All Stories

  1. Surface and volumetric elasticity characterisation of hydraulic lime mortar prisms under compression

    Article • Construction and Building Materials, September 2026, Elsevier

    Dr Francois Hild, Prof Thomas J Marrow

  2. Quantifying Brittle Crack Opening in Human Trabecular Bone Using Synchrotron XCT–DVC

    Article • Biomechanics, July 2026, MDPI AG

    Prof Thomas J Marrow

  3. Acoustic emission and in-situ synchrotron X-ray computed tomography for the investigation of tensile failures in fibrous plaster

    Article • Composites Part B Engineering, June 2026, Elsevier

    Prof Thomas J Marrow

  4. Effect of densification on dimensional stability and water absorption behavior of pine

    Article • Journal of Cleaner Production, April 2026, Elsevier

    Prof Thomas J Marrow

  5. Measurement of cleavage toughness of brittle materials by local elastic field analysis

    Article • Acta Materialia, January 2026, Elsevier

    Prof Thomas J Marrow

  6. Computation of displacements from strain fields: Derivation, validation, and application

    Article • Acta Materialia, January 2026, Elsevier

    Prof Thomas J Marrow

  7. Surface and volumetric elasticity characterisation of hydraulic lime mortar prisms under compression

    Article • January 2026, Elsevier

    Dr Francois Hild, Prof Thomas J Marrow

  8. Mixed-mode J-integral evaluation from incomplete two-dimensional DIC displacement fields near crack faces

    Article • January 2026, Elsevier

    Prof Thomas J Marrow

  9. Giga‐Voxel Multiscale Composite Architecture Mirrored Through a Data‐to‐Model Closed‐Loop Digital Twin

    Article • Advanced Materials, November 2025, Wiley

    Prof Thomas J Marrow

  10. High plating currents without dendrites at the interface between a lithium anode and solid electrolyte

    Article • Nature Energy, September 2025, Springer Science + Business Media

    Prof Thomas J Marrow

  11. Inelastic and fracture behaviour of nuclear graphite

    Article • International Journal of Mechanical Sciences, June 2025, Elsevier

    Prof Thomas J Marrow

  12. On the crack resistance and damage tolerance of 3D-printed nature-inspired hierarchical composite architecture

    Article • Nature Communications, November 2024, Springer Science + Business Media

    Prof Thomas J Marrow

  13. Experimental investigation on mode-I fracture properties of magnesium-based wood-like material using DIC technique

    Article • Journal of Building Engineering, September 2024, Elsevier

    Prof Thomas J Marrow

  14. On the crack resistance and damage tolerance of 3D-printed nature-inspired hierarchical composite architecture

    Article • May 2024, Research Square

    Prof Thomas J Marrow

  15. Influence of contouring the lithium metal/solid electrolyte interface on the critical current for dendrites

    Article • Energy & Environmental Science, January 2024, Royal Society of Chemistry

    Prof Thomas J Marrow

  16. Piecewise damage model for SiC/SiC composites with multilevel experimental validation

    Article • Composites Part A Applied Science and Manufacturing, December 2023, Elsevier

    Prof Thomas J Marrow

  17. Fracture toughness evaluation of a nuclear graphite with non-linear elastic properties by 3D imaging and inverse finite element analysis

    Article • Engineering Fracture Mechanics, December 2023, Elsevier

    Prof Thomas J Marrow

  18. In situ observation of crystal reorientation in polygranular graphite by synchrotron X-ray diffraction and neutron imaging

    Article • Carbon, October 2023, Elsevier

    Prof Thomas J Marrow

  19. HR-EBSD analysis of in situ stable crack growth at the micron scale

    Article • Journal of the Mechanics and Physics of Solids, December 2022, Elsevier

    Prof Thomas J Marrow

  20. In situ observation of compressive deformation of an interconnected network of zinc oxide tetrapods

    Article • Scripta Materialia, November 2022, Elsevier

    Prof Thomas J Marrow

  21. Hoop Strain Measurement During a SiC/SiC Ceramic Composite Tube Burst Test by Digital Volume Correlation of X-Ray Computed Tomographs

    Article • Experimental Mechanics, October 2022, Springer Science + Business Media

    Prof Thomas J Marrow

  22. Effect of irradiation swelling on the mechanical properties of unidirectional SiC/SiC composites: A numerical investigation at microstructural level

    Article • Journal of Nuclear Materials, October 2022, Elsevier

    Prof Thomas J Marrow

  23. In situ characterisation of the strain fields of intragranular slip bands in ferrite by high-resolution electron backscatter diffraction

    Article • Acta Materialia, October 2022, Elsevier

    Prof Thomas J Marrow

  24. High temperature spherical nano-indentation of graphite crystals

    Article • Carbon, May 2022, Elsevier

    Prof Thomas J Marrow, Ivo Šulák

  25. Combined evaluation of Young modulus and fracture toughness in small specimens of fine grained nuclear graphite using 3D image analysis

    Article • Journal of Nuclear Materials, March 2022, Elsevier

    Prof Thomas J Marrow

  26. Ex-situ micro X-ray computed tomography tests and image-based simulation of UHPFRC beams under bending

    Article • Cement and Concrete Composites, October 2021, Elsevier

    Prof Thomas J Marrow

  27. J-Integral Analysis of the Elastic Strain Fields of Ferrite Deformation Twins using Electron Backscatter Diffraction

    Article • Acta Materialia, August 2021, Elsevier

    Prof Thomas J Marrow

  28. In situ investigation of failure in 3D braided SiCf/SiC composites under flexural loading

    Article • Composite Structures, August 2021, Elsevier

    Prof Thomas J Marrow

  29. FFT phase-field model combined with cohesive composite voxels for fracture of composite materials with interfaces

    Article • Computational Mechanics, June 2021, Springer Science + Business Media

    Prof Thomas J Marrow

  30. A NEA review on innovative structural materials solutions, including advanced manufacturing processes for nuclear applications based on technology readiness assessment

    Article • Nuclear Materials and Energy, June 2021, Elsevier

    Prof Thomas J Marrow

  31. In situ X-ray tomography characterisation of 3D deformation of C/C-SiC composites loaded under tension

    Article • Composites Part A Applied Science and Manufacturing, June 2021, Elsevier

    Prof Thomas J Marrow

  32. Special Issue on Advances in understanding and modelling the micromechanisms of fracture and fatigue

    Article • Theoretical and Applied Fracture Mechanics, June 2021, Elsevier

    Prof Thomas J Marrow

  33. Temperature Dependence of Lithium Anode Voiding in Argyrodite Solid-State Batteries

    Article • ACS Applied Materials & Interfaces, May 2021, American Chemical Society (ACS)

    Prof Thomas J Marrow

  34. The infiltration behavior and chemical compatibility of molten lead-bismuth eutectic in nuclear graphite at elevated temperature

    Article • Journal of Nuclear Materials, March 2021, Elsevier

    Prof Thomas J Marrow

  35. Imaging Sodium Dendrite Growth in All‐Solid‐State Sodium Batteries Using 23 Na T 2 ‐Weighted Magnetic Resonance Imaging

    Article • Angewandte Chemie, November 2020, Wiley

    Prof Thomas J Marrow

  36. Imaging Sodium Dendrite Growth in All‐Solid‐State Sodium Batteries Using 23 Na T 2 ‐Weighted Magnetic Resonance Imaging

    Article • Angewandte Chemie, November 2020, Wiley

    Prof Thomas J Marrow

  37. In-situ X-ray tomography of wear – A feasibility study

    Article • Tribology International, October 2020, Elsevier

    Prof Thomas J Marrow

  38. Measuring the brittle-to-ductile transition temperature of tungsten–tantalum alloy using chevron-notched micro-cantilevers

    Article • Scripta Materialia, April 2020, Elsevier

    Prof Thomas J Marrow

  39. Analysis of Interfacial Effects in All-Solid-State Batteries with Thiophosphate Solid Electrolytes

    Article • ACS Applied Materials & Interfaces, February 2020, American Chemical Society (ACS)

    Prof Thomas J Marrow

  40. Characterisation of slip and twin activity using digital image correlation and crystal plasticity finite element simulation: Application to orthorhombic α-uranium

    Article • Journal of the Mechanics and Physics of Solids, February 2020, Elsevier

    Prof Thomas J Marrow

  41. A 3D full‐field study of cracks in a nuclear graphite under mode I and mode II cyclic dwell loading conditions

    Article • Fatigue & Fracture of Engineering Materials & Structures, December 2019, Wiley

    Prof Thomas J Marrow

  42. Sodium/Na β″ Alumina Interface: Effect of Pressure on Voids

    Article • ACS Applied Materials & Interfaces, December 2019, American Chemical Society (ACS)

    Prof Thomas J Marrow

  43. Structure and flexural properties of 3D needled carbon fiber reinforced carbon and silicon carbide (C/C-SiC) composites fabricated by gaseous and liquid silicon infiltration

    Article • Ceramics International, October 2019, Elsevier

    Prof Thomas J Marrow

  44. Validating 3D two-parameter fracture mechanics models for structural integrity assessments

    Article • Theoretical and Applied Fracture Mechanics, October 2019, Elsevier

    Prof Thomas J Marrow

  45. Fatigue crack closure: A myth or a misconception?

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2019, Wiley

    Prof Thomas J Marrow

  46. Critical stripping current leads to dendrite formation on plating in lithium anode solid electrolyte cells

    Article • Nature Materials, July 2019, Springer Science + Business Media

    Prof Thomas J Marrow

  47. Evaluation of Fracture Toughness Measurements Using Chevron-Notched Silicon and Tungsten Microcantilevers

    Article • JOM, July 2019, Springer Science + Business Media

    Prof Thomas J Marrow

  48. Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures

    Article • Applied Composite Materials, June 2019, Springer Science + Business Media

    Prof Thomas J Marrow

  49. Computed tomography porosity and spherical indentation for determining cortical bone millimetre-scale mechanical properties

    Article • Scientific Reports, May 2019, Springer Science + Business Media

    Prof Thomas J Marrow

  50. Application of Neutron Imaging to Detect and Quantify Fatigue Cracking

    Article • International Journal of Mechanical Sciences, May 2019, Elsevier

    Prof Thomas J Marrow

  51. Damage development during flexural loading of a 5-directional braided C/C-SiC composite, characterized by X-ray tomography and digital volume correlation

    Article • Ceramics International, April 2019, Elsevier

    Prof Thomas J Marrow

  52. Hygrothermal aging and structural damage of a jute/poly (lactic acid) (PLA) composite observed by X-ray tomography

    Article • Composites Science and Technology, March 2019, Elsevier

    Prof Thomas J Marrow

  53. In situ observation of compression damage in a 3D needled-punched carbon fiber-silicon carbide ceramic matrix composite

    Article • Composite Structures, February 2019, Elsevier

    Prof Thomas J Marrow

  54. Lattice strain and texture development in coarse-grained uranium – a neutron diffraction study

    Article • Journal of Physics Conference Series, October 2018, Institute of Physics Publishing

    Prof Thomas J Marrow

  55. In situ mapping of normal strains in the field of a growing fatigue crack in a steel weld using digital image correlation and energy dispersive synchrotron X-ray diffraction

    Article • International Journal of Fatigue, October 2018, Elsevier

    Prof Thomas J Marrow

  56. Data related to the mesoscopic structure of iso-graphite for nuclear applications

    Article • Data in Brief, August 2018, Elsevier

    Prof Thomas J Marrow

  57. In situ Observation of Compression Damage in a Three-Dimensional Braided Carbon Fiber Reinforced Carbon and Silicon Carbide (C/C-SiC) Ceramic Composite

    Article • Microscopy and Microanalysis, June 2018, Oxford University Press (OUP)

    Prof Thomas J Marrow

  58. Mesoscopic structure features in synthetic graphite

    Article • Materials & Design, March 2018, Elsevier

    Prof Thomas J Marrow, Professor roger smith

  59. Validating 3D two-parameter fracture mechanics for structural integrity assessments

    Article • Procedia Structural Integrity, January 2018, Elsevier

    Prof Thomas J Marrow

  60. 3D Cellular Automata fracture model for porous graphite microstructures

    Article • Nuclear Engineering and Design, November 2017, Elsevier

    Prof Thomas J Marrow

  61. Observation of crack growth in a polycrystalline ferroelectric by synchrotron X-ray diffraction

    Article • Scripta Materialia, November 2017, Elsevier

    Prof Thomas J Marrow

  62. Synchrotron X-ray characterization of crack strain fields in polygranular graphite

    Article • Carbon, November 2017, Elsevier

    Prof Thomas J Marrow

  63. An autonomous surface discontinuity detection and quantification method by digital image correlation and phase congruency

    Article • Optics and Lasers in Engineering, September 2017, Elsevier

    Prof Thomas J Marrow

  64. A multi-scale three-dimensional Cellular Automata fracture model of radiolytically oxidised nuclear graphite

    Article • Carbon, June 2017, Elsevier

    Prof Thomas J Marrow

  65. J-Integral Calculation by Finite Element Processing of Measured Full-Field Surface Displacements

    Article • Experimental Mechanics, April 2017, Springer Science + Business Media

    Prof Thomas J Marrow

  66. In-situ X-ray computed tomography characterisation of 3D fracture evolution and image-based numerical homogenisation of concrete

    Article • Cement and Concrete Composites, January 2017, Elsevier

    Prof Thomas J Marrow

  67. In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite

    Article • Journal of Nuclear Materials, December 2016, Elsevier

    Prof Thomas J Marrow

  68. Three-dimensional measurement and cohesive element modelling of deformation and damage in a 2.5-dimensional woven ceramic matrix composite

    Article • Fatigue & Fracture of Engineering Materials & Structures, October 2016, Wiley

    Prof Thomas J Marrow

  69. Quantifying yield behaviour in metals by X-ray nanotomography

    Article • Scientific Reports, October 2016, Nature

    Prof Thomas J Marrow

  70. Multifractal-based assessment of Gilsocarbon graphite microstructures

    Article • Carbon, August 2016, Elsevier

    Prof Thomas J Marrow

  71. Computer modelling of damage in ceramic composites

    Article • Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences, May 2016, Royal Society Publishing

    Prof Thomas J Marrow

  72. Effect of surface machining on intergranular stress corrosion cracking (IGSCC) in sensitised type 304 austenitic stainless steel

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, May 2016, Taylor & Francis

    Prof Thomas J Marrow

  73. Multi-scale modelling of nuclear graphite tensile strength using the site-bond lattice model

    Article • Carbon, April 2016, Elsevier

    Prof Thomas J Marrow

  74. Three-dimensional displacement mapping of diffused Pt thermal barrier coatings via synchrotron X-ray computed tomography and digital volume correlation

    Article • Scripta Materialia, April 2016, Elsevier

    Prof Thomas J Marrow

  75. Porosity characterization of fiber-reinforced ceramic matrix composite using synchrotron X-ray computed tomography

    Article • Journal of Instrumentation, March 2016, Institute of Physics Publishing

    Prof Thomas J Marrow

  76. Observation and simulation of indentation damage in a SiC–SiCfibre ceramic matrix composite

    Article • Finite Elements in Analysis and Design, March 2016, Elsevier

    Prof Thomas J Marrow

  77. Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy

    Article • Acta Materialia, February 2016, Elsevier

    Prof Thomas J Marrow

  78. In situ measurement of the strains within a mechanically loaded polygranular graphite

    Article • Carbon, January 2016, Elsevier

    Prof Thomas J Marrow

  79. Obtaining the J-integral by diffraction-based crack-field strain mapping

    Article • Procedia Structural Integrity, January 2016, Elsevier

    Thorsten Becker, Prof Thomas J Marrow

  80. Plasma-sprayed thermal barrier coatings: numerical study on damage localization and evolution

    Article • Fracture and Structural Integrity, December 2015, Gruppo Italiano Frattura

    Prof Thomas J Marrow

  81. Method for the explicit insertion of microstructure in Cellular Automata Finite Element (CAFE) models based on an irregular tetrahedral Finite Element mesh: Application in a multi-scale Finite Element Microstructure MEshfree framework (FEMME)

    Article • Finite Elements in Analysis and Design, November 2015, Elsevier

    Prof Thomas J Marrow

  82. FEMME: A multi-scale Finite Element Microstructure MEshfree fracture model for quasi-brittle materials with complex microstructures

    Article • Engineering Fracture Mechanics, October 2015, Elsevier

    Prof Thomas J Marrow

  83. Multi-scale modeling of damage development in a thermal barrier coating

    Article • Surface and Coatings Technology, August 2015, Elsevier

    Prof Thomas J Marrow

  84. Time-resolved synchrotron tomographic quantification of deformation-induced flow in a semi-solid equiaxed dendritic Al–Cu alloy

    Article • Scripta Materialia, July 2015, Elsevier

    Prof Thomas J Marrow

  85. Synchrotron X-ray Tomographic Quantification of Deformation Induced Strain Localisation in Semi-solid Al- 15wt.%Cu

    Article • IOP Conference Series Materials Science and Engineering, June 2015, Institute of Physics Publishing

    Prof Thomas J Marrow

  86. Influence of milling on the development of stress corrosion cracks in austenitic stainless steel

    Article • Journal of Materials Processing Technology, April 2015, Elsevier

    Prof Thomas J Marrow

  87. Advanced 2D and 3D Digital Image Correlation of the Full-Field Displacements of Cracks and Defects

    Article • January 2015, ASTM International

    Prof Thomas J Marrow

  88. Yield behavior beneath hardness indentations in ductile metals, measured by three-dimensional computed X-ray tomography and digital volume correlation

    Article • Acta Materialia, January 2015, Elsevier

    Prof Thomas J Marrow

  89. A high-energy neutron source for fusion applications

    Article • Fusion Engineering and Design, October 2014, Elsevier

    Professor Paul M Mummery, Prof Thomas J Marrow

  90. In situ quantitative three-dimensional characterisation of sub-indentation cracking in polycrystalline alumina

    Article • Journal of the European Ceramic Society, October 2014, Elsevier

    Prof Thomas J Marrow

  91. In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al–Cu alloy

    Article • Acta Materialia, September 2014, Elsevier

    Prof Thomas J Marrow

  92. A quantitative three-dimensional in situ study of a short fatigue crack in a magnesium alloy

    Article • International Journal of Fatigue, September 2014, Elsevier

    Prof Thomas J Marrow

  93. Grain boundary structure and intergranular stress corrosion crack initiation in high temperature water of a thermally sensitised austenitic stainless steel, observed in situ

    Article • Corrosion Science, August 2014, Elsevier

    Prof Thomas J Marrow

  94. RICH TOMOGRAPHY TECHNIQUES FOR THE ANALYSIS OF MICROSTRUCTURE AND DEFORMATION

    Article • International Journal of Computational Methods, June 2014, World Scientific Pub Co Pte Lt

    Prof Thomas J Marrow

  95. Reducing risk and accelerating delivery of a neutron source for fusion materials research

    Article • Fusion Engineering and Design, April 2014, Elsevier

    Prof Thomas J Marrow

  96. Studying SiC/SiC Composites by X-Ray Tomography

    Article • Key Engineering Materials, March 2014, Trans Tech Publications

    Professor Paul M Mummery, Prof Thomas J Marrow

  97. 3D Cellular Automata Finite Element Method with Explicit Microstructure: Modeling Quasi-brittle Fracture using Meshfree Damage Propagation

    Article • Procedia Materials Science, January 2014, Elsevier

    Prof Thomas J Marrow

  98. 3D Studies of Damage by Combined X-ray Tomography and Digital Volume Correlation

    Article • Procedia Materials Science, January 2014, Elsevier

    Prof Thomas J Marrow

  99. Three-dimensional observation and image-based modelling of thermal strains in polycrystalline alumina

    Article • Acta Materialia, December 2013, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  100. 3D Studies of Indentation by Combined X-Ray Tomography and Digital Volume Correlation

    Article • Key Engineering Materials, November 2013, Trans Tech Publications

    Prof Thomas J Marrow

  101. Fracture Characterisation of Reactor Core Graphite under Biaxial Loading

    Article • Key Engineering Materials, September 2013, Trans Tech Publications

    Prof Thomas J Marrow

  102. Three-dimensional crack observation, quantification and simulation in a quasi-brittle material

    Article • Acta Materialia, September 2013, Elsevier

    Prof Thomas J Marrow

  103. Observation and quantification of three-dimensional crack propagation in poly-granular graphite

    Article • Engineering Fracture Mechanics, September 2013, Elsevier

    Prof Thomas J Marrow

  104. Editorial

    Article • Engineering Fracture Mechanics, September 2013, Elsevier

    Prof Thomas J Marrow

  105. Flexural strength and defect behaviour of polygranular graphite under different states of stress

    Article • Carbon, August 2013, Elsevier

    Prof Thomas J Marrow

  106. Application of accelerator based neutron sources in fusion materials research

    Article • June 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Thomas J Marrow

  107. In situ observation of short fatigue crack propagation in oxygenated water at elevated temperature and pressure

    Article • Corrosion Science, March 2013, Elsevier

    Prof Thomas J Marrow

  108. Annealing of ion irradiation damage in nuclear graphite

    Article • Journal of Nuclear Materials, March 2013, Elsevier

    Prof Thomas J Marrow

  109. Fracture behaviour of an anisotropic polygranular graphite (PGA)

    Article • Materials Science and Engineering A, December 2012, Elsevier

    Prof Thomas J Marrow

  110. Intergranular crack nuclei in polycrystalline alumina

    Article • Engineering Fracture Mechanics, November 2012, Elsevier

    Prof Thomas J Marrow

  111. Application of an independent parallel reactions model on the annealing kinetics of BEPO irradiated graphite

    Article • Journal of Nuclear Materials, August 2012, Elsevier

    Prof Thomas J Marrow

  112. An approach to calculate theJ-integral by digital image correlation displacement field measurement

    Article • Fatigue & Fracture of Engineering Materials & Structures, April 2012, Wiley

    Prof Thomas J Marrow, Thorsten Becker

  113. Quantitative in situ study of short crack propagation in polygranular graphite by digital image correlation

    Article • Fatigue & Fracture of Engineering Materials & Structures, April 2012, Wiley

    Prof Thomas J Marrow

  114. A new approach for DL-EPR testing of thermo-mechanically processed austenitic stainless steel

    Article • Corrosion Science, December 2011, Elsevier

    Prof Thomas J Marrow

  115. Three-dimensional in situ observations of short fatigue crack growth in magnesium

    Article • Acta Materialia, October 2011, Elsevier

    Prof Thomas J Marrow

  116. Effects of orientation, stress and exposure time on short intergranular stress corrosion crack behaviour in sensitised type 304 austenitic stainless steel

    Article • Fatigue & Fracture of Engineering Materials & Structures, September 2011, Wiley

    Prof Thomas J Marrow

  117. Detection and characterisation of intergranular stress-corrosion cracking on austenitic stainless steel

    Article • Werkstoffe und Korrosion, July 2011, Wiley

    Prof Thomas J Marrow

  118. Damage, crack growth and fracture characteristics of nuclear grade graphite using the Double Torsion technique

    Article • Journal of Nuclear Materials, July 2011, Elsevier

    Prof Thomas J Marrow, Thorsten Becker

  119. A method for the 3-D quantification of bridging ligaments during crack propagation

    Article • Scripta Materialia, July 2011, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  120. In situ observation of crack nuclei in poly-granular graphite under ring-on-ring equi-biaxial and flexural loading

    Article • Engineering Fracture Mechanics, May 2011, Elsevier

    Prof Thomas J Marrow

  121. An Evaluation of the Double Torsion Technique

    Article • Experimental Mechanics, February 2011, Springer Science + Business Media

    Prof Thomas J Marrow, Thorsten Becker

  122. Influence of Twins on Short Fatigue Cracks in Type 316L Stainless Steel

    Article • Key Engineering Materials, January 2011, Trans Tech Publications

    Prof Thomas J Marrow

  123. In-Situ Observation and Modelling of Intergranular Cracking in Polycrystalline Alumina

    Article • Key Engineering Materials, January 2011, Trans Tech Publications

    Prof Thomas J Marrow, Professor Philip J Withers

  124. Diffraction contrast tomography for the study of polycrystalline stainless steel microstructures and stress corrosion cracking

    Article • Revue de Métallurgie, January 2011, EDP Sciences

    Prof Thomas J Marrow

  125. 3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography

    Article • Acta Materialia, January 2011, Elsevier

    Prof Thomas J Marrow

  126. Characterization of polycrystalline materials using synchrotron X-ray imaging and diffraction techniques

    Article • JOM, December 2010, Springer Science + Business Media

    Prof Thomas J Marrow

  127. Nanotomography for understanding materials degradation

    Article • Scripta Materialia, October 2010, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  128. Fracture behaviour of radiolytically oxidised reactor core graphites: a view

    Article • Materials Science and Technology, August 2010, Taylor & Francis

    Prof Thomas J Marrow

  129. 3D inspection of fabrication and degradation processes from X-ray (micro) tomography images using a hole closing algorithm

    Article • July 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Thomas J Marrow, Professor Philip J Withers

  130. A Consideration of the Effect of Radiolytic Oxidation on Fracture Behaviour of Reactor Core Graphites

    Article • June 2010, Royal Society of Chemistry

    Prof Thomas J Marrow

  131. The Location of Radioisotopes in British Experimental Pile Grade Zero Graphite Waste

    Article • June 2010, Royal Society of Chemistry

    Prof Thomas J Marrow

  132. Characterisation of grain boundary cluster compactness in austenitic stainless steel

    Article • Materials Science and Technology, June 2010, Taylor & Francis

    Prof Thomas J Marrow

  133. Correlations of electrochemical noise, acoustic emission and complementary monitoring techniques during intergranular stress-corrosion cracking of austenitic stainless steel

    Article • Corrosion Science, June 2010, Elsevier

    Prof Thomas J Marrow

  134. Grain Tracking at the High Energy Materials Science Beamline of the Petra III Synchrotron Radiation Source

    Article • Materials Science Forum, May 2010, Trans Tech Publications

    Prof Thomas J Marrow

  135. Non-destructive analysis of micro texture and grain boundary character from X-ray diffraction contrast tomography

    Article • Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms, February 2010, Elsevier

    Prof Thomas J Marrow

  136. Towards Understanding the Development of Grain Boundary Clusters in Austenitic Stainless Steel

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Prof Thomas J Marrow

  137. Preliminary Evaluation of Digital Image Correlation for In-situ Observation of Low Temperature Atmospheric-Induced Chloride Stress Corrosion Cracking in Austenitic Stainless Steels

    Article • January 2010, The Electrochemical Society

    Prof Thomas J Marrow

  138. Mechanical Properties and Fracture of Materials

    Article • January 2010, Elsevier

    Prof Thomas J Marrow

  139. New opportunities for 3D materials science of polycrystalline materials at the micrometre lengthscale by combined use of X-ray diffraction and X-ray imaging

    Article • Materials Science and Engineering A, October 2009, Elsevier

    Prof Thomas J Marrow

  140. Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis

    Article • Review of Scientific Instruments, March 2009, American Institute of Physics

    Prof Thomas J Marrow

  141. In situobservation of intergranular crack nucleation in a grain boundary controlled austenitic stainless steel

    Article • Journal of Microscopy, March 2009, Wiley

    Prof Thomas J Marrow

  142. Five-parameter grain boundary analysis of a grain boundary-engineered austenitic stainless steel

    Article • Journal of Microscopy, March 2009, Wiley

    Prof Thomas J Marrow

  143. Towards Modelling Intergranular Stress-Corrosion Cracks Using Experimentally Obtained Grain Topologies

    Article • January 2009, ASME International

    Prof Thomas J Marrow

  144. Microstructural scale strain localisation in nuclear graphite

    Article • Journal of Nuclear Materials, October 2008, Elsevier

    Prof Thomas J Marrow

  145. Microstructural modelling of nuclear graphite using multi-phase models

    Article • Journal of Nuclear Materials, October 2008, Elsevier

    Prof Thomas J Marrow

  146. Microstructural characterisation of nuclear grade graphite

    Article • Journal of Nuclear Materials, October 2008, Elsevier

    Prof Thomas J Marrow

  147. Microcracks in nuclear graphite and highly oriented pyrolytic graphite (HOPG)

    Article • Journal of Nuclear Materials, October 2008, Elsevier

    Prof Thomas J Marrow

  148. Failure analysis of the effects of porosity in thermally oxidised nuclear graphite using finite element modelling

    Article • Journal of Nuclear Materials, October 2008, Elsevier

    Prof Thomas J Marrow

  149. Characterization of heterogeneity and nonlinearity in material properties of nuclear graphite using an inverse method

    Article • Journal of Nuclear Materials, October 2008, Elsevier

    Prof Thomas J Marrow

  150. Application of an independent parallel reactions model on the annealing kinetics to irradiated graphite waste

    Article • Journal of Nuclear Materials, October 2008, Elsevier

    Prof Thomas J Marrow

  151. Three-dimensional characterization and thermal property modelling of thermally oxidized nuclear graphite

    Article • Acta Materialia, September 2008, Elsevier

    Prof Thomas J Marrow

  152. Effect of thermomechanical process history on grain boundary control in an austenitic stainless steel

    Article • Scripta Materialia, September 2008, Elsevier

    Prof Thomas J Marrow

  153. Observation of microstructure deformation and damage in nuclear graphite

    Article • Engineering Fracture Mechanics, August 2008, Elsevier

    Prof Thomas J Marrow

  154. Nanostructures of carbon in nuclear graphite

    Article • Journal of Physics Conference Series, August 2008, Institute of Physics Publishing

    Prof Thomas J Marrow

  155. Observations of Intergranular Stress Corrosion Cracking in a Grain-Mapped Polycrystal

    Article • Science, July 2008, American Association for the Advancement of Science

    Prof Thomas J Marrow

  156. Preparation of fatigue specimens with controlled surface characteristics

    Article • Journal of Materials Processing Technology, July 2008, Elsevier

    Prof Thomas J Marrow

  157. Modelling the effects of surface finish on fatigue limit in austenitic stainless steels

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2008, Wiley

    Prof Thomas J Marrow

  158. The influence of low-strain thermo-mechanical processing on grain boundary network characteristics in type 304 austenitic stainless steel

    Article • Journal of Microscopy, June 2008, Wiley

    Prof Thomas J Marrow

  159. X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. II. The combined case

    Article • Journal of Applied Crystallography, March 2008, International Union of Crystallography

    Professor Marcelo Goncalves Hönnicke, Prof Thomas J Marrow

  160. Analysis of crack propagation in nuclear graphite using three-point bending of sandwiched specimens

    Article • Journal of Nuclear Materials, January 2008, Elsevier

    Professor Paul M Mummery, Prof Thomas J Marrow

  161. The microstructure of nuclear graphite binders

    Article • Carbon, January 2008, Elsevier

    Prof Thomas J Marrow

  162. Mesoscale Mechanical Model for Intergranular Stress Corrosion Cracking and Implications for Microstructure Engineering

    Article • Journal of Pressure Vessel Technology, January 2008, ASME International

    Prof Thomas J Marrow

  163. In-Situ Observations of Intergranular Stress Corrosion Cracking

    Article • January 2008, ASME International

    Prof Thomas J Marrow

  164. In-Situ Observation of Crack Nucleation in Nuclear Graphite by Digital Image Correlation

    Article • January 2008, ASME International

    Prof Thomas J Marrow

  165. High-resolution, in-situ, tomographic observations of stress corrosion cracking

    Article • January 2008, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  166. Grain boundary engineering for crack bridging

    Article • January 2008, Elsevier

    Prof Thomas J Marrow

  167. Surface grain boundary engineering of shot-peened type 304 stainless steel

    Article • Journal of Materials Science, December 2007, Springer Science + Business Media

    Prof Thomas J Marrow

  168. Rates of intergranular environment assisted cracking in three-dimensional model microstructures

    Article • Theoretical and Applied Fracture Mechanics, December 2007, Elsevier

    Prof Thomas J Marrow

  169. Modelling Intergranular Stress Corrosion Cracking in Simulated Three-Dimensional Microstructures

    Article • Key Engineering Materials, August 2007, Trans Tech Publications

    Prof Thomas J Marrow

  170. A three-dimensional computational model for intergranular cracking

    Article • Computational Materials Science, December 2006, Elsevier

    Prof Thomas J Marrow

  171. Characterization of Material Properties Using an Inverse Method

    Article • Applied Mechanics and Materials, October 2006, Trans Tech Publications

    Prof Thomas J Marrow

  172. X-ray tomography observation of crack propagation in nuclear graphite

    Article • Materials Science and Technology, September 2006, Taylor & Francis

    Prof Thomas J Marrow

  173. X-ray microtomography studies of localised corrosion and transitions to stress corrosion cracking

    Article • Materials Science and Technology, September 2006, Taylor & Francis

    Prof Thomas J Marrow

  174. X-ray microtomographic observation of intergranular stress corrosion cracking in sensitised austenitic stainless steel

    Article • Materials Science and Technology, September 2006, Taylor & Francis

    Prof Thomas J Marrow, Professor Philip J Withers

  175. A two-dimensional mesoscale model for intergranular stress corrosion crack propagation☆

    Article • Acta Materialia, August 2006, Elsevier

    Prof Thomas J Marrow

  176. Three dimensional observations and modelling of intergranular stress corrosion cracking in austenitic stainless steel

    Article • Journal of Nuclear Materials, June 2006, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  177. Numerical modelling of the effects of porosity changes on the mechanical properties of nuclear graphite

    Article • Journal of Nuclear Materials, June 2006, Elsevier

    Prof Thomas J Marrow

  178. Measurement of crack bridging stresses in environment-assisted cracking of duplex stainless by synchrotron diffraction

    Article • Fatigue & Fracture of Engineering Materials & Structures, June 2006, Wiley

    Prof Thomas J Marrow

  179. In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction

    Article • Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms, May 2006, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  180. Mapping the evolution of density in 3D of thermally oxidised graphite for nuclear applications

    Article • Scripta Materialia, March 2006, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  181. Meso-Scale Mechanical Model for Intergranular Stress Corrosion Cracking and Implications for Microstructure Engineering

    Article • January 2006, ASME International

    Prof Thomas J Marrow

  182. Controlled Initiation of Short Fatigue Cracks in 316L Steel

    Article • January 2005, ASME International

    Prof Thomas J Marrow

  183. The effect of thermal oxidation on polycrystalline graphite studied by X-ray tomography

    Article • Carbon, January 2005, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  184. Environment-assisted cracking of cast WE43-T6 magnesium

    Article • Materials Science and Engineering A, December 2004, Elsevier

    Prof Thomas J Marrow

  185. Prediction of Aqueous Solubility Based on Large Datasets Using Several QSPR Models Utilizing Topological Structure Representation

    Article • Chemistry & Biodiversity, November 2004, Wiley

    Prof Thomas J Marrow

  186. High resolution X-ray tomography of short fatigue crack nucleation in austempered ductile cast iron

    Article • International Journal of Fatigue, July 2004, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  187. Fatigue crack nuclei in austempered ductile cast iron

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2002, Wiley

    Prof Thomas J Marrow, Professor Philip J Withers

  188. Short fatigue cracks in austempered ductile cast iron (ADI)

    Article • Fatigue & Fracture of Engineering Materials & Structures, May 2000, Wiley

    Prof Thomas J Marrow

  189. Application of electron backscattered diffraction to cleavage fracture in duplex stainless steel

    Article • Scripta Materialia, May 1999, Elsevier

    Prof Thomas J Marrow

  190. THE CRACK INITIATION TOUGHNESS FOR BRITTLE FRACTURE OF SUPER DUPLEX STAINLESS STEEL

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 1997, Wiley

    Dr Martin Strangwood, Prof Thomas J Marrow

  191. THE BRITTLE FRACTURE OF 475°C EMBRITTLED CAST DUPLEX STAINLESS STEEL

    Article • Fatigue & Fracture of Engineering Materials & Structures, April 1997, Wiley

    Prof Thomas J Marrow

  192. Hydrogen-assisted stable crack growth in iron-3 wt% silicon steel

    Article • Acta Materialia, August 1996, Elsevier

    Professor Mark Aindow, Dr Martin Strangwood, Prof Thomas J Marrow

  193. THE FRACTURE MECHANISM IN 475°C EMBRITTLED FERRITIC STAINLESS STEELS

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 1996, Wiley

    Prof Thomas J Marrow

  194. THE FRACTURE MECHANISM OF 475°C EMBRITTLEMENT IN A DUPLEX STAINLESS STEEL

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 1996, Wiley

    Prof Thomas J Marrow

  195. MICROSTRUCTURAL AND ENVIRONMENTAL EFFECTS ON FATIGUE CRACK PROPAGATION IN DUPLEX STAINLESS STEELS

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 1994, Wiley

    Prof Thomas J Marrow

  196. Fatigue crack propagation mechanisms in a thermally aged duplex stainless steel

    Article • Materials Science and Engineering A, June 1994, Elsevier

    Prof Thomas J Marrow

  197. Toughening mechanisms in the high temperature fracture of high purity alumina

    Article • Materials Science and Engineering A, March 1994, Elsevier

    Prof Thomas J Marrow

  198. The brittle/ductile transition in cubic stabilised zirconia

    Article • Journal of the European Ceramic Society, January 1994, Elsevier

    Prof Thomas J Marrow

  199. In-situ scanning acoustic microscopy of crack bridging in alumina

    Article • Journal of the European Ceramic Society, January 1994, Elsevier

    Prof Thomas J Marrow

  200. Scanning Acoustic Microscopy Observations of High-Temperature Crack-Bridging Mechanisms in Alumina

    Article • Journal of the American Ceramic Society, November 1993, Wiley

    Prof Thomas J Marrow

  201. Temperature effects on the mechanism of time independent hydrogen assisted fatigue crack propagation in steels

    Article • Acta Metallurgica et Materialia, August 1992, Elsevier

    Prof Thomas J Marrow

  202. Effect of mean stress on hydrogen assisted fatique crack propagation in duplex stainless steel

    Article • Acta Metallurgica et Materialia, June 1991, Elsevier

    Prof Thomas J Marrow

  203. Crack Propagation Resistance and Damage Mechanisms in Nuclear Graphite

    Article • Springer Science + Business Media

    Prof Thomas J Marrow

  204. Effects of Surface Finish on the Fatigue Limit in Austenitic Stainless Steels (Modelling and Experimental Observations)

    Article • Springer Science + Business Media

    Prof Thomas J Marrow

  205. Environment-Assisted Cracking of High-Strength Magnesium Alloys WE43-T6

    Article • Springer Science + Business Media

    Prof Thomas J Marrow

  206. Intergranular Stress Corrosion Crack Propagation in Sensitised Austenitic Stainless Steel (Microstructure Modelling and Experimental Observation)

    Article • Springer Science + Business Media

    Prof Thomas J Marrow