All Stories

  1. Structural and Microstructural Comparison of Titania–Silica Thin Films Deposited by PE-PVD and Sol–Gel Methods as Potential Functional Coatings
  2. Tailored conditions for facile synthesis of patterned poly(methacrylic acid) brushes via surface-initiated organocatalyzed ATRP
  3. Phage endolysin–polyphosphate/alginate nanocomplexes inhibit staphylococcal biofilms for implant protection
  4. Nano bio-responsive systems avoiding methicillin resistant Staphylococcus aureus colonization on an implant surface
  5. Correction: Fluorescent surface-grafted block copolymer brushes obtained in a versatile post-polymerization approach
  6. Organocatalyzed ATRP meets nature: riboflavin-mediated synthesis of thick polymer brushes under visible light
  7. Thiolated Hyaluronic Acid: A Gateway for Targeted Killing of Staphylococcus aureus on the Race for Surface Colonization
  8. Optimization of the thermoelectric performance of PEDOT:PSS–tetrahedrite (Cu12+xSb4S13) nanocomposites
  9. Cationic polymer nanocapsules with oil cores as versatile water-dispersible photoreactors
  10. Intracellular Uptake of Magnetic Nanocapsules with Ionic Chitosan Shells and Magnetically Triggered Cargo Release
  11. Rapid Replenishment of Phylloquinone in the Plasma and Liver Using Hyaluronan-Based Nanocapsules Reverses Endothelial Dysfunction in Mice
  12. Introduction to Medicinal Chemistry: Synthesis and Investigation of Cross-Linked Alginate Beads with Embedded Micelles as Model Carriers of Hydrophobic Drugs
  13. Fluorescent surface-grafted block copolymer brushes obtained in a versatile post-polymerization approach
  14. Enhancing the reversibility of thermochromism of polydiacetylene-based nanostructures embedded in a natural polymer matrix
  15. Nanoparticles for Space Theranostics
  16. Chitosan-Based Nanocapsules as a Delivery System of Hydrophobic Carnosic Acid, A Model Neuroprotective Drug
  17. Understanding the Morphology and Cross‐Link Density in Silicone Rubber‐Multiwalled Carbon Nanotube Composites via Solvent Transport Studies
  18. Spontaneous Fusion of Core‐Shell Nanocapsules with Oil Cores and Oppositely Charged Polysaccharide Shells
  19. Development of Silicone Rubber-Multiwalled Carbon Nanotube Composites for Strain-Sensing Applications: Morphological, Mechanical, Electrical, and Sensing Properties
  20. Surface-grafted macromolecular nanowires with pedant fluorescein chromophores by dense non-aggregated nanoarchitectonics as versatile photoactive platforms
  21. Applications of surface‐grafted polymer brushes with various architectures
  22. Human erythrocytes under stress. Spectroscopic fingerprints of known oxidative mechanisms and beyond
  23. Self‐Templating Copolymerization to Produce Robust Conductive Nanocoatings Based on Conjugated Polymer Brushes with Implementable Memristive Characteristics
  24. Tailoring Properties of Hyaluronate-Based Core–Shell Nanocapsules with Encapsulation of Mixtures of Edible Oils
  25. Formation of modified chitosan/carrageenan multilayers at silica: Molecular dynamics modeling and experiments
  26. Synthesis, Processing and Applications of Conjugated Oligomers and Polymers 2.0
  27. Aerogels based on cationically modified chitosan and poly(vinyl alcohol) for efficient capturing of viruses
  28. The Influence of Irrigating Solutions on the Penetration of Epoxy AH Plus Sealer in Dentinal Tubules—In Vitro Confocal Microscopy Study
  29. Cellular Response to Bone Morphogenetic Proteins-2 and -7 Covalently Bound to Photocrosslinked Heparin–Diazoresin Multilayer
  30. Surface engineering of mixed conjugated/polyelectrolyte brushes – Tailoring interface structure and electrical properties
  31. Magnetoresistive Properties of Nanocomposites Based on Ferrite Nanoparticles and Polythiophene
  32. Exfoliating layered zeolite MFI into unilamellar nanosheets in solution as precursors for the synthesis of hierarchical nanocomposites and oriented films
  33. Synergistic Effect of Work Function and Acoustic Impedance Mismatch for Improved Thermoelectric Performance in GeTe-WC Composite
  34. Synthetic Route to Conjugated Donor–Acceptor Polymer Brushes via Alternating Copolymerization of Bifunctional Monomers
  35. Precise Stepwise Synthesis of Donor-Acceptor Conjugated Polymer Brushes Grafted from Surfaces
  36. Ladder-like Polymer Brushes Containing Conjugated Poly(Propylenedioxythiophene) Chains
  37. Effect of sodium hypochlorite, isopropyl alcohol and chlorhexidine on the epoxy sealant penetration into the dentinal tubules
  38. Preparation of Homopolymer, Block Copolymer, and Patterned Brushes Bearing Thiophene and Acetylene Groups Using Microliter Volumes of Reaction Mixtures
  39. Topogami: Topologically Linked DNA Origami
  40. Light-promoted synthesis of surface-grafted polymers bearing pyridine groups by metal-free ATRP in microliter volumes
  41. Catalytic activity enhancement in pillared zeolites produced from exfoliated MWW monolayers in solution
  42. The impact of irrigation protocols on epoxy sealer penetration depth in dentinal tubules. Study involving laser confocal microscopy
  43. Double-stranded surface-grafted polymer brushes with ladder-like architecture
  44. Hyaluronic Acid-Based Nanocapsules as Efficient Delivery Systems of Garlic Oil Active Components with Anticancer Activity
  45. Enhanced Thermal Conductivity of Polyamide-Based Nanocomposites Containing Graphene Oxide Sheets Decorated with Compatible Polymer Brushes
  46. Low Dose Curcumin Administered in Hyaluronic Acid-Based Nanocapsules Induces Hypotensive Effect in Hypertensive Rats
  47. DNA Nanocages Go Chiral
  48. Durable Polyelectrolyte Microcapsules with Near-Infrared-Triggered Loading and Nondestructive Release of Cargo
  49. Coacervate Thermoresponsive Polysaccharide Nanoparticles as Delivery System for Piroxicam
  50. Surface-Initiated Photoinduced Iron-Catalyzed Atom Transfer Radical Polymerization with ppm Concentration of FeBr3 under Visible Light
  51. Polymer Capsules with Hydrophobic Liquid Cores as Functional Nanocarriers
  52. Polymer Brushes via Surface-Initiated Electrochemically Mediated ATRP: Role of a Sacrificial Initiator in Polymerization of Acrylates on Silicon Substrates
  53. Surface Etching of 3D Printed Poly(lactic acid) with NaOH: A Systematic Approach
  54. Pioglitazone-Loaded Nanostructured Hybrid Material for Skin Ulcer Treatment
  55. Thermoresponsive Polymer Gating System on Mesoporous Shells of Silica Particles Serving as Smart Nanocontainers
  56. Hydrophobically Coated Superparamagnetic Iron Oxides Nanoparticles Incorporated into Polymer-Based Nanocapsules Dispersed in Water
  57. The effects of alternate irrigation of root canals with chelating agents and sodium hypochlorite on the effectiveness of smear layer removal
  58. Tailoring cellular microenvironments using scaffolds based on magnetically-responsive polymer brushes
  59. Unraveling the nanomechanical properties of surface-grafted conjugated polymer brushes with ladder-like architecture
  60. Nanohydrogels Based on Self-Assembly of Cationic Pullulan and Anionic Dextran Derivatives for Efficient Delivery of Piroxicam
  61. Dynamics of Superparamagnetic Iron Oxide Nanoparticles with Various Polymeric Coatings
  62. Tannic Acid‐Inspired Star‐Like Macromolecules via Temporally Controlled Multi‐Step Potential Electrolysis
  63. One-Step Synthesis of Long Term Stable Superparamagnetic Colloid of Zinc Ferrite Nanorods in Water
  64. Direct analysis from DBS cards surface with Direct Probe Mass Spectrometry – evaluation study
  65. Homogeneous Embedding of Magnetic Nanoparticles into Polymer Brushes during Simultaneous Surface-Initiated Polymerization
  66. Magnetically Navigated Core–Shell Polymer Capsules as Nanoreactors Loadable at the Oil/Water Interface
  67. Polymer brushes grafted from nanostructured zinc oxide layers– spatially controlled decoration of nanorods
  68. Pyrazoline-based colorimetric and fluorescent probe for detection of sulphite
  69. Enhanced hyperthermic properties of biocompatible zinc ferrite nanoparticles with a charged polysaccharide coating
  70. Gradient of zinc content in core–shell zinc ferrite nanoparticles – precise study on composition and magnetic properties
  71. Fabrication of Functional Carbon/Magnetic Nanocomposites as A Promising Model of Utilization of Used Crosslinked Polymers
  72. Dexamethasone-containing bioactive dressing for possible application in post-operative keloid therapy
  73. A Hybrid System for Magnetic Hyperthermia and Drug Delivery: SPION Functionalized by Curcumin Conjugate
  74. Enhancement of the growth of polymer brushes via ATRP initiated from ions-releasing indium tin oxide substrates
  75. Novel bionanocellulose based membrane protected with covalently bounded thin silicone layer as promising wound dressing material
  76. Harmonization of exosome isolation from culture supernatants for optimized proteomics analysis
  77. Anionic Polymer Brushes for Biomimetic Calcium Phosphate Mineralization—A Surface with Application Potential in Biomaterials
  78. Label-Free Infrared Spectroscopy and Imaging of Single Phospholipid Bilayers with Nanoscale Resolution
  79. Design and characterization of silicone micromaterials: A systematic study
  80. Tailored Synthesis of Core-Shell Mesoporous Silica Particles—Optimization of Dye Sorption Properties
  81. First Nano-Infrared Spectroscopy and Imaging Measurements of Single Phospholipid Bilayers
  82. Magnetic nanocomposites based on phosphorus-containing polymers—structural characterization and thermal analysis
  83. Uptake and bioreactivity of charged chitosan-coated superparamagnetic nanoparticles as promising contrast agents for magnetic resonance imaging
  84. Surface Functionalization of Nanocellulose-Based Hydrogels
  85. Robust nanocoatings based on ionic silicones
  86. Photoactive Surface-Grafted Polymer Brushes with Phthalocyanine Bridging Groups as an Advanced Architecture for Light-Harvesting
  87. Chitosan-based nanocapsules of core-shell architecture
  88. Effect of functional groups on the thermal degradation of phosphorus- and phosphorus/nitrogen-containing functional polymers
  89. Biocompatible and fluorescent superparamagnetic iron oxide nanoparticles with superior magnetic properties coated with charged polysaccharide derivatives
  90. Robust oil-core nanocapsules with hyaluronate-based shells as promising nanovehicles for lipophilic compounds
  91. The grafting density and thickness of polythiophene-based brushes determine the orientation, conjugation length and stability of the grafted chains
  92. Grafting of thermosensitive poly(N-isopropylacrylamide) from wet bacterial cellulose sheets to improve its swelling-drying ability
  93. Tailored conditions for controlled and fast growth of surface-grafted PNIPAM brushes
  94. Structure and properties of polyurethane-based powder clear coatings systems modified with hydrotalcites
  95. Enhanced stability of conductive polyacetylene in ladder-like surface-grafted brushes
  96. Polymeric nanocapsules templated on liquid cores as efficient photoreactors
  97. Robust polyelectrolyte microcapsules reinforced with carbon nanotubes
  98. Structure of bovine serum albumin adsorbed on silica investigated by quartz crystal microbalance
  99. Electrokinetic characteristics of HSA dimer and its monolayers at mica
  100. Formation and characterization of (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine)/(1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l-serine) supported lipid bilayers on polyelectrolyte multilayer films
  101. Nanoparticles in endothelial theranostics
  102. Composites prepared from polyurethanes modified with silicone-acrylic nanopowders
  103. Ordered photo- and electroactive thin polymer layers
  104. Iron supply and ferritin are positively related to blood pressure on 24-hour ambulatory monitoring
  105. A facile route to electronically conductive polyelectrolyte brushes as platforms of molecular wires
  106. Nanocapsules templated on liquid cores stabilized by graft amphiphilic polyelectrolytes
  107. Molecular dynamics simulations of proton transverse relaxation times in suspensions of magnetic nanoparticles
  108. Conductive polythiophene-based brushes grafted from an ITO surface via a self-templating approach
  109. T1–T2 Dual-modal MRI contrast agents based on superparamagnetic iron oxide nanoparticles with surface attached gadolinium complexes
  110. Photoactive graft amphiphilic polyelectrolyte: Facile synthesis, intramolecular aggregation and photosensitizing activity
  111. Photoinduced Energy and Electron Transfer in Micellar Multilayer Films
  112. Polyelectrolyte multilayers with perfluorinated phthalocyanine selectively entrapped inside the perfluorinated nanocompartments
  113. Photoinduced charge separation in aqueous solution of porphyrin-quinone end-capped poly(methacrylic acid)
  114. Chitosan-Based Nanocoatings for Hypothermic Storage of Living Cells
  115. Surface-Grafted Polymer Brushes
  116. Pulsatile Releasing Platform of Nanocontainers Equipped with Thermally Responsive Polymeric Nanovalves
  117. Reversible Swelling Process of Sixth-Generation Poly(amido amine) Dendrimers Molecule As Determined by Quartz Crystal Microbalance Technique
  118. Stable aqueous dispersion of superparamagnetic iron oxide nanoparticles protected by charged chitosan derivatives
  119. Hybrid calcium carbonate/polymer microparticles containing silver nanoparticles as antibacterial agents
  120. Coupled engineering and chemical approach to the design of a catalytic structured reactor for combustion of VOCs: Cobalt oxide catalyst on knitted wire gauzes
  121. Biodegradation of new polymer foundry binders composition of poly(acrylic acid)/dextrin
  122. Chitosan-Based Ultrathin Films as Antifouling, Anticoagulant and Antibacterial Protective Coatings
  123. Atomic force microscopy-based molecular studies on the recognition of immunogenic chlorinated ovalbumin by macrophage receptors
  124. Self-templating surface-initiated polymerization: a route to synthesize conductive brushes
  125. Photoinduced electron transfer in multilayer films composed of conjugated polyelectrolyte and amphiphilic copolymer hosting electron acceptor molecules
  126. Stimuli Responsive Polymers for Nanoengineering of Biointerfaces
  127. Porphyrin-Containing Photosensitizer Obtained via Controlled Radical Polymerization
  128. Silica covered porphyrin microstructures obtained in sol–gel processes
  129. Application of gelcasting process in ceria membranes formation
  130. Grafting mixed responsive brushes of poly(N-isopropylacrylamide) and poly(methacrylic acid) from gold by selective initiation
  131. Thermoresponsive multilayer films based on ionic elastin-like recombinamers
  132. Nanoheterogeneous Multilayer Films with Perfluorinated Domains Fabricated Using the Layer-by-Layer Method
  133. Zwitterionically modified hydroxypropylcellulose for biomedical applications
  134. Surface-Grafted Gel-Brush/Metal Nanoparticle Hybrids
  135. Characteristics of Model Polyelectrolyte Multilayer Films Containing Laponite Clay Nanoparticles
  136. Characterization and molecular engineering of surface-grafted polymer brushes across the length scales by atomic force microscopy
  137. “Smart” alginate–hydroxypropylcellulose microbeads for controlled release of heparin
  138. Hypochlorous Acid: A Natural Adjuvant That Facilitates Antigen Processing, Cross-Priming, and the Induction of Adaptive Immunity
  139. Nonlinear growth of multilayer films formed from weak polyelectrolytes
  140. Excited-State Double Proton Transfer in 1 H -Pyrazolo[3,4- b ]quinoline Dimers
  141. Poly(methacrylic acid) Grafts Grown from Designer Surfaces: The Effect of Initiator Coverage on Polymerization Kinetics, Morphology, and Properties
  142. Influence of pH on the Structure of Multilayer Films Composed of Strong and Weak Polyelectrolytes
  143. Robust “one-component” chitosan-based ultrathin films fabricated using layer-by-layer technique
  144. Novel Photosensitizers Based on Polysaccharides - Dextran Modified with Anthracene
  145. Buried, Covalently Attached RGD Peptide Motifs in Poly(methacrylic acid) Brush Layers: The Effect of Brush Structure on Cell Adhesion
  146. Properties of Polyethylene Glycol Supported Tetraarylporphyrin in Aqueous Solution and Its Interaction with Liposomal Membranes
  147. Nanostructured Micellar Films Formed via Layer-by-Layer Deposition of Photoactive Polymer
  148. Preface
  149. Aggregates of Naphthalene Chromophores in Poly(vinylalcohol)- graft -poly(vinylnaphthalene) Pseudomicelles
  150. Accumulation of copper by Acremonium pinkertoniae, a fungus isolated from industrial wastes
  151. Silicone Nanocapsules Templated Inside the Membranes of Catanionic Vesicles
  152. Tautomerism Phenomenon of Pyrazolo[3,4-b]quinoline:  Spectroscopic and Quantum Mechanical Studies
  153. Growing Polymer Brushes on Gold
  154. Tunable Thermoresponsive Polymeric Platforms on Gold by “Photoiniferter”-Based Surface Grafting
  155. Preparation and characterization of macromolecular “hedge” brushes grafted from Au nanowires
  156. Environmentally friendly photosensitizer: starch modified with chlorophyll-type chromophores
  157. Interactions of a smart cationic polyelectrolyte based on hydroxypropylcellulose with an anionic surfactant
  158. Two-dimensional thermoluminescence dosimetry using planar detectors and a TL reader with CCD camera readout
  159. Synthesis and characterization of novel photoactive polymer poly(vinyl alcohol)-graft-poly(vinyl naphthalene)
  160. Novel Photoactive Polymeric Multilayer Films Formed via Electrostatic Self-Assembly
  161. Photosensitized degradation of ethyl parathion pesticide in aqueous solution of anthracene modified photoactive dextran
  162. Novel Water-soluble Photosensitizer Based on Starch and Containing Porphyrin
  163. Geometry computations of xH-pyrazolo[3,4-b]quinolines (x=1,2,9) in the ground state in tautomerism phenomenon
  164. Novel Water-Soluble Photosensitizers from Dextrans
  165. Hydrogen-Bonded Assemblies as a Scaffold for Metal-Containing Nanostructures:  From Zero to Two Dimensions
  166. β-Cyclodextrin Host−Guest Complexes Probed under Thermodynamic Equilibrium:  Thermodynamics and AFM Force Spectroscopy
  167. Synthesis and Properties of Water-Soluble Poly(sodium styrenesulfonate- b lock -5-(4-acryloyloxyphenyl)-10,15,20-tritolylporphyrin) by Nitroxide-Mediated Free Radical Polymerization
  168. Growth of individual hydrogen-bonded nanostructures on gold monolayersElectronic supplementary information (ESI) available: Characterization of compound 2, assemblies 13·(DEB)6, 12·2·(DEB)6 and preparation of monolayers. See http://www.rsc.org/suppdata...
  169. Chain Length and Concentration Dependence of β-Cyclodextrin−Ferrocene Host−Guest Complex Rupture Forces Probed by Dynamic Force Spectroscopy
  170. Functional Group Transfer from Gold Nanoparticles to Flat Gold Surfaces for the Creation of Molecular Anchoring Points on Surfaces
  171. Unraveling the nanostructure of supramolecular assemblies of hydrogen-bonded rosettes on graphite: An atomic force microscopy study
  172. Chemistry on Surface-Confined Molecules:  An Approach to Anchor Isolated Functional Units to Surfaces
  173. Polymeric photosensitizers. Part 4. Synthesis of poly(sodium styrenesulfonate-block-N-vinylcarbazole) by nitroxide-mediated free radical polymerization
  174. Synthesis of Poly(sodium styrenesulfonate- block- vinylnaphthalene) by Nitroxide-Mediated Free Radical Polymerization
  175. Studies of the antenna effect in polymer molecules. 28. Photo-Fries rearrangement of 1-naphthyl acetate in aqueous solutions of poly(sodium styrenesulfonate-co-2-vinylfluorene)
  176. Polymeric photosensitizers: 3. Determination of the copolymerization parameters for N-vinylcarbazole and sodium styrenesulfonate
  177. Photosensitized dechlorination of polychlorinated phenols 2. Photoinduced by poly(sodium styrenesulphonate-co-N-vinylcarbazole) dechlorination of pentachlorophenol in water
  178. Stimuli-Responsive Polymer Brushes