Contact

All Stories

  1. Numerical Analysis of Cement Placement into Drilling Fluid in Oilwell Applications

    Article • Materials, June 2025, MDPI AG

    Distinguished Professor Goodarz Ahmadi

  2. An entropy-based random-walk model for predicting in-plane thermal conductivity of porous media

    Article • International Communications in Heat and Mass Transfer, May 2025, Elsevier

    Distinguished Professor Goodarz Ahmadi

  3. Backward injection of liquid jets in crossflow

    Article • Physics of Fluids, April 2025, American Institute of Physics

    Distinguished Professor Goodarz Ahmadi

  4. Electrostatically-Assisted Removal of Charged Bumpy and Rough Particles in Turbulent Airflows

    Article • ECS Journal of Solid State Science and Technology, March 2025, The Electrochemical Society

    Distinguished Professor Goodarz Ahmadi

  5. Numerical study of fluid-structure interaction for enhanced heat transfer in microchannels with an oscillating elastic wall

    Article • Case Studies in Thermal Engineering, December 2024, Elsevier

    Distinguished Professor Goodarz Ahmadi

  6. Enhancing CMP Performance of Micro-Structured Pad Patterns: CFD Simulations and Experimental Evaluations

    Article • ECS Journal of Solid State Science and Technology, November 2024, The Electrochemical Society

    Distinguished Professor Goodarz Ahmadi

  7. Scouring and bed morphology dynamics in a sharp bend with collared pier under unsteady flow

    Article • Hydrological Sciences Journal, October 2024, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  8. (Dielectric Science and Technology Division Poster Award, 1st Place) The Influence of Pad Micro-Features on Chemical Mechanical Polishing (CMP) Performance: Insights from Computational Fluid Dynamics (CFD)

    Article • ECS Meeting Abstracts, August 2024, The Electrochemical Society

    Distinguished Professor Goodarz Ahmadi

  9. Electrical Cleaning of Rough Spherical and Bumpy Abrasive Particles Charged by Corona Ions in Post-CMP

    Article • ECS Meeting Abstracts, August 2024, The Electrochemical Society

    Distinguished Professor Goodarz Ahmadi

  10. Investigating Slurry Flow Patterns in Chemical Mechanical Polishing (CMP) Using Computational Fluid Dynamic (CFD) Simulations

    Article • ECS Meeting Abstracts, August 2024, The Electrochemical Society

    Distinguished Professor Goodarz Ahmadi

  11. Film flow boiling of a magnetic fluid over a vertical plate exposed to a magnetic field under reduced gravity conditions

    Article • Numerical Heat Transfer Part A Applications, January 2024, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  12. Use of air curtains for creating safe areas in bodybuilding salons for controlling the spread of SARS-CoV-2-carrying respiratory droplets

    Article • The European Physical Journal Plus, January 2024, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  13. A new probabilistic long-period critical excitation procedure for isolated building structures

    Article • Mechanics Based Design of Structures and Machines, January 2024, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  14. Experimental analysis of submerged vanes' configuration for mitigating local scour at piers in a sharp bend: Influence of quantity, length, and orientation

    Article • Ocean Engineering, December 2023, Elsevier

    Distinguished Professor Goodarz Ahmadi

  15. Synthesis of mono, bi, and trimetallic Sn–Ni–Cu based ionic micro-emulsion catalysts and optimization of catalytic performance in heavy oil upgrading

    Article • Energy, December 2023, Elsevier

    Distinguished Professor Goodarz Ahmadi

  16. Exergoeconomic evaluation of an organic Rankine cycle integrated with a compression refrigeration to select the best working fluid for waste heat recovery application: a case study of Isfahan, Iran

    Article • Journal of Thermal Analysis and Calorimetry, September 2023, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  17. Geometry optimization of axial cyclone for high performance and low acoustic noise

    Article • Powder Technology, September 2023, Elsevier

    Distinguished Professor Goodarz Ahmadi

  18. Influence of two-dimensional expiratory airflow variations on respiratory particle propagation during pronunciation of the fricative [f]

    Article • Journal of Aerosol Science, September 2023, Elsevier

    Distinguished Professor Goodarz Ahmadi

  19. DEM simulation of impact charge on polymer particles by single and repeated impact on different metal plates

    Article • Particulate Science And Technology, June 2023, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  20. Airborne respiratory aerosol transport and deposition in a two-person office using a novel diffusion-based numerical model

    Article • Journal of Exposure Science & Environmental Epidemiology, June 2023, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  21. Effect of sneeze flow velocity profiles on the respiratory droplets dispersion in a confined space: An experimental and computational fluid dynamics study

    Article • Physics of Fluids, June 2023, American Institute of Physics

    alireza bahramian, Distinguished Professor Goodarz Ahmadi

  22. Performance analysis of a gas cyclone with a dustbin inverted hybrid solid cone

    Article • Aerosol Science and Technology, June 2023, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  23. The effect of the mucus layer and the inhaled air conditions on the droplets fate in the human nasal cavity: A numerical study

    Article • Journal of Aerosol Science, June 2023, Elsevier

    Distinguished Professor Goodarz Ahmadi

  24. Numerical simulation of charge generation and saturation for polymer particles by single impact on a metal plate

    Article • Particulate Science And Technology, May 2023, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  25. A hybrid deep learning - CFD approach for modeling nanoparticles’ sedimentation processes for possible application in clean energy systems

    Article • Journal of Cleaner Production, May 2023, Elsevier

    Distinguished Professor Goodarz Ahmadi

  26. Performance analysis of a gas cyclone with a converging-diverging vortex finder

    Article • Chemical Engineering Research and Design, May 2023, Elsevier

    Distinguished Professor Goodarz Ahmadi

  27. Kinetic modeling and experimental investigation of composition variation in hydrocarbon upgrading: Application to microwave-assisted reactors

    Article • Journal of the Taiwan Institute of Chemical Engineers, March 2023, Elsevier

    Distinguished Professor Goodarz Ahmadi

  28. Selecting the Safe Area and Finding Proper Ventilation in the Spread of the COVID-19 Virus

    Article • Energies, February 2023, MDPI AG

    Distinguished Professor Goodarz Ahmadi

  29. Parametric study of an H-section oscillatory wind energy converter

    Article • Ocean Engineering, February 2023, Elsevier

    Distinguished Professor Goodarz Ahmadi

  30. Particle dispersion and deposition in wall-bounded turbulent flow

    Article • International Journal of Multiphase Flow, January 2023, Elsevier

    Distinguished Professor Goodarz Ahmadi

  31. Ultrasonic Vibration Technology to Improve the Thermal Performance of CPU Water-Cooling Systems: Experimental Investigation

    Article • Water, December 2022, MDPI AG

    Distinguished Professor Goodarz Ahmadi

  32. Efficient Heat Transfer Augmentation in Channels with Semicircle Ribs and Hybrid Al2O3-Cu/Water Nanofluids

    Article • Nanomaterials, August 2022, MDPI AG

    Dr. Jasim M. Mahdi, Distinguished Professor Goodarz Ahmadi

  33. Computational Heat Transfer and Fluid Mechanics

    Article • July 2022, MDPI AG

    Distinguished Professor Goodarz Ahmadi

  34. Computational modeling of woodstove pollutants in dilution tunnels

    Article • Journal of the Air & Waste Management Association, July 2022, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  35. Effect of Gaussian size distribution width on minimum fluidization velocity in tapered gas–solid fluidized beds

    Article • Particuology, July 2022, Elsevier

    Distinguished Professor Goodarz Ahmadi

  36. Deep convolutional generative adversarial networks for the generation of numerous artificial spectrum‐compatible earthquake accelerograms using a limited number of ground motion records

    Article • Computer-Aided Civil and Infrastructure Engineering, May 2022, Wiley

    Distinguished Professor Goodarz Ahmadi

  37. Computational simulation of water removal from a flat plate, using surface acoustic waves

    Article • Wave Motion, May 2022, Elsevier

    Distinguished Professor Goodarz Ahmadi

  38. On the variation of fricative airflow dynamics with vocal tract geometry and speech loudness

    Article • Aerosol Science and Technology, April 2022, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  39. Microfiber transport characterization in human nasal cavity – Effect of fiber length

    Article • Journal of Aerosol Science, February 2022, Elsevier

    Distinguished Professor Goodarz Ahmadi

  40. Robust and General Model to Forecast the Heat Transfer Coefficient for Flow Condensation in Multi Port Mini/Micro-Channels

    Article • Processes, January 2022, MDPI AG

    Distinguished Professor Goodarz Ahmadi

  41. Techno-economic Analysis of Wind Turbines Powering Rural of Malaysia

    Article • International Journal of Renewable Energy Development, January 2022, Center of Biomass and Renewable Energy (CBIORE)

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi, Distinguished Professor Goodarz Ahmadi

  42. Computational Modeling of Aerosol Transmission of COVID-19

    Article • January 2022, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  43. In-silico investigation of airflow and micro-particle deposition in human nasal airway pre- and post-virtual transnasal sphenoidotomy surgery

    Article • Computer Methods in Biomechanics & Biomedical Engineering, December 2021, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  44. Variability in expiratory trajectory angles during consonant production by one human subject and from a physical mouth model: Application to respiratory droplet emission

    Article • Indoor Air, July 2021, Hindawi Publishing Corporation

    Distinguished Professor Goodarz Ahmadi

  45. Numerical analysis of the mirco-particles distribution inside an underground subway system due to train piston effect

    Article • Journal of Wind Engineering and Industrial Aerodynamics, April 2021, Elsevier

    Distinguished Professor Goodarz Ahmadi

  46. Simulation of a Fast-Charging Porous Thermal Energy Storage System Saturated with a Nano-Enhanced Phase Change Material

    Article • Energies, March 2021, MDPI AG

    Distinguished Professor Goodarz Ahmadi

  47. Modeling and analysis of a fully passive swinging sail wind turbine

    Article • Wind Energy, February 2021, Wiley

    Distinguished Professor Goodarz Ahmadi

  48. A state-of-knowledge review on the endurance time method

    Article • Structures, October 2020, Elsevier

    Distinguished Professor Goodarz Ahmadi

  49. Investigation of airflow at different activity conditions in a realistic model of human upper respiratory tract

    Article • Computer Methods in Biomechanics & Biomedical Engineering, September 2020, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  50. Evaluation of different numerical models for prediction of pressure drop in laminar nanofluid flows

    Article • Energy Sources Part A Recovery Utilization and Environmental Effects, August 2020, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  51. NARMAX Identification Based Closed-Loop Control of Flow Separation over NACA 0015 Airfoil

    Article • Fluids, June 2020, MDPI AG

    Distinguished Professor Goodarz Ahmadi

  52. An ensemble model to predict the minimum spouting velocity for two types of spouted beds

    Article • Particulate Science And Technology, June 2020, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  53. A Model for Particle Removal from Surfaces with Large-scale Roughness in Turbulent Flows

    Article • Aerosol Science and Technology, November 2019, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  54. 3-D numerical analysis of train-induced flow inside four ventilated underground subway stations and connecting tunnels

    Article • Journal of Wind Engineering and Industrial Aerodynamics, October 2019, Elsevier

    Distinguished Professor Goodarz Ahmadi

  55. Overview of mechanistic particle resuspension models: comparison with compilation of experimental data

    Article • Journal of Adhesion Science and Technology, September 2019, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi, Babak Nasr

  56. Investigation of Hydrodynamically Dominated Membrane Rupture, Using Smoothed Particle Hydrodynamics–Finite Element Method

    Article • Fluids, August 2019, MDPI AG

    Distinguished Professor Goodarz Ahmadi

  57. Particles dispersion and deposition in inhomogeneous turbulent flows using continuous random walk models

    Article • Physics of Fluids, August 2019, American Institute of Physics

    Distinguished Professor Goodarz Ahmadi, amir mofakham

  58. Numerical Simulations of Turbulent Flow Through a 90° Elbow

    Article • July 2019, ASME International

    Distinguished Professor Goodarz Ahmadi

  59. Energy and exergy analysis of intensified condensate stabilization unit with water draw pan

    Article • Applied Thermal Engineering, June 2019, Elsevier

    Distinguished Professor Goodarz Ahmadi

  60. Nano-particle deposition in axisymmetric annular pipes with thread

    Article • Particulate Science And Technology, May 2019, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi, Kiao Inthavong, Pouyan Talebizadehsardari

  61. A numerical study of the train-induced unsteady airflow in a tunnel and its effects on the performance of jet fans

    Article • Journal of Wind Engineering and Industrial Aerodynamics, April 2019, Elsevier

    Distinguished Professor Goodarz Ahmadi

  62. An evolutionary optimization-based approach for simulation of endurance time load functions

    Article • Engineering Optimization, February 2019, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  63. Prediction of frost layer over flat plates under natural and forced convection conditions using intelligent and least-square fitting approaches

    Article • Applied Thermal Engineering, February 2019, Elsevier

    Distinguished Professor Goodarz Ahmadi

  64. Direct numerical simulation of freely falling particles by hybrid immersed boundary – Lattice Boltzmann – discrete element method

    Article • Particulate Science And Technology, January 2019, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  65. A Model for Fuel Spray Formation with Atomizing Air

    Article • Fluids, January 2019, MDPI AG

    Distinguished Professor Goodarz Ahmadi

  66. Enhancing drug delivery to human trachea through oral airway using magnetophoretic steering of microsphere carriers composed of aggregated superparamagnetic nanoparticles and nanomedicine: A numerical study

    Article • Journal of Aerosol Science, January 2019, Elsevier

    Distinguished Professor Goodarz Ahmadi

  67. Issues in Eulerian–Lagrangian modeling of sediment transport under saltation regime

    Article • International Journal of Sediment Research, December 2018, Elsevier

    Distinguished Professor Goodarz Ahmadi

  68. Nano-particle deposition in the presence of electric field

    Article • Journal of Aerosol Science, December 2018, Elsevier

    Distinguished Professor Goodarz Ahmadi

  69. Multilevel Algorithm for Obtaining the Proper Orthogonal Decomposition

    Article • AIAA Journal, November 2018, American Institute of Aeronautics and Astronautics (AIAA)

    Distinguished Professor Goodarz Ahmadi, Brian Helenbrook

  70. CFD modeling of turbulent convection heat transfer of nanofluids containing green functionalized graphene nanoplatelets flowing in a horizontal tube: Comparison with experimental data

    Article • Journal of Molecular Liquids, November 2018, Elsevier

    Distinguished Professor Goodarz Ahmadi

  71. A numerical study of electric force effects on detachment and deposition of particles due to a falling disk

    Article • Journal of Aerosol Science, October 2018, Elsevier

    Distinguished Professor Goodarz Ahmadi

  72. Numerical investigation of effects of inner cone on flow field, performance and erosion rate of cyclone separators

    Article • Separation and Purification Technology, August 2018, Elsevier

    Distinguished Professor Goodarz Ahmadi

  73. Numerical study of fluid flow and particle dispersion and deposition around two inline buildings

    Article • Journal of Wind Engineering and Industrial Aerodynamics, August 2018, Elsevier

    Distinguished Professor Goodarz Ahmadi

  74. An immersed boundary-lattice Boltzmann method combined with a robust lattice spring model for solving flow–structure interaction problems

    Article • Applied Mathematical Modelling, March 2018, Elsevier

    Distinguished Professor Goodarz Ahmadi

  75. Flame propagation through heterogeneous combustion of hybrid aluminum-boron poly-disperse particle suspensions in air

    Article • Fuel, March 2018, Elsevier

    Distinguished Professor Goodarz Ahmadi

  76. Laminar flow drag reduction on soft porous media

    Article • Scientific Reports, December 2017, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  77. Impacts of the vortex finder eccentricity on the flow pattern and performance of a gas cyclone

    Article • Separation and Purification Technology, October 2017, Elsevier

    Distinguished Professor Goodarz Ahmadi

  78. Intermolecular interactions and its effect within Cr 3+ -containing atmospheric particulate matter using molecular dynamics simulations

    Article • Atmospheric Environment, October 2017, Elsevier

    Distinguished Professor Goodarz Ahmadi

  79. CFD simulation of reactor furnace of sulfur recovery units by considering kinetics of acid gas (H 2 S and CO 2 ) destruction

    Article • Applied Thermal Engineering, August 2017, Elsevier

    Distinguished Professor Goodarz Ahmadi

  80. Effect of turbulent thermal plume on aspiration efficiency of micro-particles

    Article • Building and Environment, June 2017, Elsevier

    Distinguished Professor Goodarz Ahmadi

  81. Two-phase flow and droplet behavior in microchannels of PEM fuel cell

    Article • International Journal of Hydrogen Energy, November 2016, Elsevier

    Distinguished Professor Goodarz Ahmadi

  82. Computational fluid dynamics (CFD) simulation of a newly designed passive particle sampler

    Article • Environmental Pollution, July 2016, Elsevier

    Distinguished Professor Goodarz Ahmadi

  83. Heat Transfer and Pressure Drop in Fully Developed Turbulent Flows of Graphene Nanoplatelets–Silver/Water Nanofluids

    Article • Fluids, June 2016, MDPI AG

    Dr. Mohammad Reza Safaei, Distinguished Professor Goodarz Ahmadi

  84. Electrostatic force distribution on an electrodynamic screen

    Article • Journal of Electrostatics, June 2016, Elsevier

    Distinguished Professor Goodarz Ahmadi

  85. Simulations of indoor airflow and particle dispersion and deposition by the lattice Boltzmann method using LES and RANS approaches

    Article • Building and Environment, June 2016, Elsevier

    Distinguished Professor Goodarz Ahmadi

  86. Computational simulation of temperature and velocity distribution in human upper respiratory airway during inhalation of hot air

    Article • Respiratory Physiology & Neurobiology, March 2016, Elsevier

    Distinguished Professor Goodarz Ahmadi

  87. Effect of Brownian Dynamics on Ellipsoidal Fibers in Human Tracheobronchial Airways

    Article • July 2015, ASME International

    Distinguished Professor Goodarz Ahmadi

  88. Mechanics of Particle Adhesion and Removal

    Article • February 2015, Wiley

    Distinguished Professor Goodarz Ahmadi

  89. Aeroelastic System Control by a Multiple Spoiler Actuation and MRAC Scheme

    Article • January 2015, American Institute of Aeronautics and Astronautics (AIAA)

    Distinguished Professor Goodarz Ahmadi

  90. Foreword

    Article • January 2014, Elsevier

    Distinguished Professor Goodarz Ahmadi

  91. Monte Carlo simulation of micron size spherical particle removal and resuspension from substrate under fluid flows

    Article • Journal of Aerosol Science, December 2013, Elsevier

    Distinguished Professor Goodarz Ahmadi

  92. Investigation of fine droplet generation from hot engine oil by impinging gas jets onto liquid surface

    Article • Journal of Aerosol Science, November 2013, Elsevier

    Distinguished Professor Goodarz Ahmadi

  93. A model for particles deposition in turbulent inclined channels

    Article • Journal of Aerosol Science, October 2013, Elsevier

    Distinguished Professor Goodarz Ahmadi

  94. Blood flow vectoring control in aortic arch using full and partial clamps

    Article • Computers in Biology and Medicine, September 2013, Elsevier

    Distinguished Professor Goodarz Ahmadi

  95. CFD simulation of cylindrical spouted beds by the kinetic theory of granular flow

    Article • Powder Technology, September 2013, Elsevier

    Distinguished Professor Goodarz Ahmadi

  96. Numerical analysis of flow field around NREL Phase II wind turbine by a hybrid CFD/BEM method

    Article • Journal of Wind Engineering and Industrial Aerodynamics, September 2013, Elsevier

    Distinguished Professor Goodarz Ahmadi

  97. Numerical study of heat transfer performance of single-phase heat sinks with micro pin-fin structures

    Article • Applied Thermal Engineering, September 2013, Elsevier

    Distinguished Professor Goodarz Ahmadi

  98. Effect of slip boundary conditions on the simulation of microparticle velocity fields in a conical fluidized bed

    Article • AIChE Journal, August 2013, Wiley

    Distinguished Professor Goodarz Ahmadi

  99. Wind tunnel study and numerical simulation of dust particle resuspension from indoor surfaces in turbulent flows

    Article • Journal of Adhesion Science and Technology, July 2013, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  100. Fiber transport and deposition in human upper tracheobronchial airways

    Article • Journal of Aerosol Science, June 2013, Elsevier

    Distinguished Professor Goodarz Ahmadi

  101. On the Induced Airflow and Particle Resuspension Due to a Falling Disk

    Article • Particulate Science And Technology, March 2013, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  102. CFD study of hydrodynamics behavior of a vibrating fluidized bed using kinetic-frictional stress model of granular flow

    Article • Korean Journal of Chemical Engineering, February 2013, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  103. Numerical Study of Entropy Generation in a Flowing Nanofluid Used in Micro- and Minichannels

    Article • Entropy, January 2013, MDPI AG

    Distinguished Professor Goodarz Ahmadi

  104. Deployment Dynamics of a Rolled Micro Air Vehicle Wing

    Article • Journal of Aircraft, January 2013, American Institute of Aeronautics and Astronautics (AIAA)

    Distinguished Professor Goodarz Ahmadi

  105. Distribution of Nanoparticles near a Major U.S. and Canada Trade Bridge: Comparison of Simulations with Field Data

    Article • Aerosol and Air Quality Research, January 2013, Taiwan Association for Aerosol Research

    Distinguished Professor Goodarz Ahmadi

  106. Simulation of a mannequin’s thermal plume in a small room

    Article • Computers & Mathematics with Applications, January 2013, Elsevier

    Distinguished Professor Goodarz Ahmadi

  107. The Effect of Electrode Parameters on Lead-Acid Battery Performance

    Article • Advanced Materials Research, January 2013, Trans Tech Publications

    Distinguished Professor Goodarz Ahmadi

  108. Simulation of Solid Particles Behavior in a Heated Cavity at High Rayleigh Numbers

    Article • Aerosol Science and Technology, December 2012, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  109. Computational modeling of effects of thermal plume adjacent to the body on the indoor airflow and particle transport

    Article • Journal of Aerosol Science, November 2012, Elsevier

    Distinguished Professor Goodarz Ahmadi

  110. Boundary Shear Stress in a Trapezoidal Channel

    Article • International Journal of Engineering, October 2012, International Digital Organization for Scientific Information (IDOSI)

    Distinguished Professor Goodarz Ahmadi

  111. Numerical evaluation of turbulence models for dense to dilute gas–solid flows in vertical conveyor

    Article • Particuology, October 2012, Elsevier

    Distinguished Professor Goodarz Ahmadi

  112. A Model for Removal of Compact, Rough, Irregularly Shaped Particles from Surfaces in Turbulent Flows

    Article • The Journal of Adhesion, September 2012, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  113. A Numerical Investigation of Regional Fiber Deposition in a Realistic Nasal Cavity

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  114. CFD Simulation of Particle Transport and Dispersion in Indoor Environment by Human Walking

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  115. CFD Study of Particle Deposition in Flows in Inclined Ducts

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  116. Closed-Loop Feedback Control of Flow Over a Flapped Airfoil at High Angles of Attack Using Identified NARMAX Model

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  117. Overview of Particle Transport and Deposition in Environmental and Industrial Applications

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  118. Micro/Nano-Particle Deposition in the Airway of a 6-Year-Old Child From Nostril to the Third Generation

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  119. Modeling Wind Flow and Particulate Pollutant Dispersion Around a Realistic Model of a Building Using Large-Eddy Simulation

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  120. Monte Carlo Simulations of Micro-Particle Detachment and Resuspension From Surfaces in Turbulent Flows

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  121. Numerical Investigation of Liquids Mixing in Pin-Finned Microchannels

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  122. On Reduced Order Modeling of Transient Flows Using the Proper Orthogonal Decomposition

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  123. Population Balance Modeling for Non-Homogeneous Bubble Column: Effect of Fluid Rheology on Gas Dispersion

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  124. Roles of Neutrally Buoyant Particles in Gas-Liquid-Solid Flows

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  125. Simulation of Gas – Non-Newtonian Liquid Flow in a Rectangular Bubble Column by Considering Bubbles Interactions

    Article • July 2012, ASME International

    Distinguished Professor Goodarz Ahmadi

  126. Computational fluid dynamics studies of dry and wet pressure drops in structured packings

    Article • Journal of Industrial and Engineering Chemistry, July 2012, Elsevier

    Distinguished Professor Goodarz Ahmadi

  127. Permeability of Fractured Media under Confining Pressure: A Simplified Model

    Article • The Open Petroleum Engineering Journal, June 2012, Bentham Science Publishers

    Distinguished Professor Goodarz Ahmadi

  128. Transport and Deposition of Micro-and Nano-Particles in Human Tracheobronchial Tree by an Asymmetric Multi-Level Bifurcation Model

    Article • The Journal of Computational Multiphase Flows, June 2012, SAGE Publications

    Distinguished Professor Goodarz Ahmadi

  129. Saccade movements effect on the intravitreal drug delivery in vitreous substitutes: a numerical study

    Article • Biomechanics and Modeling in Mechanobiology, May 2012, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  130. Experimental study on the effect of connecting ducts on demisting cyclone efficiency

    Article • Experimental Thermal and Fluid Science, May 2012, Elsevier

    Distinguished Professor Goodarz Ahmadi

  131. Micro and nanoparticle deposition in human nasal passage pre and post virtual maxillary sinus endoscopic surgery

    Article • Respiratory Physiology & Neurobiology, May 2012, Elsevier

    Distinguished Professor Goodarz Ahmadi

  132. Computer simulations of natural convection of single phase nanofluids in simple enclosures: A critical review

    Article • Applied Thermal Engineering, April 2012, Elsevier

    Distinguished Professor Goodarz Ahmadi

  133. Numerical Simulations of Liquid-Gas-Solid Three-Phase Flows in Microgravity

    Article • The Journal of Computational Multiphase Flows, March 2012, SAGE Publications

    Distinguished Professor Goodarz Ahmadi

  134. Transport and deposition of ellipsoidal fibers in low Reynolds number flows

    Article • Journal of Aerosol Science, March 2012, Elsevier

    Distinguished Professor Goodarz Ahmadi

  135. Thermoelastic damping in a micro-beam resonator tunable with piezoelectric layers

    Article • Acta Mechanica Solida Sinica, February 2012, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  136. Computational Fluid Dynamics of Particle Transport and Deposition

    Article • January 2012, Elsevier

    Distinguished Professor Goodarz Ahmadi

  137. Contributors

    Article • January 2012, Elsevier

    Distinguished Professor Goodarz Ahmadi

  138. Transport and Deposition of Evaporating Droplets in a Ventilated Environment

    Article • Particulate Science And Technology, January 2012, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  139. Study of Heat Transfer and Hydrodynamics in a Gas-Solid Fluidized Bed Reactor Experimentally and Numerically

    Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

    Distinguished Professor Goodarz Ahmadi

  140. Two-Phase Study of Fluid Flow and Heat Transfer in Gas-Solid Flows (Nanofluids)

    Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

    Distinguished Professor Goodarz Ahmadi

  141. Experimental In-Flight Rolling MAV Wing Deployment and Aerodynamic Characterization

    Article • SAE International Journal of Aerospace, October 2011, SAE International

    Distinguished Professor Goodarz Ahmadi

  142. On the dynamic response of a half-space subjected to a moving mass

    Article • Mathematics and Mechanics of Solids, September 2011, SAGE Publications

    Distinguished Professor Goodarz Ahmadi

  143. On the stability of a microbeam conveying fluid considering modified couple stress theory

    Article • International Journal of Mechanics and Materials in Design, September 2011, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  144. CFD Studies of Pressure Drop and Increasing Capacity in MellapakPlus 752.Y Structured Packing

    Article • Chemical Engineering & Technology, August 2011, Wiley

    Distinguished Professor Goodarz Ahmadi

  145. Prediction of the Effective Area in Structured Packings by Computational Fluid Dynamics

    Article • Industrial & Engineering Chemistry Research, August 2011, American Chemical Society (ACS)

    Distinguished Professor Goodarz Ahmadi

  146. Simulation of flow field during irrigation/aspiration in phacoemulsification using computational fluid dynamics

    Article • Journal of Cataract & Refractive Surgery, August 2011, Wolters Kluwer Health

    Distinguished Professor Goodarz Ahmadi

  147. Turbulence modulation for gas – particle flow in vertical tube and horizontal channel using four-way Eulerian–Lagrangian approach

    Article • International Journal of Heat and Fluid Flow, August 2011, Elsevier

    Distinguished Professor Goodarz Ahmadi

  148. Crack Propagation in Prestressed Concrete Noncylinder Pipe Using Finite Element Method

    Article • July 2011, American Society of Civil Engineers (ASCE)

    Distinguished Professor Goodarz Ahmadi

  149. Damage Identification Based on Modal Analysis of Prestressed Concrete Pipes

    Article • July 2011, American Society of Civil Engineers (ASCE)

    Distinguished Professor Goodarz Ahmadi

  150. Two-phase flow in a rough fracture: Experiment and modeling

    Article • Physical Review E, July 2011, American Physical Society (APS)

    Distinguished Professor Goodarz Ahmadi

  151. A Numerical Model for Simulating the Motions of Ellipsoidal Fibers Suspended in Low Reynolds Number Shear Flows

    Article • Aerosol Science and Technology, July 2011, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  152. Numerical investigation of septal deviation effect on deposition of nano/microparticles in human nasal passage

    Article • Respiratory Physiology & Neurobiology, June 2011, Elsevier

    Distinguished Professor Goodarz Ahmadi

  153. The Effect of Rate Limited Actuator Dynamics on the Adaptive Control of a Nonlinear Aeroservoelastic (ASE) System

    Article • April 2011, American Institute of Aeronautics and Astronautics (AIAA)

    Distinguished Professor Goodarz Ahmadi

  154. CFD Modeling and Simulation of Hydrodynamics in a Fluidized Bed Chamber with Experimental Validation

    Article • January 2011, ACTA Press

    Distinguished Professor Goodarz Ahmadi

  155. Effects of Electrostatic and Capillary Forces and Surface Deformation on Particle Detachment in Turbulent Flows

    Article • Journal of Adhesion Science and Technology, January 2011, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  156. Computational Fluid Dynamic Simulation of Hydrodynamic Behavior in a Two-Dimensional Conical Spouted Bed

    Article • Energy & Fuels, November 2010, American Chemical Society (ACS)

    Distinguished Professor Goodarz Ahmadi

  157. CFD modeling of a spouted bed with a porous draft tube

    Article • Particuology, October 2010, Elsevier

    Distinguished Professor Goodarz Ahmadi

  158. Numerical simulations of airflow and droplet transport in a wave-plate mist eliminator

    Article • Chemical Engineering Research and Design, October 2010, Elsevier

    Distinguished Professor Goodarz Ahmadi

  159. Damage Identification Based on Vibration Response of Prestressed Concrete Pipes

    Article • August 2010, American Society of Civil Engineers (ASCE)

    Distinguished Professor Goodarz Ahmadi

  160. Numerical investigation of the jet formation through the oscillation of a bubble between a couple of parallel walls

    Article • August 2010, WITPRESS LTD.

    Distinguished Professor Goodarz Ahmadi

  161. An analytical study on settling of non-spherical particles

    Article • Asia-Pacific Journal of Chemical Engineering, August 2010, Wiley

    Distinguished Professor Goodarz Ahmadi

  162. Effect of Sub-Grid Scales on Large Eddy Simulation of Particle Deposition in a Turbulent Channel Flow

    Article • Aerosol Science and Technology, August 2010, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  163. A new effective thermal conductivity model for a bio-nanofluid (blood with nanoparticle Al2O3)

    Article • International Communications in Heat and Mass Transfer, August 2010, Elsevier

    Distinguished Professor Goodarz Ahmadi

  164. Controlling Chaotic Motions of a Nonlinear Aeroelastic System Using Adaptive Control Augmented with Time Delay

    Article • June 2010, American Institute of Aeronautics and Astronautics (AIAA)

    Distinguished Professor Goodarz Ahmadi

  165. CFD studies of solids hold-up distribution and circulation patterns in gas–solid fluidized beds

    Article • Powder Technology, June 2010, Elsevier

    Distinguished Professor Goodarz Ahmadi

  166. Erratum to “A novel surface-slip correction for microparticles motion” [Colloids Surf. A: Physicochem. Eng. Aspects 345 (2009) 112–120]

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, June 2010, Elsevier

    Distinguished Professor Goodarz Ahmadi

  167. Analytical investigation on acceleration motion of a vertically falling spherical particle in incompressible Newtonian media

    Article • Advanced Powder Technology, May 2010, Elsevier

    Distinguished Professor Goodarz Ahmadi

  168. A new expression for spherical aerosol drag in slip flow regime

    Article • Journal of Aerosol Science, April 2010, Elsevier

    Distinguished Professor Goodarz Ahmadi

  169. Numerical Simulation of Particle Segregation in Bubbling Gas-Fluidized Beds

    Article • Chemical Engineering & Technology, March 2010, Wiley

    Distinguished Professor Goodarz Ahmadi

  170. Investigation of particle dispersion and deposition in a channel with a square cylinder obstruction using the lattice Boltzmann method

    Article • Journal of Aerosol Science, February 2010, Elsevier

    Distinguished Professor Goodarz Ahmadi

  171. Thermal stochastic collision model in turbulent gas–solid pipe flows

    Article • International Journal of Heat and Mass Transfer, February 2010, Elsevier

    Distinguished Professor Goodarz Ahmadi

  172. Computational Modeling of Fluid Flow through a Fracture in Permeable Rock

    Article • Transport in Porous Media, January 2010, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  173. Computational and Experimental Study of Heat Transfer and Hydrodynamics in a 2D Gas−Solid Fluidized Bed Reactor

    Article • Industrial & Engineering Chemistry Research, January 2010, American Chemical Society (ACS)

    Distinguished Professor Goodarz Ahmadi

  174. A Search Algorithm for Particle Laden Flows: Application to Nanofluids

    Article • January 2010, ASME International

    Distinguished Professor Goodarz Ahmadi

  175. Microchannel heat transfer and dispersion of nanoparticles in slip flow regime with constant heat flux

    Article • International Communications in Heat and Mass Transfer, December 2009, Elsevier

    Distinguished Professor Goodarz Ahmadi

  176. A DNS study of effects of particle–particle collisions and two-way coupling on particle deposition and phasic fluctuations

    Article • Journal of Fluid Mechanics, November 2009, Cambridge University Press

    Distinguished Professor Goodarz Ahmadi

  177. Design and Experimental Investigation of a Small UAV

    Article • November 2009, SAE International

    Distinguished Professor Goodarz Ahmadi

  178. Micro-Raman scattering of KTP (KTiOPO4) nanocrystallites synthesized by modified sol–gel Pechini method

    Article • Vibrational Spectroscopy, November 2009, Elsevier

    Distinguished Professor Goodarz Ahmadi

  179. A novel surface-slip correction for microparticles motion

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, August 2009, Elsevier

    Distinguished Professor Goodarz Ahmadi

  180. Flow Analysis of Non-Newtonian Blood in a Magnetohydrodynamic Pump

    Article • IEEE Transactions on Magnetics, June 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Distinguished Professor Goodarz Ahmadi

  181. Numerical simulation of electrolyte particles trajectory to investigate battery cover design characteristics

    Article • Journal of Power Sources, June 2009, Elsevier

    Distinguished Professor Goodarz Ahmadi

  182. Distribution and occurrence of localized-bursts in two-phase flow through porous media

    Article • Physica A Statistical Mechanics and its Applications, March 2009, Elsevier

    Distinguished Professor Goodarz Ahmadi

  183. Three-Dimensional Simulation of Brownian Motion of Nano-Particles In Aerodynamic Lenses

    Article • Aerosol Science and Technology, February 2009, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  184. Computational Modelling of Gas-Particle Flows with Different Particle Morphology in the Human Nasal Cavity

    Article • The Journal of Computational Multiphase Flows, January 2009, SAGE Publications

    Distinguished Professor Goodarz Ahmadi

  185. Computational modeling of nano-structured glass fibers

    Article • Computational Materials Science, December 2008, Elsevier

    Distinguished Professor Goodarz Ahmadi

  186. Fibrous particle deposition in human nasal passage: The influence of particle length, flow rate, and geometry of nasal airway

    Article • Journal of Aerosol Science, December 2008, Elsevier

    Distinguished Professor Goodarz Ahmadi

  187. Numerical Simulation of Particle Saltation Process

    Article • Particulate Science And Technology, December 2008, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  188. Effects of Inlet Position and Baffle Configuration on Hydraulic Performance of Primary Settling Tanks

    Article • Journal of Hydraulic Engineering, July 2008, American Society of Civil Engineers (ASCE)

    Distinguished Professor Goodarz Ahmadi

  189. Sensitivity of Flow and Sediment Transport in Meandering Rivers to Scale Effects and Flow Rate

    Article • Environmental Engineering Science, June 2008, Mary Ann Liebert Inc

    Distinguished Professor Goodarz Ahmadi

  190. A new stereolithography experimental porous flow device

    Article • Review of Scientific Instruments, April 2008, American Institute of Physics

    Distinguished Professor Goodarz Ahmadi

  191. Nonlocal Continuum Theory Based Modeling of Carbon Nanotube Composites

    Article • January 2008, ASME International

    Distinguished Professor Goodarz Ahmadi

  192. Transport, Deposition and Removal of Fine Particles - Biomedical Applications

    Article • January 2008, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  193. Numerical Simulations Investigating the Regional and Overall Deposition Efficiency of the Human Nasal Cavity

    Article • Inhalation Toxicology, January 2008, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  194. Particle Detachment, Resuspension and Transport Due to Human Walking in Indoor Environments

    Article • Journal of Adhesion Science and Technology, January 2008, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  195. Temperature Distribution in a Demonstration-Scale Filter Vessel With and Without Ash Bridging

    Article • Advanced Powder Technology, January 2008, Elsevier

    Distinguished Professor Goodarz Ahmadi

  196. The effect of two-way coupling and inter-particle collisions on turbulence modulation in a vertical channel flow

    Article • International Journal of Heat and Fluid Flow, December 2007, Elsevier

    Distinguished Professor Goodarz Ahmadi

  197. Computational modeling of methane hydrate dissociation in a sandstone core

    Article • Chemical Engineering Science, November 2007, Elsevier

    Distinguished Professor Goodarz Ahmadi

  198. Computational investigation of airflow, shock wave and nano-particle separation in supersonic and hypersonic impactors

    Article • Journal of Aerosol Science, October 2007, Elsevier

    Distinguished Professor Goodarz Ahmadi

  199. Effects of corotron size and parameters on the dielectric substrate surface charge

    Article • Journal of Electrostatics, October 2007, Elsevier

    Distinguished Professor Goodarz Ahmadi

  200. Particle Transport and Deposition in a Duct Flow with a Rectangular Obstruction

    Article • Particulate Science And Technology, September 2007, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  201. Natural gas production from hydrate dissociation: An axisymmetric model

    Article • Journal of Petroleum Science and Engineering, August 2007, Elsevier

    Distinguished Professor Goodarz Ahmadi

  202. Production of natural gas from methane hydrate by a constant downhole pressure well

    Article • Energy Conversion and Management, July 2007, Elsevier

    Distinguished Professor Goodarz Ahmadi

  203. LATTICE BOLTZMANN SIMULATIONS OF CONTACT LINE PINNING

    Article • International Journal of Modern Physics C, April 2007, World Scientific Pub Co Pte Lt

    Distinguished Professor Goodarz Ahmadi

  204. Particle deposition in turbulent duct flows—comparisons of different model predictions

    Article • Journal of Aerosol Science, April 2007, Elsevier

    Distinguished Professor Goodarz Ahmadi

  205. Bumpy Particle Adhesion and Removal in Turbulent Flows Including Electrostatic and Capillary Forces

    Article • The Journal of Adhesion, March 2007, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  206. Particle Adhesion and Detachment in Turbulent Flows Including Capillary Forces

    Article • Particulate Science And Technology, January 2007, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  207. An Axisymmetric Model for Diffusion of Nano-Particles

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Distinguished Professor Goodarz Ahmadi

  208. Effects of capillary force and surface deformation on particle removal in turbulent flows

    Article • Journal of Adhesion Science and Technology, January 2007, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  209. A new friction factor correlation for laminar, single-phase flows through rock fractures

    Article • Journal of Hydrology, September 2006, Elsevier

    Distinguished Professor Goodarz Ahmadi

  210. A thermodynamical formulation for chemically active multiphase turbulent flows

    Article • International Journal of Engineering Science, July 2006, Elsevier

    Distinguished Professor Goodarz Ahmadi

  211. Airflow and Deposition of Nano-Particles in a Human Nasal Cavity

    Article • Aerosol Science and Technology, July 2006, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  212. Variations of Airflow and Electric Fields in a Corona Device During Charging of a Moving Dielectric Substrate

    Article • Journal of Imaging Science and Technology, July 2006, Society for Imaging Science & Technology

    Distinguished Professor Goodarz Ahmadi

  213. Airflow and pollutant transport in street canyons

    Article • Journal of Wind Engineering and Industrial Aerodynamics, June 2006, Elsevier

    Distinguished Professor Goodarz Ahmadi

  214. Transport and deposition of particles near a building model

    Article • Building and Environment, June 2006, Elsevier

    Distinguished Professor Goodarz Ahmadi

  215. 3-D Modelling of Brownian Motion of Nano-Particles in Aerodynamic Lenses

    Article • January 2006, ASME International

    Distinguished Professor Goodarz Ahmadi

  216. Aerosol transport and deposition analysis in a demonstration-scale hot-gas filter vessel with alternate designs

    Article • Advanced Powder Technology, January 2006, Elsevier

    Distinguished Professor Goodarz Ahmadi

  217. Uniformity of the Fluid Flow Velocities Within Hollow Fiber Membranes of Blood Oxygenation Devices

    Article • Artificial Organs, December 2005, Wiley

    Distinguished Professor Goodarz Ahmadi

  218. Computer simulation of flow through a lattice flow-cell model

    Article • Advances in Water Resources, December 2005, Elsevier

    Distinguished Professor Goodarz Ahmadi

  219. Fiber Classification and the Influence of Average Air Humidity

    Article • Aerosol Science and Technology, November 2005, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  220. Inter-particle heat transfer in a riser of gas–solid turbulent flows

    Article • Powder Technology, November 2005, Elsevier

    Distinguished Professor Goodarz Ahmadi

  221. Eulerian–Lagrangian simulations of liquid–gas–solid flows in three-phase slurry reactors

    Article • Chemical Engineering Science, September 2005, Elsevier

    Distinguished Professor Goodarz Ahmadi

  222. Flow Characterization Through a Network Cell Using Particle Image Velocimetry

    Article • Transport in Porous Media, August 2005, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  223. Computer Simulation of Pollutant Transport and Deposition Near Peace Bridge

    Article • Particulate Science And Technology, April 2005, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  224. A model for supersonic and hypersonic impactors for nanoparticles

    Article • Journal of Nanoparticle Research, February 2005, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  225. Removal of Particle Pairs from a Plane Surface

    Article • The Journal of Adhesion, February 2005, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  226. Computational Simulation of Supersonic Flow Using Reynolds Stress Model

    Article • January 2005, ASME International

    Distinguished Professor Goodarz Ahmadi

  227. Three-Phase Liquid-Gas-Solid Flows in a Bubble Column

    Article • January 2005, ASME International

    Distinguished Professor Goodarz Ahmadi

  228. Numerical Modeling of Upstream Nozzle Effect in Supersonic/Hypersonic Impactors for Nano-Particles

    Article • January 2005, ASME International

    Distinguished Professor Goodarz Ahmadi

  229. Mathematical Simulation of Flexible Fiber Dispersion in a Homogenous Turbulent Flow

    Article • JSME International Journal Series B, January 2005, Japan Society of Mechanical Engineers

    Distinguished Professor Goodarz Ahmadi

  230. Modeling the Effects of Abrasive Size Distribution, Adhesion, and Surface Plastic Deformation on Chemical-Mechanical Polishing

    Article • Journal of The Electrochemical Society, January 2005, The Electrochemical Society

    Distinguished Professor Goodarz Ahmadi

  231. Coupling effects of the flow and electric fields in electrostatic precipitators

    Article • Journal of Applied Physics, December 2004, American Institute of Physics

    Distinguished Professor Goodarz Ahmadi

  232. Optimal preview active control of structures during earthquakes

    Article • Engineering Structures, August 2004, Elsevier

    Distinguished Professor Goodarz Ahmadi

  233. Stochastic optimal preview control of a vehicle suspension

    Article • Journal of Sound and Vibration, August 2004, Elsevier

    Distinguished Professor Goodarz Ahmadi

  234. Crossover from capillary fingering to viscous fingering for immiscible unstable flow: Experiment and modeling

    Article • Physical Review E, July 2004, American Physical Society (APS)

    Distinguished Professor Goodarz Ahmadi

  235. Experimental study of turbulent gas–solid heat transfer at different particles temperature

    Article • Experimental Thermal and Fluid Science, June 2004, Elsevier

    Distinguished Professor Goodarz Ahmadi

  236. Analytical heat flow modeling of silicon-on-insulator devices

    Article • Solid-State Electronics, March 2004, Elsevier

    Distinguished Professor Goodarz Ahmadi

  237. Steady-state and dynamic thermal models for heat flow analysis of silicon-on-insulator MOSFETs

    Article • Microelectronics Reliability, March 2004, Elsevier

    Distinguished Professor Goodarz Ahmadi

  238. Flow and turbulence conditions in the wake of a H-section in cross flow

    Article • Journal of Fluids and Structures, February 2004, Elsevier

    Distinguished Professor Goodarz Ahmadi

  239. Numerical solution for natural gas production from methane hydrate dissociation

    Article • Journal of Petroleum Science and Engineering, February 2004, Elsevier

    Distinguished Professor Goodarz Ahmadi

  240. AN ENGINEERING MODEL FOR THE FUEL SPRAY FORMATION OF DEFORMING DROPLETS

    Article • Atomization and Sprays, January 2004, Begell House

    Distinguished Professor Goodarz Ahmadi

  241. Modeling of Thermal Behavior in SOI Structures

    Article • IEEE Transactions on Electron Devices, January 2004, Institute of Electrical & Electronics Engineers (IEEE)

    Distinguished Professor Goodarz Ahmadi

  242. Numerical simulations and particle imaging velocimetry measurements of fluid flow through a lattice model

    Article • January 2004, Elsevier

    Distinguished Professor Goodarz Ahmadi

  243. Single-phase and multi-phase fluid flow through an artificially induced, CT-scanned fracture

    Article • January 2004, Elsevier

    Distinguished Professor Goodarz Ahmadi

  244. Constant rate natural gas production from a well in a hydrate reservoir

    Article • Energy Conversion and Management, September 2003, Elsevier

    Distinguished Professor Goodarz Ahmadi

  245. Particle removal mechanisms in cryogenic surface cleaning

    Article • The Journal of Adhesion, February 2003, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  246. Thermal simulation for SOI devices using thermal-circuit models and device simulation

    Article • Solid-State Electronics, February 2003, Elsevier

    Distinguished Professor Goodarz Ahmadi

  247. Gas-Liquid-Particle Three-Phase Flows in Bubble Columns

    Article • January 2003, ASME International

    Distinguished Professor Goodarz Ahmadi

  248. A Model for Multiphase Flows through Poroelastic Media

    Article • Journal of Porous Media, January 2003, Begell House

    Distinguished Professor Goodarz Ahmadi

  249. A Model for Effect of Colloidal Forces on Chemical Mechanical Polishing

    Article • Journal of The Electrochemical Society, January 2003, The Electrochemical Society

    Distinguished Professor Goodarz Ahmadi

  250. Hot-gas flow and particle transport and deposition in a candle filter vessel

    Article • Advanced Powder Technology, January 2003, Elsevier

    Distinguished Professor Goodarz Ahmadi

  251. Gas flow and particle deposition in the hot-gas filter vessel of the Pinon Pine project

    Article • Powder Technology, December 2002, Elsevier

    Distinguished Professor Goodarz Ahmadi

  252. Thermo-mechanical modeling of turbulent heat transfer in gas–solid flows including particle collisions

    Article • International Journal of Heat and Fluid Flow, December 2002, Elsevier

    Distinguished Professor Goodarz Ahmadi

  253. Hydrodynamic modeling of short-channel devices using an upwind flux vector splitting scheme

    Article • Computer Methods in Applied Mechanics and Engineering, November 2002, Elsevier

    Distinguished Professor Goodarz Ahmadi

  254. Seismic isolation of buildings with sliding concave foundation (SCF)

    Article • Earthquake Engineering & Structural Dynamics, October 2002, Wiley

    Distinguished Professor Goodarz Ahmadi

  255. Surface Removal Rate in Chemical-Mechanical Polishing

    Article • Particulate Science And Technology, July 2002, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  256. Analysis of Steady-State Filtration and Backpulse Process in a Hot-Gas Filter Vessel

    Article • Aerosol Science and Technology, June 2002, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  257. Computational modeling of flow and sediment transport and deposition in meandering rivers

    Article • Advances in Water Resources, June 2002, Elsevier

    Distinguished Professor Goodarz Ahmadi

  258. Modeling of heat transfer in turbulent gas–solid flow

    Article • International Journal of Heat and Mass Transfer, March 2002, Elsevier

    Distinguished Professor Goodarz Ahmadi

  259. An Experimental Study on the Seismic Response of Base-Isolated Secondary Systems

    Article • Journal of Pressure Vessel Technology, January 2002, ASME International

    Professor Mohammad Noori, Distinguished Professor Goodarz Ahmadi

  260. Modeling the Effect of Bumpy Abrasive Particles on Chemical Mechanical Polishing

    Article • Journal of The Electrochemical Society, January 2002, The Electrochemical Society

    Distinguished Professor Goodarz Ahmadi

  261. Nonisothermal Simulation of Flows in the Hot-Gas Filter Vessel at Wilsonville

    Article • Particulate Science And Technology, January 2002, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  262. Simulation of earthquake records using time-varying Arma (2,1) model

    Article • Probabilistic Engineering Mechanics, January 2002, Elsevier

    Distinguished Professor Goodarz Ahmadi

  263. Natural gas production from hydrate decomposition by depressurization

    Article • Chemical Engineering Science, October 2001, Elsevier

    Distinguished Professor Goodarz Ahmadi

  264. PASSIVE VIBRATION CONTROL OF AIRBORNE EQUIPMENT USING A CIRCULAR STEEL RING

    Article • Journal of Sound and Vibration, September 2001, Elsevier

    Distinguished Professor Goodarz Ahmadi

  265. Generation of artificial earthquake records with a nonstationary Kanai–Tajimi model

    Article • Engineering Structures, July 2001, Elsevier

    Distinguished Professor Goodarz Ahmadi

  266. Ellipsoidal particles transport and deposition in turbulent channel flows

    Article • International Journal of Multiphase Flow, June 2001, Elsevier

    Distinguished Professor Goodarz Ahmadi

  267. Particle transport and deposition in the hot-gas filter vessel at Wilsonville

    Article • Powder Technology, May 2001, Elsevier

    Distinguished Professor Goodarz Ahmadi

  268. Transport and deposition of flexible fibers in turbulent duct flows

    Article • Journal of Aerosol Science, April 2001, Elsevier

    Distinguished Professor Goodarz Ahmadi

  269. A sublayer model for deposition of nano- and micro-particles in turbulent flows

    Article • Chemical Engineering Science, December 2000, Elsevier

    Distinguished Professor Goodarz Ahmadi

  270. Direct Numerical Simulation of Curly Fibers in Turbulent Channel Flow

    Article • Aerosol Science and Technology, November 2000, Taylor & Francis

    Distinguished Professor Goodarz Ahmadi

  271. Gas–particle two-phase turbulent flow in horizontal and inclined ducts

    Article • International Journal of Engineering Science, November 2000, Elsevier

    Distinguished Professor Goodarz Ahmadi

  272. WALL DEPOSITION OF SMALL ELLIPSOIDS FROM TURBULENT AIR FLOWS—A BROWNIAN DYNAMICS SIMULATION

    Article • Journal of Aerosol Science, October 2000, Elsevier

    Distinguished Professor Goodarz Ahmadi

  273. Electrostatic effects on resuspension of rigid-link fibers in turbulent flows

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, May 2000, Elsevier

    Distinguished Professor Goodarz Ahmadi

  274. Numerical modeling of MDOF structures with sliding supports using rigid-plastic link

    Article • Earthquake Engineering & Structural Dynamics, January 2000, Wiley

    Distinguished Professor Goodarz Ahmadi

  275. Computer simulation of particle transport and deposition near a small isolated building

    Article • Journal of Wind Engineering and Industrial Aerodynamics, January 2000, Elsevier

    Distinguished Professor Goodarz Ahmadi

  276. Particle Adhesion and Removal in Chemical Mechanical Polishing and Post‐CMP Cleaning

    Article • Journal of The Electrochemical Society, July 1999, The Electrochemical Society

    Distinguished Professor Goodarz Ahmadi

  277. PARTICLE DEPOSITION IN A NEARLY DEVELOPED TURBULENT DUCT FLOW WITH ELECTROPHORESIS

    Article • Journal of Aerosol Science, July 1999, Elsevier

    Distinguished Professor Goodarz Ahmadi

  278. Dispersion and deposition of particles in a turbulent pipe flow with sudden expansion

    Article • Journal of Aerosol Science, October 1998, Elsevier

    Distinguished Professor Goodarz Ahmadi

  279. Analysis of operational filtration data Part II: Incomplete cleaning of candle filters

    Article • Powder Technology, June 1998, Elsevier

    Distinguished Professor Goodarz Ahmadi

  280. Analysis of operational filtration data part I. Ideal candle filter behavior

    Article • Powder Technology, November 1997, Elsevier

    Distinguished Professor Goodarz Ahmadi

  281. Deposition of particles in a turbulent pipe flow

    Article • Journal of Aerosol Science, July 1997, Elsevier

    Distinguished Professor Goodarz Ahmadi

  282. Deposition of ellipsoidal particles in turbulent duct flows

    Article • Chemical Engineering Science, December 1996, Elsevier

    Distinguished Professor Goodarz Ahmadi

  283. A rate dependent model for turbulent flows of dilute and dense two phase solid—liquid mixtures

    Article • Powder Technology, October 1996, Elsevier

    Distinguished Professor Goodarz Ahmadi

  284. Analysis of Particle Motion in the Near-Wall Shear Layer Vortices— Application to the Turbulent Deposition Process

    Article • Journal of Colloid and Interface Science, June 1995, Elsevier

    Distinguished Professor Goodarz Ahmadi

  285. Stochastic Model for Microgravity Excitation

    Article • Journal of Aerospace Engineering, April 1995, American Society of Civil Engineers (ASCE)

    Distinguished Professor Goodarz Ahmadi

  286. Simulated orbiter lift-off acceleration: A stochastic model

    Article • Acta Astronautica, January 1995, Elsevier

    Distinguished Professor Goodarz Ahmadi

  287. Vibration Isolation of Launch Vehicle Payload and Its Subsystem

    Article • Journal of Aerospace Engineering, January 1995, American Society of Civil Engineers (ASCE)

    Distinguished Professor Goodarz Ahmadi

  288. Aerosol Particle Deposition with Electrostatic Attraction in a Turbulent Channel Flow

    Article • Journal of Colloid and Interface Science, July 1993, Elsevier

    Distinguished Professor Goodarz Ahmadi

  289. A model for dilatation, densification, and static liquefaction of loose sands

    Article • Journal of the International Association for Mathematical Geology, January 1990, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  290. A probability density closure model for turbulence

    Article • Acta Mechanica, May 1988, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  291. Notizen: Application of Wiener-Hermite Expansion to Strong Plasma Turbulence

    Article • Zeitschrift für Naturforschung A, May 1983, De Gruyter

    Distinguished Professor Goodarz Ahmadi

  292. A Continuum Theory of Smectic A Liquid Crystals

    Article • Journal of Rheology, December 1982, Society of Rheology

    Distinguished Professor Goodarz Ahmadi

  293. A continuum theory for two phase media

    Article • Acta Mechanica, September 1982, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  294. On the development of the salt concentration profile in a solar pond

    Article • Energy, April 1981, Elsevier

    Distinguished Professor Goodarz Ahmadi

  295. On statistical theories of turbulent flow of micropolar fluids

    Article • Acta Mechanica, March 1981, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  296. A possible continuum theory for densification and liquefaction of saturated sand

    Article • Journal of the International Association for Mathematical Geology, February 1981, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  297. Functional calculus in strong plasma turbulence

    Article • Journal of Plasma Physics, December 1980, Cambridge University Press

    Distinguished Professor Goodarz Ahmadi

  298. Performance of a low cost cross-wind-axis sail-wind turbine

    Article • Energy, October 1980, Elsevier

    Distinguished Professor Goodarz Ahmadi

  299. Mean square response of a duffing oscillator to a modulated white noise excitation by the generalized method of equivalent linearization

    Article • Journal of Sound and Vibration, July 1980, Elsevier

    Distinguished Professor Goodarz Ahmadi

  300. Earthquake response of nonlinear plates

    Article • Nuclear Engineering and Design, November 1979, Elsevier

    Distinguished Professor Goodarz Ahmadi

  301. Stability of a cosserat fluid layer heated from below

    Article • Acta Mechanica, September 1979, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  302. On the mean square stability of a class of nonstationary coupled partial differential equations

    Article • Ingenieur-Archiv, January 1979, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  303. Aeroelastic wind energy converter

    Article • Energy Conversion, January 1978, Elsevier

    Distinguished Professor Goodarz Ahmadi

  304. Optical properties of magneto-nonlocal fluids

    Article • Optics Communications, May 1977, Elsevier

    Distinguished Professor Goodarz Ahmadi

  305. Stability of cosserat fluid motions-II on theN-th-order cosserat fluid

    Article • Acta Mechanica, March 1977, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  306. An approximate method for solving Hopf's equation of Burger's model of turbulence

    Article • Applied Scientific Research, July 1976, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  307. Functional Calculus of a Transferable Scalar in a Turbulent Flow

    Article • Zeitschrift für Naturforschung A, December 1975, De Gruyter

    Distinguished Professor Goodarz Ahmadi

  308. Mechanics of a second-order micro-elastic solid

    Article • Rheologica Acta, August 1975, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  309. Stability of mean turbulent flows

    Article • The Physics of Fluids, January 1975, American Institute of Physics

    Distinguished Professor Goodarz Ahmadi

  310. Stability of Cosserat fluid motions

    Article • Archive for Rational Mechanics and Analysis, January 1972, Springer Science + Business Media

    Distinguished Professor Goodarz Ahmadi

  311. A Crcd Course Sequence – Technology Serving Humanity Applications

    Article • American Society for Engineering Education

    Distinguished Professor Goodarz Ahmadi

  312. Particle Transport, Deposition and Removal - A Research-Based Curriculum Development

    Article • American Society for Engineering Education

    Distinguished Professor Goodarz Ahmadi

  313. Particle Transport, Deposition, And Removal: Integration Of Simulation And Experiment

    Article • American Society for Engineering Education

    Distinguished Professor Goodarz Ahmadi

  314. Integration of Simulation and Experiment in Particle Transport, Deposition and Removal

    Article • American Society for Engineering Education

    Distinguished Professor Goodarz Ahmadi

  315. Particle Transport, Deposition And Removal A Combined Research And Curriculum Development Project

    Article • American Society for Engineering Education

    Distinguished Professor Goodarz Ahmadi

  316. Particle Transport, Deposition, and Removal: Integration of Simulations and Experiments

    Article • American Society for Engineering Education

    Distinguished Professor Goodarz Ahmadi