All Stories

  1. Sensor-Assisted Assessment of the Tribological Behavior Patterns of AA7075 Hybrid MMC Reinforced with Multi-Wall Carbon Nanotubes and Pulverized Fuel Ash

    Article • Materials, June 2020, MDPI AG

    Dr SENTHIL KUMARAN S

  2. A case study focusing on investigating the tribological performance of Cu-Sn sintered brake pad of off-high road vehicles

    Article • Journal of Composite Materials, June 2020, SAGE Publications

    Dr SENTHIL KUMARAN S

  3. EFFECT ON STRESS AND THERMAL ANALYSIS OF TAPERED ROLLER BEARINGS

    Article • Journal of Critical Reviews, June 2020, SynthesisHub Advance Scientific Research

    Dr SENTHIL KUMARAN S

  4. PREDICTION OF TENSILE STRENGTH BEHAVIOR OF AA2024 REINFORCED WITH CNT IN THE COMBINATION OF FSW+FSP

    Article • Journal of Critical Reviews, June 2020, SynthesisHub Advance Scientific Research

    Dr SENTHIL KUMARAN S

  5. SOME STUDY ON FATIGUE LIFE OF OPEN COIL SUSPENSION SPRINGS

    Article • Journal of Critical Reviews, June 2020, SynthesisHub Advance Scientific Research

    Dr SENTHIL KUMARAN S

  6. Study of raw and chemically treated Sansevieria ehrenbergii fibers for brake pad application

    Article • Materials Research Express, May 2020, Institute of Physics Publishing

    Dr SENTHIL KUMARAN S

  7. A REVIEW ON LIFE INCREMENT OF TAPERED ROLLER BEARINGS

    Article • Journal of Critical Reviews, April 2020, SynthesisHub Advance Scientific Research

    Dr SENTHIL KUMARAN S

  8. Characterization of Various Properties of Chemically Treated Allium sativum Fiber for Brake Pad Application

    Article • Journal of Natural Fibers, April 2020, Taylor & Francis

    Dr SENTHIL KUMARAN S

  9. DIFFERENT TYPES OF VEGETABLE OILS AND THEIR EFFECT ON SURFACE ROUGHNESS AND CUTTING FORCES IN MACHINING OPERATIONS

    Article • Journal of Critical Reviews, April 2020, SynthesisHub Advance Scientific Research

    Dr SENTHIL KUMARAN S

  10. Development and influence of tribomechanical properties on magnesium based hybrid metal matrix composites-a review

    Article • Materials Research Express, March 2020, Institute of Physics Publishing

    Dr SENTHIL KUMARAN S

  11. Realizing a Novel Friction Stir Processing-Enabled FWTPET Process for Strength Enhancement Using Firefly and PSO Methods

    Article • Materials, February 2020, MDPI AG

    Dr SENTHIL KUMARAN S

  12. Fabrication and Experimental Investigation on Deformation Behaviour of AlSi10Mg Foam-Filled Mild Steel Tubes

    Article • Transactions of the Indian Institute of Metals, February 2020, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  13. Ultrasonic Sensors-Assisted Corrosion Studies on Surface Coated AlSi9Cu3 Alloy Die Castings

    Article • Coatings, January 2020, MDPI AG

    Dr SENTHIL KUMARAN S

  14. Smart assessment of environment assisted cracking of grade 92 material using different test solutions

    Article • Materials Research Express, January 2020, Institute of Physics Publishing

    Dr SENTHIL KUMARAN S

  15. An Investigation of Wear Behavior on AA7075 MMC reinforced with CNT and Fly ash Composites

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr SENTHIL KUMARAN S

  16. An investigation on Piston structural analysis related with experimental cylinder pressures using different biodiesel blend ratios

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr SENTHIL KUMARAN S

  17. An investigation on friction welding of tube to tube plate by using friction stir processing with CNT and Si3N4 composites

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr SENTHIL KUMARAN S

  18. Low Cycle Fatigue behavior of heat treated EN-47 Spring Steel

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr SENTHIL KUMARAN S

  19. NOx, CO & HC control by adopting activated charcoal enriched filter in catalytic converter of diesel engine

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr SENTHIL KUMARAN S

  20. Quality Assessment of Friction Welding using Image Super-resolution via Deep Convolutional Neural Networks

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr SENTHIL KUMARAN S

  21. Thermal Performance Enhancement in a Plain Tube fitted with perforated twisted tape insert using water based Al2O3 Nanofluid

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr SENTHIL KUMARAN S

  22. Corrosion issues in electronic equipments – an overview

    Article • International Journal of Corrosion and Scale Inhibition, December 2019, IFHAN

    Dr SENTHIL KUMARAN S

  23. Corrosion resistance of Ni–Cr alloy in artificial tears in the presence of excess of glucose and sodium chloride

    Article • International Journal of Corrosion and Scale Inhibition, December 2019, IFHAN

    Dr SENTHIL KUMARAN S

  24. Execution of Nonstop Mutable Transmission Structure (NMTS) in Farming Vehicle

    Article • International Journal of Innovative Technology and Exploring Engineering, December 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication, Dr SENTHIL KUMARAN S

  25. Wear Resistance Enhancement of Cutting Tools in CNC Machine

    Article • International Journal of Innovative Technology and Exploring Engineering, December 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication, Dr SENTHIL KUMARAN S

  26. Tool Wear Rate Prediction by using Optimization Techniques

    Article • International Journal of Innovative Technology and Exploring Engineering, December 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication, Dr SENTHIL KUMARAN S

  27. Smart Resilient Security Framework and Solutions for Cloud-driven Digital Supply Networks

    Article • International Journal of Innovative Technology and Exploring Engineering, December 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication, Dr SENTHIL KUMARAN S

  28. Valuable Product For Real World Requirement

    Article • International Journal of Innovative Technology and Exploring Engineering, December 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication, Dr SENTHIL KUMARAN S

  29. Prediction of Tensile Strength in Friction Welding Joins Made of SA213 Tube to SA387 Tube Plate through Optimization Techniques

    Article • Materials, December 2019, MDPI AG

    Dr SENTHIL KUMARAN S

  30. Sensor-Assisted Assessment of the Tribological Behavioral Patterns of Al–SiCp Composites under Various Environmental Temperature Conditions

    Article • Materials, December 2019, MDPI AG

    Dr SENTHIL KUMARAN S

  31. Aerial and Under-water Dronal Communication: Potentials, Issues and Vulnerabilities

    Article • International Journal of Innovative Technology and Exploring Engineering, November 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication, Dr SENTHIL KUMARAN S

  32. Crystal growth behavior and phase stability of rare earth oxides (4 mol.% GdO1.5-4 mol.% SmO1.5) doped zirconia nanopowders

    Article • Journal of Materials Research and Technology, November 2019, Elsevier

    Dr SENTHIL KUMARAN S

  33. Anodic Polarization Behavior of Cold-Worked Austenitic Stainless Steel: A Newer Approach

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  34. Effect of Microstructure and Mechanical Properties of Austenitic Stainless Steel 1.6mm Butt Welded by Plasma Arc Welding

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  35. Experimental Analysis of SA213 Tube to SA387 Tube Plate Welding by Using Close Fit Technique in Absence of Supporting Plate

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  36. Effect of Mechanical Properties and Corrosion Behaviour of Martensitic Stainless Steel 410 1.6mm Butt Welded by Plasma Arc Welding

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  37. X-Ray Diffraction and Microstructure Analysis of EN47 Spring Steel at Various Soaking Period of Time

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  38. Formability Analyses on Single Point Incremental Sheet Forming Process on Aluminum 1050

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  39. Effect of Soaking Time on Evolution of Microstructure and Hardness during Annealing of EN-47 Spring Steel

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  40. Metal Joining Technique of SA 213 Tube and SA 387 Tube Plate Grade Materials Using Backing Block by Clearance Fit Condition

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Dr SENTHIL KUMARAN S, Sekarapandian Natarajan

  41. Optimization of Process Parameters Using Surface Response Methodology for Laser Welding of Titanium Alloy

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Muralimohan Cheepu, Nageswara rao Palukuri, Dr SENTHIL KUMARAN S

  42. Effect of Process Parameters and Heat Input on Weld Bead Geometry of Laser Welded Titanium Ti-6Al-4V Alloy

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Muralimohan Cheepu, Nageswara rao Palukuri, Dr SENTHIL KUMARAN S

  43. The Influence of Gas Tungsten Arc Welding Parameters on Mechanical and Microstructure Properties of the TC4 Titanium Alloy

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Muralimohan Cheepu, Nageswara rao Palukuri, Dr SENTHIL KUMARAN S

  44. Characterization of Microstructure and Mechanical Properties of AA2219-O and T6 Friction Stir Welds

    Article • Materials Science Forum, August 2019, Trans Tech Publications

    Nageswara rao Palukuri, Muralimohan Cheepu, Dr SENTHIL KUMARAN S

  45. Friction material composite: types of brake friction material formulations and effects of various ingredients on brake performance–a review

    Article • Materials Research Express, May 2019, Institute of Physics Publishing

    Dr SENTHIL KUMARAN S

  46. Role of Alloy Chemistry on Stability of Passive Films in Austenitic Stainless Steel

    Article • Journal of Materials Engineering and Performance, May 2019, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  47. Stress Corrosion Cracking of AZ91 + xCe Alloy Using Proof Ring Test in ASTM D1384 and NaCl-K2CrO4 Solutions

    Article • Journal of Materials Engineering and Performance, April 2019, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  48. Tribological performance evaluation of fused mullite-reinforced hybrid composite brake pad for defence application

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, March 2019, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  49. Effects of plastic strains on passivation behavior of different austenitic stainless steel grades

    Article • Materials Research Express, November 2018, Institute of Physics Publishing

    Dr SENTHIL KUMARAN S

  50. Effects of in-grain misorientation developments in sensitization of 304 L austenitic stainless steels

    Article • Materials Research Express, October 2018, Institute of Physics Publishing

    Dr SENTHIL KUMARAN S

  51. An investigation of mechanical properties of madar fiber reinforced polyester composites for various fiber length and fiber content

    Article • Materials Research Express, October 2018, Institute of Physics Publishing

    Dr SENTHIL KUMARAN S

  52. An Examination of Seamless Ferritic tube and Austenitic alloy tube plate joining by Friction Welding process

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr SENTHIL KUMARAN S

  53. An investigation of Boiler Grade Tube and Tube Plate without block by using friction welding process

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr SENTHIL KUMARAN S

  54. Friction Welding Joints of SA 213 Tube to SA 387 Tube Plate Boiler Grade Materials by using Clearance and Interference Fit Method

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr SENTHIL KUMARAN S

  55. Garnet and Al-flyash composite under dry sliding conditions

    Article • Journal of Composite Materials, November 2017, SAGE Publications

    Dr SENTHIL KUMARAN S

  56. Erratum to “Dissimilar metal study on C44300 tube to AA7075 -T651 tube plate with and without thread by FWTPET process” [31 (5) (2017) 2523~2533]

    Article • Journal of Mechanical Science and Technology, July 2017, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  57. Dissimilar metal study on C44300 tube to AA7075 -T651 tube plate with and without thread by FWTPET process

    Article • Journal of Mechanical Science and Technology, May 2017, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  58. An investigation of abrasive and erosion behaviour of AA 2618 reinforced with Si3N4, AlN and ZrB2 in situ composites by using optimization techniques

    Article • Archives of Civil and Mechanical Engineering, January 2017, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  59. A study on backing block arrangement of dissimilar metal joining process of seamless ferritic and austenitic alloy by using an external tool

    Article • Journal of Alloys and Compounds, December 2016, Elsevier

    Dr SENTHIL KUMARAN S

  60. An Optimization of Erosive Wear on AA 2618 Reinforced with SI3N4, AlN and ZrB2 In Situ Composites

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  61. Experimental Study on Friction Welding of without Backing Block of Commercial Copper Tube without Hole (WoH) to AL 2025 Tube Plate by Using Clearance Fit Method

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  62. FWTPET Investigation on SA213 Tube to SA387 Tube Plate

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  63. Dissimilar Study on Friction Welding of AA 2025 Tube Plate to Copper Tube Using an External Tool

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  64. Investigation of the inhibitive effect of Tween 20 self assembling nanofilms on corrosion of carbon steel

    Article • Journal of Alloys and Compounds, August 2016, Elsevier

    Dr SENTHIL KUMARAN S

  65. Aerospace application on Al 2618 with reinforced – Si3N4, AlN and ZrB2 in-situ composites

    Article • Journal of Alloys and Compounds, July 2016, Elsevier

    Dr SENTHIL KUMARAN S

  66. An investigation on mechanical property of commercial copper tube to aluminium 2025 tube plate by FWTPET process

    Article • Journal of Alloys and Compounds, July 2016, Elsevier

    Dr SENTHIL KUMARAN S

  67. An investigation on SA 213 tube to SA 387 tube plate with backing block arrangement in friction welding process

    Article • Alexandria Engineering Journal, June 2016, Elsevier

    Dr SENTHIL KUMARAN S

  68. An investigation of metal flow during friction welding of SA 213 tube to SA 387 tube plate with backing block

    Article • Alexandria Engineering Journal, June 2016, Elsevier

    Dr SENTHIL KUMARAN S

  69. An investigation on compression strength analysis of commercial aluminium tube to aluminium 2025 tube plate by using TIG welding process

    Article • Journal of Alloys and Compounds, May 2016, Elsevier

    Dr SENTHIL KUMARAN S

  70. Optimization of friction welding by taguchi and ANOVA method on commercial aluminium tube to Al 2025 tube plate with backing block using an external tool

    Article • Journal of Mechanical Science and Technology, May 2016, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  71. High temperature investigation on EDM process of Al 2618 alloy reinforced with Si3N4, ALN and ZrB2 in-situ composites

    Article • Journal of Alloys and Compounds, April 2016, Elsevier

    Dr SENTHIL KUMARAN S

  72. Wear behaviour of Al 2618 alloy reinforced with Si3N4, AlN and ZrB2 in situ composites at elevated temperatures

    Article • Alexandria Engineering Journal, March 2016, Elsevier

    Dr SENTHIL KUMARAN S

  73. An analysis of mechanical properties and optimization of EDM process parameters of Al 4032 alloy reinforced with Zrb2 and Tib2 in-situ composites

    Article • Journal of Alloys and Compounds, March 2016, Elsevier

    Dr SENTHIL KUMARAN S

  74. An investigation on thermal and friction effect produced by friction welding of SA 213 tube to SA 387 tube plate

    Article • Alexandria Engineering Journal, March 2016, Elsevier

    Dr SENTHIL KUMARAN S

  75. Mining environment applications on Al 4032 – Zrb 2 and Tib 2 in-situ composites

    Article • Journal of Alloys and Compounds, February 2016, Elsevier

    Dr SENTHIL KUMARAN S

  76. An investigation on SA 213-Tube to SA 387-Tube plate using friction welding process

    Article • Journal of Mechanical Science and Technology, January 2016, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  77. Characterization and analysis of compression load behaviour of aluminium alloy foam under the diverse strain rate

    Article • Journal of Alloys and Compounds, January 2016, Elsevier

    Dr SENTHIL KUMARAN S

  78. Interfacial microstructure and optimization of friction welding by Taguchi and ANOVA method on SA 213 tube to SA 387 tube plate without backing block using an external tool

    Article • Journal of Alloys and Compounds, January 2016, Elsevier

    Dr SENTHIL KUMARAN S

  79. An investigation of mechanical properties and corrosion resistance of Al2618 alloy reinforced with Si3N4, AlN and ZrB2 composites

    Article • Journal of Alloys and Compounds, December 2015, Elsevier

    Dr SENTHIL KUMARAN S

  80. An investigation of mechanical properties and material removal rate, tool wear rate in EDM machining process of AL2618 alloy reinforced with Si3N4, AlN and ZrB2 composites

    Article • Journal of Alloys and Compounds, November 2015, Elsevier

    Dr SENTHIL KUMARAN S

  81. Friction welding of 304 austenitic stainless steel tube to tube plate joints using an external tool

    Article • Journal of Advanced Mechanical Design Systems and Manufacturing, January 2015, Japan Society of Mechanical Engineers

    Dr SENTHIL KUMARAN S

  82. Effect of projection on joint properties of friction welding of tube-to-tube plate using an external tool

    Article • The International Journal of Advanced Manufacturing Technology, August 2014, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  83. An investigation of tool wear using acoustic emission and genetic algorithm

    Article • Journal of Vibration and Control, February 2014, SAGE Publications

    Dr SENTHIL KUMARAN S

  84. Eco-friendly aspects associated with friction welding of tube-to-tube plate using an external tool process

    Article • International Journal of Sustainable Engineering, June 2012, Taylor & Francis

    Dr SENTHIL KUMARAN S

  85. Interfacial Microstructure and Strength of Friction Welding of Steel Tube to Aluminium Tube Plate Using an External Tool

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Dr SENTHIL KUMARAN S

  86. Optimization of Friction Welding of Tube-to-Tube Plate Using an External Tool with Filler Plate

    Article • Journal of Materials Engineering and Performance, August 2011, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  87. Suitability of Friction Welding of Tube to Tube Plate Using an External Tool Process for Different Tube Diameters-A Study

    Article • Experimental Techniques, June 2011, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  88. Friction welding of Cu-tube to Al-tube plate using an external tool

    Article • Transactions of the Indian Institute of Metals, June 2011, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  89. Optimization of friction welding of tube-to-tube plate using an external tool by Taguchi method and genetic algorithm

    Article • The International Journal of Advanced Manufacturing Technology, April 2011, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  90. Effect of Tube Preparations on Joint Strength in Friction Welding of Tube-to-Tube Plate Using an External Tool Process

    Article • Experimental Techniques, February 2011, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  91. Optimization of friction welding of tube to tube plate using an external tool by hybrid approach

    Article • Journal of Alloys and Compounds, February 2011, Elsevier

    Dr SENTHIL KUMARAN S

  92. Optimization of friction welding of tube to tube plate using an external tool

    Article • Structural and Multidisciplinary Optimization, April 2010, Springer Science + Business Media

    Dr SENTHIL KUMARAN S

  93. Crystal growth and characterization of KY(WO4)2 and KGd(WO4)2 for laser applications

    Article • Journal of Crystal Growth, July 2006, Elsevier

    Dr SENTHIL KUMARAN S