All Stories

  1. CO 2 Detection Using Potentiometric Sensors Based on PIM‐1/DES Membranes

    Article • Advanced Sensor Research, July 2026, Wiley

    Dr. Mattia Bartoli

  2. Cheese industry wastewater valorization as catalytic system for hydrogen generation through amino borane derivatives

    Article • International Journal of Hydrogen Energy, May 2026, Elsevier

    Dr. Mattia Bartoli

  3. Impact of Processing and Char Feedstock on the Thermal, Mechanical, and Electrical Behavior of PLLA Composites

    Article • Polymers, April 2026, MDPI AG

    Dr. Mattia Bartoli

  4. Recyclability of Flame-Retardant Polypropylene: Property and Flame Retardancy Assessment

    Article • Polymers, March 2026, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  5. Size-dependent selectivity of Cu2O nanocube catalysts for CO2 reduction at industrial current densities

    Article • Electrochimica Acta, March 2026, Elsevier

    Dr. Mattia Bartoli

  6. Highly Conductive, Ceramic‐Rich Hybrid Ionogel Electrolytes for Room‐Temperature Li‐Metal Batteries

    Article • ChemElectroChem, February 2026, Wiley

    Dr. Mattia Bartoli

  7. Ultrasound induced hydrogen release from ammonia borane mediated by oxidized multiwalled carbon nanotube under hydrolytic conditions

    Article • Applied Surface Science, February 2026, Elsevier

    Dr. Mattia Bartoli

  8. Morphed graphene as reinforcement for oil-well class G cement composites

    Article • Materials Letters, February 2026, Elsevier

    Dr. Mattia Bartoli

  9. A Comprehensive Review on Hydrogen Production from Biomass Gasification

    Article • Molecules, December 2025, MDPI AG

    Dr. Mattia Bartoli

  10. A Perspective on Hydrogen Storage in the Energetic Transition Scenario

    Article • Energies, December 2025, MDPI AG

    Dr. Mattia Bartoli

  11. Tuning the Solid-State Hydrogen Release of Ammonia Borane by Entrapping the Intermediates: The Role of High-Boiling-Point Amines

    Article • Molecules, October 2025, MDPI AG

    Dr. Mattia Bartoli

  12. Unconventional Mining of End-of-Life Aircrafts: A Systematic Review

    Article • Recycling, September 2025, MDPI AG

    Dr. Mattia Bartoli

  13. Characterization and evaluation of commercial biochar for surface water purification

    Article • Sustainable Horizons, September 2025, Elsevier

    Dr. Mattia Bartoli

  14. A prototype Mars regolith simulant (P_TO_MARS-1) exploiting the geology of the Piedmont region (NW Italy)

    Article • Journal of the Geological Society, July 2025, Geological Society

    Dr. Mattia Bartoli

  15. Microwave‐Assisted Synthesis of IrNi Electrocatalysts for the Oxygen Evolution Reaction in Acidic Electrolyte

    Article • ChemistryOpen, July 2025, Wiley

    Dr. Mattia Bartoli

  16. A Concise Overview of the Use of Low-Dimensional Molybdenum Disulfide as an Electrode Material for Li-Ion Batteries and Beyond

    Article • Batteries, July 2025, MDPI AG

    Dr. Mattia Bartoli

  17. Complex Waste Stream Utilization for Hydrogen Evolution: Ammonia Borane Hydrolysis Over Red Mud Catalyst Under Mild Conditions

    Article • Catalysis Letters, July 2025, Springer Science + Business Media

    Dr. Mattia Bartoli

  18. Comparative Study of ZnO and ZnFe₂O₄ Microparticle and Nanoparticle-Based Screen-Printed Electrodes in pH Sensing

    Article • IEEE Sensors Journal, April 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Mattia Bartoli

  19. Effect of Cr substitution in ZnFe2O4 nanoparticles on the electron transfer at electrochemical interfaces

    Article • Materials Research Bulletin, March 2025, Elsevier

    Dr. Mattia Bartoli

  20. Improving wear resistance of epoxy resin using bio-oil from hemp biomass: A sound strategy to reduce environmental impact

    Article • Journal of Cleaner Production, March 2025, Elsevier

    Dr. Mattia Bartoli

  21. A Concise Review of Recent Advancements in Carbon Nanotubes for Aerospace Applications

    Article • Micromachines, December 2024, MDPI AG

    Dr. Mattia Bartoli

  22. Investigation of Solid-State Thermal Decomposition of Ammonia Borane Mix with Sulphonated Poly(ellagic Acid) for Hydrogen Release

    Article • Polymers, December 2024, MDPI AG

    Dr. Mattia Bartoli

  23. Polyamide 6 recycled fishing nets modified with biochar fillers: An effort toward sustainability and circularity

    Article • Materials Today Communications, December 2024, Elsevier

    Dr. Mattia Bartoli

  24. Hemp Waste Stream Valorization Through Pyrolytic Carbonization for Epoxy Composite Strengthening

    Article • Journal of Composites Science, November 2024, MDPI AG

    Dr. Mattia Bartoli

  25. Unveiling the effect of Bi in ZnFe2O4 nanoparticles in electrochemical sensors

    Article • Applied Surface Science, November 2024, Elsevier

    Dr. Mattia Bartoli

  26. European Transition to Electric Vehicles: Italy as a Case of Study

    Article • Batteries, October 2024, MDPI AG

    Dr. Mattia Bartoli

  27. Investigating the Significances of Thiol Functionalities in SARS-CoV-2 Using Carbon Dots for Viral Inhibition

    Article • ACS Applied Materials & Interfaces, October 2024, American Chemical Society (ACS)

    Dr. Mattia Bartoli

  28. Miscanthus-Derived Biochar as a Platform for the Production of Fillers for the Improvement of Mechanical and Electromagnetic Properties of Epoxy Composites

    Article • C – Journal of Carbon Research, September 2024, MDPI AG

    Dr. Mattia Bartoli

  29. Coffee waste-derived biochar as a flame retardant for epoxy nanocomposites

    Article • Sustainable Materials and Technologies, September 2024, Elsevier

    Dr. Mattia Bartoli

  30. Enhanced CO₂ Detection Using Potentiometric Sensors Based on PIM‐1/DBU Imidazolate Membranes

    Article • Advanced Sustainable Systems, August 2024, Wiley

    Dr. Mattia Bartoli

  31. Interface properties of nanostructured carbon-coated biological implants: an overview

    Article • Beilstein Journal of Nanotechnology, August 2024, Beilstein Institut

    Dr. Mattia Bartoli

  32. Enhancing Electrochemical Sensor Performance: Studies of Electrodes Tailored with ZnO/ZnFe2O4 Nanoparticles

    Article • ECS Meeting Abstracts, August 2024, The Electrochemical Society

    Dr. Mattia Bartoli

  33. Magnetic adsorbents from co‐pyrolysis of non‐woody biomass and red mud for water decontamination

    Article • The Canadian Journal of Chemical Engineering, July 2024, Wiley

    Dr. Mattia Bartoli

  34. Carbon dots as dual inhibitors of tau and amyloid-beta aggregation for the treatment of Alzheimer's disease

    Article • Acta Biomaterialia, July 2024, Elsevier

    Dr. Mattia Bartoli

  35. A perspective on bismuth based materials for the photodegradation of organic pollutants

    Article • Environmental Nanotechnology Monitoring & Management, May 2024, Elsevier

    Dr. Mattia Bartoli

  36. A Concise Overview of Ultrasound-Assisted Techniques for the Production of 2D Materials

    Article • Processes, April 2024, MDPI AG

    Dr. Mattia Bartoli

  37. Pristine and engineered biochar as Na-ion batteries anode material: A comprehensive overview

    Article • Renewable and Sustainable Energy Reviews, April 2024, Elsevier

    Dr. Mattia Bartoli

  38. The art of simplicity: Water-soluble porphyrin-like carbon dots self-assemble into mesmerizing red glow

    Article • Colloids and Surfaces B Biointerfaces, February 2024, Elsevier

    Dr. Mattia Bartoli

  39. A Comprehensive Review of Electromagnetic Interference Shielding Composite Materials

    Article • Micromachines, January 2024, MDPI AG

    Dr. Mattia Bartoli

  40. Small Warriors of Nature: Novel Red Emissive Chlorophyllin Carbon Dots Harnessing Fenton‐Fueled Ferroptosis for In Vitro and In Vivo Cancer Treatment

    Article • Small, January 2024, Wiley

    Dr. Mattia Bartoli

  41. A Short Overview on Graphene and Graphene-Related Materials for Electrochemical Gas Sensing

    Article • Materials, January 2024, MDPI AG

    Dr. Mattia Bartoli

  42. Hydrogen evolution through ammonia borane hydrolysis over iron tailored pig manure catalyst

    Article • International Journal of Hydrogen Energy, January 2024, Elsevier

    Dr. Mattia Bartoli

  43. Biochar: Advances in Research and Applications

    Article • January 2024, Nova Science Publishers, Inc.

    Dr. Mattia Bartoli

  44. Advancing glioblastoma imaging: Exploring the potential of organic fluorophore-based red emissive carbon dots

    Article • Journal of Colloid and Interface Science, November 2023, Elsevier

    Dr. Mattia Bartoli

  45. ZnCr2- x Fe x O 4 Nanoparticles-Modified Electrochemical Sensors: A Comparative Study

    Article • October 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Mattia Bartoli

  46. Microwave-assisted synthesis of N/S-doped CNC/SnO2 nanocomposite as a promising catalyst for oxygen reduction in alkaline media

    Article • Materials Chemistry and Physics, October 2023, Elsevier

    Dr. Mattia Bartoli

  47. A Comprehensive Overview on Biochar-Based Materials for Catalytic Applications

    Article • Catalysts, September 2023, MDPI AG

    Dr. Mattia Bartoli

  48. Tin sulfide supported on cellulose nanocrystals-derived carbon as a green and effective catalyst for CO2 electroreduction to formate

    Article • Journal of Materials Science, September 2023, Springer Science + Business Media

    Dr. Mattia Bartoli

  49. Unraveling the Effect of the Chemical and Structural Composition of ZnxNi1−xFe2O4 on the Electron Transfer at the Electrochemical Interface

    Article • Small Structures, August 2023, Wiley

    Dr. Mattia Bartoli

  50. Tailoring the Magnetic and Electrical Properties of Epoxy Composites Containing Olive-Derived Biochar through Iron Modification

    Article • Nanomaterials, August 2023, MDPI AG

    Dr. Mattia Bartoli

  51. Optimizing the Performance of Low-Loaded Electrodes for CO2-to-CO Conversion Directly from Capture Medium: A Comprehensive Parameter Analysis

    Article • Nanomaterials, August 2023, MDPI AG

    Dr. Mattia Bartoli

  52. Simultaneous and Selective Detection of Etoposide and Methotrexate With Single Electrochemical Sensors for Therapeutic Drug Monitoring

    Article • IEEE Sensors Letters, August 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Mattia Bartoli

  53. ZnMxFe2-xO4 (M=Cr, Bi) Nanoparticles-modified electrochemical sensors: Effect on sensitivity and first-order kinetic rate constant

    Article • July 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Mattia Bartoli

  54. Computational Investigation of Interactions between Carbon Nitride Dots and Doxorubicin

    Article • Molecules, June 2023, MDPI AG

    Dr. Mattia Bartoli

  55. Vortex dynamics in NbTi films at high frequency and high DC magnetic fields

    Article • Scientific Reports, June 2023, Springer Science + Business Media

    Dr. Mattia Bartoli

  56. Nano-carrier for gene delivery and bioimaging based on pentaetheylenehexamine modified carbon dots

    Article • Journal of Colloid and Interface Science, June 2023, Elsevier

    Dr. Mattia Bartoli

  57. Cancer cells inhibition by cationic carbon dots targeting the cellular nucleus

    Article • Journal of Colloid and Interface Science, May 2023, Elsevier

    Dr. Mattia Bartoli

  58. Unraveling the Biochar Potential as Filler for Composites Preparation

    Article • Macromolecular Symposia, April 2023, Wiley

    Dr. Mattia Bartoli

  59. A Short Review on Nanostructured Carbon Containing Biopolymer Derived Composites for Tissue Engineering Applications

    Article • Polymers, March 2023, MDPI AG

    Dr. Mattia Bartoli

  60. An Overview on Carbon Quantum Dots Optical and Chemical Features

    Article • Molecules, March 2023, MDPI AG

    Dr. Mattia Bartoli

  61. Effect of Hemp Hurd Biochar and Humic Acid on the Flame Retardant and Mechanical Properties of Ethylene Vinyl Acetate

    Article • Polymers, March 2023, MDPI AG

    Dr. Mattia Bartoli

  62. Cement-Based Composites Containing Oxidized Graphene Nanoplatelets: Effects on the Mechanical and Electrical Properties

    Article • Nanomaterials, February 2023, MDPI AG

    Dr. Mattia Bartoli

  63. Investigation into Red Emission and Its Applications: Solvatochromic N-Doped Red Emissive Carbon Dots with Solvent Polarity Sensing and Solid-State Fluorescent Nanocomposite Thin Films

    Article • Molecules, February 2023, MDPI AG

    Dr. Mattia Bartoli

  64. Effect of Red Mud Addition on Electrical and Magnetic Properties of Hemp-Derived-Biochar-Containing Epoxy Composites

    Article • Micromachines, February 2023, MDPI AG

    Dr. Mattia Bartoli

  65. Hydrothermal vs microwave nanoarchitechtonics of carbon dots significantly affects the structure, physicochemical properties, and anti-cancer activity against a specific neuroblastoma cell line

    Article • Journal of Colloid and Interface Science, January 2023, Elsevier

    Dr. Mattia Bartoli

  66. Reply to Meier, R.J. Comment on “Tagliaferro et al. Introducing the Novel Mixed Gaussian-Lorentzian Lineshape in the Analysis of the Raman Signal of Biochar. Nanomaterials 2020, 10, 1748”

    Article • Nanomaterials, December 2022, MDPI AG

    Dr. Mattia Bartoli

  67. Ionic Liquids-Polymer of Intrinsic Microporosity (PIMs) Blend Membranes for CO2 Separation

    Article • Membranes, December 2022, MDPI AG

    Dr. Mattia Bartoli

  68. Effect of heating rate and feedstock nature on electrical conductivity of biochar and biochar-based composites

    Article • Applications in Energy and Combustion Science, December 2022, Elsevier

    Dr. Mattia Bartoli

  69. Reversible Tuning of Superconductivity in Ion-Gated NbN Ultrathin Films by Self-Encapsulation with a High- κ Dielectric Layer

    Article • Physical Review Applied, November 2022, American Physical Society (APS)

    Dr. Mattia Bartoli

  70. Repurposing Face Masks after Use: From Wastes to Anode Materials for Na-Ion Batteries

    Article • Batteries, October 2022, MDPI AG

    Dr. Mattia Bartoli

  71. Ethylene-Vinyl Acetate (EVA) Containing Waste Hemp-Derived Biochar Fibers: Mechanical, Electrical, Thermal and Tribological Behavior

    Article • Polymers, October 2022, MDPI AG

    Dr. Mattia Bartoli

  72. Unraveling the Effect of Carbon Nanotube Oxidation on Solid-State Decomposition of Ammonia Borane/Carbon Nanotube Composites

    Article • The Journal of Physical Chemistry C, September 2022, American Chemical Society (ACS)

    Dr. Mattia Bartoli

  73. Concentration and Surface Chemistry Dependent Analyte Orientation on Nanoparticle Surfaces

    Article • The Journal of Physical Chemistry C, September 2022, American Chemical Society (ACS)

    Dr. Mattia Bartoli

  74. Biosolids-based catalyst for oxidative desulphurization of drop-in fuels derived from waste fats

    Article • Fuel, September 2022, Elsevier

    Dr. Mattia Bartoli

  75. Mechanical, electrical, thermal and tribological behavior of epoxy resin composites reinforced with waste hemp-derived carbon fibers

    Article • Journal of Materials Science, August 2022, Springer Science + Business Media

    Dr. Mattia Bartoli

  76. A First Assessment of Carbon Nanotubes Grown on Oil-Well Cement via Chemical Vapor Deposition

    Article • Nanomaterials, July 2022, MDPI AG

    Dr. Mattia Bartoli

  77. Flame retardant potential of Tetra Pak®-derived biochar for ethylene-vinyl-acetate copolymers

    Article • Composites Part C Open Access, July 2022, Elsevier

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  78. The influence of biochar shape on cement-based materials

    Article • Magazine of Concrete Research, June 2022, Emerald

    Dr. Mattia Bartoli

  79. Recent Advances in Biochar Polymer Composites

    Article • Polymers, June 2022, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  80. Structure-activity relationship of carbon nitride dots in inhibiting Tau aggregation

    Article • Carbon, June 2022, Elsevier

    Dr. Mattia Bartoli

  81. Oxidation of Carbon Nanotubes for Improving the Mechanical and Electrical Properties of Oil-Well Cement-Based Composites

    Article • ACS Applied Nano Materials, April 2022, American Chemical Society (ACS)

    Dr. Mattia Bartoli

  82. Perspectives on the use of bismuth-based materials for sensing and removal of water pollutants

    Article • Current Opinion in Environmental Science & Health, April 2022, Elsevier

    Dr. Mattia Bartoli

  83. Engineered biochar derived from pyrolyzed waste tea as a carbon support for Fe-N-C electrocatalysts for the oxygen reduction reaction

    Article • Electrochimica Acta, April 2022, Elsevier

    Dr. Mattia Bartoli

  84. A Review on the Use of Biochar Derived Carbon Quantum Dots Production for Sensing Applications

    Article • Chemosensors, March 2022, MDPI AG

    Dr. Mattia Bartoli

  85. Nanocast nitrogen-containing ordered mesoporous carbons from glucosamine for selective CO2 capture

    Article • Materials Today Sustainability, March 2022, Elsevier

    Dr. Mattia Bartoli

  86. Influence of different dry‐mixing techniques on the mechanical, thermal, and electrical behavior of ultra‐high molecular weight polyethylene/exhausted tire carbon composites

    Article • Polymers for Advanced Technologies, February 2022, Wiley

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  87. Pressure-Responsive Conductive Poly(vinyl alcohol) Composites Containing Waste Cotton Fibers Biochar

    Article • Micromachines, January 2022, MDPI AG

    Dr. Mattia Bartoli

  88. Bio-derived and Waste Fats Use for the Production of Drop-In Fuels

    Article • January 2022, Springer Science + Business Media

    Dr. Mattia Bartoli

  89. Surface modification of carbon nitride dots by nanoarchitectonics for better drug loading and higher cancer selectivity

    Article • Nanoscale, January 2022, Royal Society of Chemistry

    Dr. Mattia Bartoli

  90. Electrodes for Paracetamol Sensing Modified with Bismuth Oxide and Oxynitrate Heterostructures: An Experimental and Computational Study

    Article • Chemosensors, December 2021, MDPI AG

    Dr. Mattia Bartoli

  91. Morphology and Mechanical Properties of Epoxy/Synthetic Fiber Composites

    Article • December 2021, Springer Science + Business Media

    Dr. Mattia Bartoli

  92. Effect of Thermal Stabilization on PAN-Derived Electrospun Carbon Nanofibers for CO2 Capture

    Article • Polymers, November 2021, MDPI AG

    Dr. Mattia Bartoli

  93. Biochar-Supported TiO2-Based Nanocomposites for the Photocatalytic Degradation of Sulfamethoxazole in Water—A Review

    Article • Toxics, November 2021, MDPI AG

    Dr. Mattia Bartoli

  94. Overview on Classification of Flame-Retardant Additives for Polymeric Matrix

    Article • November 2021, American Chemical Society (ACS)

    Dr. Mattia Bartoli

  95. Desulphurization of drop-in fuel produced through lipid pyrolysis using brown grease and biosolids feedstocks

    Article • Biomass and Bioenergy, November 2021, Elsevier

    Dr. Mattia Bartoli

  96. Innovative Biochar-Based Composite Fibres from Recycled Material

    Article • Materials, September 2021, MDPI AG

    Dr. Mattia Bartoli

  97. High Frequency Electromagnetic Shielding by Biochar-Based Composites

    Article • Nanomaterials, September 2021, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  98. A Comprehensive Review on Raman Spectroscopy Applications

    Article • Chemosensors, September 2021, MDPI AG

    Dr. Mattia Bartoli

  99. Thermal, dynamic-mechanical and electrical properties of UV-LED curable coatings containing porcupine-like carbon structures

    Article • Materials Today Communications, September 2021, Elsevier

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  100. Defective Bismuth Oxide as Effective Adsorbent for Arsenic Removal from Water and Wastewater

    Article • Toxics, July 2021, MDPI AG

    Dr. Mattia Bartoli

  101. Catalytic oxidative desulphurization of pyrolytic oils to fuels over different waste derived carbon-based catalysts

    Article • Fuel, July 2021, Elsevier

    Dr. Mattia Bartoli

  102. Tuning the microwave electromagnetic properties of biochar-based composites by annealing

    Article • Carbon Trends, July 2021, Elsevier

    Dr. Mattia Bartoli

  103. Nanostructured Bismuth Electrodes for Non-Enzymatic Paracetamol Sensing: Development, Testing, and Computational Approach

    Article • June 2021, MDPI AG

    Dr. Mattia Bartoli

  104. Bismuth-Nanocomposites Modified SPCEs for Non-Enzymatic Electrochemical Sensors

    Article • IEEE Sensors Journal, May 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Mattia Bartoli

  105. Investigation of Different Types of Biochar on the Thermal Stability and Fire Retardance of Ethylene-Vinyl Acetate Copolymers

    Article • Polymers, April 2021, MDPI AG

    Dr. Mattia Bartoli

  106. Biochar-Supported BiOx for Effective Electrosynthesis of Formic Acid from Carbon Dioxide Reduction

    Article • Crystals, March 2021, MDPI AG

    Dr. Mattia Bartoli

  107. A Review of Bio-Oil Production through Microwave-Assisted Pyrolysis

    Article • Processes, March 2021, MDPI AG

    Dr. Mattia Bartoli

  108. A deep investigation into the structure of carbon dots

    Article • Carbon, March 2021, Elsevier

    Dr. Mattia Bartoli

  109. Towards Traditional Carbon Fillers: Biochar-Based Reinforced Plastic

    Article • February 2021, IntechOpen

    Dr. Mattia Bartoli

  110. High-Temperature Annealed Biochar as a Conductive Filler for the Production of Piezoresistive Materials for Energy Conversion Application

    Article • ACS Applied Electronic Materials, January 2021, American Chemical Society (ACS)

    dr Carlo Rosso, Dr. Mattia Bartoli

  111. A Review on Recent Advancements of Graphene and Graphene-Related Materials in Biological Applications

    Article • Applied Sciences, January 2021, MDPI AG

    Dr. Mattia Bartoli

  112. New Concept in Bioderived Composites: Biochar as Toughening Agent for Improving Performances and Durability of Agave-Based Epoxy Biocomposites

    Article • Polymers, January 2021, MDPI AG

    Dr. Mattia Bartoli

  113. Biopolymer-nanoparticles hybrids

    Article • January 2021, Elsevier

    Dr. Mattia Bartoli

  114. Drug delivery

    Article • January 2021, Elsevier

    Dr. Mattia Bartoli

  115. Flame retardant polymer systems containing biochar: current state-of-the-art and perspectives

    Article • December 2020, Institute of Physics Publishing

    Dr. Mattia Bartoli

  116. A Short Review on Biomedical Applications of Nanostructured Bismuth Oxide and Related Nanomaterials

    Article • Materials, November 2020, MDPI AG

    Dr. Mattia Bartoli

  117. Bio-oils from microwave assisted pyrolysis of kraft lignin operating at reduced residual pressure

    Article • Fuel, October 2020, Elsevier

    Dr. Mattia Bartoli

  118. State-of-the-Art Polymer Science and Technology in Italy (2019,2020)

    Article • September 2020, MDPI AG

    Dr. Mattia Bartoli

  119. Graphene and Lithium-Based Battery Electrodes: A Review of Recent Literature

    Article • Energies, September 2020, MDPI AG

    Dr. Mattia Bartoli

  120. Introducing the Novel Mixed Gaussian-Lorentzian Lineshape in the Analysis of the Raman Signal of Biochar

    Article • Nanomaterials, September 2020, MDPI AG

    Dr. Mattia Bartoli

  121. Cheap and easily processable electrode/electrolytes for next-generation sodium-ion batteries

    Article • Renewable Energy and Power Quality Journal, June 2020, UK Zhende Publishing Limited Company

    Dr. Mattia Bartoli

  122. Pyrolysis of fatty acids derived from hydrolysis of brown grease with biosolids

    Article • Environmental Science and Pollution Research, May 2020, Springer Science + Business Media

    Dr. Mattia Bartoli

  123. Poly(lactic Acid)–Biochar Biocomposites: Effect of Processing and Filler Content on Rheological, Thermal, and Mechanical Properties

    Article • Polymers, April 2020, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  124. Phytic Acid and Biochar: An Effective All Bio-Sourced Flame Retardant Formulation for Cotton Fabrics

    Article • Polymers, April 2020, MDPI AG

    Dr. Mattia Bartoli

  125. Preparation and Characterization of UV-LED Curable Acrylic Films Containing Biochar and/or Multiwalled Carbon Nanotubes: Effect of the Filler Loading on the Rheological, Thermal and Optical Properties

    Article • Polymers, April 2020, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  126. Development of Pressure-Responsive PolyPropylene and Biochar-Based Materials

    Article • Micromachines, March 2020, MDPI AG

    Dr. Mattia Bartoli

  127. Electrical and Microwave Characterization of Thermal Annealed Sewage Sludge Derived Biochar Composites

    Article • Applied Sciences, February 2020, MDPI AG

    Dr. Mattia Bartoli

  128. A Review of Non-Soil Biochar Applications

    Article • Materials, January 2020, MDPI AG

    Dr. Mattia Bartoli

  129. Effect of incorporation of microstructured carbonized cellulose on surface and mechanical properties of epoxy composites

    Article • Journal of Applied Polymer Science, December 2019, Wiley

    Dr. Mattia Bartoli, dr Carlo Rosso

  130. Glycerol Acetylation Mediated by Thermally Hydrolysed Biosolids-Based Material

    Article • Catalysts, December 2019, MDPI AG

    Dr. Mattia Bartoli

  131. Shape tunability of carbonized cellulose nanocrystals

    Article • SN Applied Sciences, November 2019, Springer Science + Business Media

    Dr. Mattia Bartoli

  132. Development of Coffee Biochar Filler for the Production of Electrical Conductive Reinforced Plastic

    Article • Polymers, November 2019, MDPI AG

    Dr. Mattia Bartoli

  133. Influence of pyrolytic thermal history on olive pruning biochar and related epoxy composites mechanical properties

    Article • Journal of Composite Materials, November 2019, SAGE Publications

    Dr. Mattia Bartoli, dr Carlo Rosso

  134. Development of Coffee Biochar Filler for the Production of Electrical Conductive Reinforced Plastic

    Article • October 2019, MDPI AG

    Dr. Mattia Bartoli

  135. An Overview of Temperature Issues in Microwave-Assisted Pyrolysis

    Article • Processes, September 2019, MDPI AG

    Dr. Mattia Bartoli

  136. Structure–Property Relationships in Polyethylene-Based Composites Filled with Biochar Derived from Waste Coffee Grounds

    Article • Polymers, August 2019, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  137. Catalytic Performances of Platinum Containing PLLA Macrocomplex in the Hydrogenation of α,β-Unsaturated Carbonyl Compounds

    Article • Applied Sciences, August 2019, MDPI AG

    Dr. Mattia Bartoli

  138. Influence of Commercial Biochar Fillers on Brittleness/Ductility of Epoxy Resin Composites

    Article • Applied Sciences, August 2019, MDPI AG

    Dr. Mattia Bartoli, dr Carlo Rosso

  139. Carbon Nanostructures for Actuators: An Overview of Recent Developments

    Article • Actuators, June 2019, MDPI AG

    Dr. Mattia Bartoli

  140. Synthesis and Applications of Unsaturated Polyester Composites

    Article • January 2019, Elsevier

    Dr. Mattia Bartoli

  141. Value-Added Products from Urea Glycerolysis Using a Heterogeneous Biosolids-Based Catalyst

    Article • Catalysts, September 2018, MDPI AG

    Dr. Mattia Bartoli

  142. Microwave assisted pyrolysis of crop residues from Vitis vinifera

    Article • Journal of Analytical and Applied Pyrolysis, March 2018, Elsevier

    Dr. Mattia Bartoli

  143. Microwave assisted pyrolysis of halogenated plastics recovered from waste computers

    Article • Waste Management, March 2018, Elsevier

    Dr. Mattia Bartoli

  144. Pyridine and Bipyridine End-Functionalized Polylactide: Synthesis and Catalytic Applications

    Article • July 2017, Wiley

    Dr. Mattia Bartoli

  145. Platinum nanoparticles onto pegylated poly(lactic acid) stereocomplex for highly selective hydrogenation of aromatic nitrocompounds to anilines

    Article • Applied Catalysis A General, May 2017, Elsevier

    Dr. Mattia Bartoli

  146. Palladium nanoparticles supported onto stereocomplexed poly(lactic acid)-poly(ε-caprolactone) copolymers for selective partial hydrogenation of phenylacetylene

    Article • RENDICONTI LINCEI, February 2017, Springer Science + Business Media

    Dr. Mattia Bartoli

  147. Palladium‐Based Catalysts‐Supported onto End‐Functionalized Poly(lactide) for C–C Double and Triple Bond Hydrogenation Reactions

    Article • January 2017, IntechOpen

    Dr. Mattia Bartoli

  148. Production of bio-oils and bio-char from Arundo donax through microwave assisted pyrolysis in a multimode batch reactor

    Article • Journal of Analytical and Applied Pyrolysis, November 2016, Elsevier

    Dr. Mattia Bartoli

  149. Pyrolysis of α-cellulose using a multimode microwave oven

    Article • Journal of Analytical and Applied Pyrolysis, July 2016, Elsevier

    Dr. Mattia Bartoli

  150. Bio-oil from residues of short rotation coppice of poplar using a microwave assisted pyrolysis

    Article • Journal of Analytical and Applied Pyrolysis, May 2016, Elsevier

    Dr. Mattia Bartoli

  151. Protocol: A simple protocol for quantitative analysis of bio-oils through gas-chromatography/mass spectrometry

    Article • European Journal of Mass Spectrometry, January 2016, IM Publications

    Professor Piero Frediani, Dr. Mattia Bartoli

  152. Nitrile hydration to amide in water: Palladium-based nanoparticles vs molecular catalyst

    Article • Journal of Molecular Catalysis A Chemical, December 2015, Elsevier

    Dr. Mattia Bartoli

  153. Synthesis of dianols or BPA through catalytic hydrolyisis/glycolysis of waste polycarbonates using a microwave heating

    Article • Journal of Molecular Catalysis A Chemical, November 2015, Elsevier

    Dr. Mattia Bartoli

  154. Palladium-nanoparticles on end-functionalized poly(lactic acid)-based stereocomplexes for the chemoselective cinnamaldehyde hydrogenation: Effect of the end-group

    Article • Journal of Catalysis, October 2015, Elsevier

    Dr. Mattia Bartoli

  155. An easily recoverable and recyclable homogeneous polyester-based Pd catalytic system for the hydrogenation of α,β-unsaturated carbonyl compounds

    Article • Catalysis Communications, September 2015, Elsevier

    Dr. Mattia Bartoli

  156. Bio-oil from pyrolysis of wood pellets using a microwave multimode oven and different microwave absorbers

    Article • Fuel, August 2015, Elsevier

    Professor Piero Frediani, Dr. Mattia Bartoli

  157. A simple procedure for chromatographic analysis of bio-oils from pyrolysis

    Article • Journal of Analytical and Applied Pyrolysis, July 2015, Elsevier

    Dr. Mattia Bartoli

  158. Depolymerization of polystyrene at reduced pressure through a microwave assisted pyrolysis

    Article • Journal of Analytical and Applied Pyrolysis, May 2015, Elsevier

    Professor Piero Frediani, Dr. Mattia Bartoli

  159. Design and solid phase synthesis of new DOTA conjugated (+)-biotin dimers planned to develop molecular weight-tuned avidin oligomers

    Article • Organic & Biomolecular Chemistry, January 2015, Royal Society of Chemistry

    Dr. Mattia Bartoli

  160. Pd-nanoparticles supported onto functionalized poly(lactic acid)-based stereocomplexes for partial alkyne hydrogenation

    Article • Applied Catalysis A General, January 2014, Elsevier

    Dr. Mattia Bartoli