All Stories

  1. Starch Films Reinforced with Pistachio Shell Particles: A Sustainable Biocomposite

    Article • Polymers, July 2025, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  2. Ballistic Protection

    Article • May 2025, Trans Tech Publications

    Dr JOSE LUIS RIVERA-ARMENTA, Prof. Pavlo Kryvenko

  3. Pectin Extraction Process from Cocoa Pod Husk (Theobroma cacao L.) and Characterization by Fourier Transform Infrared Spectroscopy

    Article • ChemEngineering, February 2025, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA, Zenaida Guerra

  4. Effect of time on the rheological behavior of asphalt mixtures modified with sargassum and SBS compounds of varying vinyl content

    Article • MRS Advances, February 2025, Springer Science + Business Media

    Dr JOSE LUIS RIVERA-ARMENTA

  5. Evaluation of sargassum particles on the thermomechanical properties of HIPS/SBS composite

    Article • MRS Advances, January 2025, Springer Science + Business Media

    Dr JOSE LUIS RIVERA-ARMENTA, Dr Ana Beatriz Morales

  6. Pectin–$${\text{SiO}}_{2}$$ composites: Assessment some physical properties

    Article • MRS Advances, November 2024, Springer Science + Business Media

    Dr JOSE LUIS RIVERA-ARMENTA

  7. Development of a Composite Filament Based on Polypropylene and Garlic Husk Particles for 3D Printing Applications

    Article • Applied Sciences, October 2024, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  8. INFLUENCE OF CELLULOSE NANOCRYSTALS ON POLYVINYL(PYRROLIDONE) GRAPHITE COMPOSITES

    Article • Cellulose Chemistry and Technology, May 2024, Institutul de Chimie Macromoleculara Petru Poni

    Dr Ana Beatriz Morales, Dr JOSE LUIS RIVERA-ARMENTA

  9. Bacterial cellulose from mother of vinegar loaded with silver nanoparticles as an effective antiseptic for wound-healing: antibacterial activity against Staphylococcus aureus and Escherichia coli

    Article • Chemical Papers, March 2024, Springer Science + Business Media

    Dr Ana Beatriz Morales, Dr JOSE LUIS RIVERA-ARMENTA

  10. 3D printing polypropylene composites reinforced with functionalized halloysite: Balance between stiffness and impact resistance

    Article • Polymer Composites, February 2024, Wiley

    Dr JOSE LUIS RIVERA-ARMENTA

  11. Evaluation of Starch–Garlic Husk Polymeric Composites through Mechanical, Thermal, and Thermo-Mechanical Tests

    Article • Polymers, January 2024, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  12. Investigation of the impact of the vinyl content in SBS composite with sargassum in asphalt

    Article • MRS Advances, January 2024, Springer Science + Business Media

    Dr JOSE LUIS RIVERA-ARMENTA

  13. Novel PolyPropylene–Sargassum Particles Composites: Evaluation of Thermal and Thermomechanical Properties

    Article • Journal of Composites Science, November 2023, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  14. Physical Properties of Thermoplastic Cornstarch/Hibiscus sabdariffa Fiber Obtained by Evaporation Casting

    Article • Starch - Stärke, April 2023, Wiley

    Dr JOSE LUIS RIVERA-ARMENTA

  15. Sustainable Materials

    Article • February 2023, Trans Tech Publications

    Dr JOSE LUIS RIVERA-ARMENTA

  16. "EVALUATION OF A CROSS-LINKING AGENT IN THE PREPARATION OF FILMS BASED ON CHITOSAN AND PECTIN FOR FOOD PACKAGING APPLICATIONS "

    Article • Cellulose Chemistry and Technology, November 2022, Institutul de Chimie Macromoleculara Petru Poni

    Dr JOSE LUIS RIVERA-ARMENTA

  17. Preparation and Evaluation of Thermal Properties of Composites Based on Polypropylene Reinforced with Garlic Husk Particles (GHP)

    Article • Journal of Natural Fibers, November 2022, Taylor & Francis

    Dr JOSE LUIS RIVERA-ARMENTA

  18. 3D printing of a composite iPP /quill of chicken feathers functionalized with pimelic acid

    Article • Polymer Composites, September 2022, Wiley

    Dr JOSE LUIS RIVERA-ARMENTA

  19. Thermal and Thermomechanical Characterization of Polypropylene-Seed Shell Particles Composites

    Article • Applied Sciences, August 2022, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  20. Applications of Calorimetry

    Article • June 2022, IntechOpen

    Dr JOSE LUIS RIVERA-ARMENTA

  21. Structural and electrical characterization of the titanium-based films deposited on the amorphous glass surface

    Article • Journal of Materials Science Materials in Electronics, May 2022, Springer Science + Business Media

    Dr JOSE LUIS RIVERA-ARMENTA

  22. Evaluation of Thermal Properties of Composites Prepared from Pistachio Shell Particles Treated Chemically and Polypropylene

    Article • Molecules, January 2022, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA, Dr Ana Beatriz Morales

  23. Sargassum-Modified Asphalt: Effect of Particle Size on Its Physicochemical, Rheological, and Morphological Properties

    Article • Sustainability, October 2021, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  24. Isolation of ocotillol/ocotillone from Fouquieria splendens (Ocote) using a batch reactor

    Article • Preparative Biochemistry & Biotechnology, October 2021, Taylor & Francis

    Dr JOSE LUIS RIVERA-ARMENTA, Dr Ana Beatriz Morales

  25. Theoretical–Experimental Study of the Release of Chlorine during the Synthesis of BHET in the Presence of PVC

    Article • Macromolecular Reaction Engineering, June 2021, Wiley

    Dr JOSE LUIS RIVERA-ARMENTA, Dr Ana Beatriz Morales

  26. Composite Materials

    Article • March 2021, IntechOpen

    Professor Mohammad Asaduzzaman Chowdhury, Dr JOSE LUIS RIVERA-ARMENTA

  27. Investigation of the performance of asphalt binder modified by sargassum

    Article • Construction and Building Materials, February 2021, Elsevier

    Dr JOSE LUIS RIVERA-ARMENTA

  28. Evaluation of Jatropha curcas and Pistachio Shell Particles as Modifier for Asphalt Binder

    Article • Applied Sciences, January 2021, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  29. Evaluation of Addition of Carbon Nano Materials Over Properties of an Elastomeric Matrix

    Article • Materiale Plastice, January 2021, Revista de Chimie SRL

    Dr JOSE LUIS RIVERA-ARMENTA

  30. Modelling of acetaminophen release from hydroxyethylcellulose/polyacrylamide hydrogel

    Article • Materials Research Express, January 2021, Institute of Physics Publishing

    Dr JOSE LUIS RIVERA-ARMENTA, Dr Ana Beatriz Morales

  31. Influence of chicken feather on the rheological properties and performance of modified asphalts

    Article • Construction and Building Materials, December 2020, Elsevier

    Dr JOSE LUIS RIVERA-ARMENTA, Dr Ana Beatriz Morales

  32. Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair

    Article • Journal of Applied Polymer Science, November 2020, Wiley

    Dr JOSE LUIS RIVERA-ARMENTA

  33. Semiconducting elastomers based on polyaniline/clay nanocomposites and SEBS obtained by an alternative processing technique

    Article • Synthetic Metals, October 2020, Elsevier

    Dr JOSE LUIS RIVERA-ARMENTA

  34. Development of a Composite from TPS–EVOH–SBR Reinforced with Coconut Fiber

    Article • Sustainability, September 2020, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  35. Low Concentrations for Significant Improvements in Thermal and Thermomechanical Properties of Poly(Lactic Acid)–Keratin Biocomposites Obtained by Extrusion and 3D Printing

    Article • Journal of Natural Fibers, July 2020, Taylor & Francis

    Dr JOSE LUIS RIVERA-ARMENTA

  36. Evaluation of Chicken Feather and Styrene-Butadiene/Chicken Feather Composites as Modifier for Asphalts Binder

    Article • Applied Sciences, November 2019, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA, Dr Ana Beatriz Morales

  37. Efecto de la adición de materiales compuestos de estireno-butadieno/plumas de pollo en la modificación de asfaltos

    Article • Revista de Ingeniería Civil, September 2019, ECORFAN

    Dr JOSE LUIS RIVERA-ARMENTA

  38. Graphite Nanoplatelets in Elastomer Composites

    Article • Microscopy and Microanalysis, August 2019, Cambridge University Press

    Dr JOSE LUIS RIVERA-ARMENTA

  39. Nanostructures of graphene oxide modified with ZnO: synthesis and photocatalyst evaluation under sunlight

    Article • Fullerenes Nanotubes and Carbon Nanostructures, June 2019, Taylor & Francis

    Dr JOSE LUIS RIVERA-ARMENTA, Dr Ana Beatriz Morales, Luis Macclesh del Pino

  40. Effect of Surfactant in Particle Shape and Thermal Degradation of Eggshell Particles

    Article • Materials Research, April 2019, FapUNIFESP (SciELO)

    Dr JOSE LUIS RIVERA-ARMENTA

  41. Acetylsalicylic Acid (ASA) on Hydroxyethylcellulose/Polyacrylamide Gel (HEC/PAAm) as a Proposal for a Dermatological Compress: Mathematical Modeling of ASA Release Kinetics

    Article • International Journal of Polymer Science, January 2019, Hindawi Publishing Corporation

    Dr JOSE LUIS RIVERA-ARMENTA, Dr Ana Beatriz Morales

  42. Polymer Rheology

    Article • October 2018, IntechOpen

    Dr JOSE LUIS RIVERA-ARMENTA

  43. Preparation and characterization of composites from copolymer styrene-butadiene and chicken feathers

    Article • Polímeros, September 2018, FapUNIFESP (SciELO)

    Dr JOSE LUIS RIVERA-ARMENTA

  44. Effect of Clay Loading in the Morphology and Electrical Conductivity of Polyaniline-Clay/Elastomer Semiconductors

    Article • Microscopy and Microanalysis, August 2018, Cambridge University Press

    Dr JOSE LUIS RIVERA-ARMENTA

  45. Evaluation of Styrene Content over Physical and Chemical Properties of Elastomer/TPS-EVOH/Chicken Feather Composites

    Article • July 2018, IntechOpen

    Dr JOSE LUIS RIVERA-ARMENTA

  46. Multidimensional Nanocomposites of Epoxy Reinforced with 1D and 2D Carbon Nanostructures for Improve Fracture Resistance

    Article • Polymers, March 2018, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  47. Preparation and properties of modified asphalt using branch SBS/nanoclay nanocomposite as a modifier

    Article • Road Materials and Pavement Design, March 2018, Taylor & Francis

    Dr JOSE LUIS RIVERA-ARMENTA

  48. Polyaniline/clay nanocomposites. A comparative approach on the doping acid and the clay spacing technique

    Article • Synthetic Metals, February 2018, Elsevier

    Dr JOSE LUIS RIVERA-ARMENTA

  49. Manufacturing of Composites from Chicken Feathers and Polyvinyl Chloride (PVC)

    Article • July 2017, Wiley

    Dr JOSE LUIS RIVERA-ARMENTA

  50. Antimicrobial, Optical and Mechanical Properties of Chitosan–Starch Films with Natural Extracts

    Article • International Journal of Molecular Sciences, May 2017, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  51. Study of the dispersion of Cloisite 10A in recycled polyethylene terephtalate by extrusion

    Article • DYNA, January 2017, Universidad Nacional de Colombia

    Dr JOSE LUIS RIVERA-ARMENTA

  52. Effect of the method and impregnation time on the surface acidity of zirconia modified with boron

    Article • Journal of Sol-Gel Science and Technology, December 2016, Springer Science + Business Media

    Dr JOSE LUIS RIVERA-ARMENTA

  53. Chitosan/ Mimosa tenuiflora films as potential cellular patch for skin regeneration

    Article • International Journal of Biological Macromolecules, December 2016, Elsevier

    Dr JOSE LUIS RIVERA-ARMENTA

  54. Evaluation of Addition of Reactive Resin for an Adhesive Formulation of Pressure-Sensitive Adhesive

    Article • November 2016, IntechOpen

    Dr JOSE LUIS RIVERA-ARMENTA

  55. PAni/SBR composite as anticorrosive coating for carbon steel, part II: electrochemical characterization

    Article • Polymer Bulletin, July 2016, Springer Science + Business Media

    Dr JOSE LUIS RIVERA-ARMENTA

  56. Crude oil UV spectroscopy and light scattering characterization

    Article • Petroleum Science and Technology, April 2016, Taylor & Francis

    Dr JOSE LUIS RIVERA-ARMENTA

  57. Physical and rheological properties of asphalt modified with SEBS/montmorillonite nanocomposite

    Article • Construction and Building Materials, March 2016, Elsevier

    Dr JOSE LUIS RIVERA-ARMENTA

  58. Synthesis of Highcis-1,4-BR with Neodymium for the Manufacture of Tires

    Article • International Journal of Polymer Science, January 2016, Hindawi Publishing Corporation

    Dr JOSE LUIS RIVERA-ARMENTA

  59. PANI/SBR composites as anticorrosive coatings for carbon steel I. Chemical, morphological and superficial characterization

    Article • Polymer Bulletin, November 2015, Springer Science + Business Media

    Dr JOSE LUIS RIVERA-ARMENTA

  60. Evaluation of Crosslinking Reaction in Adhesive Based Styrene- Butadiene Elastomers Using Infrared Spectroscopy

    Article • March 2015, IntechOpen

    Dr JOSE LUIS RIVERA-ARMENTA

  61. THERMAL EVALUATION OF CURING OF SBR BASED ADHESIVES USING DICUMYL PEROXIDE

    Article • Química Nova, January 2015, GN1 Genesis Network

    Dr JOSE LUIS RIVERA-ARMENTA

  62. Chitosan–starch film reinforced with magnetite-decorated carbon nanotubes

    Article • Journal of Alloys and Compounds, December 2014, Elsevier

    Dr JOSE LUIS RIVERA-ARMENTA

  63. All Green Composites from Fully Renewable Biopolymers: Chitosan-Starch Reinforced with Keratin from Feathers

    Article • Polymers, March 2014, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  64. PANI/SBR COMPOSITES AS ANTICORROSIVE COATINGS FOR CARBON STEEL I.

    Article • Journal of Composite Materials, January 2014, SAGE Publications

    Dr JOSE LUIS RIVERA-ARMENTA

  65. Study of graft copolymerization of butyl acrylate onto starch using a redox initiator system

    Article • Química Nova, January 2014, GN1 Genesis Network

    Dr JOSE LUIS RIVERA-ARMENTA

  66. Influence of 1D and 2D Carbon Fillers and Their Functionalisation on Crystallisation and Thermomechanical Properties of Injection Moulded Nylon 6,6 Nanocomposites

    Article • Journal of Nanomaterials, January 2014, Hindawi Publishing Corporation

    Dr JOSE LUIS RIVERA-ARMENTA

  67. Effects on the Thermo-Mechanical and Crystallinity Properties of Nylon 6,6 Electrospun Fibres Reinforced with One Dimensional (1D) and Two Dimensional (2D) Carbon

    Article • Materials, August 2013, MDPI AG

    Dr JOSE LUIS RIVERA-ARMENTA

  68. Thermal & morphological evaluation of linear and radial SEBS- polypropylene blends

    Article • Polímeros, January 2013, FapUNIFESP (SciELO)

    Dr JOSE LUIS RIVERA-ARMENTA

  69. Polyurethane-Keratin Membranes: Structural Changes by Isocyanate and pH, and the Repercussion on Cr(VI) Removal

    Article • International Journal of Polymer Science, January 2013, Hindawi Publishing Corporation

    Dr JOSE LUIS RIVERA-ARMENTA

  70. Nylon 6,6 electrospun fibres reinforced by amino functionalised 1D and 2D carbon

    Article • IOP Conference Series Materials Science and Engineering, September 2012, Institute of Physics Publishing

    Dr JOSE LUIS RIVERA-ARMENTA

  71. Evaluation of Graft Copolymerization of Acrylic Monomers Onto Natural Polymers by Means Infrared Spectroscopy

    Article • April 2012, IntechOpen

    Dr JOSE LUIS RIVERA-ARMENTA

  72. Removal of Hexavalent Chromium from Water by Polyurethane–Keratin Hybrid Membranes

    Article • Water Air & Soil Pollution, November 2010, Springer Science + Business Media

    Dr JOSE LUIS RIVERA-ARMENTA

  73. Studies on the Catalytic Activity of Sulfated Zirconia Promoted with Cerium Oxide

    Article • Advanced Materials Research, August 2010, Trans Tech Publications

    Dr JOSE LUIS RIVERA-ARMENTA

  74. Synthesis and characterization of organogel from poly(acrylic acid) with cellulose acetate

    Article • e-Polymers, January 2010, De Gruyter

    Dr JOSE LUIS RIVERA-ARMENTA

  75. Injection molded thermoplastic starch/natural rubber/clay nanocomposites: Morphology and mechanical properties

    Article • Carbohydrate Polymers, May 2009, Elsevier

    Dr JOSE LUIS RIVERA-ARMENTA

  76. Gels from acrylic acid and hydroxypropyl cellulose via free radical polymerization

    Article • e-Polymers, January 2008, De Gruyter

    Dr JOSE LUIS RIVERA-ARMENTA, Dr Ana Beatriz Morales

  77. Effect of temperature and pH on swelling behavior of hydroxyethyl cellullose-acrylamide hydrogel

    Article • e-Polymers, January 2007, De Gruyter

    Dr JOSE LUIS RIVERA-ARMENTA

  78. New polyurethane foams modified with cellulose derivatives

    Article • European Polymer Journal, December 2004, Elsevier

    Dr JOSE LUIS RIVERA-ARMENTA

  79. Novel blends from agave fibers and poly(methyl methacrylate)

    Article • Macromolecular Symposia, July 2003, Wiley

    Dr JOSE LUIS RIVERA-ARMENTA

  80. Materiale Plastice

    Article • Materiale Plastice, Revista de Chimie SRL

    Dr JOSE LUIS RIVERA-ARMENTA