All Stories

  1. Prediction of the properties of sintered copper-graphite composites using response surface methodology

    Article • PLOS One, September 2026, PLOS

    Dr. Jitendra Kumar Katiyar

  2. Machine learning models for predicting the hardness of additively manufactured Polymethyl Methacrylate (PMMA) parts for biomedical applications

    Article • PLOS One, August 2026, PLOS

    Dr. Jitendra Kumar Katiyar

  3. Influence of aging process on microstructure and mechanical characteristics of heat-treated HSLA alloy steels

    Article • Results in Surfaces and Interfaces, August 2026, Elsevier

    Dr. Jitendra Kumar Katiyar

  4. Effect of sliding distance and load on wear and friction characteristics of bi-directional carbon fiber epoxy nanocomposites

    Article • Nanocomposites, August 2026, Taylor & Francis

    Dr. Jitendra Kumar Katiyar

  5. Mechanical and tribological performance of bi-directional carbon fiber/graphene reinforced epoxy nanocomposite

    Article • Nanocomposites, July 2026, Taylor & Francis

    Dr. Jitendra Kumar Katiyar

  6. High temperature sliding wear performance of 3D printed biocomposites: An integrated mathematical approach for optimal material selection

    Article • Results in Surfaces and Interfaces, May 2026, Elsevier

    Dr. Jitendra Kumar Katiyar

  7. Data-driven framework for prediction of abrasive wear performance of recycled thermoplastic-based biocomposites

    Article • Journal of Materials Research, April 2026, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  8. Synergistic effect of ferrous sulphide and MWCNT on wear behaviour of HVOF-sprayed nickel/graphite composite coatings

    Article • Journal of Materials Research and Technology, March 2026, Elsevier

    Dr. Jitendra Kumar Katiyar

  9. Wear behavior of yttria‐stabilized zirconia reinforced scrap‐derived aluminium matrix composites via ultrasonic‐assisted stir squeeze casting

    Article • Materialwissenschaft und Werkstofftechnik, January 2026, Wiley

    Dr. Jitendra Kumar Katiyar

  10. Wear and corrosion performance of nickel phosphorous/nickel boron nano composite duplex coating

    Article • Tribology International, December 2025, Elsevier

    Dr. Jitendra Kumar Katiyar

  11. 3D-printed sustainable biocomposites via valorization of biomass: focus on challenges and their future perspectives

    Article • Environmental Science and Pollution Research, November 2025, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  12. Optimizing EDM of Gunmetal with Al2O3-Enhanced Dielectric: Experimental Insights and Machine Learning Models

    Article • Materials, October 2025, MDPI AG

    Dr. Jitendra Kumar Katiyar

  13. Impact of Process Parameters on Hardness of Melt Fabricated PA6 Carbon Fiber-Reinforced Composites and Prediction of Properties Using Machine Learning

    Article • Journal of Materials Engineering and Performance, May 2025, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  14. Physico-tribo-mechanical Performance of Banana Peel Powder Reinforced PLA-based 3D printed Biocomposites

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, May 2025, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  15. Optimizing the tribological parameters of Fe/ZrO 2 composite

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, May 2025, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  16. Advanced tribological solutions for sustainable future

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, February 2025, SAGE Publications

    Professor Giuseppe Pintaude, Dr. Jitendra Kumar Katiyar

  17. Development of cost-effective, high-performance ceramic-metallic brake pads for agricultural tractors

    Article • Tribology - Materials Surfaces & Interfaces, January 2025, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  18. Prediction of frictional behaviour through regression equations: A statistical modelling approach validated with machine learning

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, November 2024, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  19. Dry sliding wear behaviour of AA6082/BN/Mos 2 hybrid metal matrix composites synthesized using stir casting process

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, November 2024, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  20. Microstructural, mechanical, and wear properties of ultrasonic assisted stir casted A356 Alloy/AlN composite

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, November 2024, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  21. A Comprehensive Review on the Tribological Evaluation of Polyether Ether Ketone Pristine and Composite Coatings

    Article • Polymers, October 2024, MDPI AG

    Dr. Jitendra Kumar Katiyar

  22. Influence of 2D solid lubricants on mechanical and tribological behaviour of Al 7XXX series metal matrix composites: A comprehensive review

    Article • Tribology - Materials Surfaces & Interfaces, July 2024, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  23. Influence of varying matrix/fiber concentration on mechanical properties of bi-directional carbon fiber reinforced polymer composite

    Article • Journal of Reinforced Plastics and Composites, July 2024, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  24. Optimizing surface finish in FDM-printed polycarbonate spur gears through abrasive flow finishing: insights from physics and material science perspectives

    Article • Physica Scripta, July 2024, Institute of Physics Publishing

    Dr. Jitendra Kumar Katiyar

  25. Influence of tool velocity ratio on force-torque and mechanical properties of friction stir welded 2050-T84 Al-Li alloy plates

    Article • Physica Scripta, June 2024, Institute of Physics Publishing

    Dr. Jitendra Kumar Katiyar

  26. Tribo-corrosion and mechanical performance of electro-deposited nano-composite h-BN/epoxy coating

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, May 2024, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  27. State-of-the-Art on Advancements in Carbon–Phenolic and Carbon–Elastomeric Ablatives

    Article • Polymers, May 2024, MDPI AG

    Dr. KAUSHIK KUMAR, Dr. Jitendra Kumar Katiyar

  28. Optimization of tribological performance of TiB2-reinforced Al6063 composite using grey-fuzzy tool

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, April 2024, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  29. Investigation of physical, mechanical, tribological and biodegradable properties of hybrid natural fibre reinforced polymer composite

    Article • Tribology - Materials Surfaces & Interfaces, April 2024, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  30. A comparative study of original equipment manufacturer brake pads using tribological testing and hybrid ranking for enhanced decision making and cost effectiveness

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, January 2024, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  31. Tribological, Mechanical and Surface Characterization of Basalt Fiber Composite with/without Surface Modification

    Article • January 2024, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  32. Tribo-mechanical performance of brake composite material: A comprehensive review

    Article • Tribology - Materials Surfaces & Interfaces, December 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar , Professor Alessandro Ruggiero

  33. State-of-the-art on microstructural, mechanical and tribological properties of friction stir processed aluminium 2xxx series alloy

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, November 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  34. Tribological, mechanical, and metallurgical performance of natural fiber-reinforced composites: A comprehensive review

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, November 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  35. Optimisation of process parameters for dimensional stability in FDM

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, October 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  36. A critical review of different properties of natural fibre-reinforced composites

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, September 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  37. A numerical study on the impact of lubricant rheology and surface topography on heavily loaded non-conformal contacts

    Article • Surface Topography Metrology and Properties, July 2023, Institute of Physics Publishing

    Dr. Jitendra Kumar Katiyar

  38. Influence of nano graphene addition on mechanical properties of Bi-directional carbon fabric based epoxy composites

    Article • Journal of Elastomers & Plastics, July 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  39. Influence of tool pin profiles on waviness and natural frequency during friction stir welding of Al-Li alloys plates

    Article • Surface Topography Metrology and Properties, May 2023, Institute of Physics Publishing

    Dr. Jitendra Kumar Katiyar

  40. Comparative study of sintered and composite brake pad for wind turbine applications

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, April 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  41. Sustainable tribology for reliability and efficiency

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, April 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  42. State-of-the-art hybrid-assisted machining processes of nickel-based superalloys

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, March 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  43. Prediction of heat generation effect on force torque and mechanical properties at varying tool rotational speed in friction stir welding using Artificial Neural Network

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, February 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  44. State-of-the-Art in Sustainable Machining of Different Materials Using Nano Minimum Quality Lubrication (NMQL)

    Article • Lubricants, February 2023, MDPI AG

    Dr. Jitendra Kumar Katiyar

  45. Shear rate dependent static friction between a wet granular layer and hard surface

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, January 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  46. A review of additives in abrasive water jet machining and their performance

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, December 2022, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  47. State of the art on challenges for friction material manufacturers – raw materials, regulations, environmental, and NVH aspects

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, November 2022, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  48. Prediction of friction coefficient of su-8 and its composite coatings using machine learning techniques

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, November 2022, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  49. Tribological behaviour of stir casted hybrid-Al metal matrix composites using Taguchi technique

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, October 2022, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  50. A novel conjugate heat transfer approach to determine the temperature distribution in single-point cutting tool under different conditions

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, September 2022, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  51. Multi-response optimization and effect of tool rotation on micromachining of PMMA using an in-house developed µ-ECDM system

    Article • CIRP Journal of Manufacturing Science and Technology, August 2022, Elsevier

    Dr. Jitendra Kumar Katiyar

  52. Influence of hexagonal boron nitride additive nanocutting fluid on the machining of AA6061-T6 alloy using minimum quality lubrication

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, June 2022, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  53. Research on tribological performance of piston ring/liner conjunction considering non-Gaussian roughness and cavitation

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, June 2022, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  54. Exemplary approach using tool rotation-assisted µ-ECDM for CFRP composites machining

    Article • Materials and Manufacturing Processes, May 2022, Taylor & Francis

    Dr. Jitendra Kumar Katiyar

  55. Influence of engineering tribology on society

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, April 2022, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  56. In-process monitoring of distortion and temperature in multi-layer laser cladding of Stellite 6 and Inconel 718 alloys

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, April 2022, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  57. Optimization of tribological process parameters of titanium carbide reinforced copper matrix composites

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, March 2022, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  58. Influence of tool rotational speed on Microstructure and Mechanical Properties of Al-Li Alloy using Friction Stir Welding

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, February 2022, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  59. State of the art on sustainable manufacturing using mono/hybrid nano-cutting fluids with minimum quantity lubrication

    Article • Materials and Manufacturing Processes, February 2022, Taylor & Francis

    Dr. Jitendra Kumar Katiyar

  60. Impact of Tribology on society

    Article • Tribology - Materials Surfaces & Interfaces, January 2022, Taylor & Francis

    Dr. Jitendra Kumar Katiyar

  61. Physical, tribological and mechanical properties of polymer composite coating on silicon wafer

    Article • Tribology International, January 2022, Elsevier

    Dr. Jitendra Kumar Katiyar

  62. Guest editorial

    Article • Industrial Lubrication and Tribology, December 2021, Emerald

    Dr. Jitendra Kumar Katiyar

  63. Effect of heat treatment environment on the structural characteristics and microhardness of high velocity oxy‐fuel sprayed tungsten carbide‐cobalt coatings

    Article • Materialwissenschaft und Werkstofftechnik, December 2021, Wiley

    Dr. Jitendra Kumar Katiyar

  64. Adhesive and normal stress-dependent dynamic friction of a gelatin hydrogel

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, October 2021, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  65. Multi-Response Optimization of cutting parameters in MQL assisted Turning of Haynes 25 alloy with Taguchi based Grey Relational Analysis

    Article • Journal of Engineering Research, September 2021, Elsevier

    Dr. Jitendra Kumar Katiyar

  66. Effect of multi-layer laser cladding of Stellite 6 and Inconel 718 materials on clad geometry, microstructure evolution and mechanical properties

    Article • Materials Today Communications, September 2021, Elsevier

    Dr. Jitendra Kumar Katiyar

  67. Optimization of tribo-mechanical properties of boron carbide reinforced magnesium metal matrix composite

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, July 2021, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  68. A Novel Fluid–Structure Interaction (FSI) Modeling Approach to Predict the Temperature Distribution in Single-Point Cutting Tool for Condition Monitoring During Turning Process

    Article • Arabian Journal for Science and Engineering, June 2021, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  69. Mechanical properties of MWCNTs and graphene nanoparticles modified glass fibre-reinforced polymer nanocomposite

    Article • Bulletin of Materials Science, June 2021, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  70. Measurements of lattice strain in cold-rolled CR4 steel sheets using X-ray diffraction

    Article • Materials Science and Engineering B, February 2021, Elsevier

    Dr. Jitendra Kumar Katiyar

  71. Novel application of graphite-talc hybrid nanoparticle enriched cutting fluid in turning operation

    Article • Journal of Manufacturing Processes, February 2021, Elsevier

    Dr. Jitendra Kumar Katiyar

  72. Influence of buffer layer on surface and tribomechanical properties of laser cladded Stellite 6

    Article • Materials Science and Engineering B, January 2021, Elsevier

    Dr. Jitendra Kumar Katiyar

  73. Molecular Combustion Properties of Nanoscale Aluminum and Its Energetic Composites: A Short Review

    Article • ACS Omega, December 2020, American Chemical Society (ACS)

    Dr. Jitendra Kumar Katiyar , Dr. Sanjeev Kumar

  74. Effect of friction modifiers compositions on tribological properties of Cu-Sn alloy/Al2O3 brake composite material

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, November 2020, SAGE Publications

    Dr. Jitendra Kumar Katiyar

  75. Experimental investigations on laser cladding of NiCrBSi + WC coating on SS410

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr. Jitendra Kumar Katiyar

  76. Energy Efficient Graphene Based Nano-composite Grease

    Article • January 2020, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  77. Introduction and Applications of Tribology

    Article • January 2020, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  78. Rheological Behaviour of Hybrid Nanofluids: A Review

    Article • January 2020, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  79. Tribo-mechanical Aspects in Micro-electro Mechanical Systems (MEMS)

    Article • January 2020, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  80. Tribo-mechanical properties of graphite/talc modified polymer composite bearing balls

    Article • Materials Research Express, December 2019, Institute of Physics Publishing

    Dr. Jitendra Kumar Katiyar

  81. Experimental analysis of mechanical properties of stir casted aluminium-graphene nanocomposites

    Article • IOP Conference Series Materials Science and Engineering, November 2019, Institute of Physics Publishing

    Sandipan Roy, Dr. Jitendra Kumar Katiyar

  82. Experimental analysis of mechanical and structural properties of hybrid aluminium (7075) matrix composite using stir casting method

    Article • IOP Conference Series Materials Science and Engineering, November 2019, Institute of Physics Publishing

    Dr. Jitendra Kumar Katiyar

  83. Tribological analysis of tip-cantilever made of SU-8, talc and PFPE composite

    Article • Tribology - Materials Surfaces & Interfaces, October 2019, Taylor & Francis

    Dr. Jitendra Kumar Katiyar

  84. Effect of azobis-isobutyronitrile propellant loading and nanoscaling of CuO on combustion performance of CuO/Al nanoenergetic materials

    Article • Materials Research Express, October 2019, Institute of Physics Publishing

    Dr. Jitendra Kumar Katiyar

  85. Physicomechanical and abrasive wear properties of hemp/Kevlar/carbon reinforced hybrid epoxy composites

    Article • Materials Research Express, September 2019, Institute of Physics Publishing

    Dr. Jitendra Kumar Katiyar

  86. Tribological investigation of r-GO additived biodegradable cashew nut shells liquid as an alternative industry lubricant

    Article • Tribology International, July 2019, Elsevier

    Dr. Jitendra Kumar Katiyar

  87. Tribology of Polymer

    Article • Friction, May 2019, Tsinghua University Press

    Dr. Jitendra Kumar Katiyar , Jitendra Kumar Katiyar

  88. Physico-Tribo-Mechanical and Adhesion Behaviour of Plasma Treated Steel and Its Alloys: A Critical Review

    Article • Reviews of Adhesion and Adhesives, March 2019, Scrivener Publishing

    Dr. Jitendra Kumar Katiyar

  89. Automotive Tribology

    Article • January 2019, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  90. Nano-energetic Materials on a Chip

    Article • November 2018, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  91. Solid Energetic Materials-Based Microthrusters for Space Applications

    Article • November 2018, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  92. Physico-mechanical and wear properties of novel sustainable sour-weed fiber reinforced polyester composites

    Article • Materials Research Express, April 2018, Institute of Physics Publishing

    Dr. Jitendra Kumar Katiyar

  93. Influence of alumina/MWCNT hybrid nanoparticle additives on tribological properties of lubricants in turning operations

    Article • Friction, April 2018, Tsinghua University Press

    Sandipan Roy, Dr. Jitendra Kumar Katiyar

  94. Synthesis of iron-copper alloy using electrical discharge machining

    Article • Materials and Manufacturing Processes, January 2018, Taylor & Francis

    Dr. Jitendra Kumar Katiyar

  95. A comparative study of tribological and mechanical properties of composite polymer coatings on bearing steel

    Article • International Journal of Surface Science and Engineering, January 2018, Inderscience Publishers

    Dr. Jitendra Kumar Katiyar

  96. Physiochemical Properties of Hexagonal Boron Nitride Blended Coconut Oil

    Article • SSRN Electronic Journal, January 2018, Elsevier

    Dr. Jitendra Kumar Katiyar

  97. Lubrication Mechanism of SU-8/Talc/PFPE Composite

    Article • Tribology Letters, May 2017, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  98. Friction and wear durability study of epoxy-based polymer (SU-8) composite coatings with talc and graphite as fillers

    Article • Wear, September 2016, Elsevier

    Dr. Jitendra Kumar Katiyar

  99. In Situ Lubrication of SU-8/Talc Composite with Base Oil (SN150) and Perfluoropolyether as Fillers

    Article • Tribology Letters, August 2016, Springer Science + Business Media

    Dr. Jitendra Kumar Katiyar

  100. Effects of carbon fillers on the tribological and mechanical properties of an epoxy-based polymer (SU-8)

    Article • Tribology - Materials Surfaces & Interfaces, January 2016, Taylor & Francis

    Dr. Jitendra Kumar Katiyar

  101. Effect of Graphite Concentration on the Tribological and Mechanical Properties of Filled SU-8 Polymer

    Article • Tribology Online, January 2016, Japanese Society of Tribologists

    Dr. Jitendra Kumar Katiyar

  102. Investigating the Effects of Varying Proportions of Waxes in Wax Mix on Surface Roughness and Optimization by Taguchi Method

    Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

    Dr. Jitendra Kumar Katiyar