Contact

All Stories

  1. Effect of lattice defects on hydrogen storage properties of HfNbTiZr medium entropy alloy

    Article • International Journal of Hydrogen Energy, August 2025, Elsevier

    Dr. Nobuhiro Tsuji

  2. Extraordinary hardening-by-annealing in bulk ultrafine grained magnesium with ultra-low yttrium addition

    Article • Acta Materialia, July 2025, Elsevier

    Dr. Nobuhiro Tsuji

  3. Grain size effects on strain localization and fracture behavior in ferrite–martensite dual-phase steels characterized by digital image correlation analysis

    Article • Journal of Materials Research and Technology, July 2025, Elsevier

    Dr. Nobuhiro Tsuji

  4. Grain refinement of dual phase steel maximizes deformation ability of martensite, leading to simultaneous enhancement of strength and ductility

    Article • Acta Materialia, June 2025, Elsevier

    Dr. Nobuhiro Tsuji

  5. The role of layer strength ratio in enhancing strain hardening and achieving strength-ductility synergy in heterostructured materials

    Article • Acta Materialia, May 2025, Elsevier

    Dr. Nobuhiro Tsuji

  6. Unusual deformation behavior and the consequent emergence of Type C serrations in Fe-1.6Mn-2Ni-1.4Si-0.4C steels

    Article • Scripta Materialia, April 2025, Elsevier

    Dr. Nobuhiro Tsuji

  7. Mechanistic origin of grain size and oxygen interstitial effects on strain-induced α” martensitic transformation in Ti-12Mo alloy

    Article • Communications Materials, March 2025, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  8. Characteristic dislocation slip behavior in polycrystalline HfNbTiZr refractory medium entropy alloy

    Article • Journal of Material Science and Technology, March 2025, Elsevier

    Dr. Nobuhiro Tsuji

  9. Electroplating of Wear‐ and Corrosion‐Resistant CrCoNi Medium‐Entropy Alloys beyond Hard Chromium Coatings

    Article • Advanced Functional Materials, January 2025, Wiley

    Dr. Nobuhiro Tsuji

  10. Quantitative evaluation of local strain distribution induced by deformation twins and triggering effect of deformation twinning on neighboring grains in polycrystalline AZ31 magnesium alloys

    Article • Scripta Materialia, January 2025, Elsevier

    Dr. Nobuhiro Tsuji

  11. Quantitative characterization of local deformation-fracture behavior in ferrite-martensite dual-phase steels with different martensite distributions

    Article • Materials Science and Engineering A, December 2024, Elsevier

    Dr. Nobuhiro Tsuji

  12. Effect of carbon segregation at prior austenite grain boundary on hydrogen-related crack propagation behavior in 3Mn-0.2C martensitic steels

    Article • Acta Materialia, November 2024, Elsevier

    Dr. Nobuhiro Tsuji

  13. Effect of martensite hardness on mechanical properties and stress/strain-partitioning behavior in ferrite + martensite dual-phase steels

    Article • Materials Science and Engineering A, November 2024, Elsevier

    Dr. Nobuhiro Tsuji

  14. Making stress visible: A method to quantify local stress distribution in metals using digital image correlation method

    Article • Scripta Materialia, November 2024, Elsevier

    Dr. Nobuhiro Tsuji

  15. Real-time Observation of Stress-strain Behavior beyond Necking in Martensitic Steel by <i>in-situ</i> Synchrotron X-ray Diffraction

    Article • ISIJ International, October 2024, Iron and Steel Institute of Japan

    Dr. Nobuhiro Tsuji

  16. Martensitic transformation-governed Lüders deformation enables large ductility and late-stage strain hardening in ultrafine-grained austenitic stainless steel at low temperatures

    Article • Acta Materialia, October 2024, Elsevier

    Dr. Nobuhiro Tsuji

  17. Origin of Serrated Markings on the Hydrogen Related Quasi-cleavage Fracture in Low-carbon Steel with Ferrite Microstructure

    Article • Tetsu-to-Hagane, September 2024, Iron and Steel Institute of Japan

    Dr. Nobuhiro Tsuji

  18. Strain localization behavior in a polycrystalline magnesium alloy with de-twinning

    Article • Scripta Materialia, September 2024, Elsevier

    Dr. Nobuhiro Tsuji

  19. Mechanism of DSA effect correlating to the macroscopic PLC banding in high-Mn austenitic steel

    Article • Scripta Materialia, August 2024, Elsevier

    Dr. Nobuhiro Tsuji

  20. Superior strength-ductility combination resulted from hetero-zone boundary affected region in Cu-Fe layered material

    Article • Journal of Material Science and Technology, May 2024, Elsevier

    Dr. Nobuhiro Tsuji

  21. Direct observations of dynamic and reverse transformation of Ti-6Al-4V alloy and pure titanium

    Article • Acta Materialia, April 2024, Elsevier

    Dr. Nobuhiro Tsuji

  22. In situ neutron diffraction revealing the achievement of excellent combination of strength and ductility in metastable austenitic steel by grain refinement

    Article • Journal of Material Science and Technology, March 2024, Elsevier

    Dr. Nobuhiro Tsuji

  23. Mechanism of simultaneous increase of strength and ductility with grain refinement in Si-added high-Mn austenitic steel

    Article • Materials Science and Engineering A, March 2024, Elsevier

    Dr. Nobuhiro Tsuji

  24. Grain-level mechanism of plastic deformation in harmonic structure materials revealed by high resolution X-ray diffraction

    Article • Acta Materialia, February 2024, Elsevier

    Dr. Nobuhiro Tsuji

  25. Highly deformable Laves phase in a high entropy alloy

    Article • Scripta Materialia, February 2024, Elsevier

    Dr. Nobuhiro Tsuji

  26. Quantitatively evaluating the huge Lüders band deformation in an ultrafine grain stainless steel by combining in situ neutron diffraction and digital image correlation analysis

    Article • Scripta Materialia, October 2023, Elsevier

    Dr. Nobuhiro Tsuji

  27. Characteristics and formation mechanism of serrated markings on the hydrogen-related quasi-cleavage fracture in as quenched low-carbon martensitic steel

    Article • Scripta Materialia, September 2023, Elsevier

    Dr. Nobuhiro Tsuji

  28. Oxygen interstitials make metastable β titanium alloys strong and ductile

    Article • Acta Materialia, September 2023, Elsevier

    Dr. Nobuhiro Tsuji

  29. Quantitatively evaluating respective contribution of austenite and deformation-induced martensite to flow stress, plastic strain, and strain hardening rate in tensile deformed TRIP steel

    Article • Acta Materialia, September 2023, Elsevier

    Dr. Nobuhiro Tsuji

  30. Characteristic strengthening mechanisms in body-centered cubic refractory high/medium entropy alloys

    Article • Scripta Materialia, July 2023, Elsevier

    Dr. Nobuhiro Tsuji

  31. New insights into the colony refinement mechanism by solute boron atoms in Ti-6Al-4V alloy

    Article • Scripta Materialia, June 2023, Elsevier

    Dr. Nobuhiro Tsuji

  32. Unique microstructure formations during low-temperature partitioning after intercritical annealing in low alloy multi-phase TRIP steel and their mechanical behavior clarified by in-situ synchrotron X-Ray diffraction

    Article • Materials Science and Engineering A, June 2023, Elsevier

    Dr. Nobuhiro Tsuji

  33. Yield and flow properties of ultra-fine, fine, and coarse grain microstructures of FeCoNi equiatomic alloy at ambient and cryogenic temperatures

    Article • Scripta Materialia, June 2023, Elsevier

    Dr. Nobuhiro Tsuji

  34. Lattice parameters of austenite and martensite during transformation for Fe–18Ni alloy investigated through in-situ neutron diffraction

    Article • Acta Materialia, May 2023, Elsevier

    Dr. Nobuhiro Tsuji

  35. Role of surrounding phases on deformation-induced martensitic transformation of retained austenite in multi-phase TRIP steel

    Article • Materials Science and Engineering A, May 2023, Elsevier

    Dr. Nobuhiro Tsuji

  36. Compressive deformation behavior of AZ31 alloy at 21K: an in-situ neutron diffraction study

    Article • Scripta Materialia, March 2023, Elsevier

    Dr. Nobuhiro Tsuji

  37. Stress partitioning in harmonic structure materials at the early stages of tensile loading studied in situ by synchrotron X-ray diffraction

    Article • Scripta Materialia, March 2023, Elsevier

    Dr. Nobuhiro Tsuji

  38. Improvement of resistance against hydrogen embrittlement by controlling carbon segregation at prior austenite grain boundary in 3Mn-0.2C martensitic steels

    Article • Scripta Materialia, February 2023, Elsevier

    Kazuhiro Hono, Dr. Nobuhiro Tsuji

  39. Global understanding of deformation behavior in CoCrFeMnNi high entropy alloy under high-strain torsion deformation at a wide range of elevated temperatures

    Article • Acta Materialia, January 2023, Elsevier

    Dr. Nobuhiro Tsuji

  40. Microstructural factors dictating the initial plastic deformation behavior of an ultrafine-grained Fe–22Mn-0.6C TWIP steel

    Article • Materials Science and Engineering A, January 2023, Elsevier

    Dr. Nobuhiro Tsuji

  41. Unexpected dynamic transformation from α phase to β phase in zirconium alloy revealed by in-situ neutron diffraction during high temperature deformation

    Article • Acta Materialia, January 2023, Elsevier

    Dr. Nobuhiro Tsuji

  42. Discontinuous yielding phenomena triggered by Zn addition in low-alloyed Mg-Al-Ca-Mn alloys

    Article • Scripta Materialia, December 2022, Elsevier

    Kazuhiro Hono, Dr. Nobuhiro Tsuji

  43. In-situ observation of twinning and detwinning in AZ31 alloy

    Article • Journal of Magnesium and Alloys, December 2022, Elsevier

    Dr. Nobuhiro Tsuji

  44. Ultrahigh yield strength and large uniform elongation achieved in ultrafine-grained titanium containing nitrogen

    Article • Acta Materialia, November 2022, Elsevier

    Dr. Nobuhiro Tsuji

  45. Hydrogen-related Fatigue Fracture under Various Test Frequencies in Low-carbon Martensitic Steel

    Article • ISIJ International, October 2022, Iron and Steel Institute of Japan

    Dr. Nobuhiro Tsuji

  46. Origin of Serrated Markings on the Hydrogen Related Quasi-cleavage Fracture in Low-carbon Steel with Ferrite Microstructure

    Article • ISIJ International, October 2022, Iron and Steel Institute of Japan

    Dr. Nobuhiro Tsuji

  47. Preface to the Special Issue on “Strength, Plasticity, and Fracture in Steels: Towards Quantitative Bridging of Experiment and Simulation”

    Article • ISIJ International, October 2022, Iron and Steel Institute of Japan

    Dr. Nobuhiro Tsuji

  48. In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

    Article • Scripta Materialia, July 2022, Elsevier

    Dr. Nobuhiro Tsuji

  49. Mechanisms of remarkable wear reduction and evolutions of subsurface microstructure and nano-mechanical properties during dry sliding of nano-grained Ti6Al4V alloy: A comparative study

    Article • Tribology International, May 2022, Elsevier

    Dr. Nobuhiro Tsuji

  50. Significant Bauschinger effect and back stress strengthening in an ultrafine grained pure aluminum fabricated by severe plastic deformation process

    Article • Scripta Materialia, April 2022, Elsevier

    Dr. Nobuhiro Tsuji

  51. Hydrogen-Related Fracture Behavior under Constant Loading Tensile Test in As-Quenched Low-Carbon Martensitic Steel

    Article • Metals, March 2022, MDPI AG

    Dr. Nobuhiro Tsuji

  52. Effective grain size refinement of an Fe-24Ni-0.3C metastable austenitic steel by a modified two-step cold rolling and annealing process utilizing the deformation-induced martensitic transformation and its reverse transformation

    Article • Journal of Materials Research and Technology, March 2022, Elsevier

    Dr. Nobuhiro Tsuji

  53. Achieving excellent mechanical properties in type 316 stainless steel by tailoring grain size in homogeneously recovered or recrystallized nanostructures

    Article • Acta Materialia, March 2022, Elsevier

    Dr. Nobuhiro Tsuji

  54. Nanomaterials by severe plastic deformation: review of historical developments and recent advances

    Article • Materials Research Letters, February 2022, Taylor & Francis

    Dr. Nobuhiro Tsuji

  55. Effect of hydrogen on evolution of deformation microstructure in low-carbon steel with ferrite microstructure

    Article • Acta Materialia, February 2022, Elsevier

    Dr. Nobuhiro Tsuji

  56. Direct observation of grain boundary formation in bcc iron through TEM in situ compression test

    Article • Scripta Materialia, January 2022, Elsevier

    Dr. Nobuhiro Tsuji

  57. Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2.1 eutectic high-entropy alloy

    Article • Materials Science and Engineering A, January 2022, Elsevier

    Dr. Nobuhiro Tsuji

  58. Hydrogen embrittlement behaviors at different deformation temperatures in as-quenched low-carbon martensitic steel

    Article • International Journal of Hydrogen Energy, January 2022, Elsevier

    Dr. Nobuhiro Tsuji

  59. Advanced Thermomechanical Processing of Steels

    Article • January 2022, Elsevier

    Dr. Nobuhiro Tsuji

  60. The Plaston Concept

    Article • January 2022, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  61. Effect of high pressure torsion process on the microhardness, microstructure and tribological property of Ti6Al4V alloy

    Article • Journal of Material Science and Technology, December 2021, Elsevier

    Dr. Nobuhiro Tsuji

  62. Editorial: New Developments and Challenges in Advanced High-Strength Steels

    Article • Frontiers in Materials, November 2021, Frontiers

    Dr. Nobuhiro Tsuji

  63. Characteristics of hydrogen-related fatigue fracture in 2Mn-0.1C martensitic steel

    Article • International Journal of Hydrogen Energy, October 2021, Elsevier

    Dr. Nobuhiro Tsuji

  64. Investigating the dislocation reactions on Σ3{111} twin boundary during deformation twin nucleation process in an ultrafine-grained high-manganese steel

    Article • Scientific Reports, September 2021, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  65. Grain size altering yielding mechanisms in ultrafine grained high-Mn austenitic steel: Advanced TEM investigations

    Article • Journal of Material Science and Technology, September 2021, Elsevier

    Dr. Nobuhiro Tsuji

  66. Direct observation of local chemical ordering in a few nanometer range in CoCrNi medium-entropy alloy by atom probe tomography and its impact on mechanical properties

    Article • Physical Review Materials, August 2021, American Physical Society (APS)

    Dr. Nobuhiro Tsuji

  67. Unique transition of yielding mechanism and unexpected activation of deformation twinning in ultrafine grained Fe-31Mn-3Al-3Si alloy

    Article • Scientific Reports, August 2021, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  68. A unique three-stage dependence of yielding behavior and strain-hardening ability in Ti-10V-2Fe-3Al alloy on phase fraction

    Article • Materials Science and Engineering A, July 2021, Elsevier

    Dr. Nobuhiro Tsuji

  69. Microstructure, texture and mechanical properties of sandwiched ARB6/2/6 2N Al fabricated by accumulative roll bonding

    Article • Materials Science and Engineering A, June 2021, Elsevier

    Dr. Nobuhiro Tsuji

  70. Effects of local stress, strain, and hydrogen content on hydrogen-related fracture behavior in low-carbon martensitic steel

    Article • Acta Materialia, May 2021, Elsevier

    Dr. Nobuhiro Tsuji

  71. A correlation between grain boundary character and deformation twin nucleation mechanism in coarse-grained high-Mn austenitic steel

    Article • Scientific Reports, April 2021, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  72. Corrigendum to ‘Strategy for Managing Both High Strength and Large Ductility in Structural Materials - sequential nucleation of different deformation modes based on a concept of plaston’ [Scripta Materialia 181 (2020) 35-42/ SMM 13102]

    Article • Scripta Materialia, April 2021, Elsevier

    Dr. Nobuhiro Tsuji

  73. Deformation mechanism of bimodal microstructure in Ti-6Al-4V alloy: The effects of intercritical annealing temperature and constituent hardness

    Article • Journal of Material Science and Technology, April 2021, Elsevier

    Dr. Nobuhiro Tsuji

  74. Mechanical response of dislocation interaction with grain boundary in ultrafine-grained interstitial-free steel

    Article • Acta Materialia, March 2021, Elsevier

    Dr. Nobuhiro Tsuji

  75. Mesoscopic nature of serration behavior in high-Mn austenitic steel

    Article • Acta Materialia, February 2021, Elsevier

    Dr. Nobuhiro Tsuji

  76. Crystallographic analysis of fatigue fracture initiation in 8Ni-0.1C martensitic steel

    Article • International Journal of Fatigue, February 2021, Elsevier

    Dr. Nobuhiro Tsuji

  77. Achieving large super-elasticity through changing relative easiness of deformation modes in Ti-Nb-Mo alloy by ultra-grain refinement

    Article • Materials Research Letters, January 2021, Taylor & Francis

    Dr. Nobuhiro Tsuji

  78. Effect of Hydrogen on Evolution of Deformation Microstructure in Low-Carbon Steel with Ferrite Microstructure

    Article • SSRN Electronic Journal, January 2021, Elsevier

    Dr. Nobuhiro Tsuji

  79. Tensile Deformation of Ultrafine-Grained Fe-Mn-Al-Ni-C Alloy Studied by In Situ Synchrotron Radiation X-ray Diffraction

    Article • Crystals, December 2020, MDPI AG

    Dr. Nobuhiro Tsuji

  80. Challenging Ultra Grain Refinement of Ferrite in Low-C Steel Only by Heat Treatment

    Article • Frontiers in Materials, November 2020, Frontiers

    Dr. Nobuhiro Tsuji

  81. Editorial: Trends and Advances in Nano-Structured Materials With Novel Structures and Properties

    Article • Frontiers in Materials, October 2020, Frontiers

    Dr. Nobuhiro Tsuji

  82. Transition of dominant deformation mode in bulk polycrystalline pure Mg by ultra-grain refinement down to sub-micrometer

    Article • Acta Materialia, October 2020, Elsevier

    Dr. Nobuhiro Tsuji

  83. Enhanced mechanical properties in β-Ti alloy aged from recrystallized ultrafine β grains

    Article • Materials & Design, October 2020, Elsevier

    Dr. Nobuhiro Tsuji

  84. Significant transitions of mechanical properties by changing temperature in Cu-Al alloys with heterogeneous microstructures

    Article • Materials Characterization, October 2020, Elsevier

    Dr. Nobuhiro Tsuji

  85. Heterostructured materials: superior properties from hetero-zone interaction

    Article • Materials Research Letters, September 2020, Taylor & Francis

    Dr. Nobuhiro Tsuji

  86. A Concentrated AlCl3–Diglyme Electrolyte for Hard and Corrosion-Resistant Aluminum Electrodeposits

    Article • ACS Applied Materials & Interfaces, September 2020, American Chemical Society (ACS)

    Dr. Nobuhiro Tsuji, Atsushi Kitada

  87. Heterogeneity and Homogeneity in 2/4 N Multilayered Al Fabricated by Accumulative Roll Bonding and Annealing

    Article • Journal of Materials Engineering and Performance, September 2020, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  88. Plastic strain-induced sequential martensitic transformation

    Article • Scripta Materialia, August 2020, Elsevier

    Dr. Nobuhiro Tsuji

  89. Deformation behavior study in a model dual phase system of copper–martensitic steel using in-situ synchrotron X-ray diffraction

    Article • IOP Conference Series Materials Science and Engineering, July 2020, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  90. Grain refinement mechanisms in BCC ferritic steel and FCC austenitic steel highly deformed under different temperatures and strain rates

    Article • Materials Science and Engineering A, July 2020, Elsevier

    Dr. Nobuhiro Tsuji

  91. Two-stage Hall-Petch relationship in Cu with recrystallized structure

    Article • Journal of Material Science and Technology, July 2020, Elsevier

    Dr. Nobuhiro Tsuji

  92. Yield strength and misfit volumes of NiCoCr and implications for short-range-order

    Article • Nature Communications, May 2020, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  93. Strategy for managing both high strength and large ductility in structural materials–sequential nucleation of different deformation modes based on a concept of plaston

    Article • Scripta Materialia, May 2020, Elsevier

    Dr. Nobuhiro Tsuji

  94. Influence of Fe addition in CP titanium on phase transformation, microstructure and mechanical properties during high pressure torsion

    Article • Journal of Alloys and Compounds, May 2020, Elsevier

    Dr. Nobuhiro Tsuji

  95. Investigation on the Microstructure and Mechanical Properties of Ti-1.0Fe Alloy with Equiaxed α + β Microstructures

    Article • Metallurgical and Materials Transactions A, April 2020, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  96. Microstructural evolution and mechanical properties of nanostructured Cu/Ni multilayer fabricated by accumulative roll bonding

    Article • Journal of Alloys and Compounds, April 2020, Elsevier

    Dr. Nobuhiro Tsuji

  97. Effect of Cobalt-Content on Mechanical Properties of Non-Equiatomic Co–Cr–Ni Medium Entropy Alloys

    Article • MATERIALS TRANSACTIONS, April 2020, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  98. Effect of Elemental Combination on Microstructure and Mechanical Properties of Quaternary Refractory Medium Entropy Alloys

    Article • MATERIALS TRANSACTIONS, April 2020, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  99. Termination of local strain concentration led to better tensile ductility in multilayered 2N/4N Al sheet

    Article • Materials Science and Engineering A, April 2020, Elsevier

    Dr. Nobuhiro Tsuji

  100. Ultra-Grain Refinement of High Entropy Alloys

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, March 2020, Japan Society of Powder and Powder Metallurgy

    Dr. Nobuhiro Tsuji

  101. Effect of initial dislocation density on hydrogen accumulation behavior in martensitic steel

    Article • Scripta Materialia, March 2020, Elsevier

    Dr. Nobuhiro Tsuji

  102. Strain-dependence of deformation microstructures in ultra-low-C IF steel deformed to high strains by torsion at elevated temperatures

    Article • Nano Materials Science, March 2020, Elsevier

    Dr. Nobuhiro Tsuji

  103. Unique high-temperature deformation dominated by grain boundary sliding in heterogeneous necklace structure formed by dynamic recrystallization in HfNbTaTiZr BCC refractory high entropy alloy

    Article • Acta Materialia, January 2020, Elsevier

    Dr. Nobuhiro Tsuji

  104. Grain Size Altering Yielding Mechanisms in Ultrafine Grained High-Mn Austenitic Steel: Advanced TEM Investigations

    Article • SSRN Electronic Journal, January 2020, Elsevier

    Dr. Nobuhiro Tsuji

  105. Achieving bi-lamellar microstructure with both high tensile strength and large ductility in Ti–6Al–4V alloy by novel thermomechanical processing

    Article • Materialia, December 2019, Elsevier

    Dr. Nobuhiro Tsuji

  106. Investigation on the hot deformation behaviors and globularization mechanisms of lamellar Ti–6Al–4V alloy within a wide range of deformation temperatures

    Article • Materialia, December 2019, Elsevier

    Dr. Nobuhiro Tsuji

  107. Ultra-strong, ductile and thermally stable ultrafine grained 5083 Al alloy fabricated by high pressure torsion using pre-sintered powders

    Article • Materialia, December 2019, Elsevier

    Dr. Nobuhiro Tsuji

  108. Understanding on Peculiar Mechanical Properties of Ultrafine Grained Aluminum

    Article • Journal of Japan Institute of Light Metals, November 2019, Japan Institute of Light Metals

    Dr. Nobuhiro Tsuji

  109. Mechanical and microstructural analysis on hydrogen-related fracture in a martensitic steel

    Article • International Journal of Hydrogen Energy, November 2019, Elsevier

    Dr. Nobuhiro Tsuji

  110. On the strain hardening abilities of α+β titanium alloys: The roles of strain partitioning and interface length density

    Article • Journal of Alloys and Compounds, November 2019, Elsevier

    Dr. Nobuhiro Tsuji

  111. Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures

    Article • Scripta Materialia, November 2019, Elsevier

    Dr. Nobuhiro Tsuji

  112. Synergistic effect by Al addition in improving mechanical performance of CoCrNi medium-entropy alloy

    Article • Journal of Alloys and Compounds, September 2019, Elsevier

    Dr. Nobuhiro Tsuji

  113. Engineering heterogeneous microstructure by severe warm-rolling for enhancing strength-ductility synergy in eutectic high entropy alloys

    Article • Materials Science and Engineering A, September 2019, Elsevier

    Dr. Nobuhiro Tsuji

  114. Change of Deformation Mechanisms Leading to High Strength and Large Ductility in Mg-Zn-Zr-Ca Alloy with Fully Recrystallized Ultrafine Grained Microstructures

    Article • Scientific Reports, August 2019, Springer Science + Business Media

    Dr. Nobuhiro Tsuji, Kazuhiro Hono

  115. Nanostructuring with Structural-Compositional Dual Heterogeneities Enhances Strength-Ductility Synergy in Eutectic High Entropy Alloy

    Article • Scientific Reports, August 2019, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  116. Microstructure Evolution and Phase Transformation of Ti‐1.0 wt%Fe Alloy with an Equiaxed α + β Initial Microstructure during High‐Pressure Torsion and Subsequent Annealing

    Article • Advanced Engineering Materials, August 2019, Wiley

    Dr. Nobuhiro Tsuji

  117. Bi-lamellar microstructure in Ti–6Al–4V: Microstructure evolution and mechanical properties

    Article • Materials Science and Engineering A, August 2019, Elsevier

    Dr. Nobuhiro Tsuji

  118. Deformation microstructures and strength of face-centered cubic high/medium entropy alloys

    Article • IOP Conference Series Materials Science and Engineering, August 2019, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  119. Formation Mechanism of Ultrafine Grained Microstructures: Various Possibilities for Fabricating Bulk Nanostructured Metals and Alloys

    Article • MATERIALS TRANSACTIONS, August 2019, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  120. In-situ neutron diffraction study on the deformation of a TRIP-assisted multi-phase steel composed of ferrite, austenite and martensite

    Article • IOP Conference Series Materials Science and Engineering, August 2019, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  121. Linking local and heterogeneous deformation behavior to global deformation of materials by in-situ experimental techniques

    Article • IOP Conference Series Materials Science and Engineering, August 2019, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  122. Effect of Hydrogen on the Substructure of Lenticular Martensite in Fe-31Ni Alloy

    Article • Metallurgical and Materials Transactions A, June 2019, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  123. Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys

    Article • Acta Materialia, June 2019, Elsevier

    Dr. Nobuhiro Tsuji

  124. Unique deformation behavior and microstructure evolution in high temperature processing of HfNbTaTiZr refractory high entropy alloy

    Article • Acta Materialia, June 2019, Elsevier

    Dr. Nobuhiro Tsuji

  125. Global view for grain refinement in ultra-low-C IF steel during high-strain deformation at various temperatures and strain rates

    Article • Materialia, June 2019, Elsevier

    Dr. Nobuhiro Tsuji

  126. Statistical representation of the microstructure and strength for a two-phase Ti–6Al–4V

    Article • Materials Science and Engineering A, June 2019, Elsevier

    Dr. Nobuhiro Tsuji

  127. Nature of dynamic ferrite transformation revealed by in-situ neutron diffraction analysis during thermomechanical processing

    Article • Scripta Materialia, May 2019, Elsevier

    Dr. Nobuhiro Tsuji

  128. Effect of aluminum addition on solid solution strengthening in CoCrNi medium-entropy alloy

    Article • Journal of Alloys and Compounds, April 2019, Elsevier

    Dr. Nobuhiro Tsuji

  129. Strength–ductility balance in an ultrafine-grained non-equiatomic Fe50(CoCrMnNi)50 medium-entropy alloy with a fully recrystallized microstructure

    Article • Journal of Alloys and Compounds, April 2019, Elsevier

    Dr. Nobuhiro Tsuji

  130. Grain refinement and age precipitation in aluminum alloys using ARB process

    Article • Journal of Japan Institute of Light Metals, March 2019, Japan Institute of Light Metals

    Dr. Nobuhiro Tsuji

  131. Effect of thermomechanical processing at α + γ two-phase temperatures on microstructure and mechanical property of 5Mn-0.1C-2Si medium-manganese steel

    Article • Materials Science and Engineering A, January 2019, Elsevier

    Dr. Nobuhiro Tsuji

  132. Achieving Bi-Lamellar Microstructure with Both High Tensile Strength and Large Ductility in Ti-6Al-4V Alloy by Novel Thermomechanical Processing

    Article • SSRN Electronic Journal, January 2019, Elsevier

    Dr. Nobuhiro Tsuji

  133. Investigation on the Hot Deformation Behaviors and Globularization Mechanisms of Lamellar Ti-6Al-4V Alloy within a Wide Range of Deformation Temperatures

    Article • SSRN Electronic Journal, January 2019, Elsevier

    Dr. Nobuhiro Tsuji

  134. Mechanism of huge Lüders-type deformation in ultrafine grained austenitic stainless steel

    Article • Scripta Materialia, January 2019, Elsevier

    Dr. Nobuhiro Tsuji

  135. Resistance to mechanically small fatigue crack growth in ultrafine grained interstitial-free steel fabricated by accumulative roll-bonding

    Article • International Journal of Fatigue, January 2019, Elsevier

    Dr. Nobuhiro Tsuji

  136. Effect of Grain Size on Mechanical Properties of Mg-0.3at.%Y Dilute Alloy

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  137. Unique Effect of Carbon Addition on Development of Deformation and Recrystallization Textures in Heavily Cold-Rolled Fe-3%Si Alloys

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  138. Microstructure Evolution and Change in Mechanical Properties of Medium Mn Steels during Thermomechanical Processing

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Dr. Nobuhiro Tsuji, FEIFEI HOU

  139. Deformation behavior of as-cast and as-extruded Mg97Zn1Y2 alloys during compression, as tracked by in situ neutron diffraction

    Article • International Journal of Plasticity, December 2018, Elsevier

    Dr. Nobuhiro Tsuji

  140. Microstructure evolution during thermomechanical processing in 3Mn-0.1C medium-Mn steel

    Article • Materials Science and Technology, November 2018, Taylor & Francis

    Dr. Nobuhiro Tsuji, FEIFEI HOU

  141. Ultrafine-grained CuAg7Zr0.05 alloy with fully recrystallized microstructure

    Article • Materialia, November 2018, Elsevier

    Dr. Nobuhiro Tsuji

  142. Deformation-assisted diffusion for the enhanced kinetics of dynamic phase transformation

    Article • Materials Research Letters, October 2018, Taylor & Francis

    Dr. Nobuhiro Tsuji

  143. Unique effect of carbon addition on development of deformation texture through changes in slip activation and twin deformation in heavily cold-rolled Fe-3% Si alloys

    Article • Acta Materialia, September 2018, Elsevier

    Dr. Nobuhiro Tsuji

  144. Characterization of cold-rolled heterogeneous microstructure formed by multimodal deformation in an Fe-Ni-Al-C alloy with lattice softening

    Article • Materials & Design, September 2018, Elsevier

    Dr. Nobuhiro Tsuji

  145. Factors determining room temperature mechanical properties of bimodal microstructures in Ti-6Al-4V alloy

    Article • Materials Science and Engineering A, July 2018, Elsevier

    Dr. Nobuhiro Tsuji

  146. Texture and Mechanical Properties of Al–Mg Alloy with Unimodal and Bimodal Grain-Structures Formed by Accumulative Roll Bonding and Annealing

    Article • MATERIALS TRANSACTIONS, July 2018, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  147. Crystallographic feature of hydrogen-related fracture in 2Mn-0.1C ferritic steel

    Article • International Journal of Hydrogen Energy, June 2018, Elsevier

    Dr. Nobuhiro Tsuji

  148. Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy

    Article • Materials Chemistry and Physics, May 2018, Elsevier

    Dr. Nobuhiro Tsuji

  149. Hot deformation behavior of CoCrFeMnNi FCC high entropy alloy

    Article • Materials Chemistry and Physics, May 2018, Elsevier

    Dr. Nobuhiro Tsuji

  150. Overcoming the strength–ductility trade-off via the formation of a thermally stable and plastically unstable austenitic phase in cold-worked steel

    Article • Materials Science and Engineering A, April 2018, Elsevier

    Dr. Nobuhiro Tsuji

  151. Dynamic Transformation Mechanism for Producing Ultrafine Grained Steels

    Article • Advanced Engineering Materials, March 2018, Wiley

    Dr. Nobuhiro Tsuji

  152. Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing

    Article • Scientific Reports, February 2018, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  153. Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes

    Article • Scripta Materialia, January 2018, Elsevier

    Dr. Nobuhiro Tsuji

  154. Ultrafine grained structure and improved mechanical properties of low temperature friction stir spot welded 6061-T6 Al alloys

    Article • Materials Characterization, January 2018, Elsevier

    Dr. Nobuhiro Tsuji

  155. Unique Deformation Behavior and Microstructure Evolution in High Temperature Processing of HfNbTaTiZr Refractory High Entropy Alloy

    Article • SSRN Electronic Journal, January 2018, Elsevier

    Dr. Nobuhiro Tsuji

  156. Hydrogen embrittlement behaviors of ultrafine-grained 22Mn–0.6C austenitic twinning induced plasticity steel

    Article • Journal of Materials Research, September 2017, Cambridge University Press

    Dr. Nobuhiro Tsuji

  157. Mechanical properties of fully martensite microstructure in Ti-6Al-4V alloy transformed from refined beta grains obtained by rapid heat treatment (RHT)

    Article • Scripta Materialia, September 2017, Elsevier

    Dr. Nobuhiro Tsuji

  158. The phase stability of equiatomic CoCrFeMnNi high-entropy alloy: Comparison between experiment and calculation results

    Article • Journal of Alloys and Compounds, September 2017, Elsevier

    Dr. Nobuhiro Tsuji

  159. On the Stability of Reversely Formed Austenite and Related Mechanism of Transformation in an Fe-Ni-Mn Martensitic Steel Aided by Electron Backscattering Diffraction and Atom Probe Tomography

    Article • Metallurgical and Materials Transactions A, August 2017, Springer Science + Business Media

    mahmoud Nili Ahmadabadi, Dr. Nobuhiro Tsuji

  160. Deformation Induced Martensitic Transformation and Its Initial Microstructure Dependence in a High Alloyed Duplex Stainless Steel

    Article • steel research international, August 2017, Wiley

    Dr. Nobuhiro Tsuji

  161. Enhanced mechanical properties in fully recrystallized ultrafine grained ZKX600 Mg alloy

    Article • IOP Conference Series Materials Science and Engineering, July 2017, Institute of Physics Publishing

    Kazuhiro Hono, Dr. Nobuhiro Tsuji

  162. Investigation of the grain size effect on mechanical properties of Ti-6Al-4V alloy with equiaxed and bimodal microstructures

    Article • IOP Conference Series Materials Science and Engineering, July 2017, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  163. Microstructures and mechanical property of a Fe-Ni-Al-C alloy containing B2 intermetallic compounds

    Article • IOP Conference Series Materials Science and Engineering, July 2017, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  164. Reason for high strength and good ductility in dual phase steels composed of soft ferrite and hard martensite

    Article • IOP Conference Series Materials Science and Engineering, July 2017, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  165. Structural refinement and property optimization in an Fe-23Cr-8.5Ni duplex stainless steel

    Article • IOP Conference Series Materials Science and Engineering, July 2017, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  166. SEM/EBSD Analysis on Globularization Behavior of Lamellar Microstructure in Ti-6Al-4V During Hot Deformation and Annealing

    Article • Metallurgical and Materials Transactions A, June 2017, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  167. Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing

    Article • Scripta Materialia, June 2017, Elsevier

    Dr. Nobuhiro Tsuji

  168. Post-uniform elongation and tensile fracture mechanisms of Fe-18Mn-0.6C-xAl twinning-induced plasticity steels

    Article • Acta Materialia, June 2017, Elsevier

    Dr. Nobuhiro Tsuji

  169. Role of Different Kinds of Boundaries Against Cleavage Crack Propagation in Low-Temperature Embrittlement of Low-Carbon Martensitic Steel

    Article • Metallurgical and Materials Transactions A, May 2017, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  170. Change of deformation mechanisms in ultrafine grained Mg-Zn-Zr-Ca alloy

    Article • IOP Conference Series Materials Science and Engineering, May 2017, Institute of Physics Publishing

    Kazuhiro Hono, Dr. Nobuhiro Tsuji

  171. Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy

    Article • Intermetallics, May 2017, Elsevier

    Dr. Nobuhiro Tsuji

  172. Characterization of microstructure and mechanical property of pure titanium with different Fe addition processed by severe plastic deformation and subsequent annealing

    Article • IOP Conference Series Materials Science and Engineering, May 2017, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  173. Effect of severe cold-rolling and annealing on microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy

    Article • IOP Conference Series Materials Science and Engineering, May 2017, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  174. Realizing Ultrafine Grained Steel by Simple Hot Deformation Using Dynamic Transformation and Subsequent Dynamic Recrystallization Mechanisms

    Article • IOP Conference Series Materials Science and Engineering, May 2017, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  175. Microstructural and crystallographic features of hydrogen-related fracture in lath martensitic steels

    Article • Materials Science and Technology, April 2017, Taylor & Francis

    Dr. Nobuhiro Tsuji

  176. Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures

    Article • Scripta Materialia, April 2017, Elsevier

    Kazuhiro Hono, Dr. Nobuhiro Tsuji

  177. A novel ultrafine-grained Fe 22Mn 0.6C TWIP steel with superior strength and ductility

    Article • Materials Characterization, April 2017, Elsevier

    Dr. Nobuhiro Tsuji

  178. Cooperative strain accommodation over grains in martensitic transformation from Fe-Ni nanocrystalline austenite

    Article • Philosophical Magazine Letters, March 2017, Taylor & Francis

    Dr. Nobuhiro Tsuji

  179. Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel

    Article • International Journal of Hydrogen Energy, February 2017, Elsevier

    Dr. Nobuhiro Tsuji

  180. Mechanism of Dynamic Formation of Ultrafine Ferrite Grains during High Temperature Processing in Steel

    Article • Advanced Engineering Materials, January 2017, Wiley

    Dr. Nobuhiro Tsuji

  181. Fracture surface topography analysis of the hydrogen-related fracture propagation process in martensitic steel

    Article • International Journal of Fracture, January 2017, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  182. Mechanical Properties and Deformation Mechanism of Mg–Y Alloy with Various Grain Sizes

    Article • January 2017, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  183. Ultimate Rolling Texture in Pure Aluminum Highly Deformed by Accumulative Roll Bonding: Taylor Orientation Formed beyond Grain Subdivision

    Article • MATERIALS TRANSACTIONS, January 2017, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  184. Combination of dynamic transformation and dynamic recrystallization for realizing ultrafine-grained steels with superior mechanical properties

    Article • Scientific Reports, December 2016, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  185. Thermomechanical Processing of Medium Manganese Steels

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  186. Mechanical Properties of Fine-Grained and Ultrafine-Grained Ti-6Al-4V with Equiaxed and Bimodal Microstructures

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  187. Fatigue properties of ARB-processed Ti sheets with crystallographic texture

    Article • International Journal of Fatigue, November 2016, Elsevier

    Dr. Nobuhiro Tsuji

  188. Microstructure and Mechanical Properties of Dissimilar Friction Stir Welding between Ultrafine Grained 1050 and 6061-T6 Aluminum Alloys

    Article • Metals, October 2016, MDPI AG

    Dr. Nobuhiro Tsuji

  189. Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing

    Article • Materials Science and Engineering A, October 2016, Elsevier

    Dr. Nobuhiro Tsuji

  190. Effect of Precipitate on Microstructure Evolution and Hardness of Al-Cu Alloy during Torsion Deformation

    Article • Materials Science Forum, September 2016, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  191. Strength and Ductility of Ultrafine Grained ZKX600 Mg Alloy

    Article • August 2016, Wiley

    Dr. Nobuhiro Tsuji

  192. Grain Refinement and Texture Evolution in Highly Deformed Ferrite During High-Temperature Torsion Deformation of if Steel

    Article • August 2016, Wiley

    Dr. Nobuhiro Tsuji

  193. Novel thermomechanical processing methods for achieving ultragrain refinement of low-carbon steel without heavy plastic deformation

    Article • Materials Research Letters, July 2016, Taylor & Francis

    Dr. Nobuhiro Tsuji

  194. Contactless electrical conductivity measurement of metallic submicron-grain material: Application to the study of aluminum with severe plastic deformation

    Article • Review of Scientific Instruments, May 2016, American Institute of Physics

    Dr. Nobuhiro Tsuji

  195. Revealing the deformation mechanisms of Cu–Al alloys with high strength and good ductility

    Article • Acta Materialia, May 2016, Elsevier

    Dr. Nobuhiro Tsuji

  196. Effect of Grain Size on Mechanical Properties of Dual Phase Steels Composed of Ferrite and Martensite

    Article • MRS Advances, February 2016, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  197. Ductility Sensitivity to Stacking Fault Energy and Grain Size in Cu–Al Alloys

    Article • Materials Research Letters, January 2016, Taylor & Francis

    Dr. Nobuhiro Tsuji

  198. Effect of Accumulative Roll Bonding (ARB) and Subsequent Aging on Microstructure and Mechanical Properties of 2024 Al Alloy

    Article • MATERIALS TRANSACTIONS, January 2016, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  199. Effect of grain refinement on hydrogen embrittlement behaviors of high-Mn TWIP steel

    Article • Materials Science and Engineering A, January 2016, Elsevier

    Dr. Nobuhiro Tsuji

  200. Grain Subdivision Mechanism Related to Partial Disclinations in Severe Plastic Deformation: A Molecular Dynamics Study

    Article • MATERIALS TRANSACTIONS, January 2016, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  201. Microstructure and Mechanical Properties of ARB Processed Aluminium with Different Purities

    Article • MATERIALS TRANSACTIONS, January 2016, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  202. Special Issue on Advanced Materials Science in Bulk Nanostructured Metals III

    Article • MATERIALS TRANSACTIONS, January 2016, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  203. Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes

    Article • Scientific Reports, November 2015, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  204. Characterization of Hydrogen-Related Fracture Behavior in As-Quenched Low-Carbon Martensitic Steel and Tempered Medium-Carbon Martensitic Steel

    Article • Metallurgical and Materials Transactions A, September 2015, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  205. Microstructure and Mechanical Properties of Co21Cr22Cu22Fe21Ni14 Processed by High Pressure Torsion and Annealing

    Article • JOM, August 2015, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  206. Grain refinement of 2Mn-0.1C steel by repetitive heat treatment and recrystallization

    Article • IOP Conference Series Materials Science and Engineering, August 2015, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  207. Microstructural evolution of Ti-added interstitial free steel in high strain deformation by hot torsion

    Article • IOP Conference Series Materials Science and Engineering, August 2015, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  208. Erratum to: Recrystallization Behavior of CoCrCuFeNi High-Entropy Alloy

    Article • Metallurgical and Materials Transactions A, April 2015, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  209. Microstructural change due to isochronal annealing in severely plastic-deformed commercial purity aluminium

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, March 2015, Taylor & Francis

    Dr. Nobuhiro Tsuji

  210. Crystallographic Characterization of Cleavage Plane in Low-carbon Martensitic Steel

    Article • Materials Today Proceedings, January 2015, Elsevier

    Dr. Nobuhiro Tsuji

  211. Evaluation of Dislocation Density for 1100 Aluminum with Different Grain Size during Tensile Deformation by Using <i>In-Situ</i> X-ray Diffraction Technique

    Article • MATERIALS TRANSACTIONS, January 2015, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  212. Hydrogen Embrittlement Behavior at Different Strain Rates in Low-carbon Martensitic Steel

    Article • Materials Today Proceedings, January 2015, Elsevier

    Dr. Nobuhiro Tsuji

  213. Improvement of Uniform Elongation by Low Temperature Annealing in Al-2.5%Mg Alloy Processed by Accumulative Roll Bonding

    Article • MATERIALS TRANSACTIONS, January 2015, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  214. Influence of Tempering on Mechanical Properties of Ferrite and Martensite Dual Phase Steel

    Article • Materials Today Proceedings, January 2015, Elsevier

    Dr. Nobuhiro Tsuji

  215. Local Stress Evaluation During Deformation in SUS304 Austenitic Stainless Steel

    Article • Materials Today Proceedings, January 2015, Elsevier

    Dr. Nobuhiro Tsuji

  216. Relationship Between Local Stress Field in Austenite and Variant Selection in Deformation-induced Martensitic Transformation in Fe-24Ni-0.3C Alloy

    Article • Materials Today Proceedings, January 2015, Elsevier

    Dr. Nobuhiro Tsuji

  217. Recrystallization Behavior of CoCrCuFeNi High-Entropy Alloy

    Article • Metallurgical and Materials Transactions A, October 2014, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  218. Ultrafine ferrite formation through cold-rolling and annealing of low-carbon dual-phase steel

    Article • Materials Science and Technology, September 2014, Taylor & Francis

    Dr. Nobuhiro Tsuji

  219. Enhanced Strength and Ductility in an Ultrafine-Grained Fe-22Mn-0.6C Austenitic Steel Having Fully Recrystallized Structure

    Article • Metallurgical and Materials Transactions A, September 2014, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  220. Fabrication of fine recrystallized grains and their mechanical property in HPT processed pure magnesium

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  221. Mechanical properties and microstructure of 6061 aluminum alloy severely deformed by ARB process and subsequently aged at low temperatures

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  222. Microstructural evolution of metastable austenitic steel during high-pressure torsion and subsequent heat treatment

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  223. Improvement of Mechanical Properties by Two-Step Aging in Ultrafine Grained Al-Ag-Sc Alloy

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  224. Mechanical Properties and Aging Behavior of Ultrafine Grained Al-Ag Alloy Fabricated by Accumulative Roll-Bonding

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  225. Microstructures and Mechanical Properties of an Artificially-Aged Al-Mg-Ga Alloy

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  226. Optimizing strength and ductility in Cu–Al alloy with recrystallized nanostructures formed by simple cold rolling and annealing

    Article • Journal of Materials Science, May 2014, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  227. Yielding behavior and its effect on uniform elongation in IF steel with various grain sizes

    Article • Journal of Materials Science, April 2014, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  228. Dynamic Ferrite Transformation Behaviors in 6Ni-0.1C Steel

    Article • JOM, April 2014, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  229. Mechanical Properties of Bulk Ultrafine Grained Aluminum Fabricated by Torsion Deformation at Various Temperatures and Strain Rates

    Article • MATERIALS TRANSACTIONS, January 2014, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  230. Aging Behavior of Ultra-Fine Grained Al–0.5%Si–0.5%Ge Alloy Fabricated by ARB Process

    Article • MATERIALS TRANSACTIONS, January 2014, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  231. Correlation between Continuous/Discontinuous Yielding and Hall–Petch Slope in High Purity Iron

    Article • MATERIALS TRANSACTIONS, January 2014, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  232. Effect of Ferrite Grain Size on Dynamic Tensile Properties of Ultrafine Grained Low Carbon Steels with Various Chemical Compositions

    Article • MATERIALS TRANSACTIONS, January 2014, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  233. Formation of Dillamore orientation during accumulative roll bonding of {001}^|^lang;100^|^rang; aluminum single crystal

    Article • Journal of Japan Institute of Light Metals, January 2014, Japan Institute of Light Metals

    Dr. Nobuhiro Tsuji

  234. Formation of Fully Annealed Nanocrystalline Austenite in Fe–Ni–C Alloy

    Article • MATERIALS TRANSACTIONS, January 2014, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  235. Stability of {4 4 11} ⟨11 11 8⟩ Orientation in a {123} ⟨634⟩ Aluminum Single Crystal Processed by Accumulative Roll Bonding

    Article • MATERIALS TRANSACTIONS, January 2014, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  236. Thermomechanical Processing of Steel –Past, Present and Future–

    Article • Tetsu-to-Hagane, January 2014, Iron and Steel Institute of Japan

    Dr. Nobuhiro Tsuji

  237. Yielding Behavior and Its Effect on Uniform Elongation of Fine Grained IF Steel

    Article • MATERIALS TRANSACTIONS, January 2014, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  238. Microstructure and mechanical properties of spot friction stir welded ultrafine grained 1050 Al and conventional grained 6061-T6 Al alloys

    Article • Materials Science and Engineering A, November 2013, Elsevier

    Dr. Nobuhiro Tsuji

  239. Variant selection of martensite transformation from ultrafine-grained austenite in Fe–Ni–C alloy

    Article • Journal of Alloys and Compounds, November 2013, Elsevier

    Dr. Nobuhiro Tsuji

  240. Fully recrystallized nanostructure fabricated without severe plastic deformation in high-Mn austenitic steel

    Article • Scripta Materialia, May 2013, Elsevier

    Dr. Nobuhiro Tsuji

  241. Occurrence of dynamic ferrite transformation in low-carbon steel above Ae3

    Article • Scripta Materialia, April 2013, Elsevier

    Dr. Nobuhiro Tsuji

  242. Effect of austenite grain size on kinetics of dynamic ferrite transformation in low carbon steel

    Article • Scripta Materialia, April 2013, Elsevier

    Dr. Nobuhiro Tsuji

  243. Dynamic Softening of Flow Stress during Dynamic Ferrite Transformation

    Article • Materials Science Forum, March 2013, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  244. Nanocrystalline Twinning Induced Plasticity Steel with Superior Mechanical Properties Fabricated by Cold Rolling and Annealing

    Article • Materials Science Forum, March 2013, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  245. Recrystallization Texture of Heavily Cold Rolled Polycrystalline Nickel Sheets with and without Strong Starting Cube Texture

    Article • Materials Science Forum, March 2013, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  246. Cross-Sectional Distributions of Mechanical Properties of Fine Cu–Sn Alloy Wire Manufactured by Continuous Rotary Draw Bending

    Article • MATERIALS TRANSACTIONS, January 2013, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  247. Enhancement in Strength of a Cu-1.4 mass%Ni-0.25 mass%P-0.1 mass%Zr Alloy by Cryo-Rolling and Aging

    Article • Journal of the Japan Institute of Metals and Materials, January 2013, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  248. Flow stress analysis for determining the critical condition of dynamic ferrite transformation in 6Ni–0.1C steel

    Article • Acta Materialia, January 2013, Elsevier

    Dr. Nobuhiro Tsuji

  249. Identical Area Observations of Deformation-Induced Martensitic Transformation in SUS304 Austenitic Stainless Steel

    Article • MATERIALS TRANSACTIONS, January 2013, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  250. Improvement in Mechanical Properties of a Cu–2.0 mass%Ni–0.5 mass%Si–0.1 mass%Zr Alloy by Combining Both Accumulative Roll-Bonding and Cryo-Rolling with Aging

    Article • MATERIALS TRANSACTIONS, January 2013, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  251. Microstructures of Pearlite and Martensite Transformed from Ultrafine-Grained Austenite Fabricated through Cyclic Heat Treatment in Medium Carbon Steels

    Article • MATERIALS TRANSACTIONS, January 2013, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  252. PREFACE

    Article • MATERIALS TRANSACTIONS, January 2013, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  253. Texture evolution in {112} <111> aluminum single crystals processed by severe plastic deformation

    Article • Materials Characterization, January 2013, Elsevier

    Dr. Nobuhiro Tsuji

  254. Change in mechanical properties of fine copper wire manufactured by continuous rotary draw bending process

    Article • Journal of Materials Processing Technology, November 2012, Elsevier

    Dr. Nobuhiro Tsuji

  255. Evolution of ultrafine microstructures in commercial purity aluminum heavily deformed by torsion

    Article • Journal of Materials Science, June 2012, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  256. High pressure torsion to refine grains in pure aluminum up to saturation: mechanisms of structure evolution and their dependence on strain

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, June 2012, Taylor & Francis

    Dr. Nobuhiro Tsuji

  257. Development of Cube Texture in Pure Ni Following Ultrahigh Straining by Accumulative Roll Bonding and Annealing

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  258. Effect of SiC particles on the microstructure evolution and mechanical properties of aluminum during ARB process

    Article • Materials Science and Engineering A, April 2012, Elsevier

    Dr. Nobuhiro Tsuji

  259. Evolution of Microstructure and Texture During Cold Rolling and Annealing of a Highly Cube-Textured ({001} $$ \left\langle {100} \right\rangle $$ ) Polycrystalline Nickel Sheet

    Article • Metallurgical and Materials Transactions A, February 2012, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  260. Significant change in mechanical properties of deep drawn ultrafine grained copper wire by additional deformation

    Article • Materials Science and Engineering A, February 2012, Elsevier

    Dr. Nobuhiro Tsuji

  261. Advanced materials in automotive engineering

    Article • January 2012, Elsevier

    Dr. Nobuhiro Tsuji

  262. Aging behavior of ultra-fine grained Al^|^ndash;0.5%Si^|^ndash;0.5%Ge alloy fabricated using ARB process

    Article • Journal of Japan Institute of Light Metals, January 2012, Japan Institute of Light Metals

    Dr. Nobuhiro Tsuji

  263. Changes in Mechanical Characteristics of Pre-Annealed Wires of Cu–Sn Alloy Manufactured by Continuous Draw Bending

    Article • MATERIALS TRANSACTIONS, January 2012, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  264. Characterization of Defects in Severely Deformed Iron by Mechanical Spectroscopy

    Article • Solid State Phenomena, January 2012, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  265. Comparative Analysis of Plastic Flow and Grain Refinement in Pure Aluminium Subjected to Simple Shear-Based Severe Plastic Deformation Processing

    Article • MATERIALS TRANSACTIONS, January 2012, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  266. Crystallographic Features of Martensite Transformed from Ultrafine Grained Austenite Fabricated by Severe Plastic Deformation

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  267. Effect of Deformation Temperature on Microstructure Evolution in ARB Processed Ultralow Carbon IF Steel

    Article • MATERIALS TRANSACTIONS, January 2012, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  268. Microstructural Evolution during ARB Process of Al–0.2 mass% Sc Alloy Containing Al<sub>3</sub>Sc Precipitates in Starting Structures

    Article • MATERIALS TRANSACTIONS, January 2012, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  269. Microstructural and Crystallographic Features of Hydrogen-related Crack Propagation in Low Carbon Martensitic Steel

    Article • ISIJ International, January 2012, Iron and Steel Institute of Japan

    Dr. Nobuhiro Tsuji

  270. Microstructure and Crystallographic Features of Martensite Transformed from Ultrafine-Grained Austenite in Fe–24Ni–0.3C Alloy

    Article • MATERIALS TRANSACTIONS, January 2012, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  271. PREFACE

    Article • MATERIALS TRANSACTIONS, January 2012, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  272. Texture Evolution in Al–0.2 mass%Sc Alloy during ARB Process and Subsequent Annealing

    Article • MATERIALS TRANSACTIONS, January 2012, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  273. Effect of Ultrahigh Straining on the Evolution of Cube Texture ({100}<100>) in High Purity Nickel

    Article • Materials Science Forum, December 2011, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  274. Stability of Cube Oriented Grains during Cold-Rolling of Highly Cube-Oriented Polycrystalline Nickel

    Article • Materials Science Forum, December 2011, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  275. Texture Evolution in ARB Processed Commercial Purity Aluminium

    Article • Materials Science Forum, December 2011, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  276. Systematic Approach to Clarify the Mechanism of Dynamic Transformation in Fe-6Ni-0.1C Alloy

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  277. Critical strain for mechanical alloying of Cu–Ag, Cu–Ni and Cu–Zr by high-pressure torsion

    Article • Scripta Materialia, September 2011, Elsevier

    Dr. Nobuhiro Tsuji

  278. Effect of initial microstructure on ultrafine grain formation through warm deformation in medium-carbon steels

    Article • Scripta Materialia, September 2011, Elsevier

    Dr. Nobuhiro Tsuji

  279. Formability of ultrafine-grained interstitial-free steel fabricated by accumulative roll-bonding and subsequent annealing

    Article • Scripta Materialia, August 2011, Elsevier

    Dr. Nobuhiro Tsuji

  280. Dynamic deformation behavior of ultrafine-grained iron produced by ultrahigh strain deformation and annealing

    Article • Scripta Materialia, May 2011, Elsevier

    Dr. Nobuhiro Tsuji

  281. Effect of Initial Grain Size on the Evolution of {001}〈100〉 Texture in Severely Deformed and Annealed High-Purity Nickel

    Article • Metallurgical and Materials Transactions A, April 2011, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  282. Formation of bimodal grain structures in high purity Al by reversal high pressure torsion

    Article • Scripta Materialia, March 2011, Elsevier

    Dr. Nobuhiro Tsuji

  283. Development of highly cube textured nickel superconductor substrate tapes by Accumulative Roll Bonding (ARB)

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), February 2011, De Gruyter

    Dr. Nobuhiro Tsuji

  284. Effects of Si addition on mechanical properties of copper severely deformed by accumulative roll-bonding

    Article • Journal of Materials Science, January 2011, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  285. Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion

    Article • Journal of Materials Science, January 2011, Springer Science + Business Media

    Professor C Suryanarayana, Dr. Nobuhiro Tsuji

  286. Applying nanostructured steel sheets to automotive body structures

    Article • January 2011, Elsevier

    Dr. Nobuhiro Tsuji

  287. Bulk nanostructured metals and alloys produced by accumulative roll-bonding

    Article • January 2011, Elsevier

    Dr. Nobuhiro Tsuji

  288. Change in Crystal Orientations of a {100} ⟨001⟩ Pure Aluminum Single Crystal during Accumulative Roll Bonding

    Article • MATERIALS TRANSACTIONS, January 2011, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  289. Continuous bending-drawing process to manufacture the ultrafine copper wire with excellent electrical and mechanical properties

    Article • CIRP Annals, January 2011, Elsevier

    Dr. Nobuhiro Tsuji

  290. Effect of Aging Treatment on Ultra-Fine Grains and Si-Phase in Al-0.5%Si Alloy Fabricated by ARB Process

    Article • MATERIALS TRANSACTIONS, January 2011, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  291. Influence of Accumulative Roll Bonding and Cold Rolling Processes on the Precipitation Strengthening Properties for Cu-Ni-P Alloy

    Article • Journal of the Japan Institute of Metals and Materials, January 2011, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  292. Mechanical properties of precipitation strengthening Cu-base alloys highly deformed by ARB process

    Article • Procedia Engineering, January 2011, Elsevier

    Dr. Nobuhiro Tsuji

  293. Ways to Manage Both Strength and Ductility in Nanostructured Steels

    Article • January 2011, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  294. Annealing Behavior of Solution Treated and Aged Al-0.2wt% Sc Deformed by ARB

    Article • Materials Science Forum, December 2010, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  295. Development of Textured Coated Superconductor Substrate Tapes by Severe Plastic Deformation Processing

    Article • Materials Science Forum, December 2010, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  296. High-Temperature Severe Plastic Deformation of Ferritic Steel by Torsion

    Article • Materials Science Forum, December 2010, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  297. Martensitic Transformation from Ultrafine Grained Austenite Fabricated by ARB in Fe-24Ni-0.3C

    Article • Materials Science Forum, December 2010, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  298. Quantification of internal dislocation density using scanning transmission electron microscopy in ultrafine grained pure aluminium fabricated by severe plastic deformation

    Article • Materials Science and Engineering A, December 2010, Elsevier

    Dr. Nobuhiro Tsuji

  299. Change in electrical resistivity of commercial purity aluminium severely plastic deformed

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, November 2010, Taylor & Francis

    Dr. Nobuhiro Tsuji

  300. Martensite/austenite interfaces in ultrafine grained Fe–Ni–C alloy

    Article • Journal of Materials Science, November 2010, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  301. Plastic deformation and creep damage evaluations of type 316 austenitic stainless steels by EBSD

    Article • Materials Characterization, October 2010, Elsevier

    Dr. Nobuhiro Tsuji

  302. Change in microstructures and mechanical properties during deep wire drawing of copper

    Article • Materials Science and Engineering A, August 2010, Elsevier

    Dr. Nobuhiro Tsuji

  303. Cu/Zr nanoscaled multi-stacks fabricated by accumulative roll bonding

    Article • Journal of Alloys and Compounds, August 2010, Elsevier

    Dr. Nobuhiro Tsuji

  304. Evolution of Deformation and Recrystallization Textures in High-Purity Ni and the Ni-5 at. pct W Alloy

    Article • Metallurgical and Materials Transactions A, July 2010, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  305. Analysis of deformation behaviors of ultrafine grained Cu-30%Zn with bimodal grain-size distribution

    Article • Journal of Physics Conference Series, July 2010, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  306. Effect of grain size distribution on mechanical properties of ultrafine grained Al severely deformed by ARB process and subsequently annealed

    Article • Journal of Physics Conference Series, July 2010, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  307. Friction stir welding of high carbon steel with excellent toughness and ductility

    Article • Scripta Materialia, July 2010, Elsevier

    Dr. Nobuhiro Tsuji

  308. High performance of mechanical and electrical properties of Cu-Cr-Zr alloy sheets produced by ARB process and additional thermo-mechanical treatment

    Article • Journal of Physics Conference Series, July 2010, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  309. Preface to the Special Issue on Ultrafine Grained Materials

    Article • Journal of Materials Science, July 2010, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  310. Strain hardening and softening in ultrafine grained Al fabricated by ARB process

    Article • Journal of Physics Conference Series, July 2010, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  311. Fatigue Fracture Behavior of ARB Processed Aluminum

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  312. Nanostructure Formation during Deep Wire-Drawing of Copper

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  313. Susceptibility to Hydrogen Embrittlement of IF Steel with Ultrafine-Grained Structure Produced by Accumulative Roll-Bonding Process

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  314. New Routes for Fabricating Ultrafine-Grained Microstructures in Bulky Steels without Very-High Strains

    Article • Advanced Engineering Materials, May 2010, Wiley

    Dr. Nobuhiro Tsuji

  315. Mechanical Properties and Crash Worthiness of Ultrafine Grained Multi-Phase Steel Sheets for Automotive Body Applications

    Article • SAE International Journal of Materials and Manufacturing, April 2010, SAE International

    Dr. Nobuhiro Tsuji

  316. Fabrication of ZrAlNiCu bulk metallic glass composites containing pure copper particles by high-pressure torsion

    Article • Journal of Alloys and Compounds, March 2010, Elsevier

    Dr. Nobuhiro Tsuji

  317. Effect of initial grain size on the joint properties of friction stir welded aluminum

    Article • Materials Science and Engineering A, December 2009, Elsevier

    Dr. Nobuhiro Tsuji

  318. Metallurgical aspects on the formation of self-organized anodic oxide nanotube layers

    Article • Electrochimica Acta, September 2009, Elsevier

    Dr. Nobuhiro Tsuji

  319. Plastic flow, structure and mechanical properties in pure Al deformed by twist extrusion

    Article • Materials Science and Engineering A, August 2009, Elsevier

    Dr. Nobuhiro Tsuji

  320. Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed

    Article • Acta Materialia, August 2009, Elsevier

    Dr. Nobuhiro Tsuji

  321. Ultrafine grained copper alloy sheets having both high strength and high electric conductivity

    Article • Materials Letters, August 2009, Elsevier

    Dr. Nobuhiro Tsuji

  322. Anodic oxide nanotube layers on Ti–Ta alloys: Substrate composition, microstructure and self-organization on two-size scales

    Article • Corrosion Science, July 2009, Elsevier

    Dr. Nobuhiro Tsuji

  323. Quantification of strain in accumulative roll-bonding under unlubricated condition by finite element analysis

    Article • Computational Materials Science, July 2009, Elsevier

    Dr. Nobuhiro Tsuji

  324. Enhanced structural refinement by combining phase transformation and plastic deformation in steels

    Article • Scripta Materialia, June 2009, Elsevier

    Dr. Nobuhiro Tsuji

  325. Microstructure homogeneity and mechanical properties of electrodeposited nanocrystalline Ni

    Article • Journal of Physics Conference Series, May 2009, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  326. Structural change and improvement of the mechanical properties of a lotus-type porous copper by wire-brushing

    Article • Journal of Physics Conference Series, May 2009, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  327. Texture evolution in pure aluminum subjected to monotonous and reversal straining in high-pressure torsion

    Article • Scripta Materialia, May 2009, Elsevier

    Dr. Nobuhiro Tsuji

  328. Ultrafine grained steels managing both high strength and ductility

    Article • Journal of Physics Conference Series, May 2009, Institute of Physics Publishing

    Dr. Nobuhiro Tsuji

  329. Cold rolling and recrystallization textures of a Ni–5at.% W alloy

    Article • Acta Materialia, April 2009, Elsevier

    Dr. Nobuhiro Tsuji

  330. Fabrication of CuZr(Al) bulk metallic glasses by high pressure torsion

    Article • Intermetallics, April 2009, Elsevier

    Dr. Nobuhiro Tsuji

  331. Increasing the ductility of ultrafine-grained copper alloy by introducing fine precipitates

    Article • Scripta Materialia, April 2009, Elsevier

    Dr. Nobuhiro Tsuji

  332. A new route to fabricate ultrafine-grained structures in carbon steels without severe plastic deformation

    Article • Scripta Materialia, January 2009, Elsevier

    Dr. Nobuhiro Tsuji

  333. Microstructure Evolution in Pure Al Processed with Twist Extrusion

    Article • MATERIALS TRANSACTIONS, January 2009, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  334. Role of strain reversal in grain refinement by severe plastic deformation

    Article • Materials Science and Engineering A, January 2009, Elsevier

    Dr. Nobuhiro Tsuji

  335. Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding

    Article • MATERIALS TRANSACTIONS, January 2009, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  336. Dynamic deformation behavior of ultrafine grained aluminum produced by ARB and subsequent annealing

    Article • Journal of Materials Science, December 2008, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  337. Effect of strain on “hardening by annealing and softening by deformation” phenomena in ultra-fine grained aluminum

    Article • Journal of Materials Science, December 2008, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  338. Mechanical properties of ultrafine grained ferritic steel sheets fabricated by rolling and annealing of duplex microstructure

    Article • Journal of Materials Science, December 2008, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  339. Solid-state amorphization of Cu + Zr multi-stacks by ARB and HPT techniques

    Article • Journal of Materials Science, December 2008, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  340. Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure

    Article • Scripta Materialia, November 2008, Elsevier

    Dr. Nobuhiro Tsuji

  341. Microstructure quantification and correlation with flow stress of ultrafine grained commercially pure Al fabricated by equal channel angular pressing (ECAP)

    Article • Materials Characterization, September 2008, Elsevier

    Dr. Nobuhiro Tsuji

  342. Evolution of antiphase domain (APD)/lamella mixed microstructure in Ti–39at%Al single crystals

    Article • Materials Science and Engineering A, April 2008, Elsevier

    Dr. Nobuhiro Tsuji

  343. Nanostructured Aluminum and IF Steel Produced by Rolling—a Comparative Study

    Article • ISIJ International, January 2008, Iron and Steel Institute of Japan

    Dr Xiaoxu Huang, Dr. Nobuhiro Tsuji

  344. Analysis of the mechanical properties and deformation behavior of nanostructured commercially pure Al processed by equal channel angular pressing (ECAP)

    Article • Materials Science and Engineering A, January 2008, Elsevier

    Dr. Nobuhiro Tsuji

  345. Change in Mechanical Properties and Microstructure of ARB Processed Ti during Annealing

    Article • MATERIALS TRANSACTIONS, January 2008, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  346. Fatigue Crack Propagation Behavior in Commercial Purity Ti Severely Deformed by Accumulative Roll Bonding Process

    Article • MATERIALS TRANSACTIONS, January 2008, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  347. Formation Mechanisms of Ultrafine Grained Structures in Severe Plastic Deformation of Metallic Materials

    Article • Tetsu-to-Hagane, January 2008, Iron and Steel Institute of Japan

    Dr. Nobuhiro Tsuji

  348. Grain Boundary Structure of Ultrafine Grained Pure Copper Fabricated by Accumulative Roll Bonding

    Article • MATERIALS TRANSACTIONS, January 2008, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  349. Managing Both Strength and Ductility in Ultrafine Grained Steels

    Article • ISIJ International, January 2008, Iron and Steel Institute of Japan

    Dr. Nobuhiro Tsuji

  350. Severe plastic deformation (SPD) processes for metals

    Article • CIRP Annals, January 2008, Elsevier

    Dr. Nobuhiro Tsuji

  351. Nanostructured Bulk Copper Fabricated by Accumulative Roll Bonding

    Article • Journal of Nanoscience and Nanotechnology, November 2007, American Scientific Publishers

    Dr. Nobuhiro Tsuji

  352. Unique Mechanical Properties of Nanostructured Metals

    Article • Journal of Nanoscience and Nanotechnology, November 2007, American Scientific Publishers

    Dr. Nobuhiro Tsuji

  353. Bulk Mechanical Alloying of Al/Fe Multilayer by Accumulative Roll-Bonding Process

    Article • Advanced Materials Research, October 2007, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  354. Evolution of Microstructure and Texture of Pure Al Single Crystal Having {112}<110> Orientation during Severe Plastic Deformation

    Article • Advanced Materials Research, October 2007, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  355. Effect of redundant shear strain on microstructure and texture evolution during accumulative roll-bonding in ultralow carbon IF steel

    Article • Acta Materialia, October 2007, Elsevier

    Dr. Nobuhiro Tsuji

  356. Mechanical Properties of Ultra-Fine Grained Fe-Cr-Ni Alloy Fabricated by ARB

    Article • Advanced Materials Research, October 2007, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  357. Reaction of Sn to Nanocrystalline Surface Layer of Cu by Near Surface Severe Plastic Deformation

    Article • September 2007, CrossRef Test Account

    Dr. Nobuhiro Tsuji

  358. Reaction of Sn to Nanocrystalline Surface Layer of Cu by Near Surface Severe Plastic Deformation

    Article • Solid State Phenomena, September 2007, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  359. Microstructure Evolution after Large Strain Deformation in Al-0.13%Mg

    Article • July 2007, CrossRef Test Account

    Dr. Nobuhiro Tsuji

  360. Bulk mechanical alloying of Cu–Ag and Cu/Zr two-phase microstructures by accumulative roll-bonding process

    Article • Acta Materialia, May 2007, Elsevier

    Kazuhiro Hono, Dr. Nobuhiro Tsuji

  361. Friction stir welding of a high carbon steel

    Article • Scripta Materialia, April 2007, Elsevier

    Dr. Nobuhiro Tsuji

  362. Grain Size Saturation during Severe Plastic Deformation

    Article • March 2007, CrossRef Test Account

    Dr. Nobuhiro Tsuji

  363. Grain Size Saturation during Severe Plastic Deformation

    Article • Materials Science Forum, March 2007, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  364. Microstructure and mechanical properties of commercial purity titanium severely deformed by ARB process

    Article • Journal of Materials Science, January 2007, Springer Science + Business Media

    Dr. Nobuhiro Tsuji

  365. Fabrication of Bulk Metallic Glass Sheet in Cu-47 at% Zr Alloys by ARB and Heat Treatment

    Article • MATERIALS TRANSACTIONS, January 2007, Japan Institute of Metals

    Kazuhiro Hono, Dr. Nobuhiro Tsuji

  366. Change in Microstructure and Texture during Annealing of Pure Copper Heavily Deformed by Accumulative Roll Bonding

    Article • MATERIALS TRANSACTIONS, January 2007, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  367. Through-Thickness Characterization of Microstructure and Texture in High Purity Aluminum Processed to High Strain by Accumulative Roll-Bonding

    Article • MATERIALS TRANSACTIONS, January 2007, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  368. Transformation in Stir Zone of Friction Stir Welded Carbon Steels with Different Carbon Contents

    Article • ISIJ International, January 2007, Iron and Steel Institute of Japan

    Dr. Nobuhiro Tsuji

  369. General Mechanism for the Synchronization of Electrochemical Oscillations and Self-Organized Dendrite Electrodeposition of Metals with Ordered 2D and 3D Microstructures

    Article • The Journal of Physical Chemistry C, December 2006, American Chemical Society (ACS)

    Dr. Nobuhiro Tsuji

  370. Martensite transformation from ultrafine grained austenite in Fe–28.5at.% Ni

    Article • Materials Science and Engineering A, November 2006, Elsevier

    Dr. Nobuhiro Tsuji

  371. Friction stir welding of carbon steels

    Article • Materials Science and Engineering A, August 2006, Elsevier

    Dr. Nobuhiro Tsuji

  372. Quantification of annealed microstructures in ARB processed aluminum

    Article • Acta Materialia, June 2006, Elsevier

    Dr. Nobuhiro Tsuji

  373. Microstructure homogeneity in various metallic materials heavily deformed by accumulative roll-bonding

    Article • Materials Science and Engineering A, May 2006, Elsevier

    Dr. Nobuhiro Tsuji

  374. EBSD and TEM Characterization of Ultrafine Grained High Purity Aluminum Produced by Accumulative Roll-Bonding

    Article • April 2006, CrossRef Test Account

    Dr. Nobuhiro Tsuji

  375. Enhancement of Reaction of Zinc on Superficially Nanocrystallized IF Steel by Near Surface-Severe Plasitc Deformation

    Article • April 2006, CrossRef Test Account

    Dr. Nobuhiro Tsuji

  376. Internal Stress Field in Ultrafine Grained Aluminium Fabricated by Accumulative Roll-Bonding

    Article • April 2006, CrossRef Test Account

    Dr. Nobuhiro Tsuji

  377. Microstructural Evolution in 36%Ni Austenitic Steel during the ARB Process

    Article • April 2006, CrossRef Test Account

    Dr. Nobuhiro Tsuji

  378. Tensile Deformation Behaviors of Ultrafine Grained Al-Fe-Si Alloy Sheets

    Article • April 2006, CrossRef Test Account

    Dr. Nobuhiro Tsuji

  379. Variant Selection of Plate Martensite in Fe-28.5at.%Ni Alloy

    Article • April 2006, CrossRef Test Account

    Dr. Nobuhiro Tsuji

  380. Hardening by Annealing and Softening by Deformation in Nanostructured Metals

    Article • Science, April 2006, American Association for the Advancement of Science

    Dr. Nobuhiro Tsuji

  381. Energies of conservative and non-conservative antiphase boundaries in Ti3Al: a first principles study

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, March 2006, Taylor & Francis

    Dr. Nobuhiro Tsuji

  382. Crystallographic features of lath martensite in low-carbon steel

    Article • Acta Materialia, March 2006, Elsevier

    Dr. Nobuhiro Tsuji

  383. Friction Stir Welding of Ultrafine Grained Interstitial Free Steels

    Article • MATERIALS TRANSACTIONS, January 2006, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  384. Diffusion Reactivity between Zinc Plate Layer and Nanocrystalline Surface Layer of IF Steel by Near Surface-Severe Plastic Deformation

    Article • December 2005, CrossRef Test Account

    Dr. Nobuhiro Tsuji

  385. Bulk Mechanical Alloying of Zr-Cu System by Accumulative Roll Bonding (ARB)

    Article • Journal of Metastable and Nanocrystalline Materials, September 2005, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  386. Crystallographic analysis of plate martensite in Fe–28.5 at.% Ni by FE-SEM/EBSD

    Article • Materials Characterization, May 2005, Elsevier

    Dr. Nobuhiro Tsuji

  387. Elongation increase in ultra-fine grained Al–Fe–Si alloy sheets

    Article • Acta Materialia, April 2005, Elsevier

    Dr. Nobuhiro Tsuji

  388. Internal Friction of Ultrafine-Grained Nickel Produced by Accumulative Roll-Bonding(ARB)

    Article • Journal of the Japan Institute of Metals and Materials, January 2005, Japan Institute of Metals

    Dr. Nobuhiro Tsuji

  389. Structure and strength after large strain deformation

    Article • Materials Science and Engineering A, December 2004, Elsevier

    Dr. Nobuhiro Tsuji

  390. Aging behavior of ultrafine grained Al–2 wt%Cu alloy severely deformed by accumulative roll bonding

    Article • Science and Technology of Advanced Materials, January 2004, Taylor & Francis

    Dr. Nobuhiro Tsuji

  391. Effect of rolling reduction on ultrafine grained structure and mechanical properties of low-carbon steel thermomechanically processed from martensite starting structure

    Article • Science and Technology of Advanced Materials, January 2004, Taylor & Francis

    Dr. Nobuhiro Tsuji

  392. Formation of nanocrystalline surface layers in various metallic materials by near surface severe plastic deformation

    Article • Science and Technology of Advanced Materials, January 2004, Taylor & Francis

    Dr. Nobuhiro Tsuji

  393. Friction stir welding of ultrafine grained Al alloy 1100 produced by accumulative roll-bonding

    Article • Scripta Materialia, January 2004, Elsevier

    Dr. Nobuhiro Tsuji

  394. Growth kinetics of antiphase domain in Ti3Al intermetallic compound

    Article • Science and Technology of Advanced Materials, January 2004, Taylor & Francis

    Dr. Nobuhiro Tsuji

  395. Microstructure and texture through thickness of ultralow carbon IF steel sheet severely deformed by accumulative roll-bonding

    Article • Science and Technology of Advanced Materials, January 2004, Taylor & Francis

    Dr. Nobuhiro Tsuji

  396. Microstructures and mechanical properties of bulk nanocrystalline Fe–Al–C alloys made by mechanically alloying with subsequent spark plasma sintering

    Article • Science and Technology of Advanced Materials, January 2004, Taylor & Francis

    Dr. Nobuhiro Tsuji

  397. Fabrication of Surface Nanocrystalline Aluminum Alloys

    Article • Materials Science Forum, August 2003, Trans Tech Publications

    Dr. Nobuhiro Tsuji

  398. High damping capacity of ultra-fine grained aluminum produced by accumulative roll bonding

    Article • Journal of Alloys and Compounds, June 2003, Elsevier

    Dr. Nobuhiro Tsuji

  399. Microstructural change of ultrafine-grained aluminum during high-speed plastic deformation

    Article • Materials Science and Engineering A, June 2003, Elsevier

    Dr. Nobuhiro Tsuji

  400. ARB (Accumulative Roll-Bonding) and other new Techniques to Produce Bulk Ultrafine Grained Materials

    Article • Advanced Engineering Materials, May 2003, Wiley

    Dr. Nobuhiro Tsuji

  401. Microstructural evolution during accumulative roll-bonding of commercial purity aluminum

    Article • Materials Science and Engineering A, January 2003, Elsevier

    Dr. Nobuhiro Tsuji

  402. Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing

    Article • Scripta Materialia, December 2002, Elsevier

    Dr. Nobuhiro Tsuji

  403. Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensite

    Article • Acta Materialia, September 2002, Elsevier

    Dr. Nobuhiro Tsuji

  404. Nanoscale crystallographic analysis of ultrafine grained IF steel fabricated by ARB process

    Article • Scripta Materialia, July 2002, Elsevier

    Dr. Nobuhiro Tsuji

  405. A new and simple process to obtain nano-structured bulk low-carbon steel with superior mechanical property

    Article • Scripta Materialia, February 2002, Elsevier

    Dr. Nobuhiro Tsuji

  406. Role of shear strain in ultragrain refinement by accumulative roll-bonding (ARB) process

    Article • Scripta Materialia, February 2002, Elsevier

    Dr. Nobuhiro Tsuji

  407. Pt diffusion in B2-type ordered NiAl intermetallic compound and its diffusion mechanisms

    Article • Science and Technology of Advanced Materials, January 2000, Taylor & Francis

    Dr. Nobuhiro Tsuji

  408. Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process

    Article • Scripta Materialia, March 1999, Elsevier

    Dr. Nobuhiro Tsuji

  409. Effect of initial orientation on the cold-rolling behavior of solidified columnar crystals in an Fe-36%Ni austenitic alloy

    Article • Acta Metallurgica et Materialia, February 1995, Elsevier

    Dr. Nobuhiro Tsuji

  410. Recrystallization of solidified columnar crystals in an Fe-36%Ni austenitic alloy

    Article • Acta Metallurgica et Materialia, February 1995, Elsevier

    Dr. Nobuhiro Tsuji

  411. Effect of constraint on the rolled microstructure of (001)[100] oriented single crystals in an Fe-19%Cr ferritic alloy

    Article • Scripta Metallurgica et Materialia, August 1993, Elsevier

    Dr. Nobuhiro Tsuji

  412. Effect of Initial Orientation on the Cold Rolling Behavior of Solidified Columnar Crystals in a 19%Cr Ferritic Stainles Steel.

    Article • ISIJ International, January 1992, Iron and Steel Institute of Japan

    Dr. Nobuhiro Tsuji

  413. Fabrication of Bulk Nanostructured Materials by Accumulative Roll Bonding (ARB)

    Article • Wiley

    Dr. Nobuhiro Tsuji