All Stories

  1. Learning shared hyperelastic constitutive representation from heterogeneous full-field experiments across multiple materials

    Article • Computer Methods in Applied Mechanics and Engineering, February 2027, Elsevier

    Dr Francois Hild

  2. Element-deletion-enhanced digital image correlation for automated crack detection and tracking in lattice materials

    Article • Optics and Lasers in Engineering, November 2026, Elsevier

    Dr Francois Hild

  3. DIC analysis of unreinforced masonry panels under diagonal compression using virtual gauges and damage indicators

    Article • Engineering Structures, October 2026, Elsevier

    Dr Francois Hild

  4. Damage of a structure under multiaxial dynamic inertial loading: A lumped damage approach

    Article • European Journal of Mechanics - A/Solids, September 2026, Elsevier

    Dr Francois Hild

  5. Surface and volumetric elasticity characterisation of hydraulic lime mortar prisms under compression

    Article • Construction and Building Materials, September 2026, Elsevier

    Dr Francois Hild, Prof Thomas J Marrow

  6. Impact of X-ray CT calibration steps on DVC and P-DVC displacement uncertainties

    Article • Measurement Science and Technology, August 2026, Institute of Physics Publishing

    Dr Francois Hild

  7. Quantification of deformation and cracking processes of an aggregate due to alkali–silica reaction using digital volume correlation from X-ray CT images

    Article • Cement and Concrete Composites, August 2026, Elsevier

    Dr Francois Hild

  8. Mechanics-guided data-enhanced kinematic models for time-resolved DVC

    Article • Comptes Rendus Mécanique, June 2026, Cellule MathDoc/CEDRAM

    Dr Francois Hild

  9. From sparse 3D scans to dense 4D fracture measurements: Integrated projection-enhanced DVC

    Article • International Journal of Mechanical Sciences, June 2026, Elsevier

    Dr Francois Hild

  10. Evaluation of stress intensity factors using meshless integrated digital image / volume correlation

    Article • Engineering Fracture Mechanics, May 2026, Elsevier

    Dr Francois Hild

  11. Microporosity as key driver of the in-situ properties of a LPBF-AlSi10Mg mesoporous metamaterial

    Article • Journal of the Mechanics and Physics of Solids, May 2026, Elsevier

    Dr Francois Hild

  12. Identification of non linear parameters from masonry triplet shear tests using digital image correlation

    Article • Matériaux et Constructions, April 2026, Springer Science + Business Media

    Dr Francois Hild

  13. Failure mechanism identification for multiaxially loaded woven composites using hybrid infrared-visible light correlation

    Article • Engineering Failure Analysis, March 2026, Elsevier

    Dr Francois Hild

  14. Influence of printing orientation of Inconel 718 specimens on LEFM parameters analyzed via DVC

    Article • Engineering Fracture Mechanics, January 2026, Elsevier

    Dr Francois Hild

  15. Surface and volumetric elasticity characterisation of hydraulic lime mortar prisms under compression

    Article • January 2026, Elsevier

    Dr Francois Hild, Prof Thomas J Marrow

  16. Quantification of deformation and cracking processes of an aggregate due to alkali–silica reaction using digital volume correlation from X-ray CT images

    Article • January 2026, Elsevier

    Dr Francois Hild

  17. Model-driven digital volume correlation: A step forward in experimental analyses of metamaterial deformations

    Article • Mathematics and Mechanics of Solids, December 2025, SAGE Publications

    Dr Francois Hild

  18. On the identification of rigid body boundary conditions from full-field measurements

    Article • International Journal of Solids and Structures, November 2025, Elsevier

    Dr Francois Hild

  19. Exploring the shear behavior of masonry triplets via digital image correlation, damage quantification and Mohr-Coulomb criterion identification

    Article • Structures, October 2025, Elsevier

    Dr Francois Hild

  20. Identification of the interfacial fracture energy at high temperature of an environmental barrier coating on a ceramic matrix composite

    Article • Engineering Fracture Mechanics, October 2025, Elsevier

    Dr Francois Hild

  21. On the future of experimental mechanics in the digital world: An eikological perspective

    Article • European Journal of Mechanics - A/Solids, September 2025, Elsevier

    Dr Francois Hild

  22. Identifying heterogeneous elastic parameters from full-field measurements with reduced bases

    Article • International Journal of Mechanical Sciences, August 2025, Elsevier

    Dr Francois Hild

  23. Damage quantification in an AlSi10Mg cellular metamaterial using 4D measurements

    Article • Measurement Science and Technology, July 2025, Institute of Physics Publishing

    Dr Francois Hild

  24. Virtual design of masonry triplet shear tests using digital image correlation

    Article • Matériaux et Constructions, July 2025, Springer Science + Business Media

    Dr Francois Hild

  25. On Detecting Elastoplastic Shakedown Using Minimal Digital Image Correlation Results and an Elastic Model: Demonstration for AA6061 Auxetic Sheets

    Article • Experimental Mechanics, July 2025, Springer Science + Business Media

    Dr Francois Hild

  26. Augmented DIC and FE analyses: a two-field approach to damage localization

    Article • Advanced Modeling and Simulation in Engineering Sciences, July 2025, Springer Science + Business Media

    Dr Francois Hild

  27. Stress intensity factor determination along a kinked crack path by DIC analyses

    Article • International Journal of Fracture, June 2025, Springer Science + Business Media

    Dr Francois Hild

  28. Quantifying damage in an AlSi10Mg porous metamaterial through projection-enhanced DVC

    Article • Measurement Science and Technology, June 2025, Institute of Physics Publishing

    Dr Francois Hild

  29. Rescaling and mesoshear deformations of lattice metamaterials

    Article • International Journal of Solids and Structures, June 2025, Elsevier

    Dr Francois Hild

  30. Quantification of Reinforcement Debonding in Damaged Mortar via Digital Volume Correlation

    Article • Experimental Mechanics, March 2025, Springer Science + Business Media

    Dr Francois Hild

  31. Simulation-guided PGD-Stereocorrelation for hybrid testing

    Article • Computer Methods in Applied Mechanics and Engineering, February 2025, Elsevier

    Dr Francois Hild

  32. Link between b.c.c.–f.c.c. orientation relationship and austenite morphology in CF8M stainless steel

    Article • Journal of Applied Crystallography, October 2024, International Union of Crystallography

    Dr Francois Hild

  33. Determination of interfacial fracture energy of an environmental barrier coating on ceramic matrix composite substrate

    Article • Journal of the European Ceramic Society, September 2024, Elsevier

    Dr Francois Hild

  34. Damage Detection and Quantification via Multiview DIC at Varying Scales

    Article • Experimental Mechanics, March 2024, Springer Science + Business Media

    Dr Francois Hild

  35. Brightness and contrast corrections for stereocorrelation

    Article • Mechanical Systems and Signal Processing, February 2024, Elsevier

    Dr Francois Hild

  36. Multi-Window Setup for Thermomechanical Experiments Assisted by DIC up to 900°C

    Article • Materials Research, January 2024, FapUNIFESP (SciELO)

    Dr Francois Hild

  37. Damage Detection in a Polymer Matrix Composite from 4D Displacement Field Measurements

    Article • Materials, September 2023, MDPI AG

    Dr Francois Hild

  38. Digital image correlation analyses of masonry infilled frame: Uncertainty-based mesh refinement and damage quantification

    Article • Mathematics and Mechanics of Solids, July 2023, SAGE Publications

    Dr Francois Hild

  39. Mesoscale DVC analyses and parameter calibration for pantographic block in 3-point flexure

    Article • European Journal of Mechanics - A/Solids, July 2023, Elsevier

    Dr Francois Hild

  40. Experimental and numerical analyses of the interaction of creep with mesoscale damage in cementitious materials

    Article • Mechanics of Materials, June 2023, Elsevier

    Dr Francois Hild

  41. Damage evolution in coal under different loading modes using advanced digital volume correlation based on X-ray computed tomography

    Article • Proceedings of the Institution of Civil Engineers - Energy, April 2023, Elsevier

    Dr Francois Hild

  42. Modal characterization of crack network development in an MgO containing refractory castable

    Article • The Journal of Strain Analysis for Engineering Design, January 2023, SAGE Publications

    Dr Francois Hild

  43. Characterization of glass fiber reinforced polymer via Digital Volume Correlation: Investigation of notch sensitivity

    Article • Mechanics of Materials, January 2023, Elsevier

    Dr Francois Hild

  44. Shear loading dominated damage mechanisms and strain localization studied by in situ 3D laminography imaging and Digital Volume Correlation for AA2198-T8

    Article • Mechanics of Materials, January 2023, Elsevier

    Dr Francois Hild

  45. Deformation mode in 3-point flexure on pantographic block

    Article • International Journal of Solids and Structures, January 2023, Elsevier

    Dr Francois Hild

  46. Digital Volume Correlation for large deformations of soft tissues: Pipeline and proof of concept for the application to breast ex vivo deformations

    Article • Journal of the Mechanical Behavior of Biomedical Materials, December 2022, Elsevier

    Dr Francois Hild

  47. Identification of microscale fracture models for mortar with in-situ tests

    Article • International Journal of Mechanical Sciences, December 2022, Elsevier

    Dr Francois Hild

  48. Calibration of cohesive parameters for a castable refractory using 4D tomographic data and realistic crack path from in-situ wedge splitting test

    Article • Journal of the European Ceramic Society, September 2022, Elsevier

    Dr Francois Hild

  49. Probing Constitutive Models of Bohus Granite with In Situ Spherical Indentation and Digital Volume Correlation

    Article • Rock Mechanics and Rock Engineering, August 2022, Springer Science + Business Media

    Dr Francois Hild

  50. 2D Numerical Simulation of Auxetic Metamaterials Based on Force and Deformation Consistency

    Article • Materials, June 2022, MDPI AG

    Dr Francois Hild

  51. Insights into a dual-phase steel microstructure using EBSD and image-processing-based workflow

    Article • Journal of Applied Crystallography, June 2022, International Union of Crystallography

    Dr Francois Hild

  52. Parametric Experimentation to Evaluate Chiral Bars Representative of Granular Motif

    Article • International Journal of Mechanical Sciences, May 2022, Elsevier

    Dr Francois Hild

  53. An examination of local strain fields evolution in ductile cast iron through micromechanical simulations based on 3D imaging

    Article • Journal of Theoretical Computational and Applied Mechanics, April 2022, Centre pour la Communication Scientifique Directe (CCSD)

    Dr Francois Hild

  54. Digital Volume Correlation analyses to study deformation and damage mechanisms of teak in torsion

    Article • Comptes Rendus Mécanique, April 2022, Cellule MathDoc/CEDRAM

    Dr Francois Hild

  55. Multiscalar DIC analyses of granular string under stretch reveal non-standard deformation mechanisms

    Article • International Journal of Solids and Structures, March 2022, Elsevier

    Dr Francois Hild

  56. On mesoscale strain fluctuations in tensile tests on additively manufactured 17-4PH stainless steel

    Article • The Journal of Strain Analysis for Engineering Design, November 2021, SAGE Publications

    Dr Francois Hild

  57. Damage Quantification via Digital Volume Correlation with Heterogeneous Mechanical Regularization: Application to an In situ Meso-Flexural Test on Mortar

    Article • Experimental Mechanics, October 2021, Springer Science + Business Media

    Dr Francois Hild

  58. Improvement of the Arcan Setup for the Investigation of Thin Sheet Behavior Under Shear Loading

    Article • Experimental Mechanics, October 2021, Springer Science + Business Media

    Dr Francois Hild

  59. Sub-pixel detection of laser-induced damage and its growth on fused silica optics using registration residuals

    Article • Optics Express, October 2021, Optical Society of America (OSA)

    Dr Francois Hild

  60. Pyramidal adaptive meshing for Digital Image Correlation dealing with cracks

    Article • Engineering Fracture Mechanics, October 2021, Elsevier

    Dr Francois Hild

  61. Fracture energy evaluation of refractories in wedge splitting tests from notch opening displacements

    Article • Journal of the European Ceramic Society, August 2021, Elsevier

    Dr Francois Hild

  62. Effective Toughness of Heterogeneous Materials with Rate-Dependent Fracture Energy

    Article • Physical Review Letters, July 2021, American Physical Society (APS)

    Dr Francois Hild

  63. On the calibration of cohesive parameters for refractories from notch opening displacements in wedge splitting tests

    Article • Journal of the European Ceramic Society, July 2021, Elsevier

    Dr Francois Hild

  64. Displacement Uncertainty Quantifications in T3-Stereocorrelation

    Article • Experimental Mechanics, February 2021, Springer Science + Business Media

    Dr Francois Hild

  65. Crack growth measurement and J ‐integral evaluation of additively manufactured polymer using digital image correlation and FE modeling

    Article • Fatigue & Fracture of Engineering Materials & Structures, February 2021, Wiley

    Dr Francois Hild

  66. On the effect of sintering temperature on the fracture energy of an Alumina-Mullite-Zirconia castable at 600°C

    Article • Journal of the European Ceramic Society, February 2021, Elsevier

    Dr Francois Hild

  67. In-situ X-CT Test on Mortar Micro-specimen Coupled with Mesoscale Numerical Simulations of Fracture

    Article • January 2021, Springer Science + Business Media

    Dr Francois Hild

  68. Study of Frictional Effects of Granite Subjected to Quasi-Static Contact Loading

    Article • Lubricants, December 2020, MDPI AG

    Dr Francois Hild

  69. Poynting effects in pantographic metamaterial captured via multiscale DVC

    Article • The Journal of Strain Analysis for Engineering Design, December 2020, SAGE Publications

    Dr Francois Hild

  70. Optimized gauging for tire-rim loading identification

    Article • European Journal of Mechanics - A/Solids, December 2020, Elsevier

    Dr Francois Hild

  71. Multiscale DIC Applied to Pantographic Structures

    Article • Experimental Mechanics, October 2020, Springer Science + Business Media

    Dr Francois Hild

  72. Interlaboratory Study of Digital Volume Correlation Error Due to X-Ray Computed Tomography Equipment and Scan Parameters: an Update from the DVC Challenge

    Article • Experimental Mechanics, September 2020, Springer Science + Business Media

    Dr Francois Hild

  73. On the validation of a priori estimates of standard displacement uncertainties in T3-stereocorrelation

    Article • Measurement Science and Technology, August 2020, Institute of Physics Publishing

    Dr Francois Hild

  74. On the identification of cohesive zone model for curved crack in mortar

    Article • Strain, July 2020, Wiley

    Dr Francois Hild

  75. Displacement uncertainties with multiview correlation schemes

    Article • The Journal of Strain Analysis for Engineering Design, June 2020, SAGE Publications

    Dr Francois Hild

  76. Measuring acceleration fields via regularized digital image correlation

    Article • Advanced Modeling and Simulation in Engineering Sciences, June 2020, Springer Science + Business Media

    Dr Francois Hild

  77. Toward virtual design and optimization of a structural test monitored by a multi-view system

    Article • The Journal of Strain Analysis for Engineering Design, March 2020, SAGE Publications

    Dr Francois Hild

  78. Two-dimensional continua capable of large elastic extension in two independent directions: asymptotic homogenization, numerical simulations and experimental evidence

    Article • Mechanics Research Communications, December 2019, Elsevier

    Dr Francois Hild

  79. Global digital image correlation up to very high temperatures with grey level corrections

    Article • Measurement Science and Technology, September 2019, Institute of Physics Publishing

    Dr Francois Hild

  80. Sub-minute In Situ Fracture Test in a Laboratory CT Scanner

    Article • Integrating Materials and Manufacturing Innovation, August 2019, Springer Science + Business Media

    Dr Francois Hild

  81. Calibrating thermoelastic stress analysis with integrated digital image correlation: Application to fatigue cracks

    Article • The Journal of Strain Analysis for Engineering Design, July 2019, SAGE Publications

    Dr Francois Hild

  82. Measurement of kinematic fields via DIC for impact engineering applications

    Article • International Journal of Impact Engineering, April 2019, Elsevier

    Dr Francois Hild

  83. Estimation of Elastic Strain by Integrated Image Correlation on Electron Diffraction Patterns

    Article • Ultramicroscopy, February 2019, Elsevier

    Dr Francois Hild

  84. Crack initiation and propagation under thermal fatigue of austenitic stainless steel

    Article • International Journal of Fatigue, February 2019, Elsevier

    Dr Francois Hild

  85. Fast four-dimensional tensile test monitored via X-ray computed tomography: Elastoplastic identification from radiographs

    Article • The Journal of Strain Analysis for Engineering Design, January 2019, SAGE Publications

    Dr Francois Hild

  86. On the analysis of heat haze effects with spacetime DIC

    Article • Optics and Lasers in Engineering, December 2018, Elsevier

    Dr Francois Hild

  87. On the analysis of canvas wrinkling via isogeometric stereocorrelation

    Article • International Journal of Solids and Structures, December 2018, Elsevier

    Dr Francois Hild

  88. Fast four-dimensional tensile test monitored via X-ray computed tomography: Single projection–based digital volume correlation dedicated to slender samples

    Article • The Journal of Strain Analysis for Engineering Design, September 2018, SAGE Publications

    Dr Francois Hild

  89. Mode-enhanced space-time DIC: Applications to ultra high-speed imaging

    Article • Measurement Science and Technology, September 2018, Institute of Physics Publishing

    Dr Francois Hild

  90. Validation of Registration Techniques Applied to XRD Signals for Stress Evaluations in Titanium Alloys

    Article • Experimental Mechanics, June 2018, Springer Science + Business Media

    Dr Francois Hild

  91. Digital Volume Correlation: Review of Progress and Challenges

    Article • Experimental Mechanics, June 2018, Springer Science + Business Media

    Dr Francois Hild

  92. Enhanced Piola–Hencky discrete models for pantographic sheets with pivots without deformation energy: numerics and experiments

    Article • International Journal of Solids and Structures, May 2018, Elsevier

    Dr Francois Hild

  93. On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage

    Article • European Journal of Mechanics - A/Solids, April 2018, Elsevier

    Dr Francois Hild

  94. Measuring topographies from conventional SEM acquisitions

    Article • Ultramicroscopy, April 2018, Elsevier

    Dr Francois Hild

  95. Spatiotemporal regularization for digital image correlation: Application to infrared camera frames

    Article • International Journal for Numerical Methods in Engineering, February 2018, Wiley

    Dr Francois Hild

  96. Effect of void arrangement on ductile damage mechanisms in nodular graphite cast iron: In situ 3D measurements

    Article • Engineering Fracture Mechanics, February 2018, Elsevier

    Dr Francois Hild

  97. Regularised digital-level corrections for infrared image correlation

    Article • Quantitative InfraRed Thermography Journal, January 2018, Taylor & Francis

    Dr Francois Hild, Stephane Roux

  98. Self-calibration for lab-μCT using space-time regularized projection-based DVC and model reduction

    Article • Measurement Science and Technology, January 2018, Institute of Physics Publishing

    Dr Francois Hild

  99. Evaluation of measurement uncertainties of digital volume correlation applied to laminography data

    Article • The Journal of Strain Analysis for Engineering Design, December 2017, SAGE Publications

    Dr Francois Hild

  100. Experimental-Numerical Validation Framework for Micromechanical Simulations

    Article • December 2017, Springer Science + Business Media

    Dr Francois Hild

  101. Backtracking Depth-Resolved Microstructures for Crystal Plasticity Identification—Part 1: Backtracking Microstructures

    Article • JOM, September 2017, Springer Science + Business Media

    Dr Francois Hild

  102. An extension of digital volume correlation for multimodality image registration

    Article • Measurement Science and Technology, August 2017, Institute of Physics Publishing

    Dr Francois Hild

  103. On the identifiability of Hill-1948 plasticity model with a single biaxial test on very thin sheet

    Article • Strain, June 2017, Wiley

    Dr Francois Hild

  104. Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging

    Article • Computational Mechanics, November 2016, Springer Science + Business Media

    Dr Francois Hild

  105. I-DIC-based identification strategy of failure criteria: application to titanium and nickel-based alloys

    Article • Meccanica, October 2016, Springer Science + Business Media

    Dr Francois Hild

  106. Identification method for the mixed mode interlaminar behavior of a composite thermoset using displacement field measurements and load data

    Article • Composites Part A Applied Science and Manufacturing, October 2016, Elsevier

    Dr Francois Hild

  107. Characterization of the nonlinear behavior of nodular graphite cast iron via inverse identification–Analysis of uniaxial tests

    Article • European Journal of Mechanics - A/Solids, September 2016, Elsevier

    Dr Francois Hild

  108. Identification of crystal plasticity parameters using DIC measurements and weighted FEMU

    Article • Mechanics of Materials, September 2016, Elsevier

    Dr Francois Hild

  109. Experimental and numerical analysis of thermal striping in automotive brake discs

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2016, Wiley

    Dr Francois Hild

  110. Toward 4D mechanical correlation

    Article • Advanced Modeling and Simulation in Engineering Sciences, May 2016, Springer Science + Business Media

    Dr Francois Hild

  111. Mesh-Based Shape Measurements with Stereocorrelation

    Article • Experimental Mechanics, April 2016, Springer Science + Business Media

    Dr Francois Hild

  112. Optimization of a Cruciform Specimen Geometry for the Identification of Constitutive Parameters Based Upon Full-Field Measurements

    Article • Strain, March 2016, Wiley

    Dr Francois Hild

  113. Integrated Digital Image Correlation considering gray level and blur variations: Application to distortion measurements of IR camera

    Article • Optics and Lasers in Engineering, March 2016, Elsevier

    Dr Francois Hild

  114. elastoplastic identification

    Article • The Journal of Strain Analysis for Engineering Design, February 2016, SAGE Publications

    Dr Francois Hild

  115. Constitutive model for flake graphite cast iron automotive brake discs: induced anisotropic damage model under complex loadings

    Article • Continuum Mechanics and Thermodynamics, January 2016, Springer Science + Business Media

    Dr Francois Hild

  116. Constitutive model for flake graphite cast iron automotive brake discs: from macroscopic multiscale models to a 1D rheological description

    Article • Continuum Mechanics and Thermodynamics, June 2015, Springer Science + Business Media

    Dr Francois Hild

  117. On the Evaluation of Stress Triaxiality Fields in a Notched Titanium Alloy Sample Via Integrated Digital Image Correlation

    Article • Journal of Applied Mechanics, June 2015, ASME International

    Dr Francois Hild

  118. Analysis of Asymmetrical Creep of a Ceramic at 1350°C by Digital Image Correlation

    Article • Journal of the American Ceramic Society, April 2015, Wiley

    Dr Francois Hild

  119. Identification of a set of macroscopic elastic parameters in a 3D woven composite: Uncertainty analysis and regularization

    Article • International Journal of Solids and Structures, March 2015, Elsevier

    Dr Francois Hild

  120. Damage measurements via DIC

    Article • International Journal of Fracture, February 2015, Springer Science + Business Media

    Dr Francois Hild

  121. Recent Advances and Perspectives in Digital Image Correlation

    Article • Experimental Mechanics, January 2015, Springer Science + Business Media

    Dr Francois Hild

  122. On characteristic parameters involved in dynamic fragmentation processes

    Article • Mechanics of Materials, January 2015, Elsevier

    Dr Francois Hild

  123. DIC identification and X-FEM simulation of fatigue crack growth based on the Williams’ series

    Article • International Journal of Solids and Structures, January 2015, Elsevier

    Dr Francois Hild

  124. Damage law identification from full field displacement measurement: Application to four-point bending test for plasterboard

    Article • European Journal of Mechanics - A/Solids, January 2015, Elsevier

    Dr Francois Hild

  125. A numerical study of the influence from pre-existing cracks on granite rock fragmentation at percussive drilling

    Article • International Journal for Numerical and Analytical Methods in Geomechanics, October 2014, Wiley

    Dr Francois Hild

  126. Digital Volume Correlation Applied to X-ray Tomography Images from Spherical Indentation Tests on Lightweight Gypsum

    Article • Strain, August 2014, Wiley

    Dr Francois Hild

  127. Projection Savings in CT-based Digital Volume Correlation

    Article • Experimental Mechanics, May 2014, Springer Science + Business Media

    Dr Francois Hild

  128. Estimation of Elastoplastic Parameters via Weighted FEMU and Integrated-DIC

    Article • Experimental Mechanics, May 2014, Springer Science + Business Media

    Dr Francois Hild

  129. Integrated digital image correlation for the evaluation and correction of optical distortions

    Article • Optics and Lasers in Engineering, May 2014, Elsevier

    Dr Francois Hild

  130. In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet

    Article • Acta Materialia, May 2014, Elsevier

    Dr Francois Hild

  131. Localized strain field measurement on laminography data with mechanical regularization

    Article • Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms, April 2014, Elsevier

    Dr Francois Hild

  132. Direct Stress-Strain Measurements from Bulged Membranes Using Topography Image Correlation

    Article • Experimental Mechanics, January 2014, Springer Science + Business Media

    Dr Francois Hild

  133. Thermo-mechanical behavior and fatigue strength of a grey cast iron for automotive brake discs considering graphite flakes debonding

    Article • MATEC Web of Conferences, January 2014, EDP Sciences

    Dr Francois Hild

  134. Characterization of SEM speckle pattern marking and imaging distortion by digital image correlation

    Article • Measurement Science and Technology, November 2013, Institute of Physics Publishing

    Dr Francois Hild

  135. Granite rock fragmentation at percussive drilling - experimental and numerical investigation

    Article • International Journal for Numerical and Analytical Methods in Geomechanics, October 2013, Wiley

    Dr Francois Hild

  136. Nonlinear mechanical properties estimated from images of a mechanical test

    Article • Journal of Physics Conference Series, October 2013, Institute of Physics Publishing

    Dr Francois Hild

  137. CAD-based calibration and shape measurement with stereoDIC

    Article • Experimental Mechanics, September 2013, Springer Science + Business Media

    Dr Francois Hild

  138. Efficient Binary Tomographic Reconstruction

    Article • Journal of Mathematical Imaging and Vision, September 2013, Springer Science + Business Media

    Dr Francois Hild

  139. Computation of full-field displacements in a scaffold implant using digital volume correlation and finite element analysis

    Article • Medical Engineering & Physics, September 2013, Elsevier

    Dr Francois Hild

  140. Controlling Stress Intensity Factor Histories with Digital Images

    Article • Experimental Mechanics, August 2013, Springer Science + Business Media

    Dr Francois Hild

  141. Performing DVC at the Voxel Scale

    Article • August 2013, Springer Science + Business Media

    Dr Francois Hild

  142. Shape Measurement Using CAD-Based Stereo-DIC

    Article • August 2013, Springer Science + Business Media

    Dr Francois Hild

  143. 2D and 3D Analyses of Cracks Via DIC

    Article • July 2013, Springer Science + Business Media

    Dr Francois Hild

  144. Mechanics-aided digital image correlation

    Article • The Journal of Strain Analysis for Engineering Design, June 2013, SAGE Publications

    Dr Francois Hild

  145. Identification of interlaminar fracture properties of a composite laminate using local full-field kinematic measurements and finite element simulations

    Article • Composites Part A Applied Science and Manufacturing, June 2013, Elsevier

    Dr Francois Hild

  146. Experimental analysis of masonry infilled frames using digital image correlation

    Article • Matériaux et Constructions, May 2013, Springer Science + Business Media

    Dr Francois Hild

  147. Image-based identification procedure of a crack propagation law

    Article • Engineering Fracture Mechanics, May 2013, Elsevier

    Dr Francois Hild

  148. Description of the Dynamic Fragmentation of Glass with a Meso-Damage Model

    Article • March 2013, Wiley

    Dr Francois Hild

  149. Deformation modes of nanostructured thin film under controlled biaxial deformation

    Article • Thin Solid Films, March 2013, Elsevier

    Dr Francois Hild

  150. Addendum to: Assessment of Digital Image Correlation Measurement Errors: Methodology and Results [Experimental Mechanics 49(3)]

    Article • Experimental Mechanics, February 2013, Springer Science + Business Media

    Dr Francois Hild

  151. A Non-Local Damage Model for Heterogeneous Rocks - Application to Rock Fracturing Evaluation Under Gas Injection Conditions

    Article • February 2013, Wiley

    Dr Francois Hild

  152. Probabilistic Prediction of Fatigue Life of Cracked Parts: Linear Elastic Fracture Mechanics based Approach

    Article • Procedia Engineering, January 2013, Elsevier

    Dr Francois Hild

  153. Experimental Facility for High Cycle Thermal Fatigue Tests Using Laser Shocks

    Article • Procedia Engineering, January 2013, Elsevier

    Dr Francois Hild

  154. Experimental analysis and mathematical modeling of fracture in RC elements with any aspect ratio

    Article • Engineering Structures, January 2013, Elsevier

    Dr Francois Hild

  155. Full-Field Measurements and Identification in Solid Mechanics

    Article • December 2012, Wiley

    Dr Francois Hild

  156. Digital Image Correlation

    Article • December 2012, Wiley

    Dr Francois Hild

  157. Analysis of necking in high speed experiments by stereocorrelation

    Article • International Journal of Impact Engineering, November 2012, Elsevier

    Dr Francois Hild

  158. Tomographic reconstruction of binary fields

    Article • Journal of Physics Conference Series, September 2012, Institute of Physics Publishing

    Dr Francois Hild

  159. On the Resolution of Local and Global DIC Approaches

    Article • September 2012, Springer Science + Business Media

    Dr Francois Hild

  160. Feasibility Study of 3D Digital Volume Correlation of Synchrotron Radiation Laminography Data for Displacement Field Measurement During Ductile Crack Initiation

    Article • September 2012, Springer Science + Business Media

    Dr Francois Hild

  161. CAD-Based Calibration of a 3D DIC System

    Article • September 2012, Springer Science + Business Media

    Dr Francois Hild

  162. Artifact Correction for DVC Measurements Using a Laboratory X-Ray Source

    Article • September 2012, Springer Science + Business Media

    Dr Francois Hild

  163. 3D Digital Volume Correlation of Synchrotron Radiation Laminography Images of Ductile Crack Initiation: An Initial Feasibility Study

    Article • Experimental Mechanics, August 2012, Springer Science + Business Media

    Dr Francois Hild

  164. Global Digital Image Correlation for Pressure Deflected Membranes

    Article • August 2012, Springer Science + Business Media

    Dr Francois Hild

  165. Volume changes in a filled elastomer studied via digital image correlation

    Article • Polymer Testing, August 2012, Elsevier

    Dr Francois Hild

  166. « Radioscopies » d’une fissure de fatigue

    Article • Instrumentation Mesure Métrologie, June 2012, Lavoisier

    Dr Francois Hild

  167. Utilisation de l’imagerie IR pour l’étude de la fatigue des aciers. Premières observations d’effets de surface

    Article • Instrumentation Mesure Métrologie, June 2012, Lavoisier

    Dr Francois Hild

  168. Analysis of image series through global digital image correlation

    Article • The Journal of Strain Analysis for Engineering Design, April 2012, SAGE Publications

    Dr Francois Hild

  169. A probabilistic nonlocal model for crack initiation and propagation in heterogeneous brittle materials

    Article • International Journal for Numerical Methods in Engineering, April 2012, Wiley

    Dr Francois Hild

  170. Comparison of Local and Global Approaches to Digital Image Correlation

    Article • Experimental Mechanics, March 2012, Springer Science + Business Media

    Dr Francois Hild

  171. Identification of a crack propagation law by digital image correlation

    Article • International Journal of Fatigue, March 2012, Elsevier

    Dr Francois Hild

  172. Three-dimensional Analysis of Fatigue Crack Propagation using X-Ray Tomography, Digital Volume Correlation and Extended Finite Element Simulations

    Article • Procedia IUTAM, January 2012, Elsevier

    Dr Francois Hild

  173. Mechanical Assistance to DIC

    Article • Procedia IUTAM, January 2012, Elsevier

    Dr Francois Hild

  174. Foreword

    Article • Procedia IUTAM, January 2012, Elsevier

    Dr Francois Hild

  175. Digital volume correlation: what are the limits to the spatial resolution?

    Article • Mechanics & Industry, January 2012, EDP Sciences

    Dr Francois Hild

  176. Compression Test for Metal Characterization using Digital Image Correlation and Inverse Modeling

    Article • Procedia IUTAM, January 2012, Elsevier

    Dr Francois Hild

  177. Combined synchrotron X-ray and image-correlation analyses of biaxially deformed W/Cu nanocomposite thin films on Kapton

    Article • Journal of Applied Crystallography, September 2011, International Union of Crystallography

    Dr Francois Hild

  178. A critical local energy release rate criterion for fatigue fracture of elastomers

    Article • Journal of Polymer Science Part B Polymer Physics, September 2011, Wiley

    Dr Francois Hild

  179. Digital volume correlation analyses of synchrotron tomographic images

    Article • The Journal of Strain Analysis for Engineering Design, August 2011, SAGE Publications

    Dr Francois Hild

  180. Identification of In Situ Frictional Properties of Bolted Assemblies with Digital Image Correlation

    Article • Experimental Mechanics, July 2011, Springer Science + Business Media

    Dr Francois Hild

  181. Fatigue microcrack detection with digital image correlation

    Article • The Journal of Strain Analysis for Engineering Design, June 2011, SAGE Publications

    Dr Francois Hild

  182. Optimal and noise-robust extraction of Fracture Mechanics parameters from kinematic measurements

    Article • Engineering Fracture Mechanics, June 2011, Elsevier

    Dr Francois Hild

  183. Hydro-mechanical modelling of geological CO2storage and the study of possible caprock fracture mechanisms

    Article • Georisk Assessment and Management of Risk for Engineered Systems and Geohazards, June 2011, Taylor & Francis

    Dr Francois Hild

  184. On the stored and dissipated energies in heterogeneous rate-independent materials

    Article • Continuum Mechanics and Thermodynamics, April 2011, Springer Science + Business Media

    Dr Francois Hild

  185. Advanced Imaging Methods

    Article • Experimental Mechanics, February 2011, Springer Science + Business Media

    Dr Francois Hild

  186. On the Identification and Validation of an Anisotropic Damage Model Using Full-field Measurements

    Article • International Journal of Damage Mechanics, January 2011, SAGE Publications

    Dr Francois Hild

  187. On the analysis of notched concrete beams: From measurement with digital image correlation to identification with boundary element method of a cohesive model

    Article • Engineering Fracture Mechanics, January 2011, Elsevier

    Dr Francois Hild

  188. Measurement of applied strains in thin films deposited onto polymer by synchrotron X-ray diffraction

    Article • Procedia Engineering, January 2011, Elsevier

    Dr Francois Hild

  189. IDENTIFICATION AND PROBABILISTIC MODELING OF MESOCRACK INITIATIONS IN 304L STAINLESS STEEL

    Article • International Journal for Multiscale Computational Engineering, January 2011, Begell House

    Dr Francois Hild

  190. Fatigue crack propagation law measured from integrated digital image correlation: the example of Ti35 thin sheets

    Article • Procedia Engineering, January 2011, Elsevier

    Dr Francois Hild

  191. Calibration of constitutive models of steel beams subject to local buckling by using digital image correlation

    Article • European Journal of Mechanics - A/Solids, January 2011, Elsevier

    Dr Francois Hild

  192. A space–time approach in digital image correlation: Movie-DIC

    Article • Optics and Lasers in Engineering, January 2011, Elsevier

    Dr Francois Hild

  193. Enriched kinematic fields of cracked structures

    Article • International Journal of Solids and Structures, December 2010, Elsevier

    Dr Francois Hild

  194. 3D X-ray Microtomography Volume Correlation to Study Fatigue Crack Growth

    Article • Advanced Engineering Materials, November 2010, Wiley

    Dr Francois Hild

  195. Development of a synchrotron biaxial tensile device for in situ characterization of thin films mechanical response

    Article • Review of Scientific Instruments, October 2010, American Institute of Physics

    Dr Francois Hild

  196. Voxel-Scale Digital Volume Correlation

    Article • Experimental Mechanics, September 2010, Springer Science + Business Media

    Dr Francois Hild

  197. Hydro-mechanical modelling of geological CO2storage and the study of possible caprock fracture mechanisms

    Article • Georisk Assessment and Management of Risk for Engineered Systems and Geohazards, September 2010, Taylor & Francis

    Dr Francois Hild

  198. Analysis and Artifact Correction for Volume Correlation Measurements Using Tomographic Images from a Laboratory X-ray Source

    Article • Experimental Mechanics, August 2010, Springer Science + Business Media

    Dr Francois Hild

  199. Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation

    Article • Acta Materialia, May 2010, Elsevier

    Dr Francois Hild

  200. Three dimensional experimental and numerical multiscale analysis of a fatigue crack

    Article • Computer Methods in Applied Mechanics and Engineering, April 2010, Elsevier

    Dr Francois Hild

  201. Probabilistic multiscale models and measurements of self-heating under multiaxial high cycle fatigue

    Article • Journal of the Mechanics and Physics of Solids, April 2010, Elsevier

    Dr Francois Hild

  202. Mixed-mode crack propagation using a Hybrid Analytical and eXtended Finite Element Method

    Article • Comptes Rendus Mécanique, March 2010, Elsevier

    Dr Francois Hild

  203. Dialogue essais-modèle pour l’interprétation des liens entre mesure d’auto-échauffement sous chargement cyclique et fatigue polycyclique

    Article • Revue de Métallurgie, February 2010, EDP Sciences

    Dr Francois Hild

  204. Dissipation Measurements in Steel Sheets Under Cyclic Loading by Use of Infrared Microthermography

    Article • Strain, February 2010, Wiley

    Dr Francois Hild

  205. Microstructure-Aided Digital Volume Correlation

    Article • EPJ Web of Conferences, January 2010, EDP Sciences

    Dr Francois Hild

  206. Mechanical characterization of nanostructured thin films at different scales

    Article • EPJ Web of Conferences, January 2010, EDP Sciences

    Dr Francois Hild

  207. Identification of heat source fields from infrared thermography: Determination of ‘self-heating’ in a dual-phase steel by using a dog bone sample

    Article • Mechanics of Materials, January 2010, Elsevier

    Dr Francois Hild

  208. Characterization of Necking Phenomena in High-Speed Experiments by Using a Single Camera

    Article • EURASIP Journal on Image and Video Processing, January 2010, Springer Science + Business Media

    Dr Francois Hild

  209. A Probabilistic Damage Model of the Dynamic Fragmentation Process in Brittle Materials

    Article • January 2010, Elsevier

    Dr Francois Hild

  210. On probabilistic aspects in the dynamic degradation of ductile materials

    Article • Journal of the Mechanics and Physics of Solids, December 2009, Elsevier

    Dr Francois Hild

  211. Complexity of shear localization in a Zr-based bulk metallic glass

    Article • Scripta Materialia, December 2009, Elsevier

    Dr Francois Hild

  212. On the dynamic fragmentation of glass: a meso-damage model

    Article • International Journal of Fracture, November 2009, Springer Science + Business Media

    Dr Francois Hild

  213. Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks

    Article • Journal of Physics D Applied Physics, October 2009, Institute of Physics Publishing

    Dr Francois Hild

  214. 3D analysis from micro-MRI during in situ compression on cancellous bone

    Article • Journal of Biomechanics, October 2009, Elsevier

    Dr Francois Hild

  215. Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images

    Article • Acta Materialia, August 2009, Elsevier

    Dr Francois Hild

  216. Hybrid analytical and extended finite element method (HAX-FEM): A new enrichment procedure for cracked solids

    Article • International Journal for Numerical Methods in Engineering, July 2009, Wiley

    Dr Francois Hild

  217. Identification of adhesive properties in GLARE assemblies using digital image correlation

    Article • Journal of the Mechanics and Physics of Solids, July 2009, Elsevier

    Dr Francois Hild

  218. An extended and integrated digital image correlation technique applied to the analysis of fractured samples. The equilibrium gap method as a mechanical filter

    Article • European Journal of Computational Mechanics, June 2009, Lavoisier

    Dr Francois Hild

  219. Three-dimensional analysis of a compression test on stone wool

    Article • Acta Materialia, June 2009, Elsevier

    Dr Francois Hild

  220. Parameter choice for optimized digital image correlation

    Article • Optics and Lasers in Engineering, June 2009, Elsevier

    Dr Francois Hild

  221. Digital image correlation and biaxial test on composite material for anisotropic damage law identification

    Article • International Journal of Solids and Structures, June 2009, Elsevier

    Dr Francois Hild

  222. Charge redistribution in electrochemically actuated mechanical sensors

    Article • Sensors and Actuators A Physical, May 2009, Elsevier

    Dr Francois Hild

  223. Displacement measurement technique for beam kinematics

    Article • Optics and Lasers in Engineering, March 2009, Elsevier

    Dr Francois Hild

  224. A probabilistic model to predict the formation and propagation of crack networks in thermal fatigue

    Article • International Journal of Fatigue, March 2009, Elsevier

    Dr Francois Hild

  225. Coupled hydromechanical modeling to study the integrity and safety of geological storage of CO2

    Article • Energy Procedia, February 2009, Elsevier

    Dr Francois Hild

  226. Application of the virtual fields method to mechanical characterization of elastomeric materials

    Article • International Journal of Solids and Structures, February 2009, Elsevier

    Dr Francois Hild

  227. On the stored and dissipated energies in heterogeneous rate-independent systems: theory and simple examples

    Article • Continuum Mechanics and Thermodynamics, January 2009, Springer Science + Business Media

    Dr Francois Hild

  228. Integrated Digital Image Correlation for the Identification of Mechanical Properties

    Article • January 2009, Springer Science + Business Media

    Dr Francois Hild

  229. Editorial

    Article • European Journal of Computational Mechanics, January 2009, Taylor & Francis

    Dr Francois Hild

  230. Assessment of Digital Image Correlation Measurement Errors: Methodology and Results

    Article • Experimental Mechanics, December 2008, Springer Science + Business Media

    Dr Francois Hild

  231. Metrology and detonics: analysis of necking

    Article • November 2008, SPIE

    Dr Francois Hild

  232. Self-consistent scheme for toughness homogenization

    Article • International Journal of Fracture, November 2008, Springer Science + Business Media

    Dr Francois Hild

  233. Recent progress in digital image correlation: From measurement to mechanical identification

    Article • Journal of Physics Conference Series, November 2008, Institute of Physics Publishing

    Dr Francois Hild

  234. From digital image correlation to damage law identification

    Article • Journal of Physics Conference Series, November 2008, Institute of Physics Publishing

    Dr Francois Hild

  235. Experimental investigation of localized phenomena using digital image correlation

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, October 2008, Taylor & Francis

    Dr Francois Hild

  236. On the dynamic fragmentation of two limestones using edge-on impact tests

    Article • International Journal of Impact Engineering, September 2008, Elsevier

    Dr Francois Hild

  237. Noise-robust stress intensity factor determination from kinematic field measurements

    Article • Engineering Fracture Mechanics, September 2008, Elsevier

    Dr Francois Hild

  238. HIGH-CYCLE FATIGUE DEVICE FOR LOW STIFFNESS COMPONENTS

    Article • Experimental Techniques, September 2008, Springer Science + Business Media

    Dr Francois Hild

  239. Contrôler une machine d'essai avec une caméra

    Article • Mécanique & Industries, September 2008, EDP Sciences

    Dr Francois Hild

  240. Three-dimensional image correlation from X-ray computed tomography of solid foam

    Article • Composites Part A Applied Science and Manufacturing, August 2008, Elsevier

    Dr Francois Hild

  241. Extended three-dimensional digital image correlation (X3D-DIC)

    Article • Comptes Rendus Mécanique, August 2008, Elsevier

    Dr Francois Hild

  242. Overview of Identification Methods of Mechanical Parameters Based on Full-field Measurements

    Article • Experimental Mechanics, July 2008, Springer Science + Business Media

    Professor Fabrice Pierron, Dr Francois Hild

  243. Digital Image Mechanical Identification (DIMI)

    Article • Experimental Mechanics, April 2008, Springer Science + Business Media

    Dr Francois Hild

  244. Dynamic Fragmentation of an Ultrahigh-Strength Concrete during Edge-On Impact Tests

    Article • Journal of Engineering Mechanics, April 2008, American Society of Civil Engineers (ASCE)

    Dr Francois Hild

  245. A Study of Large Plastic Deformations in Dual Phase Steel Using Digital Image Correlation and FE Analysis

    Article • Experimental Mechanics, February 2008, Springer Science + Business Media

    Dr Francois Hild

  246. Probabilistic Modeling of Crack Networks in Thermal Fatigue

    Article • January 2008, ASME International

    Dr Francois Hild

  247. Mechanical Properties of Crimped Mineral Wools: Identification From Digital Image Correlation

    Article • Journal of Engineering Materials and Technology, January 2008, ASME International

    Dr Francois Hild

  248. A study of localisation in dual-phase high-strength steels under dynamic loading using digital image correlation and FE analysis

    Article • International Journal of Solids and Structures, January 2008, Elsevier

    Dr Francois Hild

  249. Shock enhancement of cellular structures under impact loading: Part II analysis

    Article • Journal of the Mechanics and Physics of Solids, December 2007, Elsevier

    Dr Francois Hild

  250. Shock enhancement of cellular structures under impact loading: Part I Experiments

    Article • Journal of the Mechanics and Physics of Solids, December 2007, Elsevier

    Dr Francois Hild

  251. Shear-band capturing using a multiscale extended digital image correlation technique

    Article • Computer Methods in Applied Mechanics and Engineering, November 2007, Elsevier

    Dr Francois Hild

  252. A Study of Large Plastic Deformations in Dual Phase Steel Using Digital Image Correlation and FE Analysis

    Article • Experimental Mechanics, August 2007, Springer Science + Business Media

    Dr Francois Hild

  253. Stress Intensity Factor Gauging by Digital Image Correlation: Application in Cyclic Fatigue

    Article • Strain, August 2007, Wiley

    Dr Francois Hild

  254. Identification of the electroelastic coupling from full multi-physical fields measured at the micrometre scale

    Article • Journal of Physics D Applied Physics, May 2007, Institute of Physics Publishing

    Dr Francois Hild

  255. Identification of elastic property and loading fields from full-field displacement measurements

    Article • International Journal of Solids and Structures, May 2007, Elsevier

    Dr Francois Hild

  256. CONTROLLING TESTING MACHINES WITH DIGITAL IMAGE CORRELATION

    Article • Experimental Techniques, May 2007, Springer Science + Business Media

    Dr Francois Hild

  257. Identification of a Damage Law by Using Full-field Displacement Measurements

    Article • International Journal of Damage Mechanics, April 2007, SAGE Publications

    Dr Francois Hild

  258. Determination of an HCF criterion by thermal measurements under biaxial cyclic loading

    Article • International Journal of Fatigue, April 2007, Elsevier

    Dr Francois Hild

  259. From pictures to extended finite elements: extended digital image correlation (X-DIC)

    Article • Comptes Rendus Mécanique, March 2007, Elsevier

    Dr Francois Hild

  260. Prediction of self-heating measurements under proportional and non-proportional multiaxial cyclic loadings

    Article • Comptes Rendus Mécanique, February 2007, Elsevier

    Dr Francois Hild

  261. Local anisotropy analysis for non-smooth images

    Article • Pattern Recognition, February 2007, Elsevier

    Dr Francois Hild

  262. A probabilistic model for multiaxial high cycle fatigue

    Article • Fatigue & Fracture of Engineering Materials & Structures, February 2007, Wiley

    Dr Francois Hild

  263. Extended digital image correlation with crack shape optimization

    Article • International Journal for Numerical Methods in Engineering, January 2007, Wiley

    Dr Francois Hild

  264. Measurement and Identification Techniques for Evolving Discontinuities

    Article • January 2007, Springer Science + Business Media

    Dr Francois Hild

  265. Specific effects and deconvolution in submicrometre EPMA: application to binary diffusion

    Article • X-Ray Spectrometry, January 2007, Wiley

    Dr Francois Hild

  266. Effect of Slag Impregnation on Thermal Degradations in Refractories

    Article • Journal of the American Ceramic Society, January 2007, Wiley

    Dr Francois Hild

  267. Material-independent crack arrest statistics: application to indentation experiments

    Article • International Journal of Fracture, December 2006, Springer Science + Business Media

    Dr Francois Hild

  268. “Finite-Element” Displacement Fields Analysis from Digital Images: Application to Portevin–Le Châtelier Bands

    Article • Experimental Mechanics, December 2006, Springer Science + Business Media

    Dr Francois Hild

  269. Digital image correlation analysis of crack behavior in a reinforced concrete beam during a load test

    Article • Canadian Journal of Civil Engineering, November 2006, Canadian Science Publishing

    Dr Francois Hild

  270. Modelling dynamic fragmentation of rocks

    Article • Le Journal de Physique Colloques, July 2006, EDP Sciences

    Dr Francois Hild

  271. Stress intensity factor measurements from digital image correlation: post-processing and integrated approaches

    Article • International Journal of Fracture, July 2006, Springer Science + Business Media

    Dr Francois Hild

  272. Localisation de la déformation par corrélation d'images numériques sur laine de verre crêpée

    Article • Mécanique & Industries, July 2006, EDP Sciences

    Dr Francois Hild

  273. On the formation of crack networks in high cycle fatigue

    Article • Comptes Rendus Mécanique, July 2006, Elsevier

    Dr Francois Hild

  274. Numerical modeling of crack propagation and shielding effects in a striping network

    Article • Nuclear Engineering and Design, May 2006, Elsevier

    Dr Francois Hild

  275. Digital Image Correlation: from Displacement Measurement to Identification of Elastic Properties - a Review

    Article • Strain, May 2006, Wiley

    Dr Francois Hild

  276. Measuring stress intensity factors with a camera: Integrated digital image correlation (I-DIC)

    Article • Comptes Rendus Mécanique, January 2006, Elsevier

    Dr Francois Hild

  277. Strain heterogeneities and local anisotropy in crimped glass wool

    Article • Journal of Materials Science, November 2005, Springer Science + Business Media

    Dr Francois Hild

  278. Modelling of high temperature asymmetric creep behavior of ceramics

    Article • Journal of the European Ceramic Society, July 2005, Elsevier

    Dr Francois Hild

  279. A stress scale in full-field identification procedures: a diffuse stress gauge

    Article • European Journal of Mechanics - A/Solids, May 2005, Elsevier

    Dr Francois Hild

  280. Thermal evaluation of the mean fatigue limit of a complex structure

    Article • March 2005, SPIE

    Dr Francois Hild

  281. A probabilistic two-scale model for high-cycle fatigue life predictions

    Article • Fatigue & Fracture of Engineering Materials & Structures, March 2005, Wiley

    Dr Francois Hild

  282. Digital image correlation used for mechanical tests on crimped glass wool samples

    Article • The Journal of Strain Analysis for Engineering Design, February 2005, SAGE Publications

    Dr Francois Hild

  283. Analyse d'un mode de vieillissement dans un assemblage céramique/métal

    Article • Mécanique & Industries, January 2005, EDP Sciences

    Dr Francois Hild

  284. Identification of the scatter in high cycle fatigue from temperature measurements

    Article • Comptes Rendus Mécanique, October 2004, Elsevier

    Dr Francois Hild

  285. A finite element formulation to identify damage fields: the equilibrium gap method

    Article • International Journal for Numerical Methods in Engineering, August 2004, Wiley

    Dr Francois Hild

  286. Probabilistic Approach to Predict Cracking in Lightly Reinforced Microconcrete Panels

    Article • Journal of Engineering Mechanics, August 2004, American Society of Civil Engineers (ASCE)

    Dr Francois Hild

  287. Material-independent crack arrest statistics

    Article • Journal of the Mechanics and Physics of Solids, July 2004, Elsevier

    Dr Francois Hild

  288. A method to determine the macroscopic toughness scatter of brittle materials

    Article • International Journal of Fracture, January 2004, Springer Science + Business Media

    Dr Francois Hild

  289. Identification de conductivités thermiques et de propriétés élastiques locales par analyse de champsIdentification of thermal conductivities and elastic properties by field analyses

    Article • Mécanique & Industries, December 2003, Elsevier

    Dr Francois Hild

  290. Effect of aluminum reinforcement on the dynamic fragmentation of SiC ceramics

    Article • International Journal of Impact Engineering, November 2003, Elsevier

    Dr Francois Hild

  291. Experiments and modelling of the compressive behaviour of two SiC ceramics

    Article • Mechanics of Materials, October 2003, Elsevier

    Dr Francois Hild

  292. Effective toughness of heterogeneous brittle materials

    Article • European Journal of Mechanics - A/Solids, September 2003, Elsevier

    Dr Francois Hild

  293. On the probabilistic–deterministic transition involved in a fragmentation process of brittle materials

    Article • Computers & Structures, May 2003, Elsevier

    Dr Francois Hild

  294. The role of surface and volume defects in the fracture of glass under quasi-static and dynamic loadings

    Article • Journal of Non-Crystalline Solids, February 2003, Elsevier

    Dr Francois Hild

  295. Long-Term Reliability of Brittle Materials: The Issue of Crack Arrest

    Article • Journal of Engineering Materials and Technology, January 2003, ASME International

    Dr Francois Hild

  296. Specific effects and deconvolution in submicrometre EPMA: application to binary diffusion

    Article • X-Ray Spectrometry, January 2003, Wiley

    Dr Francois Hild

  297. Response of saturated porous media to cyclic thermal loading

    Article • International Journal for Numerical and Analytical Methods in Geomechanics, January 2003, Wiley

    Dr Francois Hild

  298. Identification of damage fields using kinematic measurements

    Article • Comptes Rendus Mécanique, November 2002, Elsevier

    Dr Francois Hild

  299. Analysis of a Multiaxial Test on a C/C Composite by Using Digital Image Correlation and a Damage Model

    Article • Experimental Mechanics, September 2002, Springer Science + Business Media

    Dr Francois Hild

  300. Analysis of mechanical behavior and in-situ observations of Cu-Al-Be SMA under biaxial compressive tests by using DIC

    Article • May 2002, SPIE

    Dr Francois Hild

  301. Article • International Journal of Fracture, January 2002, Springer Science + Business Media

    Dr Francois Hild

  302. Article • International Journal of Fracture, January 2002, Springer Science + Business Media

    Dr Francois Hild

  303. Identification of elastic parameters by displacement field measurement

    Article • Comptes Rendus Mécanique, January 2002, Elsevier

    Dr Francois Hild

  304. Dynamic fragmentation of brittle solids: a multi-scale model

    Article • European Journal of Mechanics - A/Solids, January 2002, Elsevier

    Dr Francois Hild

  305. Isochronous analysis of the behaviour of ceramic-matrix composites under thermomechanical cyclic loading conditions

    Article • Composites Science and Technology, November 2001, Elsevier

    Dr Francois Hild

  306. Digital image correlation used to analyze the multiaxial behavior of rubber-like materials

    Article • European Journal of Mechanics - A/Solids, March 2001, Elsevier

    Dr Francois Hild

  307. A probabilistic approach to predict the very high-cycle fatigue behaviour of spheroidal graphite cast iron structures

    Article • Fatigue & Fracture of Engineering Materials & Structures, February 2000, Wiley

    Dr Francois Hild

  308. On the mechanical behaviour under cyclic loading of ceramic matrix composites

    Article • Materials Science and Engineering A, July 1998, Elsevier

    Dr Francois Hild

  309. The behavior of ceramic-matrix composites under thermo-mechanical cyclic conditions

    Article • Composites Science and Technology, January 1998, Elsevier

    Dr Francois Hild

  310. On the continuum description of damage in fiber-reinforced composites

    Article • January 1998, Elsevier

    Dr Francois Hild

  311. Statistical damage tolerance for cast iron under fatigue loadings

    Article • January 1997, Elsevier

    Dr Francois Hild

  312. Matrix cracking and debonding of ceramic-matrix composites

    Article • International Journal of Solids and Structures, March 1996, Elsevier

    Dr Francois Hild

  313. Fatigue failure maps of heterogeneous materials

    Article • Mechanics of Materials, January 1996, Elsevier

    Dr Francois Hild

  314. Micro-mechanics and continuum damage mechanics

    Article • Archive of Applied Mechanics, September 1995, Springer Science + Business Media

    Dr Francois Hild

  315. Ultimate tensile strength during fatigue of fiber-reinforced ceramic-matrix composites

    Article • Mechanics Research Communications, July 1995, Elsevier

    Dr Francois Hild

  316. Localization and ultimate tensile strength of fiber-reinforced ceramic-matrix composites

    Article • Mechanics Research Communications, July 1994, Elsevier

    Dr Francois Hild

  317. Tensile and flexural ultimate strength of fiber-reinforced ceramic-matrix composites

    Article • International Journal of Solids and Structures, April 1994, Elsevier

    Dr Francois Hild

  318. Uncoupled and coupled approaches to predict macrocrack initiation in fiber reinforced ceramic matrix composites

    Article • Composite Structures, January 1994, Elsevier

    Dr Francois Hild

  319. Localization due to damage in fiber-reinforced composites

    Article • International Journal of Solids and Structures, January 1992, Elsevier

    Dr Francois Hild

  320. Fatigue initiation in heterogeneous brittle materials

    Article • Mechanics Research Communications, November 1991, Elsevier

    Dr Francois Hild

  321. Shock Enhancement due to Shock Front Propagation in Cellular Materials

    Article • Springer Science + Business Media

    Dr Francois Hild

  322. Mechanical Properties of Crimped Mineral Wools: Identification from Digital Image Correlation

    Article • Springer Science + Business Media

    Dr Francois Hild