All Stories

  1. A metallurgical failure analysis of mTBM disc cutters under hard rock excavation

    Article • Engineering Failure Analysis, October 2025, Elsevier

    Professor Giuseppe Pintaude

  2. Revisiting an Indentation Method for Measuring Low Wear Rates Using 3D Interferometry

    Article • Metrology, June 2025, MDPI AG

    Professor Giuseppe Pintaude

  3. Tribological performance of NbC-based hardmetal HVOF coatings with Fe-Cr-Mo matrix

    Article • Wear, March 2025, Elsevier

    Professor Giuseppe Pintaude

  4. Advanced tribological solutions for sustainable future

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, February 2025, SAGE Publications

    Professor Giuseppe Pintaude, Dr. Jitendra Kumar Katiyar

  5. Tribological Behavior of Anodized Aluminum Oxide (AAO) Under the Addition of PAO6 Lubrication with Nano-Alumina

    Article • Lubricants, February 2025, MDPI AG

    Professor Giuseppe Pintaude

  6. Effects of isothermal heat treatment on tribological and electrochemical performances of alumina-based coatings with monoclinic zirconia

    Article • Industrial Lubrication and Tribology, January 2025, Emerald

    Professor Giuseppe Pintaude

  7. Sliding Wear Behavior of WP7V Tool Steel with Different Hardnesses Under Reciprocating Test Rig

    Article • Lubricants, December 2024, MDPI AG

    Professor Giuseppe Pintaude

  8. Sliding Wear Behavior of WP7V Tool Steel with Different Hardness Under Reciprocating Test Rig

    Article • November 2024, MDPI AG

    Professor Giuseppe Pintaude

  9. MODOS DE FALHA DOS DISCOS DE CORTE DE MICROTUNELADORA NA ESCAVAÇÃO DE UM TRECHO DE ROCHA EM OBRA DE SANEAMENTO - RJ

    Article • September 2024, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  10. SELEÇÃO DE VARIÁVEIS DE ENSAIO DE DESGASTE PARA AÇO FERRAMENTA EM ESTAMPAGEM A QUENTE

    Article • September 2024, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  11. Evaluation of the anticorrosive painting procedure with reused abrasive for surface preparation – a case study

    Article • Engineering Research Express, August 2024, Institute of Physics Publishing

    Professor Giuseppe Pintaude

  12. A comprehensive review of machinability of difficult-to-machine alloys with advanced lubricating and cooling techniques

    Article • Tribology International, August 2024, Elsevier

    Professor Giuseppe Pintaude

  13. Mechanical, Tribological, and Electrochemical Evaluation of NiCrAlMoFe Thermally Sprayed Coatings Subject to Post-treatments

    Article • Journal of Materials Engineering and Performance, March 2024, Springer Science + Business Media

    Professor Giuseppe Pintaude

  14. Development and thermo-mechanical characterization of cyanoacrylate-based tissue adhesives

    Article • Journal of Adhesion Science and Technology, February 2024, Taylor & Francis

    Professor Giuseppe Pintaude

  15. Effect of Silica Size on the Relative Wear of Microstructures Containing Solidification Carbides and Tempered Martensite Using a Dry Sand Rubber Wheel Test

    Article • Tribology Transactions, January 2024, Taylor & Francis

    Professor Giuseppe Pintaude

  16. COMPORTAMENTO TRIBOLÓGICO DO AÇO CA-6NM CEMENTADO POR PLASMA A ELEVADA TEMPERATURA

    Article • January 2024, Associacao Brasileira de Engenharia e Ciencias Mecanicas - ABCM

    Professor Giuseppe Pintaude

  17. Editorial—Special Issue on Functional Surfaces: Manufacturing, Measuring, and Performance

    Article • Materials Performance and Characterization, December 2023, ASTM International

    Professor Giuseppe Pintaude

  18. Tribological and electrochemical performances of HVOF sprayed NbC-NiCr coatings

    Article • Surface and Coatings Technology, December 2023, Elsevier

    Professor Giuseppe Pintaude

  19. Review of improvement of machinability and surface integrity in machining on aluminum alloys

    Article • The International Journal of Advanced Manufacturing Technology, November 2023, Springer Science + Business Media

    Professor Giuseppe Pintaude

  20. The Effect of Counterbody Material on Tribological Behavior of Active Screen Plasma-Nitrided Inconel 718 Under Saline Solution

    Article • Tribology Letters, September 2023, Springer Science + Business Media

    Professor Giuseppe Pintaude

  21. Wear Resistance of Fe–Cr–C Hardfacing Deposited by Flux-Core-Double-Wire GTAW in Rubber Wheel Abrasion Test

    Article • Materials Performance and Characterization, September 2023, ASTM International

    Professor Giuseppe Pintaude

  22. ANÁLISE E CARACTERIZAÇÃO DE MODOS DE FALHA EM MATRIZES DE FORJAMENTO DE ALUMÍNIO

    Article • August 2023, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  23. COMPORTAMENTO EM MICROABRASÃO DO AÇO PARA TRABALHO A FRIO 0,70%C, 7,5% CR, 1,0% V, 2,0% MO, 1,5% NI PRODUZIDO POR METALURGIA DO PÓ *

    Article • August 2023, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  24. Influence of selective laser melting process parameters on the surface integrity of difficult-to-cut alloys: comprehensive review and future prospects

    Article • The International Journal of Advanced Manufacturing Technology, June 2023, Springer Science + Business Media

    Professor Giuseppe Pintaude

  25. Correlation of Tensile Properties of Arc-Sprayed Coatings and Easy Testing Methods

    Article • Coatings, May 2023, MDPI AG

    Professor Giuseppe Pintaude

  26. Mechanical and Tribological Behavior of LM26/SiC/Ni-Gr Hybrid Composites

    Article • Journal of Composites Science, April 2023, MDPI AG

    Professor Giuseppe Pintaude

  27. Tribo-Mechanical Behavior of Films and Modified Layers Produced by Cathodic Cage and Glow Discharge Plasma Nitriding Techniques

    Article • Metals, February 2023, MDPI AG

    Professor Giuseppe Pintaude

  28. Detailed tribological analysis of compressor lubricants used in electrical technology

    Article • Lubrication Science, February 2023, Wiley

    Professor Giuseppe Pintaude

  29. Dry Sliding Wear Resistance of Fe-Cr-C hardfacing Deposited by Flux-Core-Double-Wire GTAW

    Article • Materials Research, January 2023, FapUNIFESP (SciELO)

    Professor Giuseppe Pintaude

  30. Application of plastometry technique for hot stamping tool steels

    Article • Tecnologia em Metalurgia Materiais e Mineração, January 2023, Editora Cubo Multimidia

    Professor Giuseppe Pintaude

  31. Influence of the screw raw material and surface topography on mechanical behavior of Morse Taper Dental implant systems

    Article • January 2023, Associacao Brasileira de Engenharia e Ciencias Mecanicas - ABCM

    Professor Giuseppe Pintaude

  32. RESISTÊNCIA AO IMPACTO DE AÇOS FERRAMENTA PARA ESTAMPAGEM A QUENTE

    Article • January 2023, Associacao Brasileira de Engenharia e Ciencias Mecanicas - ABCM

    Professor Giuseppe Pintaude

  33. Tribological analysis of the contact between WC/Co drill bits and concretes samples of varying uniaxial compressive strengths.

    Article • January 2023, Associacao Brasileira de Engenharia e Ciencias Mecanicas - ABCM

    Professor Giuseppe Pintaude

  34. The Effect of the Dilution Level on Microstructure and Wear Resistance of Fe-Cr-CV Hardfacing Coatings Deposited by PTA-P

    Article • Coatings, November 2022, MDPI AG

    Professor Giuseppe Pintaude

  35. Abrasive Wear Resistance of High-Strength Compacted Graphite Iron

    Article • Lubricants, November 2022, MDPI AG

    Professor Giuseppe Pintaude

  36. Resource saving by optimization and machining environments for sustainable manufacturing: A review and future prospects

    Article • Renewable and Sustainable Energy Reviews, September 2022, Elsevier

    Professor Giuseppe Pintaude

  37. Remarks on Wear Transitions Related to Hardness and Size of Abrasive Particles

    Article • June 2022, IntechOpen

    Professor Giuseppe Pintaude

  38. Tribology of Machine Elements - Fundamentals and Applications

    Article • June 2022, IntechOpen

    Professor Giuseppe Pintaude

  39. Hardness as an indicator of material strength: a critical review

    Article • Critical Reviews in Solid State and Material Sciences, June 2022, Taylor & Francis

    Professor Giuseppe Pintaude

  40. ZDDP Tribofilm Formation from a Formulated Oil on Textured Cylinder Liners

    Article • Lubricants, June 2022, MDPI AG

    Professor Giuseppe Pintaude

  41. Transitional behavior in sliding wear of martensitic layer obtained with SHPTN process on AISI 409 steel

    Article • Surface Topography Metrology and Properties, June 2022, Institute of Physics Publishing

    Professor Giuseppe Pintaude

  42. Wear Regimes of Fe–Cr–C Hardfacing Alloys in Microscale Abrasion Tests

    Article • Tribology Letters, April 2022, Springer Science + Business Media

    Professor Giuseppe Pintaude

  43. Editorial: Wilson Luiz Guesser (1952-2020)

    Article • Tecnologia em Metalurgia Materiais e Mineração, January 2022, Editora Cubo Multimidia

    Professor Giuseppe Pintaude

  44. The effect of graphite number per area on tribological behavior of high-strength compacted cast irons in lubricated tests

    Article • Tecnologia em Metalurgia Materiais e Mineração, January 2022, Editora Cubo Multimidia

    Professor Giuseppe Pintaude

  45. Tribological performance of high-strength cast iron in lubricated contact containing carbon black

    Article • Wear, July 2021, Elsevier

    Professor Giuseppe Pintaude

  46. Investigations on quality characteristics in gas tungsten arc welding process using artificial neural network integrated with genetic algorithm

    Article • The International Journal of Advanced Manufacturing Technology, March 2021, Springer Science + Business Media

    Professor Giuseppe Pintaude

  47. Cilindros e anéis de um motor diesel pesado expostos ao biodiesel B15.

    Article • March 2021, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  48. Surface characterization of the seating platform of titanium implant processed with different textures

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, February 2021, Springer Science + Business Media

    Professor Giuseppe Pintaude

  49. Combined effects on Fe-Cr-C hardfacing deposited by new technique FCDW-GTAW

    Article • Matéria (Rio de Janeiro), January 2021, FapUNIFESP (SciELO)

    Professor Giuseppe Pintaude

  50. Estratégias para o Desenvolvimento de Revestimentos Resistentes ao Desgaste: Uma Revisão

    Article • Soldagem & Inspeção, January 2021, FapUNIFESP (SciELO)

    Professor Giuseppe Pintaude

  51. FALSE FAILURE INDEX REDUCTION IN COLD-START DYNAMOMETER USING STATISTICAL PROCESS CONTROL

    Article • Revista SODEBRAS, December 2020, Revista SODEBRAS

    Professor Giuseppe Pintaude

  52. Effect of austempering treatment on lubricated sliding contact of compacted graphite iron

    Article • SN Applied Sciences, November 2020, Springer Science + Business Media

    Professor Giuseppe Pintaude

  53. Guest editorial

    Article • Industrial Lubrication and Tribology, November 2020, Emerald

    Professor Giuseppe Pintaude

  54. Effect of Aged Oils on Ring-Liner Wear

    Article • SAE International Journal of Fuels and Lubricants, July 2020, SAE International

    Professor Giuseppe Pintaude

  55. Scratch resistances of compacted graphite iron with plasma nitriding, laser hardening, and duplex surface treatments

    Article • Tribology International, March 2020, Elsevier

    Professor Giuseppe Pintaude, Dr Milton SF LIMA

  56. The effect of plasma nitriding on the synergism between wear and corrosion of SAF 2205 duplex stainless steel

    Article • Industrial Lubrication and Tribology, February 2020, Emerald

    Professor Giuseppe Pintaude

  57. Energetic coefficient of friction applied to cylinder liners lab tests

    Article • Industrial Lubrication and Tribology, December 2019, Emerald

    Professor Giuseppe Pintaude

  58. We have compared erosion models, discussing the effect of friction on the erosion rates.

    Article • Tribology - Materials Surfaces & Interfaces, November 2019, Taylor & Francis

    Professor Giuseppe Pintaude

  59. Assessing Viscosity in Hydro-Erosive Grinding Process via Refractometry

    Article • SAE International Journal of Fuels and Lubricants, August 2019, SAE International

    Professor Giuseppe Pintaude

  60. Wear and Corrosion Resistances of Active Screen Plasma-Nitrided Duplex Stainless Steels

    Article • Journal of Materials Engineering and Performance, May 2019, Springer Science + Business Media

    Professor Giuseppe Pintaude

  61. Electrolytic polishing of compacted graphite iron for revealing subsurface graphite of honed cylinders

    Article • Matéria (Rio de Janeiro), May 2019, FapUNIFESP (SciELO)

    Professor Giuseppe Pintaude

  62. On the Use of Microscale Abrasion Test for Determining the Particle Abrasivity

    Article • Journal of Testing and Evaluation, May 2019, ASTM International

    Professor Giuseppe Pintaude

  63. Tribological performance assessment of lamellar and compacted graphite irons in lubricated ring-on-cylinder test

    Article • Wear, April 2019, Elsevier

    Professor Giuseppe Pintaude

  64. Maintenance of hydroerosive grinding efficiency based on particle size distribution of abrasive fluid

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, January 2019, Springer Science + Business Media

    Professor Giuseppe Pintaude

  65. ANÁLISE DE RESISTÊNCIA AO DESGASTE EM AÇO 15-5PH NITRETADO A PLASMA

    Article • January 2019, Associacao Brasileira de Engenharia e Ciencias Mecanicas - ABCM

    Professor Giuseppe Pintaude

  66. Wear analysis of PVD-coated twist drills under MQL

    Article • Industrial Lubrication and Tribology, November 2018, Emerald

    Professor Giuseppe Pintaude

  67. USO DO ENSAIO DE RISCAMENTO LINEAR PARA CARACTERIZAÇÃO DE SUPERFÍCIES TRATADAS TERMOQUIMICAMENTE: UMA ABORDAGEM MULTIESCALA

    Article • November 2018, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  68. Evaluation of friction coefficient of lamellar and compacted graphite irons in lubricated ring-on-cylinder system

    Article • September 2018, SAE International

    Professor Giuseppe Pintaude

  69. Mechanisms of wear in the Cherchar test

    Article • Wear, September 2018, Elsevier

    Professor Giuseppe Pintaude

  70. Deformation Regimes for Sphere-Plane Contact: Revisiting Tabor’s Criteria for Differential Hardness

    Article • May 2018, IntechOpen

    Professor Giuseppe Pintaude

  71. Evaluation of the error of the light beam incidence on concave surfaces in 3D roughness parameters using optical interferometry

    Article • Measurement, May 2018, Elsevier

    Professor Giuseppe Pintaude

  72. Jaw crusher abrasion test

    Article • REM - International Engineering Journal, March 2018, FapUNIFESP (SciELO)

    Professor Giuseppe Pintaude

  73. Three-Layer Coating for Subsea Components

    Article • Advances in Materials Science and Engineering, January 2018, Hindawi Publishing Corporation

    Professor Giuseppe Pintaude, Carlos Henrique Silva, Ane Rovani

  74. The folded metal occurrence in honed cast irons

    Article • Surface Topography Metrology and Properties, September 2017, Institute of Physics Publishing

    Professor Giuseppe Pintaude

  75. Rolling Contact Fatigue Failure Mechanisms of Plasma-Nitrided Ductile Cast Iron

    Article • Journal of Materials Engineering and Performance, May 2017, Springer Science + Business Media

    Professor Giuseppe Pintaude

  76. Comparison between carburizing and nitriding plasma treatments for stainless steel

    Article • Wear, April 2017, Elsevier

    Professor Giuseppe Pintaude

  77. DETERMINAÇÃO DA MELHOR CONDIÇÃO DE POLIMENTO ELETROLÍTICO DE FERROS FUNDIDOS PARA A EXPOSIÇÃO DA GRAFITA SUBSUPERFICIAL EM CILINDROS BRUNIDOS

    Article • January 2017, Associacao Brasileira de Engenharia e Ciencias Mecanicas - ABCM

    Professor Giuseppe Pintaude

  78. Improvement of hydroerosive grinding efficiency based on the physical characterization of abrasive fluid

    Article • January 2017, Associacao Brasileira de Engenharia e Ciencias Mecanicas - ABCM

    Professor Giuseppe Pintaude

  79. Proposta de metodologia de tratamento de sinais para o coeficiente de atrito em ensaios reciprocating do tipo anel sobre cilindro

    Article • January 2017, Associacao Brasileira de Engenharia e Ciencias Mecanicas - ABCM

    Professor Giuseppe Pintaude

  80. UMA REVISÃO SOBRE ENSAIOS TRIBOLÓGICOS PARA MEDIR ABRASIVIDADE DE PARTÍCULAS DURAS

    Article • January 2017, Associacao Brasileira de Engenharia e Ciencias Mecanicas - ABCM

    Professor Giuseppe Pintaude

  81. Scratch resistance of cast irons

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, November 2016, Springer Science + Business Media

    Professor Giuseppe Pintaude

  82. How machining parameters affect surface roughness and residual stresses

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, October 2016, Springer Science + Business Media

    Professor Giuseppe Pintaude

  83. Remarks on the application of two-dimensional shape factors under severe wear conditions

    Article • Friction, March 2016, Tsinghua University Press

    Professor Giuseppe Pintaude, Mario Sergio Della Roverys Coseglio

  84. INFLUÊNCIA DO TEMPO DE CEMENTAÇÃO POR PLASMA A BAIXA TEMPERATURA NO COMPORTAMENTO TRIBOLÓGICO DO AÇO CA-6NM

    Article • January 2016, SWGE Sistemas

    Professor Giuseppe Pintaude

  85. INFLUÊNCIA DO TEMPO DE NITRETAÇÃO POR PLASMA A BAIXA TEMPERATURA NO COMPORTAMENTO TRIBOLÓGICO DO AÇO CA-6NM EM ENSAIO DE RISCAMENTO LINEAR

    Article • January 2016, SWGE Sistemas

    Professor Giuseppe Pintaude

  86. Efficiency of Hydroerosive Grinding Process

    Article • Journal of Manufacturing Science and Engineering, October 2015, ASME International

    Professor Giuseppe Pintaude, Mario Sergio Della Roverys Coseglio

  87. Analysis of Spherical Contact Models for Differential Hardness as a Function of Poisson's Ratio

    Article • Journal of Tribology, July 2015, ASME International

    Professor Giuseppe Pintaude

  88. Effect of Heat Treatment on Wear Resistance of Nickel Aluminide Coatings Deposited by HVOF and PTA

    Article • Journal of Thermal Spray Technology, July 2015, Springer Science + Business Media

    Professor Giuseppe Pintaude

  89. Avaliação da Influência da Espessura da Parede de Cilindros de Blocos de Motor a Combustão Interna na Microestrutura do Ferro Fundido Cinzento e Vermicular

    Article • January 2015, SWGE Sistemas

    Professor Giuseppe Pintaude

  90. Hardness and Characterization of Coatings Employed in Subsea Equipments

    Article • January 2015, Society of Petroleum Engineers (SPE)

    Professor Giuseppe Pintaude

  91. Influence of Fe on the room and high-temperature sliding wear of NiAl coatings

    Article • Surface and Coatings Technology, November 2014, Elsevier

    Professor Giuseppe Pintaude, Professor Ana Sofia C. M. D'Oliveira

  92. DRY SLIDING WEAR OF CA-6NM STAINLESS STEEL WITH RELATIVELY LOW SURFACE ROUGHNESS

    Article • November 2014, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  93. ABRASION RESISTANCE OF NICKEL ALUMINIDE COATINGS DEPOSITED BY HVOF AND PTA PROCESSES

    Article • November 2014, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  94. A DISCUSSION ON THE APPLICATION OF BI-DIMENSIONAL SHAPE FACTORS OF PARTICLES CAUSING SEVERE WEAR OF METALS

    Article • November 2014, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  95. The Influence of Fe Content on the Mechanical Properties of NiAl Coatings Processed In-Situ

    Article • Journal of Materials Engineering and Performance, August 2014, Springer Science + Business Media

    Professor Giuseppe Pintaude, Professor Ana Sofia C. M. D'Oliveira

  96. INFLUÊNCIA DO TRATAMENTO SUPERFICIAL DE SHTPN NO COMPORTAMENTO TRIBOLÓGICO DO AÇO INOXIDÁVEL FERRÍTICO AISI 409

    Article • July 2014, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  97. Maximum Entropy Approach for Modeling Hardness Uncertainties in Rabinowicz's Abrasive Wear Equation

    Article • Journal of Tribology, February 2014, ASME International

    Professor Giuseppe Pintaude

  98. Analysis of indentation morphologies

    Article • Materials Research, February 2014, FapUNIFESP (SciELO)

    Professor Giuseppe Pintaude

  99. Introduction of the H/E for Abrasion

    Article • May 2013, IntechOpen

    Professor Giuseppe Pintaude

  100. Relation between strain hardening exponent of metals and residual profiles of deep spherical indentation

    Article • Materials Science and Technology, October 2012, Taylor & Francis

    Professor Giuseppe Pintaude

  101. Characterization of NiCrAlC PTA coatings

    Article • Materials Research, October 2012, FapUNIFESP (SciELO)

    Professor Giuseppe Pintaude, Professor Ana Sofia C. M. D'Oliveira

  102. Effect of surface finishing on the elastic contact area evaluation of austempered ductile iron

    Article • Lubrication Science, March 2012, Wiley

    Professor Giuseppe Pintaude

  103. Analysis of Ni-Al Coatings In-situ Processed by Plasma Transferred Arc

    Article • September 2011, ASM International

    Professor Giuseppe Pintaude

  104. Machinability of compacted graphite iron during drilling under flood condition

    Article • Wear, July 2011, Elsevier

    Professor Giuseppe Pintaude

  105. Abrasive Particles and Wear

    Article • April 2011, IntechOpen

    Professor Giuseppe Pintaude

  106. Modification of NiAl Intermetallic Coatings Processed by PTA with Chromium Carbides

    Article • Journal of ASTM International, April 2011, ASTM International

    Professor Giuseppe Pintaude, Professor Ana Sofia C. M. D'Oliveira

  107. Modification of NiAl Intermetallic Coatings Processed by PTA with Chromium Carbides

    Article • April 2011, ASTM International

    Professor Giuseppe Pintaude

  108. Abrasion and corrosion resistance of new Ni–based coating deposited by HVOF thermal spray process

    Article • Surface Engineering, August 2010, Taylor & Francis

    Professor Giuseppe Pintaude

  109. Hardness Differential for Abrasion

    Article • Journal of Tribology, January 2010, ASME International

    Professor Giuseppe Pintaude

  110. An Application of Mean Square Calculus to Sliding Wear

    Article • Journal of Applied Mechanics, January 2010, ASME International

    Professor Giuseppe Pintaude

  111. EFEITO DA PREPARAÇÃO SUPERFICIAL NO DESEMPENHO EM FADIGA DE CONTATO DE ROLAMENTO DE FERRO FUNDIDO NODULAR AUSTEMPERADO

    Article • August 2009, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  112. Mild and severe wear of steels and cast irons in sliding abrasion

    Article • Wear, June 2009, Elsevier

    Professor Giuseppe Pintaude

  113. Plastic deformation analysis of low-carbon steel due to metal hole punching using coated and uncoated tools

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, March 2009, FapUNIFESP (SciELO)

    Professor Giuseppe Pintaude

  114. EFEITO DA RUGOSIDADE NO COEFICIENTE DE ATRITO ESTÁTICO DE PISOS CERÂMICOS

    Article • August 2008, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  115. EFEITO DA RUGOSIDADE NO COEFICIENTE DE ATRITO ESTÁTICO DE PISOS CERÂMICOS

    Article • August 2008, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  116. Uncertainty analysis on the wear coefficient of Archard model

    Article • Tribology International, June 2008, Elsevier

    Professor Giuseppe Pintaude

  117. Friction and Wear Behavior of Electroplated and Thermal Sprayed Coatings Tested in an Instrumented Rubber Wheel Abrasion Test

    Article • Journal of ASTM International, November 2007, ASTM International

    Professor Giuseppe Pintaude

  118. Effect of specimen preparation on contact fatigue wear resistance of austempered ductile cast iron

    Article • Wear, September 2007, Elsevier

    Professor Giuseppe Pintaude

  119. MECANISMOS DE DESGASTE POR FADIGA DE CONTATO NO FERRO FUNDIDO NODULAR AUSTEMPERADO EM CONDIÇÕES MODERADAS E SEVERAS DE DESGASTE

    Article • August 2006, Editora Edgard Blucher, Ltda.

    Professor Giuseppe Pintaude

  120. MODELOS PARA DETERMINAÇÃO DO MÓDULO DE ELASTICIDADE DE LIGAS METÁLICAS UTILIZANDO ENSAIOS DE PENETRAÇÃO INSTRUMENTADA

    Article • Tecnologia em Metalurgia e Materiais, January 2006, Editora Cubo Multimidia

    Professor Giuseppe Pintaude

  121. A review on the reverse analysis for the extraction of mechanical properties using instrumented Vickers indentation

    Article • Zeitschrift für Metallkunde, November 2005, Carl Hanser Verlag

    Professor Giuseppe Pintaude, Professor Claudio Geraldo Schön

  122. Influence of Temperature on the Rheological Properties of ISO Lubricants

    Article • November 2004, SAE International

    Professor Giuseppe Pintaude

  123. The use of a vickers indenter in depth sensing indentation for measuring elastic modulus and vickers hardness

    Article • Materials Research, September 2004, FapUNIFESP (SciELO)

    Professor Giuseppe Pintaude

  124. UMA CONCEPÇÃO MULTIDISCIPLINAR PARA PROJETO E SELEÇÃO DE MATRIZES PARA MOLDAGEM POR INJEÇÃO DE COMPÓSITOS DE FIBRAS NATURAIS

    Article • Tecnologia em Metalurgia e Materiais, January 2004, Editora Cubo Multimidia

    Professor Giuseppe Pintaude

  125. An approach to elucidate the different response of PVD coatings in different tribological tests

    Article • Surface and Coatings Technology, September 2003, Elsevier

    Professor Giuseppe Pintaude

  126. The effects of abrasive particle size on the sliding friction coefficient of steel using a spiral pin-on-disk apparatus

    Article • Wear, August 2003, Elsevier

    Professor Giuseppe Pintaude

  127. The particle size effect on abrasive wear of high-chromium white cast iron mill balls

    Article • Wear, October 2001, Elsevier

    Professor Giuseppe Pintaude

  128. Effect of indentation size and microhardness calculation on abrasive wear severity

    Article • Scripta Materialia, March 2001, Elsevier

    Professor Giuseppe Pintaude

  129. This thesis describes the mild and severe wear regimes of abrasive wear.

    Article • Universidade de Sao Paulo Sistema Integrado de Bibliotecas - SIBiUSP

    Professor Giuseppe Pintaude

  130. Estudo do regime transiente em desgaste abrasivo: ensaios em britador de mandíbulas.

    Article • Universidade de Sao Paulo Sistema Integrado de Bibliotecas - SIBiUSP

    Professor Giuseppe Pintaude