All Stories

  1. A quantitative evaluation method for tunnel excavation disturbance based on a combined finite-discrete element method
  2. State-of-the-Art Review and Prospect of Modelling the Dynamic Fracture of Rocks Under Impact Loads and Application in Blasting
  3. A coupled humidity diffusion and swelling stress damage model with large deformation analysis and application in studying the swelling behaviors of skarn surrounding a tunnel
  4. Analysis of step-path failure mechanisms in rock slopes with en-echelon joints based on FDEM simulation
  5. Experimental Investigation of Mechanical Behavior and Damage Evolution of Coal Materials Subjected to Cyclic Triaxial Loads with Increasing Amplitudes
  6. Development of a GPGPU-parallelized 3-D FDEM with a novel and simple implementation of extrinsic cohesive zone model
  7. Modelling dynamic fracture and fragmentation of rocks under multiaxial coupled static and dynamic loads with a parallelised 3D FDEM
  8. Development of a GPGPU-parallelized FDEM based on extrinsic cohesive zone model with master-slave algorithm
  9. Development of a finite-discrete element method with finite-strain elasto-plasticity and cohesive zone models for simulating the dynamic fracture of rocks
  10. Rock dynamic fracture by destress blasting and application in controlling rockbursts in deep underground
  11. Three-dimensional modelling on the impact fracture of glass using a GPGPU-parallelised FDEM
  12. Development of a three-dimensional grain-based combined finite-discrete element method to model the failure process of fine-grained sandstones
  13. Editorial: Geological disasters and its prevention in deep mining
  14. Experimental, theoretical and numerical modelling of the deterioration and failure process of sandstones subject to freeze–thaw cycles
  15. Tunnel Lining Segment Deformation and Cracking Mechanisms during Tunneling in Complex Mixed Grounds with the Combined Mining and Shield Tunneling Method
  16. Investigation of the Dynamic Pure-Mode-II Fracture Initiation and Propagation of Rock during Four-Point Bending Test Using Hybrid Finite–Discrete Element Method
  17. The State of the Art and New Insight into Combined Finite–Discrete Element Modelling of the Entire Rock Slope Failure Process
  18. Hybrid Finite-Discrete Element Modelling of Various Rock Fracture Modes during Three Conventional Bending Tests
  19. Study on fracture behavior of molars based on three‐dimensional high‐precision computerized tomography scanning and numerical simulation
  20. Development of excavation damaged zones around a rectangular roadway under mining-induced pressure
  21. Experimental and numerical studies on failure behaviours of sandstones subject to freeze-thaw cycles
  22. 3D nonlinear finite element modelling of mechanical behavior of a new wall-beam-strut joint for prefabricated underground construction and validation again experimental testing
  23. Combined finite-discrete element modellings of rockbursts in tunnelling under high in-situ stresses
  24. Experimental study on the effect of granular backfill with various gradations on the mechanical behavior of rock
  25. FDEM Modelling of Rock Fracture Process during Three-Point Bending Test under Quasistatic and Dynamic Loading Conditions
  26. Hybrid finite–discrete element modelling of rock fracture process in intact and notched Brazilian disc tests
  27. Hybrid finite‑discrete element simulator based on GPGPU‑parallelized computation for modelling crack initiation and coalescence in sandy mudstone with prefabricated cross-flaws under uniaxial compression
  28. Modelling of dynamic rock fracture process using the finite-discrete element method with a novel and efficient contact activation scheme
  29. Combined Finite-Discrete Element Modelling of Dynamic Rock Fracture and Fragmentation during Mining Production Process by Blast
  30. Experimental Investigation of the Mechanical Behaviour of Wall–Beam–Strut Joints for Prefabricated Underground Construction
  31. Characteristics of stratum movement induced by downward longwall mining activities in middle-distance multi-seam
  32. Three-Dimensional Combined Finite-Discrete Element Modeling of Shear Fracture Process in Direct Shearing of Rough Concrete–Rock Joints
  33. FDEM simulation of rock damage evolution induced by contour blasting in the bench of tunnel at deep depth
  34. Experimental and Numerical Studies on the Mechanical Performance of a Wall-beam-strut Joint with Mechanical Couplers for Prefabricated Underground Construction
  35. Hybrid Finite-Discrete Element Modelling of Excavation Damaged Zone Formation Process Induced by Blasts in a Deep Tunnel
  36. Deformation Characterisation and Distress Diagnosis of a Metro Shield Tunnel by Adjacent Constructions
  37. Development of thermal and deformation stability of Qinghai-Tibet Highway under sunny-shady slope effect in southern Tanglha region in recent decade
  38. GPGPU-parallelised hybrid finite-discrete element modelling of rock chipping and fragmentation process in mechanical cutting
  39. Combined finite-discrete element modelling of rock fracture and fragmentation induced by contour blasting during tunnelling with high horizontal in-situ stress
  40. Two-stage cultivation strategy for simultaneous increases in growth rate and lipid content of microalgae: A review
  41. Effect of Web Openings on Flexural Behaviour of Underground Metro Station RC Beams under Static and Cyclic Loading
  42. Failure mechanism and strengthening effect of shield tunnel lining reinforced by steel plates with corbels
  43. Hybrid finite-discrete element modelling of rock fracture during conventional compressive and tensile strength tests under quasi-static and dynamic loading conditions
  44. A wavelet transform method for studying the energy distribution characteristics of microseismicities associated rock failure
  45. GPGPU-parallelized 3D combined finite–discrete element modelling of rock fracture with adaptive contact activation approach
  46. A case study on key techniques for long-distance sea-crossing shield tunneling
  47. Development of a 3D Hybrid Finite-Discrete Element Simulator Based on GPGPU-Parallelized Computation for Modelling Rock Fracturing Under Quasi-Static and Dynamic Loading Conditions
  48. Three-dimensional finite element modelling of excavation-induced tunnel wall movement and damage: a case study
  49. Application of peridynamics to dynamic fracture process analysis of rock-like materials
  50. Numerical simulation of the rock cutting
  51. Development of a GPGPU‐parallelized hybrid finite‐discrete element method for modeling rock fracture
  52. Critical Conditions for Coal Wellbore Failure During Primary Coalbed Methane Recovery: A Case Study from the San Juan Basin
  53. Experimental and Theoretical Studies on Effect of Height-to-Diameter Ratios on Failure Forms and Mechanical Characteristics of Foamed Concrete
  54. A unified model for frost heave pressure in the rock with a penny-shaped fracture during freezing
  55. 3D numerical study on fracture process of concrete with different ITZ properties using X-ray computerized tomography
  56. Stress-Strain Characteristics of Foamed Concrete Subjected to Large Deformation under Uniaxial and Triaxial Compressive Loading
  57. An overview on advances in computational fracture mechanics of rock
  58. HYBRID CONTINUUM-DISCONTINUUM MODELLING OF ROCK FRACUTRE PROCESS IN BRAZILIAN TENSILE STRENGTH TEST
  59. Scale effect in macroscopic permeability of jointed rock mass using a coupled stress–damage–flow method
  60. A combined supporting system based on foamed concrete and U-shaped steel for underground coal mine roadways undergoing large deformations
  61. HYBRID FINITE-DISCRETE ELEMENT MODELLING OF BLAST-INDUCED EXCAVATION DAMAGED ZONE IN THE TOP-HEADING OF DEEP TUNNELS
  62. A zoning model for coal mining - induced strata movement based on microseismic monitoring
  63. Microseismic Monitoring and 3D Finite Element Analysis of the Right Bank Slope, Dagangshan Hydropower Station, during Reservoir Impounding
  64. Implementation of a Time-Domain Random-Walk Method into a Discrete Element Method to Simulate Nuclide Transport in Fractured Rock Masses
  65. Hybrid finite-discrete element modelling of dynamic fracture and resultant fragment casting and muck-piling by rock blast
  66. Brittle fracture of rock under combined tensile and compressive loading conditions
  67. A Case Study on the Strata Movement Mechanism and Surface Deformation Regulation in Chengchao Underground Iron Mine
  68. Hybrid finite-discrete element modelling of asperity degradation and gouge grinding during direct shearing of rough rock joints
  69. Hydraulic fracturing propagation mechanism during shale gas reservoir stimulation through horizontal well
  70. Numerical model for the cracking behavior of heterogeneous brittle solids subjected to thermal shock
  71. Performance of Modified Asphalt Binder with Tire Rubber Powder
  72. Effect of the impounding process on the overall stability of a high arch dam: a case study of the Xiluodu dam, China
  73. Study on Optimal Grouting Timing for Controlling Uplift Deformation of a Super High Arch Dam
  74. Experimental study on failure behaviour of deep tunnels under high in-situ stresses
  75. A Mesostructure-based Damage Model for Thermal Cracking Analysis and Application in Granite at Elevated Temperatures
  76. Experimental Study on Cracking, Reinforcement, and Overall Stability of the Xiaowan Super-High Arch Dam
  77. Effects of Outlets on Cracking Risk and Integral Stability of Super-High Arch Dams
  78. Hybrid finite–discrete element modeling of geomaterials fracture and fragment muck-piling
  79. Rheological Characteristics of Weak Rock Mass and Effects on the Long-Term Stability of Slopes
  80. Reinforcement design and stability analysis for large-span tailrace bifurcated tunnels with irregular geometry
  81. Rock failure progressive process and resultant fragment muck-piling using a hybrid finite-discrete element method
  82. Hybrid Finite-Discrete Element Modelling of Dynamic Fracture of Rocks with Various Geometries
  83. Stress–damage–flow coupling model and its application to pressure relief coal bed methane in deep coal seam
  84. Characterisation of rock aggregate breakage properties using realistic texture-based modelling
  85. Numerical simulation of the rock fragmentation process induced by two drill bits subjected to static and dynamic (impact) loading
  86. Effects of tunnelling on existing support systems of perpendicularly crossing tunnels
  87. Full 3D modelling for effects of tunnelling on existing support systems in the Sydney region
  88. Numerical Studies on Bit-Rock Fragmentation Mechanisms
  89. Numerical modeling of the fracture process in a three-unit all-ceramic fixed partial denture
  90. 3D modelling for effects of tunnelling on existing support systems
  91. Chapter 16 Numerical Investigation of Particle Breakage as Applied to Mechanical Crushing
  92. Numerical Modelling of the Heterogeneous Rock Fracture Process Using Various Test Techniques
  93. Fracture spacing in layered materials and pattern transition from parallel to polygonal fractures
  94. Numerical studies on the inter-particle breakage of a confined particle assembly in rock crushing
  95. Microstructural Modeling Approach Applied to Rock Material
  96. Numerical approach to particle breakage under different loading conditions
  97. Numerical studies on the failure process and associated microseismicity in rock under triaxial compression
  98. Numerical simulation of shear fracture (mode II) in heterogeneous brittle rock
  99. Rock fragmentation mechanisms induced by a drill bit
  100. Numerical simulation of shear fracture (Mode II) in heterogeneous brittle rock
  101. Rock fragmentation mechanisms induced by a drill bit
  102. Characterization of rock heterogeneity and numerical verification
  103. Numerical simulation of the rock fragmentation process induced by indenters
  104. Numerical simulation of the fracture process in cutting heterogeneous brittle material
  105. Numerical investigation of particle breakage as applied to mechanical crushing—Part II: Interparticle breakage
  106. Numerical investigation of particle breakage as applied to mechanical crushing—Part I: Single-particle breakage
  107. On Failure Modes and Strength Characterization of Brittle Disordered Materials under Uniaxial Compression and Tension
  108. Influence of Heterogeneity on Crack Propaga-Tion Mode in Brittle Rock