All Stories

  1. Influence of hot water blanching and saline immersion period on the thermal effusivity and the drying kinetics of hybrid solar drying of sweet potato chips
  2. Numerical Study of the Pyrolysis of Wood Chips for Biocharcoal Production: Influence of Chips Geometry and Initial Moisture Content
  3. Parametric studies of heat and mass transfer process for two-stage biochar production from poultry litter pellet biomass
  4. Energy, environmental and economic analyses of an indirect cocoa bean solar dryer: A comparison between natural and forced convections
  5. Optimization of the energy consumption, drying kinetics and evolution of thermo-physical properties of drying of forage grass for haymaking
  6. Novel low-cost pre-treatment material for enhancing the methane yield during anaerobic digestion of lignocellulosic biomass feedstocks: Experimental and kinetic study
  7. Modeling and simulation of drying kinetics/curves: application to building materials
  8. Modelling and simulation of multi-coupled heat and mass transfer processes: A case study of solar biomass dryer
  9. Review of solar-biomass pyrolysis systems: Focus on the configuration of thermal-solar systems and reactor orientation
  10. Correction to: 3D Simulation of Transient Thermal Response of Mucuna Seed subjected to Laser Heating: A Parametric Study Approach
  11. Physics‐based numerical simulation of heat and moisture transport in red chili subjected to mix‐mode solar drying with phase change energy storage
  12. 3D Simulation of Transient Thermal Response of Mucuna Seed subjected to Laser Heating: A Parametric Study Approach
  13. Influence of drying applications on wood, brick and concrete used as building materials: a review
  14. Study on the effect of conical and parabolic solar concentrator designs on hybrid solar dryers for apricots under variable conditions: A numerical simulation approach
  15. Energy in buildings: A review of models on hygrothermal transfer through the porous materials for building envelop
  16. Numerical Study of the Drying of Cassava Roots Chips Using an Indirect Solar Dryer in Natural Convection
  17. The Effectiveness of Different Household Storage Strategies and Plant-Based Preservatives for Dehulled and Sun-Dried Breadfruit Seeds
  18. Reviewing the Exergy Analysis of Solar Thermal Systems Integrated with Phase Change Materials
  19. Development and Optimization of a Manual Fed Cassava Root Chipper for Household Cassava Processors
  20. Nigeria’s Energy deficit: The challenges and Eco- friendly approach in reducing the energy gap
  21. Environmental Sustainability Analysis of a Hybrid Heat Source Dryer
  22. Thermodynamic and economic analysis of a Kalina system with integrated lithium-bromide-absorption cycle for power and cooling production
  23. Experimental Modelling of a Solar Dryer for Wood Fuel in Epinal (France)
  24. Prospects of Pyrolysis Process and Models in Bioenergy Generation: a Comprehensive Review
  25. Solar drying research of medicinal and aromatic plants: An African experience with assessment of the economic and environmental impact.
  26. Development of a low-cost wind-powered active solar dryer integrated with glycerol as thermal storage
  27. African oil bean seed as feedstock for bio-oil and biodiesel production and on the effects of thermal pre-treatments on the quality of the bio-oil
  28. Simulation of Storage Conditions of Mixed Biomass Pellets for Bioenergy Generation: Study of the Thermodynamic Properties
  29. Numerical analysis and validation of a natural convection mix-mode solar dryer for drying red chilli under variable conditions
  30. Exergetic sustainability and economic analysis of hybrid solar-biomass dryer integrated with copper tubing as heat exchanger
  31. Nanomaterials application in greenhouse structures, crop processing machinery, packaging materials and agro-biomass conversion
  32. Response surface optimization of Bambara nut kernel yield as affected by speed of rotation, and impeller configurations
  33. Modelling and numerical simulation of hygrothermal transfer through a building wall for locations subjected to outdoor conditions in Sub-Saharan Africa
  34. Assessment of cation chemistry of groundwater near hospital wastes dumpsites in Umuahia Nigeria using multivariate and analytical index approach
  35. Influence of Moisture Content and Compression Axis on Mechanical, Physical, and Phytochemicals Properties of Akuamma (Picralima nitida) Fruits and Seeds
  36. A Modelling approach for determining the throughput capacity and energy consumption of a cassava tuber shredder
  37. Optimum exergetic performance parameters and thermo-sustainability indicators of low-temperature modified organic Rankine cycles (ORCs)
  38. Exergy analysis of a novel low-heat recovery organic Rankine cycle (ORC) for combined cooling and power generation
  39. A comparative performance analysis and thermo-sustainability indicators of modified low-heat organic Rankine cycles (ORCs): An exergy-based procedure
  40. Experience of Solar Drying in Africa: Presentation of Designs, Operations, and Models
  41. Evolution of thermo-physical properties of Akuama (picralima nitida) seed and antioxidants retention capacity during hot air drying
  42. In-Situ Evolution of Heat and Mass Transfer Phenomena and Evaporative Water Losses of Three Agro-Waste Evaporative Cooling Pads: An Experimental and Modeling Study
  43. Packaging and Cold Storage of Fresh Products
  44. Energy and exergy analysis of a solar dryer integrated with sodium sulfate decahydrate and sodium chloride as thermal storage medium
  45. Potential of integrating Na2SO4 · 10H2O pellets in solar drying system
  46. Pre-harvest and Post-harvest Factors Affecting Bioactive Compounds From Vernonia amygdalina (Del.)
  47. Heat and mass transfer parameters in the drying of cocoyam slice
  48. Corrigendum
  49. Kinetics of change in colour and some bio-chemical composition during fermentation of cocoa bean
  50. Physical properties of the African walnut (Tetracarpidium conophorum) from Nigeria
  51. Exergetic performance indicators of a direct evaporative cooling system with different evaporative cooling pads
  52. Impact of evaporative cooling preservation on the shelf life of fruits and vegetable in South Western Nigeria
  53. A mathematical model for predicting the cracking efficiency of vertical-shaft centrifugal palm nut cracker
  54. Cocoa Bean (Theobroma cacao L.)Drying Kinetics
  55. Functional performance of a vertical-shaft centrifugal palm nut cracker