All Stories

  1. Characterization of the effective Poisson's ratio of auxetic structures: a novel numerical method and evaluation

    Article • Smart Materials and Structures, February 2026, Institute of Physics Publishing

    Professor Mahmood Mehrdad Shokrieh

  2. Elastic-plastic fracture analysis of notched aluminum sheets repaired with prestressed SMA-reinforced composite patches

    Article • Theoretical and Applied Fracture Mechanics, October 2025, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  3. Mechanical fatigue of flexible batteries

    Article • Applied Physics Reviews, September 2025, American Institute of Physics

    Professor Mahmood Mehrdad Shokrieh

  4. A simulated approach to detect matrix cracking in cross-ply laminated composites using Lamb wave propagation and FBG sensor

    Article • Acta Mechanica, August 2025, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  5. Effects of size distribution and surface treatments of seashell particles on flexural properties of seashell/epoxy composites

    Article • Polymer Composites, February 2025, Wiley

    Professor Mahmood Mehrdad Shokrieh

  6. Fatigue Life Simulation of Short Glass Fiber/Rubber Composites Using the Damage‐Entropy and Self‐Heating Concepts

    Article • Fatigue & Fracture of Engineering Materials & Structures, January 2025, Wiley

    Professor Mahmood Mehrdad Shokrieh

  7. On the Schapery nonlinear viscoelastic model: A review

    Article • European Journal of Mechanics - A/Solids, November 2024, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  8. Agglomeration phenomenon in graphene/polymer nanocomposites: Reasons, roles, and remedies

    Article • Applied Physics Reviews, October 2024, American Institute of Physics

    Professor Mahmood Mehrdad Shokrieh

  9. Effects of TiO2 nanoparticles and silane coupling agents on the adhesion strength and weathering properties of silicone rubber coatings

    Article • International Journal of Adhesion and Adhesives, March 2024, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  10. Progressive fatigue damage modeling of laminated composites using a novel combined fatigue life model

    Article • Journal of Composite Materials, February 2024, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  11. Progressive fatigue damage modeling of laminated composites using strain-based failure criteria

    Article • Journal of Composite Materials, January 2024, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  12. A new semi-numerical method for calculation of the critical J-integral

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, September 2023, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  13. Reinforcement of cracked aluminum plates using polymeric composite patches embedded with prestressed SMA wires

    Article • Journal of Composite Materials, June 2023, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  14. Evolution of the temperature rise and damage in laminated composites with stress concentration under fatigue loading

    Article • Composites Part B Engineering, April 2023, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  15. Discrimination between the strain and temperature effects of a cantilever beam using one uniform FBG sensor

    Article • Opto-electronics, December 2022, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  16. Interaction of crack-tip constraint and welding residual stresses on the fracture behavior of Ni-based alloy

    Article • Theoretical and Applied Fracture Mechanics, October 2022, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  17. Fatigue behavior of laminated composites with embedded SMA wires

    Article • Composite Structures, August 2022, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  18. Detection and characterization of matrix cracking in fiber‐metal laminates using Lamb wave propagation

    Article • Structural Control and Health Monitoring, July 2022, Wiley

    Professor Mahmood Mehrdad Shokrieh

  19. Экспериментальное и численное исследование отклика на низкоскоростной удар сандвичконструкций с сердцевиной из полипропилена, армированной графеном

    Article • Механика композитных материалов, May 2022, University of Latvia

    Professor Mahmood Mehrdad Shokrieh

  20. An Experimental and Numerical Investigation on the Low-Velocity Impact Response of Nanoreinforced Polypropylene Core Sandwich Structures

    Article • Mechanics of Composite Materials, May 2022, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  21. Effects of the addition of carbon nanofibers on mechanical properties of woven glass/epoxy composites with different weave patterns

    Article • Journal of Industrial Textiles, April 2022, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  22. Sensitivity of the impact performance of nano reinforced sandwich structures to the material and geometrical variations

    Article • Journal of Composite Materials, March 2022, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  23. A novel rate-dependent cohesive zone model for simulation of mode I dynamic delamination in laminated composites

    Article • Composite Structures, February 2022, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  24. Effect of glass nanofibers on mode I interlaminar fracture toughness of glass/epoxy composites

    Article • Journal of the Textile Institute, December 2021, Taylor & Francis

    Professor Mahmood Mehrdad Shokrieh

  25. Residual Stress in Engineering Materials: A Review

    Article • Advanced Engineering Materials, November 2021, Wiley

    Professor Mahmood Mehrdad Shokrieh

  26. Simulation and measurement of the self-heating phenomenon of carbon/epoxy laminated composites under fatigue loading

    Article • Composites Part B Engineering, October 2021, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  27. Damage-entropy model for fatigue life evaluation of off-axis unidirectional composites

    Article • Composite Structures, August 2021, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  28. Simulated Lamb wave propagation method for nondestructive monitoring of matrix cracking in laminated composites

    Article • Structural Health Monitoring, May 2021, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  29. Numerical and Experimental Studies of Fabrication-Induced Thermal Residual Stresses in Microelectronic Packages

    Article • IEEE Transactions on Components Packaging and Manufacturing Technology, May 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Mahmood Mehrdad Shokrieh

  30. Very high cycle and gigacycle fatigue of fiber-reinforced composites: A review on experimental approaches and fatigue damage mechanisms

    Article • Progress in Materials Science, May 2021, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  31. Loading rate dependency of strain energy release rate in mode I delamination of composite laminates

    Article • Theoretical and Applied Fracture Mechanics, April 2021, Elsevier

    Professor Mahmood Mehrdad Shokrieh, Dr.ir. René C Alderliesten

  32. Improving the bonding of polyethylene to E-glass/epoxy composites using ultraviolet irradiation

    Article • International Journal of Adhesion and Adhesives, March 2021, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  33. Effects of adding carbon nanofibers on the reduction of matrix cracking in laminated composites: Experimental and analytical approaches

    Article • Polymer Testing, February 2021, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  34. On the R-curve and cohesive law of glass/epoxy end-notch flexure specimens with 0//θ interface fiber angles

    Article • Polymer Testing, January 2021, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  35. Discrimination between the Strain and Temperature Effects of a Cantilever Beam Using a <i>Π</i>-PSFBG Sensor

    Article • January 2021, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  36. Viscoelastic behavior of epoxy resin reinforced with shape-memory-alloy wires

    Article • Journal of Intelligent Material Systems and Structures, December 2020, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  37. A novel model for quantification of the moisture absorption of polymeric laminated composites

    Article • Polymer Testing, November 2020, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  38. Full-Field Measurement of Residual Stresses in Composite Materials Using the Incremental Slitting and Digital Image Correlation Techniques

    Article • Experimental Mechanics, August 2020, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  39. Detection and classification of matrix cracking in laminated composites using guided wave propagation and artificial neural networks

    Article • Composite Structures, August 2020, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  40. Effects of residual stresses induced by repair welding on the fracture toughness of Ni-based IN939 alloy

    Article • Theoretical and Applied Fracture Mechanics, August 2020, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  41. Strain rate effects on the mechanical behavior of single-lap glass/carbon nanofiber/epoxy composite bolted joints

    Article • Journal of Composite Materials, June 2020, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  42. Evaluations of residual stresses in repair welding of Ni-based IN939 superalloy

    Article • Journal of Thermal Stresses, April 2020, Taylor & Francis

    Professor Mahmood Mehrdad Shokrieh

  43. Effect of warp and fill-fiber volume fractions on mechanical properties of glass/epoxy woven fabric composites

    Article • Journal of Composite Materials, April 2020, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  44. Loading rate effects on mode-I delamination in glass/epoxy and glass/CNF/epoxy laminated composites

    Article • Engineering Fracture Mechanics, April 2020, Elsevier

    Professor Mahmood Mehrdad Shokrieh, Dr.ir. René C Alderliesten

  45. A novel model to simulate the formation and healing of cracks in self-healing cross-ply composites under flexural loading

    Article • Composite Structures, March 2020, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  46. Identification of matrix cracking in cross-ply laminated composites using Lamb wave propagation

    Article • Composite Structures, March 2020, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  47. A novel model to predict the stiffness and strength of unidirectional glass/epoxy composites at different strain rates

    Article • Journal of Composite Materials, February 2020, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  48. A novel dynamic constitutive micromechanical model to predict the strain rate dependent mechanical behavior of glass/epoxy laminated composites

    Article • Polymer Testing, February 2020, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  49. Effect of tensile loading rate on interfacial properties of SMA/polymer composites

    Article • Composites Part B Engineering, February 2020, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  50. The effect of electrospinning parameters on the morphology of glass nanofibers

    Article • Journal of the Textile Institute, January 2020, Taylor & Francis

    Professor Mahmood Mehrdad Shokrieh

  51. Manufacturing and drop-weight impact properties of three-dimensional integrated-woven sandwich composite panels with hybrid core

    Article • Journal of Industrial Textiles, January 2020, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  52. Residual stress measurement through the thickness of ball grid array microelectronics packages using incremental hole drilling

    Article • Microelectronics Reliability, November 2019, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  53. A theoretical and experimental investigation on the stress distribution in the interface of pre-strained SMA wire/polymer composites

    Article • Composites Part B Engineering, October 2019, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  54. Development of a physics-based theory for mixed mode I/II delamination onset in orthotropic laminates

    Article • Theoretical and Applied Fracture Mechanics, October 2019, Elsevier

    Professor Mahmood Mehrdad Shokrieh, Dr.ir. René C Alderliesten

  55. Effect of the conversion degree and multiple healing on the healing efficiency of a thermally reversible self‐healing polymer

    Article • Polymers for Advanced Technologies, August 2019, Wiley

    Professor Mahmood Mehrdad Shokrieh

  56. Repeated slitting safe distance in the measurement of residual stresses

    Article • International Journal of Mechanical Sciences, July 2019, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  57. An analytical approach to predict the mechanical behavior of single-lap single-bolt composite joints reinforced with carbon nanofibers

    Article • Composite Structures, May 2019, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  58. A novel self-healing composite made of thermally reversible polymer and shape memory alloy reinforcement

    Article • Journal of Intelligent Material Systems and Structures, April 2019, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  59. Physics of delamination onset in unidirectional composite laminates under mixed-mode I/II loading

    Article • Engineering Fracture Mechanics, April 2019, Elsevier

    Professor Mahmood Mehrdad Shokrieh, Dr.ir. René C Alderliesten

  60. A new model to simulate the creep behavior of graphene/epoxy nanocomposites

    Article • Polymer Testing, March 2019, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  61. Correction to: Fiber Path Optimization in a Variable-Stifness Cylinder to Maximize Its Buckling Load Under External Hydrostatic Pressure

    Article • Mechanics of Composite Materials, March 2019, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  62. Residual stress measurement using the slitting method via a combination of eigenstrain, regularization and series truncation techniques

    Article • International Journal of Mechanical Sciences, January 2019, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  63. Fiber Path Optimization in a Variable-Stifness Cylinder to Maximize Its Buckling Load Under External Hydrostatic Pressure

    Article • Mechanics of Composite Materials, January 2019, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  64. Low Velocity Impact Behavior of 3D Hollow Core Sandwich Composites Produced with Flat-Knitted Spacer Fabrics

    Article • Fibers and Polymers, December 2018, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  65. A new model for the determination of optimum fiber volume fraction under multi-axial loading in polymeric composites

    Article • Iranian Polymer Journal, November 2018, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  66. Assessment of failure toughening mechanisms in continuous glass fiber thermoplastic laminates subjected to cyclic loading

    Article • Composites Part B Engineering, October 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  67. An investigation on effects of acid etching duration on adhesive bonding of polyethylene to E-glass/epoxy composites

    Article • International Journal of Adhesion and Adhesives, October 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  68. Hydrophobic properties of a vulcanized silicone-based nanocomposite coating exposed to heat, sulfuric acidic and the ultraviolet radiation

    Article • Materials Research Express, September 2018, Institute of Physics Publishing

    Professor Mahmood Mehrdad Shokrieh

  69. Strength calculation of graphene/polymer nanocomposites using the combined laminate analogy and progressive damage model

    Article • Mechanics of Materials, September 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  70. Effect of interface fiber angle on the mode I delamination growth of plain woven glass fiber-reinforced composites

    Article • Theoretical and Applied Fracture Mechanics, September 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  71. A new mixed mode I/II failure criterion for laminated composites considering fracture process zone

    Article • Theoretical and Applied Fracture Mechanics, September 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh, Dr.ir. René C Alderliesten

  72. An eigen-strain approach on the estimation of non-uniform residual stress distribution using incremental hole-drilling and slitting techniques

    Article • International Journal of Mechanical Sciences, August 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  73. An experimental investigation on the viscoelastic properties of CNT reinforced CY 219 epoxy resin, using DMTA and creep tests

    Article • Materials Research Express, July 2018, Institute of Physics Publishing

    Professor Mahmood Mehrdad Shokrieh

  74. Effect of CNT structural defects on the mechanical properties of CNT/Epoxy nanocomposite

    Article • Physica B Condensed Matter, July 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  75. The effective stiffness of an embedded graphene in a polymeric matrix

    Article • Current Applied Physics, May 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  76. Axisymmetric equilibrium of an isotropic elastic solid circular finite cylinder

    Article • Mathematics and Mechanics of Solids, April 2018, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  77. A micromechanical model for prediction of mixed mode I/II delamination of laminated composites considering fiber bridging effects

    Article • Theoretical and Applied Fracture Mechanics, April 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  78. The effect of agglomeration on the fracture toughness of CNTs-reinforced nanocomposites

    Article • Theoretical and Applied Fracture Mechanics, April 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  79. Micromechanical modelling of the compression strength of three-dimensional integrated woven sandwich composites

    Article • Journal of Industrial Textiles, March 2018, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  80. On the behavior of isolated and embedded carbon nano-tubes in a polymeric matrix

    Article • Materials Research Express, February 2018, Institute of Physics Publishing

    Professor Mahmood Mehrdad Shokrieh

  81. Synthesis and characterization of N-hydroxyphthalimide immobilized on NaY nano-zeolite as a novel and efficient catalyst for the selective oxidation of hydrocarbons and benzyl alcohols

    Article • Reaction Kinetics Mechanisms and Catalysis, February 2018, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  82. Assessment of the thermomechanical performance of continuous glass fiber-reinforced thermoplastic laminates

    Article • Polymer Testing, February 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  83. A modified micromechanical model to predict the creep modulus of polymeric nanocomposites

    Article • Polymer Testing, February 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  84. Multiscale modeling of the viscoelastic properties of CNT/polymer nanocomposites, using complex and time-dependent homogenizations

    Article • Computational Materials Science, February 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  85. Processability and tensile performance of continuous glass fiber/polyamide laminates for structural load-bearing applications

    Article • Composites Part A Applied Science and Manufacturing, February 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  86. Expression of concern

    Article • Materials & Design, February 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  87. Synthesis and characterization of N-hydroxyphthalimide immobilized on SiO2-coated Fe3O4 nanoparticles as magnetic catalyst for oxidation of benzyl alcohols and hydrocarbons

    Article • Journal of the Iranian Chemical Society, January 2018, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  88. Characterization of Tensile and Compressive Properties of Basalt/Epoxy Composites Under Stress Corrossion Conditions

    Article • Mechanics of Composite Materials, January 2018, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  89. Fatigue behavior of laminated glass fiber reinforced polyamide

    Article • Procedia Engineering, January 2018, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  90. Multi-scale modeling of triaxial braided composites for FE-based modal analysis of hybrid metal-composite gears

    Article • Composite Structures, December 2017, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  91. Simulation of stiffness of randomly-distributed-graphene/epoxy nanocomposites using a combined finite element-micromechanics method

    Article • Mechanics of Materials, December 2017, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  92. A Novel Technique to Simulate Reduced Residual Stresses in Laminated Composites Using Nanoparticles

    Article • Iranian Journal of Science and Technology Transactions of Mechanical Engineering, October 2017, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  93. Effect of shape memory alloy wires on the enhancement of fracture behavior of epoxy polymer

    Article • Polymer Testing, October 2017, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  94. Mechanical behavior of polyester polymer concrete under low strain rate loading conditions

    Article • Polymer Testing, September 2017, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  95. Dependency of bridging traction of DCB composite specimen on interface fiber angle

    Article • Theoretical and Applied Fracture Mechanics, August 2017, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  96. Flexural behavior of composites reinforced with innovative 3D integrated weft-knitted spacer fabrics

    Article • Journal of Industrial Textiles, July 2017, SAGE Publications

    Dr. Hossein Hasani, Professor Mahmood Mehrdad Shokrieh

  97. A novel laminate analogy to calculate the strength of two-dimensional randomly oriented short-fiber composites

    Article • Composites Science and Technology, July 2017, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  98. Experimental and numerical investigation of buckling behavior of composite cylinders with cutout

    Article • Thin-Walled Structures, July 2017, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  99. A general micromechanical model to predict elastic and strength properties of balanced plain weave fabric composites

    Article • Journal of Composite Materials, June 2017, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  100. The structural and tensile properties of glass/polyester co-wrapped hybrid yarns

    Article • Journal of Industrial Textiles, June 2017, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  101. On the mixed mode I/II delamination R-curve of E-glass/epoxy laminated composites

    Article • Composite Structures, March 2017, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  102. Post buckling analysis of shallow composite shells based on the third order shear deformation theory

    Article • Aerospace Science and Technology, March 2017, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  103. On the constant parameters of Halpin-Tsai equation

    Article • Polymer, October 2016, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  104. A micro–macro homogenization scheme for elastic composites containing high volume fraction multi-shape inclusions

    Article • Computational Materials Science, August 2016, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  105. An optimized representative volume element to predict the stiffness of aligned short fiber composites

    Article • Journal of Composite Materials, July 2016, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  106. Effect of CNTs debonding on mode I fracture toughness of polymeric nanocomposites

    Article • Materials & Design, July 2016, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  107. Estimation of Residual Stresses in Laminated Composites by Slitting Method Utilizing Eigen Strains

    Article • Journal of Engineering Materials and Technology, June 2016, ASME International

    Professor Mahmood Mehrdad Shokrieh

  108. The effect of time-dependent slightly weakened interface on the viscoelastic properties of CNT/polymer nanocomposites

    Article • Composite Structures, June 2016, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  109. Effect of interface fiber angle on the R-curve behavior of E-glass/epoxy DCB specimens

    Article • Theoretical and Applied Fracture Mechanics, June 2016, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  110. A dynamic constitutive-micromechanical model to predict the strain rate-dependent mechanical behavior of carbon nanofiber/epoxy nanocomposites

    Article • Iranian Polymer Journal, May 2016, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  111. A modified model for simulation of mode I delamination growth in laminated composite materials

    Article • Theoretical and Applied Fracture Mechanics, April 2016, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  112. An experimental and numerical study of the dynamic response of composites under impact at low temperatures

    Article • Mechanics of Advanced Materials and Structures, January 2016, Taylor & Francis

    Professor Mahmood Mehrdad Shokrieh

  113. Determination of the Appropriate Gradient Elasticity Theory for Bending Analysis of Nano-beams by Considering Boundary Conditions Effect

    Article • Latin American Journal of Solids and Structures, December 2015, FapUNIFESP (SciELO)

    Professor Mahmood Mehrdad Shokrieh

  114. A combined micromechanical-energy method to predict the fatigue life of nanoparticles/chopped strand mat/polymer hybrid nanocomposites

    Article • Composite Structures, December 2015, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  115. A Novel Polymer Concrete Made From Fine Silica Sand and Polyester

    Article • Mechanics of Composite Materials, November 2015, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  116. Response to the discussion on von-Mises stress attenuation along crown line of CHS T-joints

    Article • Journal of Constructional Steel Research, July 2015, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  117. Hybrid Polyvinyl Alcohol and Cellulose Fiber Pulp Instead of Asbestos Fibers in Cement-Based Composites

    Article • Mechanics of Composite Materials, May 2015, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  118. FRP wrapping for the rehabilitation of Circular Hollow Section (CHS) tubular steel connections

    Article • Thin-Walled Structures, May 2015, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  119. Effects of carbon nanotube content on the mechanical and electrical properties of epoxy-based composites

    Article • Carbon, April 2015, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  120. A strain-rate dependent micromechanical constitutive model for glass/epoxy composites

    Article • Composite Structures, March 2015, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  121. Nano silica-bonded aminoethylpiperazine: a highly efficient and reusable heterogeneous catalyst for the synthesis of 4H-chromene and 12H-chromeno[2,3-d]pyrimidine derivatives

    Article • Journal of the Iranian Chemical Society, February 2015, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  122. A depth dependent transversely isotropic micromechanic model of articular cartilage

    Article • Journal of Materials Science Materials in Medicine, February 2015, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  123. A combined micromechanical–numerical model to simulate shear behavior of carbon nanofiber/epoxy nanocomposites

    Article • Materials & Design (1980-2015), February 2015, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  124. Retraction notice

    Article • Journal of Thermoplastic Composite Materials, February 2015, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  125. Mechanical properties modification of a thin film phenolic resin filled with nano silica particles

    Article • Computational Materials Science, January 2015, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  126. Toughening mechanisms of nanoparticle-reinforced polymers

    Article • January 2015, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  127. Effects of carbon nanotube content on the mechanical and electrical properties of epoxy-based composites

    Article • New Carbon Materials, December 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  128. A novel combined molecular dynamics–micromechanics method for modeling of stiffness of graphene/epoxy nanocomposites with randomly distributed graphene

    Article • Materials & Design (1980-2015), December 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  129. Model for analyzing the mechanical behavior of articular cartilage under creep indentation test

    Article • Journal of Applied Physics, November 2014, American Institute of Physics

    Professor Mahmood Mehrdad Shokrieh

  130. Flexural fatigue behavior of synthesized graphene/carbon-nanofiber/epoxy hybrid nanocomposites

    Article • Materials & Design (1980-2015), October 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  131. Stiffness prediction of graphene nanoplatelet/epoxy nanocomposites by a combined molecular dynamics–micromechanics method

    Article • Computational Materials Science, September 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  132. Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings – An experimental study

    Article • Construction and Building Materials, August 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  133. An Innovative Randomly Oriented Laminated Composite Model for Articular Cartilage Tissue

    Article • Journal of Biomaterials and Tissue Engineering, August 2014, American Scientific Publishers

    Professor Mahmood Mehrdad Shokrieh

  134. Transversely isotropic micromechanics model to determine effect of collagen fibre angle in mechanical properties of articular cartilage

    Article • Materials Technology, July 2014, Taylor & Francis

    Professor Mahmood Mehrdad Shokrieh

  135. Characterization and simulation of impact behavior of graphene/polypropylene nanocomposites using a novel strain rate–dependent micromechanics model

    Article • Journal of Composite Materials, July 2014, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  136. Investigation of Strain Rate Effects on the Dynamic Response of a Glass/Epoxy Composite Plate Under Blast Loading by Using the Finite-Difference Method

    Article • Mechanics of Composite Materials, July 2014, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  137. Compressive Properties of Nanoclay-Reinforced Syntactic Foams at Quasi-Static and High Strain Rate Loading

    Article • Polymer-Plastics Technology and Engineering, June 2014, Taylor & Francis

    Associate Professor Homayoun Hadavinia, Gholamhossein Liaghat, Professor Mahmood Mehrdad Shokrieh

  138. First strain gradient elasticity solution for nanotube-reinforced matrix problem

    Article • Composite Structures, June 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  139. Effect of ply stacking sequence on buckling behavior of E-glass/epoxy laminated composites

    Article • Computational Materials Science, June 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  140. Quasi-static and dynamic compressive properties of ceramic microballoon filled syntactic foam

    Article • Journal of Composite Materials, May 2014, SAGE Publications

    Associate Professor Homayoun Hadavinia, Professor Mahmood Mehrdad Shokrieh, Gholamhossein Liaghat

  141. Strain-rate dependent micromechanical method to investigate the strength properties of glass/epoxy composites

    Article • Composite Structures, May 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  142. Fatigue modeling of chopped strand mat/epoxy composites

    Article • STRUCTURAL ENGINEERING AND MECHANICS, April 2014, Techno-Press

    Professor Mahmood Mehrdad Shokrieh

  143. Effects of graphene nanoplatelets and graphene nanosheets on fracture toughness of epoxy nanocomposites

    Article • Fatigue & Fracture of Engineering Materials & Structures, April 2014, Wiley

    Professor Mahmood Mehrdad Shokrieh

  144. Evaluating the effects of multi-walled carbon nanotubes on the mechanical properties of chopped strand mat/polyester composites

    Article • Materials & Design (1980-2015), April 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  145. Characterization of residual stresses in a thin-walled filament wound carbon/epoxy ring using incremental hole drilling method

    Article • Composites Science and Technology, April 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  146. Modeling of sheet molding compound compression molding under non-isothermal conditions

    Article • Journal of Reinforced Plastics and Composites, March 2014, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  147. Effect of initial crack length on the measured bridging law of unidirectional E-glass/epoxy double cantilever beam specimens

    Article • Materials & Design (1980-2015), March 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  148. Experimental investigation of FRP-strengthened tubular T-joints under axial compressive loads

    Article • Construction and Building Materials, February 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  149. Effects of graphene on fracture toughness of epoxy nanocomposites

    Article • Fatigue & Fracture of Engineering Materials & Structures, January 2014, Wiley

    Professor Mahmood Mehrdad Shokrieh

  150. Reduction of thermal residual stresses of laminated polymer composites by addition of carbon nanotubes

    Article • Materials & Design (1980-2015), January 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  151. Understanding residual stresses in polymer matrix composites

    Article • January 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  152. The importance of measuring residual stresses in composite materials

    Article • January 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  153. Reduction of residual stresses in polymer composites using nano-additives

    Article • January 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  154. Non-destructive testing (NDT) techniques in the measurement of residual stresses in composite materials: an overview

    Article • January 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  155. Modeling residual stresses in composite materials

    Article • January 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  156. Measuring residual stresses in composite materials using the slitting/crack compliance method

    Article • January 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  157. Measuring residual stresses in composite materials using the simulated hole-drilling method

    Article • January 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh, Dr Ahmad Reza Ghasemi

  158. Introduction

    Article • January 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  159. Destructive techniques in the measurement of residual stresses in composite materials: an overview

    Article • January 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  160. Residual Stresses in Composite Materials

    Article • January 2014, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  161. Strain rate dependent micromechanical modeling of reinforced polymers with carbon nanotubes

    Article • Journal of Composite Materials, December 2013, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  162. Effect of stacking sequence on failure mode of fiber metal laminates under low-velocity impact

    Article • Iranian Polymer Journal, December 2013, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  163. Characterization and simulation of tensile behavior of graphene/polypropylene nanocomposites using a novel strain-rate-dependent micromechanics model

    Article • Journal of Thermoplastic Composite Materials, November 2013, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  164. A novel model to predict the fatigue life of thermoplastic nanocomposites

    Article • Journal of Thermoplastic Composite Materials, November 2013, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  165. Prediction of Mechanical Properties of CNT Based Composites Using Multi-Scale Modeling and Stochastic Analysis

    Article • October 2013, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  166. Similitude Study of Impacted Composite Laminates under Buckling Loading

    Article • Journal of Engineering Mechanics, October 2013, American Society of Civil Engineers (ASCE)

    Professor Mahmood Mehrdad Shokrieh

  167. Displacement-controlled flexural bending fatigue behavior of graphene/epoxy nanocomposites

    Article • Journal of Composite Materials, September 2013, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  168. A Novel Method for Calculation of Strain Energy Release Rate of Asymmetric Double Cantilever Laminated Composite Beams

    Article • Applied Composite Materials, August 2013, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  169. The use of carbon nanofibers for thermal residual stress reduction in carbon fiber/epoxy laminated composites

    Article • Carbon, August 2013, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  170. Improvement of mechanical and electrical properties of epoxy resin with carbon nanofibers

    Article • Iranian Polymer Journal, July 2013, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  171. Slitting Measurement of Residual Hoop Stresses Through the Wall-Thickness of a Filament Wound Composite Ring

    Article • Experimental Mechanics, June 2013, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  172. Numerical investigation of FRP-strengthened tubular T-joints under axial compressive loads

    Article • Composite Structures, June 2013, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  173. Isolation of residual shear stress effects in slitting measurement of residual normal stress in laminated composites

    Article • Journal of Composite Materials, March 2013, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  174. Effect of Graphene Nanosheets (GNS) and Graphite Nanoplatelets (GNP) on the Mechanical Properties of Epoxy Nanocomposites

    Article • Science of Advanced Materials, March 2013, American Scientific Publishers

    Professor Mahmood Mehrdad Shokrieh

  175. Nanoindentation and nanoscratch investigations on graphene-based nanocomposites

    Article • Polymer Testing, February 2013, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  176. Finite element modeling of mode I delamination growth in laminated DCB specimens with R-curve effects

    Article • Composites Part B Engineering, February 2013, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  177. A comparison between the slitting method and the classical lamination theory in determination of macro-residual stresses in laminated composites

    Article • Composite Structures, February 2013, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  178. Determination of non-uniform residual stresses in laminated composites using integral hole drilling method: Experimental evaluation

    Article • Journal of Composite Materials, January 2013, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh, Dr Ahmad Reza Ghasemi

  179. The influence of hybridization on impact damage behavior and residual compression strength of intraply basalt/nylon hybrid composites

    Article • Materials & Design (1980-2015), January 2013, Elsevier

    Professor Mahmood Mehrdad Shokrieh, Professor Giangiacomo Minak

  180. Detail investigation on un-stiffened T/Y tubular joints behavior under axial compressive loads

    Article • Journal of Constructional Steel Research, January 2013, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  181. Mechanical properties of multi-walled carbon nanotube/polyester nanocomposites

    Article • Journal of Nanostructure in Chemistry, January 2013, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  182. Designing and manufacturing of a drop weight impact test machine

    Article • Engineering Solid Mechanics, January 2013, Growing Science

    Professor Mahmood Mehrdad Shokrieh

  183. Simulation of mode I delamination propagation in multidirectional composites with R-curve effects using VCCT method

    Article • Computational Materials Science, December 2012, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  184. Corrosion behaviour and crack formation mechanism of basalt fibre in sulphuric acid

    Article • Corrosion Science, November 2012, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  185. Shrinkage and mechanical properties of unsaturated polyester reinforced with clay and core–shell rubber

    Article • Iranian Polymer Journal, October 2012, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  186. Experimental determination of tensile strength and KIcof polymer concretes using semi-circular bend (SCB) specimens

    Article • STRUCTURAL ENGINEERING AND MECHANICS, September 2012, Techno-Press

    Professor Mahmood Mehrdad Shokrieh

  187. Fatigue life prediction of nanoparticle/fibrous polymeric composites based on the micromechanical and normalized stiffness degradation approaches

    Article • Journal of Materials Science, September 2012, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  188. Fabrication and mechanical properties of clay/epoxy nanocomposite and its polymer concrete

    Article • Materials & Design (1980-2015), September 2012, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  189. Unsaturated polyester-based hybrid nanocomposite: fracture behavior and tensile properties

    Article • Journal of Polymer Research, August 2012, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  190. A new three-dimensional analytical model to simulate microresidual stresses in polymer matrix composites

    Article • Mechanics of Composite Materials, July 2012, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  191. Development of a full range multi-scale model to obtain elastic properties of CNT/polymer composites

    Article • Iranian Polymer Journal, May 2012, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  192. Progressive failure analysis of glass/epoxy composites at low temperatures

    Article • Strength of Materials, May 2012, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  193. Rubber modification of unsaturated polyester resin with core-shell rubber particles: Effect of shell composition

    Article • Polymer Engineering & Science, March 2012, Wiley

    Professor Mahmood Mehrdad Shokrieh

  194. Influence of curved delamination front on toughness of multidirectional DCB specimens

    Article • Composite Structures, March 2012, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  195. A micromechanical study on longitudinal strength of fibrous composites exposed to acidic environment

    Article • Materials & Design (1980-2015), March 2012, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  196. Interlaminar fracture toughness of unidirectional DCB specimens: A novel theoretical approach

    Article • Polymer Testing, February 2012, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  197. Delamination R-curve as a material property of unidirectional glass/epoxy composites

    Article • Materials & Design (1980-2015), February 2012, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  198. A new analytical model for calculation of stiffness of three-dimensional four-directional braided composites

    Article • Composite Structures, February 2012, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  199. Effect of Residual Shear Stresses on Released Strains in Isotopic and Orthotropic Materials Measured by the Slitting Method

    Article • Journal of Engineering Materials and Technology, January 2012, ASME International

    Professor Mahmood Mehrdad Shokrieh

  200. A new method for evaluation of mechanical properties of glass/epoxy composites at low temperatures

    Article • Strength of Materials, January 2012, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  201. Experimental, analytical, and numerical studies of composite sandwich panels under low-velocity impact loadings

    Article • Mechanics of Composite Materials, December 2011, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  202. The ballistic resistance of multi-layered targets impacted by rigid projectiles

    Article • Materials Science and Engineering A, December 2011, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  203. Electrochemical behavior of isoproterenol in the presence of uric acid and folic acid at a carbon paste electrode modified with 2,7-bis(ferrocenyl ethyl)fluoren-9-one and carbon nanotubes

    Article • Journal of Solid State Electrochemistry, November 2011, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  204. Effect of stacking sequence on R-curve behavior of glass/epoxy DCB laminates with 0°//0° crack interface

    Article • Materials Science and Engineering A, November 2011, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  205. Calculation of for a multidirectional composite double cantilever beam on two-parametric elastic foundation

    Article • Aerospace Science and Technology, October 2011, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  206. Strength behavior and crack-formation mechanisms of E-glass fiber exposed to sulfuric acid environment

    Article • Journal of Composite Materials, September 2011, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  207. Three-dimensional analysis of micro-residual stresses in fibrous composites based on the energy method: a study including interphase effects

    Article • Journal of Composite Materials, September 2011, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  208. Mixed mode brittle fracture in epoxy/multi-walled carbon nanotube nanocomposites

    Article • Engineering Fracture Mechanics, September 2011, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  209. Effects of imperfect adhesion on thermal micro-residual stresses in polymer matrix composites

    Article • International Journal of Adhesion and Adhesives, September 2011, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  210. A Dynamic Transient Model to Simulate the Time Dependent Pultrusion Process of Glass/Polyester Composites

    Article • Applied Composite Materials, August 2011, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  211. Simulation of slitting method for calculation of compliance functions of laminated composites

    Article • Journal of Composite Materials, August 2011, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  212. Effect of fibre transverse isotropy on micro-residual stresses in polymeric composites

    Article • The Journal of Strain Analysis for Engineering Design, August 2011, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  213. Multiscale modeling for mechanical properties of carbon nanotube reinforced nanocomposites subjected to different types of loading

    Article • Composite Structures, August 2011, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  214. Effects of thermal cycles on mechanical properties of an optimized polymer concrete

    Article • Construction and Building Materials, August 2011, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  215. Effect of multi-walled carbon nanotube aspect ratio on mechanical and electrical properties of epoxy-based nanocomposites

    Article • Polymer Testing, August 2011, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  216. Correlation between aspect ratio of MWCNTs and mixed mode fracture of epoxy based nanocomposites

    Article • Materials Science and Engineering A, July 2011, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  217. Fracture toughness of epoxy/multi-walled carbon nanotube nano-composites under bending and shear loading conditions

    Article • Materials & Design (1980-2015), April 2011, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  218. Fabrication of Multi-Walled Carbon Nanotube/Vinyl Ester Nanocomposites: Dispersion and Stabilization

    Article • Defect and Diffusion Forum, April 2011, Trans Tech Publications

    Professor Mahmood Mehrdad Shokrieh

  219. Friction Forces between Sheet Molding Compound Charge and Mold Cavity Surface in Compression Molding

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor Mahmood Mehrdad Shokrieh

  220. A comparative study for beams on elastic foundation models to analysis of mode-I delamination in DCB specimens

    Article • STRUCTURAL ENGINEERING AND MECHANICS, January 2011, Techno-Press

    Professor Mahmood Mehrdad Shokrieh

  221. Three-dimensional modeling and experimental validation of heat transfer in polymer matrix composites exposed to fire

    Article • Journal of Composite Materials, January 2011, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  222. Investigating the transverse behavior of Glass–Epoxy composites under intermediate strain rates

    Article • Composite Structures, January 2011, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  223. Electroanalysis and Simultaneous Determination of 6-Thioguanine in the Presence of Uric Acid and Folic Acid Using a Modified Carbon Nanotube Paste Electrode

    Article • Analytical Sciences, January 2011, Japan Society for Analytical Chemistry

    Professor Mahmood Mehrdad Shokrieh

  224. Stochastic multi-scale modeling of CNT/polymer composites

    Article • Computational Materials Science, December 2010, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  225. Multi-scale modeling of nonlinear mechanical behavior of polymer/SWNT nanocomposites: Investigation of interphase

    Article • December 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Mahmood Mehrdad Shokrieh

  226. Analytical model of sound transmission through relatively thick FGM cylindrical shells considering third order shear deformation theory

    Article • Composite Structures, December 2010, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  227. An analytical method for calculating stiffness of two-dimensional tri-axial braided composites

    Article • Composite Structures, November 2010, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  228. Determination of maximum negative Poisson's ratio for laminated fiber composites

    Article • physica status solidi (b), October 2010, Wiley

    Professor Mahmood Mehrdad Shokrieh

  229. Low velocity impact properties of intra-ply hybrid composites based on basalt and nylon woven fabrics

    Article • Materials & Design (1980-2015), September 2010, Elsevier

    Professor Mahmood Mehrdad Shokrieh, Professor Giangiacomo Minak

  230. Investigation of nanotube length effect on the reinforcement efficiency in carbon nanotube based composites

    Article • Composite Structures, September 2010, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  231. Dynamic Progressive Damage Modeling of Fiber-reinforced Composites Under Different Strain Rates

    Article • Journal of Composite Materials, August 2010, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  232. A review of the mechanical properties of isolated carbon nanotubes and carbon nanotube composites

    Article • Mechanics of Composite Materials, June 2010, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  233. A New Method for Modeling of Initiation and Propagation of Delamination Between [0/θo] Layers of Laminated Composites

    Article • Applied Composite Materials, April 2010, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  234. Prediction of mechanical properties of an embedded carbon nanotube in polymer matrix based on developing an equivalent long fiber

    Article • Mechanics Research Communications, March 2010, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  235. Prediction of Young’s modulus of graphene sheets and carbon nanotubes using nanoscale continuum mechanics approach

    Article • Materials & Design (1980-2015), February 2010, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  236. On the tensile behavior of an embedded carbon nanotube in polymer matrix with non-bonded interphase region

    Article • Composite Structures, February 2010, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  237. Transient Response of Strain Rate Dependent Composite Plates Using Finite Difference Method

    Article • January 2010, ASME International

    Professor Mahmood Mehrdad Shokrieh

  238. Investigation of Residual Thermal Stresses in Fiber-Reinforced Composites Incorporating Inhomogeneous Interphase Region

    Article • January 2010, ASME International

    Professor Mahmood Mehrdad Shokrieh

  239. Fatigue life prediction of wind turbine rotor blades manufactured from composites

    Article • January 2010, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  240. Fatigue life prediction of composite materials based on progressive damage modeling

    Article • January 2010, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  241. Copper-Catalyzed Coupling of Aryl Halides with Terminal Alkynes in the Presence of KF/Al2O3

    Article • Synthetic Communications, December 2009, Taylor & Francis

    Professor Mahmood Mehrdad Shokrieh

  242. Stress Corrosion Cracking of Basalt/Epoxy Composites under Bending Loading

    Article • Applied Composite Materials, December 2009, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  243. Experimental and analytical studies on one-way concrete slabs reinforced with GFRP molded gratings

    Article • Steel and Composite Structures, November 2009, Techno-Press

    Professor Mahmood Mehrdad Shokrieh

  244. Progressive Fatigue Damage Modeling of Cross-ply Laminates, I: Modeling Strategy

    Article • Journal of Composite Materials, November 2009, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  245. Progressive Fatigue Damage Modeling of Cross-ply Laminates, II: Experimental Evaluation

    Article • Journal of Composite Materials, November 2009, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  246. Investigation of strain rate effects on in-plane shear properties of glass/epoxy composites

    Article • Composite Structures, November 2009, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  247. Effect of fiber orientation and cross section of composite tubes on their energy absorption ability in axial dynamic loading

    Article • Mechanics of Composite Materials, November 2009, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  248. Compressive response of glass–fiber reinforced polymeric composites to increasing compressive strain rates

    Article • Composite Structures, August 2009, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  249. Tension behavior of unidirectional glass/epoxy composites under different strain rates

    Article • Composite Structures, May 2009, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  250. Analytical and numerical techniques for predicting the interfacial stresses of wavy carbon nanotube/polymer composites

    Article • Mechanics of Composite Materials, March 2009, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  251. Design of Modified Tabs for Testing of Symmetric Composite Thin Walled Tubes Under Pure Torsional and Tensile Loadings

    Article • Experimental Mechanics, February 2009, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  252. Development of a strain-rate dependent progressive damage model for crash analysis of composite laminates

    Article • January 2009, EDP Sciences

    Professor Mahmood Mehrdad Shokrieh

  253. An Experimental Evaluation of Micromechanical Approaches for Damping Characterization of Polymer Matrix Composites

    Article • Journal of Composite Materials, October 2008, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  254. Residual stiffness in cross-ply laminates subjected to cyclic loading

    Article • Composite Structures, October 2008, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  255. A STUDY ON BUCKLING BEHAVIOR OF COMPOSITE SHEETS REINFORCED BY HYBRID WOVEN FABRICS

    Article • Transactions of the Canadian Society for Mechanical Engineering, March 2008, Canadian Science Publishing

    Professor Mahmood Mehrdad Shokrieh

  256. Penetration analysis of a projectile in ceramic composite armor

    Article • Composite Structures, January 2008, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  257. Generalized Technique for Cumulative Damage Modeling of Composite Laminates

    Article • Journal of Composite Materials, November 2007, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  258. Effects of Ultraviolet Radiation on Mechanical Properties of Glass/Polyester Composites

    Article • Journal of Composite Materials, October 2007, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh, Dr ALIREZA BAYAT

  259. Determination of Calibration Factors of the Hole Drilling Method for Orthotropic Composites using an Exact Solution

    Article • Journal of Composite Materials, July 2007, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh, Dr Ahmad Reza Ghasemi

  260. Damping Characterization and Viscoelastic Behavior of Laminated Polymer Matrix Composites Using a Modified Classical Lamination Theory

    Article • Experimental Mechanics, April 2007, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  261. Effects of Young’s modulus on response of railway sleeper

    Article • Applied Mathematical Modelling, April 2007, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  262. On the reinforcement of concrete sleepers by composite materials

    Article • Composite Structures, December 2006, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  263. Experimental evaluation of dynamic behavior of metallic plates reinforced by polymer matrix composites

    Article • Composite Structures, September 2006, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  264. A unified fatigue life model based on energy method

    Article • Composite Structures, September 2006, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  265. Simulation of fatigue failure in a full composite wind turbine blade

    Article • Composite Structures, August 2006, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  266. Simulation of Central Hole Drilling Process for Measurement of Residual Stresses in Isotropic, Orthotropic, and Laminated Composite Plates

    Article • Journal of Composite Materials, May 2006, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh, Dr Ahmad Reza Ghasemi

  267. Damage behavior of fiber reinforced composite plates subjected to drop weight impacts

    Article • Composites Science and Technology, January 2006, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  268. 2,6-Dicarboxypyridinium Fluorochromate: A Mild and Efficient Reagent for Oxidative Deprotection of Trimethylsilyl Ethers to Their Corresponding Carbonyl Compounds

    Article • Phosphorus Sulfur and Silicon and the Related Elements, October 2005, Taylor & Francis

    Professor Mahmood Mehrdad Shokrieh

  269. Theoretical and Experimental Studies on Residual Stresses in Laminated Polymer Composites

    Article • Journal of Composite Materials, June 2005, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  270. Parametric study of automotive composite bumper beams subjected to low-velocity impacts

    Article • Composite Structures, May 2005, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  271. Reinforcement of Metallic Plates with Composite Materials

    Article • Journal of Composite Materials, April 2005, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  272. Estimating junction temperature of high-flux white LEDs

    Article • June 2004, SPIE

    Professor Mahmood Mehrdad Shokrieh

  273. Shear buckling of a composite drive shaft under torsion

    Article • Composite Structures, April 2004, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  274. Selective Iodination of Alcohols with NaI/Amberlyst 15 in Acetonitrile

    Article • Synlett, January 2004, Thieme Publishing Group

    Professor Mahmood Mehrdad Shokrieh

  275. Fatigue under multiaxial stress systems

    Article • November 2003, Taylor & Francis

    Professor Mahmood Mehrdad Shokrieh

  276. Analysis and optimization of a composite leaf spring

    Article • Composite Structures, May 2003, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  277. A fully non-linear 3-D constitutive relationship for the stress analysis of a pin-loaded composite laminate

    Article • Composites Science and Technology, February 2002, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  278. Wing instability of a full composite aircraft

    Article • Composite Structures, November 2001, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  279. Progressive Fatigue Damage Modeling of Composite Materials, Part II: Material Characterization and Model Verification

    Article • Journal of Composite Materials, July 2000, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  280. Progressive Fatigue Damage Modeling of Composite Materials, Part I: Modeling

    Article • Journal of Composite Materials, July 2000, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  281. Progressive Fatigue Damage Modeling of Composite Materials, Part II: Material Characterization and Model Verification

    Article • Journal of Composite Materials, January 2000, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  282. Progressive Fatigue Damage Modeling of Composite Materials, Part I: Modeling

    Article • Journal of Composite Materials, January 2000, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  283. Statistical model for multiaxial fatigue behavior of unidirectional plies

    Article • Composites Science and Technology, October 1999, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  284. An Assessment of the Double-Notch Shear Test for Interlaminar Shear Characterization of a Unidirectional Graphite/Epoxy under Static and Fatigue Loading

    Article • Applied Composite Materials, September 1998, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  285. Article • Applied Composite Materials, January 1998, Springer Science + Business Media

    Professor Mahmood Mehrdad Shokrieh

  286. Multiaxial fatigue behaviour of unidirectional plies based on uniaxial fatigue experiments—II. Experimental evaluation

    Article • International Journal of Fatigue, March 1997, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  287. Multiaxial fatigue behaviour of unidirectional plies based on uniaxial fatigue experiments — I. Modelling

    Article • International Journal of Fatigue, March 1997, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  288. Three-dimensional stress analysis of free-edge effects in a simple composite cross-ply laminate

    Article • International Journal of Solids and Structures, June 1996, Elsevier

    Professor Mahmood Mehrdad Shokrieh

  289. Effects of Material Nonlinearity on the Three-Dimensional Stress State of Pin-Loaded Composite Laminates

    Article • Journal of Composite Materials, May 1996, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  290. Testing of In-Plane Shear Properties under Fatigue Loading

    Article • Journal of Reinforced Plastics and Composites, September 1995, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  291. Two-Dimensional Modeling of Composite Pinned-Joint Failure

    Article • Journal of Composite Materials, March 1995, SAGE Publications

    Professor Mahmood Mehrdad Shokrieh

  292. Modification of the Three-Rail Shear Test for Composite Materials Under Static and Fatigue Loading

    Article • ASTM International

    Professor Mahmood Mehrdad Shokrieh

  293. Determination of Stochastic Properties of Carbon Nanotube-Epoxy Composites

    Article • Civil-Comp, Ltd.

    Professor Mahmood Mehrdad Shokrieh

  294. Characterization of a Graphite/Epoxy Composite Under In-Plane Shear Fatigue Loading

    Article • ASTM International

    Professor Mahmood Mehrdad Shokrieh