All Stories

  1. An Image-Based Impact Test for the High Strain Rate Tensile Properties of Brittle Materials
  2. Different methods are examined to identify heterogeneous stiffness
  3. Beyond Hopkinson's bar
  4. Latest Results in Novel Inertial High Strain Rate Tests
  5. Uncertainty Quantification in VFM Identification
  6. Determination of Anisotropic Plastic Constitutive Parameters Using the Virtual Fields Method
  7. Fast Fourier Virtual Fields Method for Determination of Modulus Distributions from Full-Field Optical Strain Data
  8. Assessment of the metrological performance of anin situstorage image sensor ultra-high speed camera for full-field deformation measurements
  9. Elastic stiffness characterization using three-dimensional full-field deformation obtained with optical coherence tomography and digital volume correlation
  10. Parameter Determination of Anisotropic Yield Criterion
  11. Performance Assessment of Inverse Methods in Large Strain Plasticity
  12. Impact damage detection in composite plates using deflectometry and the Virtual Fields Method
  13. Identification of Material Parameters of PVC Foams using Digital Image Correlation and the Virtual Fields Method
  14. Virtual Fields Method, The
  15. Identification of the Local Elasto-Plastic Behavior of FSW Welds Using the Virtual Fields Method
  16. Characterisation of the bending stiffness components of MDF panels from full-field slope measurements
  17. Composites Part A: Applied Science and Manufacturing
  18. Damage detection in composite materials using deflectometry, a full-field slope measurement technique
  19. Identification of the Heterogeneous Elasto-plastic Behaviour of FSW Welds at High Strain Rates
  20. Development of a Test Simulator to Perform Optimized Experiment Design
  21. Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains
  22. Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds
  23. Ultra-High-Speed Full-Field Deformation Measurements on Concrete Spalling Specimens and Stiffness Identification with the Virtual Fields Method
  24. On the use of simulated experiments in designing tests for material characterization from full-field measurements
  25. Identification of the Plastic Behaviour in the Post-Necking Regime Using a Three Dimensional Reconstruction Technique
  26. The Virtual Fields Method
  27. The Camfit Program
  28. Complements
  29. The VFM for Force Reconstruction
  30. The Principle of Virtual Work
  31. Introduction, Main Equations and Notations
  32. Fiber Composites
  33. Metals
  34. Soft and Biological Materials
  35. Other Materials
  36. The Linear Virtual Fields Method
  37. Case Study III: Orthotropic Plate in Pure Bending
  38. The Non-linear Virtual Fields Method
  39. Case Study II: Unnotched Iosipescu Test
  40. Design of New Tests for the VFM
  41. Case Study I: Standard and Funny Isotropic Discs
  42. Identifying Constitutive Parameters from Heterogeneous Strain Fields using the Virtual Fields Method
  43. The virtual fields method applied to spalling tests on concrete
  44. Characterizing elastic properties of superconducting windings by simulations and experiments
  45. Performances and Limitations of Three Ultra High-Speed Imaging Cameras for Full-Field Deformation Measurements
  46. Assessment of the Deformation of Low Density Polymeric Auxetic Foams by X-Ray Tomography and Digital Volume Correlation
  47. Local Elasto-Plastic Identification of the Behaviour of Friction Stir Welds with the Virtual Fields Method
  48. Identification of plastic constitutive parameters at large deformations from three dimensional displacement fields
  49. Dissipated energy measurements as a marker of microstructural evolution: 316L and DP600
  50. Texture evolution in Nd:YAG-laser welds of AZ31 magnesium alloy hot rolled sheets and its influence on mechanical properties
  51. Performance Assessment of Strain Measurement with an Ultra High Speed Camera
  52. Full-Field Strain Measurement On Titanium Welds And Local Elasto-Plastic Identification With The Virtual Fields Method
  53. Identification of material damping in vibrating plates using full-field measurements
  54. Dissipative energy: monitoring microstructural evolutions during mechanical tests
  55. Ultra high speed full-field strain measurements on spalling tests on concrete materials
  56. Dissipative energy as an indicator of material microstructural evolution
  57. Full-Field Strain Measurement and Identification of Composites Moduli at High Strain Rate with the Virtual Fields Method
  58. Ultra High Speed DIC and Virtual Fields Method Analysis of a Three Point Bending Impact Test on an Aluminium Bar
  59. Identification of the Mechanical Properties of Superconducting Windings Using the Virtual Fields Method
  60. Correlation between Full-Field Measurements and Numerical Simulation Results for Multiple Delamination Composite Specimens in Bending
  61. Identification of the Mechanical Properties of Superconducting Windings Using the Virtual Fields Method
  62. An alternative to modal analysis for material stiffness and damping identification from vibrating plates
  63. Identification of Poisson's ratios of standard and auxetic low-density polymeric foams from full-field measurements
  64. Experimental Energy Balance During the First Cycles of Cyclically Loaded Specimens Under the Conventional Yield Stress
  65. Measurement of Vibrating Plate Spatial Responses Using Deflectometry and High Speed Camera
  66. Mechanical properties of low density polymeric foams obtained from full-field measurements
  67. Dissipative energy as an indicator of material microstructural evolution
  68. Viscoelastic material properties’ identification using high speed full field measurements on vibrating plates
  69. Comparison of two approaches for differentiating full-field data in solid mechanics
  70. CompTest2008
  71. A novel method for measuring the through-thickness shear moduli of anisotropic plates from surface deformation measurements
  72. Local stiffness reduction in impacted composite plates from full-field measurements
  73. Variation of transverse and shear stiffness properties of wood in a tree
  74. Full-field evaluation of the onset of microplasticity in a steel specimen
  75. Identification of the mechanical behaviour of low density hyperelastic polymeric foams from full-field measurements
  76. Identification of material stiffness and damping in vibrating plates using full-field measurements
  77. Heat dissipation measurements in low stress cyclic loading of metallic materials: From internal friction to micro-plasticity
  78. Méthodologie d'identification du comportement mécanique des mousses hyperélastiques par mesures de champs et méthode inverse
  79. Identification of low density polyurethane foam properties by DIC and the virtual fields method
  80. Viscoelastic material properties' identification using full field measurements on vibrating plates
  81. The Virtual Fields Method for Extracting Constitutive Parameters From Full-Field Measurements: a Review
  82. Estimation of the strain field from full-field displacement noisy data. Comparing finite elements global least squares and polynomial diffuse approximation
  83. Identification of elasto-visco-plastic parameters and characterization of Lüders behavior using digital image correlation and the virtual fields method
  84. Application of full-field measurement techniques to composite materials and structures
  85. Inverse Problems in Experimental Mechanics
  86. Overview of Identification Methods of Mechanical Parameters Based on Full-field Measurements
  87. Identification of Materials Mechanical Properties from Full-Field Measurements: Latest Advances in the Virtual Fields Method
  88. 3D Heterogeneous Stiffness Reconstruction Using MRI and the Virtual Fields Method
  89. On the realization of microscopic grids for local strain measurement by direct interferometric photolithography
  90. Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part I: Methodology
  91. Stress Reconstruction and Constitutive Parameter Identification in Plane-Stress Elasto-plastic Problems Using Surface Measurements of Deformation Fields
  92. Software Implementation of the Virtual Fields Method
  93. Novel experimental approach for longitudinal-radial stiffness characterisation of clear wood by a single test
  94. Development of a Full-Field Displacement Measurement Technique at the Microscale and Application to the Study of Strain Fields in a Tensile Steel Specimen
  95. Identification of the Orthotropic Elastic Stiffnesses of Composites with the Virtual Fields Method: Sensitivity Study and Experimental Validation
  96. General framework for the identification of constitutive parameters from full-field measurements in linear elasticity
  97. A Procedure for Producing Reflective Coatings on Plates to be Used for Full-Field Slope Measurements by a Deflectometry Technique
  98. Refined experimental methodology for assessing the heat dissipated in cyclically loaded materials at low stress levels
  99. Identification of 3-D Heterogeneous Modulus Distribution With the Virtual Fields Method
  100. Identification of Strain-Rate Sensitivity With the Virtual Fields Method
  101. Identification of the Local Stiffness Reduction of Damaged Composite Plates Using Full-Field Measurements
  102. Evidence of Viscoelastic and Elasto-Plastic Dissipation in Metals by Measurements of the Thermal Energy Release in Cyclic Tensile Tests
  103. Identification of Elasto-Plastic Constitutive Parameters from Statically Undetermined Tests Using the Virtual Fields Method
  104. The Virtual Fields Method for Extracting Constitutive Parameters From Full-Field Measurements: a Review
  105. Material Properties' Identification Using Full Field Measurements on Vibrating Plates
  106. Optimization of the Unnotched Iosipescu Test on Composites for Identification from Full-Field Measurements
  107. Material Properties' Identification Using Full Field Measurements on Vibrating Plates
  108. Optimization of the Unnotched Iosipescu Test on Composites for Identification from Full-Field Measurements
  109. Stiffness and Damping Identification from Full Field Measurements on Vibrating Plates
  110. Optical full-field measurement of strain at a microscopic scale with the grid method
  111. Influence of specimen preparation by machining on the failure of polymer matrix off-axis tensile coupons
  112. Dissipative Behaviour of Metallic Materials in Low Stress Cyclic Loading
  113. Experimental Application of the Virtual Fields Method to the Identification of Material Properties Using Vibrating Plates
  114. Experimental Application of the Virtual Fields Method to Elasto-Plastic Behaviour
  115. Identification of the Through-Thickness Orthotropic Stiffness of Composite Tubes from Full-Field Measurements
  116. Characterization of the Nonlinear Shear Behaviour of UD Composite Materials Using the Virtual Fields Method
  117. Applying the Virtual Fields Method to the identification of elasto-plastic constitutive parameters
  118. The virtual fields method with piecewise virtual fields
  119. Identification of the through-thickness rigidities of a thick laminated composite tube
  120. CompTest 2004
  121. Identification of stiffness and damping properties of thin isotropic vibrating plates using the virtual fields method: theory and simulations
  122. Usinabilité à grande vitesse et à sec des couches du rechargement base-nickel par soudage d'outillage à chaud
  123. Edge machining effects on the failure of polymer matrix composite coupons
  124. CompTest 2003
  125. Sensitivity of the virtual fields method to noisy data
  126. Numerical issues in the virtual fields method
  127. Special virtual fields for the direct determination of material parameters with the virtual fields method. 3. Application to the bending rigidities of anisotropic plates
  128. Simultaneous identification of stiffness and damping properties of isotropic materials from forced vibrating plates
  129. Reduction of tool wear in metal cutting using external electromotive sources
  130. Identification d'une loi de Fick 3D anisotrope : théorie et validation
  131. Identification directe du comportement élastique endommageable de matériaux composites par la méthode des champs virtuels
  132. Champs virtuels spéciaux pour l'extraction de paramètres de lois de comportement : exemple de la flexion faible des plaques anisotropes
  133. A Novel Procedure for Identification of 3D Moisture Diffusion Parameters on Thick Composites: Theory, Validation and Experimental Results
  134. Special virtual fields for the direct determination of material parameters with the virtual fields method. 1––Principle and definition
  135. Special virtual fields for the direct determination of material parameters with the virtual fields method. 2––Application to in-plane properties
  136. L'identification des propriétés mécaniques de matériaux avec la méthode des champs virtuels, une alternative au recalage par éléments finis
  137. Applying the virtual fields method to determine the through-thickness moduli of thick composites with a nonlinear shear response
  138. Identification of the through-thickness properties of thick laminated tubes using the virtual fields method
  139. A Numerical and Experimental Study of Woven Composite Pin-Joints
  140. Response to the discussion of the paper “Novel procedure for complete in-plane composite characterization using a single T-shaped specimen”
  141. A Numerical and Experimental Study of Woven Composite Pin-Joints
  142. Novel procedure for complete in-plane composite characterization using a single T-shaped specimen
  143. Discussion of the Article: "Biaxial Testing of Unidirectional Carbon-Epoxy Composite Using Biaxial Iosipescu Test Fixture"
  144. Saint-Venant Effects in the Iosipescu Specimen
  145. A T-shaped specimen for the direct characterization of orthotropic materials
  146. Measurement of the in-plane shear strengths of unidirectional composites with the Iosipescu test
  147. Direct identification of an in-plane orthotropic law from a single test
  148. New Ideas on the Measurement of the In-Plane Shear Strength of Unidirectional Composites
  149. Discussion of the article, “experimental strain analysis of the Iosipescu shear test specimen”
  150. The 10 ° off-axis tensile test: A critical approach
  151. The losipescu in-plane shear test: Validation on an isotropic material
  152. Accurate comparative determination of the in-plane shear modulus of T300/914 by the iosipescu and 45° off-axis tests
  153. The Iosipescu in-plane shear test applied to composites: A new approach based on displacement field processing