All Stories

  1. Microstructure and atomic order analyses in CoFeCrAl Heusler alloy thin films: Interpretation of spin gapless semiconductor-like transport properties
  2. Peculiar behavior of V on the Curie temperature and anisotropy field of SmFe12-xVx compounds
  3. Perpendicular magnetic anisotropy and its voltage control in MgO/CoFeB/Mo/CoFeB/MgO junctions
  4. Optimization of direct extrusion process for Nd-Fe-B magnets using active learning assisted by machine learning and Bayesian optimization
  5. Foreword to the Focus Issue: science and technology of element-strategic permanent magnets
  6. Analysis of current-in-plane giant magnetoresistance using Co2FeAl0.5Si0.5 half-metallic Heusler alloy
  7. Significant coercivity enhancement of hot-deformed bulk magnets by two-step diffusion process using a minimal amount of Dy
  8. Corrosion-resistant Cu-Fe-based immiscible medium-entropy alloy with tri-layer passivation
  9. Nanometre-thick Si/Al Gradient Materials for Sustainable Spin Current Generation
  10. Reduction of hysteresis in (La1-Ce ) (Mn Fe11.4-)Si1.6 magnetocaloric compounds for cryogenic magnetic refrigeration
  11. Systematic investigation of the effect of layer thickness on the linear sensing characteristics of asymmetric structured CoFe/Rh/CoFe/Cu/CoFe fully epitaxial CIP-GMR based magnetic sensors
  12. Spin-scattering asymmetry at half-metallic-ferromagnet|ferromagnet interface
  13. First-principles disordered local-moment study on temperature dependence of spin polarization in Co2Fe(Ga0.5Ge0.5) Heusler alloy
  14. Origin of coercivity in an anisotropic Sm(Fe,Ti,V)12-based sintered magnet
  15. Role of V on the coercivity of SmFe12-based melt-spun ribbons revealed by machine learning and microstructure characterizations
  16. Phase relations and extrinsic magnetic properties of Sm–(Fe,Co)–Ti–(Ga)-based alloys for ThMn12-type permanent magnets
  17. Most frequently asked questions about the coercivity of Nd-Fe-B permanent magnets
  18. Magnetic properties and microstructure of Sm5Fe17-based composite magnets
  19. Large linear sensitivity of asymmetric structured giant magnetoresistive device with metastable bcc-Cu spacer and auxiliary biquadratic coupling through Rh spacer
  20. Elucidation of the strong effect of an interfacial monolayer on magnetoresistance in giant magnetoresistive devices with current perpendicular to the plane
  21. Heating rate dependence of coercivity and microstructure of Fe–B–P–Cu nanocrystalline soft magnetic materials
  22. Intrinsic hard magnetic properties of Sm(Fe,Co)12−xTix compound with ThMn12 structure
  23. SmFe12-based hard magnetic alloys prepared by reduction-diffusion process
  24. Toward Development of Strong and Formable Magnesium Alloy Sheets with Bake-Hardenability
  25. Impact of oxygen on band structure at the Ni/GaN interface revealed by hard X-ray photoelectron spectroscopy
  26. Positive linear magnetoresistance effect in disordered L21B -type
  27. Prospects for the development of SmFe12-based permanent magnets with a ThMn12-type phase
  28. (Pr0.75Ce0.25)-Fe-B hot-deformed magnets for cryogenic applications
  29. Quantitative analysis of sulfur segregation at the oxide/substrate interface in Ni-base single crystal superalloy
  30. Intrinsic magnetic properties of (Sm,Gd)Fe12-based compounds with minimized addition of Ti
  31. Relationship between the microstructure, local magnetism and coercivity in Ga-containing Nd-Fe-B sintered magnets
  32. Room-temperature stretch formability, tensile properties, and microstructures of precipitation hardenable Mg–6Zn-0.2Ca (mass%) alloy sheets micro-alloyed with Ce or Y
  33. Exceeding 400% tunnel magnetoresistance at room temperature in epitaxial Fe/MgO/Fe(001) spin-valve-type magnetic tunnel junctions
  34. Improved coercivity and squareness in bulk hot-deformed Nd–Fe–B magnets by two-step eutectic grain boundary diffusion process
  35. X-ray diffraction and in situ pressurization of dentine apatite reveals nanocrystal modulus stiffening upon carbonate removal
  36. Determination of the Chemical Compositions of Fine titanium Carbide and Niobium Carbide Precipitates in Isothermally Aged Ferritic Steel by Atom Probe Tomography Analysis
  37. Direct detection and stochastic analysis on thermally activated domain-wall depinning events in micropatterned Nd-Fe-B hot-deformed magnets
  38. Effects of the atomic order on the half-metallic electronic structure in the Co2<...
  39. Fully epitaxial giant magnetoresistive devices with half-metallic Heusler alloy fabricated on poly-crystalline electrode using three-dimensional integration technology
  40. Fabrication of a novel magnetic topological heterostructure and temperature evolution of its massive Dirac cone
  41. Effect of recovery and recrystallization on microstructure and magnetic properties of Fe-0.4P rolled sheets
  42. Achievement of high coercivity in Sm(Fe0.8Co0.2)12 anisotropic magnetic thin film by boron doping
  43. Anisotropy-induced spin reorientation in chemically modulated amorphous ferrimagnetic films
  44. Tuning transition temperature of magnetocaloric Mn1.8Fe0.2(P0.59Si0.41) alloys for cryogenic magnetic refrigeration
  45. Thermally-stable high coercivity Ce-substituted hot-deformed magnets with 20% Nd reduction
  46. Angular dependence and thermal stability of coercivity of Nd-rich Ga-doped Nd–Fe–B sintered magnet
  47. Control of grain density in FePt-C granular thin films during initial growth
  48. Formation mechanism of Tb-rich shell in grain boundary diffusion processed Nd–Fe–B sintered magnets
  49. Magnetic flux density measurements from grain boundary phase in 0.1 at% Ga-doped Nd–Fe–B sintered magnet
  50. The spin Hall effect of Bi-Sb alloys driven by thermally excited Dirac-like electrons
  51. Characterizations of GaN nanowires and GaInN/GaN multi-quantum shells grown by MOVPE
  52. Relationship between the thermal stability of coercivity and the aspect ratio of grains in Nd-Fe-B magnets: Experimental and numerical approaches
  53. Thermal decomposition of ThMn12-type phase and its optimum stabilizing elements in SmFe12-based alloys
  54. An alternative approach to the measurement of anisotropy field – Single grain extraction
  55. Effects of Zn Additions on the Room Temperature Formability and Strength in Mg–1.2Al–0.5Ca–0.4Mn Alloy Sheets
  56. Atomic-scale quantitative analysis of implanted Mg in annealed GaN layers on free-standing GaN substrates
  57. Detection of elemental magnetization reversal events in a micro-patterned Nd-Fe-B hot-deformed magnet
  58. Observation of anomalous Ettingshausen effect and large transverse thermoelectric conductivity in permanent magnets
  59. Comparative study of spin-dependent transport in Co2FeAl/MgAl2O4/CoFe magnetic tunnel junctions with and without thin CoFe interface insertion: an elastic and inelastic scattering model analysis
  60. Improved current-perpendicular-to-plane giant magnetoresistance outputs by heterogeneous Ag-In:Mn-Zn-O nanocomposite spacer layer prepared from Ag-In-Zn-O precursor
  61. Band match enhanced current-in-plane giant magnetoresistance in epitaxial Co50Fe50/Cu multilayers with metastable bcc-Cu spacer
  62. Anisotropic, single-crystalline SmFe12-based microparticles with high roundness fabricated by jet-milling
  63. Influence of Ti addition on microstructure and magnetic properties of a heavy-rare-earth-free Nd-Fe-B sintered magnet
  64. The effect of Zr substitution on saturation magnetization in (Sm1-xZrx)(Fe0.8Co0.2)12 compound with the ThMn12 structure
  65. Magnetic in-plane components of FePt nanogranular film on polycrystalline MgO underlayer for heat-assisted magnetic recording media
  66. Development of high coercivity anisotropic Nd-Fe-B/Fe nanocomposite powder using hydrogenation disproportionation desorption recombination process
  67. Role of Co on the magnetic properties of Ce-substituted Nd-Fe-B hot-deformed magnets
  68. Towards Oxide Electronics: a Roadmap
  69. Coercivity enhancement of selective laser sintered NdFeB magnets by grain boundary infiltration
  70. Determining the strength of GP zones in Mg alloy AXM10304, both parallel and perpendicular to the zone
  71. Microstructure and coercivity of grain boundary diffusion processed Dy-free and Dy-containing Nd Fe B sintered magnets
  72. Role of Ga on the high coercivity of Nd-rich Ga-doped Nd-Fe-B sintered magnet
  73. Inducing out-of-plane precession of magnetization for microwave-assisted magnetic recording with an oscillating polarizer in a spin-torque oscillator
  74. Over 100% magnetoresistance ratio at room temperature in magnetic tunnel junctions with CuGaSe2 spacer layer
  75. Emergence of coercivity in Sm(Fe0.8Co0.2)12 thin films via eutectic alloy grain boundary infiltration
  76. Design of spin-injection-layer in all-in-plane spin-torque-oscillator for microwave assisted magnetic recording
  77. Impact of carbon segregant on microstructure and magnetic properties of FePt-C nanogranular films on MgO (001) substrate
  78. Interface resonance in Fe/Pt/MgO multilayer structure with large voltage controlled magnetic anisotropy change
  79. Development of ultra-fine grain sized SmFe12-based powders using hydrogenation disproportionation desorption recombination process
  80. Comparison of coercivity and squareness in hot-deformed and sintered magnets produced from a Nd-Fe-B-Cu-Ga alloy
  81. High melting point metal (Pt, W) seed layer for grain size refinement of FePt-based heat-assisted magnetic recording media
  82. Magnetization reversal process of anisotropic hot-deformed magnets observed by magneto-optical Kerr effect microscopy
  83. First-order reversal curve analysis of a Nd-Fe-B sintered magnet with soft X-ray magnetic circular dichroism microscopy
  84. The microstructural origin of the enhanced current-perpendicular-to-the-plane giant magnetoresistance by Ag/In-Zn-O/Zn spacer layer
  85. Investigation of Gilbert damping of a tetragonally distorted ultrathin Fe0.5Co0.5 epitaxial film with high magnetic anisotropy
  86. Coercivity and its thermal stability of Nd Fe B hot-deformed magnets enhanced by the eutectic grain boundary diffusion process
  87. Impact of boron diffusion at MgO grain boundaries on magneto-transport properties of MgO/CoFeB/W magnetic tunnel junctions
  88. Impact of Intergrain Spin-Transfer Torques Due to Huge Thermal Gradients in Heat-Assisted Magnetic Recording
  89. Microstructure and magnetic properties of FePt-(C,SiO2) granular films deposited on MgO, MgTiO, and MgTiON underlayers
  90. Time domain magnetization dynamics study to estimate interlayer exchange coupling constant in Nd-Fe-B/Ni80Fe20 films
  91. Near- Tc Ferromagnetic Resonance and Damping in FePt -Based Heat-Assisted Magnetic Recording Media
  92. Micromagnetic Studies of Laser-Induced Magnetization Dynamics in FePt–C Films
  93. High magnetic field sensitivity in anti-ferromagnetically coupled 001-epitaxial [Co2Fe(Al0.5Si0.5)/Ag]N multilayers
  94. Bake-hardenable Mg–Al–Zn–Mn–Ca sheet alloy processed by twin-roll casting
  95. The effect of Co addition on magnetic and structural properties of nanocrystalline (Fe,Co)-Si-B-P-Cu alloys
  96. Microstructure of a Dy-free Nd-Fe-B sintered magnet with 2 T coercivity
  97. Launching Materialia
  98. Launching Materialia
  99. Reprint of Prospect for HRE-free high coercivity Nd-Fe-B permanent magnets
  100. Searching the weakest link: Demagnetizing fields and magnetization reversal in permanent magnets
  101. Launching Materialia
  102. Temperature dependence of the crystal structures and phase fractions of secondary phases in a Nd-Fe-B sintered magnet
  103. Voltage-Controlled Magnetic Anisotropy in Fe1−xCox/Pd/MgO system
  104. Effects of rolling conditions on the microstructure and mechanical properties in a Mg–Al–Ca–Mn–Zn alloy sheet
  105. Enhanced current-perpendicular-to-plane giant magnetoresistance by improvement of atomic order of Co2FeSi Heusler alloy film through Ag doping
  106. Intrinsic magnetic properties of Sm(Fe1-Co )11Ti and Zr-substituted Sm1-yZr (Fe0.8Co0.2)11.5Ti0.5 compounds with ThMn12 structure toward the development of permanent magnets
  107. Launching Materialia
  108. Magnetization measurements for grain boundary phases in Ga-doped Nd-Fe-B sintered magnet
  109. Prospect for HRE-free high coercivity Nd-Fe-B permanent magnets
  110. Analysis of magnetotransport properties and microstructure in current-perpendicular-to-plane pseudo spin-valves using Co2Fe(Ga0.5Ge0.5) Heusler alloy and Ag/Mg-Ti-O/Ag-based spacer
  111. Investigation of nanoscale voids in Sb-doped p-type ZnO nanowires
  112. Origin of the coercivity difference in Nd-Fe-B sintered magnets processed from hydrogenation-disproportionation-desorption- recombination powder and jet-milled powder
  113. Coercivity enhancement of Nd-Fe-B hot-deformed magnets by the eutectic grain boundary diffusion process using Nd-Ga-Cu and Nd-Fe-Ga-Cu alloys
  114. Materials for spin-transfer-torque magnetoresistive random-access memory
  115. Impact of intergrain spin transfer torques due to huge thermal gradients on the performance of heat assisted magnetic recording
  116. Microstructural origin of hysteresis in Ni-Mn-In based magnetocaloric compounds
  117. Microstructure and magnetic properties of anisotropic polycrystalline Sm(Fe0.8Co0.2)12 thin films with ThMn12 structure.
  118. Suppression of non-oriented grains in Nd-Fe-B hot-deformed magnets by Nb doping
  119. Erratum to “Static recrystallization behaviour of cold rolled Mg-Zn-Y alloy and role of solute segregation in microstructure evolution” [Scr. Mater. 136 (2017) 41–45]
  120. Coercivity enhancement of hot-deformed Ce-Fe-B magnets by grain boundary infiltration of Nd-Cu eutectic alloy
  121. Advanced CPP-GMR Spin-Valve Sensors for Narrow Reader Applications
  122. Heat-assisted magnetic recording media materials
  123. Microstructural evolution of perpendicular magnetization films with an ultra-thin Co2FeAl/MgAl2O4(001) structure
  124. Read sensor technology for ultrahigh density magnetic recording
  125. Temperature and field direction dependences of first-order reversal curve (FORC) diagrams of hot-deformed Nd-Fe-B magnets
  126. Giant tunnel magnetoresistance in polycrystalline magnetic tunnel junctions with highly textured MgAl2O4(001) based barriers
  127. Advances in Nd-Fe-B Based Permanent Magnets
  128. Alloy Design for the Development of Heat Treatable High Strength Mg Sheet Alloy with Excellent Room Temperature Formability
  129. Development of Heat-Treatable High-Strength Mg–Zn–Ca–Zr Sheet Alloy with Excellent Room Temperature Formability
  130. Enhancement of current-perpendicular-to-plane giant magnetoresistive outputs by improving B2-order in polycrystalline Co2(Mn0.6Fe0.4)Ge Heusler alloy films with the insertion of amorphous CoFeBTa underlayer
  131. Improving mechanical properties and yield asymmetry in high-speed extrudable Mg-1.1Al-0.24Ca (wt%) alloy by high Mn addition
  132. Highly efficient voltage control of spin and enhanced interfacial perpendicular magnetic anisotropy in iridium-doped Fe/MgO magnetic tunnel junctions
  133. Paths to Open Access: an update from Acta Materialia, Inc.
  134. Investigation of spin-dependent transports and microstructure in NiMnSb-based magnetoresistive devices
  135. Interfacial perpendicular magnetic anisotropy and electric field effect in Ta/CoFeB/Mg1−xTixO heterostructures
  136. Giant interfacial perpendicular magnetic anisotropy in Fe/CuIn1−xGaxSe2 beyond Fe/MgO
  137. Micromagnetic Studies at Finite Temperature on FePt–C Granular Films
  138. High-throughput direct measurement of magnetocaloric effect based on lock-in thermography technique
  139. Paths to open access: An update from Acta Materialia, Inc.
  140. Annealing effect on current-driven domain wall motion in Pt/[Co/Ni] wire
  141. Intrinsic hard magnetic properties of Sm(Fe 1−x Co x ) 12 compound with the ThMn 12 structure
  142. A heat-treatable Mg–Al–Ca–Mn–Zn sheet alloy with good room temperature formability
  143. Paths to Open Access: An update from Acta Materialia, Inc.
  144. Structural origin of hysteresis for hexagonal (Mn,Fe) 2 (P,Si) magneto-caloric compound
  145. Magnetization reversal of exchange-coupled and exchange-decoupled Nd-Fe-B magnets observed by magneto-optical Kerr effect microscopy
  146. Enhanced mechanical properties in fully recrystallized ultrafine grained ZKX600 Mg alloy
  147. Pt surface segregation in L1 0 -FePt nano-grains
  148. Static recrystallization behaviour of cold rolled Mg-Zn-Y alloy and role of solute segregation in microstructure evolution
  149. Voltage controlled interfacial magnetism through platinum orbits
  150. Increased magnetic damping in ultrathin films of Co2FeAl with perpendicular anisotropy
  151. Enhancement of L21 order and spin-polarization in Co2FeSi thin film by substitution of Fe with Ti
  152. Improved (0 0 1)-texture of FePt-C for heat-assisted magnetic recording media by insertion of Cr buffer layer
  153. Change of deformation mechanisms in ultrafine grained Mg-Zn-Zr-Ca alloy
  154. Strong and ductile age-hardening Mg-Al-Ca-Mn alloy that can be extruded as fast as aluminum alloys
  155. High frequency out-of-plane oscillation with large cone angle in mag-flip spin torque oscillators for microwave assisted magnetic recording
  156. Enhanced CPP-GMR effect by improved B2-order of Co2(Mn0.6Fe0.4)Ge Heusler layer deposited on amorphous CoFeBTa underlayer: A quantitative estimation of site-disordering by anomalous x-ray diffraction
  157. Epitaxial magnetic tunnel junctions with a low barrier height spinel MgGa2O4
  158. Layer thickness effects and microstructure of CPP-GMR spin-valves with Ag/InZnO/Zn conductive oxide-based spacer layers
  159. Micromagnetic studies at finite temperature on FePt-C granular films
  160. Origin of in-plane component for L10-FePt granular films deposited on MgO single crystal substrate
  161. Propagation of magnetic domains in exchange coupled and exchange decoupled Nd-Fe-B magnets observed by magneto-optic Kerr effect
  162. Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures
  163. MgGa2O4 spinel barrier for magnetic tunnel junctions: Coherent tunneling and low barrier height
  164. Perpendicular magnetic anisotropy at lattice-matched Co2FeAl/MgAl2O4(001) epitaxial interfaces
  165. Coercivity enhancement of hot-deformed Nd-Fe-B magnets by the eutectic grain boundary diffusion process using Nd 62 Dy 20 Al 18 alloy
  166. Correlation of microchemistry of cell boundary phase and interface structure to the coercivity of Sm(Co0.784Fe0.100Cu0.088Zr0.028)7.19 sintered magnets
  167. Microstructure and in-plane component of L10-FePt films deposited on MgO and MgAl2O4 substrates
  168. Microstructure and magnetic properties of grain boundary modified recycled Nd-Fe-B sintered magnets
  169. Temperature-dependent first-order reversal curve measurements on unusually hard magnetic low-temperature phase of MnBi
  170. Coercivities of hot-deformed magnets processed from amorphous and nanocrystalline precursors
  171. Development of High-Strength High-Speed-Extrudable Mg–Al–Ca–Mn Alloy
  172. Effect of Ca on the Microstructure, Texture and Mechanical Properties in Mg–Zn–Mn Based Alloy
  173. Micromagnetic Simulations of Magnetization Reversals in Nd-Fe-B Based Permanent Magnets
  174. Microstructure of Nd-Fe-B Sintered Magnets—Structure of Grain Boundaries and Interface
  175. High output voltage of magnetic tunnel junctions with a Cu(In0.8Ga0.2)Se2semiconducting barrier with a low resistance–area product
  176. Effect of Mg-Al insertion on magnetotransport properties in epitaxial Fe/sputter-deposited MgAl2O4/Fe(001) magnetic tunnel junctions
  177. Interdiffusion in epitaxial ultrathin Co2FeAl/MgO heterostructures with interface-induced perpendicular magnetic anisotropy
  178. On the synthesis and microstructure analysis of high performance MnBi
  179. Accumulative Magnetic Switching of Ultrahigh-Density Recording Media by Circularly Polarized Light
  180. Strain measurement in ferromagnetic crystals using dark-field electron holography
  181. Tuning the magnetic properties and surface morphology of D022 Mn3-δGa films with high perpendicular magnetic anisotropy by N doping
  182. Influence of MgO underlayers on the structure and magnetic properties of FePt-C nanogranular films for heat-assisted magnetic recording media
  183. Large magnetoresistance in Heusler-alloy-based epitaxial magnetic junctions with semiconducting Cu(In0.8Ga0.2)Se2 spacer
  184. Atom probe analysis and magnetic properties of nanocrystalline Fe84.3Si4B8P3Cu0.7
  185. Magnetic tunnel junctions with a rock-salt-type Mg1−xTixO barrier for low resistance area product
  186. Magnetization reversal of FePt based exchange coupled composite media
  187. Realization of high quality epitaxial current- perpendicular-to-plane giant magnetoresistive pseudo spin-valves on Si(001) wafer using NiAl buffer layer
  188. Coercivity enhancement of hot-deformed Nd-Fe-B magnets by the eutectic grain boundary diffusion process
  189. Large-scale micromagnetic simulation of Nd-Fe-B sintered magnets with Dy-rich shell structures
  190. Micromagnetic simulation of the orientation dependence of grain boundary properties on the coercivity of Nd-Fe-B sintered magnets
  191. The influence of grain morphology and easy axis orientation on the coercivity of Sm(Co0.9Cu0.1)5 thin films
  192. MgAl2O4(001) based magnetic tunnel junctions made by direct sputtering of a sintered spinel target
  193. Large enhancement of bulk spin polarization by suppressing CoMnanti-sites in Co2Mn(Ge0.75Ga0.25) Heusler alloy thin film
  194. Current-perpendicular-to-plane giant magnetoresistive properties in Co2Mn(Ge0.75Ga0.25)/Cu2TiAl/Co2Mn(Ge0.75Ga0.25) all-Heusler alloy pseudo spin valve
  195. Enhancement of magnetoresistance by inserting thin NiAl layers at the interfaces in Co2FeGa0.5Ge0.5/Ag/Co2FeGa0.5Ge0.5 current-perpendicular-to-plane pseudo spin valves
  196. Reduction of critical current density for out-of-plane mode oscillation in a mag-flip spin torque oscillator using highly spin-polarized Co2Fe(Ga0.5Ge0.5) spin injection layer
  197. Temperature dependence of magneto-transport properties in Co2Fe(Ga0.5Ge0.5)/Cu lateral spin valves
  198. Anisotropic magnetoresistance and current-perpendicular-to-plane giant magnetoresistance in epitaxial NiMnSb-based multilayers
  199. Temperature-dependent magnetization reversal process and coercivity mechanism in Nd-Fe-B hot-deformed magnets
  200. Correlation between the spin Hall angle and the structural phases of early 5d transition metals
  201. Strain measurements from Nd2Fe14B grains in sintered magnets using artificial moiré fringes
  202. Columnar Structure in FePt–C Granular Media for Heat-Assisted Magnetic Recording
  203. High spin polarization and spin splitting in equiatomic quaternary CoFeCrAl Heusler alloy
  204. Polycrystalline CPP-GMR Pseudospin Valves Using $\langle {001}\rangle $ Textured Co2Fe(Ga0.5Ge0.5) Layer Grown on a Conductive (Mg0.5Ti...
  205. Enhancement of current-perpendicular-to-plane giant magnetoresistance in Heusler-alloy based pseudo spin valves by using a CuZn spacer layer
  206. Perpendicularly magnetized (001)-textured D022 MnGa films grown on an (Mg0.2Ti0.8)O buffer with thermally oxidized Si substrates
  207. Comment on “Current perpendicular to film plane type giant magnetoresistance effect using a Ag–Mg spacer and Co2Fe0.4Mn0.6Si Heusler alloy electrodes”
  208. Microstructure and temperature dependent of coercivity of hot-deformed Nd–Fe–B magnets diffusion processed with Pr–Cu alloy
  209. Strong and ductile heat-treatable Mg–Sn–Zn–Al wrought alloys
  210. Large magnetoresistance in current-perpendicular-to-plane pseudo spin-valves using Co2Fe(Ga0.5Ge0.5) Heusler alloy and AgZn spacer
  211. Corrigendum to “Coercivity of Sm(Co0.9Cu0.1)4.8 melt-spun ribbons” [J. Alloys Compd. 436 (2007) 358–363]
  212. Order parameters and magnetocrystalline anisotropy of off-stoichiometric D022 Mn2.36Ga epitaxial films grown on MgO (001) and SrTiO3 (001)
  213. Ferromagnetic MnGaN thin films with perpendicular magnetic anisotropy for spintronics applications
  214. Effect of MgO underlayer misorientation on the texture and magnetic property of FePt–C granular film
  215. Crystal orientation dependence of band matching in all-B2-trilayer current-perpendicular-to-plane giant magnetoresistance pseudo spin-valves using Co2Fe(Ge0.5Ga0.5) Heusler alloy and NiAl spacer
  216. Energy barrier analysis on hot-deformed Nd-Fe-B magnets
  217. High-speed extrusion of heat-treatable Mg–Al–Ca–Mn dilute alloy
  218. On the prismatic precipitate plates in Mg–Ca–In alloys
  219. Polycrystalline CPP-GMR devices using <001> textured Co2Fe(Ga0.5Ge0.5) Heusler alloy layer and conductive Mg0.5Ti0.5Ox buffer layer
  220. Thermal stability of coercivity in grain boundary modified anisotropic hot-deformed Nd-Fe-B magnets
  221. Rare-Earth Lean Hard Magnet Compound NdFe12N
  222. Preparation, Characterization, and Modeling of Ultrahigh Coercivity Sm-Co Thin Films
  223. Spin gapless semiconducting behavior in equiatomic quaternary CoFeMnSi Heusler alloy
  224. Investigation of the quaternary Fe2− xCoxMnSi (0 ≤x≤ 0.6) alloys by structural, magnetic, resistivity and spin polarization measurements
  225. Origin of an IsothermalR-Martensite Formation in Ni-rich Ti-Ni Solid Solution: Crystallization of Strain Glass
  226. Effect of carbon on the coercivity and microstructure in fine-grained Nd–Fe–B sintered magnet
  227. Hard magnetic properties of spacer-layer-tuned NdFeB/Ta/Fe nanocomposite films
  228. Mechanism of the texture development in hydrogen-disproportionation–desorption-recombination (HDDR) processed Nd–Fe–B powders
  229. Influence of boron diffusion on the perpendicular magnetic anisotropy in Ta|CoFeB|MgO ultrathin films
  230. Grain size dependence of coercivity of hot-deformed Nd–Fe–B anisotropic magnets
  231. NdFe12N hard-magnetic compound with high magnetization and anisotropy field
  232. Lattice-matched magnetic tunnel junctions using a Heusler alloy Co2FeAl and a cation-disorder spinel Mg-Al-O barrier
  233. Faceted shell structure in grain boundary diffusion-processed sintered Nd–Fe–B magnets
  234. Solute clustering and grain boundary segregation in extruded dilute Mg–Gd alloys
  235. High spin polarization in CoFeMnGe equiatomic quaternary Heusler alloy
  236. Direct observation of ferromagnetism in grain boundary phase of Nd-Fe-B sintered magnet using soft x-ray magnetic circular dichroism
  237. Effect of microalloyed Zr on the extruded microstructure of Mg–6.2Zn-based alloys
  238. Micromagnetic Simulations of Magnetization Reversal in Misaligned Multigrain Magnets With Various Grain Boundary Properties Using Large-Scale Parallel Computing
  239. Microstructure and Magnetic Properties of FePt–Cr2O3 Films
  240. Micromagnetic simulations on the grain size dependence of coercivity in anisotropic Nd–Fe–B sintered magnets
  241. All-optical control of ferromagnetic thin films and nanostructures
  242. A 4-Fold-Symmetry Hexagonal Ruthenium for Magnetic Heterostructures Exhibiting Enhanced Perpendicular Magnetic Anisotropy and Tunnel Magnetoresistance
  243. High strength and formable Mg–6.2Zn–0.5Zr–0.2Ca alloy sheet processed by twin roll casting
  244. Crystal orientation dependence of current-perpendicular-to-plane giant magnetoresistance of pseudo spin-valves with epitaxial Co2Fe(Ge0.5Ga0.5) Heusler alloy layers
  245. Mechanism of coercivity enhancement by Ag addition in FePt-C granular films for heat assisted magnetic recording media
  246. High-coercivity hot-deformed Nd–Fe–B permanent magnets processed by Nd–Cu eutectic diffusion under expansion constraint
  247. Magnetism of ultrathin intergranular boundary regions in Nd–Fe–B permanent magnets
  248. Low temperature diffusion process using rare earth-Cu eutectic alloys for hot-deformed Nd-Fe-B bulk magnets
  249. Magneto-transport and microstructure of Co2Fe(Ga0.5Ge0.5)/Cu lateral spin valves prepared by top-down microfabrication process
  250. Microstructural and magnetic properties study of Fe–P rolled sheet alloys
  251. Quantitative analysis of anisotropic magnetoresistance in Co2MnZ and Co2FeZ epitaxial thin films: A facile way to investigate spin-polarization in half-metallic Heusler compounds
  252. Thermal engineering of non-local resistance in lateral spin valves
  253. Enhancing the high temperature plasticity of a Cu-containing austenitic stainless steel through grain boundary strengthening
  254. Microstructure evolution of hot-deformed Nd-Fe-B anisotropic magnets
  255. Microstructure and magnetic properties of FePt–TiC–C granular thin films for perpendicular recording
  256. Magnetic and structural properties of MnBi multilayered thin films
  257. Laser-assisted atom probe tomography of 18O-enriched oxide thin film for quantitative analysis of oxygen
  258. Physical Metallurgy
  259. Effect of extrusion conditions on microstructure and mechanical properties of microalloyed Mg–Sn–Al–Zn alloys
  260. Erratum to: Plasma Nitriding Behavior of Fe-C-M (M = Al, Cr, Mn, Si) Ternary Martensitic Steels
  261. ⟨001⟩ textured polycrystalline current-perpendicular-to-plane pseudo spin-valves using Co2Fe(Ga0.5Ge0.5) Heusler alloy
  262. Large perpendicular magnetic anisotropy at Fe/MgO interface
  263. Atom probe analysis on interaction between Cr and N in bake-hardening steels with anti-aging properties at RT
  264. Enhancement of coercivity of hot-deformed Nd–Fe–B anisotropic magnet by low-temperature grain boundary diffusion of Nd60Dy20Cu20 eutectic alloy
  265. Growth of a High-Quality Ultrathin Fe(001) Layer on MgO(001) by Insertion of an Ultrathin γ-Fe2O3Layer
  266. High-coercivity ultrafine-grained anisotropic Nd–Fe–B magnets processed by hot deformation and the Nd–Cu grain boundary diffusion process
  267. Low-resistive monocrystalline Mg-Al-O barrier magnetic tunnel junctions for spin-transfer magnetization switching
  268. On the role of Ta cap in the recrystallization process of CoFeB layers
  269. Plasma Nitriding Behavior of Fe-C-M (M = Al, Cr, Mn, Si) Ternary Martensitic Steels
  270. Temperature dependence of magnetoresistive output of pseudo spin valves with Co2Fe(Al1−xSix) Heusler alloys and a Ag spacer
  271. Correlative multi-scale characterization of a fine grained Nd–Fe–B sintered magnet
  272. Origin of intergranular fracture in martensitic 8Mn steel at cryogenic temperatures
  273. The origin of the coercivity reduction of Nd–Fe–B sintered magnet annealed below an optimal temperature
  274. Polycrystalline current-perpendicular-to-plane giant magnetoresistance pseudo spin-valves using Co2Mn(Ga0.25Ge0.75) Heusler alloy
  275. Effect of Nd content on the microstructure and coercivity of hot-deformed Nd–Fe–B permanent magnets
  276. High-coercivity Nd–Fe–B thick films without heavy rare earth additions
  277. Microstructure evolution during homogenization of Al–Mn–Fe–Si alloys: Modeling and experimental results
  278. Enhancement of giant magnetoresistance by L21 ordering in Co2Fe(Ge0.5Ga0.5) Heusler alloy current-perpendicular-to-plane pseudo spin valves
  279. Current-Perpendicular-to-Plane Giant Magnetoresistance in Pseudo Spin Valves With $\hbox{Co}_{2}\hbox{Fe}(\hbox{Ge}_{0.5}\hbox{Ga}_{0.5})$ Heusler Alloy Ferromagnetic Layers and Cu/Ag Spacer
  280. Evidence for nano-Si clusters in amorphous SiO anode materials for rechargeable Li-ion batteries
  281. Microstructure and Magnetic Properties of FePt-MO$_{\rm x}$ Granular Films
  282. The effect of Ag and Ca additions on the age hardening response of Mg–Zn alloys
  283. Structure and magnetoresistance of current-perpendicular-to-plane pseudo spin valves using Co2Mn(Ga0.25Ge0.75) Heusler alloy
  284. Structure and magnetoresistive properties of current-perpendicular-to-plane pseudo-spin valves using polycrystalline Co2Fe-based Heusler alloy films
  285. Microstructure Control of L10-Ordered FePt Granular Film for Heat-Assisted Magnetic Recording (HAMR) Media
  286. Electrically conductive (Mg0.2Ti0.8)O underlayer to grow FePt-based perpendicular recording media on glass substrates
  287. High-pressure torsion for enhanced atomic diffusion and promoting solid-state reactions in the aluminum–copper system
  288. Significant enhancement of the age-hardening response in Mg–10Sn–3Al–1Zn alloy by Na microalloying
  289. Correction: Nd2Fe14B/FeCo Anisotropic Nanocomposite Films with a Large Maximum Energy Product
  290. The mechanism of coercivity enhancement by the grain boundary diffusion process of Nd–Fe–B sintered magnets
  291. Compositional optimization of Mg–Sn–Al alloys for higher age hardening response
  292. Coercivity enhancement of rapidly solidified Nd–Fe–B magnet powders
  293. L1$_{0}$-Ordered FePt-Based Perpendicular Magnetic Recording Media for Heat-Assisted Magnetic Recording
  294. Current-perpendicular-to-plane giant magnetoresistance using Co2Fe(Ga1−xGex) Heusler alloy
  295. Effect of Zr addition on the precipitation in Mg–Zn-based alloy
  296. Laser-assisted field evaporation from insulators triggered by photoinduced hole accumulation
  297. Enhanced tunnel magnetoresistance in a spinel oxide barrier with cation-site disorder
  298. Effect of ball-milling surfactants on the interface chemistry in hot-compacted SmCo5 magnets
  299. Growth and characterization of n-type electron-induced ferromagnetic semiconductor (In,Fe)As
  300. Nd2Fe14B/FeCo Anisotropic Nanocomposite Films with a Large Maximum Energy Product
  301. Spin polarization and Gilbert damping of Co2Fe(GaxGe1−x) Heusler alloys
  302. Size estimation of embedded Cu nanoprecipitates in Fe by using affinitively trapped positrons
  303. Spin Polarization of Alternate Monatomic Epitaxial [Fe/Co]$_{n}$ Superlattice
  304. Microstructures and mechanical properties of extruded and heat treated Mg–6Zn–1Si–0.5Mn alloys
  305. Strategy for high-coercivity Nd–Fe–B magnets
  306. G-phase precipitation in austenitic stainless steel deformed by high pressure torsion
  307. Enhanced coercivity of spark plasma sintered Zn-bonded Sm–Fe–N magnets
  308. The effect of the thermal decomposition reaction on the mechanical and magnetocaloric properties of La(Fe,Si,Co)13
  309. Co-Based Heusler Alloys for CPP-GMR Spin-Valves With Large Magnetoresistive Outputs
  310. Transmission electron microscopy study on the effect of various capping layers on CoFeB/MgO/CoFeB pseudo spin valves annealed at different temperatures
  311. Mechanical properties and microstructures of Al–1Fe–(0-1)Zr bulk nano-crystalline alloy processed by mechanical alloying and spark plasma sintering
  312. Structural Characterization of Sputter-Deposited 304 Stainless Steel+10 wt pct Al Coatings
  313. Effects of boron composition on tunneling magnetoresistance ratio and microstructure of CoFeB/MgO/CoFeB pseudo-spin-valve magnetic tunnel junctions
  314. Effect of Li additions on the age hardening response and precipitate microstructures of Mg–2.4Zn–0.16Zr based alloys
  315. Effect of NiAl underlayer and spacer on magnetoresistance of current-perpendicular-to-plane spin valves using Co2Mn(Ga0.5Sn0.5) Heusler alloy
  316. Grain boundary and interface chemistry of an Nd–Fe–B-based sintered magnet
  317. Magnetic properties and spin polarization of Co2Mn(SixSn1−x) alloys containing two L21 phases
  318. All-metallic lateral spin valves using Co2Fe(Ge0.5Ga0.5) Heusler alloy with a large spin signal
  319. Microalloying Effect on the Precipitation Processes of Mg-Ca Alloys
  320. Microscopic Observation of the Interface between a Tool Surface and Deposits of Low-Carbon Free Cutting Steel
  321. Microstructure-Coercivity Relationships of Nd-Fe-B Base Permanent Magnets
  322. Bi-quadratic interlayer exchange coupling in Co2MnSi/Ag/Co2MnSi pseudo spin-valve
  323. Effect of double aging and microalloying on the age hardening behavior of a Mg–Sn–Zn alloy
  324. Microstructure optimization to achieve high coercivity in anisotropic Nd–Fe–B thin films
  325. Spin polarization measurements of Co2Mn (Ga0.5Sn0.5) thin films
  326. Unexpected influence of Mn addition on the creep properties of a cast Mg–2Al–2Ca (mass%) alloy
  327. Influence of the wavelength on the spatial resolution of pulsed-laser atom probe
  328. Oscillatory antiferromagnetic interlayer exchange coupling in Co2Fe(Al0.5Si0.5)/Ag/Co2Fe(Al0.5Si0.5) films and its application to trilayer magnetoresistive sensor
  329. Large amplitude microwave emission and reduced nonlinear phase noise in Co2Fe(Ge0.5Ga0.5) Heusler alloy based pseudo spin valve nanopillars
  330. Characterization of the microstructure of dual-phase 9Cr-ODS steels using a laser-assisted 3D atom probe
  331. FePtAg-C Nanogranular Film as Thermally Assisted Magnetic Recording (TAR) Media
  332. Microstructure of fine-grained Nd–Fe–B sintered magnets with high coercivity
  333. 73 mm-diameter bulk metallic glass rod by copper mould casting
  334. High-strength extruded Mg–Al–Ca–Mn alloy
  335. Erratum: “Effect of the number of layers on determination of spin asymmetries in current-perpendicular-to-plane giant magnetoresistance” [Appl. Phys. Lett. 98, 042503 (2011)]
  336. Erratum: “Large magnetoresistance in current-perpendicular-to-plane pseudo spin valve using a Co2Fe(Ge0.5Ga0.5) Heusler alloy” [Appl. Phys. Lett. 98, 152501 (2011)]
  337. Atomic scale characterization of GaInN/GaN multiple quantum wells in V-shaped pits
  338. Designed metamagnetism in CoMnGe1−xPx
  339. Distribution of Dy in high-coercivity (Nd,Dy)–Fe–B sintered magnet
  340. Microstructure and mechanical properties of annealed SUS 304H austenitic stainless steel with copper
  341. Broadening the applications of the atom probe technique by ultraviolet femtosecond laser
  342. Effect of laser power and specimen temperature on atom probe analyses of magnesium alloys
  343. Laser assisted atom probe analysis of thin film on insulating substrate
  344. Laser assisted field evaporation of oxides in atom probe analysis
  345. Mechanism of laser assisted field evaporation from insulating oxides
  346. Quantitative atom probe analyses of rare-earth-doped ceria by femtosecond pulsed laser
  347. Quantitative laser atom probe analyses of hydrogenation-disproportionated Nd–Fe–B powders
  348. Large magnetoresistance in current-perpendicular-to-plane pseudospin valve using a Co2Fe(Ge0.5Ga0.5) Heusler alloy
  349. Change in local environment upon quasicrystallization of Zr–Cu glassy alloys by addition of Pd and Pt
  350. Low-temperature grown quaternary Heusler-compound Co2Mn1−xFexSi films on Ge(111)
  351. Precipitation of nanosized nitrides in plasma nitrided Fe–M (M = Al, Cr, Ti, V) alloys
  352. Interfacial resistance and spin-dependent scattering in the current-perpendicular-to-plane giant magnetoresistance using Co2Fe(Al0.5Si0.5) Heusler alloy and Ag
  353. Enhancement of current-perpendicular-to-plane giant magnetoresistance by insertion of Co50Fe50 layers at the Co2Mn(Ga0.5Sn0.5)/Ag interface
  354. L1-ordered FePtAg–C granular thin film for thermally assisted magnetic recording media (invited)
  355. The effect of substitution of Fe with Cr on the giant magnetoresistance of current-perpendicular-to-plane spin valves with Co2FeSi Heusler alloy
  356. A plastic Zr–Cu–Ag–Al bulk metallic glass
  357. Microstructures and tensile properties of a twin roll cast and heat-treated Mg–2.4Zn–0.1Ag–0.1Ca–0.1Zr alloy
  358. Effect of the number of layers on determination of spin asymmetries in current-perpendicular-to-plane giant magnetoresistance
  359. Coercivity enhancement of HDDR-processed Nd–Fe–B permanent magnet with the rapid hot-press consolidation process
  360. Effect of film morphology on the magnetic properties for Nd–Fe–B thin films
  361. Precipitation of prismatic plates in Mg–0.3Ca alloys with In additions
  362. Carbon Enrichment in Retained Austenite Films in Low Carbon Lath Martensite Steel
  363. Crystallinity and Transport Properties in Fe/MgAl2O4/Fe (001) Epitaxial Magnetic Tunnel Junctions
  364. Microscopic Observation of the Interface between a Tool Wear Surface and Deposits from a Low Carbon Free Cutting Steel Machined
  365. Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials
  366. Coercivity enhancement of hydrogenation–disproportionation–desorption–recombination processed Nd–Fe–B powders by the diffusion of Nd–Cu eutectic alloys
  367. Current-perpendicular-to-plane spin valves with a Co2Mn(Ga0.5Sn0.5) Heusler alloy
  368. High coercivity FePt–C bulk magnet processed by spark plasma sintering and hot deformation
  369. Nano-sized disorders in hard magnetic grains and their influence on magnetization reversal at artificial Nd/Nd2Fe14B interfaces
  370. Stress-induced magnetic and structural anisotropy of nanocrystalline Fe-based alloys
  371. FePtAg–C nanogranular films fabricated on a heat resistant glass substrate for perpendicular magnetic recording
  372. Enhanced precipitation hardening of Mg–Ca alloy by Al addition
  373. Towards the development of heat-treatable high-strength wrought Mg alloys
  374. L10-ordered high coercivity (FePt)Ag–C granular thin films for perpendicular recording
  375. Fabrication and characterization of highly textured Nd–Fe–B thin film with a nanosized columnar grain structure
  376. Laser-assisted three-dimensional atom probe analysis of dopant distribution in Gd-doped CeO2
  377. Spin polarization of currents in Co/Pt multilayer and Co–Pt alloy thin films
  378. Structure and transport properties of current-perpendicular-to-plane spin valves using Co2FeAl0.5Si0.5 and Co2MnSi Heusler alloy electrodes
  379. Giant Peltier Effect in a Submicron-Sized Cu–Ni/Au Junction with Nanometer-Scale Phase Separation
  380. Bulk and interfacial scatterings in current-perpendicular-to-plane giant magnetoresistance with Co2Fe(Al0.5Si0.5) Heusler alloy layers and Ag spacer
  381. Tunnel magnetoresistance with improved bias voltage dependence in lattice-matched Fe/spinel MgAl2O4/Fe(001) junctions
  382. Tunnel magnetoresistance properties and film structures of double MgO barrier magnetic tunnel junctions
  383. Grain boundary structure and chemistry of Dy-diffusion processed Nd–Fe–B sintered magnets
  384. Hardening and microstructural evolution in A533B steels under neutron irradiation and a direct comparison with electron irradiation
  385. Coherent tunneling and giant tunneling magnetoresistance inCo2FeAl/MgO/CoFemagnetic tunneling junctions
  386. Effect of Zr addition on the mechanical properties of as-extruded Mg–Zn–Ca–Zr alloys
  387. High spin-filter efficiency in a Co ferrite fabricated by a thermal oxidation
  388. Enhanced Spin Polarization of Co2MnGe Heusler Alloy by Substitution of Ga for Ge
  389. Structural characterizations of Co2MnSi/MgO/Co2MnSi magnetic tunnel junctions by transmission electron microscopy
  390. Effect of Al additions on the age hardening response of the Mg–2.4Zn–0.1Ag–0.1Ca (at.%) alloy—TEM and 3DAP study
  391. Effect of Ga addition on the microstructure and magnetic properties of hydrogenation–disproportionation–desorption–recombination processed Nd–Fe–B powder
  392. Age-hardening response of Mg–0.3at.%Ca alloys with different Zn contents
  393. Anisotropic Nd–Fe–B nanocrystalline magnets processed by spark plasma sintering and in situ hot pressing of hydrogenation–decomposition–desorption–recombination powder
  394. Consolidation of hydrogenation–disproportionation–desorption–recombination processed Nd–Fe–B magnets by spark plasma sintering
  395. Bimodally grained microstructure development during hot extrusion of Mg–2.4 Zn–0.1 Ag–0.1 Ca–0.16 Zr (at.%) alloys
  396. Atom-Probe Tomographic Studies of Thin Films and Multilayers
  397. Homogeneity of the superplastic Zr64.13Cu15.75Ni10.12Al10 bulk metallic glass
  398. Laser-assisted atom probe analysis of zirconia/spinel nanocomposite ceramics
  399. Mechanical alloying and amorphization in Cu–Nb–Ag in situ composite wires studied by transmission electron microscopy and atom probe tomography
  400. High saturation magnetization and microstructure in melt-spun Fe–P ribbons
  401. Three-dimensional atom probe study of Fe–B-based nanocrystalline soft magnetic materials
  402. Microstructure and mechanical properties of Al–Zr nanocomposite materials
  403. Transmission electron microscopy investigation of CoFeB/MgO/CoFeB pseudospin valves annealed at different temperatures
  404. Effect of melt temperature on the mechanical properties of bulk metallic glasses
  405. Heat-treatable Mg–Sn–Zn wrought alloy
  406. Microstructure and mechanical properties of bulk nanocrystalline Al–Fe alloy processed by mechanical alloying and spark plasma sintering
  407. Precipitation hardenable Mg–Bi–Zn alloys with prismatic plate precipitates
  408. Demonstration of Half-Metallicity in Fermi-Level-Tuned Heusler AlloyCo2FeAl0.5Si0.5at Room Temperature
  409. Bimodally grained high-strength Fe fabricated by mechanical alloying and spark plasma sintering
  410. Complementary use of transmission electron microscopy and atom probe tomography for the investigation of steels nanostructured by severe plastic deformation
  411. The building block of long-period structures in Mg–RE–Zn alloys
  412. Spin polarization of Fe4N thin films determined by point-contact Andreev reflection
  413. Spin-polarized tunneling spectroscopy of fully epitaxial magnetic tunnel junctions usingCo2FeAl0.5Si0.5Heusler alloy electrodes
  414. Highly spin-polarized Co2MnGa0.5Sn0.5 Heusler compound
  415. Direct evidence for Cu concentration variation and its correlation to coercivity in Sm(Co0.74Fe0.1Cu0.12Zr.04)7.4 ribbons
  416. Influence of laser irradiation condition on a femtosecond laser-assisted tomographic atom probe
  417. 3DAP analysis of (Ga,Mn)As diluted magnetic semiconductor thin film
  418. Coercive field and energy barriers in partially disordered FePt nanoparticles
  419. Current-perpendicular-to-plane giant magnetoresistance of a spin valve using Co2MnSi Heusler alloy electrodes
  420. Fe–Ta–C soft underlayer for double-layered perpendicular recording media
  421. FePt-C nanogranular films for perpendicular magnetic recording
  422. Interlayer exchange coupling in Co2FeAl0.5Si0.5/Cr/Co2FeAl0.5Si0.5 trilayers
  423. Interlayer thickness dependence of 90° exchange coupling in Co2MnAl/Cr/Co2MnAl epitaxial trilayer structures
  424. Spin polarization of Co–Fe alloys estimated by point contact Andreev reflection and tunneling magnetoresistance
  425. The effect of oxygen on the surface coercivity of Nd-coated Nd–Fe–B sintered magnets
  426. The origin of coercivity decrease in fine grained Nd–Fe–B sintered magnets
  427. The role of grain boundaries in the coercivity of hydrogenation disproportionation desorption recombination processed Nd–Fe–B powders
  428. Suppression of magnon excitations in Co2MnSi Heusler alloy by Nd doping
  429. Effect of post-sinter annealing on the coercivity and microstructure of Nd–Fe–B permanent magnets
  430. Precipitation-hardenable Mg–2.4Zn–0.1Ag–0.1Ca–0.16Zr (at.%) wrought magnesium alloy
  431. The role of Cu addition in the coercivity enhancement of sintered Nd-Fe-B permanent magnets
  432. Antiferromagnetism and Spin Polarization in Double Perovskite SrLaVMoO6
  433. Composition and non-equilibrium crystallization in partially devitrified co-rich soft magnetic nanocomposite alloys
  434. A New Method for Size Estimation of Cu Nano-precipitates in Fe Based on Positron Quantum-dot Confinement
  435. Geometry Constrained Plasticity of Bulk Metallic Glass
  436. Laser-Assisted Atom Probe Analysis of Bulk Insulating Ceramics
  437. Purpose and Objectives of “Project for High Performance Anisotropic Nanocomposite Permanent Magnets with Low Rare-Earth Content”
  438. Structural Defects in GaN-based Materials and Their Relation to GaN-based Laser Diodes
  439. Structure of shear bands in Pd40Ni40P20 bulk metallic glass
  440. Solute segregation and precipitation in a creep-resistant Mg–Gd–Zn alloy
  441. A high-strength Mg–Sn–Zn–Al alloy extruded at low temperature
  442. Effect of pre-aging and Al addition on age-hardening and microstructure in Mg-6wt% Zn alloys
  443. The effect of iron addition on the spin polarization and magnetic properties of Co2CrGa Heusler alloy
  444. The effect of nanocrystallization and free volume on the room temperature plasticity of Zr-based bulk metallic glasses
  445. L10FePt–C Nanogranular Perpendicular Anisotropy Films with Narrow Size Distribution
  446. Current-perpendicular-to-plane giant magnetoresistance in spin-valve structures using epitaxial Co2FeAl0.5Si0.5/Ag/Co2FeAl0.5Si0.5 trilayers
  447. Coercivity mechanism of hydrogenation disproportionation desorption recombination processed Nd–Fe–B based magnets
  448. Boron segregation in crystallized MgO/amorphous-Co40Fe40B20 thin films
  449. Bulk nanocrystalline Al85Ni10La5 alloy fabricated by spark plasma sintering of atomized amorphous powders
  450. Exchange bias of spin valve structure with a top-pinned Co40Fe40B20∕IrMn
  451. The enhancement of the spin polarization of Co2MnSn by Fe doping
  452. Synthesis of high-strength bimodally grained iron by mechanical alloying and spark plasma sintering
  453. Particulate structure of L10 ordered ultrathin FePt films for perpendicular recording
  454. Phase relationship, microstructure and magnetocaloric effect in Gd1−x(Si0.5Ge0.5)xalloys
  455. Effect of base pressure on the structure and magnetic properties of FePt thin films
  456. Microstructure of CoNiFeB electroless-deposited soft magnetic underlayer for perpendicular recording media
  457. Thermal embrittlement of Fe-based amorphous ribbons
  458. Microstructure and magnetic properties of FePt-SiO2 granular films with Ag addition
  459. Effect of partitioning of Mn and Si on the growth kinetics of cementite in tempered Fe–0.6 mass% C martensite
  460. Enhanced age hardening in a Mg–2.4at.% Zn alloy by trace additions of Ag and Ca
  461. Large apparent compressive strain of metallic glasses
  462. Effect of Cr substitution for Fe on the spin polarization of Co2CrxFe1−xSi Heusler alloys
  463. A high-strength bulk nanocrystalline Al–Fe alloy processed by mechanical alloying and spark plasma sintering
  464. Irradiation induced precipitates in vanadium alloys studied by atom probe microanalysis
  465. Structure, magnetic property, and spin polarization of Co2FeAlxSi1−x Heusler alloys
  466. Ab initiopredictions for the effect of disorder and quarternary alloying on the half-metallic properties of selected Co2Fe-based Heusler alloys
  467. Effect of Zn additions on the age-hardening of Mg–2.0Gd–1.2Y–0.2Zr alloys
  468. Plasticity and microstructure of Zr–Cu–Al bulk metallic glasses
  469. Coercivity of Sm(Co0.9Cu0.1)4.8 melt-spun ribbons
  470. Fabrication and Characterization of Co-Ferrite Thin Films for a Ferromagnetic Barrier in a Spin-Filtering Device Operating at Room Temperature
  471. Microstructure and spin polarization of quaternary Co2Cr1−xVxAl, Co2V1−xFexAl and Co2Cr1−xFexAl Heusler alloys
  472. Transmission electron microscopy of Co2(Cr1−xFex)Al sputtered films and their magnetic tunneling junctions
  473. Bulk mechanical alloying of Cu–Ag and Cu/Zr two-phase microstructures by accumulative roll-bonding process
  474. High spin polarization in a two phase quaternary Heusler alloy Co2MnAl1−XSnX
  475. Microstructure characterization of bulk nanocrystalline Fe–0.8C alloy produced by mechanical milling and spark plasma sintering
  476. Secondary precipitation in an Al–Mg–Si–Cu alloy
  477. Stress–strain behaviors of Ti-based bulk metallic glass and their nanostructures
  478. Structural and magnetic studies on spark plasma sintered SmCo5/Fe bulk nanocomposite magnets
  479. Structural studies of secondary crystallization products of the Fe23B6-type in a nanocrystalline FeCoB-based alloy
  480. Effects of C and Ti additions on the microstructures of Nd9Fe77B14 nanocomposite magnets
  481. Microstructures and coercivities of SmCox and Sm(Co,Cu)5 films prepared by magnetron sputtering
  482. Preface
  483. Spin polarization of Co2MnGe and Co2MnSi thin films with A2 and L21 structures
  484. Ni-W Amorphous/Nanocrystalline Duplex Composite Produced by Electrodeposition
  485. Fabrication of Bulk Metallic Glass Sheet in Cu-47 at% Zr Alloys by ARB and Heat Treatment
  486. Glass Forming Ability and Mechanical Properties of Quinary Zr-Based Bulk Metallic Glasses
  487. Structural, Magnetic and Barrier Properties for Co-Ferrite Thin Films Fabricated by Plasma Oxidization
  488. Mechanism of nanocrystalline microstructure formation in amorphousFe−Nb−Balloys
  489. Effect of Ti and C additions on the microstructure and magnetic properties of Nd6Pr1Fe80B13 melt-spun ribbons
  490. Magnetization reversal of FePt hard/soft stacked nanocomposite particle assembly
  491. Preparation of Monodisperse and Highly CoerciveL10-FePt Nanoparticles Dispersible in Nonpolar Organic Solvents
  492. Glass formation and phase separation in the Ag–Cu–Zr system
  493. Microstructure and magnetic properties of SmCo5 thin films deposited on Cu and Pt underlayers
  494. Particulate structure of FePt thin films enhanced by Au and Ag alloying
  495. Phase separation and glass-forming abilities of ternary alloys
  496. Self-assembled metallic nanoparticles for spin dependent single electron tunneling
  497. Spin polarization of Co2FeSi full-Heusler alloy and tunneling magnetoresistance of its magnetic tunneling junctions
  498. Enhanced age hardening response by the addition of Zn in Mg–Sn alloys
  499. Spin polarization of quaternary Co2Cr1−xFexAl Heusler alloys
  500. Coercivity enhancement in melt-spun SmCo5 by Sn addition
  501. Current-perpendicular-to-plane magnetoresistance in epitaxial Co2MnSi∕Cr∕Co2MnSi trilayers
  502. Effect of the substitution of Ag and Ni for Cu on the glass forming ability and plasticity of Cu60Zr30Ti10 alloy
  503. Corrigendum to “Fabrication of bulk nanocrystalline Fe–C alloys by spark plasma sintering of mechanically milled powder” [Scripta Materialia 53 (2005) 863–868]
  504. Identification of the cell boundary phase in the isothermally aged commercial Sm(Co0.725Fe0.1Cu0.12Zr0.04)7.4 sintered magnet
  505. Magnetic properties and microstructure of Fe3B/Pr2Fe14B-type nanocomposite magnets with Co and Cr additions
  506. Microstructural investigation of white etching layer on pearlite steel rail
  507. Structural evolution in the supercooled liquid of Zr36Ti24Be40 metallic glass
  508. Formation of octahedral FePt nanoparticles by alternate deposition of FePt and MgO
  509. Microstructure-magnetic properties relationships in nanocrystalline Nd-Fe-Co-Ge-B annealed ribbons
  510. Nucleation-type magnetization behavior in FePt (001) particulate films
  511. Coercivity Control of FePt Nanoparticles by Interfacial Disorder
  512. Effects of Zr and C Additions on Magnetic Properties and Microstructures of α-Fe/Nd2F14B Nanocomposite Magnets
  513. Composition and structure of Cu-based nanoicosahedral phase in Cu–Zr–Ti–Pd alloy
  514. Size effect on the ordering ofL10FePt nanoparticles
  515. Fabrication of bulk nanocrystalline Fe–C alloy by spark plasma sintering of mechanically milled powder
  516. Magnetic properties and microstructure of the granular films processed by annealing FePt-based multilayers
  517. Corrigendum to “Chemistry of nanoscale precipitates in Mg–2.1Gd–0.6Y–0.2Zr (at.%) alloy investigated by the atom probe technique” [Mater. Sci. Eng. A 395 (2005) 301–306]
  518. Heating rate dependence of glass transition and primary crystallization of AlGdErNi metallic glass
  519. Nanostructure analysis of friction welded Pd–Ni–P/Pd–Cu–Ni–P metallic glass interface
  520. TEM and 3DAP characterization of an age-hardened Mg–Ca–Zn alloy
  521. Nanoscale microstructure and magnetic properties of melt-spun Sm(Co0.725Fe0.1Cu0.12Zr0.04B0.015)7.4 ribbons
  522. On low-temperature ordering of FePt films
  523. Platelet microstructure and magnetic properties in rapidly solidified Sm20.8Co63.4Fe7.9Cu2.4Zr1.6B4 ribbons
  524. Self-alignment of Fe nanoparticles on a tunnel barrier
  525. Magnetic properties and microstructures of Fe–Pt thin films sputter deposited under partial nitrogen gas flow
  526. Phase separation in Cu43Zr43Al7Ag7 bulk metallic glass
  527. Domain structures and magnetic ice-order in NiFe nano-network with honeycomb structure
  528. Nanoconstricted structure for current-confined path in current-perpendicular-to-plane spin valves with high magnetoresistance
  529. Enhancement of glass forming ability and plasticity by addition of Nb in Cu–Ti–Zr–Ni–Si bulk metallic glasses
  530. Origin of the magnetic anisotropy induced by stress annealing in Fe-based nanocrystalline alloy
  531. Early crystallization stages in a Zr–Cu–Ni–Al–Ti metallic glass
  532. Hardening and microstructural evolution in A533B steels under high-dose electron irradiation
  533. Investigation on structure-magnetic property correlation in melt-spun Sm(Co0.56Fe0.31Cu0.04Zr0.05B0.04)z ribbons
  534. Mechanically milled and spark plasma sintered FePt-based bulk magnets with high coercivity
  535. Sm(Co,Cu)5∕Fe exchange spring multilayer films with high energy product
  536. Chemistry of nanoscale precipitates in Mg–2.1Gd–0.6Y–0.2Zr (at.%) alloy investigated by the atom probe technique
  537. Microstructural evolution in 13Cr–8Ni–2.5Mo–2Al martensitic precipitation-hardened stainless steel
  538. Characterization of nanocrystalline ferrite produced by mechanical milling of pearlitic steel
  539. Microstructural evolution and the magnetic properties of melt-spun Sm–Co–Cu–B and Sm–Co–Fe–Cu–B ribbons
  540. Study on the Mechanical Relaxations of a Zr36Ti24Be40Amorphous Alloy by Time–Temperature Superposition Principle
  541. Assembly of FePt L10 nanoparticles grown on MgO(110) with self-organized groove structure
  542. Selective electrochemical dissolution in two-phase La?Zr?Al?Cu?Ni metallic glass
  543. Focused ion beam fabrication of field-ion microscope specimens from mechanically milled pearlitic steel powder
  544. Coercivity exceeding 100kOe in epitaxially grown FePt sputtered films
  545. Nanocrystallization of Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 metallic glass
  546. The effect of Cu on mechanical and precipitation properties of Al–Zn–Mg alloys
  547. Rapidly solidified (FePt)70P30 alloy with high coercivity
  548. Influence of the buffer layers on magnetic properties of FePt (001) films sputter-deposited at reduced temperature
  549. APFIM/TEM/SAXS studies of early stage crystallization of a Zr52.5Cu17.9Ni14.6Al10Ti5 metallic glass
  550. Effects of Zr and C additions on the magnetic properties and structures of melt-spun Fe83Nd10B7-based nanocomposite magnets
  551. Magnetic properties of nanocrystalline Fe–Co–Cu–M–Si–B alloys (M: Nb, Zr)
  552. Microstructure and magnetic properties of FePt and Fe/FePt polycrystalline films with high coercivity
  553. Optimum Compositions for the Low-Temperature Fabrication of Highly Ordered FePt
  554. Microstructural characterization of α-Fe/Sm–Fe–N nanocomposite hard magnets
  555. Fabrication of L10 ordered FePt thin films with a canted easy magnetization axis on MgO (1 1 0) substrate
  556. In situ formed two-phase metallic glass with surface fractal microstructure
  557. Microstructure and magnetic properties of melt-spun Sm(Co0.58Fe0.31Cu0.04Zr0.05B0.02)z ribbons
  558. Spin-dependent single-electron-tunneling effects in epitaxial Fe nanoparticles
  559. Coincidence Doppler broadening and 3DAP study of the pre-precipitation stage of an Al–Li–Cu–Mg–Ag alloy
  560. Microstructure evolution upon devitrification and crystallization kinetics of Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 melt-spun glassy ribbon
  561. On the criteria for the formation of nanoquasicrystalline phase
  562. Size dependence of ordering in FePt nanoparticles
  563. The microstructure of sintered Sm(Co0.72Fe0.20Cu0.055Zr0.025)7.5 permanent magnet studied by atom probe
  564. Interfacial disorder in the L10 FePt particles capped with amorphous Al2O3
  565. Embedded Ultrafine Clusters Investigated by Coincidence Doppler Broadening Spectroscopy
  566. Factors Controlling Irradiation Hardening of Iron-Copper Model Alloy
  567. Irradiation-Induced Defects and Cu Precipitates in Ternary Fe-Based Model Alloys for Nuclear Reactor Pressure Vessel Steels Studied by Positron Annihilation and 3D Atom Probe
  568. Microstructure and magnetic properties of FePt thin films epitaxially grown on MgO (001) substrates
  569. Direct evidence for structural origin of stress-induced magnetic anisotropy in Fe–Si–B–Nb–Cu nanocrystalline alloys
  570. Crystallization of Ti36Zr24Be40 metallic glass
  571. Corrigendum to “Crystallization of Zr36Ti24Be40 metallic glass” [Scripta Materialia 49 (2003)]
  572. High coercivity and magnetic domain observation in epitaxially grown particulate FePt thin films
  573. Microstructural control of Nb addition in nanocrystalline hard magnets with different Nd content
  574. Microstructure of soft magnetic FeCo–O(–Zr) films with high saturation magnetization
  575. Alloying of immiscible phases in wire-drawn Cu–Ag filamentary composites
  576. Optimization of the microstructure and properties of Co-substituted Fe–Si–B–Nb–Cu nanocrystalline soft magnetic alloys
  577. Ordering process of sputtered FePt films
  578. Size effect on the ordering of FePt granular films
  579. L10 ordering of off-stoichiometric FePt (001) thin films at reduced temperature
  580. Annealing effect on the soft magnetic properties of high moment FeCo–O thin films
  581. Atom probe characterization of plate-like precipitates in a Mg–RE–Zn–Zr casting alloy
  582. Enhanced magnetic properties of Nd–Fe–B thin films crystallized by heat treatment
  583. Magnetic properties of nanocrystalline FeMCuNbSiB alloys (M: Co, Ni)
  584. Preface
  585. Structure and magnetic properties of high coercive NdFeB films with a perpendicular anisotropy
  586. FeCo–Zr–O nanogranular soft-magnetic thin films with a high magnetic flux density
  587. Age Hardening of Ultrafine Grained Al-Ti-Cr Alloys Fabricated by Continuous Electron Beam Evaporation
  588. Fabrication and Characteristics of Ordered Ni Nanostructures on Glass by Anodization and Direct Current Electrodeposition
  589. Nanocrystallization of Pd74Si18Au8 metallic glass
  590. Local chemistry of a nanocrystalline high-strength Mg 97 Y 2 Zn 1 alloy
  591. Preparation and magnetic properties of highly coercive FePt films
  592. Effects of V and Si additions on the coercivity and microstructure of nanocomposite Fe3B/Nd2Fe14B magnets
  593. The decomposed γ-phase microstructure in a Mn–Cu–Ni–Fe alloy studied by HRTEM and 3D atom probe
  594. Effect of Cu on the structure and magnetic properties of FePt sputtered film
  595. Microstructure and magnetic properties of microalloyed α-Fe/Nd2Fe14B nanocomposites
  596. Effect of Co or Ge doping on the intergranular magnetic coupling in nanocrystalline Fe[sub 89]Zr[sub 7]B[sub 3]Cu[sub 1]
  597. Magnetic properties and microstructures of α-Fe/Nd[sub 2]Fe[sub 14]B nanocomposite microalloyed with Zr
  598. Nanoscale microstructural analysis of metallic materials by atom probe field ion microscopy
  599. Microstructure and properties of nanocrystalline Fe–Zr–Nb–B soft magnetic alloys with low magnetostriction
  600. Nanoquasicrystalline phase formation in binary Zr–Pd and Zr–Pt alloys
  601. Overlayer-induced anisotropic alignment of Nd2Fe14B nanograins
  602. Cementite decomposition in heavily drawn pearlite steel wire
  603. β-FeSi2Single Crystals Grown from Solution
  604. Role of Ag and Mg on precipitation of T1 phase in an Al-Cu-Li-Mg-Ag alloy
  605. The effect of Cu additions on the precipitation kinetics in an Al-Mg-Si alloy with excess Si
  606. Microstructure of two-phase Al–1.7 at% Cu alloy deformed by equal-channel angular pressing
  607. The effects of a trace addition of silver upon elevated temperature ageing of an Al–Zn–Mg alloy
  608. Small-angle neutron scattering and differential scanning calorimetry studies on the copper clustering stage of Fe–Si–B–Nb–Cu nanocrystalline alloys
  609. Nanoquasicrystallization of binary Zr–Pd metallic glasses
  610. The combined effect of molybdenum and nitrogen on the fatigued microstructure of 316 type austenitic stainless steel
  611. Pre-precipitate clusters and precipitation processes in Al–Mg–Si alloys
  612. Cu clustering and Si partitioning in the early crystallization stage of an Fe73.5Si13.5B9Nb3Cu1 amorphous alloy
  613. Microstructural evolution in a 17-4 PH stainless steel after aging at 400 °C
  614. Microstructural Evolution in an Al-1.7 at%Cu Alloy Deformed by Equal-Channel Angular Pressing
  615. Microstructure of FePt/Pt magneticthin films with high perpendicular coercivity
  616. Partitioning of Ga and Co atoms in a Fe3B/Nd2Fe14B nanocomposite magnet
  617. Nanoscale Microstructural Analyses by Atom Probe Field Ion Microscopy
  618. Microstructure of Co–Al–O granular thin films
  619. APFIM and TEM studies of drawn pearlitic wire
  620. Cluster hardening in an aged Al-Cu-Mg alloy
  621. Al partitioning in MA 956, an ODS ferritic stainless steel
  622. Three‐dimensional atom probe analysis of Co–Cr–Ta thin film
  623. Partitioning of Si in a Fe87Zr7Si4B2 nanocrystalline soft magnetic alloy
  624. Chemical compositions of ultrafine lamellae in the water-quenched Ti-48Al alloy
  625. Clustering of Cu prior to the crystallization reaction in an Fe-Zr-B-Cu amorphous alloy
  626. Nanocrystalline structural evolution in Fe90Zr7B3 soft magnetic material