About my research
Dr. Morales obtained the title of Chemical Engineer and the master's degree in science both from the Technological Institute of Ciudad Madero. The Doctor of Science degree from the University of Ulm in Germany. She joined the Technological Institute in 1993, where she is currently a permanent C researcher, an active member of the Mexican Academy of Sciences, level II in the National System of Researchers. Her research lines include two areas related to chemical engineering and materials
All Stories
- Analysis of Kinetic Effects of Nanofibrillated Cellulose on MMA Polymerization via Temperature Monitoring
Article
- Cyborg Botany: Integración de un sistema hibrido de adquisición de datos basado en plantas y electrónica
Article
- Evaluation of sargassum particles on the thermomechanical properties of HIPS/SBS composite
Article
- Polimerización vía radicales libres In-situ en presencia de nanocelulosa: un enfoque sostenible para la obtención de materiales compuestos
- Glycerol Carbonate as an Emulsifier for Light Crude Oil: Synthesis, Characterization, and Stability Analysis
- Short Glass Fiber Modifier Trisilanol–Isobutyl Polyhedral Silsesquioxane as Interfacial in Polypropylene Matrix: Effect of Flame Retardation and Mechanical Properties
- Plants with silver nanoparticles to improve electrical conductivity: an innovative approach in biology
- Photoluminescence enhancement after thermal treatment of cellulose from different sources
- Study of the Mechanical and Electrochemical Performance of Structural Concrete Incorporating Recycled Polyethylene Terephthalate as a Partial Fine Aggregate Replacement
Article
- INFLUENCE OF CELLULOSE NANOCRYSTALS ON POLYVINYL(PYRROLIDONE) GRAPHITE COMPOSITES
- Bacterial cellulose from mother of vinegar loaded with silver nanoparticles as an effective antiseptic for wound-healing: antibacterial activity against Staphylococcus aureus and Escherichia coli
Article
- A novel metaheuristic inspired by horned lizard defense tactics
Article
- Exploring Some Kinetic Aspects of the Free Radical Polymerization of PDMS-MA
- Optimization of the Synthesis Parameters and Application of Cellulose Nanocrystals as Binders in Capacitors
- Toward an understanding of the effects of nanocellulose during the free-radical polymerization reactions. Kinetic aspects of suspension-free radical polymerization of methyl methacrylate (MMA) in the presence and absence of nanocellulose
- Relationship analysis of surface roughness measurements on coatings using AFM and fractal dimension by mesoscopic model methods
- Electrochemical Oxidation of Pb II Using Carbon Electrodes Doped with Nanocellulose-FeOx
Article
- Contributing to a better comprehension of: the styrene bulk free-radical polymerization with n-pentane added as a blowing agent for producing expandable polystyrene
- Crystallization effect of poly(L-lactic acid)/silver nanocomposites blends, on barrier and mechanical properties using glyceryl triacetate as plasticizer
- Influence of ammonium polyphosphate‐modified polypropylene on flammability characteristics of polypropylene keratin and chitosan sustainable composites
- RELATIONSHIP ANALYSIS BETWEEN TWO DIFFERENT METHODS OF SURFACE FRACTAL DIMENSION IN METAL–CERAMIC COATINGS SPUTTERED BY RF-MAGNETRON
- Structure, functional groups analysis and tribo-mechanical behavior of carbide and nitride coatings deposited on AISI 1060 substrates by RF-magnetron sputtering
- Synthesis of glycerol carbonate from glycerin with CaCO3 in a batch reactor
- Corrigendum to “A Novel Bio-Inspired Algorithm Applied to Selective Harmonic Elimination in a Three-Phase Eleven-Level Inverter”
- Evaluation of Thermal Properties of Composites Prepared from Pistachio Shell Particles Treated Chemically and Polypropylene
Article
- A Bio-Inspired Method for Mathematical Optimization Inspired by Arachnida Salticidade
- Trends in the Addition of PET and Natural Fibers to the Concrete- Steel Reinforcement System
- Isolation of ocotillol/ocotillone from Fouquieria splendens (Ocote) using a batch reactor
- A Bio-Inspired Method for Engineering Design Optimization Inspired by Dingoes Hunting Strategies
- Electrochemical Properties of TiWN/TiWC Multilayer Coatings Deposited by RF-Magnetron Sputtering on AISI 1060
- Theoretical–Experimental Study of the Release of Chlorine during the Synthesis of BHET in the Presence of PVC
- One step in situ synthesis of Ag/AgCl nanoparticles in a cellulose nanofiber matrix for the development of energy storage paper
- Upgrading Euphorbia Antisyphilitica fiber compost: A waste material turned into nanocrystalline cellulose
- Modelling of acetaminophen release from hydroxyethylcellulose/polyacrylamide hydrogel
- A Novel Bio-Inspired Algorithm Applied to Selective Harmonic Elimination in a Three-Phase Eleven-Level Inverter
Article
- Influence of chicken feather on the rheological properties and performance of modified asphalts
- Self-ordered cellulose nanocrystals and microscopic investigations
- Visible light induced photocatalytic degradation of 2-nitrophenol at high concentration implementing rGOTiO2: mathematical modeling behavior
- Optical and tribo-mechanical characterization in metal-ceramic multilayers coatings
- Compatibility, crystallinity and mechanical properties of poly(lactic acid)‐poly(ether‐ block ‐amide) based copper nanocomposites
- Morphological and Electrical Properties of Nanocellulose Compounds and Its Application on Capacitor Assembly
- Evaluation of Chicken Feather and Styrene-Butadiene/Chicken Feather Composites as Modifier for Asphalts Binder
- Mathematical Modelling of Acetaminophen Release in HPC/PAAm Hydrogel: Synthesis and Application
- Influence of ionic liquid on graphite/silver nanoparticles dispersion and antibacterial properties against Escherichia coli of PP/EPDM composite coatings
- Nanostructures of graphene oxide modified with ZnO: synthesis and photocatalyst evaluation under sunlight
- Isolation of Cellulose Nanocrystals from Typha domingensis Named Southern Cattail Using a Batch Reactor
- Effect of magnetite nanoparticles and their surface modification on the mechanical and magnetic properties of silicon‐based magnetic elastomer nanocomposite
Article
- Curing kinetics of diglycidyl ether of Bisphenol-A epoxy system using a tertiary amine, through the study of its rheometric characteristics
- Acetylsalicylic Acid (ASA) on Hydroxyethylcellulose/Polyacrylamide Gel (HEC/PAAm) as a Proposal for a Dermatological Compress: Mathematical Modeling of ASA Release Kinetics
- Stearic acid as interface modifier and lubricant agent of the system: Polypropylene/calcium carbonate nanoparticles
- Characterization and use of southern cattail for biorefining-based production of furfural
- Composites of polypropylene/Candelilla fiber (Euphorbia antisyphilitica): Synergic of wax-polypropylene grafted Maleic anhydride
- The incorporation of TiO2 into graphene oxide sheets improved the band gap
Article
- Síntesis y caracterización electroquímica de recubrimientos de multicapas metal cerámico de W/WN, Ti/TiN y WTiN
- Study of Dicumyl Peroxide in Crosslinking Process of a SBS-Based Pressure Sensitive Adhesive
- Fructose–Mediated Gold Nanoparticles Synthesis
- Influence of modified polyethylene compatibilizer on filler dispersion and flammability characteristics of linear low density polyethylene/cyclo olefin copolymer blends containing flame retardant combinations
- Improvement of the Photostability of Low-Density Polyethylene and Ethylene Vinyl Acetate Blends with Nanoclay: Toward Durable Nanocomposites for Potential Application in Greenhouse Cover Films
- Influence of carbon nanofiber functionalization and compatibilizer on the physical properties of carbon nanofiber reinforced polypropylene nanocomposites
- Synergistic effect of silver nanoparticle content on the optical and thermo-mechanical properties of poly(l-lactic acid)/glycerol triacetate blends
- Improvement of toughness properties of polypropylene filled with nanobentonite using stearic acid as interface modifier
- Enhancement of crystallinity and toughness of poly (l -lactic acid) influenced by Ag nanoparticles processed by twin screw extruder
- Influence of functionalized polypropylene on polypropylene/graphene oxide nanocomposite properties
- Deposition of Ibuprofen Crystals on Hydroxypropyl Cellulose/Polyacrylamide Gel: Experimental and Mathematic Modeling Releasing
- Metal removal using gels
- Preparation and characterization of candelilla fiber (Euphorbia antisyphilitica) and its reinforcing effect in polypropylene composites
- Crystallization behavior of polypropylene/silver nanocomposites using polyethylene glycol as reducing agent and interface modifier
- Physical and mechanical properties of linear low-density polyethylene/cycloolefin copolymer/layered silicate nanocomposite
- Mechanical and rheological properties of polypropylene/bentonite composites with stearic acid as an interface modifier
- Carbon Fiber Composites of Pure Polypropylene and Maleated Polypropylene Blends Obtained from Injection and Compression Moulding
- Improvement of toughness properties of polypropylene/wollastonite composites using an interface modifier
- Mechanical and thermal properties of polypropylene/montmorillonite nanocomposites using stearic acid as both an interface and a clay surface modifier
- Shear effect in beta‐phase induction of polypropylene in a single screw extruder
- Beta phase in polypropylene induced by shear in a single‐screw extruder
- Phase Behaviour of Hydroxypropyl Cellulose/ Polyacrylamide Gels
- Mesophases in a Gel from Hydroxypropyl Cellulose/Polyacrylamide
- EFFECT OF INITIATOR AND CROSS-LINKING AGENT ON A SEMI-IPN OF (PU-STARCH)/PMMA
- Gels from acrylic acid and hydroxypropyl cellulose via free radical polymerization