Contact

All Stories

  1. From recycled Mg chips to advanced hydrogen storage: Introducing a solid-state MgNi processing strategy

    Article • Journal of Energy Storage, September 2026, Elsevier

    Prof. Ghader Faraji

  2. Modified hydrostatic backward extrusion: development of a novel plastic deformation process through experimental and finite element analysis

    Article • Archives of Civil and Mechanical Engineering, August 2026, Springer Science + Business Media

    Prof. Ghader Faraji

  3. Upcycling copper chips into Cu–Fe alloys via coating-assisted plasma sintering

    Article • Scientific Reports, August 2026, Springer Science + Business Media

    Prof. Ghader Faraji

  4. A three-dimensional intertwined fiber architecture enables exceptional strength–conductivity synergy in immiscible Cu–Fe systems

    Article • Materials Today Advances, August 2026, Elsevier

    Prof. Ghader Faraji

  5. Multiscale hierarchical Fe–Cu composites manufactured from recycled machining chips

    Article • Journal of Materials Research and Technology, July 2026, Elsevier

    Prof. Ghader Faraji

  6. Tailoring tensile-compression asymmetry in Cu Al composites using 3D intermetallic networks formed by entangled twisting fiber plasma sintering

    Article • Materials Letters, July 2026, Elsevier

    Prof. Ghader Faraji

  7. Processing and characterization of bicontinuous W 50Cu composite produced by entangled fiber plasma sintering (ETFPS) route

    Article • International Journal of Refractory Metals and Hard Materials, June 2026, Elsevier

    Prof. Ghader Faraji

  8. From coated fibers to fully dense alloys: Introducing entangled coated fiber plasma sintering for Cu–Fe systems

    Article • Journal of Materials Research and Technology, May 2026, Elsevier

    Prof. Ghader Faraji

  9. Fatigue performance and failure mechanisms of caliber‑rolled CP‑Ti SLA and SLActive surface modified dental implant

    Article • Materials Today Communications, April 2026, Elsevier

    Prof. Ghader Faraji

  10. Achieving high strength and electrical conductivity in hierarchical structured pure copper

    Article • Archives of Civil and Mechanical Engineering, March 2026, Springer Science + Business Media

    Prof. Ghader Faraji

  11. Gear-Driven Metamaterial Design with Continuously Tunable Stiffness

    Article • International Journal of Applied Mechanics, February 2026, World Scientific Pub Co Pte Lt

    Prof. Ghader Faraji

  12. A new approach for processing fibrous W Cu composite via ARB process

    Article • Materials Letters, February 2026, Elsevier

    Prof. Ghader Faraji

  13. Design, simulation, and experimental validation of metamaterials with direction-dependent stiffness

    Article • Alexandria Engineering Journal, January 2026, Elsevier

    Prof. Ghader Faraji

  14. Non-equal channel angular press bonding (NECAPB) as a novel severe plastic deformation technique: Bonding and interface

    Article • Materials Today Communications, December 2025, Elsevier

    Prof. Ghader Faraji

  15. Fabrication of Cu–Al MMC with randomly-oriented continuous intermetallic layers via entangled twisting fiber plasma sintering

    Article • Journal of Materials Research and Technology, November 2025, Elsevier

    Prof. Ghader Faraji

  16. Microstructure and mechanical properties of pure copper processed via hydrostatic cyclic expansion extrusion

    Article • Journal of Mechanical Science and Technology, November 2025, Springer Science + Business Media

    Prof. Ghader Faraji

  17. A comprehensive review on solid-state recycling of titanium for sustainable engineering applications

    Article • Results in Engineering, September 2025, Elsevier

    Prof. Ghader Faraji

  18. Surface characteristics of nanostructured titanium surface modified via UV irradiation during SLA

    Article • Applied Physics A, July 2025, Springer Science + Business Media

    Prof. Ghader Faraji

  19. Hydrostatic twist extrusion: the effects of hydrostatic fluid pressure on deformation characteristics

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), June 2025, Springer Science + Business Media

    Prof. Ghader Faraji

  20. Erratum to ’ Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review’ [J. Alloys Compd. 1002 (2024) 174667]

    Article • Journal of Alloys and Compounds, June 2025, Elsevier

    Prof. Ghader Faraji

  21. Refinement of ultrahigh aspect ratio pure aluminum through novel hydrostatic twist extrusion: microstructural and mechanical insights

    Article • Journal of Materials Research and Technology, May 2025, Elsevier

    Prof. Ghader Faraji

  22. Fracture behavior of W-20Cu composite processed via copper melt infiltration into tungsten wire skeleton

    Article • Engineering Failure Analysis, May 2025, Elsevier

    Prof. Ghader Faraji

  23. Evaluating the ductile failure characteristics of CuZn30 brass under different stress conditions

    Article • Engineering Failure Analysis, January 2025, Elsevier

    Prof. Ghader Faraji

  24. Numerical and experimental investigation of 3D printed tunable stiffness metamaterial with real-time response using digital light processing technology

    Article • Journal of Materials Research and Technology, November 2024, Elsevier

    Prof. Ghader Faraji

  25. Processing of fully dense and high conductivity W 20Cu composite via copper melt infiltration into a pressed tungsten wire skeleton

    Article • International Journal of Refractory Metals and Hard Materials, November 2024, Elsevier

    Prof. Ghader Faraji

  26. Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review

    Article • Journal of Alloys and Compounds, October 2024, Elsevier

    Dr-Ing. Lembit Kommel, Prof. Ghader Faraji

  27. Sustainable magnesium recycling: Insights into grain refinement through plastic deformation-assisted solid-state recycling (SSR)

    Article • Journal of Magnesium and Alloys, October 2024, Tsinghua University Press

    Prof. Ghader Faraji

  28. Solid-state recycling of magnesium and its alloys via plastic deformation: An overview of processing and properties

    Article • Journal of Materials Research and Technology, July 2024, Elsevier

    Prof. Ghader Faraji

  29. Simultaneous Enhancement of Strength and Ductility in AM60 Tubes Using a Novel Approach of Modified Tube Cyclic Expansion Extrusion

    Article • JOM, January 2024, Springer Science + Business Media

    Prof. Ghader Faraji

  30. Processing of different Mg-based multiphase alloys via a combined severe plastic deformation

    Article • Materials Science and Technology, January 2024, SAGE Publications

    Prof. Ghader Faraji

  31. Specimen Size Effect on Behavior of Mg–3Al–1Zn Magnesium Alloy in Macro to Micro-scale Deformation

    Article • International Journal of Precision Engineering and Manufacturing, October 2023, Springer Science + Business Media

    Prof. Ghader Faraji

  32. An In-Vivo Study on Nanostructured Ti Dental Implant Produced by Caliber Rolling and Surface Modification by SLActive

    Article • JOM, August 2023, Springer Science + Business Media

    Prof. Ghader Faraji

  33. Recent Progress on SPD Processes Empowered by Hydrostatic Pressure

    Article • MATERIALS TRANSACTIONS, August 2023, Japan Institute of Metals

    Prof. Ghader Faraji

  34. Formability Behavior of the Ultrafine Grained Thin-Walled Tubes During Square-Sectional Hydroforming Process

    Article • Transactions of the Indian Institute of Metals, May 2023, Springer Science + Business Media

    Prof. Ghader Faraji

  35. Characterization of Mg–9Al–1Zn-0.2Mn alloy tubes processed by a new modified tube cyclic expansion extrusion (M-TCEE) process

    Article • Journal of Materials Research and Technology, May 2023, Elsevier

    Prof. Ghader Faraji

  36. Microstructural, Mechanical, Texture and Corrosion Properties of Severely Deformed AZ31 Alloy with Sr Addition

    Article • JOM, April 2023, Springer Science + Business Media

    Prof. Ghader Faraji

  37. Excellent Mechanical Properties, Wettability and Biological Response of Ultrafine-Grained Pure Ti Dental Implant Surface Modified by SLActive

    Article • Journal of Materials Engineering and Performance, February 2023, Springer Science + Business Media

    Prof. Ghader Faraji

  38. Hydrostatic twist extrusion (HTE) for processing relatively long ultrafine grained samples

    Article • Materials Letters, February 2023, Elsevier

    Prof. Ghader Faraji

  39. Design of Refractory Alloys for Desired Thermal Conductivity via AI-Assisted In-Silico Microstructure Realization

    Article • Materials, January 2023, MDPI AG

    Prof. Ghader Faraji

  40. Microstructural and Mechanical Evaluation of Pure Copper Rods Processed by Severe Plastic Deformation Method of Hydrostatic Cyclic Extrusion Compression

    Article • Journal of Materials Engineering and Performance, December 2022, Springer Science + Business Media

    Prof. Ghader Faraji

  41. Texture evolution and mechanical anisotropy of an ultrafine/nano-grained pure copper tube processed via hydrostatic tube cyclic expansion extrusion

    Article • International Journal of Minerals Metallurgy and Materials, November 2022, Springer Science + Business Media

    Prof. Ghader Faraji

  42. Slow strain rate shear test: A novel localized method for evaluating stress corrosion cracking of biodegradable Mg alloys

    Article • Materials Science and Engineering A, October 2022, Elsevier

    Prof. Ghader Faraji

  43. Fabrication of W-Cu composite by wire crumpling and subsequent melt infiltration

    Article • Materials Letters, August 2022, Elsevier

    Prof. Ghader Faraji

  44. Fabrication of functionally graded W Cu composite via variable speed induction sintering and subsequent infiltration

    Article • International Journal of Refractory Metals and Hard Materials, August 2022, Elsevier

    Prof. Ghader Faraji

  45. Formability enhancement of ultrafine-grained pure copper sheets produced by accumulative roll bonding aided by electromagnetic forming

    Article • The International Journal of Advanced Manufacturing Technology, April 2022, Springer Science + Business Media

    Prof. Ghader Faraji

  46. Nanomaterials by severe plastic deformation: review of historical developments and recent advances

    Article • Materials Research Letters, February 2022, Taylor & Francis

    Dr. Nobuhiro Tsuji, Prof. Ghader Faraji

  47. Fabrication of Al/Mg Bimetallic Thin-Walled Ultrafine-Grained Tube by Severe Plastic Deformation

    Article • Journal of Materials Engineering and Performance, January 2022, Springer Science + Business Media

    Prof. Ghader Faraji

  48. Formability Enhancement of Ultra-Fine Grained Pure Copper Sheets Produced by Accumulative Roll Bonding Aided by Electromagnetic Forming

    Article • October 2021, Research Square

    Prof. Ghader Faraji

  49. Hydrostatic Tube Cyclic Extrusion Compression as a Novel Severe Plastic Deformation Method for Fabricating Long Nanostructured Tubes

    Article • Metals and Materials International, September 2021, Springer Science + Business Media

    Prof. Ghader Faraji

  50. Processing of commercially pure copper tubes by hydrostatic tube cyclic extrusion–compression (HTCEC) as a new SPD method

    Article • Archives of Civil and Mechanical Engineering, July 2021, Springer Science + Business Media

    Prof. Ghader Faraji

  51. Processing and characterization of AZ91 magnesium alloys via a novel severe plastic deformation method: Hydrostatic cyclic extrusion compression (HCEC)

    Article • Transactions of Nonferrous Metals Society of China, May 2021, Elsevier

    Prof. Ghader Faraji

  52. Properties inhomogeneity of AM60 magnesium alloy processed by cyclic extrusion compression angular pressing followed by extrusion

    Article • Transactions of Nonferrous Metals Society of China, March 2021, Elsevier

    Prof. Ghader Faraji

  53. Influences of the constrained groove pressing on microstructural, mechanical, and fracture properties of brass sheets

    Article • Materials Research Express, November 2020, Institute of Physics Publishing

    Professor Ramin Hashemi, Prof. Ghader Faraji

  54. Processing of long ultrafine-grained AM60 magnesium alloy tube by hydrostatic tube cyclic expansion extrusion (HTCEE) under high fluid pressure

    Article • The International Journal of Advanced Manufacturing Technology, November 2020, Springer Science + Business Media

    Prof. Ghader Faraji

  55. Microstructure and Mechanical Properties of AM60 Magnesium Alloy Processed by a New Severe Plastic Deformation Technique

    Article • Metals and Materials International, October 2020, Springer Science + Business Media

    Prof. Ghader Faraji

  56. In-vivo study of ultrafine-grained CP-Ti dental implants surface modified by SLActive with excellent wettability

    Article • International Journal of Adhesion and Adhesives, October 2020, Elsevier

    Prof. Ghader Faraji

  57. Synergistic enhancement of photocatalytic antibacterial effects in high-strength aluminum/TiO2 nanoarchitectures

    Article • Ceramics International, October 2020, Elsevier

    Prof. Ghader Faraji

  58. Hydrostatic cyclic extrusion compression (HCEC) process; a new CEC counterpart for processing long ultrafine-grained metals

    Article • Archives of Civil and Mechanical Engineering, September 2020, Springer Science + Business Media

    Prof. Ghader Faraji

  59. Microstructural, Mechanical and Corrosion Properties of AZ91 Magnesium Alloy Processed by a Severe Plastic Deformation Method of Hydrostatic Cyclic Expansion Extrusion

    Article • Metals and Materials International, August 2020, Springer Science + Business Media

    Prof. Ghader Faraji

  60. A New Modified Cyclic Extrusion Channel Angular Pressing (CECAP) Process for Producing Ultrafine-Grained Mg Alloy

    Article • Transactions of the Indian Institute of Metals, August 2020, Springer Science + Business Media

    Prof. Ghader Faraji

  61. Processing characterization of binary Mg-Zn alloys fabricated by a new powder consolidation combined severe plastic deformation method

    Article • Journal of Alloys and Compounds, August 2020, Elsevier

    Prof. Ghader Faraji

  62. Processing of AM60 magnesium alloy by hydrostatic cyclic expansion extrusion at elevated temperature as a new severe plastic deformation method

    Article • International Journal of Minerals Metallurgy and Materials, May 2020, Springer Science + Business Media

    Prof. Ghader Faraji

  63. Development of a new integrated severe plastic deformation method

    Article • Materials Science and Technology, March 2020, SAGE Publications

    Prof. Ghader Faraji

  64. Microstructure, mechanical properties and bio-corrosion properties of Mg-HA bionanocomposites fabricated by a novel severe plastic deformation process

    Article • Ceramics International, February 2020, Elsevier

    Prof. Ghader Faraji

  65. Processing and properties of ultrafine-grained Mg-3Al-1Zn magnesium alloy microtubes fabricated via isothermal hot microforming of SPD processed precursors

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), January 2020, De Gruyter

    Prof. Ghader Faraji

  66. Mechanical properties and in vivo biodegradability of Mg–Zr–Y–Nd–La magnesium alloy produced by a combined severe plastic deformation

    Article • Rare Metals, December 2019, Wiley

    Prof. Ghader Faraji

  67. Microstructure and Mechanical Properties of the Commercially Pure Copper Tube After Processing by Hydrostatic Tube Cyclic Expansion Extrusion (HTCEE)

    Article • Metals and Materials International, November 2019, Springer Science + Business Media

    Prof. Ghader Faraji

  68. Experimental and Modelling Study of Ultra-Fine Grained ZK60 Magnesium Alloy with Simultaneously Improved Strength and Ductility Processed by Parallel Tubular Channel Angular Pressing

    Article • Metals and Materials International, November 2019, Springer Science + Business Media

    Prof. Ghader Faraji

  69. Surface and Bulk Modification of Titanium Grade 2 Substrates for Enhanced Biological Activity

    Article • JOM, October 2019, Springer Science + Business Media

    Prof. Ghader Faraji

  70. A New Approach for Consolidation of Pure Magnesium Powder Using an Integrated Severe Plastic Deformation Route

    Article • Journal of Materials Engineering and Performance, August 2019, Springer Science + Business Media

    Prof. Ghader Faraji

  71. Surface characterization of nanostructured commercially pure titanium modified by sandblasting and acid-etching for implant applications

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, July 2019, SAGE Publications

    Prof. Ghader Faraji

  72. An Overview on the Continuous Severe Plastic Deformation Methods

    Article • MATERIALS TRANSACTIONS, July 2019, Japan Institute of Metals

    Prof. Ghader Faraji

  73. Deformation Behavior, Microstructure and Microhardness of Mg–3Al–1Zn Microtubes Processed by Isothermal Micro-Backward Extrusion

    Article • Transactions of the Indian Institute of Metals, June 2019, Springer Science + Business Media

    Prof. Ghader Faraji

  74. Processing and Properties of Biodegradable Magnesium Microtubes for Using as Vascular Stents: A Brief Review

    Article • Metals and Materials International, May 2019, Springer Science + Business Media

    Prof. Ghader Faraji

  75. Hydrostatic tube cyclic expansion extrusion (HTCEE) as a new severe plastic deformation method for producing long nanostructured tubes

    Article • Journal of Alloys and Compounds, May 2019, Elsevier

    Prof. Ghader Faraji

  76. Mechanical Properties and Microstructure of WE43 Mg Alloy Processed by Warm ECAPFollowed by Extrusion

    Article • Archives of Metallurgy and Materials, October 2018, Polish Academy of Sciences Chancellery

    Prof. Ghader Faraji

  77. Evaluation of Microstructure and Mechanical Properties of Multilayer Al5052–Cu Composite Produced by Accmulative Roll Bonding

    Article • Powder Metallurgy and Metal Ceramics, July 2018, Springer Science + Business Media

    Professor Ramin Hashemi, Prof. Ghader Faraji

  78. Interface sheet-constrained groove pressing as a modified severe plastic deformation process

    Article • Materials Science and Technology, June 2018, Taylor & Francis

    Mehdi Safari, Prof. Ghader Faraji

  79. Recrystallization and mechanical properties of WE43 magnesium alloy processed via cyclic expansion extrusion

    Article • International Journal of Minerals Metallurgy and Materials, May 2018, Springer Science + Business Media

    Prof. Ghader Faraji

  80. Manufacturing and mechanical characterization of Mg-4Y-2Nd-0.4Zr-0.25La magnesium microtubes by combined severe plastic deformation process for biodegradable vascular stents

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, May 2018, SAGE Publications

    Prof. Ghader Faraji

  81. Microstructure and mechanical properties of Al/Cu/Mg laminated composite sheets produced by the ARB proces

    Article • International Journal of Minerals Metallurgy and Materials, May 2018, Springer Science + Business Media

    Professor Ramin Hashemi, Prof. Ghader Faraji

  82. Enhanced Hot Tensile Ductility of Mg-3Al-1Zn Alloy Thin-Walled Tubes Processed Via a Combined Severe Plastic Deformation

    Article • Journal of Materials Engineering and Performance, April 2018, Springer Science + Business Media

    Prof. Ghader Faraji

  83. Hot tensile deformation behavior of Mg-Zn-Al magnesium alloy tubes processed by severe plastic deformation

    Article • Journal of Alloys and Compounds, April 2018, Elsevier

    Prof. Ghader Faraji

  84. Hydrostatic cyclic expansion extrusion (HCEE) as a novel severe plastic deformation process for producing long nanostructured metals

    Article • Materials Science and Engineering A, March 2018, Elsevier

    Prof. Ghader Faraji

  85. Severe Plastic Deformation

    Article • January 2018, Elsevier

    Prof. Ghader Faraji

  86. Microstructure and Mechanical Properties of CP-Titanium Processed by ECAP Followed by Warm Caliber Rolling

    Article • Transactions of the Indian Institute of Metals, December 2017, Springer Science + Business Media

    Prof. Ghader Faraji

  87. Investigation on thermal stresses in FGM hyperelastic thick-walled cylinders

    Article • Journal of Thermal Stresses, December 2017, Taylor & Francis

    Prof. Ghader Faraji

  88. Effect of nanofiller geometry on the energy absorption capability of coiled carbon nanotube composite material

    Article • Composites Science and Technology, December 2017, Elsevier

    Prof. Ghader Faraji

  89. Microstructure and mechanical properties of fine-grained thin-walled AZ91 tubes processed by a novel combined SPD process

    Article • Bulletin of Materials Science, November 2017, Springer Science + Business Media

    Prof. Ghader Faraji

  90. Severe Plastic Deformation of Commercial Pure Titanium (CP-Ti) for Biomedical Applications: A Brief Review

    Article • JOM, November 2017, Springer Science + Business Media

    Prof. Ghader Faraji

  91. A combined method for producing high strength and ductility magnesium microtubes for biodegradable vascular stents application

    Article • Journal of Alloys and Compounds, November 2017, Elsevier

    Prof. Ghader Faraji

  92. A Combined Analytical–Numerical Investigation on Photosensitive Hydrogel Micro-Valves

    Article • International Journal of Applied Mechanics, October 2017, World Scientific Pub Co Pte Lt

    Prof. Ghader Faraji

  93. Microstructure and homogeneity of semi-solid 7075 aluminum tubes processed by parallel tubular channel angular pressing

    Article • Metals and Materials International, September 2017, Springer Science + Business Media

    Prof. Ghader Faraji

  94. Microstructure and hardness inhomogeneity of fine-grained AM60 magnesium alloy subjected to cyclic expansion extrusion (CEE)

    Article • Journal of Manufacturing Processes, August 2017, Elsevier

    Prof. Ghader Faraji

  95. Processing and characterization of nanostructured Grade 2 Ti processed by combination of warm isothermal ECAP and extrusion

    Article • Materials Science and Engineering A, August 2017, Elsevier

    Prof. Ghader Faraji

  96. An Enhanced Steady-State Constitutive Model for Semi-solid Forming of Al7075 Based on Cross Model

    Article • Metallurgical and Materials Transactions A, July 2017, Springer Science + Business Media

    Prof. Ghader Faraji

  97. Cyclic extrusion compression angular pressing (CECAP) as a novel severe plastic deformation method for producing bulk ultrafine grained metals

    Article • Materials Letters, June 2017, Elsevier

    Prof. Ghader Faraji

  98. Properties and Mechanism of Al/St Bimetal Tube Bonding Produced by Cold Spin-Bonding (CSB) Process

    Article • Transactions of the Indian Institute of Metals, April 2017, Springer Science + Business Media

    Prof. Ghader Faraji

  99. Surface modification of severe plastically deformed ultrafine grained pure titanium by plasma electrolytic oxidation

    Article • Surface and Coatings Technology, April 2017, Elsevier

    Prof. Ghader Faraji

  100. Effect of mechanical anisotropy on the energy absorption capacity in thin-walled tubes

    Article • Materials Testing, February 2017, De Gruyter

    Prof. Ghader Faraji

  101. A new designed incremental high pressure torsion process for producing long nanostructured rod samples

    Article • Journal of Alloys and Compounds, February 2017, Elsevier

    Prof. Ghader Faraji

  102. Investigation of the property hull for solid oxide fuel cell microstructures

    Article • Computational Materials Science, February 2017, Elsevier

    Prof. Ghader Faraji

  103. Hot deformation behavior of Mg-Zn-Al alloy tube processed by severe plastic deformation

    Article • Archives of Metallurgy and Materials, January 2017, De Gruyter

    Prof. Ghader Faraji

  104. Combined effects of ECAP and subsequent heating parameters on semi-solid microstructure of 7075 aluminum alloy

    Article • Transactions of Nonferrous Metals Society of China, December 2016, Elsevier

    Prof. Ghader Faraji

  105. Microstructure and Mechanical Properties of Al Tube Processed by Friction Stir Tube Back Extrusion (FSTBE)

    Article • Transactions of the Indian Institute of Metals, November 2016, Springer Science + Business Media

    Prof. Ghader Faraji

  106. Nano-mechanical properties and microstructure of UFG brass tubes processed by parallel tubular channel angular pressing

    Article • Metals and Materials International, October 2016, Springer Science + Business Media

    Prof. Ghader Faraji

  107. Fretting fatigue life investigation of AL7075-T6 alloy coated by multilayer thin solid films of TiCr/TiN/CrN and Ti/Cr/TiN/Cr/CrN/TiCrN

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, September 2016, SAGE Publications

    Prof. Ghader Faraji

  108. Hot tensile deformation and fracture behavior of ultrafine-grained AZ31 magnesium alloy processed by severe plastic deformation

    Article • Materials Science and Engineering A, September 2016, Elsevier

    Prof. Ghader Faraji

  109. Rubber pad tube straining as a new severe plastic deformation method for thin-walled cylindrical tubes

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, August 2016, SAGE Publications

    Prof. Ghader Faraji

  110. Review of principles and methods of severe plastic deformation for producing ultrafine-grained tubes

    Article • Materials Science and Technology, August 2016, Taylor & Francis

    Prof. Ghader Faraji

  111. Evaluation of Hot Tensile Behavior of Fine-Grained Mg–9Al–1Zn Alloy Tube Processed by Severe Plastic Deformation

    Article • Transactions of the Indian Institute of Metals, July 2016, Springer Science + Business Media

    Prof. Ghader Faraji

  112. Evaluation of mechanical and metallurgical properties of AZ91 seamless tubes produced by radial-forward extrusion method

    Article • Materials Science and Engineering A, June 2016, Elsevier

    Prof. Ghader Faraji

  113. Hydrostatic radial forward tube extrusion as a new plastic deformation method for producing seamless tubes

    Article • The International Journal of Advanced Manufacturing Technology, April 2016, Springer Science + Business Media

    Prof. Ghader Faraji

  114. A Numerical and Experimental Study of Constrained Ironing Process as a Novel High Thickness Reduction Ironing Method

    Article • Transactions of the Indian Institute of Metals, March 2016, Springer Science + Business Media

    Prof. Ghader Faraji

  115. Friction Study in Equal Channel Multi Angular Pressing: Load Curve and Ring Compression tests

    Article • Transactions of the Indian Institute of Metals, March 2016, Springer Science + Business Media

    Prof. Ghader Faraji

  116. Electron back-scattered diffraction and nanoindentation analysis of nanostructured Al tubes processed by multipass tubular-channel angular pressing

    Article • Metals and Materials International, March 2016, Springer Science + Business Media

    Prof. Ghader Faraji

  117. Corrigendum to “TiO2 nanotube coating on stainless steel 304 for biomedical applications” [Ceram. Int. 41 (2015) 2785–2793]

    Article • Ceramics International, December 2015, Elsevier

    Dr Shahaboddin Shamshirband, Dr S shamshirband, Prof. Ghader Faraji

  118. Cyclic Flaring and Sinking (CFS) as a New Severe Plastic Deformation Method for Thin-walled Cylindrical Tubes

    Article • Transactions of the Indian Institute of Metals, November 2015, Springer Science + Business Media

    Prof. Ghader Faraji

  119. Evaluation of the microstructure and mechanical properties of the ultrafine grained thin-walled tubes processed by severe plastic deformation

    Article • Metals and Materials International, November 2015, Springer Science + Business Media

    Professor Ramin Hashemi, Prof. Ghader Faraji

  120. Analytical and experimental investigations on the novel hydro ironing process

    Article • The International Journal of Advanced Manufacturing Technology, September 2015, Springer Science + Business Media

    Prof. Ghader Faraji

  121. Development of a novel bulk plastic deformation method: hydrostatic backward extrusion

    Article • The International Journal of Advanced Manufacturing Technology, July 2015, Springer Science + Business Media

    Prof. Ghader Faraji

  122. Deformation speed and temperature effects on magnesium AZ91 during tubular channel angular pressing

    Article • Materials Science and Technology, April 2015, Taylor & Francis

    Prof. Ghader Faraji

  123. A Novel Ironing Process with Extra High Thickness Reduction: Constrained Ironing

    Article • Materials and Manufacturing Processes, April 2015, Taylor & Francis

    Prof. Ghader Faraji

  124. Erratum to: Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation

    Article • Metallurgical and Materials Transactions A, April 2015, Springer Science + Business Media

    Prof. Ghader Faraji

  125. The Effects of the Multi-pass Parallel Tubular Channel Angular Pressing on the Microstructure and Mechanical Properties of the Cu–Zn Tubes

    Article • Transactions of the Indian Institute of Metals, March 2015, Springer Science + Business Media

    Prof. Ghader Faraji

  126. Mathematical modeling and optimization of friction stir welding process parameters in AA5083 and AA7075 aluminum alloy joints

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, March 2015, SAGE Publications

    Prof. Ghader Faraji

  127. Design and optimization of turbine blade preform forging using RSM and NSGA II

    Article • Journal of Intelligent Manufacturing, March 2015, Springer Science + Business Media

    Prof. Ghader Faraji

  128. TiO2 nanotube coating on stainless steel 304 for biomedical applications

    Article • Ceramics International, March 2015, Elsevier

    Dr S shamshirband, Dr Shahaboddin Shamshirband, Prof. Ghader Faraji

  129. A novel combined severe plastic deformation method for producing thin-walled ultrafine grained cylindrical tubes

    Article • Materials Letters, March 2015, Elsevier

    Prof. Ghader Faraji

  130. Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation

    Article • Metallurgical and Materials Transactions A, February 2015, Springer Science + Business Media

    Prof. Ghader Faraji

  131. Producing high strength aluminum alloy by combination of equal channel angular pressing and bake hardening

    Article • Materials Letters, February 2015, Elsevier

    Prof. Ghader Faraji

  132. Severe mechanical anisotropy of high-strength ultrafine grained Cu–Zn tubes processed by parallel tubular channel angular pressing (PTCAP)

    Article • Materials Science and Engineering A, February 2015, Elsevier

    Prof. Ghader Faraji

  133. The stress intensity factors (SIFs) of cracked half-plane specimen in contact with semi-circular object

    Article • Theoretical and Applied Fracture Mechanics, February 2015, Elsevier

    Prof. Ghader Faraji

  134. Microstructure and Mechanical Properties of Ultra-fine-Grained Al-Mg-Si Tubes Produced by Parallel Tubular Channel Angular Pressing Process

    Article • Metallurgical and Materials Transactions A, January 2015, Springer Science + Business Media

    Prof. Ghader Faraji

  135. Cold backward extrusion of polyamide

    Article • Journal of Power Electronics, January 2015, De Gruyter

    Mr. Babak Manafi, Mehdi Saeidi, Prof. Ghader Faraji

  136. Applicability of a modified backward extrusion process on commercially pure aluminum

    Article • Materials & Design (1980-2015), January 2015, Elsevier

    Prof. Ghader Faraji

  137. Statement of Retraction

    Article • Materials and Manufacturing Processes, December 2014, Taylor & Francis

    Prof. Ghader Faraji

  138. Hydroironing: A Novel Ironing Method with a Higher Thickness Reduction

    Article • Materials and Manufacturing Processes, November 2014, Taylor & Francis

    Prof. Ghader Faraji

  139. Development of a novel method for the backward extrusion

    Article • Materials & Design (1980-2015), October 2014, Elsevier

    Prof. Ghader Faraji

  140. A methodology for determination of extended strain-based forming limit curve considering the effects of strain path and normal stress

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, August 2014, SAGE Publications

    Professor Ramin Hashemi, Prof. Ghader Faraji

  141. Evaluation of residual stress in ultrafine-grained aluminum tubes using shearography

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, June 2014, SAGE Publications

    Prof. Ghader Faraji

  142. Excellent energy absorption capacity of nanostructured Cu–Zn thin-walled tube

    Article • Materials Science and Engineering A, April 2014, Elsevier

    Prof. Ghader Faraji

  143. Ultrasonic assisted tubular channel angular pressing process

    Article • Materials Science and Engineering A, April 2014, Elsevier

    Prof. Ghader Faraji

  144. Mechanical and Microstructural Properties of Ultra-fine Grained AZ91 Magnesium Alloy Tubes Processed via Multi Pass Tubular Channel Angular Pressing (TCAP)

    Article • Journal of Material Science and Technology, February 2014, Elsevier

    Prof. Ghader Faraji

  145. Characterization of nanostructured pure aluminum tubes produced by tubular channel angular pressing (TCAP)

    Article • Materials Science and Engineering A, January 2014, Elsevier

    Prof. Ghader Faraji

  146. A novel approach for preparation of aligned electrospun polyacrylonitrile nanofibers

    Article • Chemical Physics Letters, December 2013, Elsevier

    Prof. Ghader Faraji

  147. Preform Shape Design in Tube Hydroforming Process Using Equi-Potential Line Method

    Article • Materials and Manufacturing Processes, March 2013, Taylor & Francis

    Prof. Ghader Faraji

  148. TEM analysis and determination of dislocation densities in nanostructured copper tube produced via parallel tubular channel angular pressing process

    Article • Materials Science and Engineering A, February 2013, Elsevier

    Prof. Ghader Faraji

  149. Mechanical properties and microstructural evolution during multi-pass ECAR of Al 1100–O alloy

    Article • Materials & Design (1980-2015), December 2012, Elsevier

    Prof. Ghader Faraji

  150. Repetitive forging (RF) using inclined punches as a new bulk severe plastic deformation method

    Article • Materials Science and Engineering A, December 2012, Elsevier

    Prof. Ghader Faraji

  151. A numerical and experimental study on tubular channel angular pressing (TCAP) process

    Article • Journal of Mechanical Science and Technology, November 2012, Springer Science + Business Media

    Prof. Ghader Faraji

  152. Analysis of lateral extrusion of gear-like form parts

    Article • Journal of Mechanical Science and Technology, October 2012, Springer Science + Business Media

    Prof. Ghader Faraji

  153. An upper-bound analysis for frictionless TCAP process

    Article • Archive of Applied Mechanics, August 2012, Springer Science + Business Media

    Prof. Ghader Faraji

  154. Parallel tubular channel angular pressing (PTCAP) as a new severe plastic deformation method for cylindrical tubes

    Article • Materials Letters, June 2012, Elsevier

    Prof. Ghader Faraji

  155. Characterization of ultra-fine grained aluminum produced by accumulative back extrusion (ABE)

    Article • Materials Characterization, June 2012, Elsevier

    Prof. Ghader Faraji

  156. Accumulative Torsion Back (ATB) Processing as a New Plastic Deformation Technique

    Article • Materials and Manufacturing Processes, May 2012, Taylor & Francis

    Prof. Ghader Faraji

  157. Microstructural Evolution of UFG Magnesium Alloy Produced by Accumulative Back Extrusion (ABE)

    Article • Materials and Manufacturing Processes, March 2012, Taylor & Francis

    Prof. Ghader Faraji

  158. Numerical and experimental investigation of the deformation behavior during the accumulative back extrusion of an AZ91 magnesium alloy

    Article • Materials & Design (1980-2015), March 2012, Elsevier

    Prof. Ghader Faraji

  159. Deformation behavior in the tubular channel angular pressing (TCAP) as a noble SPD method for cylindrical tubes

    Article • Applied Physics A, February 2012, Springer Science + Business Media

    Prof. Ghader Faraji

  160. Deformation Behavior in Tubular Channel Angular Pressing (TCAP) Using Triangular and Semicircular Channels

    Article • MATERIALS TRANSACTIONS, January 2012, Japan Institute of Metals

    Prof. Ghader Faraji

  161. Tubular channel angular pressing (TCAP) as a novel severe plastic deformation method for cylindrical tubes

    Article • Materials Letters, October 2011, Elsevier

    Prof. Ghader Faraji

  162. Producing Ultrafine Grain Al6061 Alloy by Accumulative Back Extrusion Process

    Article • Journal of Materials Engineering and Performance, August 2011, Springer Science + Business Media

    Prof. Ghader Faraji

  163. Microstructures and mechanical properties of Al 2 O 3 /AZ91 surface nanocomposite layer produced by friction stir processing

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, July 2011, SAGE Publications

    Prof. Ghader Faraji

  164. Microstructure inhomogeneity in ultra-fine grained bulk AZ91 produced by accumulative back extrusion (ABE)

    Article • Materials Science and Engineering A, May 2011, Elsevier

    Prof. Ghader Faraji

  165. Experimental Investigation of Magnesium-Base Nanocomposite Produced by Friction Stir Processing: Effects of Particle Types and Number of Friction Stir Processing Passes

    Article • Metallurgical and Materials Transactions A, April 2011, Springer Science + Business Media

    Prof. Ghader Faraji

  166. Characterization of AZ91/alumina nanocomposite produced by FSP

    Article • Materials Science and Engineering A, March 2011, Elsevier

    Prof. Ghader Faraji

  167. Effect of Process Parameters on Microstructure and Micro-hardness of AZ91/Al2O3 Surface Composite Produced by FSP

    Article • Journal of Materials Engineering and Performance, January 2011, Springer Science + Business Media

    Prof. Ghader Faraji

  168. Hydroforming Limits in Metal Bellows Forming Process

    Article • Materials and Manufacturing Processes, December 2010, Taylor & Francis

    Professor Ramin Hashemi, Prof. Ghader Faraji

  169. Producing Ultrafine-Grained AZ91 from As-Cast AZ91 by FSP

    Article • Materials and Manufacturing Processes, December 2010, Taylor & Francis

    Prof. Ghader Faraji

  170. Producing of AZ91/SiC composite by friction stir processing (FSP)

    Article • The International Journal of Advanced Manufacturing Technology, April 2010, Springer Science + Business Media

    Prof. Ghader Faraji

  171. Using the finite element method for achieving an extra high limiting drawing ratio (LDR) of 9 for cylindrical components

    Article • CIRP Journal of Manufacturing Science and Technology, January 2010, Elsevier

    Professor Ramin Hashemi, Prof. Ghader Faraji

  172. Application of the hydroforming strain- and stress-limit diagrams to predict necking in metal bellows forming process

    Article • The International Journal of Advanced Manufacturing Technology, June 2009, Springer Science + Business Media

    Professor Ramin Hashemi, Prof. Ghader Faraji

  173. Evaluation of effective parameters in metal bellows forming process

    Article • Journal of Materials Processing Technology, April 2009, Elsevier

    Prof. Ghader Faraji

  174. Experimental and finite element analysis of parameters in manufacturing of metal bellows

    Article • The International Journal of Advanced Manufacturing Technology, September 2007, Springer Science + Business Media

    Prof. Ghader Faraji