Professor John Summerscales

Liquid composite molding reproducibility in real-world production of fiber reinforced p...

• Advanced Manufacturing Polymer & Composites Science
• July 2019

Evaluation of Tensile Strength of Fibers Extracted from Banana Peels

• Journal of Natural Fibers
• March 2019

Relationships among the chemical, mechanical and geometrical properties of basalt fibers

• Textile Research Journal
• October 2018

Enhanced rules-of-mixture for natural fibre reinforced polymer matrix(NFRP) composites ...

• Composites Part B Engineering
• October 2018

Technical Note: On modelling thermo-chemical degradation of poly(lactic acid)

• Polymer Degradation and Stability
• December 2016

In-mould gel-coating for polymer composites

• Composites Part A Applied Science and Manufacturing
• December 2016

Ranking of fibre-reinforced composite plate surface finish quality by wavelet texture a...

• Insight - Non-Destructive Testing and Condition Monitoring
• June 2016

A Finite Element Analysis to Validate the Rule-of-Mixtures for the Prediction of the Yo...

• January 2016

Eco-friendly Flax Fibre/Epoxy Resin/Composite System for Surfboard Production

• January 2016

Composites manufacturing for marine structures

• January 2016

Introduction

• January 2016

Bio-based versus traditional polymer composites. A life cycle assessment perspective

• Journal of Cleaner Production
• July 2014

In-mould gel-coating of polymer composites: a review

• Journal of Cleaner Production
• May 2014

Environmental impacts and thermal insulation performance of innovative composite soluti...

• Construction and Building Materials
• March 2014

Microstructural Characterisation of Jute/Epoxy Quasi-Unidirectional Composites

• Applied Composite Materials
• February 2014

Durability of Composites in the Marine Environment

• November 2013

Life Cycle Assessment for Natural Fiber Composites

• October 2013

Characterisation of Natural Fibre Reinforcements and Composites

• Journal of Composites
• January 2013

A review of bast fibres and their composites: Part 3 – Modelling

• Composites Part A Applied Science and Manufacturing
• January 2013

Processes for the production of high-quality composites

• July 2012

Modulus and strength prediction for natural fibre composites

• Materials Science and Technology
• July 2012

Resin Infusion Under Flexible Moulding Technique By In-Mould Gel Coating Using A Flow M...

• Indian Journal Of Applied Research
• October 2011

A fibre diameter distribution factor (FDDF) for natural fibre composites

• Journal of Materials Science
• September 2011

Modelling tensile properties of jute fibres

• Materials Science and Technology
• January 2011

Objective assessment of the surface quality of coated surfaces

• Insight - Non-Destructive Testing and Condition Monitoring
• January 2011

A review of bast fibres and their composites. Part 2 – Composites

• Composites Part A Applied Science and Manufacturing
• October 2010

A review of bast fibres and their composites. Part 1 – Fibres as reinforcements

• Composites Part A Applied Science and Manufacturing
• October 2010

Physical Characterization of Jute Technical Fibers: Fiber Dimensions

• Journal of Natural Fibers
• August 2010

Failure strain as the key design criterion for fracture of natural fibre composites

• Composites Science and Technology
• June 2010

Disposal of composite boats and other marine composites

• January 2010

Energy Use in the Production of Flax Fiber for the Reinforcement of Composites

• Journal of Natural Fibers
• November 2009

Multiple Data Set (MDS) weak-link scaling analysis of jute fibres

• Composites Part A Applied Science and Manufacturing
• November 2009

Tensile properties of jute fibres

• Materials Science and Technology
• October 2009

Life Cycle Impact Assessment of Flax Fibre for the Reinforcement of Composites

• Journal of Biobased Materials and Bioenergy
• September 2009

Design, manufacture, mechanical testing and numerical modelling of an asymmetric compos...

• Composites Part B Engineering
• April 2009

Measurement of permeability of continuous filament mat glass–fibre reinforcements by sa...

• Composites Part A Applied Science and Manufacturing
• May 2007

ACMC/SAMPE Conference on Marine Composites (MarComp) 2003

• Composites Part A Applied Science and Manufacturing
• August 2005

Low-pressure (vacuum infusion) techniques for moulding large composite structures

• Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Desi...
• January 2005

Damage Detection in CFRP Using Wavelet Scale Correlation

• Materials Science Forum
• November 2003

An introduction to wavelet transforms: a tutorial approach

• Insight - Non-Destructive Testing and Condition Monitoring
• May 2003

In-Process Monitoring for Control of ClosedMold Techniques for the Manufacture of Therm...

• April 2003

Effect of elevated temperature on ultimate tensile strength and failure modes of short ...

• Materials Science and Technology
• May 2002

Voronoi cells, fractal dimensions and fibre composites

• Journal of Microscopy
• February 2001

Improving the resin transfer moulding process for fabric-reinforced composites by modif...

• Composites Part A Applied Science and Manufacturing
• December 2000

• Composites Part A Applied Science and Manufacturing
• December 2000

Process-Property-Structure Relationships for Woven Fibre Composites

• January 2000

Open Mold Techniques for Thermoset Composites

• January 2000

• Journal of Materials Science Letters
• January 2000

Review of the durability of marine laminates

• January 1999

Review of the durability of marine laminates

• January 1999

Microstructural Characterisation of Fibre-Reinforced Composites

• August 1998

The use of automated image analysis for the investigation of fabric architecture on the...

• Composites Part A Applied Science and Manufacturing
• July 1998

Microstructural characterisation of fibre-reinforced composites

• January 1998

Quantitive microstructural analysis for continuous fibre composites

• January 1998

A study of the effects of convergent flow fronts on the properties of fibre reinforced ...

• Composites Part A Applied Science and Manufacturing
• January 1998

An investigation into the effects of fabric architecture on the processing and properti...

• Composites Part A Applied Science and Manufacturing
• January 1998

The compression response of fibre-reinforced plastic plates during manufacture by the r...

• Composites Part A Applied Science and Manufacturing
• January 1998

Resin Infusion under Flexible Tooling (RIFT): a review

• Composites Part A Applied Science and Manufacturing
• January 1996

Data validation procedures for the automated determination of the two-dimensional perme...

• Composites Part A Applied Science and Manufacturing
• January 1996

Relationship between mechanical performance and microstructure in composites fabricated...

• Composites
• September 1995

The effect of microstructure on flow promotion in resin transfer moulding reinforcement...

• Journal of Microscopy
• March 1995

The compressibility of a reinforcement fabric

• Composites Manufacturing
• January 1995

Quantitative microstructural examination of RTM fabrics designed for enhanced flow

• Composite Structures
• January 1995

The effect of reinforcement architecture on the long-range flow in fibrous reinforcements

• Composites Manufacturing
• January 1995

Poisson's ratio in fibre-reinforced polymer composites with a high void content

• Journal of Materials Science Letters
• January 1994

Microstructural image analysis applied to fibre composite materials: a review

• Composites
• July 1993

Comment on “quantitative evaluation of fiber distributions in a continuously reinforced...

• Materials Characterization
• June 1993

Effect of processing dwell-time on the microstructure of a fibre-reinforced composite

• Journal of Microscopy
• February 1993

A model for the effect of fibre clustering on the flow rate in resin transfer moulding

• Composites Manufacturing
• January 1993

Acoustic emission testing of the structural integrity of multicore cable

• NDT & E International
• December 1991

Acoustic Emission Source Location in Bidirectionally Reinforced Composites Part 1: Sour...

• January 1988

Poisson's ratios in glass fibre reinforced plastics

• Composite Structures
• January 1988

Shear Modulus Testing of Composites

• January 1987

ACOUSTIC EMISSION SOURCE LOCATION IN BIDIRECTIONALLY REINFORCED COMPOSITES, PART 2: WAV...

• January 1987

Strain Gauges on Glass Fibre Reinforced Polyester Laminates

• January 1985

Amplitude distribution acoustic emission signatures of unidirectional fibre composite h...

• Composites
• July 1984

WOVEN GLASS-FIBRE REINFORCED POLYESTER-RESIN COMPOSITES EXPOSED TO THE MARINE ENVIRONMENT

• January 1983

Hybrids — a review

• Composites
• January 1980

Hybrids-a review

• Composites
• October 1979

Carbon fibre and glass fibre hybrid reinforced plastics

• Composites
• July 1978