Contact

All Stories

  1. Design and experimental evaluation of a topology-optimized metamaterial cell fabricated via 3D printing for enhanced energy absorption

    Article • Results in Engineering, June 2026, Elsevier

    Professor Ramin Hashemi

  2. Fused deposition modeling’s compressive behavior through a new finite element approach

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, May 2026, Springer Science + Business Media

    Professor Ramin Hashemi

  3. How Three-Layer Sheets Behave in Incremental Forming

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), April 2026, Springer Science + Business Media

    Professor Ramin Hashemi

  4. Influence of roll bonding on texture evolution and mechanical performance of aluminum–magnesium bilayers

    Article • Materials Today Communications, March 2026, Elsevier

    Professor Ramin Hashemi

  5. Multi response optimization in MQL milling of GTD450 stainless steel using an integrated Taguchi grey relational analysis

    Article • Scientific Reports, December 2025, Springer Science + Business Media

    Professor Ramin Hashemi

  6. Investigating the effect of annealing on the forming limit and mechanical properties of tri-layer copper/304L stainless steel /copper composite sheets

    Article • Results in Materials, December 2025, Elsevier

    Professor Ramin Hashemi

  7. Evaluation of constitutive modeling for dynamic plastic-fracture modeling of dual phase (DP590) steel sheets

    Article • Journal of Materials Research and Technology, May 2025, Elsevier

    Professor Ramin Hashemi

  8. Effects of Thickness and Reduction Ratios on the Microstructure and Mechanical Properties of Cold Roll-bonded Al1050/SS304 Bilayer Sheets

    Article • Journal of Materials Engineering and Performance, April 2025, Springer Science + Business Media

    Professor Ramin Hashemi

  9. Performance evaluation and optimization of the static ultrasonic welding of GF/PA6 thermoplastic composite

    Article • The International Journal of Advanced Manufacturing Technology, April 2025, Springer Science + Business Media

    Professor Ramin Hashemi

  10. Annealing temperature influence on forming limit curve and fracture toughness of aluminium/silver bilayer sheets

    Article • Journal of Central South University, January 2025, Springer Science + Business Media

    Professor Ramin Hashemi

  11. Effects of layer arrangement, pin size, polyurethane thickness, and polyurethane hardness on forming limits of Al/Cu bimetallic sheets through multi-point forming process

    Article • Journal of Materials Research and Technology, January 2025, Elsevier

    Professor Ramin Hashemi

  12. Stress relief treatment of aluminum/magnesium laminates fabricated by roll bonding technique

    Article • Heliyon, January 2025, Elsevier

    Professor Ramin Hashemi

  13. An empirical-mathematical model for predicting and optimizing mechanical properties of cold roll bonded Al1050/SUS304 bilayer sheets

    Article • Journal of Materials Research, December 2024, Springer Science + Business Media

    Professor Ramin Hashemi

  14. Numerical and experimental study of three-layered Al 1050/Mg AZ31B/ Al 1050 sheets formability considering strain and stress conditions through single point incremental forming

    Article • Materials Today Communications, December 2024, Elsevier

    Professor Ramin Hashemi

  15. Predicting 3D printed plastic part properties: A deep learning approach with thermographic and vibration data fusion

    Article • Expert Systems with Applications, December 2024, Elsevier

    Professor Ramin Hashemi

  16. Characterizing the tool wear morphologies and life in milling A520-10%SiC under various lubrication and cutting conditions

    Article • Scientific Reports, November 2024, Springer Science + Business Media

    Professor Ramin Hashemi

  17. Bond strength empirical-mathematical equation and optimization of Al1050/AISI304 bilayer sheets fabricated by cold roll bonding method

    Article • Journal of Sandwich Structures & Materials, September 2024, SAGE Publications

    Professor Ramin Hashemi

  18. Investigation of compressive strength of primitive geometries printed through the fused deposition modeling technique with different path patterns

    Article • Physica Scripta, September 2024, Institute of Physics Publishing

    Professor Ramin Hashemi

  19. Multipoint forming process of aluminum sheet considering its forming limit diagram: Experimental and numerical investigations

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, August 2024, SAGE Publications

    Professor Ramin Hashemi

  20. Does VIMC-FMC work well on highly ductile bimetal joints? An investigation on mixed mode I/II fracture of AA1050/Cu bimetal weakened by U-notches

    Article • Engineering Fracture Mechanics, August 2024, Elsevier

    Professor Ramin Hashemi

  21. Investigation and optimization on the formability of aluminum 1050/stainless steel 304L bilayer sheets fabricated by cold roll bonding considering the Box-Behnken method

    Article • Journal of Materials Research and Technology, July 2024, Elsevier

    Professor Ramin Hashemi

  22. Microstructure investigation and optimization of process parameters of ultrasonic welding for Al–Cu dissimilar joints using design of experiment

    Article • Journal of Materials Research and Technology, July 2024, Elsevier

    Professor Ramin Hashemi

  23. Notch strength evaluation for highly ductile Al/Cu bi-metal fabricated by the roll-bonding technique under pure mode I and pure mode II loading conditions

    Article • Theoretical and Applied Fracture Mechanics, June 2024, Elsevier

    Professor Ramin Hashemi

  24. Optimizing FDM process parameters: predictive insights through taguchi, regression, and neural networks

    Article • Physica Scripta, May 2024, Institute of Physics Publishing

    Professor Ramin Hashemi

  25. Study of single point incremental forming limits of Al 1050/Mg-AZ31B two-layer sheets fabricated by roll bonding technique: Finite element simulation and experiment

    Article • Journal of Materials Research and Technology, March 2024, Elsevier

    Professor Ramin Hashemi

  26. Experimental and Numerical Investigation of Forming Limit Diagrams during Single Point Incremental Forming for Al/Cu Bimetallic Sheets

    Article • Metals, February 2024, MDPI AG

    Professor Ramin Hashemi

  27. Deep Learning-Based Multi-Sensor Fusion for Process Monitoring: Application to Fused Deposition Modeling

    Article • Arabian Journal for Science and Engineering, November 2023, Springer Science + Business Media

    Professor Ramin Hashemi

  28. Revolutionary auxetic intravascular medical stents for angioplasty applications

    Article • Materials & Design, November 2023, Elsevier

    Professor Ramin Hashemi

  29. Structural, cell culture, antibacterial and in vitro bioactivity analysis of highly-ordered Al2O3 nanotube coating with decorated Ag2O nanoparticles on Ti-6Al-4V

    Article • Surfaces and Interfaces, November 2023, Elsevier

    Professor Ramin Hashemi

  30. A novel practical method for the production of Functionally Graded Materials by varying exposure time via photo-curing 3D printing

    Article • Journal of Manufacturing Processes, October 2023, Elsevier

    Professor Ramin Hashemi

  31. Printing strategies to fabricate a disk through the fused deposition modeling method

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, August 2023, SAGE Publications

    Professor Ramin Hashemi

  32. Experimental investigation of strain path effects on mechanical properties, forming limit curves, and texture evolution of AA1050 aluminum sheet

    Article • Journal of Central South University, August 2023, Springer Science + Business Media

    Professor Ramin Hashemi

  33. Investigation of microstructure evolution on the fracture toughness behaviour of brass/low carbon steel/brass clad sheets fabricated by cold roll bonding process

    Article • Journal of Materials Research and Technology, July 2023, Elsevier

    Professor Ramin Hashemi

  34. Systematic microstructure modification effect on nanomechanical, tribology, corrosion, and biomineralization behavior by optimized anodic alumina nanotubes coated Ti–6Al–4V alloy

    Article • Ceramics International, July 2023, Elsevier

    Professor Ramin Hashemi

  35. Novel hybrid 3D-printed auxetic vascular stent based on re-entrant and meta-trichiral unit cells: Finite element simulation with experimental verifications

    Article • Materials Today Communications, June 2023, Elsevier

    Professor Ramin Hashemi

  36. Experimental investigation of parameters in fused filament fabrication 3D printing process of ABS plus using response surface methodology

    Article • The International Journal of Advanced Manufacturing Technology, May 2023, Springer Science + Business Media

    Professor Ramin Hashemi

  37. Experimental and numerical study of microstructure, mechanical characteristics, and forming limit curve for Al 1050/ Mg-AZ31B two-layer sheets manufactured via roll bonding technique

    Article • Journal of Alloys and Compounds, May 2023, Elsevier

    Professor Ramin Hashemi

  38. Fabrication of AA1050/CP-Cu Bimetallic Tubes using Parallel Tube-Shaped Channel Angular Pressing Technique and Assessing its Mechanical Properties and Microstructure

    Article • Transactions of the Indian Institute of Metals, March 2023, Springer Science + Business Media

    Professor Ramin Hashemi

  39. Effects of strain path on the microstructure, tensile properties, and formability of Al/Mg roll-bonded sheets

    Article • Journal of Materials Research and Technology, March 2023, Elsevier

    Professor Ramin Hashemi

  40. The Role of Additive Manufacturing in the Age of Sustainable Manufacturing 4.0

    Article • January 2023, Springer Science + Business Media

    Professor Ramin Hashemi

  41. Effect of Rolling Process on Formability and Mechanical Properties of AA 1050/Mg AZ31B Bilayer Sheet

    Article • Journal of Materials Engineering and Performance, December 2022, Springer Science + Business Media

    Professor Ramin Hashemi

  42. Investigation of long short-term memory networks for real-time process monitoring in fused deposition modeling

    Article • Progress in Additive Manufacturing, December 2022, Springer Science + Business Media

    Professor Ramin Hashemi

  43. Predicting the forming limit diagram of the fine-grained AA 1050 sheet using GTN damage model with experimental verifications

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, December 2022, SAGE Publications

    Professor Ramin Hashemi

  44. In-plane energy absorption characteristics and mechanical properties of 3D printed novel hybrid cellular structures

    Article • Journal of Materials Research and Technology, September 2022, Elsevier

    Professor Ramin Hashemi

  45. Forming limit diagrams and mechanical properties of AA1050/Ti CP2 multilayered composite produced by the accumulative roll bonding technique

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, July 2022, SAGE Publications

    Professor Ramin Hashemi

  46. An investigation of constitutive modeling and 3D processing maps of Mg/HA composites for orthopedic applications

    Article • Journal of Materials Research and Technology, July 2022, Elsevier

    Professor Ramin Hashemi

  47. High cycle fatigue behavior of bimetallic Al 7025/CP-Mg rods produced by rotary swaging

    Article • Journal of Materials Research and Technology, July 2022, Elsevier

    Professor Ramin Hashemi

  48. Review of selective laser melting of magnesium alloys: advantages, microstructure and mechanical characterizations, defects, challenges, and applications

    Article • Journal of Materials Research and Technology, July 2022, Elsevier

    Professor Ramin Hashemi

  49. Study of forming limit curves and mechanical properties of three-layered brass (CuZn10)/ low carbon steel (St14) /brass (CuZn10) composite considering the effect of annealing temperature

    Article • Journal of Materials Research and Technology, May 2022, Elsevier

    Professor Ramin Hashemi

  50. Severe plastic deformation (SPD) of biodegradable magnesium alloys and composites: A review of developments and prospects

    Article • Journal of Magnesium and Alloys, April 2022, Elsevier

    Professor Ramin Hashemi

  51. A novel experimental approach in determining forming limit diagrams by considering the effect of normal pressure

    Article • International Journal of Material Forming, January 2022, Springer Science + Business Media

    Professor Ramin Hashemi

  52. Insight into the Influence of Punch Velocity and Thickness on Forming Limit Diagrams of AA 6061 Sheets—Numerical and Experimental Analyses

    Article • Metals, December 2021, MDPI AG

    Professor Ramin Hashemi

  53. Anisotropic Behavior of Al1050 through Accumulative Roll Bonding

    Article • Materials, November 2021, MDPI AG

    Professor Ramin Hashemi

  54. Study of mechanical properties and wear resistance of Al 1050/Brass (70/30)/Al 1050 composite sheets fabricated by the accumulative roll bonding process

    Article • Journal of Manufacturing Processes, November 2021, Elsevier

    Professor Ramin Hashemi

  55. DIC-based experimental study of fracture toughness through R-curve tests in a multi-layered Al-Mg (LZ91) composite fabricated by ARB

    Article • Journal of Alloys and Compounds, November 2021, Elsevier

    Professor Ramin Hashemi

  56. Finite element simulations and experimental verifications for forming limit curve determination of two-layer aluminum/brass sheets considering the incremental forming process

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, October 2021, SAGE Publications

    Professor Ramin Hashemi

  57. Finite Element Simulation of the Parallel Tubular Channel Angular Pressing Process for Al–Cu Bimetallic Tube with Experimental Verification

    Article • Transactions of the Indian Institute of Metals, September 2021, Springer Science + Business Media

    Professor Ramin Hashemi

  58. Effect of annealing on formability and mechanical properties of AA1050/Mg-AZ31B bilayer sheets fabricated by explosive welding method

    Article • The International Journal of Advanced Manufacturing Technology, September 2021, Springer Science + Business Media

    Professor Ramin Hashemi

  59. Effects of strain accumulation and annealing on interfacial microstructure and grain structure (Mg and Al3Mg2 layers) of Al/Cu/Mg multilayered composite fabricated by ARB process

    Article • Journal of Materials Research and Technology, September 2021, Elsevier

    Professor Ramin Hashemi

  60. The role of thickness on the fracture behavior of Al/Mg–Li/Al composite processed by cold roll bonding

    Article • Materials Science and Engineering A, September 2021, Elsevier

    Professor Ramin Hashemi

  61. An experimental investigation of mechanical properties, forming limit curves, and bending behavior of aluminum-polymer sandwich composites

    Article • Materials Research Express, August 2021, Institute of Physics Publishing

    Professor Ramin Hashemi

  62. Investigation of annealing treatment on the interfacial and mechanical properties of Al5052/Cu multilayered composites subjected to ARB process

    Article • Journal of Alloys and Compounds, August 2021, Elsevier

    Professor Ramin Hashemi

  63. Experimental study of the defects, mechanical and microstructural characteristics of friction-stir-welded Al 6061 sheets

    Article • Surface Topography Metrology and Properties, July 2021, Institute of Physics Publishing

    Professor Ramin Hashemi

  64. Formability of Tri-layered IF240/AZ31/IF240 Composite with Strong Bonding: Experimental and Finite Element Modeling

    Article • Journal of Materials Engineering and Performance, July 2021, Springer Science + Business Media

    Professor Ramin Hashemi

  65. A method and apparatus for determination of the ultrasonic-assisted forming limit diagram

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, May 2021, SAGE Publications

    Professor Ramin Hashemi

  66. Manufacturing of three-layered sandwich composite of AA1050/LZ91/AA1050 using cold roll bonding process

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, February 2021, SAGE Publications

    Professor Ramin Hashemi

  67. The role of applied strain and volume percentage of components on mechanical properties and fracture toughness in multilayered Al/Mg composite fabricated by the accumulative roll bonding process

    Article • Materials Research Express, February 2021, Institute of Physics Publishing

    Professor Ramin Hashemi

  68. Evaluation of forming limit diagrams using Nakazima out-of-plane test and incremental forming process for two-phase magnesium–lithium alloy sheet

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, February 2021, Springer Science + Business Media

    Professor Ramin Hashemi

  69. Analytical and numerical investigation of wrinkling limit diagram in deep drawing of two-layer sheets with experimental verification

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, January 2021, SAGE Publications

    Professor Ramin Hashemi

  70. Investigation of forming limit curves and mechanical properties of 316 stainless steel/St37 steel tailor-welded blanks produced by tungsten inert gas and friction stir welding method

    Article • CIRP Journal of Manufacturing Science and Technology, January 2021, Elsevier

    Professor Ramin Hashemi

  71. The influence of post-annealing and ultrasonic vibration on the formability of multilayered Al5052/MgAZ31B composite

    Article • Materials Science and Technology, January 2021, SAGE Publications

    Professor Ramin Hashemi

  72. Asymmetric accumulative roll bonding of aluminum/copper composite sheets

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, December 2020, SAGE Publications

    Professor Ramin Hashemi

  73. Experimental study of forming limit diagram and mechanical properties of aluminum foils processed by the accumulative roll bonding

    Article • Materials Research Express, December 2020, Institute of Physics Publishing

    Professor Ramin Hashemi

  74. Influences of the constrained groove pressing on microstructural, mechanical, and fracture properties of brass sheets

    Article • Materials Research Express, November 2020, Institute of Physics Publishing

    Professor Ramin Hashemi

  75. Experimental investigation of spring-back phenomenon through an L-die bending process for multilayered sheets produced by the accumulative press bonding technique

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, October 2020, SAGE Publications

    Professor Ramin Hashemi

  76. Comparison between Explosive Welding and Roll-Bonding Processes of AA1050/Mg AZ31B Bilayer Composite Sheets Considering Microstructure and Mechanical Properties

    Article • Journal of Materials Engineering and Performance, September 2020, Springer Science + Business Media

    Professor Ramin Hashemi

  77. Investigation of forming limit diagram and mechanical properties of the bimetallic Al/Cu composite sheet at different temperatures which fabricated by explosive welding

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, August 2020, SAGE Publications

    Professor Ramin Hashemi

  78. Flexible bending of rectangular profiles: numerical and experimental investigations

    Article • Journal of Manufacturing Processes, August 2020, Elsevier

    Professor Ramin Hashemi

  79. On the impacts of cutting parameters on surface roughness, tool wear mode and size in slot milling of A356 metal matrix composites reinforced with silicon carbide elements

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, July 2020, SAGE Publications

    Professor Ramin Hashemi

  80. Production of Al/Mg-Li composite by the accumulative roll bonding process

    Article • Journal of Materials Research and Technology, July 2020, Elsevier

    Professor Ramin Hashemi

  81. Experimental and numerical assessment of energy absorption capacity of thin-walled Al 5083 tube produced by PTCAP process

    Article • Transactions of Nonferrous Metals Society of China, May 2020, Elsevier

    Professor Ramin Hashemi

  82. Formability and fractography of AA5754/polyethylene/AA5754 sandwich composites

    Article • Mechanics Based Design of Structures and Machines, April 2020, Taylor & Francis

    Professor Ramin Hashemi

  83. Manufacturing of high-strength multilayered composite by accumulative roll bonding

    Article • Materials Research Express, January 2020, Institute of Physics Publishing

    Professor Ramin Hashemi

  84. The effect of temperature on the mechanical properties and forming limit diagram of aluminum strips fabricated by accumulative roll bonding process

    Article • Journal of Materials Research and Technology, December 2019, Elsevier

    Professor Ramin Hashemi

  85. The effect of temperature on the mechanical properties and forming limit diagram of Al 5083 produced by equal channel angular rolling

    Article • The International Journal of Advanced Manufacturing Technology, November 2019, Springer Science + Business Media

    Professor Ramin Hashemi

  86. Experimental and FE analysis on spring-back of copper/aluminum layers sheet for a L-die bending process

    Article • Materials Research Express, November 2019, Institute of Physics Publishing

    Professor Ramin Hashemi

  87. Prediction of FLD for sheet metal by considering through-thickness shear stresses

    Article • Mechanics Based Design of Structures and Machines, September 2019, Taylor & Francis

    Professor Ramin Hashemi, Mostafa Habibi

  88. Influence of ARB technique on the microstructural, mechanical and fracture properties of the multilayered Al1050/Al5052 composite reinforced by SiC particles

    Article • Journal of Materials Research and Technology, August 2019, Elsevier

    Professor Ramin Hashemi

  89. Investigation of mechanical properties, formability, and anisotropy of dual phase Mg–7Li–1Zn

    Article • Materials Research Express, July 2019, Institute of Physics Publishing

    Professor Ramin Hashemi

  90. Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels

    Article • Mechanics Based Design of Structures and Machines, July 2019, Taylor & Francis

    Professor Ramin Hashemi, Mohammad Sareban, Mostafa Habibi, ehsan sadeghi, Mahdi Alipour

  91. Evaluation of Temperature Effects on Forming Limit Diagrams of AA6061-T6 Considering the Marciniak and Kuczynski Model

    Article • Journal of Testing and Evaluation, June 2019, ASTM International

    Professor Ramin Hashemi

  92. Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC)

    Article • Journal of Central South University, June 2019, Springer Science + Business Media

    Professor Ramin Hashemi

  93. Using digital image correlation for characterizing the elastic and plastic parameters of ultrafine-grained Al 1050 strips fabricated via accumulative roll bonding process

    Article • Materials Research Express, May 2019, Institute of Physics Publishing

    Professor Ramin Hashemi

  94. Lubrication performance of rapeseed oil-based nano-lubricants in parallel tubular channel angular pressing process

    Article • Journal of Central South University, May 2019, Springer Science + Business Media

    Professor Ramin Hashemi

  95. A comprehensive study on the effect of heat treatment on the fracture behaviors and structural properties of Mg-Li alloys using RSM

    Article • Materials Research Express, April 2019, Institute of Physics Publishing

    Professor Ramin Hashemi

  96. Characterizing the elastic and plastic properties of the multilayered Al/Brass composite produced by ARB using DIC

    Article • Materials Science and Engineering A, April 2019, Elsevier

    Professor Ramin Hashemi

  97. Corrigendum to “Characterizing the elastic and plastic properties of the multilayered Al/Brass composite produced by ARB using DIC” [Mater. Sci. Eng.: A, 753, (10) (April 2019) 70–78]

    Article • Materials Science and Engineering A, April 2019, Elsevier

    Professor Ramin Hashemi

  98. Some Practical Aspects of Digital Image Correlation Technique to Evaluate Anisotropy Coefficient and Its Comparison with Traditional Method

    Article • Journal of Testing and Evaluation, January 2019, ASTM International

    Professor Ramin Hashemi

  99. Evaluation of fracture toughness and rupture energy absorption capacity of as-rolled LZ71 and LZ91 Mg alloy sheet

    Article • Materials Research Express, December 2018, Institute of Physics Publishing

    Professor Ramin Hashemi

  100. A comparative study of the extended forming limit diagrams considering strain path, through-thickness normal and shear stress

    Article • International Journal of Mechanical Sciences, November 2018, Elsevier

    Professor Ramin Hashemi

  101. Fracture toughness investigation of Al1050/Cu/MgAZ31ZB multi-layered composite produced by accumulative roll bonding process

    Article • Materials Science and Engineering A, September 2018, Elsevier

    Professor Ramin Hashemi

  102. Analysis of constrained groove pressing and constrained groove pressing-cross route process on AA5052 sheet for automotive body structure applications

    Article • Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, July 2018, SAGE Publications

    Professor Ramin Hashemi

  103. An Experimental Study of Fracture Toughness for Nano/Ultrafine Grained Al5052/Cu Multilayered Composite Processed by Accumulative Roll Bonding

    Article • Journal of Manufacturing Science and Engineering, July 2018, ASME International

    Professor Ramin Hashemi

  104. Evaluation of Microstructure and Mechanical Properties of Multilayer Al5052–Cu Composite Produced by Accmulative Roll Bonding

    Article • Powder Metallurgy and Metal Ceramics, July 2018, Springer Science + Business Media

    Professor Ramin Hashemi

  105. Microstructure and mechanical properties of Al/Cu/Mg laminated composite sheets produced by the ARB proces

    Article • International Journal of Minerals Metallurgy and Materials, May 2018, Springer Science + Business Media

    Professor Ramin Hashemi

  106. Effects of normal and through-thickness shear stresses on the forming limit curves of AA3104-H19 using advanced yield criteria

    Article • International Journal of Mechanical Sciences, March 2018, Elsevier

    Professor Ramin Hashemi

  107. Measurement of directional anisotropy coefficients for AA7020-T6 tubes and prediction of forming limit curve

    Article • The International Journal of Advanced Manufacturing Technology, February 2018, Springer Science + Business Media

    Professor Ramin Hashemi

  108. Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding

    Article • Journal of Manufacturing Processes, January 2018, Elsevier

    Professor Ramin Hashemi

  109. Experimental evaluation of forming limit diagram and mechanical properties of nano/ultra-fine grained aluminum strips fabricated by accumulative roll bonding

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), December 2017, Carl Hanser Verlag

    Professor Ramin Hashemi

  110. Experimental evaluation of the plane stress fracture toughness for ultra-fine grained aluminum specimens prepared by accumulative roll bonding process

    Article • Materials Science and Engineering A, December 2017, Elsevier

    Professor Ramin Hashemi

  111. Mechanical anisotropy in ultra-fine grained aluminium tubes processed by parallel-tubular-channel angular pressing

    Article • Materials Science and Technology, August 2017, Taylor & Francis

    Professor Ramin Hashemi

  112. Analysis and Simulation of Parallel Tubular Channel Angular Pressing of Al 5083 Tube

    Article • Transactions of the Indian Institute of Metals, April 2017, Springer Science + Business Media

    Professor Ramin Hashemi

  113. Strain measurement and determining coefficient of plastic anisotropy using digital image correlation (DIC)

    Article • Mechanics & Industry, January 2017, EDP Sciences

    Professor Ramin Hashemi

  114. Numerical and experimental study of bursting prediction in tube hydroforming of Al 7020-T6

    Article • Mechanics & Industry, January 2017, EDP Sciences

    Professor Ramin Hashemi

  115. Forming limit diagram of aluminum-copper two-layer sheets: numerical simulations and experimental verifications

    Article • The International Journal of Advanced Manufacturing Technology, October 2016, Springer Science + Business Media

    Professor Ramin Hashemi

  116. An Experimental, Analytical, and Numerical Investigation of Hydraulic Bulge Test in Two-Layer Al–Cu Sheets

    Article • Journal of Manufacturing Science and Engineering, October 2016, ASME International

    Professor Ramin Hashemi

  117. Forming limit curves analysis of aluminum alloy considering the through-thickness normal stress, anisotropic yield functions and strain rate

    Article • International Journal of Mechanical Sciences, October 2016, Elsevier

    Professor Ramin Hashemi

  118. Determination of forming limit curve in two-layer metallic sheets using the finite element simulation

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, August 2016, SAGE Publications

    Professor Ramin Hashemi

  119. Forming limit diagram of Al-Cu two-layer metallic sheets considering the Marciniak and Kuczynski theory

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, June 2016, SAGE Publications

    Professor Ramin Hashemi

  120. Forming limit diagrams of fine-grained Al 5083 produced by equal channel angular rolling process

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, June 2016, SAGE Publications

    Professor Ramin Hashemi

  121. Forming limit diagrams by including the M–K model in finite element simulation considering the effect of bending

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, April 2016, SAGE Publications

    Professor Ramin Hashemi

  122. Enhancing the Mechanical Properties and Formability of Low Carbon Steel with Dual-Phase Microstructures

    Article • Journal of Materials Engineering and Performance, January 2016, Springer Science + Business Media

    Professor Ramin Hashemi

  123. Evaluation of the microstructure and mechanical properties of the ultrafine grained thin-walled tubes processed by severe plastic deformation

    Article • Metals and Materials International, November 2015, Springer Science + Business Media

    Professor Ramin Hashemi

  124. Experimental studying of the effect of active area on the performance of passive direct methanol fuel cell

    Article • Ionics, June 2015, Springer Science + Business Media

    Professor Ramin Hashemi

  125. Numerical and experimental study of formability in deep drawing of two-layer metallic sheets

    Article • The International Journal of Advanced Manufacturing Technology, March 2015, Springer Science + Business Media

    Professor Ramin Hashemi

  126. Prediction of forming limit diagrams using the modified M-K method in hydroforming of aluminum tubes

    Article • International Journal of Material Forming, December 2014, Springer Science + Business Media

    Professor Ramin Hashemi

  127. Forming limit diagram of tubular hydroformed parts considering the through-thickness compressive normal stress

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, December 2014, SAGE Publications

    Professor Ramin Hashemi

  128. Experimental and theoretical investigation of strain path change effect on forming limit diagram of AA5083

    Article • The International Journal of Advanced Manufacturing Technology, September 2014, Springer Science + Business Media

    Professor Ramin Hashemi

  129. A Study on the Performance of a Solar Desiccant Cooling System by TRNSYS in Warm and Humid Climatic Zone of IRAN

    Article • International Journal of Advanced Science and Technology, August 2014, Science and Engineering Research Support Society

    Professor Ramin Hashemi

  130. A methodology for determination of extended strain-based forming limit curve considering the effects of strain path and normal stress

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, August 2014, SAGE Publications

    Professor Ramin Hashemi

  131. A different approach to estimate the process parameters in tube hydroforming

    Article • International Journal of Material Forming, May 2014, Springer Science + Business Media

    Professor Ramin Hashemi

  132. A simulation-based approach to the determination of forming limit diagrams

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, April 2014, SAGE Publications

    Professor Ramin Hashemi

  133. Analysis of the extended stress-based forming limit curve considering the effects of strain path and through-thickness normal stress

    Article • Materials & Design (1980-2015), February 2014, Elsevier

    Professor Ramin Hashemi

  134. Analysis of necking in tube hydroforming by means of extended forming limit stress diagram

    Article • Engineering Solid Mechanics, January 2014, Growing Science

    Professor Ramin Hashemi

  135. A Novel Approach to the Determination of Forming Limit Diagrams for Tailor-Welded Blanks

    Article • Journal of Materials Engineering and Performance, June 2013, Springer Science + Business Media

    Professor Ramin Hashemi

  136. The Effect of the Imposed Boundary Rate on the Formability of Strain Rate Sensitive Sheets Using the M-K Method

    Article • Journal of Materials Engineering and Performance, April 2013, Springer Science + Business Media

    Professor Ramin Hashemi

  137. The strain gradient approach to predict necking in tube hydroforming

    Article • Journal of Manufacturing Processes, January 2013, Elsevier

    Professor Ramin Hashemi

  138. An Incrementally Coupled Thermo-Electro-Mechanical Model for Resistance Spot Welding

    Article • Materials and Manufacturing Processes, December 2012, Taylor & Francis

    Professor Ramin Hashemi

  139. Forming Limit Diagrams of Ground St14 Steel Sheets with Different Thicknesses

    Article • SAE International Journal of Materials and Manufacturing, April 2012, SAE International

    Professor Ramin Hashemi

  140. Hydroforming Limits in Metal Bellows Forming Process

    Article • Materials and Manufacturing Processes, December 2010, Taylor & Francis

    Professor Ramin Hashemi

  141. Forming limit diagrams with the existence of through-thickness normal stress

    Article • Computational Materials Science, May 2010, Elsevier

    Professor Ramin Hashemi

  142. New formulation for vibration analysis of Timoshenko beam with double-sided cracks

    Article • STRUCTURAL ENGINEERING AND MECHANICS, March 2010, Techno-Press

    Professor Ramin Hashemi

  143. Using the finite element method for achieving an extra high limiting drawing ratio (LDR) of 9 for cylindrical components

    Article • CIRP Journal of Manufacturing Science and Technology, January 2010, Elsevier

    Professor Ramin Hashemi

  144. Implementation of the forming limit stress diagram to obtain suitable load path in tube hydroforming considering M–K model

    Article • Materials & Design (1980-2015), October 2009, Elsevier

    Professor Ramin Hashemi

  145. Finding the optimum Hill index in the determination of the forming limit diagram

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, July 2009, SAGE Publications

    Professor Ramin Hashemi

  146. Application of the hydroforming strain- and stress-limit diagrams to predict necking in metal bellows forming process

    Article • The International Journal of Advanced Manufacturing Technology, June 2009, Springer Science + Business Media

    Professor Ramin Hashemi

  147. An Analytical Approach in Prediction of Necking and Suitable Load Path in Tube Hydroforming by Using the Strain Gradient

    Article • April 2009, SAE International

    Professor Ramin Hashemi

  148. A methodology for prediction of forming limit stress diagrams considering the strain path effect

    Article • Computational Materials Science, April 2009, Elsevier

    Professor Ramin Hashemi

  149. Some numerical aspects of necking solution in prediction of sheet metal forming limits by strain gradient plasticity

    Article • Materials & Design (1980-2015), March 2009, Elsevier

    Professor Ramin Hashemi

  150. An improved strain gradient approach for determination of deformation localization and forming limit diagrams

    Article • Journal of Materials Processing Technology, February 2009, Elsevier

    Professor Ramin Hashemi

  151. The strain gradient approach for determination of forming limit stress and strain diagrams

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, April 2008, SAGE Publications

    Professor Ramin Hashemi