All Stories

  1. Life cycle environmental impact assessment of the “Sindhuja-I” wave energy converter
  2. A novel microchannel-twisted pinfin hybrid heat sink for hotspot mitigation
  3. Airborne Transmission of SARS-CoV-2: The Contrast between Indoors and Outdoors
  4. Airborne Transmission of SARS-CoV-2: The Contrast between Indoors and Outdoors
  5. Analysis of an innovative compact point absorber wave energy converter concept suitable for small-scale power applications
  6. Capturing downstream wake of a marine current turbine by URANS and SST-IDDES
  7. Conceptual Design of a UVC-LED Air Purifier to Reduce Airborne Pathogen Transmission—A Feasibility Study
  8. Effect of blade leading-edge microcylinder in a Wells turbine used for wave energy converters
  9. Study of hydrodynamic forces acting on a heaving point absorber wave energy converter
  10. Design and analysis of a novel Bi-layer curved serpentine chaotic micromixer for efficient mixing
  11. Dynamic performance of a fluidic diode subjected to periodic flow
  12. Design Optimization of a Fluidic Diode for a Wave Energy Converter via Artificial Intelligence-Based Technique
  13. Optimization of Centrifugal Pump Impeller for Pumping Viscous Fluids Using Direct Design Optimization Technique
  14. A pareto optimal front of fluidic diode for a wave energy harnessing device
  15. Effect of fillets on a blade/vane of wave energy harvesting impulse turbine
  16. Numerical modelling and design of a small-scale wave-powered desalination system
  17. Design optimization of a marine current turbine having winglet on blade
  18. Wave energy harvesting impulse turbine having ring type blade: Experiments with unsteady flow
  19. Centrifugal pump performance enhancement: Effect of splitter blade and optimization
  20. Surrogate-based design optimization of a centrifugal pump impeller
  21. Surrogate based optimization of a Bi-Directional impulse turbine for OWC-WEC: Effect of guide vane lean and stagger angle for pseudo-sinusoidal wave conditions
  22. Radiused Edge Blade Tip for a Wider Operating Range in Wells Turbine
  23. Experimental Investigation of a Bidirectional Impulse Turbine for Oscillating Flows at Various Resistive Loads
  24. Numerical analysis of damping induced by impulse turbines for wave energy conversion
  25. Experimental Analysis of a Biplane Wells Turbine under Different Load Conditions
  26. Combined Casing Groove and Blade Tip Treatment for Wave Energy Harvesting Turbine
  27. Experimental Study of an Axial Turbine for Wave Energy Conversion
  28. Influence of stall fences on the performance of Wells turbine
  29. Effect of Guide Vane Fillets on Wave Energy Harvesting Impulse Turbine
  30. Hydrostructural Optimization of a Marine Current Turbine Through Multi-fidelity Numerical Models
  31. Performance enhancement of an impulse turbine for OWC using grouped grey wolf optimizer based controller
  32. Nature-inspired design of a turbine blade harnessing wave energy
  33. Optimization based higher order sliding mode controller for efficiency improvement of a wave energy converter
  34. Introducing Gurney flap to Wells turbine blade and performance analysis with OpenFOAM
  35. Performance enhancement of Wells turbine: Combined radiused edge blade tip, static extended trailing edge, and variable thickness modifications
  36. Computational and Experimental Study of Sand Entrapment in a Hydrocyclone During Desanding Operations in Oil Fields: Consequences for Leakage and Separation Efficiency
  37. On the optimal morphology and performance of a modeled dragonfly airfoil in gliding mode
  38. Optimization with Surrogate Models: Flow and Heat Transfer Applications
  39. A performance analysis of tidal turbine conversion system based on control strategies
  40. CFD-based analysis for finding critical wall roughness on centrifugal pump at design and off-design conditions
  41. Development of a reduced order wave to wire model of an OWC wave energy converter for control system analysis
  42. Control-Oriented Wave to Wire Model of Oscillating Water Column
  43. Hysteresis Behavior for Wave Energy Conversion Device Under Alternative Axial Flow Conditions
  44. Surrogate-Based Optimization of a Biplane Wells Turbine
  45. Multi-fidelity Optimization of Blade Thickness Parameters for a Horizontal Axis Tidal Stream Turbine
  46. The Effect of Midplane Guide Vanes in a Biplane Wells Turbine
  47. Experimental analysis of turbine-chamber coupling for wave energy conversion
  48. Performance Analysis of an Air Turbine for Ocean Energy Extraction Using CFD Technique
  49. High-performance ocean energy harvesting turbine design – Detailed flow analysis with blade leaning strategy
  50. Blood Flow and Mixing Analysis in Split-and-Recombine Micromixer With Offset Fluid Inlets
  51. Design Optimization of the Centrifugal Pumps via Low Fidelity Models
  52. Performance Analysis of Wells Turbine With Radiused Blade Tip
  53. High efficiency design of an impulse turbine used in oscillating water column to harvest wave energy
  54. Performance prediction of kinetic and screw pumps delivering slurry
  55. Wave energy conversion: Design and shape optimization
  56. Effect of Blade Profiles on the performance of Bidirectional Wave Energy Turbine
  57. Design and Analysis of a Marine Current Turbine
  58. Evaluation of Impulse Turbines for a Wave Energy Converter
  59. Surface Roughness Effect on Performance of an Electric Submersible Pump
  60. Shape optimization of a bidirectional impulse turbine via surrogate models
  61. Improved design of a Wells turbine for higher operating range
  62. Experimental and Numerical Investigation of the Performance of a Centrifugal Pump When Pumping Water and Light Crude Oil
  63. Combined effects of viscosity and surface roughness on electric submersible pump performance
  64. Optimal design of air turbines for oscillating water column wave energy systems: A review
  65. FILM-COOLING CHARACTERISTICS OF UPSTREAM RAMP ENHANCED TURBINE BLADE SURFACE COOLING
  66. Numerical optimization of Wells turbine for wave energy extraction
  67. Effects of crude oil-water emulsions at various water-cut on the performance of the centrifugal pump
  68. Leakage flow correlation of a progressive cavity pump delivering shear thinning non-Newtonian fluids
  69. Torque and efficiency maximization for a wave energy harvesting turbine: an approach to modify multiple design variables
  70. Optimal Wells turbine speeds at different wave conditions
  71. Marine Energy Turbine Performance: Effect of Blade Sweep
  72. Performance prediction of a centrifugal pump delivering non-Newtonian slurry
  73. Numerical Analysis of Fluid Flow Through an Electrical Submersible Pump for Handling Viscous Liquid
  74. Modeling and controller implementation of tidal turbine for Indian remote islands
  75. Surface wave effect on marine current turbine, modelling and analysis
  76. Optimization of a Centrifugal Pump Impeller by Controlling Blade Profile Parameters
  77. Micro-jet Impingement Spent Flow Management
  78. Flow analysis of airfoil having different cavities on its suction surface
  79. Application of computational fluid dynamics and surrogate-coupled evolutionary computing to enhance centrifugal-pump performance
  80. Optimal designs of an ESP to handle upto 10% GVF
  81. Spent Flow Effects of Multiple Micro-Jet Impingement Cooling Models
  82. Pumping crude oil by centrifugal impeller having different blade angles and surface roughness
  83. Multi-objective optimization of a bidirectional impulse turbine
  84. High performance ocean energy harvesting turbine design–A new casing treatment scheme
  85. A comparative study of kriging variants for the optimization of a turbomachinery system
  86. Multiple surrogate based optimization of a bidirectional impulse turbine for wave energy conversion
  87. Wave Energy Harvesting Turbine: Performance Enhancement
  88. Casing Treatment of a Wave Energy Extracting Turbine
  89. Performance Enhancement of an Electric Submersible Pump
  90. Effect of Guide Vane Angle on Wells Turbine Performance
  91. Effectiveness of meta-models for multi-objective optimization of centrifugal impeller
  92. Numerical Analysis of Flare Gas Recovery Ejector
  93. Efficiency Enhancement of Bidirectional Impulse Turbine Using Artificial Neural Network
  94. Improvement of Efficiency by Design Optimization of a Centrifugal Pump Impeller
  95. Performance analysis of an ejector for flare gas recovery
  96. Oscillating water column wave energy system — A prospective
  97. Surrogate Assisted Design Optimization of an Air Turbine
  98. Exit Blade Angle and Roughness Effect on Centrifugal Pump Performance
  99. Review of air turbines for wave energy conversion
  100. Vortex Trapping by Different Cavities on an Airfoil
  101. Enhancement of Film Cooling Effectiveness Using Upstream Ramp
  102. Swirl Induced Flow Through a Venturi-Ejector
  103. Shape Optimization of a Dimpled Channel to Enhance Heat Transfer Using a Weighted-Average Surrogate Model
  104. Optimum design of a channel roughened by dimples to improve cooling performance
  105. Gas Interference in Sucker Rod Pump
  106. Design optimization of low-speed axial flow fan blade with three-dimensional RANS analysis
  107. Shape optimization of an axial compressor blade by multi-objective genetic algorithm
  108. Multi-objective optimization of a dimpled channel for heat transfer augmentation
  109. Multi-objective optimization of an axial compressor blade
  110. 가중평균대리모델을 사용한 천음속 압축기 블레이드 최적화
  111. Multiple Surrogate Modeling for Axial Compressor Blade Shape Optimization
  112. Optimization of Stacking Line and Blade Profile for Design of Axial Flow Fan Blade
  113. Stacking and Thickness Optimization of a Compressor Blade Using Weighted Average Surrogate Model
  114. Optimization of a Channel Roughened by Dimples on Opposite Surfaces for Heat Transfer Enhancement
  115. Surrogate Modeling for Optimization of Dimpled Channel to Enhance Heat Transfer Performance
  116. Multi Objective Optimization of a Turbomachinery Blade Using NSGA-II
  117. Optimal Design of Swept, Leaned and Skewed Blades in a Transonic Axial Compressor
  118. Shape Optimization of Turbomachinery Blade Using Multiple Surrogate Models