All Stories

  1. Improvement of photo-electrocatalytic CO2 reduction on boron-doped-g-C3N4 supported with Fe-MOF (NH2-MIL-101)
  2. Effect of drug loading on sustained release through needleless electrospun nanocellulose/chitosan/polylactic acid based drug delivery system
  3. A recyclable silica gel-supported schiff-base palladium nanocatalyst for suzuki-miyaura coupling and green organic synthesis
  4. An Insight Into the Drug Release Kinetics of Polylactic Acid/Chitosan/Nanocellulose Nanofibers: Effect of Preparation Method on Drug Release Kinetics
  5. Effect of recycled tire tubber particle size and filler loading on the properties of high-density polyethylene composites
  6. Science mapping of TiO2 modification strategies for wastewater treatment: Current and future trends
  7. Density-based solvent separation method for recycling mixed low-value plastic waste
  8. MOF-based catalysts for CO2 reduction via photo-, electro-, and photoelectrocatalysis: a review
  9. A Review on Advancements in Solid‐State Hydrogen Storage: The Role of Porous Hollow Carbon Nanospheres
  10. Study on mechanical and barrier properties of iron cellulose/PLA composite film
  11. An overview of the use of photocatalysis in the environmental control of textile effluent
  12. The effect of waste tire granules on the properties of polyethylene terephthalate thermoplastic
  13. Preparation of jute waste-based activated carbon supported copper oxide nanoparticles for hydrogen storage in MgH2
  14. Silica supported Schiff-based palladium nanocatalyst for n-alkylation at room temperature
  15. Developing nanocellulose-loaded chitosan–polylactic acid biofilms for green food packaging
  16. Physicochemical interaction of microstructured drumsticks with synthetic Dye: The tailoring of surface phenomenon
  17. Cu3TiO4 nanoparticles catalyzed synthesis of N-alkylated SpiroQuinazolines: Blue LED activation and bioactivity evaluation
  18. Potential Applications of Metal‐Doped Nanomaterials for Enhancing Solid‐State Hydrogen Storage
  19. “Enhancing Fruit Preservation: Fungal Growth Inhibition with Grape Seed‐Mediated Ag@AgCl Nanoparticles through Desirability‐Based Optimization”
  20. Effect of bio-based nanosilica on the mechanical properties of single empty fruit bunch fibre
  21. Effects of ground rubber powder in a polyethylene-based composite
  22. Recent methods of lignin demethylation: A mini review
  23. Investigation on mechanical properties and water absorption behaviour of plastic sand brick using waste polyethylene terephthalate
  24. Investigation on mechanical properties on polypropylene/waste latex glove
  25. Ferromagnetic Enhancement of Microcrystalline Cellulose via Chemical Reduction Method
  26. ZIF-67 hybridization and boron doping to enhance the photo-electrocatalytic properties of g-C3N4
  27. Current issues and potential solutions for the electrospinning of major polysaccharides and proteins: A review
  28. Physicochemical Interaction of Microstructured Drumsticks withSynthetic Dye: The Tailoring of Surface Phenomenon in Technology
  29. A review on current trends and future prospectives of electrospun biopolymeric nanofibers for biomedical applications
  30. Outline of microbial fuel cells technology and their significant developments, challenges, and prospects of oxygen reduction electrocatalysts
  31. Interspecies microbial interactions in bioelectrochemical system and biodegradation: A state of the art review
  32. Isolation and characterization of soda lignin from OPEFB and evaluation of its performance as wood adhesive
  33. Highly Effective B@g‐C3N4/Polyaniline Nanoblend for Photoelectrocatalytic Reduction of CO2 to Methanol
  34. Performance of Hypersaline Brine Desalination Using Spiral Wound Membrane: A Parametric Study
  35. An overview on recent biomedical applications of biopolymers: Their role in drug delivery systems and comparison of major systems
  36. Enhancing the photo-electrocatalytic properties of g-C3N4 by boron doping and ZIF-8 hybridization
  37. Biodiesel from Nahor Seed Oil: Synthesis, Evaluation, and Compatibility with Petrodiesel
  38. Hydrogen production via photoreforming of wastewater under LED light–driven over CuO@exfoliated g–C3N4 nanoheterojunction
  39. Catalytic Role of Binary Oxides (CuO & Al 2 O 3 ) on Hydrogen Storage in MgH 2
  40. Efficient treatment of organic pollutants by boron doped TiO2 photocatalysts under visible light radiation
  41. State-of-the-art biosynthesis of tin oxide nanoparticles by chemical precipitation method towards photocatalytic application
  42. Biosynthesis of rod shaped Gd2O3 on g-C3N4 as nanocomposite for visible light mediated photocatalytic degradation of pollutants and RSM optimization
  43. Effect of ultrasonication on alkaline treatment of empty fruit bunch fibre: Fourier Transform Infrared Spectroscopy (FTIR) and morphology study
  44. Effects of natural-based SiO2 nanocoolant on car radiator: Thermal profile
  45. Influence of rice husk based nanosilica in rheological and stability of binary mixture fluid
  46. Photoelectrochemical performance of P@MoS2 for hydrogen evolution reaction
  47. Photoreforming hydrogen production by carbon doped exfoliated g-C3N4: Optimization using design expert®software
  48. Green Synthesis of Stannic Oxide Nanoparticles for Ciprofloxacin Degradation: Optimization and Modelling Using a Response Surface Methodology (RSM) Based on the Box–Behnken Design
  49. Technical difficulties of mixed culture driven waste biomass-based biohydrogen production: Sustainability of current pretreatment techniques and future prospective
  50. Optimization of process parameters for photoreforming of hydrogen evolution via response surface methodology (RSM): A study using Carbon@exfoliated g–C3N4
  51. Microbial lipid accumulation through bioremediation of palm oil mill effluent using a yeast-bacteria co-culture
  52. Sustainable hydrogen production by CdO/exfoliated g-C3N4 via photoreforming of formaldehyde containing wastewater
  53. A Combined Experimental and Theoretical Investigation of Perylene Based Dyes as Sensitizer for Dye-Sensitized Solar Cell
  54. Augmentation of microbial fuel cell and photocatalytic polishing technique for the treatment of hazardous dimethyl phthalate containing wastewater
  55. Adsorption of manganese ions from aqueous solution by using manganese oxide coated zeolite
  56. Significant improvement of power generation through effective substrate-inoculum interaction mechanism in microbial fuel cell
  57. Yeast and bacteria co-culture-based lipid production through bioremediation of palm oil mill effluent: a statistical optimization
  58. Physicochemical and electrochemical characterization of CdO/g-C3N4 nanocomposite for the photoreforming of petrochemical wastewater
  59. Microbial synergistic interactions enhanced power generation in co-culture driven microbial fuel cell
  60. Fabricating a g-C3N4/CuO heterostructure with improved catalytic activity on the multicomponent synthesis of pyrimidoindazoles
  61. Facile synthesis of CuO/CdS heterostructure photocatalyst for the effective degradation of dye under visible light
  62. Tailoring the properties of g-C3N4 with CuO for enhanced photoelectrocatalytic CO2 reduction to methanol
  63. Rice Husk Nanosilica Preparation and Its Potential Application as Nanofluids
  64. Construction of hybrid g-C3N4/CdO nanocomposite with improved photodegradation activity of RhB dye under visible light irradiation
  65. Glycerol electro-oxidation to dihydroxyacetone on phosphorous-doped Pd/CNT nanoparticles in alkaline medium
  66. Phyto-synthesis of CuO nano-particles and its catalytic application in C-S bond formation
  67. Preparation and Characterization of Grease using Used Cooking Oil and Used Engine Oil
  68. Rejection Rate Reduction of the Automotive Thermoplastic Parts in Injection Moulding Using Response Surface Methodology
  69. Decolorization of Reactive Dyes from Aqueous Solution Using Combined Coagulation-Flocculation and Photochemical Oxidation (UV/H₂O₂)
  70. Thermo‐catalytic conversion of greenhouse gases (CO 2 and CH 4 ) to CO‐rich hydrogen by CeO 2 modified calcium iron oxide supported nickel catalyst
  71. Mono- and bi-cyanoacrylic acid substituted phenothiazine based sensitizers for dye sensitized solar cells
  72. Photocatalytic reduction of CO 2 to methanol over ZnFe 2 O 4 / Ti...
  73. Photoelectrochemical activity of CuO-CdS heterostructured catalyst for CO2 reduction
  74. Potentiality of petrochemical wastewater as substrate in microbial fuel cell
  75. Selective synthesis of methanol by photoelectrocatalytic reduction of CO2 over PANI-CuFe2O4 hybrid catalyst
  76. Photoelectrocatalytic reduction of CO2 to methanol over CuFe2O4@PANI photocathode
  77. Pd/CNT Catalysts for Glycerol Electro‐oxidation: Effect of Pd Loading on Production of Valuable Chemical Products
  78. Microalgal Cell Disruption and Lipid Extraction Techniques for Potential Biofuel Production
  79. A kinetic model for the photocatalytic reduction of CO2 to methanol pathways
  80. Electro-oxidation of renewable glycerol to value added chemicals over phosphorous-doped Pt/MCNTs nanoparticles
  81. Bio-electrochemical power generation in petrochemical wastewater fed microbial fuel cell
  82. Electro-oxidation of waste glycerol to tartronic acid over Pt/CNT nanocatalyst: study of effect of reaction time on product distribution
  83. Catalytic performance and antimicrobial activity of Mg(OH)2/MgO colloidal nanoparticles in alkyd resin nanocomposite derived from palm oil
  84. Hetero-structure CdS–CuFe2O4 as an efficient visible light active photocatalyst for photoelectrochemical reduction of CO2 to methanol
  85. Multi-perspective CuO@C nanocomposites: Synthesis using drumstick peel as carbon source and its optimization using response surface methodology
  86. Effect of light irradiation on esterification of oleic acid with ethanol catalyzed by immobilized Pseudomonas cepacia lipase
  87. Microbial Lipid Accumulation through Bioremediation of Palm Oil Mill Wastewater byBacillus cereus
  88. Biofilm re-vitalization using hydrodynamic shear stress for stable power generation in microbial fuel cell
  89. Biogenic approach to synthesize rod shaped Gd 2 O 3 nanoparticles and its optimization using response surface methodology‐Box–Behnken design model
  90. Cellulose Supported Pd(II) Complex Catalyzed Carbon–Carbon Bonds Formation
  91. IBA-modified gypsum-containing epoxy resin coating for rebar: corrosion performance and bonding characteristics
  92. Synthesis of Titania Doped Copper Ferrite Photocatalyst and Its Photoactivity towards Methylene Blue Degradation under Visible Light Irradiation
  93. Harnessing renewable hydrogen-rich syngas from valorization of palm oil mill effluent (POME) using steam reforming technique
  94. Optimization of renewable hydrogen-rich syngas production from catalytic reforming of greenhouse gases (CH4 and CO2) over calcium iron oxide supported nickel catalyst
  95. 2018 International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB) Preface
  96. Facile synthesis of CaFe2O4 for visible light driven treatment of polluting palm oil mill effluent: Photokinetic and scavenging study
  97. CO2 adsorption using 3-triethoxysilylpropylamine (APTES)-modified commercial rice husk activated carbon
  98. Coconut tree bark as a potential low-cost adsorbent for the removal of methylene blue from wastewater
  99. Enhanced Biohydrogen Production from Citrus Wastewater Using Anaerobic Sludge Pretreated by an Electroporation Technique
  100. Photoelectrocatalytic Reduction of Carbon Dioxide to Methanol Using CuFe2O4 Modified with Graphene Oxide under Visible Light Irradiation
  101. Optimization of co-culture inoculated microbial fuel cell performance using response surface methodology
  102. Palm kernel meal as a melamine urea formaldehyde adhesive filler for plywood applications
  103. Photoelectrochemical reduction of carbon dioxide to methanol on p-type CuFe2O4 under visible light irradiation
  104. Facile Synthesis of PVP-MnO2/CNT Composites as ORR Electrocatalyst for an Air-Cathode Microbial Fuel Cell
  105. Experimental evaluation and empirical modelling of palm oil mill effluent steam reforming
  106. Electrochemical Study of Copper Ferrite as a Catalyst for CO2 Photoelectrochemical Reduction
  107. Hydrogen-rich syngas production via steam reforming of palm oil mill effluent (POME) – A thermodynamics analysis
  108. An assessment of the longevity of samarium cobalt trioxide perovskite catalyst during the conversion of greenhouse gases into syngas
  109. Syngas Production from Catalytic CO2 Reforming of CH4 over CaFe2O4 Supported Ni and Co Catalysts: Full Factorial Design Screening
  110. Influence of CuO nanoparticle on palm oil based alkyd resin preparation and its antimicrobial activity
  111. INFLUENCE OF ALKALI TREATMENT ON PHYSICO-CHEMICAL PROPERTIES OF MALAYSIAN BAMBOO FIBER: A PRELIMINARY STUDY
  112. An Insight of Synergy between Pseudomonas aeruginosa and Klebsiella variicola in a Microbial Fuel Cell
  113. Enhanced Current Generation Using Mutualistic Interaction of Yeast-Bacterial Coculture in Dual Chamber Microbial Fuel Cell
  114. Formation of CuO Nanoparticle in Glycerol and Its Catalytic Activity for Alkyd Resin Synthesis
  115. Bioremediation of palm oil mill effluent and lipid production by Lipomyces starkeyi: A combined approach
  116. Fungal Biorefinery for the Production of Single Cell Oils as Advanced Biofuels
  117. Modified TiO 2 photocatalyst for CO 2 photocatalytic reduction: An overview
  118. BIOELECTROCHEMICAL BEHAVIOR OF WILD TYPE BACILLUS CEREUS IN DUAL CHAMBER MICROBIAL FUEL CELL
  119. Correlation of power generation with time-course biofilm architecture using Klebsiella variicola in dual chamber microbial fuel cell
  120. Carbon Nanotube-Modified MnO2 : An Efficient Electrocatalyst for Oxygen Reduction Reaction
  121. Prospect of castor oil biodiesel in Bangladesh: Process development and optimization study
  122. Restoration of liquid effluent from oil palm agroindustry in Malaysia using UV/TiO 2 and UV/ZnO photocatalytic systems: A comparative study
  123. Catalytic pyrolysis of glycerol into syngas over ceria-promoted Ni/α-Al2O3 catalyst
  124. Electrogenic and Antimethanogenic Properties of Bacillus cereus for Enhanced Power Generation in Anaerobic Sludge-Driven Microbial Fuel Cells
  125. Greenhouse gases abatement by catalytic dry reforming of methane to syngas over samarium oxide-supported cobalt catalyst
  126. Preparation and Characterization of Iminodiacetate Group Containing Nonwoven Polyethylene Fabrics and Its Application in Chromium Adsorption
  127. CeO2-TiO2 FOR PHOTOREDUCTION OF CO2 TO METHANOL UNDER VISIBLE LIGHT: EFFECT OF CERIA LOADING
  128. SYNTHESIS, CHARACTERIZATION AND CATALYTIC PERFORMANCE OF CERIA-SUPPORTED COBALT CATALYST FOR METHANE DRY REFORMING TO SYNGAS
  129. Application of Electroporation Technique in Biofuel Processing
  130. Augmentation of air cathode microbial fuel cell performance using wild type Klebsiella variicola
  131. Date palm fiber as a potential low-cost adsorbent to uptake chromium (VI) from industrial wastewater
  132. Modelling and optimization of syngas production by methane dry reforming over samarium oxide supported cobalt catalyst: response surface methodology and artificial neural networks approach
  133. Ultrasound Driven Biofilm Removal for Stable Power Generation in Microbial Fuel Cell
  134. Optimization of photocatalytic degradation of palm oil mill effluent in UV/ZnO system based on response surface methodology
  135. The influence of CuO nanoparticle on non-edible rubber seed oil based alkyd resin preparation and its antimicrobial activity
  136. Technical difficulties and solutions of direct transesterification process of microbial oil for biodiesel synthesis
  137. Textile Effluent Treatment Plant Sludge: Characterization and Utilization in Building Materials
  138. Financial sustainability of biogas technology: Barriers, opportunities, and solutions
  139. Greenhouse gases mitigation by CO2 reforming of methane to hydrogen-rich syngas using praseodymium oxide supported cobalt catalyst
  140. Production of CO-rich Hydrogen Gas from Methane Dry Reforming over Co/CeO2 Catalyst
  141. Syngas production from CO2 reforming of methane over neodymium sesquioxide supported cobalt catalyst
  142. Artificial neural network modeling of hydrogen-rich syngas production from methane dry reforming over novel Ni/CaFe2O4 catalysts
  143. Removal of reactive dye from aqueous solution using coagulation–flocculation coupled with adsorption on papaya leaf
  144. Non-isothermal kinetics and mechanistic study of thermal decomposition of light rare earth metal nitrate hydrates using thermogravimetric analysis
  145. Irradiated sodium-alginate/poly(ethylene oxide) blend films improved by methyl acrylate monomer
  146. Production of CO-rich hydrogen from methane dry reforming over lanthania-supported cobalt catalyst: Kinetic and mechanistic studies
  147. Photocatalytic degradation of recalcitrant POME waste by using silver doped titania: Photokinetics and scavenging studies
  148. Preparation of titania doped argentum photocatalyst and its photoactivity towards palm oil mill effluent degradation
  149. Performance ofKlebsiella oxytocato generate electricity from POME in microbial fuel cell
  150. Catalytic performance of ceria-supported cobalt catalyst for CO-rich hydrogen production from dry reforming of methane
  151. Fast Biofilm Formation and Its Role on Power Generation in Palm Oil Mill Effluent Fed Microbial Fuel Cell
  152. Electricity generation form pretreated palm oil mill effluent using Klebsiella Variicola as an inoculum in Microbial fuel cell
  153. Control of biodegradability in a natural fibre based nanocomposite as a function of impregnated copper nanoparticles
  154. Glycerolysis of palm oil using copper oxide nanoparticles combined with homogeneous base catalyst
  155. Sulfuric disazo dye stabilized copper nanoparticle composite mixture: synthesis and characterization
  156. Investigation of polymer degradation by addition of magnesium
  157. Syngas production from CO2 reforming of methane over ceria supported cobalt catalyst: Effects of reactants partial pressure
  158. CeO2-TiO2 as a visible light active catalyst for the photoreduction of CO2 to methanol
  159. Photocatalytic-Fenton Degradation of Glycerol Solution over Visible Light-Responsive CuFe2O4
  160. Photocatalytic reduction of CO2 into methanol over CuFe2O4/TiO2 under visible light irradiation
  161. Tea dust as a potential low-cost adsorbent for the removal of crystal violet from aqueous solution
  162. Gamma-Irradiated Gelatin-Based Films Modified by HEMA for Medical Application
  163. Effect of Manganese on Radiation Vulcanization of Natural Rubber
  164. CO2 reforming of glycerol over La-Ni/Al2O3 catalyst: A longevity evaluative study
  165. Performance of a submerged adsorption column compared with conventional fixed-bed adsorption
  166. Enhanced power generation using controlled inoculum from palm oil mill effluent fed microbial fuel cell
  167. Evaluation of the photocatalytic degradation of pre-treated palm oil mill effluent (POME) over Pt-loaded titania
  168. Syngas production from glycerol-dry(CO2) reforming over La-promoted Ni/Al2O3 catalyst
  169. Schottky barrier and surface plasmonic resonance phenomena towards the photocatalytic reaction: study of their mechanisms to enhance photocatalytic activity
  170. Facile synthesis of copper nanoparticles in glycerol at room temperature: formation mechanism
  171. Recent advances in multicomponent reactions involving carbohydrates
  172. Tailoring base catalyzed synthesis of palm oil based alkyd resin through CuO nanoparticles
  173. Physicochemical and micromechanical investigation of a nanocopper impregnated fibre reinforced nanocomposite
  174. Synthesis and characterization of a CaFe2O4 catalyst for oleic acid esterification
  175. Effect of waste rubber powder as filler for plywood application
  176. MnO2/CNT as ORR Electrocatalyst in Air-Cathode Microbial Fuel Cells
  177. Effect of CuO Nanoparticle on Mechanical and Thermal Properties of Palm Oil Based Alkyd/Epoxy Resin Blend
  178. Copper nanoparticle in cationized palm oil fibres: physico-chemical investigation
  179. Catalytic performance of cement clinker supported nickel catalyst in glycerol dry reforming
  180. Removal of dark blue-GL from wastewater using water hyacinth: a study of equilibrium adsorption isotherm
  181. Phototreatment of Palm Oil Mill Effluent (POME) over Cu/TiO2 Photocatalyst
  182. Assessment of organic acid-rich bio-sap to generate electricity
  183. Effect of biofilm formation on the performance of microbial fuel cell for the treatment of palm oil mill effluent
  184. Effect of visible light on catalytic hydrolysis of p-nitrophenyl palmitate by the Pseudomonas cepacia lipase immobilized on sol–gel support
  185. Preparation and Characterization of Biodiesel from Karanja Oil by Using Silica Gel Reactor
  186. Kinetic study of biodiesel production from soybean oil
  187. Synthesis and characterization of CuO/C catalyst for the esterification of free fatty acid in rubber seed oil
  188. Conversion of Cellulosic waste into fermentable sugar: Process optimization
  189. Kinematic study of reducing sugar production from rice straw by raw wood-rotting enzyme strain
  190. Aphanamixis Polystachya: A Potential Non-Edible Source of Biodiesel in Bangladesh
  191. Design and Fabrication of Membrane Less Microbial Fuel Cell (ML-MFC) using Food Industries Wastewater for Power Generation
  192. Treatment of Textile Dyes by Bio-chemical Process in Stirred Tank Sequencing Batch Bioreactor (STSBBR)
  193. Optimization of Three-Step Method For Biodiesel Production From Waste Cook Oil
  194. Potentiality of Biodiesel Production From Non-Edible Oil: Bangladesh Perspective
  195. Production of Bio-fuel (Bio-ethanol) from Biomass (Pteris) by Fermentation Process with Yeast
  196. <i>In-Situ</i> Impregnation of Copper Nanoparticles on Palm Empty Fruit Bunch Powder
  197. Light Induced Esterification of Oleic Acid Catalyzed by Pseudomonas Cepacia Lipase
  198. Wastewater treatment and electricity generation by membrane less microbial fuel
  199. Synthesis of Copper Nanoparticles at Room Temperature Using Hydrazine in Glycerol
  200. Uptake of Indosol Dark-blue GL dye from aqueous solution by water hyacinth roots powder: adsorption and desorption study
  201. Biosynthesis of poly(3-hydroxybutyrate) (PHB) by Cupriavidus necator H16 from jatropha oil as carbon source
  202. Preparation and Optimization of Biodiesel Production from Mixed Feedstock Oil
  203. Cu nanoparticles for improving the mechanical performances of oil palm empty fruit bunch fibers as analyzed by Weibull model
  204. Synthesis of copper nanoparticles and their antimicrobial performances in natural fibres
  205. Synthesis of Biodiesel from Waste Cooking Oil
  206. Modification of oil palm empty fruit bunch fibers by nanoparticle impregnation and alkali treatment
  207. Bioelectricity Generation from Palm Oil Mill Effluent in Microbial Fuel Cell Using Polacrylonitrile Carbon Felt as Electrode
  208. Factors Affecting the Performance of Double Chamber Microbial Fuel Cell for Simultaneous Wastewater Treatment and Power Generation
  209. Graphene-dispersive solid-phase extraction of phthalate acid esters from environmental water
  210. Amylatic Activity of Agaricus and Moulds for the Production of Bioethanol
  211. Development of Cu Nanoparticle Loaded Oil Palm Fibre Reinforced Nanocomposite
  212. Kinetic Analysis on Cell Growth and Biosynthesis of Poly (3-Hydroxybutyrate) (PHB) in Cupriavidus Necator H16
  213. Biodegradability of Nanoparticle Modified Fiber Reinforced Polyester Resin Nanocomposite
  214. Treatment of Palm Oil Mill Effluent in Microbial Fuel Cell Using Polyacrylonitrile Carbon Felt as Electrode
  215. Structures and performances of simultaneous ultrasound and alkali treated oil palm empty fruit bunch fiber reinforced poly(lactic acid) composites
  216. Synthesis and characterization of radiation grafted films for removal of arsenic and some heavy metals from contaminated water
  217. Photocatalytic Degradation of Reactive Yellow in Batch and Continuous Photoreactor Using Titanium Dioxide
  218. Generation of Bio-electricity by Microbial Fuel Cells
  219. Papaya (Carica papaya L.) Leaf Powder: Novel Adsorbent for Removal of Methylene Blue from Aqueous Solution
  220. Performance of the Salt Bridge Based Microbial Fuel Cell
  221. Comparison of Extraction Techniques on Extraction of Gallic Acid From Stem Bark of Jatropha curcas
  222. Effect of Jatropha Seed Oil Meal and Rubber Seed Oil Meal as Melamine Urea Formaldehyde Adhesive Extender on the Bonding Strength of Plywood
  223. Methylene Blue Adsorption onto Water Hyacinth: Batch and Column Study
  224. Effect of Palm Kernel Meal as Melamine Urea Formaldehyde Adhesive Extender for Plywood Application: Using a Fourier Transform Infrared Spectroscopy (FTIR) Study
  225. Rubber seed oil as a potential source for biodiesel production in Bangladesh
  226. Preparation and Characterization of Radiation Grafted Proton Exchange Membranes of LLDPE
  227. Adsorption of methylene blue from aqueous solution by jackfruit (Artocarpus heteropyllus) leaf powder: A fixed-bed column study
  228. Kinetics and mechanism of Cr(VI) adsorption onto tea-leaves waste
  229. Potentiality of open burnt clay as an adsorbent for the removal of Congo red from aqueous solution
  230. Using Pt sols to prepare low Pt-loading electrodes for polymer electrolyte fuel cells
  231. The preparation of Pt nanoparticles by methanol and citrate
  232. Platinum states in citrate sols by EXAFS
  233. Adsorption Equilibrium and Adsorption Kinetics: A Unified Approach
  234. Notice of Violation of IEEE Publication Principles: Power aided zone based routing for mobile ad hoc network
  235. Reactive Gas Solubility in Water:  An Empirical Relation