Contact

All Stories

  1. CFD modelling and thermal performance investigation of an industrial shell and tube heat exchanger operated with Al2O3 nanofluids

    Article • January 2024, American Institute of Physics

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi, Mohammed Alshukri

  2. The effects of climate change on photovoltaic solar production in hot regions

    Article • Diagnostyka, August 2022, Polskiego Towarzystwa Diagnostyki Technicznej

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  3. Design and Simulation of Intelligent Maximum Power Point Tracking (MPPT) based on Fuzzy Logic Controller for PV System

    Article • March 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  4. Experimental Study and CFD Modelling for Thermal Cooling Improvement of Electronic Components Using Graphene Nanosheets Coated

    Article • Pertanika Journal of Science and Technology, March 2022, Universiti Putra Malaysia

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  5. Techno-economic Analysis of Wind Turbines Powering Rural of Malaysia

    Article • International Journal of Renewable Energy Development, January 2022, Center of Biomass and Renewable Energy (CBIORE)

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi, Goodarz Ahmadi

  6. Flow parameters effect on water hammer stability in hydraulic system by using state-space method

    Article • Open Engineering, January 2022, De Gruyter

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  7. Water hammer phenomenon in pumping stations: A stability investigation based on root locus

    Article • Open Engineering, January 2022, De Gruyter

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  8. Thermal performance of liquid-cooling systems for PEM fuel cells: A CFD study

    Article • January 2022, American Institute of Physics

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi, Dr. Aimen Zeiny

  9. Analytical and Numerical Investigations of Mechanical Vibration in the Vertical Direction of a Human Body in a Driving Vehicle using Biomechanical Vibration Model

    Article • Pertanika Journal of Science and Technology, October 2021, Universiti Putra Malaysia

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  10. Three-dimensional fluid-thermal-structure multiphysics interaction simulation model of aluminium extrusion process

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, September 2021, Universiti Malaysia Pahang Publisher

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  11. Design and Optimize Future PEM Fuel Cells with a Higher Power Density and Long Cell Life

    Article • SSRN Electronic Journal, January 2021, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  12. CFD analysis of a nanofluid-based microchannel heat sink

    Article • Thermal Science and Engineering Progress, December 2020, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi, Dr. Aimen Zeiny

  13. COVID-19 Spread Faster with Air-Conditioning-Systems

    Article • August 2020, MDPI AG

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  14. Solar PV-Hydrogen-PEM Fuel Cell System

    Article • August 2020, MDPI AG

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  15. Graphene-Coating for Efficient Electronics Cooling

    Article • July 2020, MDPI AG

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  16. An Overview of Hydrogen as an Alternative Fuel

    Article • June 2020, MDPI AG

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  17. Experimental Investigations of Enhanced Micro Structured Heat Sinks

    Article • Journal of Physics Conference Series, May 2020, Institute of Physics Publishing

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  18. Can CFD Analysis Help PEM Fuel Cell Design and Operation?

    Article • April 2020, MDPI AG

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  19. Improvement of Heat Sink Performance by Using Graphene Nanosheets Coated by Chemical Spray Method

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  20. Optimization CFD study of erosion in 3D elbow during transportation of crude oil contaminated with sand particles

    Article • International Journal of Engineering & Technology, July 2018, Science Publishing Corporation

    Professor, PhD Fikrat M. Hassan, Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  21. Design of micro heat sink for power transistor by using CFD

    Article • May 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  22. Mechanical And Thermal Stresses Anylsis In Diesel Engine Poiston With And Without Different Thermal Coating Layer On Piston Head

    Article • International Journal of Advanced Network Monitoring and Controls, January 2016, De Gruyter

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  23. Prediction of Deformation and Hygro-Thermal Stresses Distribution in Ambient Air-Breathing PEM Fuel Cells using Three-Dimensional CFD Model

    Article • Recent Patents on Mechanical Engineering, January 2010, Bentham Science Publishers

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  24. A CFD Analysis of Transport Phenomena and Electrochemical Reactions in a Tubular-shaped Ambient Air-breathing PEM Micro Fuel Cell

    Article • HKIE Transactions, January 2010, The Hong Kong Institution of Engineers

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  25. Performance comparison between airflow-channel and ambient air-breathing PEM fuel cells using three-dimensional computational fluid dynamics models

    Article • Renewable Energy, July 2009, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  26. A CFD study of hygro–thermal stresses distribution in PEM fuel cell during regular cell operation

    Article • Renewable Energy, March 2009, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  27. Prediction of Deformation and Hygro-Thermal Stresses Distribution in Ambient Air-Breathing PEM Fuel Cells using Three-Dimensional CFD Model

    Article • Recent Patents on Mechanical Engineering, January 2009, Bentham Science Publishers

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  28. Studying the effect of material parameters on cell performance of tubular-shaped PEM fuel cell

    Article • Energy Conversion and Management, November 2008, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  29. Three-dimensional computational fluid dynamics model of a tubular-shaped ambient air-breathing proton exchange membrane fuel cell

    Article • Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, September 2008, SAGE Publications

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  30. Three-dimensional computational fluid dynamics model of a tubular-shaped PEM fuel cell

    Article • Renewable Energy, June 2008, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  31. Measurement and prediction study of the effect of ethanol blending on the performance and pollutants emission of a four-stroke spark ignition engine

    Article • Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, May 2008, SAGE Publications

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  32. Effect of PEM Fuel Cell Operation on Gas Diffusion Layers and Membrane Stresses

    Article • International Journal of Fluid Mechanics Research, January 2008, Begell House

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  33. Effect of operating parameters on the hygro–thermal stresses in proton exchange membranes of fuel cells

    Article • International Journal of Hydrogen Energy, December 2007, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  34. Modeling optimizes PEM fuel cell performance using three-dimensional multi-phase computational fluid dynamics model

    Article • Energy Conversion and Management, December 2007, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  35. A simple mathematical model of performance for proton exchange membrane fuel cells

    Article • International Journal of Sustainable Energy, June 2007, Taylor & Francis

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  36. Parametric and optimization study of a PEM fuel cell performance using three-dimensional computational fluid dynamics model

    Article • Renewable Energy, June 2007, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  37. Influence of the Design Parameters in a Proton Exchange Membrane (PEM) Fuel Cell on the Mechanical Behavior of the Polymer Membrane

    Article • Energy & Fuels, May 2007, American Chemical Society (ACS)

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  38. Optimization study of a PEM fuel cell performance using 3D multi-phase computational fluid dynamics model

    Article • Journal of Zhejiang University SCIENCE A, February 2007, Journal of Zhejiang University SCIENCE

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  39. Numerical analysis of a proton exchange membrane fuel cell. Part 1: Model development

    Article • Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, January 2007, SAGE Publications

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  40. Numerical analysis of a proton exchange membrane fuel cell. Part 2: Parametric study

    Article • Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, January 2007, SAGE Publications

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  41. Prediction of hygro—thermal stress distribution in proton exchange membranes using a three-dimensional multi-phase computational fluid dynamics model

    Article • Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, January 2007, SAGE Publications

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  42. Effect of Design Parameters on the Hygro-Thermal Stresses in Proton Exchange Membranes of the Fuel Cells

    Article • Engineering Applications of Computational Fluid Mechanics, January 2007, Taylor & Francis

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  43. Development of a pre-ignition submodel for hydrogen engines

    Article • Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, October 2005, SAGE Publications

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  44. Modelling of proton exchange membrane fuel cell performance based on semi-empirical equations

    Article • Renewable Energy, August 2005, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  45. Effect of compression ratio, equivalence ratio and engine speed on the performance and emission characteristics of a spark ignition engine using hydrogen as a fuel

    Article • Renewable Energy, December 2004, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  46. Improvement of performance and reduction of pollutant emissions of a four-stroke spark ignition engine fuelled with a mixture of hydrogen and methane as a supplementary fuel to alcohol

    Article • Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, May 2004, SAGE Publications

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  47. A prediction study of a spark ignition supercharged hydrogen engine

    Article • Energy Conversion and Management, December 2003, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  48. Hydrogen–ethanol blending as an alternative fuel of spark ignition engines

    Article • Renewable Energy, July 2003, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  49. A study on the hydrogen–ethyl alcohol dual fuel spark ignition engine

    Article • Energy Conversion and Management, January 2002, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  50. The safe operation zone of the spark ignition engine working with dual renewable supplemented fuels (hydrogen+ethyl alcohol)

    Article • Renewable Energy, April 2001, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  51. Performance study of a four-stroke spark ignition engine working with both of hydrogen and ethyl alcohol as supplementary fuel

    Article • International Journal of Hydrogen Energy, October 2000, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  52. Improvement of performance and reduction of pollutant emission of a four stroke spark ignition engine fueled with hydrogen–gasoline fuel mixture

    Article • Energy Conversion and Management, January 2000, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi

  53. A prediction study of the effect of hydrogen blending on the performance and pollutants emission of a four stroke spark ignition engine

    Article • International Journal of Hydrogen Energy, April 1999, Elsevier

    Prof. Dr. Maher A.R. Sadiq Al-Baghdadi