All Stories

  1. A novel model based on asperities contact for the assessment of tribocorrosive wear in marine applications

    Article • Journal of Tribology, February 2026, ASME International

    Professor Alessandro Ruggiero

  2. A Fractal Rough surfaces’ Mixed Lubrication model considering Boundary Element Method deformation

    Article • Tribology International, February 2026, Elsevier

    Professor Alessandro Ruggiero

  3. Vibration-Based Diagnostics of Rolling Element Bearings Using the Independent Component Analysis (ICA) Method

    Article • Sensors, December 2025, MDPI AG

    Professor Alessandro Ruggiero

  4. Simulating the Transient Dynamics of Line-Contact Elasto-Hydrodynamic Lubricated Systems by Solving a Differential Algebraic Equation Set

    Article • Journal of Tribology, November 2025, ASME International

    Professor Alessandro Ruggiero

  5. A Straightforward IMU-Based Upper Limb Inverse Kinematics Compared with Open-Source Vision Algorithms

    Article • October 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  6. Application of Blind Source Separation Methods in the Diagnosis of Rolling Bearings

    Article • June 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  7. Effective and Simple Identification Indicators of Different Rolling Bearing Fault Types

    Article • June 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  8. Methodology for Assessing Aircraft Tire Wear

    Article • June 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  9. Fast approximation of matrix exponential and its application to independent component analysis problem

    Article • Advances in Science and Technology – Research Journal, March 2025, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Professor Alessandro Ruggiero

  10. A stochastic and microscopic model to predict road traffic noise by random generation of single vehicles' speeds

    Article • The Journal of the Acoustical Society of America, February 2025, Acoustical Society of America (ASA)

    Professor Alessandro Ruggiero

  11. Numerical Evaluation of Micromotions and Wear of Two Different Dental Implants in Case of Isotropic and Anisotropic Human Jaw

    Article • January 2025, Springer Science + Business Media

    Professor Alessandro Ruggiero

  12. Tribocorrosion of couplings in seawater environment: An investigation on the positive-negative role of synergy

    Article • Tribology International, December 2024, Elsevier

    Professor Alessandro Ruggiero

  13. Biocompatibility and mechanical performance of magnesium alloys for biomedical application- a state of the art review

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, September 2024, SAGE Publications

    Professor Alessandro Ruggiero

  14. 2D materials for Tribo-corrosion and -oxidation protection: A review

    Article • Advances in Colloid and Interface Science, September 2024, Elsevier

    Professor Alessandro Ruggiero

  15. The Effect of Chemical Composition of Biological Solutions on the Tribocorrosive Behavior and Synergistic Wear of Titanium Grade V Alloys for Biomedical Applications

    Article • Journal of Bio- and Tribo-Corrosion, June 2024, Springer Science + Business Media

    Professor Alessandro Ruggiero

  16. Tribocorrosion of 3D printed dental implants: An overview

    Article • Journal of Taibah University Medical Sciences, June 2024, Elsevier

    Professor Alessandro Ruggiero

  17. Tribocorrosion experimental investigation on Ti6Al4V burnished samples used for hip joint replacement

    Article • Tribology - Materials Surfaces & Interfaces, June 2024, SAGE Publications

    Professor Alessandro Ruggiero

  18. A Critical Review of Human Jaw Biomechanical Modeling

    Article • Applied Sciences, April 2024, MDPI AG

    Professor Alessandro Ruggiero

  19. On the Use of Taguchi Method in the Analysis of the Dynamic Response of Variable Bearing Design under Impact Load

    Article • Advances in Tribology, January 2024, Wiley

    Assoc. Prof. Dr. Mohammed N. Abdulrazaq, Professor Alessandro Ruggiero

  20. Analysis of the Dynamic Response of Variable Bearing Design Under Impact Load Using Taguchi Method

    Article • January 2024, Springer Science + Business Media

    Professor Alessandro Ruggiero

  21. Experimental Analysis of Different Dental Implants Surfaces by Using Optical Methods

    Article • January 2024, Springer Science + Business Media

    Professor Alessandro Ruggiero

  22. From Marker Trajectories to Muscular Activations: A Musculoskeletal Multibody Model Considering Compliant Tendon Behaviour

    Article • January 2024, Springer Science + Business Media

    Professor Alessandro Ruggiero

  23. On the Tribological Performance of Vegetable Lubricants: Experimental Investigation on Rice Bran Oil with Propyl Gallate

    Article • January 2024, Springer Science + Business Media

    Professor Alessandro Ruggiero

  24. Proceedings of ITS-IFToMM 2024

    Article • January 2024, Springer Science + Business Media

    Professor Alessandro Ruggiero, Enrico Ciulli

  25. Tribocorrosive Analysis of Titanium Grade V in Different Biological Solutions

    Article • January 2024, Springer Science + Business Media

    Professor Alessandro Ruggiero

  26. Tribological Behaviour of PLA Composites with Different Natural Fibers and Degradation Mechanisms

    Article • January 2024, Springer Science + Business Media

    Professor Alessandro Ruggiero

  27. Tribo-mechanical performance of brake composite material: A comprehensive review

    Article • Tribology - Materials Surfaces & Interfaces, December 2023, SAGE Publications

    Dr. Jitendra Kumar Katiyar , Professor Alessandro Ruggiero

  28. Experimental investigation on the bio-tribocorrosive behavior of Ti6Al4V alloy and 316 L stainless steel in two biological solutions

    Article • Tribology International, December 2023, Elsevier

    Professor Alessandro Ruggiero

  29. On the Biotribological Surfaces of Dental Implants: Investigation in the Framework of Osseointegration

    Article • Biotribology, December 2023, Elsevier

    Professor Alessandro Ruggiero

  30. In Silico Mixed Lubrication Model to Evaluate the Radial Clearance Influence on the Tribology of Total Hip Replacement

    Article • November 2023, Springer Science + Business Media

    Professor Alessandro Ruggiero

  31. Investigating the optimal design of all-on-four technique adopting finite element analysis: the aspect of framework material, kind and position of implants

    Article • Biomedical Engineering Advances, November 2023, Elsevier

    Professor Alessandro Ruggiero

  32. An Investigation on the Teeth Crowning Effects on the Transient EHL Performance of Large-Scale Wind Turbine Spur Gears

    Article • Lubricants, October 2023, MDPI AG

    Professor Alessandro Ruggiero

  33. Stress-strain and fatigue life numerical evaluation of two different dental implants considering isotropic and anisotropic human jaw

    Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, September 2023, SAGE Publications

    Professor Alessandro Ruggiero

  34. A novel ultrashort dental implant design for the reduction of the bone stress/strain: A comparative numerical investigation

    Article • Biomedical Engineering Advances, June 2023, Elsevier

    Professor Alessandro Ruggiero

  35. Mandibular Reconstruction after Resection of Ameloblastoma by Custom-Made CAD/CAM Mandibular Titanium Prosthesis: Two Case Reports, Finite Element Analysis and Discussion of the Technique

    Article • Dentistry Journal, April 2023, MDPI AG

    Professor Alessandro Ruggiero

  36. Analysis of Modified Finite Length Journal Bearing under Position Perturbation

    Article • Lubricants, April 2023, MDPI AG

    Professor Alessandro Ruggiero

  37. Effect of Chamfer Form and Parameters on the Characteristics of Finite Length Journal Bearing under Impact Load

    Article • Lubricants, February 2023, MDPI AG

    Professor Alessandro Ruggiero

  38. Analysis of the Performance of Chamfered Finite-Length Journal Bearings under Dynamic Loads

    Article • Mathematics, January 2023, MDPI AG

    Professor Alessandro Ruggiero

  39. Geometric Features of a Multilayer Surface After Water Jet Cutting in Variable Cutting Conditions

    Article • MANUFACTURING TECHNOLOGY, January 2023, Jan Evangelista Purkyne University in Usti nad Labem

    Professor Alessandro Ruggiero

  40. Microscopic Analysis of the Surface Morphology of Multilayer Structures of the AluminumAlloy - Silicon Type after Water Jet Cutting

    Article • MANUFACTURING TECHNOLOGY, January 2023, Jan Evangelista Purkyne University in Usti nad Labem

    Professor Alessandro Ruggiero

  41. Investigation of the performance of integrated intelligent models to predict the roughness of Ti6Al4V end-milled surface with uncoated cutting tool

    Article • Journal of the Mechanical Behavior of Materials, January 2023, De Gruyter

    Professor Alessandro Ruggiero

  42. Tribo-corrosive behavior of additive manufactured parts for orthopaedic applications

    Article • Journal of Orthopaedics, November 2022, Elsevier

    Professor Alessandro Ruggiero

  43. Industrial Tribology

    Article • September 2022, Taylor & Francis

    Professor Alessandro Ruggiero

  44. Real Contact Area and Friction

    Article • September 2022, Taylor & Francis

    Professor Alessandro Ruggiero

  45. Squeaking in Total Hip Arthroplasty

    Article • September 2022, Taylor & Francis

    Professor Alessandro Ruggiero

  46. Synovial Lubrication Modeling of Total Hip Replacements Using Musculoskeletal Multibody Dynamics

    Article • September 2022, Taylor & Francis

    Professor Alessandro Ruggiero

  47. Roadmap for 2D materials in biotribological/biomedical applications – A review

    Article • Advances in Colloid and Interface Science, September 2022, Elsevier

    Professor Alessandro Ruggiero

  48. (Bio)Tribocorrosion in Dental Implants: Principles and Techniques of Investigation

    Article • Applied Sciences, July 2022, MDPI AG

    Professor Alessandro Ruggiero

  49. Acoustic Monitoring of Environmental Noise Based on Sampling Approach

    Article • July 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  50. Effect of Fiber Orientation on the Tribological Performance of Abaca-Reinforced Epoxy Composite under Dry Contact Conditions

    Article • Journal of Composites Science, July 2022, MDPI AG

    Professor Alessandro Ruggiero

  51. Implementation of a Finite Element Deformation Model Within an Elasto-Hydrodynamic Lubrication Numerical Solver for a Ball in Socket Tribopair

    Article • Frontiers in Mechanical Engineering, June 2022, Frontiers

    Professor Alessandro Ruggiero

  52. Adaptive Rejection of a Sinusoidal Disturbance with Unknown Frequency in a Flexible Rotor with Lubricated Journal Bearings

    Article • Mathematics, May 2022, MDPI AG

    Professor Alessandro Ruggiero

  53. A Novel Tracking Control Strategy With Adaptive Noise Cancellation for Flexible Rotor Trajectories in Lubricated Bearings

    Article • IEEE/ASME Transactions on Mechatronics, April 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  54. A Musculoskeletal Multibody Algorithm Based on a Novel Rheonomic Constraints Definition Applied to the Lower Limb

    Article • Journal of Biomechanical Engineering, March 2022, ASME International

    Professor Alessandro Ruggiero

  55. Gender and AB0 Blood Type Differences in a Unicentric Group of University Professors in Southern Italy Who Received the Vaxzevria COVID-19 Vaccine: A Cross-Sectional Survey of Vaccine Side Effects, Attitudes, and Hesitation

    Article • Vaccines, February 2022, MDPI AG

    Dr Silvana Mirella Aliberti , Professor Alessandro Ruggiero

  56. Technological Adoption and Trends in Health Sciences Teaching, Learning, and Practice

    Article • January 2022, IGI Global

    Professor Alessandro Ruggiero

  57. Skin Tribology

    Article • January 2022, IGI Global

    Professor Alessandro Ruggiero

  58. Roughness Digital Characterization and Influence on Wear of Retrieved Knee Components

    Article • Applied Sciences, November 2021, MDPI AG

    Professor Alessandro Ruggiero

  59. Biotribology

    Article • August 2021, Taylor & Francis

    Professor Alessandro Ruggiero

  60. Influence of Alkali Treatment on the Microstructure and Mechanical Properties of Coir and Abaca Fibers

    Article • Materials, May 2021, MDPI AG

    Professor Alessandro Ruggiero

  61. Mathematical Development of a Novel Discrete Hip Deformation Algorithm for the In Silico Elasto-Hydrodynamic Lubrication Modelling of Total Hip Replacements

    Article • Lubricants, April 2021, MDPI AG

    Professor Alessandro Ruggiero

  62. Metal transfer evaluation on ceramic biocomponents: A protocol based on 3D scanners

    Article • Measurement, March 2021, Elsevier

    Professor Alessandro Ruggiero

  63. Proposal for the automatic evaluation of workers' exposure to acoustic noise following task-based approach

    Article • Measurement, March 2021, Elsevier

    Professor Alessandro Ruggiero

  64. A Commentary on the Role of Noise Measurement Uncertainty in the Industrial Context

    Article • January 2021, Springer Science + Business Media

    Professor Alessandro Ruggiero

  65. Design and Verification of an Acoustic Mitigation Intervention for an Air-Cooled Inverter Heat Pump: A Case Study

    Article • January 2021, Springer Science + Business Media

    Professor Alessandro Ruggiero

  66. Friction Comparison on Tribological Pairs HXLPE/Ti6Al4V Alloy and VE-HXLPE/Ti6Al4V Alloy Under Dry and Physiological Lubricated Conditions

    Article • January 2021, Springer Science + Business Media

    Professor Alessandro Ruggiero

  67. Nano Particles as Lubricant Additive: A Concise Review

    Article • January 2021, Springer Science + Business Media

    Professor Alessandro Ruggiero

  68. Sustainability of the Production Process by Applying Lean Manufacturing Through the PDCA Cycle – A Case Study in the Machinery Industry

    Article • January 2021, Springer Science + Business Media

    Professor Alessandro Ruggiero

  69. Biotribology in Arthroplasty: Worn Surfaces Investigation on Ceramic Hip Femoral Heads Considering Wettability

    Article • Applied Sciences, December 2020, MDPI AG

    Professor Alessandro Ruggiero

  70. A Novel Explicit Analytical Multibody Approach for the Analysis of Upper Limb Dynamics and Joint Reactions Calculation Considering Muscle Wrapping

    Article • Applied Sciences, November 2020, MDPI AG

    Professor Alessandro Ruggiero

  71. In silico total hip replacement wear testing in the framework of ISO 14242-3 accounting for mixed elasto-hydrodynamic lubrication effects

    Article • Wear, November 2020, Elsevier

    Professor Alessandro Ruggiero

  72. Ergonomics in surgical environments

    Article • October 2020, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero, Fernando Blaya

  73. Wear characterization and contact surfaces analysis of menisci and femoral retrieved components in bi-condylar knee prostheses

    Article • Journal of the Mechanical Behavior of Biomedical Materials, October 2020, Elsevier

    Professor Alessandro Ruggiero

  74. A Perspective on Biotribology in Arthroplasty: From In Vitro toward the Accurate In Silico Wear Prediction

    Article • Applied Sciences, September 2020, MDPI AG

    Professor Alessandro Ruggiero

  75. A Comparative Investigation on the Tribological Performance and Physicochemical Properties of Biolubricants of Various Sources, a Petroleum-Based Lubricant, and Blends of the Petroleum-Based Lubricant and Crambe Oil

    Article • Tribology Transactions, August 2020, Taylor & Francis

    Professor Alessandro Ruggiero

  76. Evaluation of the Real Contact Area of Rough Surfaces by Using a Finite Element Model

    Article • August 2020, Springer Science + Business Media

    Professor Alessandro Ruggiero

  77. Milestones in Natural Lubrication of Synovial Joints

    Article • Frontiers in Mechanical Engineering, July 2020, Frontiers

    Professor Alessandro Ruggiero

  78. A Mixed Elasto-Hydrodynamic Lubrication Model for Wear Calculation in Artificial Hip Joints

    Article • Lubricants, July 2020, MDPI AG

    Professor Alessandro Ruggiero

  79. Accurate Measurement of Reciprocating Kinetic Friction Coefficient Through Automatic Detection of the Running-In

    Article • IEEE Transactions on Instrumentation and Measurement, May 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  80. Editorial: Biotribology and Biotribocorrosion Properties of Implantable Biomaterials

    Article • Frontiers in Mechanical Engineering, April 2020, Frontiers

    Professor Alessandro Ruggiero

  81. Tribology of Natural Fibers Composite Materials: An Overview

    Article • Lubricants, April 2020, MDPI AG

    Professor Alessandro Ruggiero

  82. Lubrication modeling and wear calculation in artificial hip joint during the gait

    Article • Tribology International, February 2020, Elsevier

    Professor Alessandro Ruggiero

  83. Musculoskeletal multibody simulations for the optimal tribological design of human prostheses: the case of the ankle joint

    Article • IOP Conference Series Materials Science and Engineering, January 2020, Institute of Physics Publishing

    Professor Alessandro Ruggiero

  84. A Finite Element Model for the Analysis of Squeaking Hips

    Article • October 2019, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero, Fernando Blaya

  85. Design and prototype of a control for virtual environment in CHD examination

    Article • October 2019, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero, Fernando Blaya

  86. Preliminary Investigating on the Influence of Whitening on Natural Tooth Wear Resistance

    Article • October 2019, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero, Fernando Blaya

  87. Investigation on Polymer Composite Materials Wear Reinforced by Microparticles of Jatropha Curcas L. Waste

    Article • IOP Conference Series Materials Science and Engineering, October 2019, Institute of Physics Publishing

    Professor Alessandro Ruggiero

  88. Surface analysis on revised hip implants with stem taper for wear and failure incidence evaluation: A first investigation

    Article • Measurement, October 2019, Elsevier

    Professor Alessandro Ruggiero

  89. Comparison of Meshing Strategies in THR Finite Element Modelling

    Article • Materials, July 2019, MDPI AG

    Professor Alessandro Ruggiero

  90. Tribology and Dentistry: A Commentary

    Article • Lubricants, June 2019, MDPI AG

    Professor Alessandro Ruggiero

  91. Tribological investigation of epoxy/seed particle composite obtained from residues of processing Jatropha Curcas L. fruits

    Article • Composites Part B Engineering, June 2019, Elsevier

    Professor Alessandro Ruggiero

  92. A Critical Analysis of TKR In Vitro Wear Tests Considering Predicted Knee Joint Loads

    Article • Materials, May 2019, MDPI AG

    Professor Alessandro Ruggiero

  93. A Statistical Approach for Improving the Accuracy of Dry Friction Coefficient Measurement

    Article • IEEE Transactions on Instrumentation and Measurement, May 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  94. Accurate measurement of Kinetic Friction Coefficient by using two types of tribometer

    Article • May 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  95. Evaluation of the Applicability of 3d Models as Perceived by the Students of Health Sciences

    Article • Journal of Medical Systems, March 2019, Springer Science + Business Media

    Professor Alessandro Ruggiero, Fernando Blaya

  96. Experimental Comparison on Dental BioTribological Pairs Zirconia/Zirconia and Zirconia/Natural Tooth by Using a Reciprocating Tribometer

    Article • Journal of Medical Systems, March 2019, Springer Science + Business Media

    Professor Alessandro Ruggiero, Fernando Blaya

  97. Choice of the optimal acoustic design of a school classroom and experimental verification

    Article • Applied Acoustics, March 2019, Elsevier

    Professor Alessandro Ruggiero

  98. Tribological performances of total knee prostheses: Roughness measurements on medial and lateral compartments of retrieved femoral components

    Article • Measurement, March 2019, Elsevier

    Professor Alessandro Ruggiero

  99. Evaluation of physical phenomena and surface integrity during hydroabrasive disintegration of the rotating workpiece with feedback loop control

    Article • Measurement, February 2019, Elsevier

    Professor Alessandro Ruggiero

  100. Composites Manufacturing: A New Approaches to Simulation

    Article • January 2019, Springer Science + Business Media

    Professor Alessandro Ruggiero

  101. Characterization of vegetable oil as cutting fluid

    Article • Procedia Manufacturing, January 2019, Elsevier

    Professor Alessandro Ruggiero

  102. Experimental analysis of the surface roughness in the coefficient of friction test

    Article • Procedia Manufacturing, January 2019, Elsevier

    Professor Alessandro Ruggiero

  103. Experimental Description of the Aging of the Coconut Shell Powder/Epoxy Composite

    Article • September 2018, Springer Science + Business Media

    Professor Alessandro Ruggiero

  104. Fluid Film Pressure Description in Finite Turbulent Lubricated Journal Bearings by Using the Warner’s Theory

    Article • September 2018, Springer Science + Business Media

    Professor Alessandro Ruggiero

  105. Measurements of the Friction Coefficient: Discussion on the Results in the Framework of the Time Series Analysis

    Article • September 2018, Springer Science + Business Media

    Professor Alessandro Ruggiero

  106. Research on Water Jet Cutting of Polymer Composites Based on Epoxy/Waste Fibres from Coconut Processing

    Article • September 2018, Springer Science + Business Media

    Professor Alessandro Ruggiero

  107. Development of a Novel in Silico Model to Investigate the Influence of Radial Clearance on the Acetabular Cup Contact Pressure in Hip Implants

    Article • Materials, July 2018, MDPI AG

    Professor Alessandro Ruggiero

  108. Accurate Estimation of the Environmental Noise Through Sampling Approach: Selection of the Measurement Time

    Article • IEEE Transactions on Instrumentation and Measurement, May 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  109. Dynamical Simulations of a Flexible Rotor in Cylindrical Uncavitated and Cavitated Lubricated Journal Bearings

    Article • Lubricants, April 2018, MDPI AG

    Professor Alessandro Ruggiero

  110. Finite Element Simulations of Hard-On-Soft Hip Joint Prosthesis Accounting for Dynamic Loads Calculated from a Musculoskeletal Model during Walking

    Article • Materials, April 2018, MDPI AG

    Professor Alessandro Ruggiero

  111. Mechanical properties and abrasive wear of white/brown coir epoxy composites

    Article • Composites Part B Engineering, April 2018, Elsevier

    Professor Alessandro Ruggiero

  112. Wear Behaviours and Oxidation Effects on Different UHMWPE Acetabular Cups Using a Hip Joint Simulator

    Article • Materials, March 2018, MDPI AG

    Professor Alessandro Ruggiero

  113. Musa textilis Cellulose Fibres in Biocomposites – An Investigation of Mechanical Properties and Microstructure

    Article • BioResources, March 2018, BioResources

    Professor Alessandro Ruggiero

  114. Different Digitalization Techniques for 3D Printing of Anatomical Pieces

    Article • Journal of Medical Systems, January 2018, Springer Science + Business Media

    Professor Alessandro Ruggiero, Silvia Nuere, Fernando Blaya

  115. A study evaluating the level of satisfaction of the students of health sciences about the use of 3D printed bone models

    Article • January 2018, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero, Fernando Blaya

  116. On the Dental BioTribology

    Article • January 2018, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero, Fernando Blaya

  117. Estimation of the minimum measurement time interval in acoustic noise

    Article • Applied Acoustics, December 2017, Elsevier

    Professor Alessandro Ruggiero

  118. On the biotribology of total knee replacement: a new roughness measurements protocol on in vivo condyles considering the dynamic loading from musculoskeletal multibody model

    Article • Measurement, December 2017, Elsevier

    Professor Alessandro Ruggiero

  119. Mechanical Characterisation of Metal/Polymeric Composite Waste/Metal Sandwich Panel

    Article • MANUFACTURING TECHNOLOGY, September 2017, Jan Evangelista Purkyne University in Usti nad Labem

    Professor Alessandro Ruggiero

  120. Tribological characterization of vegetal lubricants: Comparative experimental investigation on Jatropha curcas L. oil, Rapeseed Methyl Ester oil, Hydrotreated Rapeseed oil

    Article • Tribology International, May 2017, Elsevier

    Professor Alessandro Ruggiero

  121. Choosing Bootstrap Method for the Estimation of the Uncertainty of Traffic Noise Measurements

    Article • IEEE Transactions on Instrumentation and Measurement, May 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  122. Influence of measurement time on acoustic noise uncertainty

    Article • May 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  123. Experimental description of strength and tribological characteristic of EFB oil palm fibres/epoxy composites with technologically undemanding preparation

    Article • Composites Part B Engineering, April 2017, Elsevier

    Professor Alessandro Ruggiero

  124. Innovative bootstrap approach for the estimation of minimum measurement time interval in road traffic noise evaluation

    Article • Measurement, February 2017, Elsevier

    Professor Alessandro Ruggiero

  125. Does metal transfer differ on retrieved Biolox® Delta composites femoral heads? Surface investigation on three Biolox® generations from a biotribological point of view

    Article • Composites Part B Engineering, January 2017, Elsevier

    Professor Alessandro Ruggiero

  126. Measurement capabilities for ball bearing wear assessment

    Article • Procedia Manufacturing, January 2017, Elsevier

    Professor Alessandro Ruggiero

  127. Noise Pollution: What the Scientific Community Can Do?

    Article • Environment Pollution and Climate Change, January 2017, OMICS Publishing Group

    Professor Alessandro Ruggiero

  128. The Importance of Uncertainty in the Noise Pollution Measurements

    Article • Environment Pollution and Climate Change, January 2017, OMICS Publishing Group

    Professor Alessandro Ruggiero

  129. Using simulation software in composites industry

    Article • January 2017, Institute for Computer Sciences, Social Informatics and Telecommunications Engineering (ICST)

    Professor Alessandro Ruggiero

  130. Systems of digitalization and processing of anatomical pieces for their three-dimensional reconstruction

    Article • January 2017, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero, Fernando Blaya

  131. Strength Characteristics of Untreated Short-fibre Composites from the Plant Ensete ventricosum

    Article • BioResources, November 2016, BioResources

    Professor Alessandro Ruggiero

  132. Determining environmental noise measurement uncertainty in the context of the Italian legislative framework

    Article • Measurement, November 2016, Elsevier

    Professor Alessandro Ruggiero

  133. Exploitation of waste date seeds of Phoenix dactylifera in form of polymeric particle biocomposite: Investigation on adhesion, cohesion and wear

    Article • Composites Part B Engineering, November 2016, Elsevier

    Professor Alessandro Ruggiero

  134. Material utilization of waste originating during processing of plant Jatropha curcas L. In biocomposites – adhesive-cohesive characteristics and wear

    Article • Tehnicki vjesnik - Technical Gazette, October 2016, Mechanical Engineering Faculty in Slavonski Brod

    Professor Alessandro Ruggiero

  135. Tribodiagnostic investigation on oil filtration: results from a novel apparatus

    Article • Industrial Lubrication and Tribology, September 2016, Emerald

    Professor Alessandro Ruggiero

  136. On the Improvement of AA2024 Wear Properties through the Deposition of a Cold-Sprayed Titanium Coating

    Article • Metals, August 2016, MDPI AG

    Professor Alessandro Ruggiero

  137. Transfer of metallic debris after in vitro ceramic-on-metal simulation: Wear and degradation in Biolox® Delta composite femoral heads

    Article • Composites Part B Engineering, July 2016, Elsevier

    Professor Alessandro Ruggiero

  138. Acoustical design and experimental verification of school music rooms: A case study

    Article • Applied Acoustics, June 2016, Elsevier

    Professor Alessandro Ruggiero

  139. On the tribological behavior of retrieved hip femoral heads affected by metallic debris. A comparative investigation by stylus and optical profilometer for a new roughness measurement protocol

    Article • Measurement, May 2016, Elsevier

    Professor Alessandro Ruggiero

  140. Does metal transfer affect the tribological behaviour of femoral heads? Roughness and phase transformation analyses on retrieved zirconia and Biolox® Delta composites

    Article • Composites Part B Engineering, May 2016, Elsevier

    Professor Alessandro Ruggiero

  141. A preliminary study on the estimation of the uncertainty of traffic noise measurements

    Article • May 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  142. Experimental comparison on tribological pairs UHMWPE/TIAL6V4 alloy, UHMWPE/AISI316L austenitic stainless and UHMWPE/AL2O3 ceramic, under dry and lubricated conditions

    Article • Tribology International, April 2016, Elsevier

    Professor Alessandro Ruggiero

  143. Environmental Acoustic Noise Measurement Uncertainty

    Article • IEEE Transactions on Instrumentation and Measurement, February 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  144. On the Tribological Performance of Vegetal Lubricants: Experimental Investigation on Jatropha Curcas L. oil

    Article • Procedia Engineering, January 2016, Elsevier

    Professor Alessandro Ruggiero

  145. Research on Influence of Loading Speed of Structural Two-component Epoxy Adhesives on Adhesive Bond Strength

    Article • Procedia Engineering, January 2016, Elsevier

    Professor Alessandro Ruggiero

  146. Measurement of thermal emission during cutting of materials using abrasive water jet

    Article • Thermal Science, January 2016, National Library of Serbia

    Professor Alessandro Ruggiero

  147. Experimental analysis of tribological behavior of UHMWPE against AISI420C and against TiAl6V4 alloy under dry and lubricated conditions

    Article • Tribology International, December 2015, Elsevier

    Professor Alessandro Ruggiero

  148. Advanced biomaterials in hip joint arthroplasty. A review on polymer and ceramics composites as alternative bearings

    Article • Composites Part B Engineering, December 2015, Elsevier

    Professor Alessandro Ruggiero

  149. Tribo-mechanical characterization of reinforced epoxy resin under dry and lubricated contact conditions

    Article • Composites Part B Engineering, September 2015, Elsevier

    Professor Alessandro Ruggiero

  150. Friction and Wear Behaviors of Al/Epoxy Composites during Reciprocating Sliding Tests

    Article • MANUFACTURING TECHNOLOGY, September 2015, Jan Evangelista Purkyne University in Usti nad Labem

    Professor Alessandro Ruggiero

  151. Analytical fluid film force calculation in the case of short bearing with a fully developed turbulent flow

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, August 2015, SAGE Publications

    Professor Alessandro Ruggiero

  152. Mechanical and Tribological Characterization of Composite Laminates Manufactured by Liquid Composite Molding Processes

    Article • Key Engineering Materials, July 2015, Trans Tech Publications

    Professor Alessandro Ruggiero, Pierpaolo Carlone

  153. Towards the evaluation of the measurement uncertainty of environmental acoustic noise

    Article • May 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  154. knee prostheses

    Article • The International Journal of Artificial Organs, December 2014, Wichtig

    Professor Alessandro Ruggiero

  155. Online Monitoring and Analysis of Hydroabrasive Cutting by Vibration

    Article • Advances in Mechanical Engineering, January 2013, SAGE Publications

    Professor Alessandro Ruggiero

  156. Approximate closed-form solution of the synovial fluid film force in the human ankle joint with non-Newtonian lubricant

    Article • Tribology International, January 2013, Elsevier

    Professor Alessandro Ruggiero

  157. 10th International Conference “BIOMDLORE 2013”

    Article • January 2013, Vilnius Gediminas Technical University

    Professor Alessandro Ruggiero

  158. Approximate Analytical Model for the Squeeze-Film Lubrication of the Human Ankle Joint with Synovial Fluid Filtrated by Articular Cartilage

    Article • Tribology Letters, October 2010, Springer Science + Business Media

    Professor Alessandro Ruggiero

  159. Unsteady oil film forces in porous bearings: analysis of  permeability effect on the rotor linear stability

    Article • Meccanica, November 2008, Springer Science + Business Media

    Professor Alessandro Ruggiero

  160. Approximate closed-form solution for the dynamical analysis of short bearings with couple stress fluid

    Article • Lubrication Science, January 2007, Wiley

    Professor Alessandro Ruggiero

  161. Approximate model for unsteady finite porous journal bearings fluid film force calculation

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, March 2006, SAGE Publications

    Professor Alessandro Ruggiero

  162. On the effective length of the top piston ring involved in hydrodynamic lubrication

    Article • Lubrication Science, May 2005, Wiley

    Professor Alessandro Ruggiero