All Stories

  1. On the temperatures developed in CFRP drilling using uncoated WC-Co tools Part II: Nanomechanical study of thermally aged CFRP composites

    Article • Composite Structures, May 2015, Elsevier

    Professor Alma Hodzic

  2. On the temperatures developed in CFRP drilling using uncoated WC-Co tools Part I: Workpiece constituents, cutting speed and heat dissipation

    Article • Composite Structures, May 2015, Elsevier

    Professor Alma Hodzic

  3. Investigation of the mechanical properties and fracture morphology of glass ceramic fibers

    Article • Advanced Manufacturing Polymer & Composites Science, April 2015, Taylor & Francis

    Professor Alma Hodzic

  4. Advanced Manufacturing: Polymer & Composites Science – The Second Issue

    Article • Advanced Manufacturing Polymer & Composites Science, April 2015, Taylor & Francis

    Professor Alma Hodzic

  5. Advanced Manufacturing: Polymer & Composites Science–The First Issue

    Article • Advanced Manufacturing Polymer & Composites Science, January 2015, Taylor & Francis

    Professor Alma Hodzic

  6. Environmental impact assessment of aviation emission reduction through the implementation of composite materials

    Article • The International Journal of Life Cycle Assessment, November 2014, Springer Science + Business Media

    Professor Alma Hodzic

  7. Fabrication of patterned thermoplastic microphases between composite plies by inkjet printing

    Article • Journal of Composite Materials, May 2014, SAGE Publications

    Professor Alma Hodzic

  8. Micro-Mechanical Parameters in Short Fibre Composite

    Article • Applied Composite Materials, January 2014, Springer Science + Business Media

    Professor Alma Hodzic, Mariam AlAli AlMaadeed

  9. The applicability of Taylor's model to the drilling of CFRP using uncoated WC-Co tools: the influence of cutting speed on tool wear

    Article • International Journal of Machining and Machinability of Materials, January 2014, Inderscience Publishers

    Professor Alma Hodzic

  10. Contributor contact details

    Article • January 2014, Elsevier

    Professor Alma Hodzic

  11. Improvements in carbon fibre reinforced composites by inkjet printing of thermoplastic polymer patterns

    Article • physica status solidi (RRL) - Rapid Research Letters, November 2013, Wiley

    Professor Alma Hodzic

  12. A Celebration of the Work of Professor Tony Kelly ScD FRS FREng PhD CBE DL

    Article • Applied Composite Materials, October 2013, Springer Science + Business Media

    Professor Alma Hodzic

  13. Influence of additives on recycled polymer blends

    Article • Journal of Thermal Analysis and Calorimetry, June 2013, Springer Science + Business Media

    Professor Alma Hodzic

  14. Plastics recycling: insights into life cycle impact assessment methods

    Article • Plastics Rubber and Composites Macromolecular Engineering, February 2013, Taylor & Francis

    Professor Alma Hodzic

  15. Compressive behaviour of nanoclay modified aerospace grade epoxy polymer

    Article • Plastics Rubber and Composites Macromolecular Engineering, July 2012, Taylor & Francis

    Professor Alma Hodzic, Aidah JUmahat

  16. Review of life cycle assessment on polyolefins and related materials

    Article • Plastics Rubber and Composites Macromolecular Engineering, June 2012, Taylor & Francis

    Professor Alma Hodzic

  17. Impact damage characterisation of composite laminates using a statistical approach

    Article • Composites Science and Technology, June 2012, Elsevier

    Professor Alma Hodzic

  18. Environmental impact assessment of composites containing recycled plastics

    Article • Resources Conservation and Recycling, March 2012, Elsevier

    Professor Alma Hodzic, Mariam AlAli AlMaadeed

  19. EDITORIAL The Implementation of Composite Materials in Engineering Structures where Total Safety is of the Essence

    Article • Applied Composite Materials, February 2012, Springer Science + Business Media

    Professor Alma Hodzic

  20. Influence of Implementation of Composite Materials in Civil Aircraft Industry on reduction of Environmental Pollution and Greenhouse Effect

    Article • IOP Conference Series Materials Science and Engineering, December 2011, Institute of Physics Publishing

    Professor Alma Hodzic

  21. Learning from each other: engaging engineering students through their cultural capital

    Article • Engineering Education, December 2011, The Higher Education Academy

    Professor Alma Hodzic

  22. Modelling the structural response of GLARE panels to blast load

    Article • Composite Structures, December 2011, Elsevier

    Professor Alma Hodzic

  23. The Behaviour of Naturally Debonded Composites Due to Bending Using a Meso-Level Model

    Article • Applied Composite Materials, November 2011, Springer Science + Business Media

    Professor Alma Hodzic

  24. On impact damage detection and quantification for CFRP laminates using structural response data only

    Article • Mechanical Systems and Signal Processing, November 2011, Elsevier

    Professor Alma Hodzic

  25. Development of recycled polymer composites for structural applications

    Article • Plastics Rubber and Composites Macromolecular Engineering, September 2011, Taylor & Francis

    Professor Alma Hodzic

  26. Blast Resistance and Damage Modelling of Fibre Metal Laminates to Blast Loads

    Article • Applied Composite Materials, September 2011, Springer Science + Business Media

    Professor Alma Hodzic

  27. Characterisation of thermo-mechanical properties of MgO–Al2O3–SiO2 glass ceramic with different heat treatment temperatures

    Article • Journal of Materials Science, September 2011, Springer Science + Business Media

    Professor Alma Hodzic

  28. An Overview of Solid Waste Management and Plastic Recycling in Qatar

    Article • Journal of Polymers and the Environment, July 2011, Springer Science + Business Media

    Professor Alma Hodzic, Mariam AlAli AlMaadeed

  29. Life Cycle Assessment of Particulate Recycled Low Density Polyethylene and Recycled Polypropylene Reinforced with Talc and Fiberglass

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor Alma Hodzic, Mariam AlAli AlMaadeed

  30. A review on composite materials based on recycled thermoplastics and glass fibres

    Article • Plastics Rubber and Composites Macromolecular Engineering, February 2011, Taylor & Francis

    Professor Alma Hodzic

  31. The Use of Layered Composites for Passive Vibration Damping

    Article • January 2011, Springer Science + Business Media

    Professor Alma Hodzic

  32. Effect of silica nanoparticles on compressive properties of an epoxy polymer

    Article • Journal of Materials Science, June 2010, Springer Science + Business Media

    Professor Alma Hodzic, Aidah JUmahat

  33. A Graphical Method Predicting the Compressive Strength of Toughened Unidirectional Composite Laminates

    Article • Applied Composite Materials, June 2010, Springer Science + Business Media

    Professor Alma Hodzic, Aidah JUmahat

  34. A SEM-Based Study of Structural Impact Damage

    Article • Applied Mechanics and Materials, June 2010, Trans Tech Publications

    Professor Alma Hodzic

  35. Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading

    Article • Composite Structures, January 2010, Elsevier

    Professor Alma Hodzic, Aidah JUmahat

  36. Bagasse Fibre for Sustainable Manufacturing

    Article • Journal of Biobased Materials and Bioenergy, December 2007, American Scientific Publishers

    Professor Alma Hodzic

  37. Effect of additives on the interfacial strength of poly(l-lactic acid) and poly(3-hydroxy butyric acid)-flax fibre composites

    Article • Composites Science and Technology, September 2007, Elsevier

    Professor Alma Hodzic, Professor Robert A Shanks

  38. Design and Optimization of Biopolyester Bagasse Fiber Composites

    Article • Journal of Biobased Materials and Bioenergy, April 2007, American Scientific Publishers

    Professor Alma Hodzic

  39. Composites of poly(lactic acid) with flax fibers modified by interstitial polymerization

    Article • Journal of Applied Polymer Science, January 2006, Wiley

    Professor Alma Hodzic, Professor Robert A Shanks

  40. Bacterial Polyester-Based Biocomposites

    Article • April 2005, Taylor & Francis

    Professor Alma Hodzic

  41. Tensile creep behaviour of polypropylene fibre reinforced polypropylene composites

    Article • Polymer Testing, April 2005, Elsevier

    Professor Alma Hodzic, Professor Robert A Shanks

  42. Re- use, recycling and degradation of composites

    Article • March 2005, Taylor & Francis

    Professor Alma Hodzic

  43. Back Cover: Macromol. Mater. Eng. 1/2005

    Article • Macromolecular Materials and Engineering, January 2005, Wiley

    Professor Alma Hodzic, Professor Robert A Shanks

  44. Influence of Different Woven Geometry in Poly(propylene) Woven Composites

    Article • Macromolecular Materials and Engineering, January 2005, Wiley

    Professor Alma Hodzic, Professor Robert A Shanks

  45. Composites of poly(lactic acid) with flax fibers modified by interstitial polymerization

    Article • Journal of Applied Polymer Science, January 2005, Wiley

    Professor Alma Hodzic, Professor Robert A Shanks

  46. The effect of fiber concentration on mechanical and thermal properties of fiber-reinforced polypropylene composites

    Article • Journal of Applied Polymer Science, January 2005, Wiley

    Professor Alma Hodzic, Professor Robert A Shanks

  47. The effects of water aging on the interphase region and interlaminar fracture toughness in polymer–glass composites

    Article • Composites Science and Technology, October 2004, Elsevier

    Professor Alma Hodzic, Chair Professor Jang Kyo Kim

  48. Interfacial improvements in poly(3-hydroxybutyrate)-flax fibre composites with hydrogen bonding additives

    Article • Composites Science and Technology, July 2004, Elsevier

    Professor Alma Hodzic, Professor Robert A Shanks

  49. Mechanical Behavior and Fracture Toughness of Poly(L-lactic acid)-Natural Fiber Composites Modified with Hyperbranched Polymers

    Article • Macromolecular Materials and Engineering, May 2004, Wiley

    Professor Alma Hodzic, Professor Robert A Shanks

  50. Re-use, recycling and degradation of composites

    Article • January 2004, Elsevier

    Professor Alma Hodzic

  51. Interfacial Properties of Polypropylene Fibre–Matrix Composites

    Article • January 2004, Elsevier

    Professor Alma Hodzic

  52. Effect of Fibre-Orientation on Mechanical Properties of Polypropylene Composites

    Article • January 2004, Elsevier

    Professor Alma Hodzic

  53. Morphological and grafting modification of natural cellulose fibers

    Article • Journal of Applied Polymer Science, January 2004, Wiley

    Professor Alma Hodzic, Professor Robert A Shanks

  54. Poly(L-lactic acid) composites with flax fibers modified by plasticizer absorption

    Article • Polymer Engineering & Science, September 2003, Wiley

    Professor Alma Hodzic, Professor Robert A Shanks

  55. Nanoscale characterisation of thickness and properties of interphase in polymer matrix composites

    Article • The Journal of Adhesion, April 2003, Taylor & Francis

    Chair Professor Jang Kyo Kim, Professor Alma Hodzic

  56. Thermoplastic biopolyester natural fiber composites

    Article • Journal of Applied Polymer Science, January 2003, Wiley

    Professor Alma Hodzic, Professor Robert A Shanks

  57. Properties of Poly(3-hydroxybutyric acid) Composites with Flax Fibres Modified by Plasticiser Absorption

    Article • Macromolecular Materials and Engineering, November 2002, Wiley

    Professor Alma Hodzic, Professor Robert A Shanks

  58. Properties of Poly(3-hydroxybutyric acid) Composites with Flax Fibres Modified by Plasticiser Absorption

    Article • Macromolecular Materials and Engineering, October 2002, Wiley

    Professor Alma Hodzic, Professor Robert A Shanks

  59. Nano-indentation and nano-scratch of polymer/glass interfaces. II: model of interphases in water aged composite materials

    Article • Polymer, June 2001, Elsevier

    Professor Alma Hodzic, Chair Professor Jang Kyo Kim

  60. Droplet on a fibre: Surface tension and geometry

    Article • Composite Interfaces, January 2001, Taylor & Francis

    Professor Alma Hodzic

  61. Application of nano-indentation, nano-scratch and single fibre tests in investigation of interphases in composite materials

    Article • Micron, January 2001, Elsevier

    Professor Alma Hodzic, Chair Professor Jang Kyo Kim

  62. Nano-indentation of polymer–glass interfaces Part I. Experimental and mechanical analysis

    Article • Polymer, August 2000, Elsevier

    Professor Alma Hodzic, Chair Professor Jang Kyo Kim

  63. The microdroplet test: experimental and finite element analysis of the dependance of failure mode on droplet shape

    Article • Composite Interfaces, January 1998, Taylor & Francis

    Professor Alma Hodzic