All Stories

  1. Bond Stress Analysis Between High-Performance Steel Fiber Reinforced Mortar and Deformed Steel Bars Under Pull-Out Test
  2. Performance of limestone masonry walls under diagonal compression using innovative hybrid fiber-reinforced polymer (FRP) reinforcement techniques
  3. Effect of Crack Orientation in Crack Detection of a Pipeline Based on Eddy Current Testing and Inverse Problems Using Grey Wolf Optimizer
  4. Optimization of Metakaolin-Based Binders as Cement Alternatives for Chloride and Total Petroleum Hydrocarbon Removal: A Response Surface Methodology Approach
  5. Hydrometallurgical extraction of zinc from wastes: optimization, feasibility and practical sustainable approach
  6. Surface treatment of Alfa fibers to improve mechanical performance and matrix compatibility in sustainable bio-composites
  7. Progressive Collapse Resistance of Steel Frames with Reduced Beam Sections and Web Openings
  8. An intelligent GUI for machine learning-based prediction of SFRC compressive strength under high strain rates
  9. How engineering and technology sectors are derailed by legislations: a case study of Pakistan
  10. Shear performance of C-shaped perforated angle connectors in steel-concrete composite beams
  11. Axial Behavior and Stability of Built-Up Cold-Formed Steel Columns with and without Concrete Infill: Experimental and Numerical Investigation
  12. An experimental approach for the determination of the physical and mechanical properties of a sustainable geopolymer mortar made with Algerian ground-granulated blast furnace slag
  13. Tensile Performance of Perforated IPE Connectors within Composite Beams
  14. Structural Performance of Reinforced Concrete Beams with Steel Fibres as Secondary Reinforcement: Experimental and Pre-peak Numerical Modelling
  15. Financial risk management in the construction projects
  16. Numerical Analysis of the Bond Behaviour of High-Strength Concrete-Filled Steel Square Columns with Different Shear Connectors
  17. Mitigating high-temperature vulnerabilities in concrete: utilizing waste plastic fibers for enhanced mechanical resilience and environmental sustainability
  18. Stiffness of Loaded Face of Steel Rectangular Hollow Section Columns with and without Concrete Infill in Beam-column Endplate Connections
  19. Enhancing Sustainability in Construction: Investigating the Thermal Advantages of Fly Ash-Coated Expanded Polystyrene Lightweight Concrete
  20. Influence of Calcining Temperature on the Mineralogical and Mechanical Performance of Calcined Impure Kaolinitic Clays in Portland Cement Mortars
  21. Investigation of screw assembly on cold-formed steel members: experimental and numerical studies
  22. Coupling Behavior of Autogenous and Autonomous Self-Healing Techniques for Durable Concrete
  23. Optimizing Thin‐Walled Structures: Analysis of Cold‐Formed Steel Columns With Concrete Infills, Web Stiffeners, and CFRP Strengthening
  24. EVALUATING THE QUALITY OF LIGHTWEIGHT CONCRETE MADE FROM COATED EPS AGGREGATES USING ULTRASONIC PULSE VELOCITY
  25. Performance of a Single Source of Low-Grade Clay in a Limestone Calcined Clay Cement Mortar
  26. The effective length factor of columns in steel framed buildings with end restraint effects
  27. Optimizing Polymer-Stabilized Raw Earth Composites with Plant Fibers Reinforcement for Historic Building Rehabilitation
  28. Prediction of impact response of square reinforced concrete (RC) slab with square/circular opening under drop-weight impact using FEM simulation
  29. Use of the Algerian natural pozzolan for the production of a geopolymer as a complete cement replacement
  30. Seismic Performance of L-Shaped RC Shear Walls of Buildings Subjected to Monotonic Lateral Loading
  31. Linear and Nonlinear Stability Analysis of Thin Rectangular Plates Subjected to Local In-Plane Shearing
  32. High-Temperature Behavior of Polyethylene-Terephthalate-Fiber-Reinforced Sand Concrete: Experimental Investigation
  33. Expanded polystyrene (EPS) in concrete: A bibliometric analysis
  34. The effect of fly ash as coating powder on compressive strength of lightweight concrete
  35. Mortar with fly ash as a partial cement replacement: Analysing the compressive strength and heat of hydration
  36. Numerical investigation of the seismic vulnerability of bridge piers strengthened with steel fibre reinforced concrete (SFRC) and carbon fibre composites (CFC)
  37. Experimental and numerical investigation of gap K-joints of rectangular hollow section trusses
  38. Potential of Calcined Brick Clay as a Partial Substitution in Blended Cement Mortars
  39. Mechanochemical Characterisation of Calcined Impure Kaolinitic Clay as a Composite Binder in Cementitious Mortars
  40. Flexural performance of reinforced concrete beams with recycled aggregates and steel fibres
  41. Periods and Mode Shapes for Uniform Shear Wall Buildings: Importance of Selecting the Appropriate Dynamic Behavior
  42. The Heat Transfer Rate of Composite Wall with Series and Parallel Configuration
  43. Artificial Aggregate Made from Expanded Polystyrene Beads Coated with Cement Kiln Dust—An Experimental Trial
  44. Investigate the Effect of Ground Granulated Blast Slag on Self Compacting Concrete
  45. Characteristics of a novel lightweight concrete
  46. Mechanical Modeling and General Analytical Solution for the Dynamic Buckling of Plane Structures Using a Beam-Column Element with Varying End Restraints
  47. Behaviour of a Foam Mixture as a Lightweight Construction Material
  48. Exploring safety climate factors in construction
  49. Exploring safety climate factors in construction
  50. Fly Ash and Silica in Expanded Polystyrene Concrete Finding the Research Gap (Preliminary Study)
  51. Developing a Sustainable Concrete Using Ceramic Waste Powder
  52. Extended application of the Equivalent Mortar Volume mix design method for recycled aggregate concrete
  53. Effect of mix design methods on the mechanical properties of steel fibre-reinforced concrete prepared with recycled aggregates from precast waste
  54. UAE’s Commitment Towards UN Sustainable Development Goals
  55. Shear characterisation of pultruded superstructural FRP-concrete push-outs
  56. Evaluation of conventional and equivalent mortar volume mix design methods for recycled aggregate concrete
  57. Response of reciprocally supported advanced FRP composite jointed frames - Part 1: Experimental study
  58. The potency of recycled aggregate in new concrete: a review
  59. Challenges towards renewable energy: an exploratory study from the Arabian Gulf region
  60. Numerical model for the non-linear dynamic analysis of multi-storey structures with semi-rigid joints with specific reference to the Algerian code
  61. A Modified Method for Los Angeles Abrasion Test
  62. Briefing: Status of Occupational Safety and Health in GCC Construction
  63. Optimization of a finite element mesh for plates subjected to in-plane patch loading
  64. High fatalities risk found in gulf construction
  65. Performance of lightweight granulated glass concrete beams reinforced with basalt FRP bars
  66. Investigation of the effect of consolidation on cement flow behaviour
  67. An Assessment of Construction Workers Health Profile and Body Pain
  68. A new approach to improve mechanical properties and durability of low-density oil well cement composite reinforced by cellulose fibres in microstructural scale
  69. Influence of joint rigidity on the elastic buckling load of sway and non-sway steel frames
  70. Investigation of intrinsic de-bonding in bonded concrete overlays: Material characterisation and numerical Study
  71. Finite element analysis of the flexural behaviour of steel-reinforced GEM-TECH cementitious material
  72. Utilisation of waste cardboard and Nano silica fume in the production of fibre cement board reinforced by glass fibres
  73. Mechanical model for determining the critical load of plane frames with semi-rigid joints subjected to static loads
  74. Linear and nonlinear buckling analysis of a locally stretched plate
  75. Behaviour of concrete reinforced with types of fibres and without the use of any admixtures.
  76. Factors affecting productivity of labour in the construction industry in Egypt.
  77. The impact of consolidation and interparticle forces on cohesive cement powder
  78. Behaviour of welded tee-connection to a rectangular hollow section subjected to tension.
  79. Erratum to “Elastic buckling of columns with end restraint effects” [J Constr Steel Res 2013;87:1–5]
  80. Response to discussion on “Elastic buckling of columns with end restraint effects”
  81. Elastic buckling of columns with end restraint effects
  82. Analysis of the stability of plates subjected to a compression load using the finite element method.
  83. Justifying the need for a data security management plan for the UAE
  84. Mechanical model for the analysis of steel frames with semi rigid joints
  85. Behaviour of welded T-end connection to rectangular hollow section (RHS) in axial tension
  86. A novel modular constructional element
  87. Behaviour of T-end Plate Connection to RHSPart I: Experimental Investigation
  88. Investigation into a New Type of Multi-Reciprocal Grid
  89. The effect of joint eccentricity on the distribution of forces in RHS lattice girders
  90. Detailed design models and connections
  91. The adjustment of stiffness matrices
  92. Serviceability Codes for Steel Framed Structures: A Review
  93. Predicting the elastic buckling of an element in a beam-column arrangement.