All Stories

  1. Effect of powder properties on dust dispersion behavior in rectangular enclosure: Insights from oat and tea powder cloud dynamics
  2. Validation of physical properties of coals by conventional method with thermogravimetric analysis
  3. 2D and 3D particle image velocimetry measurement of air flow over a scaled-down model of Bukit Gemok in Telok Kalong industrial area
  4. Thermal degradation kinetics of andrographolide, 14-deoxy-11,12-didehydroandrographolide and neoandrographolide extracted from Andrographis paniculata’s plant at different temperature
  5. Characteristics of dust cloud formation: The effect of conveying speed on flow field of tea powder
  6. Mass spectrometry analysis of auxiliary energy-induced terpenes extraction from Andrographis Paniculata
  7. Thermal and mechanical properties of bamboo fiber reinforced composites
  8. Biodiesel synthesized from waste cooking oil in a continuous microwave assisted reactor reduced PM and NOx emissions
  9. Dispersion of Irregular Particles during Free Fall
  10. Ultrasound-assisted extraction for enhanced retention of physicochemical properties of garlic powder obtained by spray-drying
  11. Assessment on antioxidant activity and physical characteristics of spray dried Mahkota Dewa fruit extracts
  12. Effect of Soil Burial on Mechanical Properties of Bamboo Fiber Reinforced Epoxy Composites
  13. Explosion of rice flour at different concentration and moisture content
  14. Influence of monsoon seasons on accidental chlorine leak and dispersion around Gebeng industrial area
  15. Modeling the effect of hypothetical chlorine leakage from Malay-Sino Chemical Industries using ALOHA software and development of an emergency evacuation route around Teluk Kalong industrial area
  16. Effect of Solution Properties and Operating Parameters on Needleless Electrospinning of Poly(Ethylene Oxide) Nanofibers Loaded with Bovine Serum Albumin
  17. Experimental measurement for non-spherical bulk materials flow behaviour in rectangular enclosure
  18. Assessment of explosibility and explosion severity of rice flour at different concentration and ignition time
  19. Thermal performance enhancement of non-premixed syngas combustion in a partial combustion unit by winged nozzle: Experimental and CFD study
  20. Strengthening of Reinforced Concrete Beams Using Bamboo Fiber/Epoxy Composite Plates in Flexure
  21. Correlation between the extraction yield of mangiferin to the antioxidant activity, total phenolic and total flavonoid content of Phaleria macrocarpa fruits
  22. Acid Hydrolysis of Chitosan to Oligomers Using Hydrochloric Acid
  23. An Overview of Chitosan Nanofibers and their Applications in the Drug Delivery Process
  24. Synthesis and characterization of a La Ni/α-Al2O3 catalyst and its use in pyrolysis of glycerol to syngas
  25. Assessment of chlorine leak dispersion around Gebeng industrial area and potential evacuation route
  26. Orthosiphon stamineus (Java Tea)
  27. Assessment of Maceration, Ultrasonic and Microwave Assisted Extraction for Total Phenolic Content, Total Flavonoid Content and Kaempferol Yield from Cassia alata via Microstructures Analysis
  28. Assessment of Size Reduction and Extraction Methods on the Yield of Gallic Acid from Labisia pumila Leaf via Microstructures Analysis
  29. Effect of Humidity on Formation of Electrospun Polycaprolactone Nanofiber Embedded with Curcumin using Needdleless Electrospinning
  30. A Comprehensive Review on Ocimum basilicum
  31. Assessment of Phenolic Compounds Stability and Retention during Spray Drying of Phyllanthus niruri Extracts
  32. Comparison of Microwave and Ultrasonic Assisted Extraction of Kaempferol from Cassia Alata
  33. Optimisation of Gallic Acid and Quercetin Extraction from Phyllanthus Niruri
  34. A Computational Fluid Dynamics Study of Turbulence, Radiation, and Combustion Models for Natural Gas Combustion Burner
  35. Strengthening Performance of PALF-Epoxy Composite Plate on Reinforced Concrete Beams
  36. INFLUENCE OF ALKALI TREATMENT ON PHYSICO-CHEMICAL PROPERTIES OF MALAYSIAN BAMBOO FIBER: A PRELIMINARY STUDY
  37. Potential External strengthening of reinforced concrete beam using natural fiber composite plate
  38. Modelling of gas-liquid flow in airlift
  39. Catalytic pyrolysis of glycerol into syngas over ceria-promoted Ni/α-Al2O3 catalyst
  40. Metformin - A Panacea Pharmaceutical Agent through convergence revolution initiative
  41. Potential Use of Bamboo Reinforced Concrete Beams towards Sustainable Construction
  42. Natural Resources Product Prospects - International Conference on Fluids and Chemical Engineering-FluidChE 2017, Malaysia
  43. Optimization of Ultrasonic-Assisted Extraction of Polyphenolic and Flavonoids from Labisia pumila
  44. Microwave-Irradiation Induced Fast Simultaneous Extraction of Methoxylated and Hydroxylated Phenolic Compounds from Orthosiphon stamineus Leaves
  45. Computational Fluid Dynamics Modelling of the Dairy Drying Processes
  46. Renewable syngas production from thermal cracking of glycerol over praseodymium-promoted Ni/Al 2 O 3 catalyst
  47. Natural Fiber Composites as Potential External Strengthening Material – A Review
  48. Ultrasonic Assisted Extraction on Phenolic and Flavonoid Content from Phyllanthus niruri Plant
  49. Understanding the Effect of Surface Terrain on Pollution Transport around Gebeng Industrial Area
  50. Experimental measurement and CFD simulation on the hydrodynamics of an internal-loop airlift reactor
  51. The effect of particle size and solvent type on the gallic acid yield obtained from Labisia pumila by ultrasonic extraction
  52. The effect of auxiliary energy on rhein, kaempferol and astragalin extraction from Cassia alata
  53. Magnesium sulphate and β-alanine enhanced the ability of Kluyveromyces marxianus producing bioethanol using oil palm trunk sap
  54. Microwave Reinforced Transesterification of Rubber Seed Oil Using Waste Cement Clinker Catalyst
  55. Characterization of Ag-promoted Ni/SiO2 Catalysts for Syngas Production via Carbon Dioxide (CO2) Dry Reforming of Glycerol
  56. Samarium Promoted Ni/Al2O3 Catalysts for Syngas Production from Glycerol Pyrolys
  57. A study on the kinetics of syngas production from glycerol over alumina-supported samarium–nickel catalyst
  58. Scale-adaptive simulation on the reactive turbulent flow in a partial combustion lance: Assessment of thermal insulators
  59. Needleless Electrospinning Technology – An Entrepreneurial Perspective
  60. Modeling of Methyl Methacrylate Polymerization Using MATLAB
  61. Three-Way Coupling Simulation of a Gas-Liquid Stirred Tank using a Multi-Compartment Population Balance Model
  62. Influence of nozzle design on the performance of a partial combustion lance: A CFD study
  63. Economical Biodiesel Fuel Synthesis from Castor Oil Using Mussel Shell-Base Catalyst (MS-BC)
  64. Effect of the Polymer Composition on the Physicochemical Properties of Microencapsulated Fish Oil Using Spray Drying
  65. Unsteady RANS and detached eddy simulation of the multiphase flow in a co-current spray drying
  66. Analysis of dust distribution in silo during axial filling using computational fluid dynamics: Assessment on dust explosion likelihood
  67. ENERGY DISSIPATION REDUCTION USING SIMILARLY-CHARGED POLYMER-SURFACTANT COMPLEX
  68. CO2 reforming of glycerol over La-Ni/Al2O3 catalyst: A longevity evaluative study
  69. Influence of nutrient addition on the bioethanol yield from oil palm trunk sap fermented by Saccharomyces cerevisiae
  70. Syngas production from glycerol-dry(CO2) reforming over La-promoted Ni/Al2O3 catalyst
  71. Thermal degradation kinetics of nicotinic acid, pantothenic acid and catechin derived from Averrhoa bilimbi fruits
  72. Successive optimisation of waste cooking oil transesterification in a continuous microwave assisted reactor
  73. Extraction and Microencapsulation of Polyphenols from Orthosiphon Stamineus Leaves
  74. Transesterification of Waste Cooking Oil using Chemically Treated Catalyst
  75. Synthesis and characterisation of cement clinker-supported nickel catalyst for glycerol dry reforming
  76. Catalytic performance of cement clinker supported nickel catalyst in glycerol dry reforming
  77. Assessment of phenolic compounds stability and retention during spray drying of Orthosiphon stamineus extracts
  78. Production of CO-rich hydrogen gas from glycerol dry reforming over La-promoted Ni/Al2O3 catalyst
  79. Characterization of La-promoted Ni/Al2O3 catalysts for hydrogen production from glycerol dry reforming
  80. Prediction of Particles-Air Movement in Silo during Filling Operation
  81. Application of Cement Clinker as Ni-Catalyst Support for Glycerol Dry Reforming
  82. Hydrogen Production via Glycerol Dry Reforming over La-Ni/Al2O3 Catalyst
  83. Biodiesel Production from Rubber Seed Oil using Activated Cement Clinker as Catalyst
  84. Thermal Denaturation Kinetics of Whey Protein and Maltodextrin Mixture
  85. Assessment on Bioavailability of Flavonoids from Orthosiphon Stamineus During Spray Drying
  86. Hydrogen as Carbon Gasifying Agent During Glycerol Steam Reforming over Bimetallic Co-Ni Catalyst
  87. Biodiesel Production from Rubber Seed Oil Using A Limestone Based Catalyst
  88. Detached eddy simulation on the turbulent flow in a stirred tank
  89. A Study of Particle Histories during Spray Drying Using Computational Fluid Dynamic Simulations
  90. Application of Computational Fluid Dynamics (CFD) Simulations to Spray-Freezing Operations
  91. Simultaneous Quadrature Method of Moments for the Solution of Population Balance Equations, Using a Differential Algebraic Equation Framework
  92. Modelling of mass transfer in gas–liquid stirred tanks agitated by Rushton turbine and CD-6 impeller: A scale-up study
  93. CFD Simulation of Aerocyclone Hydrodynamics and Performance at Extreme Temperature
  94. A CFD study of the effect of cone dimensions on sampling aerocyclones performance and hydrodynamics
  95. Corrigendum to “The influence of temperature and inlet velocity on cyclone pressure drop: A CFD study” [Chem. Eng. Process. 44 (1) (2005) 7–12]
  96. Adsorption of basic dye onto palm kernel shell activated carbon: sorption equilibrium and kinetics studies
  97. Prediction of the effects of cone tip diameter on the cyclone performance
  98. A CFD Study on the Prediction of Cyclone Collection Efficiency
  99. The influence of temperature and inlet velocity on cyclone pressure drop: a CFD study
  100. Bioreactor design via spreadsheet––a study on the monosodium glutamate (MSG) process
  101. Prediction of the Effect of Dimension, Particle Density, Temperature, and Inlet Velocity on Cyclone Collection Efficiency
  102. The influence of temperature and inlet velocity on cyclone pressure drop: a CFD study
  103. Comment on: “Performance of different analytical methods in evaluating grade efficiency of centrifugal separators” by Ray M.B., Hoffmann A.C. and Postma R.S. (2000)
  104. Computational Fluid Mixing