All Stories

  1. Hybrid fiber-reinforced polymer structural frames with ductile gusset connections: A new paradigm in structural design
  2. The modelling and design optimisation of sawdust, garnet waste, and palm oil fuel ash-based hybrid asphalt binders using response surface methodology
  3. Optimizing toughness, ductility, and sustainability in strain-hardening cementitious composites: The synergistic effect of ultrafine palm oil fuel ash
  4. Integrating Flood Risk Management into Development Projects: A Conceptual Framework for Resilient Urban Planning
  5. Effectiveness of elephant grass roots in improving soil shear strength for slope reinforcement
  6. Rheological Properties and Rutting Performance of Waste-incorporated Hybrid Asphalt Binders
  7. Laboratory evaluation of micro and nano eggshell powder on physical and rheological properties of bitumen
  8. Performance analysis of sustainable reinforced concrete using chemically treated betel nut fiber
  9. ASSESSMENT OF SUBSURFACE FEATURES AND POTENTIAL OF GROUNDWATER DELINEATION USING 2-DIMENSIONAL ELECTRICAL RESISTIVITY IMAGING METHOD
  10. Sustainable asphalt modification using palm oil fuel ash, garnet waste, and sawdust: performance and correlation analysis
  11. Green and Resilient: Strategies for Next-Generation Infrastructure
  12. Nanosilica-modified binder in porous asphalt under varied ageing conditions
  13. VOLUMETRIC PROPERTIES OF STONE MASTIC ASPHALT MIXTURE INCORPORATED WITH NANO SILICA AND GLASS FIBER
  14. A comprehensive review of the utilization of alternative binding properties in the construction of asphalt pavements
  15. An innovative stiffened I-shaped damper to improve the behavior of the concentrically braced frames
  16. Analysis of Palm Oil Fuel Ash, Garnet Waste and Sawdust as Modified Asphalt Binders and Mixtures
  17. Mechanical and Microstructural Characteristics of High-Strength Self-Compacting Concrete (HSSCC) with Optimal Silica Fume and Fly Ash Cement Replacement
  18. Retraction notice to ‘Analytical review on potential use of waste engine oil in asphalt and pavement engineering’ [Case Stud. Constr. Mater., 20 (2024) e02930]
  19. Application of bentonite in cement-based composites: A review of current status, challenges and future prospects
  20. Disaster and Rehabilitation in Civil Engineering
  21. Exploring the Factors and Impacts of Flash Floods Vulnerability in Various Areas of Malaysia: A Content Analysis
  22. Metaheuristic algorithms applied in ANN salinity modelling
  23. Potential of Palm Oil Fuel Ash, Garnet Waste and Sawdust in Modified Asphalt Binder and Their Correlation
  24. RETRACTED: Analytical review on potential use of waste engine oil in asphalt and pavement engineering
  25. Innovative Materials to Build a Better Infrastructure Development
  26. Editorial: 2022 Retrospective: structural materials
  27. Exploring the chemical properties and microstructural characterisations of hybrid asphalt binders for enhanced performance
  28. Improving the behavior of the CBF system using an innovative box section damper: Experimental and numerical study
  29. MECHANICAL PERFORMANCE OF TWO DIFFERENT GRADATIONS OF POROUS ASPHALT MIXTURES INCORPORATING BAMBOO FIBER
  30. Performance of blockboard using particle composite bagasse waste as core layer materials
  31. Cymbopogon nardus Leaf Ash as an Alternative Material for Enhancing Concrete Strength
  32. The effect of containing Al2O3 microparticles in different matrix polymers on properties of pineapple fiber-reinforced composites
  33. Evaluating and quantifying the variations and sensitivity in asphalt-filler interaction indices
  34. Porous asphalt mixtures enriched with bamboo fibers as a new approach for future sustainable construction
  35. Study on the Modification Effect and Mechanism of a Compound Mineral Additive and Basalt Fiber on Coal Gangue Concrete
  36. Innovative geopolymer-based cold asphalt emulsion mixture as eco-friendly material
  37. Sumatra-fault Earthquake Source Variation for Analysis of Liquefaction in Aceh, Northern Indonesia
  38. The Use of Waste Polymers in Asphalt Mixtures: Bibliometric Analysis and Systematic Review
  39. Investigating the Potential of High-Density Polyethylene and Nano Clay Asphalt-Modified Binders to Enhance the Rutting Resistance of Asphalt Mixture
  40. Characterisation of Ground Coal Bottom Ash With Different Grinding Times
  41. Use of calcium carbonate nanoparticles in production of nano-engineered foamed concrete
  42. Porous Asphalt Mixtures Enriched with Bamboo Fibers as a New Approach for Future Sustainable Construction
  43. Seismic Performance of Linked-Column Frame; Multi-Parameter Study
  44. An innovative shear links as dampers compound of shear plates and round HSS sections
  45. Effect of Evotherm 3G on the performance of asphalt mixture
  46. The Use of Vacuum Residue as a Potential Rejuvenator in Reclaimed Asphalt Pavement: Physical, Rheological, and Mechanical Traits Analysis
  47. Moisture sensitivity and heavy metal leaching potentials of asphalt mixtures incorporating rubber modifiers and wax-based admixture
  48. Potential of Palm Oil Fuel Ash as a Partial Replacement of Fine Aggregates for Improved Fresh and Hardened Mortar Performance
  49. Efficiency of Waste as Cement Replacement in Foamed Concrete—A Review
  50. Evaluation of properties of hybrid laminated composites with different fiber layers based on Coir/Al2O3 reinforced composites for structural application
  51. Effect of Warm Mix Asphalt (WMA) Antistripping Agent on Performance of Waste Engine Oil-Rejuvenated Asphalt Binders and Mixtures
  52. Utilizing Low Yield Point Steel to Improve the Behavior of the I-Shaped Shear Links as Dampers
  53. Statistical Approach Model to Evaluate Permanent Deformation of Steel Fiber Modified Asphalt Mixtures
  54. Challenges of post-conflict urban transportation reconstruction in Mogadishu, Somalia
  55. Optimization of Particle Size and Ramie Fiber Ratio on Hybrid Bio Panel Production from Oil Palm Trunk as Thermal Insulation Materials
  56. Synthesis of Metakaolin Based Alkali Activated Materials as an Adsorbent at Different Na2SiO3/NaOH Ratios and Exposing Temperatures for Cu2+ Removal
  57. The Characterisation of Fracture Resistance of Asphalt Mixtures Containing Rubber Modifiers and a Wax-Based Additive
  58. Experimental and Numerical Study on an Innovative Trapezoidal-Shaped Damper to Improve the Behavior of CBF Braces
  59. Extraction and Characterisation of Maltene from Virgin Asphalt as a Potential Rejuvenating Agent
  60. Cleaning effect on clogged porous asphalt mixture
  61. Engineering properties of porous asphalt mixture incorporating kenaf fiber
  62. Influence of Sawdust Ash as filler in asphalt mixture
  63. Mechanical performance of dense-graded asphalt mixture incorporating steel fiber
  64. Performance of dense graded asphalt incorporating cellulose fiber
  65. Effect of Covid-19 lockdown on mobility and traffic accidents in Malaysia
  66. Performance of permeable concrete pavement containing recycled aggregate
  67. Numerical Study of Seismic Response on Displacement in Long-Span Thin-Shell Structures as Building Foundations Under Seismic Excitation
  68. Assessment of Porous Asphalt with Nanosilica Modified Binder Under Various Ageing Condition
  69. Estimating the Long-Term Changes of River Water Level Using River-Climate Statistical Relationship
  70. Porous Asphalt Mixtures Enriched with Bamboo Fibers as a New Approach for Future Sustainable Construction
  71. Performance of glass powder as bitumen modifier in hot mix asphalt
  72. Shear strength performance of dredged sediment soil stabilized with lime
  73. Mass transfer analysis of total nitrogen adsorption from river water onto tea waste (Camellia Sinensis)
  74. Strength and Durability of Sustainable Self-Consolidating Concrete with High Levels of Supplementary Cementitious Materials
  75. Geopolymer Ceramic Application: A Review on Mix Design, Properties and Reinforcement Enhancement
  76. Potential of industrial By-Products based geopolymer for rigid concrete pavement application
  77. Prediction Model of the Coring Asphalt Pavement Performance through Response Surface Methodology
  78. Performance of High Strength Concrete Containing Palm Oil Fuel Ash and Metakaolin as Cement Replacement Material
  79. Effect of Coral Aggregates of Blended Cement Concrete Subjected to Different Water Immersion Condition
  80. Performance of Palm Oil Clinker Lightweight Aggregate Concrete Comprising Spent Garnet as Fine Aggregate Replacement
  81. The Influence of Nano Titanium as Bitumen Modifier in Stone Mastic Asphalt
  82. Marshall stability of porous asphalt mixture incorporating kenaf fiber
  83. Performance of rubberized concrete-filled hollow steel column under monotonic and cyclic loadings
  84. Properties of stone mastic asphalt incorporating nano titanium as binder's modifier
  85. The impact of microwave treatment on the chemical properties of sewerage sludge
  86. Linear viscoelastic response of semi-circular asphalt sample based on digital image correlation and XFEM
  87. Effectiveness and efficiency of nano kaolin clay as bitumen modifier
  88. Nano kaolin clay as bitumen modifier for sustainable development
  89. Prediction of rutting resistance of porous asphalt mixture incorporating nanosilica
  90. A Review of Asphaltic Crack Healing Approaches and Its Mechanism
  91. Ultra High-Performance Concrete as Alternative Repair Method: A Review
  92. THE EFFECT OF UTILIZING SILICA FUME AND EGGSHELL ASH ON THE GEOTECHNICAL PROPERTIES OF SOFT KAOLIN CLAY
  93. A new approach to enhance the reclaimed asphalt pavement features: role of maltene as a rejuvenator
  94. Effects of maltene on the attributes of reclaimed asphalt pavement: Performance optimisation
  95. Physicomechanical Assessments and Heavy Metals’ Leaching Potential of Modified Asphalt Binders Incorporating Crumb Rubber and Tin Slag Powders
  96. Editorial: Trends and Advanced Materials for Pavement and Road Infrastructure
  97. Effect of optimum utilization of silica fume and eggshell ash to the engineering properties of expansive soil
  98. Evaluation on the rheological and mechanical properties of concrete incorporating eggshell with tire powder
  99. A Review on the Durability of Recycled Asphalt Mixtures Embraced with Rejuvenators
  100. CHARACTERIZATION OF MORTAR WITH PENNISETUM PURPUREUM ASHES AS CEMENT REPLACEMENT MATERIAL
  101. Influence of coal ash on the concrete properties and its performance under sulphate and chloride conditions
  102. LABORATORY INVESTIGATION OF COAL BOTTOM ASH MODIFIED WARM MIX ASPHALT
  103. Thermal performance of cooling strategies for asphalt pavement: A state-of-the-art review
  104. Relation between Density and Compressive Strength of Foamed Concrete
  105. Behaviour of Hot Mix Asphalt Incorporating Untreated and Treated Waste Cooking Oil
  106. Characterisation of microstructural and sound absorption properties of porous asphalt subjected to progressive clogging
  107. Design of Experiment on Concrete Mechanical Properties Prediction: A Critical Review
  108. Image Analysis of Surface Porosity Mortar Containing Processed Spent Bleaching Earth
  109. A review on rejuvenating materials used with reclaimed hot mix asphalt
  110. Impacts of Maltene on the Wettability and Adhesion Properties of Rejuvenated Asphalt Binder
  111. Effect of Aluminium Powder on Kaolin-Based Geopolymer Characteristic and Removal of Cu2+
  112. Physical, rheological and chemical features of recycled asphalt embraced with a hybrid rejuvenating agent
  113. Properties of mortar with fine eggshell powder as partial cement replacement
  114. The tailored traits of reclaimed asphalt pavement incorporating maltene: performance analyses
  115. Evaluation of the sulphate resistance of foamed concrete containing processed spent bleaching earth
  116. The influence of nano-carbon from coconut shell ash as modifier on the properties of bitumen
  117. INFLUENCE OF PALM OIL BIOMASS CLINKER AND EMPTY FRUIT BUNCH FIBERS ON CONCRETE PROPERTIES
  118. Morphological and Physical Characteristic of Stone Mastic Asphalt Mixture Incorporating Nano Silica
  119. Rejuvenation of Hot Mix Asphalt Incorporating High RAP Content: Issues to Consider
  120. Impacts of recycled crumb rubber powder and natural rubber latex on the modified asphalt rheological behaviour, bonding, and resistance to shear
  121. Ambient noise analysis for characterizing sub-surface dynamic parameters
  122. An Investigation on Urban Circle Rail Transit: A Case Study on the Alignment of Mass Rapid Transit 3 (Circle Line)
  123. Assessment of safety performance level on simple urban residential building: Case study at Bogor city Indonesia
  124. Effect of Dried Sewage Sludge on Compressive Strength of Concrete
  125. Effect of temperatures and loading rates on direct shear strength of asphaltic concrete using layer-parallel direct shear test
  126. Experimental Study on Flexural Behaviour of Reinforced Foamed Concrete Square Hollow Beam
  127. Finite Element Analysis on the Effect of Hollow Section on the Strength of Foamed Concrete Beam
  128. Liquefaction Potential Analysis of Reusep Prestress Bridge in Pidie Jaya due to 6.4 Mw Earthquake
  129. Mechanical Performance of Stone Mastic Asphalt Incorporating Steel Fiber
  130. Nanoparticle in Asphalt Binder: A State-of-The-Art Review
  131. Performance of Coir Fiber Addition for Clay as a Sub-Grade for Pavement Design
  132. Restoration of Aged Bitumen Properties Using Maltenes
  133. Selection of Best Consultant by using Analytical Hierarchy Process (AHP)
  134. Selection of Contractor by Using Analytical Hierarchy Process (AHP)
  135. Selection of Method in Construction Industry by using Analytical Hierarchy Process (AHP)
  136. Short Term Aging Effect of Asphaltic Concrete Incorporating Charcoal Ash from Coconut Shell
  137. Site-specific ground response analysis at a site in the affected area of the 2016 Pidie Jaya earthquake
  138. Stability and Resilient Modulus of Porous Asphalt Incorporating Steel Fiber
  139. Strength Properties of Porous Concrete Pavement Blended with Nano Black Rice Husk Ash
  140. Strength and Porosity of Porous Concrete Pavement Containing Nano Black Rice Husk Ash
  141. The Influence of Steel Slag as Alternative Aggregate in Permeable Concrete Pavement
  142. Volumetric Properties and Resilient Modulus of Stone Mastic Asphalt incorporating Cellulose Fiber
  143. Waste Cooking Oil as Bio Asphalt Binder: A Critical Review
  144. Waste Tyre Rubber Application in Semi-Rigid and Flexible Pavement
  145. Investigation on Compatibility Property Between Aggregates and Bitumen Modified with Untreated and Treated Waste Cooking Oil
  146. Properties of cup lump rubber modified asphalt binder
  147. International Conference on Agricultural Technology, Engineering, and Environmental Sciences
  148. MECHANICAL PERFORMANCE OF ASPHALT MIXTURE CONTAINING CUP LUMP RUBBER
  149. Physical, chemical and morphology characterisation of nano ceramic powder as bitumen modification
  150. Flexural strength properties of porous concrete pavement incorporating nano black rice husk ash
  151. Properties of bitumen modified with latex
  152. Short-term effects of sulphate and chloride on the concrete containing coal bottom ash as supplementary cementitious material
  153. A comparative study of Kuantan bauxite mineralogy as potential material in civil engineering
  154. Effect of compaction temperature on porous asphalt performance
  155. Effect of compaction temperature on the performance of dense-graded asphalt mixture
  156. Moisture susceptibility of porous asphalt mixture with Nano silica modified asphalt binder
  157. Overview of Monsoon Induced Coastal Erosion Disaster in Peninsular Malaysia Based On Mass-Media Reports
  158. Performance of Nano kaolin clay as modified binder in porous asphalt mixture
  159. Permeability coefficient of porous asphalt mixture containing coconut shells and fibres
  160. Porosity and permeability properties of Nano black rice hush ash in porous concrete pavement
  161. Rutting resistance of untreated and treated waste cooking oil in bitumen after aging condition
  162. Stability and rutting resistance of porous asphalt mixture incorporating coconut shells and fibres
  163. Stability and voids properties of hot mix asphalt containing black rice husk ash
  164. Voids Characteristic of Hot Mix Asphalt Containing Waste Cooking Oil
  165. Porosity and density characteristic of double-layer concrete paving blocks incorporating rubber granules
  166. Causes of crane accidents at construction sites in Malaysia
  167. Causes of fatal construction accidents in Malaysia
  168. Correlation between functional and structural properties of flexible pavement
  169. Creep and resilient modulus properties of asphaltic concrete containing black rice husk ash
  170. Effects of black rice husk ash on asphalt mixture under aging condition
  171. Engineering properties of asphalt binder modified with cup lump rubber
  172. Engineering properties of crumb rubber modified dense-graded asphalt mixtures using dry process
  173. Influence of pavement condition towards accident number on Malaysian highway
  174. Marshall stability properties of asphaltic concrete with kaolin clay under aging
  175. Noncompliance of the occupational safety and health legislation in the Malaysian construction industry
  176. Performance of asphalt mixture incorporating kaolin clay at different aging
  177. Thermal performance of waste materials as aggregate replacement in asphalt pavement
  178. Effects of Nano-kaolin clay on the rutting resistance of asphalt binder
  179. Physical and chemical properties of cement with nano black rice husk ash
  180. Coal bottom ash as a sustainable supplementary cementitious material for the concrete exposed to seawater
  181. A Review on Potential Use of Coal Bottom Ash as a Supplementary Cementing Material in Sustainable Concrete Construction
  182. Effect of Black Rice Husk Ash on Asphaltic Concrete Properties under Aging Condition
  183. Assessing the Bond Strength of Hot Mix Asphalt Pavement for Wearing and Binder Courses
  184. Effect of grinding period on physical properties of modified bitumen using palm oil fuel ash (POFA)
  185. Influence of diatomite filler on rheological properties of porous asphalt mastic
  186. Mechanical performance of asphalt mixture containing nano-charcoal coconut shell ash
  187. Effect of different sizes of palm oil fuel ash (POFA) towards physical properties of modified bitumen
  188. Effects of nanocharcoal coconut-shell ash on the physical and rheological properties of bitumen
  189. Creep stiffness and voids characteristic of asphalt mixture with waste cooking oil after aging
  190. Performance of nanoceramic powder on the chemical and physical properties of bitumen
  191. Mechanical performance of asphaltic concrete incorporating untreated and treated waste cooking oil
  192. Effect of Nano Silica on the Physical Property of Porous Concrete Pavement
  193. Effect of Charcoal Ash Coconut Shell from Waste Material at Different Size on the Physical Properties of Bitumen
  194. Voids characteristics of asphaltic concrete containing coconut shell
  195. Effects of Waste Plastic on the Physical and Rheological Properties of Bitumen
  196. Strength and Properties of Concrete Pavement Incorporating Multiple Blended Binders
  197. Microstructure and physical properties of nano charcoal ash as binder
  198. A Review: The Effect of Grinded Coal Bottom Ash on Concrete
  199. Stability and Volumetric Properties of Asphalt Mixture Containing Waste Plastic
  200. Effect of Waste Plastic as Bitumen Modified in Asphalt Mixture
  201. Effect of black rice husk ash on the physical and rheological properties of bitumen
  202. Performance of asphaltic concrete incorporating styrene butadiene rubber subjected to varying aging condition
  203. Fire resistance of ultra-high performance fibre reinforced concrete due to heating and cooling
  204. Chemical modification of waste cooking oil to improve the physical and rheological properties of asphalt binder
  205. Evaluation of bond strength between fire-damaged normal concrete substance and ultra-high-performance fiber-reinforced concrete as a repair material
  206. PRODUCTION OF BIODIESEL FROM PALM OIL USING EGG SHELL WASTE AS HETEROGENEOUS CATALYST
  207. Effects of mixture design variables on rubber–bitumen interaction: properties of dry mixed rubberized asphalt mixture
  208. RHEOLOGICAL PROPERTIES OF STYRENE BUTADIENE RUBBER MODIFIED BITUMEN BINDER
  209. Effect of Antioxidant Characteristic from Waste Cooking Oil in Modified Asphalt Binder
  210. Chemical Identification of Waste Cooking Oil as Additive in Bitumen
  211. Performance of Waste Cooking Oil in Asphalt Binder Modification
  212. The Influence of Coconut Shell as Coarse Aggregates in Asphalt Mixture
  213. The Performance of Styrene Butadiene Rubber on the Engineering Properties of Asphaltic Concrete AC14
  214. Performance of Straight Steel Fibres Reinforced Alkali Activated Concrete
  215. Chloride penetration of RHA concrete under marine environment
  216. ANALYSIS OF CAR FOLLOWING HEADWAY ALONG MULTILANE HIGHWAY
  217. THE POTENTIAL OF WASTE COOKING OIL AS BIO-ASPHALT FOR ALTERNATIVE BINDER – AN OVERVIEW
  218. A REVIEW ON APPLICATION OF WASTE COOKING OIL AS REJUVENATOR IN POROUS ASPHALT MIXTURE
  219. A REVIEW OF CHEMICAL AND PHYSICAL PROPERTIES OF COCONUT SHELL IN ASPHALT MIXTURE
  220. Fresh Properties and Flexural Strength of Self-Compacting Concrete Integrating Coal Bottom Ash
  221. Palm oil fuel ash as potential green micro-filler in polymer concrete
  222. Properties of Hooked Steel Fibers Reinforced Alkali Activated Material Concrete
  223. APPLICATION OF NANOTECHNOLOGY IN ASPHALT BINDER: A CONSPECTUS AND OVERVIEW
  224. STRENGTH OF POROUS CONCRETE PAVEMENT AT DIFFERENT CURING METHODS
  225. A REVIEW OF UTILIZATION OF COCONUT SHELL AND COCONUT FIBER IN ROAD CONSTRUCTION
  226. LABORATORY EVALUATION ON THE EFFECT OF CLOGGING ON PERMEABILITY OF POROUS ASPHALT MIXTURES
  227. Fresh Properties of Self-Compacting Concrete Integrating Coal Bottom Ash as a Replacement of Fine Aggregates
  228. Effect of Rubber Tyre Granules on Concrete Strength and the Microstructure Characteristics of Rubberized Concrete
  229. nano silica in mortar and porous concrete pavement
  230. Cementitious Materials Usage in Self-Compacting Concrete: A Review
  231. Porous Block
  232. A Review of Advance Nanotechnology against Pavement Deterioration
  233. Split Tensile Strength on Self-compacting Concrete Containing Coal Bottom Ash
  234. Microstructural characterisation of dry mixed rubberised asphalt mixtures
  235. Curing of Asphalt Emulsified Tack Coat Subjected to Malaysian Weather Conditions
  236. An Overall Review: Modified Asphalt Binder Containing Sasobit in Warm-Mix Asphalt Technology
  237. Steel Slag as A Road Construction Material
  238. Performance of Modified Asphalt Binder with Tire Rubber Powder
  239. Strength and Microstructure Properties of Double Layered Concrete Paving Blocks Containing Waste Tyre Rubber Granules
  240. Aggregate Angularity Effect on Porous Asphalt Engineering Properties and Performance
  241. A Review on The Exploration of Nanomaterials Application in Pavement Engineering
  242. DETERMINATION OF GROOVE AND MECHANICAL PROPERTIES OF UNDERSIDE SHAPED CONCRETE PAVER
  243. Effect of Palm Oil Fuel Ash (POFA) on the Durability of Asphaltic Concrete
  244. Low Noise and Properties of Double Layer Concrete Paving Blocks
  245. Potential Effect of Palm Oil Fuel Ash as Micro-Filler of Polymer Concrete
  246. Effect of Using Waste Tyre Rubber on the Properties of Double Layer Rubberized Concrete Paving Blocks
  247. Properties of Asphaltic Concrete Containing Sasobit®
  248. Evaluation of Binder Absorption in Asphalt Mixture with Various Aging Conditions Using Rice Method
  249. Influences of Crumb Rubber Sizes on Hot Mix Asphalt Mixture
  250. Effect of Aggregate Shape on the Properties of Asphaltic Concrete AC14
  251. Performance of Steel Slag in Highway Surface Course
  252. Use of Imaging Techniques for Viewing the Internal Structure of Rubberised Asphalt Mixtures
  253. Laboratory Investigation on the Effects of Flaky Aggregates on Dynamic Creep and Resilient Modulus of Asphalt Mixtures
  254. A Review of Crumb Rubber Modification in Dry Mixed Rubberised Asphalt Mixtures
  255. The Indirect Tensile Strength of Palm Oil Fuel Ash (POFA) Modified Asphaltic Concrete
  256. Porous Concrete Paving Blocks Using Coarse Aggregate
  257. Double Layer Concrete Paving Blocks Using Waste Tyre Rubber as Aggregate Replacement
  258. Effect of Rice Husk Ash Fineness on the Properties of Concrete
  259. Strength and microstructure analysis of concrete containing rice husk ash under seawater attack by wetting and drying cycles
  260. Performance of RHA Blended Cement Concrete under Sodium Chloride via Wetting and Drying
  261. A Review of Porous Concrete Pavement: Applications and Engineering Properties
  262. Compressive and Flexural Strength of Foamed Concrete Containing Polyolefin Fibers
  263. Chemical Properties of Waste Tyre Rubber Granules
  264. Mechanical Properties of Double Layer Rubberized Concrete Paving Blocks
  265. Effect of Coarse Aggregate Sizes on Properties of Porous Concrete Paving Blocks
  266. Air Void Characterisation in Porous Asphalt Using X-Ray Computed Tomography
  267. Porous Concrete Pavement Containing Nano-Silica: Pre-Review
  268. Strength of Concrete Containing Rice Husk Ash Subjected to Sodium Sulfate Solution via Wetting and Drying Cyclic
  269. Performance of blended ash geopolymer concrete at elevated temperatures
  270. Aggregate Degradation Characteristics of Stone Mastic Asphalt Mixtures
  271. Properties of Mortar Containing Rice Husk Ash at Different Temperature and Exposed to Aggressive Environment
  272. Properties of Porous Asphalt Mixture Made with Styrene Butadiene Styrene under Long Term Oven Ageing
  273. Thermal Analysis and Pozzolanic Index of Rice Husk Ash at Different Grinding Time
  274. Properties of Concrete Containing Rice Husk Ash Under Sodium Chloride Subjected to Wetting and Drying
  275. Effect of rice husk ash fineness on the chemical and physical properties of concrete
  276. Strength and permeability properties of concrete containing rice husk ash with different grinding time
  277. ENGINEERING PROPERTIES OF NORMAL CONCRETE GRADE 40 CONTAINING RICE HUSK ASH AT DIFFERENT GRINDING TIME
  278. Elasticity of Calcium Silicate Brick Masonry Wall Due to Sulphate Attack
  279. Influence of Sulphate on the Moisture Movement of Calcium Silicate Brick Masonry Wall
  280. Effects of Temperature and Binder Type on the Dynamic Creep of Asphaltic Concrete