of Particle Trajectories and Erosion Through a Centrifugal Compressor
  73. Study of Sand Particle Trajectories and Erosion Into the First Fan Stage of a Turbofan
  74. Minimum power requirement for a propeller-driven aircraft and optimum cycle parameters of turboprop engines
  75. Optimum Design of Turboprop Engines
  76. Analyses and Optimization of a Propulsion Cycle for Unmixed High Bypass Turbofan
  77. Computation of the Flow Field of Transonic Axial Compressor by Steady Arbitrary Lagrangian Eulerian Formulation
  78. Effects of Sand Ingestion Through an Axial Fan With Blade Staggering
  79. minimum thrust requirement for a given aircraft configuration.
  80. Prediction of an axial turbomachine performance degradation due to sand ingestion
  81. Experimental investigation of axial fan erosion and performance degradation
  82. Numerical Study of an Inlet Particle Separator
  83. Study of Erosion Effects on an Axial Fan Global Range of Operation
  84. Numerical Simulation of the Axial Fan Performance Degradation Due to Sand Ingestion
  85. Particles Trajectories Through an Axial Fan and Performance Degradation due to Sand Ingestion
  86. An Approximate Method for Jet Engines Flight Performances Prediction