All Stories

  1. Recyclability of Flame-Retardant Polypropylene: Property and Flame Retardancy Assessment

    Article • Polymers, March 2026, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  2. Liquid Deposition Modeling of Biobased Epoxy Composites: Natural Fillers as Rheology Modifiers and Reinforcements

    Article • ACS Omega, February 2026, American Chemical Society (ACS)

    Dr Rossella Arrigo

  3. Layered Double Hydroxide Nanocomposite Coatings for Improved Flame Retardancy of Polyethylene-Based Copolymers

    Article • Polymers, November 2025, MDPI AG

    Dr Rossella Arrigo

  4. Polypropylene‐Based 3D Printed Skin‐Core Structures With Thermal Conductivity and Balanced Mechanical Properties

    Article • Macromolecular Symposia, November 2025, Wiley

    Dr Rossella Arrigo

  5. From Milk to 3D Printing: A Sustainable Journey of Upcycled Proteins

    Article • November 2025, MDPI AG

    Dr Rossella Arrigo

  6. A Design-Driven Strategy for the Development of Polypropylene Composites Tailored for 3D Printing

    Article • November 2025, MDPI AG

    Dr Rossella Arrigo

  7. Nanostructured Flame-Retardant Coatings Containing Layered Double Hydroxides

    Article • November 2025, MDPI AG

    Dr Rossella Arrigo

  8. The Interplay Between Cross-Contamination, Ageing and Reprocessing in the Mechanical Recycling of HDPE-Based Packaging

    Article • November 2025, MDPI AG

    Dr Rossella Arrigo

  9. Processing-Driven Structuring of Polymer-Based Materials: A Brief Overview

    Article • Polymers, September 2025, MDPI AG

    Dr Rossella Arrigo

  10. Delving into Process–Microstructure–Property Relationships in Cast-Extruded Polylactic Acid/Talc Composite Films: Effect of Different Screw Designs

    Article • Journal of Composites Science, September 2025, MDPI AG

    Dr Rossella Arrigo

  11. Mechanical recycling of HDPE-based packaging: Interplay between cross contamination, aging and reprocessing

    Article • Polymer Degradation and Stability, June 2025, Elsevier

    Dr Rossella Arrigo

  12. Processing/microstructure relationships in melt compounded polyamide 6 with different molecular weights: Effect of screw speed and viscosity ratio

    Article • Polymer Engineering & Science, March 2025, Wiley

    Dr Rossella Arrigo

  13. High Melt Strength Recycled High-Density Polyethylene: Evaluation of a Novel Route for Targeting the Polymer Microstructure

    Article • Polymers, January 2025, MDPI AG

    Dr Rossella Arrigo

  14. An Upcycling Strategy for Polyethylene Terephthalate Fibers: All-Polymer Composites with Enhanced Mechanical Properties

    Article • Journal of Composites Science, December 2024, MDPI AG

    Dr Rossella Arrigo

  15. Towards effective recycling routes for polypropylene: Influence of a repair additive on flow characteristics and processability

    Article • Polymer Degradation and Stability, May 2024, Elsevier

    Dr Rossella Arrigo

  16. The Effect of Processing Conditions on the Microstructure of Homopolymer High-Density Polyethylene Blends: A Multivariate Approach

    Article • Polymers, March 2024, MDPI AG

    Dr Rossella Arrigo

  17. Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing

    Article • Polymers, March 2024, MDPI AG

    Dr Rossella Arrigo

  18. Evolution of the Microstructure of PP-LDHs Nanocomposites during Melt Compounding: A Simulation Approach

    Article • Polymers, December 2023, MDPI AG

    Dr Rossella Arrigo

  19. On a Biobased Epoxy Vitrimer from a Cardanol Derivative Prepared by a Simple Thiol–Epoxy “Click” Reaction

    Article • ACS Omega, December 2023, American Chemical Society (ACS)

    Dr Rossella Arrigo

  20. Optimizing the Rheological and Thermal Behavior of Polypropylene-Based Composites for Material Extrusion Additive Manufacturing Processes

    Article • Polymers, May 2023, MDPI AG

    Dr Rossella Arrigo

  21. Preparation and characterization of a fully biobased resin system for 3d-printing, suitable for replacing fossil-based acrylates

    Article • Journal of Polymer Research, March 2023, Springer Science + Business Media

    Dr Rossella Arrigo

  22. Upcycling of PET from recycled food packaging trays via vitrimers chemistry

    Article • Polymer, January 2023, Elsevier

    Dr Rossella Arrigo

  23. Recycled PP for 3D Printing: Material and Processing Optimization through Design of Experiment

    Article • Applied Sciences, October 2022, MDPI AG

    Dr Rossella Arrigo

  24. Flexible Perfluoropolyethers-Functionalized CNTs-Based UHMWPE Composites: A Study on Hydrogen Evolution, Conductivity and Thermal Stability

    Article • Materials, October 2022, MDPI AG

    Dr Rossella Arrigo

  25. Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses

    Article • Polymers, August 2022, MDPI AG

    Dr Rossella Arrigo

  26. Flame retardant potential of Tetra Pak®-derived biochar for ethylene-vinyl-acetate copolymers

    Article • Composites Part C Open Access, July 2022, Elsevier

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  27. Electrical measurements of ultra high molecular weight polyethylene composites as indicators of the manufacturing process reproducibility

    Article • June 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Rossella Arrigo

  28. Recent Advances in Biochar Polymer Composites

    Article • Polymers, June 2022, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  29. Thermoreversible Cross-Linked Rubber Prepared via Melt Blending and Its Nanocomposites

    Article • ACS Applied Polymer Materials, June 2022, American Chemical Society (ACS)

    Dr Rossella Arrigo

  30. Preparation and Characterization of 3D-Printed Biobased Composites Containing Micro- or Nanocrystalline Cellulose

    Article • Polymers, May 2022, MDPI AG

    Dr Rossella Arrigo

  31. FDM Printability of PLA Based-Materials: The Key Role of the Rheological Behavior

    Article • Polymers, April 2022, MDPI AG

    Dr Rossella Arrigo

  32. Influence of different dry‐mixing techniques on the mechanical, thermal, and electrical behavior of ultra‐high molecular weight polyethylene/exhausted tire carbon composites

    Article • Polymers for Advanced Technologies, February 2022, Wiley

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  33. Effect of the Elongational Flow on the Morphology and Properties of Polymer Systems: A Brief Review

    Article • Polymers, October 2021, MDPI AG

    Prof Francesco Paolo La Mantia, Dr Rossella Arrigo

  34. Rheological, mechanical, thermal and electrical properties of UHMWPE/CNC composites

    Article • Cellulose, October 2021, Springer Science + Business Media

    Dr Rossella Arrigo

  35. High Frequency Electromagnetic Shielding by Biochar-Based Composites

    Article • Nanomaterials, September 2021, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  36. Thermal, dynamic-mechanical and electrical properties of UV-LED curable coatings containing porcupine-like carbon structures

    Article • Materials Today Communications, September 2021, Elsevier

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  37. Photosensitive acrylates containing bio‐based epoxy‐acrylate soybean oil for 3D printing application

    Article • Journal of Applied Polymer Science, June 2021, Wiley

    Dr Rossella Arrigo

  38. Rheology, Morphology and Thermal Properties of a PLA/PHB/Clay Blend Nanocomposite: The Influence of Process Parameters

    Article • Journal of Polymers and the Environment, May 2021, Springer Science + Business Media

    Dr Rossella Arrigo

  39. Bionanocomposite Blown Films: Insights on the Rheological and Mechanical Behavior

    Article • Polymers, April 2021, MDPI AG

    Prof Francesco Paolo La Mantia, Dr Rossella Arrigo

  40. Designing 3D printable polypropylene: Material and process optimisation through rheology

    Article • Additive Manufacturing, April 2021, Elsevier

    Dr Rossella Arrigo

  41. Structure–Property Relationships in Bionanocomposites for Pipe Extrusion Applications

    Article • Polymers, March 2021, MDPI AG

    Prof Francesco Paolo La Mantia, Dr Rossella Arrigo

  42. Rheological behavior and morphology of poly(lactic acid)/low‐density polyethylene blends based on virgin and recycled polymers: Compatibilization with natural surfactants

    Article • Journal of Applied Polymer Science, February 2021, Wiley

    Dr Rossella Arrigo

  43. Effect of SiO2 Particles on the Relaxation Dynamics of Epoxidized Natural Rubber (ENR) in the Melt State by Time-Resolved Mechanical Spectroscopy

    Article • Polymers, January 2021, MDPI AG

    Dr Rossella Arrigo

  44. Properties of Graphene-Related Materials Controlling the Thermal Conductivity of Their Polymer Nanocomposites

    Article • Nanomaterials, October 2020, MDPI AG

    Dr Rossella Arrigo

  45. Mechanical Performance of Polylactic Acid from Sustainable Screw-Based 3D Printing

    Article • September 2020, Springer Science + Business Media

    Dr Rossella Arrigo

  46. Rheological Behavior of Polymer/Carbon Nanotube Composites: An Overview

    Article • Materials, June 2020, MDPI AG

    Dr Rossella Arrigo

  47. Poly(lactic Acid)–Biochar Biocomposites: Effect of Processing and Filler Content on Rheological, Thermal, and Mechanical Properties

    Article • Polymers, April 2020, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  48. Preparation and Characterization of UV-LED Curable Acrylic Films Containing Biochar and/or Multiwalled Carbon Nanotubes: Effect of the Filler Loading on the Rheological, Thermal and Optical Properties

    Article • Polymers, April 2020, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  49. Thermal stability and flame retardance of EVA containing DNA-modified clays

    Article • Thermochimica Acta, April 2020, Elsevier

    Dr Rossella Arrigo

  50. Structure Evolution of Epoxidized Natural Rubber (ENR) in the Melt State by Time-Resolved Mechanical Spectroscopy

    Article • Materials, February 2020, MDPI AG

    Dr Rossella Arrigo

  51. PLA/PHB Blends: Biocompatibilizer Effects

    Article • Polymers, August 2019, MDPI AG

    Dr Rossella Arrigo

  52. Structure–Property Relationships in Polyethylene-Based Composites Filled with Biochar Derived from Waste Coffee Grounds

    Article • Polymers, August 2019, MDPI AG

    Dr Rossella Arrigo, Dr. Mattia Bartoli

  53. Relaxation Dynamics in Polyethylene Glycol/Modified Hydrotalcite Nanocomposites

    Article • Polymers, October 2018, MDPI AG

    Dr Rossella Arrigo

  54. Effects of the nanofiller size and aspect ratio on the thermal and rheological behavior of PEG nanocomposites containing boehmites or hydrotalcites

    Article • Journal of Thermal Analysis and Calorimetry, July 2018, Springer Science + Business Media

    Dr Rossella Arrigo

  55. An insight into the interaction between functionalized thermoplastic elastomer and layered double hydroxides through rheological investigations

    Article • Composites Part B Engineering, April 2018, Elsevier

    Dr Rossella Arrigo, Delia Chillura Martino

  56. Sonication-Induced Modification of Carbon Nanotubes: Effect on the Rheological and Thermo-Oxidative Behaviour of Polymer-Based Nanocomposites

    Article • Materials, March 2018, MDPI AG

    Dr Rossella Arrigo

  57. Thermal and rheological behavior of PEG-based nanocomposites: Effect of filler aspect ratio and size

    Article • January 2018, American Institute of Physics

    Dr Rossella Arrigo

  58. Supramolecular Hydro- and Ionogels: A Study of Their Properties and Antibacterial Activity

    Article • Chemistry - A European Journal, October 2017, Wiley

    Dr Rossella Arrigo

  59. Carbon nanotubes-based nanohybrids for multifunctional nanocomposites

    Article • Journal of King Saud University - Science, September 2017, Elsevier

    Dr Rossella Arrigo

  60. Concentration-dependent anti-/pro-oxidant activity of natural phenolic compounds in bio-polyesters

    Article • Polymer Degradation and Stability, August 2017, Elsevier

    Dr Rossella Arrigo

  61. Polymeric micelles as a new generation of anti-oxidant carriers

    Article • Polimery, July 2017, Industrial Chemistry Research Institute

    Dr Rossella Arrigo, Giuseppe Lazzara

  62. Rheological Percolation Threshold in High-Viscosity Polymer/CNTs Nanocomposites

    Article • Journal of Engineering Mechanics, May 2017, American Society of Civil Engineers (ASCE)

    Dr Rossella Arrigo

  63. Mechanical and rheological properties of polystyrene-block-polybutadiene-block-polystyrene copolymer reinforced with carbon nanotubes: effect of processing conditions

    Article • Journal of Polymer Engineering, April 2017, De Gruyter

    Dr Rossella Arrigo

  64. Novel strategic approach for the thermo- and photo- oxidative stabilization of polyolefin/clay nanocomposites

    Article • Polymer Degradation and Stability, April 2017, Elsevier

    Dr Rossella Arrigo

  65. Silanol-POSS as dispersing agents for carbon nanotubes in polyamide

    Article • Polymer Engineering & Science, March 2017, Wiley

    Dr Rossella Arrigo

  66. Thermo-oxidative stabilization of poly(lactic acid)-based nanocomposites through the incorporation of clay with in-built antioxidant activity

    Article • Journal of Applied Polymer Science, February 2017, Wiley

    Dr Rossella Arrigo

  67. Hybrid supramolecular gels of Fmoc-F/halloysite nanotubes: systems for sustained release of camptothecin

    Article • Journal of Materials Chemistry B, January 2017, Royal Society of Chemistry

    Dr Rossella Arrigo, Filippo Parisi

  68. Low-Density Polyethylene/Polyamide/Clay Blend Nanocomposites: Effect of Morphology of Clay on Their Photooxidation Resistance

    Article • Journal of Nanomaterials, January 2017, Hindawi Publishing Corporation

    Dr Rossella Arrigo, Mr Giovanni Filippone, Prof Francesco Paolo La Mantia

  69. Pluronic nanoparticles as anti-oxidant carriers for polymers

    Article • Polymer Degradation and Stability, December 2016, Elsevier

    Dr Rossella Arrigo, Giuseppe Lazzara

  70. Nano-hybrids based on quercetin and carbon nanotubes with excellent anti-oxidant activity

    Article • Materials Letters, October 2016, Elsevier

    Dr Rossella Arrigo

  71. Tunable radical scavenging activity of carbon nanotubes through sonication

    Article • Carbon, October 2016, Elsevier

    Dr Rossella Arrigo, Salvatore Marullo

  72. Polyamide-Based Fibers Containing Microwave-Exfoliated Graphite Nanoplatelets

    Article • Advances in Polymer Technology, June 2016, Wiley

    Dr Rossella Arrigo, Delia Chillura Martino

  73. High performance composites containing perfluoropolyethers-functionalized carbon-based nanoparticles: Rheological behavior and wettability

    Article • Composites Part B Engineering, June 2016, Elsevier

    Dr Rossella Arrigo

  74. Advanced nano-hybrids for thermo-oxidative-resistant nanocomposites

    Article • Journal of Materials Science, April 2016, Springer Science + Business Media

    Dr Rossella Arrigo

  75. Double bond-functionalized POSS: dispersion and crosslinking in polyethylene-based hybrid obtained by reactive processing

    Article • Polymer Bulletin, April 2016, Springer Science + Business Media

    Dr Rossella Arrigo

  76. POSS Grafting on Polyethylene and Maleic Anhydride-Grafted Polyethylene by One-Step Reactive Melt Mixing

    Article • Advances in Polymer Technology, February 2016, Wiley

    Dr Rossella Arrigo

  77. Multi-functional polyhedral oligomeric silsesquioxane-functionalized carbon nanotubes for photo-oxidative stable Ultra-High Molecular Weight Polyethylene-based nanocomposites

    Article • European Polymer Journal, February 2016, Elsevier

    Dr Rossella Arrigo

  78. Improved carbon nanotubes dispersion through polar dispersant agents in polyamide

    Article • January 2016, American Institute of Physics

    Dr Rossella Arrigo

  79. Effect of Nanodiamonds on Structure and Durability of Polyethylene Oxide-Based Nanocomposites

    Article • Journal of Nanomaterials, January 2016, Hindawi Publishing Corporation

    Dr Rossella Arrigo

  80. Biopolyester-based systems containing naturally occurring compounds with enhanced thermo-oxidative stability

    Article • Journal of Applied Biomaterials & Functional Materials, January 2016, SAGE Publications

    Dr Rossella Arrigo

  81. Multi-functional hindered amine light stabilizers-functionalized carbon nanotubes for advanced ultra-high molecular weight Polyethylene-based nanocomposites

    Article • Composites Part B Engineering, December 2015, Elsevier

    Dr Rossella Arrigo

  82. High-performance thermoplastic elastomers/carbon nanotubes nanocomposites: Mechanical behavior, rheology, and durability

    Article • Polymer Composites, November 2015, Wiley

    Dr Rossella Arrigo

  83. Improvement of the photo-stability of polystyrene-block-polybutadiene-block-polystyrene through carbon nanotubes

    Article • Polymer Degradation and Stability, August 2015, Elsevier

    Dr Rossella Arrigo

  84. Advanced ultra-high molecular weight polyethylene/antioxidant-functionalized carbon nanotubes nanocomposites with improved thermo-oxidative resistance

    Article • Journal of Applied Polymer Science, May 2015, Wiley

    Dr Rossella Arrigo

  85. Thermo-oxidative resistant nanocomposites containing novel hybrid-nanoparticles based on natural polyphenol and carbon nanotubes

    Article • Polymer Degradation and Stability, May 2015, Elsevier

    Dr Rossella Arrigo

  86. Polyamide/carbonaceous particles nanocomposites fibers: Morphology and performances

    Article • Polymer Composites, March 2015, Wiley

    Dr Rossella Arrigo

  87. On the role of multi-functional polyhedral oligomeric silsesquioxane in polystyrene-zinc oxide nanocomposites

    Article • Journal of Polymer Engineering, January 2015, De Gruyter

    Dr Rossella Arrigo

  88. α-Tocopherol-induced radical scavenging activity in carbon nanotubes for thermo-oxidation resistant ultra-high molecular weight polyethylene-based nanocomposites

    Article • Carbon, August 2014, Elsevier

    Dr Rossella Arrigo

  89. Effect of the orientation and rheological behaviour of biodegradable polymer nanocomposites

    Article • European Polymer Journal, May 2014, Elsevier

    Dr Rossella Arrigo, Prof Francesco Paolo La Mantia

  90. Immobilization of natural anti-oxidants on carbon nanotubes and aging behavior of ultra-high molecular weight polyethylene-based nanocomposites

    Article • January 2014, American Institute of Physics

    Dr Rossella Arrigo

  91. Natural compounds as light stabilizer for a starch-based biodegradable polymer

    Article • Journal of Polymer Engineering, January 2014, De Gruyter

    Dr Rossella Arrigo, Prof Francesco Paolo La Mantia

  92. Performances and morphology of polyamide/carbonaceous structures based fibers

    Article • January 2014, American Institute of Physics

    Dr Rossella Arrigo, Prof Francesco Paolo La Mantia

  93. Quercetin as natural stabilizing agent for bio-polymer

    Article • January 2014, American Institute of Physics

    Dr Rossella Arrigo

  94. Interaction in POSS-poly(ethylene-co-acrylic acid) nanocomposites

    Article • Polymer Journal, October 2013, Nature

    Dr Rossella Arrigo, Prof Francesco Paolo La Mantia

  95. Effect of the nanotube aspect ratio and surface functionalization on the morphology and properties of multiwalled carbon nanotube polyamide-based fibers

    Article • Journal of Applied Polymer Science, January 2013, Wiley

    Dr Rossella Arrigo, Prof Francesco Paolo La Mantia

  96. UV-stabilisation of polystyrene-based nanocomposites provided by polyhedral oligomeric silsesquioxanes (POSS)

    Article • Polymer Degradation and Stability, November 2012, Elsevier

    Dr Rossella Arrigo, Prof Francesco Paolo La Mantia

  97. Structure-properties relationships of polyhedral oligomeric silsesquioxane (POSS) filled PS nanocomposites

    Article • eXPRESS Polymer Letters, May 2012, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Dr Rossella Arrigo, Prof Francesco Paolo La Mantia

  98. Influence of the e-beam irradiation and photo-oxidation aging on the structure and properties of LDPE-OMMT nanocomposite films

    Article • Radiation Physics and Chemistry, April 2012, Elsevier

    Dr Rossella Arrigo

  99. Reactive melt blending of functionalized-MW/CNTs with polyolefin

    Article • January 2012, American Institute of Physics

    Dr Rossella Arrigo, Prof Francesco Paolo La Mantia

  100. On the Role of Extensional Flow in Morphology and Property Modifications of MWCNT/Polyamide-Based Fibers

    Article • Macromolecular Materials and Engineering, March 2011, Wiley

    Dr Rossella Arrigo, Prof Francesco Paolo La Mantia

  101. Effect of elongational flow on morphology and properties of polymer/CNTs nanocomposite fibers

    Article • Polymers for Advanced Technologies, January 2010, Wiley

    Dr Rossella Arrigo, Prof Francesco Paolo La Mantia, Dr Roberto Matassa